Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 152/2212 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

  • How do you set up DNS in Window Server 2008 in a Hyper-V environment?

    - by Nathan DeWitt
    I have a laptop running Server 2008 and Hyper-V. I have created a virtual machine that is also running Server 2008, that I used dcpromo to create as a domain controller. I disabled IPv6 because I had no idea how to enter a default address, and I just wanted to make a standalone MOSS dev environment. I have tried every combination of creating a virtual network on the host and then connecting to that in the VM, but I can't get the VM to communicate with the host and vice versa. No pinging, no copy and paste, nothing. Thanks. To update: My VM (which is its own DC) currently does not have a static IP. When I set the IP to static, I could not find anything that would let it talk to the host machine.

    Read the article

  • How do I set zone priority in Microsoft DNS?

    - by Justin
    I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

    Read the article

  • How ssl is usually set up on shared hosting (newbie question)?

    - by spirytus
    I am quite unclear on how ssl is usually set up on shared hosting. I have account with justhost.com and they provided me with public_html folder and (its sibling) ssl folder. When I create ssl certificates via cPanel it appears in SSL folder. Now, where I should put my html files to be accessible via https:// rather than http? normal files go into public_html (I figured this out ;) what about secure bunch? Also how can I specify that secured folder shouldn't be the ssl folder (if its the one in fact) but rather some other folder I specify? Is it possible at all with shared hosting? Thank you all for your help, I googled for hours and still am heavily confused as you see :)

    Read the article

  • How to set up my network/bridging using Apple Airport equipment?

    - by John
    I'd like to set up my network like this, and I want to make sure it's possible using the hardware I have. I think it should be... I've got my cable modem in one room. I want to plug it into an Apple Airport Express and create my wireless my wireless network here. The airport express will do the NAT and DHCP. By my TV there are a few things to be networked (Xbox and Tivo). I have an airport extreme here. I'd like to have the airport extreme join the wireless network and share the connection to the ethernet ports. Can anyone provide some assistance on the best way to configure to do this? Thanks!

    Read the article

  • How to set IP address of Amazon EC2 instance to its Elastic IP?

    - by TWord
    Hi, I have an Amazon EC2 instance running and I am installing a program on it that needs to know what the machine's IP address is. Can I set the Elastic IP address to the IP address within the EC2 instance? Its okay if it reroutes data packets somewhere 'outside' and then back to itself, but the software NEEDs me to specify an IP address of the machine its on. I proceeded with the software installation using the "local IP" (10.xx.xx.xx) within the software installation. I don't know if this is the reason why the application is not visible publicly (as I'm trying to determine in the question http://serverfault.com/questions/166946/allowing-web-access-to-an-amazon-ec2-windows-server-2008-instance-running-tomcat)

    Read the article

  • How can I set up a rule in outlook for an alias account?

    - by lucy
    I have 4 email aliases that all deliver to the same outlook inbox. 2 of them are stop@ addresses to be included in a mailing unubscribe link. Using the simple rules in outlook doesnt work, unless we set them to move emails titled stop, but for ease of unsubscribing, we do not want responders to have to do anything other than send a blank email to the stop@ address. Our IT guy tried to sort this out, by setting up a rule that all emails sent to stop@ got into a specified folder (stop folder created within inbox), but now, all that happens is all my emails go into the wrong boxes!!! Any help would be appreciated

    Read the article

  • How to set up a DNS name server to always resolve to a constant IP address for every request

    - by Andy Higgins
    I am looking for a simple DNS name server set up to always return the same IP address no matter what the request is. The reason for this is we are a domain registrar and when a domain is first registered we need it to have valid name servers (and don't want to have to first create name server records before registering a domain). We will then subsequently change the name server records after the domain has been registered. I assume this is possible to do with bind but was wondering if there might be a simpler solution available using one of the more light weight name servers out there? Any suggestions on how to accomplish this in a simple manner will be appreciated.

