pre production - Page 152

Using Upstart to manage Unicorn w/ rbenv + bundler binstubs w/ ruby-local-exec shebang

- by codykrieger

Alright, this is melting my brain. It might have something to do with the fact that I don't understand Upstart as well as I should. Sorry in advance for the long question. I'm trying to use Upstart to manage a Rails app's Unicorn master process. Here is my current /etc/init/app.conf: description "app" start on runlevel [2] stop on runlevel [016] console owner # expect daemon script APP_ROOT=/home/deploy/app PATH=/home/deploy/.rbenv/shims:/home/deploy/.rbenv/bin:$PATH $APP_ROOT/bin/unicorn -c $APP_ROOT/config/unicorn.rb -E production # >> /tmp/upstart.log 2>&1 end script # respawn That works just fine - the Unicorns start up great. What's not great is that the PID detected is not of the Unicorn master, it's of an sh process. That in and of itself isn't so bad, either - if I wasn't using the automagical Unicorn zero-downtime deployment strategy. Because shortly after I send -USR2 to my Unicorn master, a new master spawns up, and the old one dies...and so does the sh process. So Upstart thinks my job has died, and I can no longer restart it with restart or stop it with stop if I want. I've played around with the config file, trying to add -D to the Unicorn line (like this: $APP_ROOT/bin/unicorn -c $APP_ROOT/config/unicorn.rb -E production -D) to daemonize Unicorn, and I added the expect daemon line, but that didn't work either. I've tried expect fork as well. Various combinations of all of those things can cause start and stop to hang, and then Upstart gets really confused about the state of the job. Then I have to restart the machine to fix it. I think Upstart is having problems detecting when/if Unicorn is forking because I'm using rbenv + the ruby-local-exec shebang in my $APP_ROOT/bin/unicorn script. Here it is: #!/usr/bin/env ruby-local-exec # # This file was generated by Bundler. # # The application 'unicorn' is installed as part of a gem, and # this file is here to facilitate running it. # require 'pathname' ENV['BUNDLE_GEMFILE'] ||= File.expand_path("../../Gemfile", Pathname.new(__FILE__).realpath) require 'rubygems' require 'bundler/setup' load Gem.bin_path('unicorn', 'unicorn') Additionally, the ruby-local-exec script looks like this: #!/usr/bin/env bash # # `ruby-local-exec` is a drop-in replacement for the standard Ruby # shebang line: # # #!/usr/bin/env ruby-local-exec # # Use it for scripts inside a project with an `.rbenv-version` # file. When you run the scripts, they'll use the project-specified # Ruby version, regardless of what directory they're run from. Useful # for e.g. running project tasks in cron scripts without needing to # `cd` into the project first. set -e export RBENV_DIR="${1%/*}" exec ruby "$@" So there's an exec in there that I'm worried about. It fires up a Ruby process, which fires up Unicorn, which may or may not daemonize itself, which all happens from an sh process in the first place...which makes me seriously doubt the ability of Upstart to track all of this nonsense. Is what I'm trying to do even possible? From what I understand, the expect stanza in Upstart can only be told (via daemon or fork) to expect a maximum of two forks.

Read the article

Minecraft server Rkit ubuntu upstart [closed]

- by user1637491

I have an Intel server running Ubuntu Server 12.04.1 I am working on moving my CraftBukkit Minecraft Server to the new platform. I read the upstart ubuntu cookbook and wrote a .conf file I have a minecraft user (named minecraft) and its home Directory is /home/minecraft it contains prwxrwxrwx 1 minecraft minecraft 0 Sep 19 14:49 command-fifo drwx------ 8 minecraft minecraft 4096 Sep 19 14:50 HDsaves drwx------ 2 minecraft minecraft 4096 Aug 31 15:13 logrolls -rw-r--r-- 1 root root 5 Sep 19 14:49 minecraft.pid drwxrwxrwx 8 minecraft minecraft 180 Sep 19 14:49 ramdisk -rw------- 1 minecraft minecraft 119 Sep 19 10:34 save.sh drwxrwxrwx 9 minecraft minecraft 4096 Sep 19 14:50 server -rw-rw-r-- 1 minecraft minecraft 44 Aug 31 11:40 shutdown.sh the server directory contains drwxrwxrwx 6 minecraft minecraft 4096 Aug 30 13:32 Backups -rwxrwxrwx 1 minecraft minecraft 0 Sep 18 12:26 banned-ips.txt -rwxrwxrwx 1 minecraft minecraft 17 Sep 18 12:26 banned-players.txt drwxrwxrwx 4 minecraft minecraft 4096 Aug 30 12:26 buildcraft -rwxrwxrwx 1 minecraft minecraft 1447 Sep 18 12:26 bukkit.yml -rwxrwxrwx 1 minecraft minecraft 0 Aug 30 11:05 command-fifo drwxrwxrwx 2 minecraft minecraft 4096 Aug 30 12:26 config lrwxrwxrwx 1 minecraft minecraft 23 Sep 19 14:49 craftbukkit.jar -> ramdisk/craftbukkit.jar -rwxrwxrwx 1 minecraft minecraft 17419 Sep 18 12:26 ForgeModLoader-0.log -rwxrwxrwx 1 minecraft minecraft 17420 Sep 18 12:24 ForgeModLoader-1.log -rwxrwxrwx 1 minecraft minecraft 17420 Sep 18 11:53 ForgeModLoader-2.log -rwxrwxrwx 1 minecraft minecraft 2576 Aug 30 11:05 help.yml drwxrwxrwx 2 minecraft minecraft 4096 Aug 30 12:31 lib drwxrwxrwx 3 minecraft minecraft 4096 Sep 19 14:49 logrolls -rwxrwxrwx 1 minecraft minecraft 200035 Sep 4 17:58 Minecraft_RKit.jar lrwxrwxrwx 1 minecraft minecraft 12 Sep 19 14:49 mods -> ramdisk/mods -rwxrwxrwx 1 minecraft minecraft 5 Sep 18 12:26 ops.txt -rwxrwxrwx 1 minecraft minecraft 0 Aug 30 11:05 permissions.yml lrwxrwxrwx 1 minecraft minecraft 15 Sep 19 14:49 plugins -> ramdisk/plugins lrwxrwxrwx 1 minecraft minecraft 16 Sep 19 14:49 redpower -> ramdisk/redpower -rw-r--r-- 1 root root 255 Sep 19 15:10 server.log -rwxrwxrwx 1 minecraft minecraft 464 Sep 8 11:09 server.properties drwxrwxrwx 3 minecraft minecraft 4096 Sep 5 16:05 SpaceModule drwxrwxrwx 3 minecraft minecraft 4096 Aug 30 13:07 toolkit -rwxrwxrwx 1 minecraft minecraft 1433 Sep 14 21:04 wepif.yml -rwxrwxrwx 1 minecraft minecraft 0 Sep 18 12:26 white-list.txt lrwxrwxrwx 1 minecraft minecraft 13 Sep 19 14:49 world -> ramdisk/world lrwxrwxrwx 1 minecraft minecraft 20 Sep 19 14:49 world_nether -> ramdisk/world_nether lrwxrwxrwx 1 minecraft minecraft 21 Sep 19 14:49 world_the_end -> ramdisk/world_the_end the startup .conf file: # Starts the minecraft server after loading JRE from ramdisk # # for now im still working on it description "minecraft-server" start on filesystem or runlevel [2345] stop on runlevel [!2345] oom score -999 kill timeout 60 pre-start script sh /usr/lib/jvm/java.sh end script script cd /home/minecraft echo "$(date) Starting minecraft" sudo cp -r /home/minecraft/HDsaves/* ramdisk sudo chown -R minecraft:minecraft ramdisk sudo chmod -R 777 ramdisk sudo ln -sf ramdisk/* server sudo chown -R minecraft:minecraft server sudo chmod -R 777 server sudo mv server/server.log server/logrolls/ zip server/logrolls/temp.zip server/logrolls/server.log sudo mv server/logrolls/temp.zip server/logrolls/"$(date)".log.zip sudo rm server/logrolls/server.log sudo rm -f command-fifo sudo mkfifo command-fifo sudo chown minecraft:minecraft command-fifo sudo chmod 777 command-fifo echo "$(date) Root commands finished" echo "$(date) Starting Wrapper" cd server sudo -u minecraft java -Xmx30M -Xms30M -XX:MaxPermSize=40M -Djava.awt.headless=true -jar Minecraft_RKit.jar timv:*spoilers* <> /home/minecraft/command-fifo & sudo echo $! >| /home/minecraft/minecraft.pid echo "$(date) Minecraft Started" end script pre-stop script cd /home/minecraft PID=`cat minecraft.pid` if [ "$PID" != "" ]; then echo "Stopping MineCraft Server PID=$PID" sudo echo save-all >> command-fifo sudo echo .stopwrapper >> command-fifo wait $PID sudo rm minecraft.pid sudo rsync -rt --delete ramdisk/* HDsaves/ echo "$(date) ramdisk save complete" echo "MineCraft save-shutdown complete." else echo "MineCraft not running" fi end script so when I start it up the upstart gererated log says: Wed Sep 19 14:49:30 CDT 2012 Starting minecraft adding: server/logrolls/server.log (stored 0%) Wed Sep 19 14:49:56 CDT 2012 Root commands finished Wed Sep 19 14:49:56 CDT 2012 Starting Wrapper Wed Sep 19 14:49:56 CDT 2012 Minecraft Started

Read the article

what is the best mid/high-end class audio/music creation audio sound card?

- by Chris

Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

Read the article

Putting indexes in separate filegroup kills our queries

- by womp

Can anyone shed some light on this? On our dev boxes, our database resides entirely in the PRIMARY filegroup, and everything works fine. On one of our production servers, recently upgraded from 2005 to 2008, we noticed it was performing slower than it should. On this machine, there are two filegroups - PRIMARY and INDEXES. Both filegroups contain 1 file per logical volume, one logical volume per CPU, (and each logical volume is a RAID 10 of 4 physical disks). We isolated a few queries that were performing fast on the dev boxes and slow (up to 40x slower) on the production machine. Turned out these queries were using the non-clustered indexes that resided in the INDEXES filegroup. Tweaking some of the queries to only use clustered indexes that were in the PRIMARY filegroup dropped their times back to normal. As a final confirmation, we redeployed the same database on the same machine to have everything in PRIMARY, and things went back to normal! Here's the statistics output of one of the queries, run identically on the machine with different filegroup configurations (table names changed to protect the innocent): FAST (everything in PRIMARY filegroup): (3 row(s) affected) Table '0'. Scan count 2, logical reads 14, ... Table '1'. Scan count 0, logical reads 0, ... Table '1'. Scan count 0, logical reads 0, ... Table '2'. Scan count 2, logical reads 7, ... Table '3'. Scan count 2, logical reads 1012, ... Table '4'. Scan count 1, logical reads 3, ... SQL Server Execution Times: CPU time = 437 ms, elapsed time = 445 ms. SLOW (indexes split into their own filegroup): (3 row(s) affected) Table '0'. Scan count 209, logical reads 428, ... Table '1'. Scan count 0, logical reads 0,... Table '2'. Scan count 1021, logical reads 9043,.... Table '3'. Scan count 209, logical reads 105754, .... Table '4'. Scan count 0, logical reads 0, .... Table '5'. Scan count 1, logical reads 695, ... **Table '#46DA8CA9'. Scan count 205, logical reads 205, ...** Table '6'. Scan count 6, logical reads 436, ... Table '7'. Scan count 1, logical reads 12,.... SQL Server Execution Times: CPU time = 17581 ms, elapsed time = 17595 ms. Notice the weird temp table and extra tables involved in the slow query. It seems clear that having a second file group is making SQL Server batty with choosing an execution plan. What the heck is going on?

Read the article

DRBD not syncing between my nodes when IP is reset

- by ramdaz

I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

Read the article

ASA 5505 stops local internet when connected to VPN

- by g18c

Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

Read the article

Windows 7 inbuilt and 3rd party (de)fragmentation related queries

- by Karan

I have a pretty good idea of how files end up getting fragmented. That said, I just copied ~3,200 files of varying sizes (from a few KB to ~20GB) from an external USB HDD to an internal, freshly formatted (under Windows 7 x64), NTFS, 2TB, 5400RPM, WD, SATA, non-system (i.e. secondary) drive, filling it up 57%. Since it should have been very much possible for each file to have been stored in one contiguous block, I expected the drive to be fragmented not more than 1-2% at most after this rather lengthy exercise (unfortunately this older machine doesn't support USB 3.0). Windows 7's inbuilt defrag utility told me after a quick analysis that the drive was fragmented only 1% or so, which dovetailed neatly with my expectations. However, just out of curiosity I downloaded and ran the latest portable x64 version of Piriform's Defraggler, and was shocked to see the drive being reported as being ~85% fragmented! The portable version of Auslogics Disk Defrag also agreed with Defraggler, and both clearly expected to grind away for ~10 hours to completely defragment the drive. 1) How in blazes could the inbuilt and 3rd party defrag utils disagree so badly? I mean, 10-20% variance is probably understandable, but 1% and 85% are miles apart! This Engineering Windows 7 blog post states: In Windows XP, any file that is split into more than one piece is considered fragmented. Not so in Windows Vista if the fragments are large enough – the defragmentation algorithm was changed (from Windows XP) to ignore pieces of a file that are larger than 64MB. As a result, defrag in XP and defrag in Vista will report different amounts of fragmentation on a volume. ... [Please read the entire post so the quote is not taken out of context.] Could it simply be that the 3rd party defrag utils ignore this post-XP change and continue to use analysis algos similar to those XP used? 2) Assuming that the 3rd party utils aren't lying about the real extent of fragmentation (which Windows is downplaying post-XP), how could the files have even got fragmented so badly given they were just copied over afresh to an empty drive? 3) If vastly differing analysis algos explain the yawning gap, which do I believe? I'm no defrag fanatic for sure, but 85% is enough to make me seriously consider spending 10 hours defragging this drive. On the other hand, 1% reported by Windows' own defragger clearly implies that there is no cause for concern and defragging would actually have negative consequences (as per the post). Is Windows' assumption valid and should I just let it be, or will there be any noticeable performance gains after running one of the 3rd party utils for 10 hours straight? 4) I see that out of the box Windows 7 defrag is scheduled to run weekly. Does anyone know whether it defrags every single time, or only if its analysis reveals a fragmentation percentage over a set threshold? If the latter, what is this threshold and can it be changed, maybe via a Registry edit? Thanks for reading through (my first query on this wonderful site!) and for any helpful replies. Also, if you're answering question #3, please keep in mind that any speed increases post defragging with 3rd party utils vis-à-vis Windows' inbuilt program should not include pre-Vista (preferably pre-Win7) examples. Further, examples of programs that made your system boot faster won't help in this case, since this is a non-system drive (although one that'll still be used daily).

Read the article

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

- by mseika

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0–Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

Read the article

Tip/Trick: Fix Common SEO Problems Using the URL Rewrite Extension

- by ScottGu

Search engine optimization (SEO) is important for any publically facing web-site. A large % of traffic to sites now comes directly from search engines, and improving your site’s search relevancy will lead to more users visiting your site from search engine queries. This can directly or indirectly increase the money you make through your site. This blog post covers how you can use the free Microsoft URL Rewrite Extension to fix a bunch of common SEO problems that your site might have. It takes less than 15 minutes (and no code changes) to apply 4 simple URL Rewrite rules to your site, and in doing so cause search engines to drive more visitors and traffic to your site. The techniques below work equally well with both ASP.NET Web Forms and ASP.NET MVC based sites. They also works with all versions of ASP.NET (and even work with non-ASP.NET content). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Measuring the SEO of your website with the Microsoft SEO Toolkit A few months ago I blogged about the free SEO Toolkit that we’ve shipped. This useful tool enables you to automatically crawl/scan your site for SEO correctness, and it then flags any SEO issues it finds. I highly recommend downloading and using the tool against any public site you work on. It makes it easy to spot SEO issues you might have in your site, and pinpoint ways to optimize it further. Below is a simple example of a report I ran against one of my sites (www.scottgu.com) prior to applying the URL Rewrite rules I’ll cover later in this blog post: Search Relevancy and URL Splitting Two of the important things that search engines evaluate when assessing your site’s “search relevancy” are: How many other sites link to your content. Search engines assume that if a lot of people around the web are linking to your content, then it is likely useful and so weight it higher in relevancy. The uniqueness of the content it finds on your site. If search engines find that the content is duplicated in multiple places around the Internet (or on multiple URLs on your site) then it is likely to drop the relevancy of the content. One of the things you want to be very careful to avoid when building public facing sites is to not allow different URLs to retrieve the same content within your site. Doing so will hurt with both of the situations above. In particular, allowing external sites to link to the same content with multiple URLs will cause your link-count and page-ranking to be split up across those different URLs (and so give you a smaller page rank than what it would otherwise be if it was just one URL). Not allowing external sites to link to you in different ways sounds easy in theory – but you might wonder what exactly this means in practice and how you avoid it. 4 Really Common SEO Problems Your Sites Might Have Below are 4 really common scenarios that can cause your site to inadvertently expose multiple URLs for the same content. When this happens external sites linking to yours will end up splitting their page links across multiple URLs - and as a result cause you to have a lower page ranking with search engines than you deserve. SEO Problem #1: Default Document IIS (and other web servers) supports the concept of a “default document”. This allows you to avoid having to explicitly specify the page you want to serve at either the root of the web-site/application, or within a sub-directory. This is convenient – but means that by default this content is available via two different publically exposed URLs (which is bad). For example: http://scottgu.com/ http://scottgu.com/default.aspx SEO Problem #2: Different URL Casings Web developers often don’t realize URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx SEO Problem #3: Trailing Slashes Consider the below two URLs – they might look the same at first, but they are subtly different. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ SEO Problem #4: Canonical Host Names Sometimes sites support scenarios where they support a web-site with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://scottgu.com/albums.aspx/ http://www.scottgu.com/albums.aspx/ How to Easily Fix these SEO Problems in 10 minutes (or less) using IIS Rewrite If you haven’t been careful when coding your sites, chances are you are suffering from one (or more) of the above SEO problems. Addressing these issues will improve your search engine relevancy ranking and drive more traffic to your site. The “good news” is that fixing the above 4 issues is really easy using the URL Rewrite Extension. This is a completely free Microsoft extension available for IIS 7.x (on Windows Server 2008, Windows Server 2008 R2, Windows 7 and Windows Vista). The great thing about using the IIS Rewrite extension is that it allows you to fix the above problems *without* having to change any code within your applications. You can easily install the URL Rewrite Extension in under 3 minutes using the Microsoft Web Platform Installer (a free tool we ship that automates setting up web servers and development machines). Just click the green “Install Now” button on the URL Rewrite Spotlight page to install it on your Windows Server 2008, Windows 7 or Windows Vista machine: Once installed you’ll find that a new “URL Rewrite” icon is available within the IIS 7 Admin Tool: Double-clicking the icon will open up the URL Rewrite admin panel – which will display the list of URL Rewrite rules configured for a particular application or site: Notice that our rewrite rule list above is currently empty (which is the default when you first install the extension). We can click the “Add Rule…” link button in the top-right of the panel to add and enable new URL Rewriting logic for our site. Scenario 1: Handling Default Document Scenarios One of the SEO problems I discussed earlier in this post was the scenario where the “default document” feature of IIS causes you to inadvertently expose two URLs for the same content on your site. For example: http://scottgu.com/ http://scottgu.com/default.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the second URL to instead go to the first one. We will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. Let’s look at how we can create such a rule. We’ll begin by clicking the “Add Rule” link in the screenshot above. This will cause the below dialog to display: We’ll select the “Blank Rule” template within the “Inbound rules” section to create a new custom URL Rewriting rule. This will display an empty pane like below: Don’t worry – setting up the above rule is easy. The following 4 steps explain how to do so: Step 1: Name the Rule Our first step will be to name the rule we are creating. Naming it with a descriptive name will make it easier to find and understand later. Let’s name this rule our “Default Document URL Rewrite” rule: Step 2: Setup the Regular Expression that Matches this Rule Our second step will be to specify a regular expression filter that will cause this rule to execute when an incoming URL matches the regex pattern. Don’t worry if you aren’t good with regular expressions - I suck at them too. The trick is to know someone who is good at them or copy/paste them from a web-site. Below we are going to specify the following regular expression as our pattern rule: (.*?)/?Default\.aspx$ This pattern will match any URL string that ends with Default.aspx. The "(.*?)" matches any preceding character zero or more times. The "/?" part says to match the slash symbol zero or one times. The "$" symbol at the end will ensure that the pattern will only match strings that end with Default.aspx. Combining all these regex elements allows this rule to work not only for the root of your web site (e.g. http://scottgu.com/default.aspx) but also for any application or subdirectory within the site (e.g. http://scottgu.com/photos/default.aspx. Because the “ignore case” checkbox is selected it will match both “Default.aspx” as well as “default.aspx” within the URL. One nice feature built-into the rule editor is a “Test pattern” button that you can click to bring up a dialog that allows you to test out a few URLs with the rule you are configuring: Above I've added a “products/default.aspx” URL and clicked the “Test” button. This will give me immediate feedback on whether the rule will execute for it. Step 3: Setup a Permanent Redirect Action We’ll then setup an action to occur when our regular expression pattern matches the incoming URL: In the dialog above I’ve changed the “Action Type” drop down to be a “Redirect” action. The “Redirect Type” will be a HTTP 301 Permanent redirect – which means search engines will follow it. I’ve also set the “Redirect URL” property to be: {R:1}/ This indicates that we want to redirect the web client requesting the original URL to a new URL that has the originally requested URL path - minus the "Default.aspx" in it. For example, requests for http://scottgu.com/default.aspx will be redirected to http://scottgu.com/, and requests for http://scottgu.com/photos/default.aspx will be redirected to http://scottgu.com/photos/ The "{R:N}" regex construct, where N >= 0, is called a back-reference and N is the back-reference index. In the case of our pattern "(.*?)/?Default\.aspx$", if the input URL is "products/Default.aspx" then {R:0} will contain "products/Default.aspx" and {R:1} will contain "products". We are going to use this {R:1}/ value to be the URL we redirect users to. Step 4: Apply and Save the Rule Our final step is to click the “Apply” button in the top right hand of the IIS admin tool – which will cause the tool to persist the URL Rewrite rule into our application’s root web.config file (under a <system.webServer/rewrite> configuration section): <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Because IIS 7.x and ASP.NET share the same web.config files, you can actually just copy/paste the above code into your web.config files using Visual Studio and skip the need to run the admin tool entirely. This also makes adding/deploying URL Rewrite rules with your ASP.NET applications really easy. Step 5: Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/ http://scottgu.com/default.aspx Notice that the second URL automatically redirects to the first one. Because it is a permanent redirect, search engines will follow the URL and should update the page ranking of http://scottgu.com to include links to http://scottgu.com/default.aspx as well. Scenario 2: Different URL Casing Another common SEO problem I discussed earlier in this post is that URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL to instead go to the second (all lower-case) one. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: Unlike the previous scenario (where we created a “Blank Rule”), with this scenario we can take advantage of a built-in “Enforce lowercase URLs” rule template. When we click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that enforces the use of lowercase letters in URLs: When we click the “Yes” button we’ll get a pre-written rule that automatically performs a permanent redirect if an incoming URL has upper-case characters in it – and automatically send users to a lower-case version of the URL: We can click the “Apply” button to use this rule “as-is” and have it apply to all incoming URLs to our site. Because my www.scottgu.com site uses ASP.NET Web Forms, I’m going to make one small change to the rule we generated above – which is to add a condition that will ensure that URLs to ASP.NET’s built-in “WebResource.axd” handler are excluded from our case-sensitivity URL Rewrite logic. URLs to the WebResource.axd handler will only come from server-controls emitted from my pages – and will never be linked to from external sites. While my site will continue to function fine if we redirect these URLs to automatically be lower-case – doing so isn’t necessary and will add an extra HTTP redirect to many of my pages. The good news is that adding a condition that prevents my URL Rewriting rule from happening with certain URLs is easy. We simply need to expand the “Conditions” section of the form above We can then click the “Add” button to add a condition clause. This will bring up the “Add Condition” dialog: Above I’ve entered {URL} as the Condition input – and said that this rule should only execute if the URL does not match a regex pattern which contains the string “WebResource.axd”. This will ensure that WebResource.axd URLs to my site will be allowed to execute just fine without having the URL be re-written to be all lower-case. Note: If you have static resources (like references to .jpg, .css, and .js files) within your site that currently use upper-case characters you’ll probably want to add additional condition filter clauses so that URLs to them also don’t get redirected to be lower-case (just add rules for patterns like .jpg, .gif, .js, etc). Your site will continue to work fine if these URLs get redirected to be lower case (meaning the site won’t break) – but it will cause an extra HTTP redirect to happen on your site for URLs that don’t need to be redirected for SEO reasons. So setting up a condition clause makes sense to add. When I click the “ok” button above and apply our lower-case rewriting rule the admin tool will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has a capital “A”) automatically does a redirect to a lower-case version of the URL. Scenario 3: Trailing Slashes Another common SEO problem I discussed earlier in this post is the scenario of trailing slashes within URLs. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that does not have a trailing slash) to instead go to the second one that does. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Append or remove the trailing slash symbol” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that automatically redirects users to a URL with a trailing slash if one isn’t present: Like within our previous lower-casing rewrite rule we’ll add one additional condition clause that will exclude WebResource.axd URLs from being processed by this rule. This will avoid an unnecessary redirect for happening for those URLs. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL doesn’t have a trailing slash – and if the URL is not processed by either a directory or a file. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com http://scottgu.com/ Notice that the first URL (which has no trailing slash) automatically does a redirect to a URL with the trailing slash. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. Scenario 4: Canonical Host Names The final SEO problem I discussed earlier are scenarios where a site works with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that has a www prefix) to instead go to the second URL. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Canonical domain name” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a redirect rule that automatically redirects users to a primary host name URL: Above I’m entering the primary URL address I want to expose to the web: scottgu.com. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL has another leading domain name prefix. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Cannonical Hostname"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^scottgu\.com$" negate="true" /> </conditions> <action type="Redirect" url="http://scottgu.com/{R:1}" /> </rule> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has the “www” prefix) now automatically does a redirect to the second URL which does not have the www prefix. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. 4 Simple Rules for Improved SEO The above 4 rules are pretty easy to setup and should take less than 15 minutes to configure on existing sites you already have. The beauty of using a solution like the URL Rewrite Extension is that you can take advantage of it without having to change code within your web-site – and without having to break any existing links already pointing at your site. Users who follow existing links will be automatically redirected to the new URLs you wish to publish. And search engines will start to give your site a higher search relevancy ranking – which will list your site higher in search results and drive more traffic to it. Customizing your URL Rewriting rules further is easy to-do either by editing the web.config file directly, or alternatively, just double click the URL Rewrite icon within the IIS 7.x admin tool and it will list all the active rules for your web-site or application: Clicking any of the rules above will open the rules editor back up and allow you to tweak/customize/save them further. Summary Measuring and improving SEO is something every developer building a public-facing web-site needs to think about and focus on. If you haven’t already, download and use the SEO Toolkit to analyze the SEO of your sites today. New URL Routing features in ASP.NET MVC and ASP.NET Web Forms 4 make it much easier to build applications that have more control over the URLs that are published. Tools like the URL Rewrite Extension that I’ve talked about in this blog post make it much easier to improve the URLs that are published from sites you already have built today – without requiring you to change a lot of code. The URL Rewrite Extension provides a bunch of additional great capabilities – far beyond just SEO - as well. I’ll be covering these additional capabilities more in future blog posts. Hope this helps, Scott