    Read the article

  • How can I avoid permission denied errors when attempting to deploy a rails app with capistrano?

    - by joshee
    Total noob here. I'm attempting to deploy an app through Capistrano. I'm getting relentless permission denied errors when I attempt to run cap deploy:update. Seemingly at least some of these errors are due to missing directories that trigger a "Permission Denied" error. (I'm doing setup on root just temporarily.) set :user, 'root' set :domain, 'domainname.com' set :application, 'appname' # adjust if you are using RVM, remove if you are not $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require "rvm/capistrano" set :rvm_ruby_string, '1.9.2' # file paths set :repository, "ssh://[email protected]/~/git/appname.git" set :deploy_to, "/var/rails/appname" # distribute your applications across servers (the instructions below put them # all on the same server, defined above as 'domain', adjust as necessary) role :app, domain role :web, domain role :db, domain, :primary => true set :deploy_via, :remote_cache set :scm, 'git' set :branch, 'master' set :scm_verbose, true set :use_sudo, false set :rails_env, :production namespace :deploy do desc "cause Passenger to initiate a restart" task :restart do run "touch #{current_path}/tmp/restart.txt" end desc "reload the database with seed data" task :seed do run "cd #{current_path}; rake db:seed RAILS_ENV=#{rails_env}" end end after "deploy:update_code", :bundle_install desc "install the necessary prerequisites" task :bundle_install, :roles => :app do run "cd #{release_path} && bundle install" end Here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/shared/cached-copy'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly I'm able to ssh without a password, so not sure about that publickey error. By the way, if I run cap deploy:update without set :deploy_via, :remote_cache, here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/releases/20120326204237'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly command finished Thanks a lot for your help with this.

    Read the article

  • How do I set my router up to authenticate with my service provider?

    - by João Lourenço
    Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

    Read the article

  • Using a AWS EC2 Server to host a busy website and I need to set up a loadbalancing

    - by Philip Isaacs
    My company has one EC2 server running on AWS with a MYSQL-DB and Apache on the same instance. This one instance hosts a website built on PHP Zend Framework. The site runs like crap when it starts to get busy with a lot of traffic so I'm looking for some advice on how to set up something that can handle the load better. My first question is should I move the mysql DB on to a separate EC2 instance or perhaps use AWS's RDS service which looks like a nice option. I'm sort of new to some of this but I'm guessing I'll need at least two EC2 instances for serving the website from and some sort of load balancing mechanism to distribute traffic. But maybe not, I'm not sure. Also what are some best practices for how to replicate the data so that they stay in sync on both instances? Okay I know these are a lot of questions. But I don't know where to start so any advice will help.

    Read the article

  • How to troubleshoot git "unable to set permission" on adding project?

    - by Brian Knoblauch
    Finally decided to move from Subversion to Git, but am having problems with my first project. Did my "git init" and am trying to do a "git add" of my project, but it's failing with: $ git add . error: unable to set permission to '.git/objects/6b/6018c1c76dc5ec159d5cb65bab72 fa300d52f6' error: build.xml: failed to insert into database error: unable to index file build.xml fatal: adding files failed I have full permissions to the directories in question. The only odd thing about it is that it's a drive mounted (and mapped) from a server over CIFS. No problems creating/editing files/permissions with other applications. The host is Windows Vista x64 and I'm running git under Cygwin. Server is Windows 2008. Any other ideas on what I might be doing wrong?

    Read the article

  • How to set which IP to use for a HTTP request?

    - by GetFree
    This is probably a silly question. I'm doing some http requests using wget from the command line, and I want those connections to be made through one specific IP of the 4 IPs my server has. Those http requests go to one specific range of IPs so I only want those to be routed differently. The 4 interfaces in my server are eth0, eth0:0, eth0:1, eth0:2. I tried with the following command: route add -net 192.164.10.0/24 dev eth0:0 But when I see the routing table it says: Destination Gateway Genmask Flags MSS Window irtt Iface 192.164.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 The interface is set to eth0 not eth0:0 as my command says. What am I doing wrong?

    Read the article

  • What is the best IP/Subnet set up strategy for a multi-server webhosting setup?

    - by Roy Andre
    Sorry for the mixed-up title, but let me try to explain better: We run a hosting solution, which until now has supported shared hosting and VPSes. Easy enough. We are now getting larger clients which require a more complex setup. We have more or less settled the server-setup itself, which will consist of: 1-2 Frontend Proxy/Load balancing servers 2+ Application servers 1 Database server 1 optional Memcached server The issue we are dealing with is to agree on a flexible and easy-to-maintain IP setup. So far we've been into VLAN'ing the internal servers in its own subnet, we've though of assigning an official IP to each server, and so on. What will be the best approach here? Any best practices? Using one official IP on the Frontend server, and then just set up an internal subnet for the servers behind that? We could then just NAT in any eventual sources required to access for instance the DB server directly over 3306.

    Read the article

  • How to set up Pegasus Mail in non-admin account?

    - by thursdaysgeek
    I'm using Pegasus Mail for my mail client, and on my old computer (XP Pro), I could log in as the guest or admin account and it would still work. I recently got a new computer, with XP Pro, and I've set the mail client to work fine when I log in to the admin account, but when I log into the guest account, it always wants the SMTP, POP, and other connection information. How do I get it to remember that? I tried making an admin account, setting it up, and then downgrading that account, but that didn't work either. Does anyone even use PMail?

    Read the article

  • Linux: set up media server to stream video via the Internet?

    - by Hassan
    How do I set up a media server in Linux which streams video over the internet? Is it easy to do this? I want a server that will actually encode video in real time to allow it to stream over sometimes slow or unreliable networks. Basically, I want a server that works on the internet. I have a directory with a bunch of video files, and want to make this accessible to myself remotely. For other situations, I found great and useful software (such as the PS3 media server). I'd like to find something equally as useful for streaming video over the internet.

    Read the article

  • Is there DBus command to set position of KDE panel?

    - by Liss
    I have single vertical KDE panel. When I switch from single monitor X screen back to triple monitor X screen (with xrandr) my KDE panel ends up on the right edge of middle monitor, instead of right edge of right monitor. Also, many windows are in wrong place after the switch, but I have a script which restores geometry of all windows (as is used to be in triple monitor state before I switched to single monitor mode), so this is not a problem. Unfortunately, it does not work for KDE panel - it stays in the wrong place. I guess I need to use DBus to restore KDE panel position (programmatically move it to right edge of right screen), I tried googling, but it seems it is not very well documented. Is there DBus command to set position of KDE panel?

    Read the article

  • File permission set to 644 and wordpress cannot access them?

    - by Joel
    Hi everyone, I'm having problems with WordPress not be able to access files. When installing certain themes and plugins, it comes up with an error saying that it cannot create the directory. When I try to edit style.css it says that I need to make that file writable. The file permissions were set to 644. It wouldn't work until I changed the settings to 777 or 776. WordPress was installed by our local ISP. Anyone got any ideas? It seems that WordPress has not been setup properly. Is there anyway I can fix this without reinstalling the whole thing? Thanks, Joel

    Read the article

  • How to set default permissions for automounted FAT drives in Ubuntu 9.10?

    - by piman
    I've got many FAT32 drives that I'd like to mount in Ubuntu such that they have permission mode 700 for directories and 600 for all other files. By default, they have 755 for all files, which is not particularly useful since almost no non-directories should be executable, and it screws up version control repos hosted on the drives. "Back in the day" I would have had the drives listed in /etc/fstab with the umask/dmask I want and there was no such thing as a default. These days, drives automount under their volume names. Which is great, except now I have no idea how to set the default. I have tried changing the /system/storage/default_options/vfat/mount_options gconf key with no apparently effect. It was 077 initially but the mounted drive reflected a default of 022; changing it and re-inserting the drives resulted in the files still having permission bits of 755.