Read the article

Cloud MBaaS : The Next Big Thing in Enterprise Mobility

- by shiju

In this blog post, I will take a look at Cloud Mobile Backend as a Service (MBaaS) and how we can leverage Cloud based Mobile Backend as a Service for building enterprise mobile apps. Today, mobile apps are incredibly significant in both consumer and enterprise space and the demand for the mobile apps is unbelievably increasing in day to day business. An enterprise can’t survive in business without a proper mobility strategy. A better mobility strategy and faster delivery of your mobile apps will give you an extra mileage for your business and IT strategy. So organizations and mobile developers are looking for different strategy for meeting this demand and adopting different development strategy for their mobile apps. Some developers are adopting hybrid mobile app development platforms, for delivering their products for multiple platforms, for fast time-to-market. Others are adopting a Mobile enterprise application platform (MEAP) such as Kony for their enterprise mobile apps for fast time-to-market and better business integration. The Challenges of Enterprise Mobility The real challenge of enterprise mobile apps, is not about creating the front-end environment or developing front-end for multiple platforms. The most important thing of enterprise mobile apps is to expose your enterprise data to mobile devices where the real pain is your business data might be residing in lot of different systems including legacy systems, ERP systems etc., and these systems will be deployed with lot of security restrictions. Exposing your data from the on-premises servers, is not a easy thing for most of the business organizations. Many organizations are spending too much time for their front-end development strategy, but they are really lacking for building a strategy on their back-end for exposing the business data to mobile apps. So building a REST services layer and mobile back-end services, on the top of legacy systems and existing middleware systems, is the key part of most of the enterprise mobile apps, where multiple mobile platforms can easily consume these REST services and other mobile back-end services for building mobile apps. For some mobile apps, we can’t predict its user base, especially for products where customers can gradually increase at any time. And for today’s mobile apps, faster time-to-market is very critical so that spending too much time for mobile app’s scalability, will not be worth. The real power of Cloud is the agility and on-demand scalability, where we can scale-up and scale-down our applications very easily. It would be great if we could use the power of Cloud to mobile apps. So using Cloud for mobile apps is a natural fit, where we can use Cloud as the storage for mobile apps and hosting mechanism for mobile back-end services, where we can enjoy the full power of Cloud with greater level of on-demand scalability and operational agility. So Cloud based Mobile Backend as a Service is great choice for building enterprise mobile apps, where enterprises can enjoy the massive scalability power of their mobile apps, provided by public cloud vendors such as Microsoft Windows Azure. Mobile Backend as a Service (MBaaS) We have discussed the key challenges of enterprise mobile apps and how we can leverage Cloud for hosting mobile backend services. MBaaS is a set of cloud-based, server-side mobile services for multiple mobile platforms and HTML5 platform, which can be used as a backend for your mobile apps with the scalability power of Cloud. The information below provides the key features of a typical MBaaS platform: Cloud based storage for your application data. Automatic REST API services on the application data, for CRUD operations. Native push notification services with massive scalability power. User management services for authenticate users. User authentication via Social accounts such as Facebook, Google, Microsoft, and Twitter. Scheduler services for periodically sending data to mobile devices. Native SDKs for multiple mobile platforms such as Windows Phone and Windows Store, Android, Apple iOS, and HTML5, for easily accessing the mobile services from mobile apps, with better security. Typically, a MBaaS platform will provide native SDKs for multiple mobile platforms so that we can easily consume the server-side mobile services. MBaaS based REST APIs can use for integrating to enterprise backend systems. We can use the same mobile services for multiple platform so hat we can reuse the application logic to multiple mobile platforms. Public cloud vendors are building the mobile services on the top of their PaaS offerings. Windows Azure Mobile Services is a great platform for a MBaaS offering that is leveraging Windows Azure Cloud platform’s PaaS capabilities. Hybrid mobile development platform Titanium provides their own MBaaS services. LoopBack is a new MBaaS service provided by Node.js consulting firm StrongLoop, which can be hosted on multiple cloud platforms and also for on-premises servers. The Challenges of MBaaS Solutions If you are building your mobile apps with a new data storage, it will be very easy, since there is not any integration challenges you have to face. But most of the use cases, you have to extract your application data in which stored in on-premises servers which might be under VPNs and firewalls. So exposing these data to your MBaaS solution with a proper security would be a big challenge. The capability of your MBaaS vendor is very important as you have to interact with your legacy systems for many enterprise mobile apps. So you should be very careful about choosing for MBaaS vendor. At the same time, you should have a proper strategy for mobilizing your application data which stored in on-premises legacy systems, where your solution architecture and strategy is more important than platforms and tools. Windows Azure Mobile Services Windows Azure Mobile Services is an MBaaS offerings from Windows Azure cloud platform. IMHO, Microsoft Windows Azure is the best PaaS platform in the Cloud space. Windows Azure Mobile Services extends the PaaS capabilities of Windows Azure, to mobile devices, which can be used as a cloud backend for your mobile apps, which will provide global availability and reach for your mobile apps. Windows Azure Mobile Services provides storage services, user management with social network integration, push notification services and scheduler services and provides native SDKs for all major mobile platforms and HTML5. In Windows Azure Mobile Services, you can write server-side scripts in Node.js where you can enjoy the full power of Node.js including the use of NPM modules for your server-side scripts. In the previous section, we had discussed some challenges of MBaaS solutions. You can leverage Windows Azure Cloud platform for solving many challenges regarding with enterprise mobility. The entire Windows Azure platform can play a key role for working as the backend for your mobile apps where you can leverage the entire Windows Azure platform for your mobile apps. With Windows Azure, you can easily connect to your on-premises systems which is a key thing for mobile backend solutions. Another key point is that Windows Azure provides better integration with services like Active Directory, which makes Windows Azure as the de facto platform for enterprise mobility, for enterprises, who have been leveraging Microsoft ecosystem for their application and IT infrastructure. Windows Azure Mobile Services is going to next evolution where you can expect some exciting features in near future. One area, where Windows Azure Mobile Services should definitely need an improvement, is about the default storage mechanism in which currently it is depends on SQL Server. IMHO, developers should be able to choose multiple default storage option when creating a new mobile service instance. Let’s say, there should be a different storage providers such as SQL Server storage provider and Table storage provider where developers should be able to choose their choice of storage provider when creating a new mobile services project. I have been used Windows Azure and Windows Azure Mobile Services as the backend for production apps for mobile, where it performed very well. MBaaS Over MEAP Recently, many larger enterprises has been adopted Mobile enterprise application platform (MEAP) for their mobile apps. I haven’t worked on any production MEAP solution, but I heard that developers are really struggling with MEAP in different way. The learning curve for a proprietary MEAP platform is very high. I am completely against for using larger proprietary ecosystem for mobile apps. For enterprise mobile apps, I highly recommend to use native iOS/Android/Windows Phone or HTML5 for front-end with a cloud hosted MBaaS solution as the middleware. A MBaaS service can be consumed from multiple mobile apps where REST APIs are using to integrating with enterprise backend systems. Enterprise mobility should start with exposing REST APIs on the enterprise backend systems and these REST APIs can host on Cloud where we can enjoy the power of Cloud for our services. If you are having REST APIs for your enterprise data, then you can easily build mobile frontends for multiple platforms. You can follow me on Twitter @shijucv

Read the article

OFM 11g: OAM SSO for Forms and ADF Faces

- by olaf.heimburger

In my blog entry OFM 11g: Implementing OAM SSO with Forms we set the foundation for providing a complete Single Sign-On solution based on Oracle Access Manager (OAM). This foundation should now be used to combine Forms 11g and ADF Faces 11g applications with a transparent login. The Beginning Before we start, lets re-consider the requirements to achieve the ultimate goal. These are:- Access to the Forms 11g Application must be authenticated by OAM (protected). Access to the ADF Faces 11g Application must be authenticated by OAM (protected). Switching from one application to the other should not result in a re-authentication (aka single sign-on). User identity should be availble to the application without any extra work in the application code. All these are the common requirements for a single sign-on solution. The challenge here is that Forms relies on Oracle AS SSO (OSSO or "the old SSO") while ADF Faces is quite open and can be protected by Oracle AS SSO and Oracle Access Manager SSO (OAM SSO or "the modern SSO"). Both application types can use their own login mechanism. The Forms 11g Application To demonstrate the SSO functionality, we use the standard Forms test (/forms/frmservlet?form=test.fmx). Although this shows nothing specific in the Forms application, it is good enough to demonstrate that it is protected. The ADF Faces 11g Application With ADF 11g you can develop quite a number of useful Faces based applications. Among many features, it comes with the ADF Security feature that provides you with functionality to protect your pages, regions, and even TaskFlows from un-authenticated usage in a declarative way.To demonstrate that functionality a sample application with different access levels plus a login dialog is used. This application comes with a publc page that has protected content (a button). Once you are authenticated for the application, the protected content and some personalisation (the users name) is shown. Protecting Forms 11g As already explained in the OFM 11g: Implementing OAM SSO with Forms, the easiest way to protect a Forms application is to configure it as a OSSO partner application, setup mod_osso, test it, migrate OSSO to OAM SSO with the Upgrade Agent, reconfigure mod_osso, and you are done.Sort of. By default the OAM is configured to run in co-exist mode. This means that a user has to re-authenticate to the Forms application when logged into an OAM SSO application before. To avoid this, you must disable the co-exist mode, for example by using WLST and issue the disableCoexistMode on the OAM server. Protecting ADF Faces 11g To protect an ADF Faces 11g application we have to consider two scenarios: Use a HTTPD server in front of WLS Use WLS without a HTTPD server Both scenarios have their pro's and cons' and we won't get into details and just describe how to configure both. Scenario 1: HTTPD Server with WLS In this scenario we have to setup the environment in some steps:- Configure a WebGate at OAMThis configuration can be done through the OAM console or by a script. No matter which way you choose, the WebGate configuration files will be created for you. Install the OAM WebGate into an HTTPD serverThe type of webgate you need to install depends on you HTTPD server. With Oracle HTTP Server 11g you can use the latest OAM 11g WebGate. With other HTTPD servers you must resort to OAM 10g WebGates. A OAM 11g WebGate can use the pre-created configuration files supplied during the WebGate configuration at OAM. An OAM 10g WebGate asks for the specific configuration and verifies it during installation. Configure the WLS plugin to forward the requests to WLSAgain, depending on your HTTPD Server you have different plugins to forward requests to WLS. With OHS 11g you can use the pre-installed mod_wl_ohs plugin. Its configuration is quite simple and straightforward. Configure an OAM SSPI Provider as a IdentityAsserter in WLS to retrieve the user identifierThis configuration is quite important as it retrieves the user identifier for the next step. If you have a SOA Suite installation within your OFM_HOME, the necessary software is already installed and you only need to setup your Security Realm within WLS.You can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. We add the OAMIdentityAsserter as the first SSPI Provider. It is important that the Control Flag is set to SUFFICIENT. Every other configuration can be left as is, no changes are necessary here. Configure an OAM Identity Provider to get the real user identityIn OFM 11g: Implementing OAM SSO with Forms we have configured an OID as Identity Store. To get the user identity we need to configure the same OID as an SSPI Provider for WLS. This will retrieve the real user information from OID and creates the JAAS Subject and Principals to be used by any application within WLS.Again, you can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. Now add the OIDAuthenticator as the second SSPI Provider. It is important that the Control Flag is set to OPTIONAL. After we saved this setup, we need to configure this provider by setting the Provider Specific details to access OID. Scenario 2: WLS only This scenario is a bit easier but requires more work in the WLS setup:- Configure a WebGate at OAMThis configuration can be done through the OAM console or by a script. No matter which way you choose, the WebGate configuration files will be created for you. Configure the OAM SSPI Provider as IdentityAuthenticator to authenticate and set the user identifierWhen using the OAM SSPI Provider as OAMAuthenticator we create it with the Control Flag as SUFFICIENT. Afte saving it, the Provider Specific settings must be configured to allow the OAM SSPI Provider to connect to the OAM Server. Configure an OAM Identity Provider to get the real user identity providerAgain, you can do this by pointing your browser to the WLS Console, log in as administrator, select the Security Realm (usually myrealm), and select Providers. Now add the OIDAuthenticator as the second SSPI Provider. It is important that the Control Flag is set to OPTIONAL. After we saved this setup, we need to configure this provider by setting the Provider Specific details to access OID. Configure ADF 11g Application for OAM Actually, there are no changes to be made within the ADF application. We only need to add the value CLIENT_CERT to the <auth-mode> tag in the <login-config> tag in the web.xml file. Testing To test the configuration, simply point your browser to one of both appliction URLs. OAM should kick in and redirect you to the OAM Login page. After you have entered the correct credentials, access to the URLs is granted and you will see the application. Enjoy!

Read the article

C# in Depth, Third Edition by Jon Skeet, Manning Publications Co. Book Review

- by Compudicted

Originally posted on: http://geekswithblogs.net/Compudicted/archive/2013/10/24/c-in-depth-third-edition-by-jon-skeet-manning-publications.aspx I started reading this ebook on September 28, 2013, the same day it was sent my way by Manning Publications Co. for review while it still being fresh off the press. So 1st thing – thanks to Manning for this opportunity and a free copy of this must have on every C# developer’s desk book! Several hours ago I finished reading this book (well, except a for a large portion of its quite lengthy appendix). I jumped writing this review right away while still being full of emotions and impressions from reading it thoroughly and running code examples. Before I go any further I would like say that I used to program on various platforms using various languages starting with the Mainframe and ending on Windows, and I gradually shifted toward dealing with databases more than anything, however it happened with me to program in C# 1 a lot when it was first released and then some C# 2 with a big leap in between to C# 5. So my perception and experience reading this book may differ from yours. Also what I want to tell is somewhat funny that back then, knowing some Java and seeing C# 1 released, initially made me drawing a parallel that it is a copycat language, how wrong was I… Interestingly, Jon programs in Java full time, but how little it was mentioned in the book! So more on the book: Be informed, this is not a typical “Recipes”, “Cookbook” or any set of ready solutions, it is rather targeting mature, advanced developers who do not only know how to use a number of features, but are willing to understand how the language is operating “under the hood”. I must state immediately, at the same time I am glad the author did not go into the murky depths of the MSIL, so this is a very welcome decision on covering a modern language as C# for me, thank you Jon! Frankly, not all was that rosy regarding the tone and structure of the book, especially the the first half or so filled me with several negative and positive emotions overpowering each other. To expand more on that, some statements in the book appeared to be bias to me, or filled with pre-justice, it started to look like it had some PR-sole in it, but thankfully this was all gone toward the end of the 1st third of the book. Specifically, the mention on the C# language popularity, Java is the #1 language as per https://sites.google.com/site/pydatalog/pypl/PyPL-PopularitY-of-Programming-Language (many other sources put C at the top which I highly doubt), also many interesting functional languages as Clojure and Groovy appeared and gained huge traction which run on top of Java/JVM whereas C# does not enjoy such a situation. If we want to discuss the popularity in general and say how fast a developer can find a new job that pays well it would be indeed the very Java, C++ or PHP, never C#. Or that phrase on language preference as a personal issue? We choose where to work or we are chosen because of a technology used at a given software shop, not vice versa. The book though it technically very accurate with valid code, concise examples, but I wish the author would give more concrete, real-life examples on where each feature should be used, not how. Another point to realize before you get the book is that it is almost a live book which started to be written when even C# 3 wasn’t around so a lot of ground is covered (nearly half of the book) on the pre-C# 3 feature releases so if you already have a solid background in the previous releases and do not plan to upgrade, perhaps half of the book can be skipped, otherwise this book is surely highly recommended. Alas, for me it was a hard read, most of it. It was not boring (well, only may be two times), it was just hard to grasp some concepts, but do not get me wrong, it did made me pause, on several occasions, and made me read and re-read a page or two. At times I even wondered if I have any IQ at all (LOL). Be prepared to read A LOT on generics, not that they are widely used in the field (I happen to work as a consultant and went thru a lot of code at many places) I can tell my impression is the developers today in best case program using examples found at OpenStack.com. Also unlike the Java world where having the most recent version is nearly mandated by the OSS most companies on the Microsoft platform almost never tempted to upgrade the .Net version very soon and very often. As a side note, I was glad to see code recently that included a nullable variable (myvariable? notation) and this made me smile, besides, I recommended that person this book to expand her knowledge. The good things about this book is that Jon maintains an active forum, prepared code snippets and even a small program (Snippy) that is happy to run the sample code saving you from writing any plumbing code. A tad now on the C# language itself – it sure enjoyed a wonderful road toward perfection and a very high adoption, especially for ASP development. But to me all the recent features that made this statically typed language more dynamic look strange. Don’t we have F#? Which supposed to be the dynamic language? Why do we need to have a hybrid language? Now the developers live their lives in dualism of the static and dynamic variables! And LINQ to SQL, it is covered in depth, but wasn’t it supposed to be dropped? Also it seems that very little is being added, and at a slower pace, e.g. Roslyn will come in late 2014 perhaps, and will be probably the only main feature. Again, it is quite hard to read this book as various chapters, C# versions mentioned every so often only if I only could remember what was covered exactly where! So the fact it has so many jumps/links back and forth I recommend the ebook format to make the navigations easier to perform and I do recommend using software that allows bookmarking, also make sure you have access to plenty of coffee and pizza (hey, you probably know this joke – who a programmer is) ! In terms of closing, if you stuck at C# 1 or 2 level, it is time to embrace the power of C# 5! Finally, to compliment Manning, this book unlike from any other publisher so far, was the only one as well readable (put it formatted) on my tablet as in Adobe Reader on a laptop.

Read the article

LLBLGen Pro v3.1 released!

- by FransBouma

Yesterday we released LLBLGen Pro v3.1! Version 3.1 comes with new features and enhancements, which I'll describe briefly below. v3.1 is a free upgrade for v3.x licensees. What's new / changed? Designer Extensible Import system. An extensible import system has been added to the designer to import project data from external sources. Importers are plug-ins which import project meta-data (like entity definitions, mappings and relational model data) from an external source into the loaded project. In v3.1, an importer plug-in for importing project elements from existing LLBLGen Pro v3.x project files has been included. You can use this importer to create source projects from which you import parts of models to build your actual project with. Model-only relationships. In v3.1, relationships of the type 1:1, m:1 and 1:n can be marked as model-only. A model-only relationship isn't required to have a backing foreign key constraint in the relational model data. They're ideal for projects which have to work with relational databases where changes can't always be made or some relationships can't be added to (e.g. the ones which are important for the entity model, but are not allowed to be added to the relational model for some reason). Custom field ordering. Although fields in an entity definition don't really have an ordering, it can be important for some situations to have the entity fields in a given order, e.g. when you use compound primary keys. Field ordering can be defined using a pop-up dialog which can be opened through various ways, e.g. inside the project explorer, model view and entity editor. It can also be set automatically during refreshes based on new settings. Command line relational model data refresher tool, CliRefresher.exe. The command line refresh tool shipped with v2.6 is now available for v3.1 as well Navigation enhancements in various designer elements. It's now easier to find elements like entities, typed views etc. in the project explorer from editors, to navigate to related entities in the project explorer by right clicking a relationship, navigate to the super-type in the project explorer when right-clicking an entity and navigate to the sub-type in the project explorer when right-clicking a sub-type node in the project explorer. Minor visual enhancements / tweaks LLBLGen Pro Runtime Framework Entity creation is now up to 30% faster and takes 5% less memory. Creating an entity object has been optimized further by tweaks inside the framework to make instantiating an entity object up to 30% faster. It now also takes up to 5% less memory than in v3.0 Prefetch Path node merging is now up to 20-25% faster. Setting entity references required the creation of a new relationship object. As this relationship object is always used internally it could be cached (as it's used for syncing only). This increases performance by 20-25% in the merging functionality. Entity fetches are now up to 20% faster. A large number of tweaks have been applied to make entity fetches up to 20% faster than in v3.0. Full WCF RIA support. It's now possible to use your LLBLGen Pro runtime framework powered domain layer in a WCF RIA application using the VS.NET tools for WCF RIA services. WCF RIA services is a Microsoft technology for .NET 4 and typically used within silverlight applications. SQL Server DQE compatibility level is now per instance. (Usable in Adapter). It's now possible to set the compatibility level of the SQL Server Dynamic Query Engine (DQE) per instance of the DQE instead of the global setting it was before. The global setting is still available and is used as the default value for the compatibility level per-instance. You can use this to switch between CE Desktop and normal SQL Server compatibility per DataAccessAdapter instance. Support for COUNT_BIG aggregate function (SQL Server specific). The aggregate function COUNT_BIG has been added to the list of available aggregate functions to be used in the framework. Minor changes / tweaks I'm especially pleased with the import system, as that makes working with entity models a lot easier. The import system lets you import from another LLBLGen Pro v3 project any entity definition, mapping and / or meta-data like table definitions. This way you can build repository projects where you store model fragments, e.g. the building blocks for a customer-order system, a user credential model etc., any model you can think of. In most projects, you'll recognize that some parts of your new model look familiar. In these cases it would have been easier if you would have been able to import these parts from projects you had pre-created. With LLBLGen Pro v3.1 you can. For example, say you have an Oracle schema called CRM which contains the bread 'n' butter customer-order-product kind of model. You create an entity model from that schema and save it in a project file. Now you start working on another project for another customer and you have to use SQL Server. You also start using model-first development, so develop the entity model from scratch as there's no existing database. As this customer also requires some CRM like entity model, you import the entities from your saved Oracle project into this new SQL Server targeting project. Because you don't work with Oracle this time, you don't import the relational meta-data, just the entities, their relationships and possibly their inheritance hierarchies, if any. As they're now entities in your project you can change them a bit to match the new customer's requirements. This can save you a lot of time, because you can re-use pre-fab model fragments for new projects. In the example above there are no tables yet (as you work model first) so using the forward mapping capabilities of LLBLGen Pro v3 creates the tables, PK constraints, Unique Constraints and FK constraints for you. This way you can build a nice repository of model fragments which you can re-use in new projects.

Read the article

SQL SERVER – 5 Tips for Improving Your Data with expressor Studio

- by pinaldave

It’s no secret that bad data leads to bad decisions and poor results. However, how do you prevent dirty data from taking up residency in your data store? Some might argue that it’s the responsibility of the person sending you the data. While that may be true, in practice that will rarely hold up. It doesn’t matter how many times you ask, you will get the data however they decide to provide it. So now you have bad data. What constitutes bad data? There are quite a few valid answers, for example: Invalid date values Inappropriate characters Wrong data Values that exceed a pre-set threshold While it is certainly possible to write your own scripts and custom SQL to identify and deal with these data anomalies, that effort often takes too long and becomes difficult to maintain. Instead, leveraging an ETL tool like expressor Studio makes the data cleansing process much easier and faster. Below are some tips for leveraging expressor to get your data into tip-top shape. Tip 1: Build reusable data objects with embedded cleansing rules One of the new features in expressor Studio 3.2 is the ability to define constraints at the metadata level. Using expressor’s concept of Semantic Types, you can define reusable data objects that have embedded logic such as constraints for dealing with dirty data. Once defined, they can be saved as a shared atomic type and then re-applied to other data attributes in other schemas. As you can see in the figure above, I’ve defined a constraint on zip code. I can then save the constraint rules I defined for zip code as a shared atomic type called zip_type for example. The next time I get a different data source with a schema that also contains a zip code field, I can simply apply the shared atomic type (shown below) and the previously defined constraints will be automatically applied. Tip 2: Unlock the power of regular expressions in Semantic Types Another powerful feature introduced in expressor Studio 3.2 is the option to use regular expressions as a constraint. A regular expression is used to identify patterns within data. The patterns could be something as simple as a date format or something much more complex such as a street address. For example, I could define that a valid IP address should be made up of 4 numbers, each 0 to 255, and separated by a period. So 192.168.23.123 might be a valid IP address whereas 888.777.0.123 would not be. How can I account for this using regular expressions? A very simple regular expression that would look for any 4 sets of 3 digits separated by a period would be: ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ Alternatively, the following would be the exact check for truly valid IP addresses as we had defined above: ^(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])$ . In expressor, we would enter this regular expression as a constraint like this: Here we select the corrective action to be ‘Escalate’, meaning that the expressor Dataflow operator will decide what to do. Some of the options include rejecting the offending record, skipping it, or aborting the dataflow. Tip 3: Email pattern expressions that might come in handy In the example schema that I am using, there’s a field for email. Email addresses are often entered incorrectly because people are trying to avoid spam. While there are a lot of different ways to define what constitutes a valid email address, a quick search online yields a couple of really useful regular expressions for validating email addresses: This one is short and sweet: \b[A-Z0-9._%+-]+@[A-Z0-9.-]+\.[A-Z]{2,4}\b (Source: http://www.regular-expressions.info/) This one is more specific about which characters are allowed: ^([a-zA-Z0-9_\-\.]+)@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9\-]+\.)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?)$ (Source: http://regexlib.com/REDetails.aspx?regexp_id=26 ) Tip 4: Reject “dirty data” for analysis or further processing Yet another feature introduced in expressor Studio 3.2 is the ability to reject records based on constraint violations. To capture reject records on input, simply specify Reject Record in the Error Handling setting for the Read File operator. Then attach a Write File operator to the reject port of the Read File operator as such: Next, in the Write File operator, you can configure the expressor operator in a similar way to the Read File. The key difference would be that the schema needs to be derived from the upstream operator as shown below: Once configured, expressor will output rejected records to the file you specified. In addition to the rejected records, expressor also captures some diagnostic information that will be helpful towards identifying why the record was rejected. This makes diagnosing errors much easier! Tip 5: Use a Filter or Transform after the initial cleansing to finish the job Sometimes you may want to predicate the data cleansing on a more complex set of conditions. For example, I may only be interested in processing data containing males over the age of 25 in certain zip codes. Using an expressor Filter operator, you can define the conditional logic which isolates the records of importance away from the others. Alternatively, the expressor Transform operator can be used to alter the input value via a user defined algorithm or transformation. It also supports the use of conditional logic and data can be rejected based on constraint violations. However, the best tip I can leave you with is to not constrain your solution design approach – expressor operators can be combined in many different ways to achieve the desired results. For example, in the expressor Dataflow below, I can post-process the reject data from the Filter which did not meet my pre-defined criteria and, if successful, Funnel it back into the flow so that it gets written to the target table. I continue to be impressed that expressor offers all this functionality as part of their FREE expressor Studio desktop ETL tool, which you can download from here. Their Studio ETL tool is absolutely free and they are very open about saying that if you want to deploy their software on a dedicated Windows Server, you need to purchase their server software, whose pricing is posted on their website. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Migrating SQL Server Databases – The DBA’s Checklist (Part 1)

- by Sadequl Hussain

It is a fact of life: SQL Server databases change homes. They move from one instance to another, from one version to the next, from old servers to new ones. They move around as an organisation’s data grows, applications are enhanced or new versions of the database software are released. If not anything else, servers become old and unreliable and databases eventually need to find a new home. Consider the following scenarios: 1. A new database application is rolled out in a production server from the development or test environment 2. A copy of the production database needs to be installed in a test server for troubleshooting purposes 3. A copy of the development database is regularly refreshed in a test server during the system development life cycle 4. A SQL Server is upgraded to a newer version. This can be an in-place upgrade or a side-by-side migration 5. One or more databases need to be moved between different instances as part of a consolidation strategy. The instances can be running the same or different version of SQL Server 6. A database has to be restored from a backup file provided by a third party application vendor 7. A backup of the database is restored in the same or different instance for disaster recovery 8. A database needs to be migrated within the same instance: a. Files are moved from direct attached storage to storage area network b. The same database is copied under a different name for another application Migrating SQL Server database applications is a complex topic in itself. There are a number of components that can be involved: jobs, DTS or SSIS packages, logins or linked servers are only few pieces of the puzzle. However, in this article we will focus only on the central part of migration: the installation of the database itself. Unless it is an in-place upgrade, typically the database is taken from a source server and installed in a destination instance. Most of the time, a full backup file is used for the rollout. The backup file is either provided to the DBA or the DBA takes the backup and restores it in the target server. Sometimes the database is detached from the source and the files are copied to and attached in the destination. Regardless of the method of copying, moving, refreshing, restoring or upgrading the physical database, there are a number of steps the DBA should follow before and after it has been installed in the destination. It is these post database installation steps we are going to discuss below. Some of these steps apply in almost every scenario described above while some will depend on the type of objects contained within the database. Also, the principles hold regardless of the number of databases involved. Step 1: Make a copy of data and log files when attaching and detaching When detaching and attaching databases, ensure you have made copies of the data and log files if the destination is running a newer version of SQL Server. This is because once attached to a newer version, the database cannot be detached and attached back to an older version. Trying to do so will give you a message like the following: Server: Msg 602, Level 21, State 50, Line 1 Could not find row in sysindexes for database ID 6, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. Connection Broken If you try to backup the attached database and restore it in the source, it will still fail. Similarly, if you are restoring the database in a newer version, it cannot be backed up or detached and put back in an older version of SQL. Unlike detach and attach method though, you do not lose the backup file or the original database here. When detaching and attaching a database, it is important you keep all the log files available along with the data files. It is possible to attach a database without a log file and SQL Server can be instructed to create a new log file, however this does not work if the database was detached when the primary file group was read-only. You will need all the log files in such cases. Step 2: Change database compatibility level Once the database has been restored or attached to a newer version of SQL Server, change the database compatibility level to reflect the newer version unless there is a compelling reason not to do so. When attaching or restoring from a previous version of SQL, the database retains the older version’s compatibility level. The only time you would want to keep a database with an older compatibility level is when the code within your database is no longer supported by SQL Server. For example, outer joins with *= or the =* operators were still possible in SQL 2000 (with a warning message), but not in SQL 2005 anymore. If your stored procedures or triggers are using this form of join, you would want to keep the database with an older compatibility level. For a list of compatibility issues between older and newer versions of SQL Server databases, refer to the Books Online under the sp_dbcmptlevel topic. Application developers and architects can help you in deciding whether you should change the compatibility level or not. You can always change the compatibility mode from the newest to an older version if necessary. To change the compatibility level, you can either use the database’s property from the SQL Server Management Studio or use the sp_dbcmptlevel stored procedure. Bear in mind that you cannot run the built-in reports for databases from SQL Server Management Studio if you keep the database with an older compatibility level. The following figure shows the error message I received when trying to run the “Disk Usage by Top Tables” report against a database. This database was hosted in a SQL Server 2005 system and still had a compatibility mode 80 (SQL 2000). Continues…

Read the article

Now Available – Windows Azure SDK 1.6

- by Shaun

Microsoft has just announced the Windows Azure SDK 1.6 and the Windows Azure Tools for Visual Studio 1.6. Now people can download the latest product through the WebPI. After you downloaded and installed the SDK you will find that The SDK 1.6 can be stayed side by side with the SDK 1.5, which means you can still using the 1.5 assemblies. But the Visual Studio Tools would be upgraded to 1.6. Different from the previous SDK, in this version it includes 4 components: Windows Azure Authoring Tools, Windows Azure Emulators, Windows Azure Libraries for .NET 1.6 and the Windows Azure Tools for Microsoft Visual Studio 2010. There are some significant upgrades in this version, which are Publishing Enhancement: More easily connect to the Windows Azure when publish your application by retrieving a publish setting file. It will let you configure some settings of the deployment, without getting back to the developer portal. Multi-profiles: The publish settings, cloud configuration files, etc. will be stored in one or more MSBuild files. It will be much easier to switch the settings between vary build environments. MSBuild Command-line Build Support. In-Place Upgrade Support. Publishing Enhancement So let’s have a look about the new features of the publishing. Just create a new Windows Azure project in Visual Studio 2010 with a MVC 3 Web Role, and right-click the Windows Azure project node in the solution explorer, then select Publish, we will find the new publish dialog. In this version the first thing we need to do is to connect to our Windows Azure subscription. Click the “Sign in to download credentials” link, we will be navigated to the login page to provide the Live ID. The Windows Azure Tool will generate a certificate file and uploaded to the subscriptions those belong to us. Then we will download a PUBLISHSETTINGS file, which contains the credentials and subscriptions information. The Visual Studio Tool will generate a certificate and deployed to the subscriptions you have as the Management Certificate. The VS Tool will use this certificate to connect to the subscription in the next step. In the next step, I would back to the Visual Studio (the publish dialog should be stilling opened) and click the Import button, select the PUBLISHSETTINGS file I had just downloaded. Then all my subscriptions will be shown in the dropdown list. Select a subscription that I want the application to be published and press the Next button, then we can select the hosted service, environment, build configuration and service configuration shown in the dialog. In this version we can create a new hosted service directly here rather than go back to the developer portal. Just select the <Create New …> item in the hosted service. What we need to do is to provide the hosted service name and the location. Once clicked the OK, after several seconds the hosted service will be established. If we went to the developer portal we will find the new hosted service in my subscription. a) Currently we cannot select the Affinity Group when create a new hosted service through the Visual Studio Publish dialog. b) Although we can specify the hosted service name and DNS prefixing through the developer portal, we cannot do so from the VS Tool, which means the DNS prefixing would be the same as what we specified for the hosted service name. For example, we specified our hosted service name as “Sdk16Demo”, so the public URL would be http://sdk16demo.cloudapp.net/. After created a new hosted service we can select the cloud environment (production or staging), the build configuration (release or debug), and the service configuration (cloud or local). And we can set the Remote Desktop by check the related checkbox as well. One thing should be note is that, in this version when we set the Remote Desktop settings we don’t need to specify a certificate by default. This is because the Visual Studio will generate a new certificate for us by default. But we can still specify an existing certificate for RDC, by clicking the “More Options” button. Visual Studio Tool will create another certificate for the Remote Desktop connection. It will NOT use the certificate that managing the subscription. We also can select the “Advanced Settings” page to specify the deployment label, storage account, IntelliTrace and .NET profiling information, etc.. Press Next button, the dialog will display all settings I had just specified and it will save them as a new profile. The last step is to click the Publish button. Since we enabled the Remote Desktop feature, the first step of publishing was uploading the certificate. And then it will verify the storage account we specified and upload the package, then finally created the website in Windows Azure. Multi-Profiles After published, if we back to the Visual Studio we can find a AZUREPUBXML file under the Profiles folder in the Azure project. It includes all settings we specified before. If we publish this project again, we can just use the current settings (hosted service, environment, RDC, etc.) from this profile without input them again. And this is very useful when we have more than one deployment settings. For example it would be able to have one AZUREPUBXML profile for deploying to testing environment (debug building, less roles with RDC and IntelliTrace) and one for production (release building, more roles but without IntelliTrace). In-Place Upgrade Support Let’s change some codes in the MVC pages and click the Publish menu from the azure project node. No need to specify any settings, here we can use the pervious settings by loading the azure profile file (AZUREPUBXML). After clicked the Publish button the VS Tool brought a dialog to us to indicate that there’s a deployment available in the hosted service environment, and prompt to REPLACE it or not. Notice that in this version, the dialog tool said “replace” rather than “delete”, which means by default the VS Tool will use In-Place Upgrade when we deploy to a hosted service that has a deployment already exist. After click Yes the VS Tool will upload the package and perform the In-Place Upgrade. If we back to the developer portal we can find that the status of the hosted service was turned to “Updating…”. But in the previous SDK, it will try to delete the whole deployment and publish a new one. Summary When the Microsoft announced the features that allows the changing VM size via In-Place Upgrade, they also mentioned that in the next few versions the user experience of publishing the azure application would be improved. The target was trying to accomplish the whole publish experience in Visual Studio, which means no need to touch developer portal any more. In the SDK 1.6 we can see from the new publish dialog, as a developer we can do the whole process, includes creating hosted service, specifying the environment, configuration, remote desktop, etc. values without going back the the developer portal. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Java FAQ: Tudo o que você precisa saber

- by Bruno.Borges

Com frequência recebo e-mails de clientes com dúvidas sobre "quando sairá a próxima versão do Java?", ou então "quando vai expirar o Java?" ou ainda "quais as mudanças da próxima versão?". Por isso resolvi escrever aqui um FAQ, respondendo estas dúvidas e muitas outras. Este post estará sempre atualizado, então se você possui alguma dúvida, envie para mim no Twitter @brunoborges. Qual a diferença entre o Oracle JDK e o OpenJDK?O projeto OpenJDK funciona como a implementação de referência Open Source do Java Standard Edition. Empresas como a Oracle, IBM, e Azul Systems suportam e investem no projeto OpenJDK para continuar evoluindo a plataforma Java. O Oracle JDK é baseado no OpenJDK, mas traz outras ferramentas como o Mission Control, e a máquina virtual traz algumas features avançadas como por exemplo o Flight Recorder. Até a versão 6, a Oracle oferecia duas máquinas virtuais: JRockit (BEA) e HotSpot (Sun). A partir da versão 7 a Oracle unificou as máquinas virtuais, e levou as features avançadas do JRockit para dentro da VM HotSpot. Leia também o OpenJDK FAQ. Onde posso obter binários beta Early Access do JDK 7, JDK 8, JDK 9 para testar?A partir do projeto OpenJDK, existe um projeto específico para cada versão do Java. Nestes projetos você pode encontrar binários beta Early Access, além do código-fonte. JDK 6 - http://jdk6.java.net/ JDK 7 - http://jdk7.java.net/ JDK 8 - http://jdk8.java.net/ JDK 9 - http://jdk9.java.net/ Quando acaba o suporte do Oracle Java SE 6, 7, 8? Somente produtos e versões com release oficial são suportados pela Oracle (exemplo: não há suporte para binários beta do JDK 7, JDK 8, ou JDK 9). Existem duas categorias de datas que o usuriário do Java deve estar ciente: EOPU - End of Public UpdatesMomento em que a Oracle não mais disponibiliza publicamente atualizações Oracle SupportPolítica de suporte da Oracle para produtos, incluindo o Oracle Java SE O Oracle Java SE é um produto e portando os períodos de suporte são regidos pelo Oracle Lifetime Support Policy. Consulte este documento para datas atualizadas e específicas para cada versão do Java. O Oracle Java SE 6 já atingiu EOPU (End of Public Updates) e agora é mantido e atualizado somente para clientes através de contrato comercial de suporte. Para maiores informações, consulte a página sobre Oracle Java SE Support. O mais importante aqui é você estar ciente sobre as datas de EOPU para as versões do Java SE da Oracle.Consulte a página do Oracle Java SE Support Roadmap e busque nesta página pela tabela com nome Java SE Public Updates. Nela você encontrará a data em que determinada versão do Java irá atingir EOPU. Como funciona o versionamento do Java?Em 2013, a Oracle divulgou um novo esquema de versionamento do Java para facilmente identificar quando é um release CPU e quando é um release LFR, e também para facilitar o planejamento e desenvolvimento de correções e features para futuras versões. CPU - Critical Patch UpdateAtualizações com correções de segurança. Versão será múltipla de 5, ou com soma de 1 para manter o número ímpar. Exemplos: 7u45, 7u51, 7u55. LFR - Limited Feature ReleaseAtualizações com correções de funcionalidade, melhorias de performance, e novos recursos. Versões de números pares múltiplos de 20, com final 0. Exemplos: 7u40, 7u60, 8u20. Qual a data da próxima atualização de segurança (CPU) do Java SE?Lançamentos do tipo CPU são controlados e pré-agendados pela Oracle e se aplicam a todos os produtos, inclusive o Oracle Java SE. Estes releases acontecem a cada 3 meses, sempre na Terça-feira mais próxima do dia 17 dos meses de Janeiro, Abril, Julho, e Outubro. Consulte a página Critical Patch Updates, Security Alerts and Third Party Bulleting para saber das próximas datas. Caso tenha interesse, você pode acompanhar através de recebimentos destes boletins diretamente no seu email. Veja como assinar o Boletim de Segurança da Oracle. Qual a data da próxima atualização de features (LFR) do Java SE?A Oracle reserva o direito de não divulgar estas datas, assim como o faz para todos os seus produtos. Entretanto é possível acompanhar o desenvolvimento da próxima versão pelos sites do projeto OpenJDK. A próxima versão do JDK 7 será o update 60 e binários beta Early Access já estão disponíveis para testes. A próxima versão doJDK 8 será o update 20 e binários beta Early Access já estão disponíveis para testes. Onde posso ver as mudanças e o que foi corrigido para a próxima versão do Java?A Oracle disponibiliza um changelog para cada binário beta Early Access divulgado no portal Java.net. JDK 7 update 60 changelogs JDK 8 update 20 changelogs Quando o Java da minha máquina (ou do meu usuário) vai expirar?Conheçendo o sistema de versionamento do Java e a periodicidade dos releases de CPU, o usuário pode determinar quando que um update do Java irá expirar. De todo modo, a cada novo update, a Oracle já informa quando que este update deverá expirar diretamente no release notes da versão. Por exemplo, no release notes da versão Oracle Java SE 7 update 55, está escrito na seção JRE Expiration Date o seguinte: The JRE expires whenever a new release with security vulnerability fixes becomes available. Critical patch updates, which contain security vulnerability fixes, are announced one year in advance on Critical Patch Updates, Security Alerts and Third Party Bulletin. This JRE (version 7u55) will expire with the release of the next critical patch update scheduled for July 15, 2014. For systems unable to reach the Oracle Servers, a secondary mechanism expires this JRE (version 7u55) on August 15, 2014. After either condition is met (new release becoming available or expiration date reached), the JRE will provide additional warnings and reminders to users to update to the newer version. For more information, see JRE Expiration Date.Ou seja, a versão 7u55 irá expirar com o lançamento do próximo release CPU, pré-agendado para o dia 15 de Julho de 2014. E caso o computador do usuário não possa se comunicar com o servidor da Oracle, esta versão irá expirar forçadamente no dia 15 de Agosto de 2014 (através de um mecanismo embutido na versão 7u55). O usuário não é obrigado a atualizar para versões LFR e portanto, mesmo com o release da versão 7u60, a versão atual 7u55 não irá expirar.Veja o release notes do Oracle Java SE 8 update 5. Encontrei um bug. Como posso reportar bugs ou problemas no Java SE, para a Oracle?Sempre que possível, faça testes com os binários beta antes da versão final ser lançada. Qualquer problema que você encontrar com estes binários beta, por favor descreva o problema através do fórum de Project Feebdack do JDK.Caso você encontre algum problema em uma versão final do Java, utilize o formulário de Bug Report. Importante: bugs reportados por estes sistemas não são considerados Suporte e portanto não há SLA de atendimento. A Oracle reserva o direito de manter o bug público ou privado, e também de informar ou não o usuário sobre o progresso da resolução do problema. Tenho uma dúvida que não foi respondida aqui. Como faço?Se você possui uma pergunta que não foi respondida aqui, envie para bruno.borges_at_oracle.com e caso ela seja pertinente, tentarei responder neste artigo. Para outras dúvidas, entre em contato pelo meu Twitter @brunoborges.

Read the article

UppercuT – Custom Extensions Now With PowerShell and Ruby

- by Robz / Fervent Coder

Arguably, one of the most powerful features of UppercuT (UC) is the ability to extend any step of the build process with a pre, post, or replace hook. This customization is done in a separate location from the build so you can upgrade without wondering if you broke the build. There is a hook before each step of the build has run. There is a hook after. And back to power again, there is a replacement hook. If you don’t like what the step is doing and/or you want to replace it’s entire functionality, you just drop a custom replacement extension and UppercuT will perform the custom step instead. Up until recently all custom hooks had to be written in NAnt. Now they are a little sweeter because you no longer need to use NAnt to extend UC if you don’t want to. You can use PowerShell. Or Ruby. Let that sink in for a moment. You don’t have to even need to interact with NAnt at all now. Extension Points On the wiki, all of the extension points are shown. The basic idea is that you would put whatever customization you are doing in a separate folder named build.custom. Each step Let’s take a look at all we can customize: The start point is default.build. It calls build.custom/default.pre.build if it exists, then it runs build/default.build (normal tasks) OR build.custom/default.replace.build if it exists, and finally build.custom/default.post.build if it exists. Every step below runs with the same extension points but changes on the file name it is looking for. NOTE: If you include default.replace.build, nothing else will run because everything is called from default.build. * policyChecks.step * versionBuilder.step NOTE: If you include build.custom/versionBuilder.replace.step, the items below will not run. - svn.step, tfs.step, or git.step (the custom tasks for these need to go in build.custom/versioners) * generateBuildInfo.step * compile.step * environmentBuilder.step * analyze.step NOTE: If you include build.custom/analyze.replace.step, the items below will not run. - test.step (the custom tasks for this need to go in build.custom/analyzers) NOTE: If you include build.custom/analyzers/test.replace.step, the items below will not run. + mbunit2.step, gallio.step, or nunit.step (the custom tasks for these need to go in build.custom/analyzers) - ncover.step (the custom tasks for this need to go in build.custom/analyzers) - ndepend.step (the custom tasks for this need to go in build.custom/analyzers) - moma.step (the custom tasks for this need to go in build.custom/analyzers) * package.step NOTE: If you include build.custom/package.replace.step, the items below will not run. - deploymentBuilder.step Customize UppercuT Builds With PowerShell UppercuT can now be extended with PowerShell (PS). To customize any extension point with PS, just add .ps1 to the end of the file name and write your custom tasks in PowerShell. If you are not signing your scripts you will need to change a setting in the UppercuT.config file. This does impose a security risk, because this allows PS to now run any PS script. This setting stays that way on ANY machine that runs the build until manually changed by someone. I’m not responsible if you mess up your machine or anyone else’s by doing this. You’ve been warned. Now that you are fully aware of any security holes you may open and are okay with that, let’s move on. Let’s create a file called default.replace.build.ps1 in the build.custom folder. Open that file in notepad and let’s add this to it: write-host "hello - I'm a custom task written in Powershell!" Now, let’s run build.bat. You could get some PSake action going here. I won’t dive into that in this post though. Customize UppercuT Builds With Ruby If you want to customize any extension point with Ruby, just add .rb to the end of the file name and write your custom tasks in Ruby. Let’s write a custom ruby task for UC. If you were thinking it would be the same as the one we just wrote for PS, you’d be right! In the build.custom folder, lets create a file called default.replace.build.rb. Open that file in notepad and let’s put this in there: puts "I'm a custom ruby task!" Now, let’s run build.bat again. That’s chunky bacon. UppercuT and Albacore.NET Just for fun, I wanted to see if I could replace the compile.step with a Rake task. Not just any rake task, Albacore’s msbuild task. Albacore is a suite of rake tasks brought about by Derick Bailey to make building .NET with Rake easier. It has quite a bit of support with developers that are using Rake to build code. In my build.custom folder, I drop a compile.replace.step.rb. I also put in a separate file that will contain my Albacore rake task and I call that compile.rb. What are the contents of compile.replace.step.rb? rake = 'rake' arguments= '-f ' + Dir.pwd + '/../build.custom/compile.rb' #puts "Calling #{rake} " + arguments system("#{rake} " + arguments) Since the custom extensions call ruby, we have to shell back out and call rake. That’s what we are doing here. We also realize that ruby is called from the build folder, so we need to back out and dive into the build.custom folder to find the file that is technically next to us. What are the contents of compile.rb? require 'rubygems' require 'fileutils' require 'albacore' task :default => [:compile] puts "Using Ruby to compile UppercuT with Albacore Tasks" desc 'Compile the source' msbuild :compile do |msb| msb.properties = { :configuration => :Release, :outputpath => '../../build_output/UppercuT' } msb.targets [:clean, :build] msb.verbosity = "quiet" msb.path_to_command = 'c:/Windows/Microsoft.NET/Framework/v3.5/MSBuild.exe' msb.solution = '../uppercut.sln' end We are using the msbuild task here. We change the output path to the build_output/UppercuT folder. The output path has “../../” because this is based on every project. We could grab the current directory and then point the task specifically to a folder if we have projects that are at different levels. We want the verbosity to be quiet so we set that as well. So what kind of output do you get for this? Let’s run build.bat custom_tasks_replace: [echo] Running custom tasks instead of normal tasks if C:\code\uppercut\build\..\build.custom\compile.replace.step exists. [exec] (in C:/code/uppercut/build) [exec] Using Ruby to compile UppercuT with Albacore Tasks [exec] Microsoft (R) Build Engine Version 3.5.30729.4926 [exec] [Microsoft .NET Framework, Version 2.0.50727.4927] [exec] Copyright (C) Microsoft Corporation 2007. All rights reserved. If you think this is awesome, you’d be right! With this knowledge you shall build.

Read the article

My Thoughts On the Xbox 180

- by Chris Gardner

Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

Read the article

CI Deployment Of Azure Web Roles Using TeamCity

- by srkirkland

After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint. By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly. Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly. Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/. If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx). These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly. You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file. Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory. If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner. Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward. Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%" Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } } function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress" $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" } function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress" # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" } Write-Output "Create Azure Deployment" Publish Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”. Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values). This should look like the following: Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity. You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.” This will bring up a dialog like the one below, where you can select the last change to use for your deployment. Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature. Enjoy!

Read the article

Improving Manageability of Virtual Environments

- by Jeff Victor

Boot Environments for Solaris 10 Branded Zones Until recently, Solaris 10 Branded Zones on Solaris 11 suffered one notable regression: Live Upgrade did not work. The individual packaging and patching tools work correctly, but the ability to upgrade Solaris while the production workload continued running did not exist. A recent Solaris 11 SRU (Solaris 11.1 SRU 6.4) restored most of that functionality, although with a slightly different concept, different commands, and without all of the feature details. This new method gives you the ability to create and manage multiple boot environments (BEs) for a Solaris 10 Branded Zone, and modify the active or any inactive BE, and to do so while the production workload continues to run. Background In case you are new to Solaris: Solaris includes a set of features that enables you to create a bootable Solaris image, called a Boot Environment (BE). This newly created image can be modified while the original BE is still running your workload(s). There are many benefits, including improved uptime and the ability to reboot into (or downgrade to) an older BE if a newer one has a problem. In Solaris 10 this set of features was named Live Upgrade. Solaris 11 applies the same basic concepts to the new packaging system (IPS) but there isn't a specific name for the feature set. The features are simply part of IPS. Solaris 11 Boot Environments are not discussed in this blog entry. Although a Solaris 10 system can have multiple BEs, until recently a Solaris 10 Branded Zone (BZ) in a Solaris 11 system did not have this ability. This limitation was addressed recently, and that enhancement is the subject of this blog entry. This new implementation uses two concepts. The first is the use of a ZFS clone for each BE. This makes it very easy to create a BE, or many BEs. This is a distinct advantage over the Live Upgrade feature set in Solaris 10, which had a practical limitation of two BEs on a system, when using UFS. The second new concept is a very simple mechanism to indicate the BE that should be booted: a ZFS property. The new ZFS property is named com.oracle.zones.solaris10:activebe (isn't that creative? ). It's important to note that the property is inherited from the original BE's file system to any BEs you create. In other words, all BEs in one zone have the same value for that property. When the (Solaris 11) global zone boots the Solaris 10 BZ, it boots the BE that has the name that is stored in the activebe property. Here is a quick summary of the actions you can use to manage these BEs: To create a BE: Create a ZFS clone of the zone's root dataset To activate a BE: Set the ZFS property of the root dataset to indicate the BE To add a package or patch to an inactive BE: Mount the inactive BE Add packages or patches to it Unmount the inactive BE To list the available BEs: Use the "zfs list" command. To destroy a BE: Use the "zfs destroy" command. Preparation Before you can use the new features, you will need a Solaris 10 BZ on a Solaris 11 system. You can use these three steps - on a real Solaris 11.1 server or in a VirtualBox guest running Solaris 11.1 - to create a Solaris 10 BZ. The Solaris 11.1 environment must be at SRU 6.4 or newer. Create a flash archive on the Solaris 10 system s10# flarcreate -n s10-system /net/zones/archives/s10-system.flar Configure the Solaris 10 BZ on the Solaris 11 system s11# zonecfg -z s10z Use 'create' to begin configuring a new zone. zonecfg:s10z create -t SYSsolaris10 zonecfg:s10z set zonepath=/zones/s10z zonecfg:s10z exit s11# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - s10z configured /zones/s10z solaris10 excl Install the zone from the flash archive s11# zoneadm -z s10z install -a /net/zones/archives/s10-system.flar -p You can find more information about the migration of Solaris 10 environments to Solaris 10 Branded Zones in the documentation. The rest of this blog entry demonstrates the commands you can use to accomplish the aforementioned actions related to BEs. New features in action Note that the demonstration of the commands occurs in the Solaris 10 BZ, as indicated by the shell prompt "s10z# ". Many of these commands can be performed in the global zone instead, if you prefer. If you perform them in the global zone, you must change the ZFS file system names. Create The only complicated action is the creation of a BE. In the Solaris 10 BZ, create a new "boot environment" - a ZFS clone. You can assign any name to the final portion of the clone's name, as long as it meets the requirements for a ZFS file system name. s10z# zfs snapshot rpool/ROOT/zbe-0@snap s10z# zfs clone -o mountpoint=/ -o canmount=noauto rpool/ROOT/zbe-0@snap rpool/ROOT/newBE cannot mount 'rpool/ROOT/newBE' on '/': directory is not empty filesystem successfully created, but not mounted You can safely ignore that message: we already know that / is not empty! We have merely told ZFS that the default mountpoint for the clone is the root directory. List the available BEs and active BE Because each BE is represented by a clone of the rpool/ROOT dataset, listing the BEs is as simple as listing the clones. s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.55G 42.9G 31K legacy rpool/ROOT/zbe-0 1K 42.9G 3.55G / rpool/ROOT/newBE 3.55G 42.9G 3.55G / The output shows that two BEs exist. Their names are "zbe-0" and "newBE". You can tell Solaris that one particular BE should be used when the zone next boots by using a ZFS property. Its name is com.oracle.zones.solaris10:activebe. The value of that property is the name of the clone that contains the BE that should be booted. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local Change the active BE When you want to change the BE that will be booted next time, you can just change the activebe property on the rpool/ROOT dataset. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local s10z# zfs set com.oracle.zones.solaris10:activebe=newBE rpool/ROOT s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# shutdown -y -g0 -i6 After the zone has rebooted: s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# zfs mount rpool/ROOT/newBE / rpool/export /export rpool/export/home /export/home rpool /rpool Mount the original BE to see that it's still there. s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# ls /mnt Desktop export platform Documents export.backup.20130607T214951Z proc S10Flar home rpool TT_DB kernel sbin bin lib system boot lost+found tmp cdrom mnt usr dev net var etc opt Patch an inactive BE At this point, you can modify the original BE. If you would prefer to modify the new BE, you can restore the original value to the activebe property and reboot, and then mount the new BE to /mnt (or another empty directory) and modify it. Let's mount the original BE so we can modify it. (The first command is only needed if you haven't already mounted that BE.) s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# patchadd -R /mnt -M /var/sadm/spool 104945-02 Note that the typical usage will be: Create a BE Mount the new (inactive) BE Use the package and patch tools to update the new BE Unmount the new BE Reboot Delete an inactive BE ZFS clones are children of their parent file systems. In order to destroy the parent, you must first "promote" the child. This reverses the parent-child relationship. (For more information on this, see the documentation.) The original rpool/ROOT file system is the parent of the clones that you create as BEs. In order to destroy an earlier BE that is that parent of other BEs, you must first promote one of the child BEs to be the ZFS parent. Only then can you destroy the original BE. Fortunately, this is easier to do than to explain: s10z# zfs promote rpool/ROOT/newBE s10z# zfs destroy rpool/ROOT/zbe-0 s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.56G 269G 31K legacy rpool/ROOT/newBE 3.56G 269G 3.55G / Documentation This feature is so new, it is not yet described in the Solaris 11 documentation. However, MOS note 1558773.1 offers some details. Conclusion With this new feature, you can add and patch packages to boot environments of a Solaris 10 Branded Zone. This ability improves the manageability of these zones, and makes their use more practical. It also means that you can use the existing P2V tools with earlier Solaris 10 updates, and modify the environments after they become Solaris 10 Branded Zones.

Read the article

Curing the Database-Application mismatch

- by Phil Factor

If an application requires access to a database, then you have to be able to deploy it so as to be version-compatible with the database, in phase. If you can deploy both together, then the application and database must normally be deployed at the same version in which they, together, passed integration and functional testing. When a single database supports more than one application, then the problem gets more interesting. I’ll need to be more precise here. It is actually the application-interface definition of the database that needs to be in a compatible ‘version’. Most databases that get into production have no separate application-interface; in other words they are ‘close-coupled’. For this vast majority, the whole database is the application-interface, and applications are free to wander through the bowels of the database scot-free. If you’ve spurned the perceived wisdom of application architects to have a defined application-interface within the database that is based on views and stored procedures, any version-mismatch will be as sensitive as a kitten. A team that creates an application that makes direct access to base tables in a database will have to put a lot of energy into keeping Database and Application in sync, to say nothing of having to tackle issues such as security and audit. It is not the obvious route to development nirvana. I’ve been in countless tense meetings with application developers who initially bridle instinctively at the apparent restrictions of being ‘banned’ from the base tables or routines of a database. There is no good technical reason for needing that sort of access that I’ve ever come across. Everything that the application wants can be delivered via a set of views and procedures, and with far less pain for all concerned: This is the application-interface. If more than zero developers are creating a database-driven application, then the project will benefit from the loose-coupling that an application interface brings. What is important here is that the database development role is separated from the application development role, even if it is the same developer performing both roles. The idea of an application-interface with a database is as old as I can remember. The big corporate or government databases generally supported several applications, and there was little option. When a new application wanted access to an existing corporate database, the developers, and myself as technical architect, would have to meet with hatchet-faced DBAs and production staff to work out an interface. Sure, they would talk up the effort involved for budgetary reasons, but it was routine work, because it decoupled the database from its supporting applications. We’d be given our own stored procedures. One of them, I still remember, had ninety-two parameters. All database access was encapsulated in one application-module. If you have a stable defined application-interface with the database (Yes, one for each application usually) you need to keep the external definitions of the components of this interface in version control, linked with the application source, and carefully track and negotiate any changes between database developers and application developers. Essentially, the application development team owns the interface definition, and the onus is on the Database developers to implement it and maintain it, in conformance. Internally, the database can then make all sorts of changes and refactoring, as long as source control is maintained. If the application interface passes all the comprehensive integration and functional tests for the particular version they were designed for, nothing is broken. Your performance-testing can ‘hang’ on the same interface, since databases are judged on the performance of the application, not an ‘internal’ database process. The database developers have responsibility for maintaining the application-interface, but not its definition, as they refactor the database. This is easily tested on a daily basis since the tests are normally automated. In this setting, the deployment can proceed if the more stable application-interface, rather than the continuously-changing database, passes all tests for the version of the application. Normally, if all goes well, a database with a well-designed application interface can evolve gracefully without changing the external appearance of the interface, and this is confirmed by integration tests that check the interface, and which hopefully don’t need to be altered at all often. If the application is rapidly changing its ‘domain model’ in the light of an increased understanding of the application domain, then it can change the interface definitions and the database developers need only implement the interface rather than refactor the underlying database. The test team will also have to redo the functional and integration tests which are, of course ‘written to’ the definition. The Database developers will find it easier if these tests are done before their re-wiring job to implement the new interface. If, at the other extreme, an application receives no further development work but survives unchanged, the database can continue to change and develop to keep pace with the requirements of the other applications it supports, and needs only to take care that the application interface is never broken. Testing is easy since your automated scripts to test the interface do not need to change. The database developers will, of course, maintain their own source control for the database, and will be likely to maintain versions for all major releases. However, this will not need to be shared with the applications that the database servers. On the other hand, the definition of the application interfaces should be within the application source. Changes in it have to be subject to change-control procedures, as they will require a chain of tests. Once you allow, instead of an application-interface, an intimate relationship between application and database, we are in the realms of impedance mismatch, over and above the obvious security problems. Part of this impedance problem is a difference in development practices. Whereas the application has to be regularly built and integrated, this isn’t necessarily the case with the database. An RDBMS is inherently multi-user and self-integrating. If the developers work together on the database, then a subsequent integration of the database on a staging server doesn’t often bring nasty surprises. A separate database-integration process is only needed if the database is deliberately built in a way that mimics the application development process, but which hampers the normal database-development techniques. This process is like demanding a official walking with a red flag in front of a motor car. In order to closely coordinate databases with applications, entire databases have to be ‘versioned’, so that an application version can be matched with a database version to produce a working build without errors. There is no natural process to ‘version’ databases. Each development project will have to define a system for maintaining the version level. A curious paradox occurs in development when there is no formal application-interface. When the strains and cracks happen, the extra meetings, bureaucracy, and activity required to maintain accurate deployments looks to IT management like work. They see activity, and it looks good. Work means progress. Management then smile on the design choices made. In IT, good design work doesn’t necessarily look good, and vice versa.

Read the article

Summit Time!

- by Ajarn Mark Caldwell

Boy, how time flies! I can hardly believe that the 2011 PASS Summit is just one week away. Maybe it snuck up on me because it’s a few weeks earlier than last year. Whatever the cause, I am really looking forward to next week. The PASS Summit is the largest SQL Server conference in the world and a fantastic networking opportunity thrown in for no additional charge. Here are a few thoughts to help you maximize the week. Networking As Karen Lopez (blog | @DataChick) mentioned in her presentation for the Professional Development Virtual Chapter just a couple of weeks ago, “Don’t wait until you need a new job to start networking.” You should always be working on your professional network. Some people, especially technical-minded people, get confused by the term networking. The first image that used to pop into my head was the image of some guy standing, awkwardly, off to the side of a cocktail party, trying to shmooze those around him. That’s not what I’m talking about. If you’re good at that sort of thing, and you can strike up a conversation with some stranger and learn all about them in 5 minutes, and walk away with your next business deal all but approved by the lawyers, then congratulations. But if you’re not, and most of us are not, I have two suggestions for you. First, register for Don Gabor’s 2-hour session on Tuesday at the Summit called Networking to Build Business Contacts. Don is a master at small talk, and at teaching others, and in just those two short hours will help you with important tips about breaking the ice, remembering names, and smooth transitions into and out of conversations. Then go put that great training to work right away at the Tuesday night Welcome Reception and meet some new people; which is really my second suggestion…just meet a few new people. You see, “networking” is about meeting new people and being friendly without trying to “work it” to get something out of the relationship at this point. In fact, Don will tell you that a better way to build the connection with someone is to look for some way that you can help them, not how they can help you. There are a ton of opportunities as long as you follow this one key point: Don’t stay in your hotel! At the least, get out and go to the free events such as the Tuesday night Welcome Reception, the Wednesday night Exhibitor Reception, and the Thursday night Community Appreciation Party. All three of these are perfect opportunities to meet other professionals with a similar job or interest as you, and you never know how that may help you out in the future. Maybe you just meet someone to say HI to at breakfast the next day instead of eating alone. Or maybe you cross paths several times throughout the Summit and compare notes on different sessions you attended. And you just might make new friends that you look forward to seeing year after year at the Summit. Who knows, it might even turn out that you have some specific experience that will help out that other person a few months’ from now when they run into the same challenge that you just overcame, or vice-versa. But the point is, if you don’t get out and meet people, you’ll never have the chance for anything else to happen in the future. One more tip for shy attendees of the Summit…if you can’t bring yourself to strike up conversation with strangers at these events, then at the least, after you sit through a good session that helps you out, go up to the speaker and introduce yourself and thank them for taking the time and effort to put together their presentation. Ideally, when you do this, tell them WHY it was beneficial to you (e.g. “Now I have a new idea of how to tackle a problem back at the office.”) I know you think the speakers are all full of confidence and are always receiving a ton of accolades and applause, but you’re wrong. Most of them will be very happy to hear first-hand that all the work they put into getting ready for their presentation is paying off for somebody. Training With over 170 technical sessions at the Summit, training is what it’s all about, and the training is fantastic! Of course there are the big-name trainers like Paul Randall, Kimberly Tripp, Kalen Delaney, Itzik Ben-Gan and several others, but I am always impressed by the quality of the training put on by so many other “regular” members of the SQL Server community. It is amazing how you don’t have to be a published author or otherwise recognized as an “expert” in an area in order to make a big impact on others just by sharing your personal experience and lessons learned. I would rather hear the story of, and lessons learned from, “some guy or gal” who has actually been through an issue and came out the other side, than I would a trained professor who is speaking just from theory or an intellectual understanding of a topic. In addition to the three full days of regular sessions, there are also two days of pre-conference intensive training available. There is an extra cost to this, but it is a fantastic opportunity. Think about it…you’re already coming to this area for training, so why not extend your stay a little bit and get some in-depth training on a particular topic or two? I did this for the first time last year. I attended one day of extra training and it was well worth the time and money. One of the best reasons for it is that I am extremely busy at home with my regular job and family, that it was hard to carve out the time to learn about the topic on my own. It worked out so well last year that I am doubling up and doing two days or “pre-cons” this year. And then there are the DVDs. I think these are another great option. I used the online schedule builder to get ready and have an idea of which sessions I want to attend and when they are (much better than trying to figure this out at the last minute every day). But the problem that I have run into (seems this happens every year) is that nearly every session block has two different sessions that I would like to attend. And some of them have three! ACK! That won’t work! What is a guy supposed to do? Well, one option is to purchase the DVDs which are recordings of the audio and projected images from each session so you can continue to attend sessions long after the Summit is officially over. Yes, many (possibly all) of these also get posted online and attendees can access those for no extra charge, but those are not necessarily all available as quickly as the DVD recording are, and the DVDs are often more convenient than downloading, especially if you want to share the training with someone who was not able to attend in person. Remember, I don’t make any money or get any other benefit if you buy the DVDs or from anything else that I have recommended here. These are just my own thoughts, trying to help out based on my experiences from the 8 or so Summits I have attended. There is nothing like the Summit. It is an awesome experience, fantastic training, and a whole lot of fun which is just compounded if you’ll take advantage of the first part of this article and make some new friends along the way.

Read the article

Announcing: Improvements to the Windows Azure Portal

- by ScottGu

Earlier today we released a number of enhancements to the new Windows Azure Management Portal. These new capabilities include: Service Bus Management and Monitoring Support for Managing Co-administrators Import/Export support for SQL Databases Virtual Machine Experience Enhancements Improved Cloud Service Status Notifications Media Services Monitoring Support Storage Container Creation and Access Control Support All of these improvements are now live in production and available to start using immediately. Below are more details on them: Service Bus Management and Monitoring The new Windows Azure Management Portal now supports Service Bus management and monitoring. Service Bus provides rich messaging infrastructure that can sit between applications (or between cloud and on-premise environments) and allow them to communicate in a loosely coupled way for improved scale and resiliency. With the new Service Bus experience, you can now create and manage Service Bus Namespaces, Queues, Topics, Relays and Subscriptions. You can also get rich monitoring for Service Bus Queues, Topics and Subscriptions. To create a Service Bus namespace, you can now select the “Service Bus” tab in the Windows Azure portal and then simply select the CREATE command: Doing so will bring up a new “Create a Namespace” dialog that allows you to name and create a new Service Bus Namespace: Once created, you can obtain security credentials associated with the Namespace via the ACCESS KEY command. This gives you the ability to obtain the connection string associated with the service namespace. You can copy and paste these values into any application that requires these credentials: It is also now easy to create Service Bus Queues and Topics via the NEW experience in the portal drawer. Simply click the NEW command and navigate to the “App Services” category to create a new Service Bus entity: Once you provision a new Queue or Topic it can be managed in the portal. Clicking on a namespace will display all queues and topics within it: Clicking on an item in the list will allow you to drill down into a dashboard view that allows you to monitor the activity and traffic within it, as well as perform operations on it. For example, below is a view of an “orders” queue – note how we now surface both the incoming and outgoing message flow rate, as well as the total queue length and queue size: To monitor pub/sub subscriptions you can use the ADD METRICS command within a topic and select a specific subscription to monitor. Support for Managing Co-Administrators You can now add co-administrators for your Windows Azure subscription using the new Windows Azure Portal. This allows you to share management of your Windows Azure services with other users. Subscription co-administrators share the same administrative rights and permissions that service administrator have - except a co-administrator cannot change or view billing details about the account, nor remove the service administrator from a subscription. In the SETTINGS section, click on the ADMINISTRATORS tab, and select the ADD button to add a co-administrator to your subscription: To add a co-administrator, you specify the email address for a Microsoft account (formerly Windows Live ID) or an organizational account, and choose the subscription you want to add them to: You can later update the subscriptions that the co-administrator has access to by clicking on the EDIT button, and then select or deselect the subscriptions to which they belong. Import/Export Support for SQL Databases The Windows Azure administration portal now supports importing and exporting SQL Databases to/from Blob Storage. Databases can be imported/exported to blob storage using the same BACPAC file format that is supported with SQL Server 2012. Among other benefits, this makes it easy to copy and migrate databases between on-premise and cloud environments. SQL Databases now have an EXPORT command in the bottom drawer that when pressed will prompt you to save your database to a Windows Azure storage container: The UI allows you to choose an existing storage account or create a new one, as well as the name of the BACPAC file to persist in blob storage: You can also now import and create a new SQL Database by using the NEW command. This will prompt you to select the storage container and file to import the database from: The Windows Azure Portal enables you to monitor the progress of import and export operations. If you choose to log out of the portal, you can come back later and check on the status of all of the operations in the new history tab of the SQL Database server – this shows your entire import and export history and the status (success/fail) of each: Enhancements to the Virtual Machine Experience One of the common pain-points we have heard from customers using the preview of our new Virtual Machine support has been the inability to delete the associated VHDs when a VM instance (or VM drive) gets deleted. Prior to today’s release the VHDs would continue to be in your storage account and accumulate storage charges. You can now navigate to the Disks tab within the Virtual Machine extension, select a VM disk to delete, and click the DELETE DISK command: When you click the DELETE DISK button you have the option to delete the disk + associated .VHD file (completely clearing it from storage). Alternatively you can delete the disk but still retain a .VHD copy of it in storage. Improved Cloud Service Status Notifications The Windows Azure portal now exposes more information of the health status of role instances. If any of the instances are in a non-running state, the status at the top of the dashboard will summarize the status (and update automatically as the role health changes): Clicking the instance hyperlink within this status summary view will navigate you to a detailed role instance view, and allow you to get more detailed health status of each of the instances. The portal has been updated to provide more specific status information within this detailed view – giving you better visibility into the health of your app: Monitoring Support for Media Services Windows Azure Media Services allows you to create media processing jobs (for example: encoding media files) in your Windows Azure Media Services account. In the Windows Azure Portal, you can now monitor the number of encoding jobs that are queued up for processing as well as active, failed and queued tasks for encoding jobs. On your media services account dashboard, you can visualize the monitoring data for last 6 hours, 24 hours or 7 days. Storage Container Creation and Access Control Support You can now create Windows Azure Storage storage containers from within the Windows Azure Portal. After selecting a storage account, you can navigate to the CONTAINERS tab and click the ADD CONTAINER command: This will display a dialog that lets you name the new container and control access to it: You can also update the access setting as well as container metadata of existing containers by selecting one and then using the new EDIT CONTAINER command: This will then bring up the edit container dialog that allows you to change and save its settings: In addition to creating and editing containers, you can click on them within the portal to drill-in and view blobs within them. Summary The above features are all now live in production and available to use immediately. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today. Visit the Windows Azure Developer Center to learn more about how to build apps with it. We’ll have even more new features and enhancements coming later this month – including support for the recent Windows Server 2012 and .NET 4.5 releases (we will enable new web and worker role images with Windows Server 2012 and .NET 4.5, and support .NET 4.5 with Websites). Keep an eye out on my blog for details as these new features become available. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

More Great Improvements to the Windows Azure Management Portal

- by ScottGu

Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal. These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately. Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them. You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it. This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts. You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it. This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site. After that, subsequent sites could only be created in that same region. This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region. This allows you to now deploy sites to North America, Europe and Asia simultaneously. Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories). Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role. The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal. This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab. All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure. Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server). When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server. You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code. Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts. To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today. Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners. It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Search Results

Search found 8589 results on 344 pages for 'pre production'.

Page 152/344 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159 | Next Page >

- by codykrieger

- by user1637491

- by Chris

- by womp

- by ramdaz

- by g18c

- by Karan

- by mseika

- by ScottGu

- by shiju

- by olaf.heimburger

- by Compudicted

- by FransBouma

- by pinaldave

- by Sadequl Hussain

- by Shaun

- by Bruno.Borges

- by Robz / Fervent Coder

- by Chris Gardner

- by srkirkland

- by Jeff Victor

- by Phil Factor

- by Ajarn Mark Caldwell

- by ScottGu

- by ScottGu

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159 | Next Page >