    Read the article

  • Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

    - by thecraic
    I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

    Read the article

  • I'm trying to set up a LAMP server so it's totally anonymous, any suggestions?

    - by flexterra
    I'm going to set up a web service which will use the LAMP stack. One of the most important features of the site is that it should be anonymous. We thought that a cool thing will be if the server didn't made any logs that could potentially identify a user. I'm working on a web app for a news organization. They want a site to allow people to sumbit news leads and tips (text / files) to journalists. We think if we can provide good anonymity people will be more inclined to provide information. We will also teach how to use stuff like TOR as an extra precaution for whistleblowers Is this even possible? Any suggestions of obscure things we should look into?

    Read the article

  • In Opera 11, how can I set up shortcuts to switch to specific tabs?

    - by gphilip
    In Firefox on Linux, we can use Alt+1, Alt+2, etc. to switch to the first, second, etc. tabs, till the 9th tab. This is very useful to switch between tabs. In Opera 11 on Linux, I couldn't find a way to do this: the only way to switch among tabs seems to be to use Ctrl+Tab and then cycle till we reach the tab that we want. Needless to say, this "linear access" method is slower (and more annoying) than the random access available in FF. So my question is: How can I set up shortcuts in Opera 11 on Linux so that I can switch to one of the first nine tabs using a numbered shortcut?

    Read the article

  • Can you set up a Linode VPS as a reseller type scenario?

    - by MAZUMA
    First, I'm a fairly green on this subject. So, go easy. I do web design and development and would like to set up a way to be the central host so to speak for my clients. Currently they are scattered across multiple hosting companies. I've looked at some the cheapy options like a LunarPages and some of the more robust options like RackSpace Cloud and Linode. RackSpace has a reseller program, but it's managed and more at the top end on cost. I'm not seeing any type of reseller program in place for Linode. Can I purchase a higher Linode plan and use Apache2's VirtualHost configuration to handle multiple domains (about 8 domains, but hopefully will grow.). Or, am I not thinking about this correctly?

    Read the article

  • How do i know if i set up the nlb (network load balancing) cluster correctly???

    - by letseatlunch
    So ill start from the very beginning. I'm working on a web conference were we are going to show about 12 videos for a total of about half a gig for all 12. Since all the participants are going to be watching (and also streaming/downloading) at once it was recommended we set up a server farm. So i have 4 servers that i am trying to network together. They are all running Microsoft Server 2008 and i have spent the last three days setting them up and now that its done i want to make sure its all ready to go. so i just want to be sure that everything is setup the way that i think it is. What is the best way to do this. Really i want to make sure that the load will be split over the servers when its showtime. thanks for any help in advance letseatlunch Dave

    Read the article

  • Disadvantages of using a swap file/partition on an SSD, even when swappiness is set to 0

    - by pjv
    What are the disadvantages of using a swap file/partition on an SSD, even when swappiness is set to 0 I'm particularly interested in the /proc/sys/vm/swappiness=0 case. How much writes are still done, in practice, to that swap file, and does it have a negative impact to the SSD or any other disadvantage? Or would it nearly compare to not having a swap file? I am pretty aware of what swappiness=0 means, just not of what it amounts to in practice. My question stems from a problem I am experiencing without a swap: http://stackoverflow.com/questions/4567972/error-executing-aapt-all-of-the-sudden. There are similar questions regarding SSD and swap but they don't go in-depth into the swappiness=0: Disadvantages of not having a swap partition, Should I keep my swap file on an SSD drive?

    Read the article

  • How to set the relevance of emails in Outlook?

    - by Grastveit
    Mails in outlook have a relevance-field that can be displayed as a column in the inbox. How do one set it? Edit: More precisely, how are the values of custom e-mail-fields changed through the outlook 2007 gui? Here relevance and a custom field 'Score' is shown in my inbox, but all emails have blank values. The context-menu of emails give access to "Message Options...". I was hoping the custom fields would be available there.

    Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >