Search Results

Search found 14597 results on 584 pages for 'zend studio'.

Page 152/584 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

  • Speed up loading of test results from builds in Visual Studio

    - by Jakob Ehn
    I still see people complaining about the long time it takes to load test results from a TFS build in Visual Studio. And they make a valid point, it does take a very long time to load the test results, even for a small number of tests. The reason for this is that the test results is not just the result of the test run but also all the binaries that were part of the test run. This often also means that the debug symbols (*.pdb) will be downloaded to your local machine. This reason for this behaviour is that it letsyou re-run the tests locally. However, most of the times this is not what the developer will do, they just want to know which tests failed and why. They can then fix the tests and rerun them locally. It turns out there is a way to load only the test results, which is much faster. The only tricky bit is to find the location of the .trx file that is generated during the build. Particularly in TFS 2010 where you often have multiple build agents, which of corse results in different paths to the trx file. Note: To use this you must have read permission to the build folder on the build agent where the build was executed. Open the build result for the build Click View Log Locate the part where MSTest is invoked. When using test containers, it looks like this:   Note: You can actually search in the log window, press Ctrl+F and you will get a little search box at the bottom. Nice! On the MSTest command line call, locate the /resultsfileroot parameter, which points to the folder where the test results are stored Note that this path is local for the build server, so you need to replace the drive letter with the server name: D:\Builds\Project\TestResults to \Project\TestResults">\\<BuildServer>\Project\TestResults Double-click on the .trx file and you will notice that it loads much faster compared to opening it from the build log window

    Read the article

  • Sample Browser Visual Studio Extension is localized and introduced to Japan

    - by Jialiang
    http://blogs.msdn.com/b/codefx/archive/2012/10/14/sample-browser-visual-studio-extension-is-localized-and-introduced-to-japan.aspx  ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????From: Japan MVP   "The Sample Browser is very easy to use thanks to the refined interface.  The categorized menu enables faster search. Highly acclaimed.  But it need localization. It may not be a problem for those who can understand English, but I think localizing Sample Browser into Japanese will promote its use in Japan further." This is a prominent feedback collected from the Japan MVP community since we released the last version of Sample Browser, which was only available in English.  Japan developers like the Sample Browser, but they want localized code samples, localized Sample Browser UI, and the localized search experience.  The Japan MVP lead, Satoru Kitabata, observed these needs and expectations.  He started to engage with all local developer MVPs to translate the UI elements in the Sample Browser.  Lots of MVPs signed up to participate in this work.  They had roundtables and newsletters to track the progress.  In short three weeks, every control, every tooltip, every font on every label, was beautifully tuned for Japanese.  The sample search experience was also optimized for Japan developers - they can directly type Japanese query to search for code samples.  Together with Microsoft Japan MVPs, the sample use experience is localized and improved to a new level!    The Japan MVP Lead, Satoru Kitabata, further worked with MSDN Japan site manager and Japan DPE to introduce the good news of localized Sample Browser to Japan Sample Browser  http://msdn.microsoft.com/ja-jp/jj730399 Sample Browser?????? http://msdn.microsoft.com/ja-jp/jj730398     Thanks to the joint effort and Japan MVPs’ feedback and contributions, the Sample Browser gets the chance to benefit the broader Japan developer audience.

    Read the article

  • Efficient coding in Visual Studio (or another IDE), with touch typing

    - by cheeesus
    Moving the cursor to another position in code is one of the most frequent actions when coding. I don't write my programs from the beginning to the end, like a letter. However, moving the cursor requires me to move my right hand to the key arrows or to the mouse, which feels like an interruption to my writing rhythm, since I'm using touch typing. I want my hands to rest on the keyboard. It's difficult to explain what I mean, but I think every coder using touch typing knows what I mean. I tried many things, like defining some shortcuts as surrogate arrow keys (Shift+Alt+J, K, L, I), or buying a keyboard with a Trackpoint, Trackpad, or Trackball on it, but I have not yet found a satisfying solution to the problem. What is the best solution you know of, regardless of which IDE you use? Edit: Thank you for your answers. I am using a lot of shortkeys, but I think using a Vim plugin in Visual Studio would interfere too much with the shortkeys I am used to. Also, I have a keyboard with a built-in mouse, but I'm still looking for a better solution.

    Read the article

  • Setting XSL-FO XML Schema in Visual Studio

    - by Lukasz Kurylo
    I'm playing lately with an XSL-FO for generating a pdf documents. XSL-FO has a long list of available tags and attributes, which for a new guy who want to create a simple document is a nightmare to find a proper one. Fortunatelly we can set an schema for XSL-FO, so will result in acquire a full intellisense in VS. For a simple *.fo file, we can set the path to the schema directly in file: <?xml version="1.0" encoding="utf-8"?> <fo:root       xmlns:fo="http://www.w3.org/1999/XSL/Format"       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"       xsi:schemaLocation=" http://www.w3.org/1999/XSL/Format http://www.xmlblueprint.com/documents/fop.xsd"> ...   We can of course use the build in VS XML Schemas selector. To use it, we must copy the schema file to the Schemas catalog (defaut path for VS2012 is C:\Program Files (x86)\Microsoft Visual Studio 11.0\Xml\Schemas). Then we can go to Properties of the opened xml/xslt file and set the new added schema to file:                 From now, we should have an enable intellisense as shown below: .

    Read the article

  • Cannot get temperatures in Dell Studio 1558

    - by Athul Iddya
    I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

    Read the article

  • Stumbling Through: Visual Studio 2010 (Part IV)

    So finally we get to the fun part the fruits of all of our middle-tier/back end labors of generating classes to interface with an XML data source that the previous posts were about can now be presented quickly and easily to an end user.  I think.  Well see.  Well be using a WPF window to display all of our various MFL information that weve collected in the two XML files, and well provide a means of adding, updating and deleting each of these entities using as little code as possible.  Additionally, I would like to dig into the performance of this solution as well as the flexibility of it if were were to modify the underlying XML schema.  So first things first, lets create a WPF project and include our xml data in a data folder within.  On the main window, well drag out the following controls: A combo box to contain all of the teams A list box to show the players of the selected team, along with add/delete player buttons A text box tied to the selected players name, with a save button to save any changes made to the player name A combo box of all the available positions, tied to the currently selected players position A data grid tied to the statistics of the currently selected player, with add/delete statistic buttons This monstrosity of a form and its associated project will look like this (dont forget to reference the DataFoundation project from the Presentation project): To get to the visual data binding, as we learned in a previous post, you have to first make sure the project containing your bindable classes is compiled.  Do so, and then open the Data Sources pane to add a reference to the Teams and Positions classes in the DataFoundation project: Why only Team and Position?  Well, we will get to Players from Teams, and Statistics from Players so no need to make an interface for them as well see in a second.  As for Positions, well need a way to bind the dropdown to ALL positions they dont appear underneath any of the other classes so we need to reference it directly.  After adding these guys, expand every node in your Data Sources pane and see how the Team node allows you to drill into Players and then Statistics.  This is why there was no need to bring in a reference to those classes for the UI we are designing: Now for the seriously hard work of binding all of our controls to the correct data sources.  Drag the following items from the Data Sources pane to the specified control on the window design canvas: Team.Name > Teams combo box Team.Players.Name > Players list box Team.Players.Name > Player name text box Team.Players.Statistics > Statistics data grid Position.Name > Positions combo box That is it!  Really?  Well, no, not really there is one caveat here in that the Positions combo box is not bound the selected players position.  To do so, we will apply a binding to the position combo boxs SelectedValue to point to the current players PositionId value: That should do the trick now, all we need to worry about is loading the actual data.  Sadly, it appears as if we will need to drop to code in order to invoke our IO methods to load all teams and positions.  At least Visual Studio kindly created the stubs for us to do so, ultimately the code should look like this: Note the weirdness with the InitializeDataFiles call that is my current means of telling an IO where to load the data for each of the entities.  I havent thought of a more intuitive way than that yet, but do note that all data is loaded from Teams.xml besides for positions, which is loaded from Lookups.xml.   I think that may be all we need to do to at least load all of the data, lets run it and see: Yay!  All of our glorious data is being displayed!  Er, wait, whats up with the position dropdown?  Why is it red?  Lets select the RB and see if everything updates: Crap, the position didnt update to reflect the selected player, but everything else did.  Where did we go wrong in binding the position to the selected player?  Thinking about it a bit and comparing it to how traditional data binding works, I realize that we never set the value member (or some similar property) to tell the control to join the Id of the source (positions) to the position Id of the player.  I dont see a similar property to that on the combo box control, but I do see a property named SelectedValuePath that might be it, so I set it to Id and run the app again: Hey, all right!  No red box around the positions combo box.  Unfortunately, selecting the RB does not update the dropdown to point to Runningback.  Hmmm.  Now what could it be?  Maybe the problem is that we are loading teams before we are loading positions, so when it binds position Id, all of the positions arent loaded yet.  I went to the code behind and switched things so position loads first and no dice.  Same result when I run.  Why?  WHY?  Ok, ok, calm down, take a deep breath.  Get something with caffeine or sugar (preferably both) and think rationally. Ok, gigantic chocolate chip cookie and a mountain dew chaser have never let me down in the past, so dont fail me now!  Ah ha!  of course!  I didnt even have to finish the mountain dew and I think Ive got it:  Data Context.  By default, when setting on the selected value binding for the dropdown, the data context was list_team.  I dont even know what the heck list_team is, we want it to be bound to our team players view source resource instead, like this: Running it now and selecting the various players: Done and done.  Everything read and bound, thank you caffeine and sugar!  Oh, and thank you Visual Studio 2010.  Lets wire up some of those buttons now There has got to be a better way to do this, but it works for now.  What the add player button does is add a new player object to the currently selected team.  Unfortunately, I couldnt get the new object to automatically show up in the players list (something about not using an observable collection gotta look into this) so I just save the change immediately and reload the screen.  Terrible, but it works: Lets go after something easier:  The save button.  By default, as we type in new text for the players name, it is showing up in the list box as updated.  Cool!  Why couldnt my add new player logic do that?  Anyway, the save button should be as simple as invoking MFL.IO.Save for the selected player, like this: MFL.IO.Save((MFL.Player)lbTeamPlayers.SelectedItem, true); Surprisingly, that worked on the first try.  Lets see if we get as lucky with the Delete player button: MFL.IO.Delete((MFL.Player)lbTeamPlayers.SelectedItem); Refresh(); Note the use of the Refresh method again I cant seem to figure out why updates to the underlying data source are immediately reflected, but adds and deletes are not.  That is a problem for another day, and again my hunch is that I should be binding to something more complex than IEnumerable (like observable collection). Now that an example of the basic CRUD methods are wired up, I want to quickly investigate the performance of this beast.  Im going to make a special button to add 30 teams, each with 50 players and 10 seasons worth of stats.  If my math is right, that will end up with 15000 rows of data, a pretty hefty amount for an XML file.  The save of all this new data took a little over a minute, but that is acceptable because we wouldnt typically be saving batches of 15k records, and the resulting XML file size is a little over a megabyte.  Not huge, but big enough to see some read performance numbers or so I thought.  It reads this file and renders the first team in under a second.  That is unbelievable, but we are lazy loading and the file really wasnt that big.  I will increase it to 50 teams with 100 players and 20 seasons each - 100,000 rows.  It took a year and a half to save all of that data, and resulted in an 8 megabyte file.  Seriously, if you are loading XML files this large, get a freaking database!  Despite this, it STILL takes under a second to load and render the first team, which is interesting mostly because I thought that it was loading that entire 8 MB XML file behind the scenes.  I have to say that I am quite impressed with the performance of the LINQ to XML approach, particularly since I took no efforts to optimize any of this code and was fairly new to the concept from the start.  There might be some merit to this little project after all Look out SQL Server and Oracle, use XML files instead!  Next up, I am going to completely pull the rug out from under the UI and change a number of entities in our model.  How well will the code be regenerated?  How much effort will be required to tie things back together in the UI?Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Visual Studio 2008 doesn't create *.refresh files for external DLL references... what am I missing?

    - by Cory Larson
    Hi all-- I've got a question about something that's just been irritating me. A colleague and I are building a support framework for our current client that we want to reference in other projects. The DLL we want as a reference in our project would be an external reference. We're adding it by doing "Add Reference...", then browsing to the location of the .dll. What I want Visual Studio to do is only add the .xml, .pdb, and a .dll.refresh file, but instead it copies the actual .dll (and .xml and .pdb) into the bin. When we rebuild the framework project, the other project that uses its .dll gets all out of whack until we drop and re-add the reference. Everything I've read online says that VS2008 is supposed to create the .dll.refresh files for you, but it never does. Any ideas? Am I missing something or doing something wrong? At this point I'm ready to add a pre-build event to simply copy the framework .dll into my bin, but the .refresh file seems like less of a hassle if it would just work. Thanks, Cory

    Read the article

  • Unable to run Ajax Minifier as post-build in Visual Studio.

    - by James South
    I've set up my post build config as demonstrated at http://www.asp.net/ajaxlibrary/ajaxminquickstart.ashx I'm getting the following error though: The "JsSourceFiles" parameter is not supported by the "AjaxMin" task. Verify the parameter exists on the task, and it is a settable public instance property. My configuration settings...... <Import Project="$(MSBuildExtensionsPath)\Microsoft\MicrosoftAjax\ajaxmin.tasks" /> <Target Name="AfterBuild"> <ItemGroup> <JS Include="**\*.js" Exclude="**\*.min.js" /> </ItemGroup> <ItemGroup> <CSS Include="**\*.css" Exclude="**\*.min.css" /> </ItemGroup> <AjaxMin JsSourceFiles="@(JS)" JsSourceExtensionPattern="\.js$" JsTargetExtension=".min.js" CssSourceFiles="@(CSS)" CssSourceExtensionPattern="\.css$" CssTargetExtension=".min.css" /> </Target> I had a look at the AjaxMinTask.dll with reflector and noted that the publicly exposed properties do not match the ones in my config. There is an array of ITaskItem called SourceFiles though so I edited my configuration to match. <Import Project="$(MSBuildExtensionsPath)\Microsoft\MicrosoftAjax\ajaxmin.tasks" /> <Target Name="AfterBuild"> <ItemGroup> <JS Include="**\*.js" Exclude="**\*.min.js" /> </ItemGroup> <ItemGroup> <CSS Include="**\*.css" Exclude="**\*.min.css" /> </ItemGroup> <AjaxMin SourceFiles="@(JS);@(CSS)" SourceExtensionPattern="\.js$;\.css$" TargetExtension=".min.js;.min.css"/> </Target> I now get the error: The "SourceFiles" parameter is not supported by the "AjaxMin" task. Verify the parameter exists on the task, and it is a settable public instance property. I'm scratching my head now. Surely it should be easier than this? I'm running Visual Studio 2010 Ultimate on a Windows 7 64 bit installation.

    Read the article

  • "Illegal characters in path." Visual Studio WinForm Design View

    - by jacksonakj
    I am putting together a lightweight MVP pattern for a WinForms project. Everything compiles and runs fine. However when I attempt to open the WinForm in design mode in Visual Studio I get a "Illegal characters in path" error. My WinForm is using generics and inheriting from a base Form class. Is there a problem with using generics in a WinForm? Here is the WinForm and base Form class. public partial class TapsForm : MvpForm<TapsPresenter, TapsFormModel>, ITapsView { public TapsForm() { InitializeComponent(); } public TapsForm(TapsPresenter presenter) :base(presenter) { InitializeComponent(); UpdateModel(); } public IList<Taps> Taps { set { gridTaps.DataSource = value; } } private void UpdateModel() { Model.RideId = Int32.Parse(cboRide.Text); Model.Latitude = Double.Parse(txtLatitude.Text); Model.Longitude = Double.Parse(txtLongitude.Text); } } Base form MvpForm: public class MvpForm<TPresenter, TModel> : Form, IView where TPresenter : class, IPresenter where TModel : class, new() { private readonly TPresenter presenter; private TModel model; public MvpForm() { } public MvpForm(TPresenter presenter) { this.presenter = presenter; this.presenter.RegisterView(this); } protected override void OnLoad(EventArgs e) { base.OnLoad(e); if (presenter != null) presenter.IntializeView(); } public TModel Model { get { if (model == null) throw new InvalidOperationException("The Model property is currently null, however it should have been automatically initialized by the presenter. This most likely indicates that no presenter was bound to the control. Check your presenter bindings."); return model; } set { model = value;} } }

    Read the article

  • How to compile a C DLL for 64 bit with Visual Studio 2010?

    - by Daren Thomas
    I have a DLL written in C in source code. This is the code for the General Polygon Clipper (in case you are interested). I'm using it in a C# project via the C# wrapper provided on the homepage. This comes with a precompiled DLL. Since switching to a 64bit Development machine with Visual Studio 2010 and Windows 7 64 bit, the application won't run anymore. This is the error I get: An attempt was made to load a program with an incorrect format. This is because of DLLImporting the 32bit gpc.dll, as I have gathered from stuff found on the web. I assume this will all go away if I recompile the DLL to 64bit, but can't for the love of me figure out how to do so. My C skills are basic, in that I can write a C program with the GNU tools, but have no experience with various compilers / processors / IDEs etc. I believe I could port this to C#. By that I mean I trust myself to actually pull it off. But I'd prefer not to, since it is a lot of work that I'd prefer a compiler to do for me ;)

    Read the article

  • Why does the .NET tab in the 'Add Reference' dialog in Visual Studio not list the contents of the GA

    - by abroun
    Duplicate of: Getting assemblies to show in the .NET tab of Add Reference So, I'm using Visual C# 2008 Express Edition and I've just been on a bit of a detour as I found out that my assumption that the .NET tab of the 'Add Reference' dialog lists the contents of the GAC was incorrect. This was a bit of a problem for me as the assembly that I wanted to reference from my project was only available in the GAC. (It was Microsoft.XNA.Framework v2.0 obtained from the XNA 2.0 redistributalbe and as far as I could see it installed only into the GAC). I worked round the problem by setting the reference to Microsoft.XNA.Framework manually in the .csproj file and then getting a copy of the dll out of the cache. I was then able to create a directory for the DLL, add it to Visual Studio's list of assembly directories in the registry and then voila! I could see it in the .NET tab. This all seems like a bit of a faff to me and I don't think that my initial assumption (that the .NET tab shows the contents of the GAC) was that unreasonable or would be that uncommon. Can someone who knows more than me tell me why the contents of the GAC aren't shown? The documentation just says that they are not, but is there a good reason? is there actually a way to get the entire contents of the GAC to be listed? A tick box I've missed somewhere? Any info much appreciated.

    Read the article

  • How do I find and open a file in a Visual Studio 2005 add-in?

    - by Charles Randall
    I'm making an add-in with Visual Studio 2005 C# to help easily toggle between source and header files, as well as script files that all follow a similar naming structure. However, the directory structure has all of the files in different places, even though they are all in the same project. I've got almost all the pieces in place, but I can't figure out how to find and open a file in the solution based only on the file name alone. So I know I'm coming from, say, c:\code\project\subproject\src\blah.cpp, and I want to open c:\code\project\subproject\inc\blah.h, but I don't necessarily know where blah.h is. I could hardcode different directory paths but then the utility isn't generic enough to be robust. The solution has multiple projects, which seems to be a bit of a pain as well. I'm thinking at this point that I'll have to iterate through every project, and iterate through every project item, to see if the particular file is there, and then get a proper reference to it. But it seems to me there must be an easier way of doing this.

    Read the article

  • What to use for version control with Visual Studio 2008 for inhouse projects?

    - by Boog
    We want to put a number of our in-house projects under version control. Our projects are C# .NET applications and assemblies. We originally decided to go Microsoft all the way (as is the norm around here), and tried installing Visual Studio Team Foundation Server. To say the least, it was way more trouble of trying to get a successful install than it's worth, and I'm afraid we don't have a entire server to dedicate to TFS itself, as the installer seems to insist. We also considered a generic solution like Subversion or CVS, or possibly some kind of free online hosting that doesn't make our source publicly available under some license like Google Code appears to. Does anyone have any suggestions for us that would best fit our in-house MS environment? We'd also get some benefit out of some kind of project management tools if they were nicely integrated in to the solution, but this would only be a perk. I should also mention that we haven't entirely ruled out TFS, but it's looking like a pain, so anything you guys have to say for or against it would be helpful.

    Read the article

  • Visual Studio 2008 Unit test does not pick up code changes unless I build the entire solution

    - by Orion Edwards
    Here's the scenario: Change my code: Change my unit test for that code With the cursor inside the unit test class/method, invoke VS2008's "Run tests in current context" command The visual studio "Output" window indicates that the code dll and the test dll both successfully build (in that order) The problem is however, that the unit test does not use the latest version of the dll which it has just built. Instead, it uses the previously built dll (which doesn't have the updated code in it), so the test fails. When adding a new method, this results in a MethodNotImplementedException, and when adding a class, it results in a TypeLoadException, both because the unit test thinks the new code is there, and it isn't!. If I'm just updating an existing method, then the test just fails due to incorrect results. I can 'work around' the problem by doing this Change my code: Change my unit test for that code Invoke VS2008's 'Build Solution' command With the cursor inside the unit test class/method, invoke VS2008's "Run tests in current context" command The problem is that doing a full build solution (even though nothing has changed) takes upwards of 30 seconds, as I have approx 50 C# projects, and VS2008 is not smart enough to realize that only 2 of them need to be looked at. Having to wait 30 seconds just to change 1 line of code and re-run a unit test is abysmal. Is there anything I can do to fix this? None of my code is in the GAC or anything funny like that, it's just ordinary old dll's (buiding against .NET 3.5SP1 on a win7/64bit machine) Please help!

    Read the article

  • How do I run NUnit in debug mode from Visual Studio?

    - by Jon Cage
    I've recently been building a test framework for a bit of C# I've been working on. I have NUnit set up and a new project within my workspace to test the component. All works well if I load up my unit tests from Nunit (v2.4), but I've got to the point where it would be really useful to run in debug mode and set some break points. I've tried the suggestions from several guides which all suggest changing the 'Debug' properties of the test project: Start external program: C:\Program Files\NUnit 2.4.8\bin\nunit-console.exe Command line arguments: /assembly: <full-path-to-solution>\TestDSP\bin\Debug\TestDSP.dll I'm using the console version there, but have tried the calling the GUI as well. Both give me the same error when I try and start debugging: Cannot start test project 'TestDSP' because the project does not contain any tests. Is this because I normally load \DSP.nunit into the Nunit GUI and that's where the tests are held? I'm beginning to think the problem may be that VS wants to run it's own test framework and that's why it's failing to find the NUnit tests? [Edit] To those asking about test fixtures, one of my .cs files in the TestDSP project looks roughly like this: namespace Some.TestNamespace { // Testing framework includes using NUnit.Framework; [TestFixture] public class FirFilterTest { /// <summary> /// Tests that a FirFilter can be created /// </summary> [Test] public void Test01_ConstructorTest() { ...some tests... } } } ...I'm pretty new to C# and the Nunit test framework so it's entirely possible I've missed some crucial bit of information ;-) [FINAL SOLUTION] The big problem was the project I'd used. If you pick: Other Languages->Visual C#->Test->Test Project ...when you're choosing the project type, Visual Studio will try and use it's own testing framework as far as I can tell. You should pick a normal c# class library project instead and then the instructions in my selected answer will work.

    Read the article

  • Can I commit changes to actual database while debugging C# in Visual Studio?

    - by nathant23
    I am creating a C# application using Visual Studio that uses an SQLExpress database. When I hit f5 to debug the application and make changes to the database I believe what is happening is there is a copy of the database in the bin/debug folder that changes are being made to. However, when I stop the debugging and then hit f5 the next time a new copy of the database is being put in the bin/debug folder so that all the changes made the last time are gone. My question is: Is there a way that when I am debugging the application I can have it make changes to the actual database and those changes are actually saved or will it only make changes to the copy in the bin/debug folder (if that is what is actually happening)? I've seen similar questions, but I couldn't find an answer that said if it's possible to make those changes persistent in the actual .mdf file. The reason I ask is because as I build this application I am continuously adding pieces and testing to make sure they all work together. When I put in test data I am using actual data that I would like to stay in the database. This would just help me not have to reenter the data later. Thanks in advance for any help or information that could help me better understand the process.

    Read the article

  • How good idea is it to use code contracts in Visual Studio 2010 Professional (ie. no static checking

    - by Lasse V. Karlsen
    I create class libraries, some which are used by others around the world, and now that I'm starting to use Visual Studio 2010 I'm wondering how good idea it is for me to switch to using code contracts, instead of regular old-style if-statements. ie. instead of this: if (String.IsNullOrWhiteSpace(fileName)) throw new ArgumentNullException("fileName"); (yes, I know, if it is whitespace, it isn't strictly null) use this: Contract.Requires(!String.IsNullOrWhiteSpace(fileName)); The reason I'm asking is that I know that the static checker is not available to me, so I'm a bit nervous about some assumptions that I make, that the compiler cannot verify. This might lead to the class library not compiling for someone that downloads it, when they have the static checker. This, coupled with the fact that I cannot even reproduce the problem, would make it tiresome to fix, and I would gather that it doesn't speak volumes to the quality of my class library if it seemingly doesn't even compile out of the box. So I have a few questions: Is the static checker on by default if you have access to it? Or is there a setting I need to switch on in the class library (and since I don't have the static checker, I won't) Are my fears unwarranted? Is the above scenario a real problem? Any advice would be welcome.

    Read the article

  • Can Visual Studio (should it be able to) compute a diff between any two changesets associated with a

    - by Hamish Grubijan
    Here is my use case: I start on a project XYZ, for which I create a work item, and I make frequent check-ins, easily 10-20 in total. ALL of the code changes will be code-read and code-reviewed. The change sets are not consecutive - other people check-in in-between my changes, although they are very unlikely to touch the exact same files. So ... at the en of the project I am interested in a "total diff" - as if there was a single check-in by me to complete the entire project. In theory this is computable. From the list of change sets associated with the work item, you get the list of all files that were affected. Then, the algorithm can aggregate individual diffs over each file and combine them into one. It is possible that a pure total diff is uncomputable due to the fact that someone else renamed files, or changed stuff around very closely, or in the same functions as me. I that case ... I suppose a total diff can include those changes by non-me as well, and warn me about the fact. I would find this very useful, but I do not know how to do t in practice. Can Visual Studio 2008/2010 (and/or TFS server) do it? Are there other source control systems capable of doing this? Thanks.

    Read the article

  • How to save enum settings in Visual Studio project properties?

    - by zaidwaqi
    Hi, In the Settings tab in Visual Studio, I can see Name, Type, Scope, Value table. Define settings is intuitive if the data type is already within the Type drop-down list i.e. integer, string, long etc. But I can't find enum anywhere. How do I save enum settings then? For now, I have the following which clutter my code too much. public enum Action { LOCK = 9, FORCED_LOGOFF = 12, SHUTDOWN = 14, REBOOT, LOGOFF = FORCED_LOGOFF }; and I define Action as int in the setting. Then I have to do, switch (Properties.Settings.Default.Action) { case 9: SetAction(Action.LOCK); break; case 12: SetAction(Action.FORCED_LOGOFF); break; case 14: SetAction(Action.SHUTDOWN); break; case 15: SetAction(Action.REBOOT); break; default: SetAction(Action.LOCK); break; } Would be nice if I could simply do something like SetAction(Properties.Settings.Default.Action); to replace all above but I dont know how to save enum in setting. Hope my question is clear. Thanks.

    Read the article

  • The Windows Store... why did I sign up with this mess again?

    - by FransBouma
    Yesterday, Microsoft revealed that the Windows Store is now open to all developers in a wide range of countries and locations. For the people who think "wtf is the 'Windows Store'?", it's the central place where Windows 8 users will be able to find, download and purchase applications (or as we now have to say to not look like a computer illiterate: <accent style="Kentucky">aaaaappss</accent>) for Windows 8. As this is the store which is integrated into Windows 8, it's an interesting place for ISVs, as potential customers might very well look there first. This of course isn't true for all kinds of software, and developer tools in general aren't the kind of applications most users will download from the Windows store, but a presence there can't hurt. Now, this Windows Store hosts two kinds of applications: 'Metro-style' applications and 'Desktop' applications. The 'Metro-style' applications are applications created for the new 'Metro' UI which is present on Windows 8 desktop and Windows RT (the single color/big font fingerpaint-oriented UI). 'Desktop' applications are the applications we all run and use on Windows today. Our software are desktop applications. The Windows Store hosts all Metro-style applications locally in the store and handles the payment for these applications. This means you upload your application (sorry, 'app') to the store, jump through a lot of hoops, Microsoft verifies that your application is not violating a tremendous long list of rules and after everything is OK, it's published and hopefully you get customers and thus earn money. Money which Microsoft will pay you on a regular basis after customers buy your application. Desktop applications are not following this path however. Desktop applications aren't hosted by the Windows Store. Instead, the Windows Store more or less hosts a page with the application's information and where to get the goods. I.o.w.: it's nothing more than a product's Facebook page. Microsoft will simply redirect a visitor of the Windows Store to your website and the visitor will then use your site's system to purchase and download the application. This last bit of information is very important. So, this morning I started with fresh energy to register our company 'Solutions Design bv' at the Windows Store and our two applications, LLBLGen Pro and ORM Profiler. First I went to the Windows Store dashboard page. If you don't have an account, you have to log in or sign up if you don't have a live account. I signed in with my live account. After that, it greeted me with a page where I had to fill in a code which was mailed to me. My local mail server polls every several minutes for email so I had to kick it to get it immediately. I grabbed the code from the email and I was presented with a multi-step process to register myself as a company or as an individual. In red I was warned that this choice was permanent and not changeable. I chuckled: Microsoft apparently stores its data on paper, not in digital form. I chose 'company' and was presented with a lengthy form to fill out. On the form there were two strange remarks: Per company there can just be 1 (one, uno, not zero, not two or more) registered developer, and only that developer is able to upload stuff to the store. I have no idea how this works with large companies, oh the overhead nightmares... "Sorry, but John, our registered developer with the Windows Store is on holiday for 3 months, backpacking through Australia, no, he's not reachable at this point. M'yeah, sorry bud. Hey, did you fill in those TPS reports yesterday?" A separate Approver has to be specified, which has to be a different person than the registered developer. Apparently to Microsoft a company with just 1 person is not a company. Luckily we're with two people! *pfew*, dodged that one, otherwise I would be stuck forever: the choice I already made was not reversible! After I had filled out the form and it was all well and good and accepted by the Microsoft lackey who had to write it all down in some paper notebook ("Hey, be warned! It's a permanent choice! Written down in ink, can't be changed!"), I was presented with the question how I wanted to pay for all this. "Pay for what?" I wondered. Must be the paper they were scribbling the information on, I concluded. After all, there's a financial crisis going on! How could I forget! Silly me. "Ok fair enough". The price was 75 Euros, not the end of the world. I could only pay by credit card, so it was accepted quickly. Or so I thought. You see, Microsoft has a different idea about CC payments. In the normal world, you type in your CC number, some date, a name and a security code and that's it. But Microsoft wants to verify this even more. They want to make a verification purchase of a very small amount and are doing that with a special code in the description. You then have to type in that code in a special form in the Windows Store dashboard and after that you're verified. Of course they'll refund the small amount they pull from your card. Sounds simple, right? Well... no. The problem starts with the fact that I can't see the CC activity on some website: I have a bank issued CC card. I get the CC activity once a month on a piece of paper sent to me. The bank's online website doesn't show them. So it's possible I have to wait for this code till October 12th. One month. "So what, I'm not going to use it anyway, Desktop applications don't use the payment system", I thought. "Haha, you're so naive, dear developer!" Microsoft won't allow you to publish any applications till this verification is done. So no application publishing for a month. Wouldn't it be nice if things were, you know, digital, so things got done instantly? But of course, that lackey who scribbled everything in the Big Windows Store Registration Book isn't that quick. Can't blame him though. He's just doing his job. Now, after the payment was done, I was presented with a page which tells me Microsoft is going to use a third party company called 'Symantec', which will verify my identity again. The page explains to me that this could be done through email or phone and that they'll contact the Approver to verify my identity. "Phone?", I thought... that's a little drastic for a developer account to publish a single page of information about an external hosted software product, isn't it? On Facebook I just added a page, done. And paying you, Microsoft, took less information: you were happy to take my money before my identity was even 'verified' by this 3rd party's minions! "Double standards!", I roared. No-one cared. But it's the thought of getting it off your chest, you know. Luckily for me, everyone at Symantec was asleep when I was registering so they went for the fallback option in case phone calls were not possible: my Approver received an email. Imagine you have to explain the idiot web of security theater I was caught in to someone else who then has to reply a random person over the internet that I indeed was who I said I was. As she's a true sweetheart, she gave me the benefit of the doubt and assured that for now, I was who I said I was. Remember, this is for a desktop application, which is only a link to a website, some pictures and a piece of text. No file hosting, no payment processing, nothing, just a single page. Yeah, I also thought I was crazy. But we're not at the end of this quest yet. I clicked around in the confusing menus of the Windows Store dashboard and found the 'Desktop' section. I get a helpful screen with a warning in red that it can't find any certified 'apps'. True, I'm just getting started, buddy. I see a link: "Check the Windows apps you submitted for certification". Well, I haven't submitted anything, but let's see where it brings me. Oh the thrill of adventure! I click the link and I end up on this site: the hardware/desktop dashboard account registration. "Erm... but I just registered...", I mumbled to no-one in particular. Apparently for desktop registration / verification I have to register again, it tells me. But not only that, the desktop application has to be signed with a certificate. And not just some random el-cheapo certificate you can get at any mall's discount store. No, this certificate is special. It's precious. This certificate, the 'Microsoft Authenticode' Digital Certificate, is the only certificate that's acceptable, and jolly, it can be purchased from VeriSign for the price of only ... $99.-, but be quick, because this is a limited time offer! After that it's, I kid you not, $499.-. 500 dollars for a certificate to sign an executable. But, I do feel special, I got a special price. Only for me! I'm glowing. Not for long though. Here I started to wonder, what the benefit of it all was. I now again had to pay money for a shiny certificate which will add 'Solutions Design bv' to our installer as the publisher instead of 'unknown', while our customers download the file from our website. Not only that, but this was all about a Desktop application, which wasn't hosted by Microsoft. They only link to it. And make no mistake. These prices aren't single payments. Every year these have to be renewed. Like a membership of an exclusive club: you're special and privileged, but only if you cough up the dough. To give you an example how silly this all is: I added LLBLGen Pro and ORM Profiler to the Visual Studio Gallery some time ago. It's the same thing: it's a central place where one can find software which adds to / extends / works with Visual Studio. I could simply create the pages, add the information and they show up inside Visual Studio. No files are hosted at Microsoft, they're downloaded from our website. Exactly the same system. As I have to wait for the CC transcripts to arrive anyway, I can't proceed with publishing in this new shiny store. After the verification is complete I have to wait for verification of my software by Microsoft. Even Desktop applications need to be verified using a long list of rules which are mainly focused on Metro-style applications. Even while they're not hosted by Microsoft. I wonder what they'll find. "Your application wasn't approved. It violates rule 14 X sub D: it provides more value than our own competing framework". While I was writing this post, I tried to check something in the Windows Store Dashboard, to see whether I remembered it correctly. I was presented again with the question, after logging in with my live account, to enter the code that was just mailed to me. Not the previous code, a brand new one. Again I had to kick my mail server to pull the email to proceed. This was it. This 'experience' is so beyond miserable, I'm afraid I have to say goodbye for now to the 'Windows Store'. It's simply not worth my time. Now, about live accounts. You might know this: live accounts are tied to everything you do with Microsoft. So if you have an MSDN subscription, e.g. the one which costs over $5000.-, it's tied to this same live account. But the fun thing is, you can login with your live account to the MSDN subscriptions with just the account id and password. No additional code is mailed to you. While it gives you access to all Microsoft software available, including your licenses. Why the draconian security theater with this Windows Store, while all I want is to publish some desktop applications while on other Microsoft sites it's OK to simply sign in with your live account: no codes needed, no verification and no certificates? Microsoft, one thing you need with this store and that's: apps. Apps, apps, apps, apps, aaaaaaaaapps. Sorry, my bad, got carried away. I just can't stand the word 'app'. This store's shelves have to be filled to the brim with goods. But instead of being welcomed into the store with open arms, I have to fight an uphill battle with an endless list of rules and bullshit to earn the privilege to publish in this shiny store. As if I have to be thrilled to be one of the exclusive club called 'Windows Store Publishers'. As if Microsoft doesn't want it to succeed. Craig Stuntz sent me a link to an old blog post of his regarding code signing and uploading to Microsoft's old mobile store from back in the WinMo5 days: http://blogs.teamb.com/craigstuntz/2006/10/11/28357/. Good read and good background info about how little things changed over the years. I hope this helps Microsoft make things more clearer and smoother and also helps ISVs with their decision whether to go with the Windows Store scheme or ignore it. For now, I don't see the advantage of publishing there, especially not with the nonsense rules Microsoft cooked up. Perhaps it changes in the future, who knows.

    Read the article

  • How can I prevent external MSBuild files from being cached (by Visual Studio) during a project build

    - by Damian Powell
    I have a project in my solution which started life as a C# library project. It's got nothing of any interest in it in terms of code, it is merely used as a dependency in the other projects in my solution in order to ensure that it is built first. One of the side-effects of building this project is that a shared AssemblyInfo.cs is created which contains the version number in use by the other projects. I have done this by adding the following to the .csproj file: <ItemGroup> <None Include="Properties\AssemblyInfo.Shared.cs.in" /> <Compile Include="Properties\AssemblyInfo.Shared.cs" /> <None Include="VersionInfo.targets" /> </ItemGroup> <Import Project="$(ProjectDir)VersionInfo.targets" /> <Target Name="BeforeBuild" DependsOnTargets="UpdateSharedAssemblyInfo" /> The referenced file, VersionInfo.targets, contains the following: <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <!-- Some properties defining tool locations and the name of the AssemblyInfo.Shared.cs.in file etc. --> </PropertyGroup> <Target Name="UpdateSharedAssemblyInfo"> <!-- Uses the Exec task to run one of the tools to generate AssemblyInfo.Shared.cs based on the location of AssemblyInfo.Shared.cs.in and some of the other properties. --> </Target> </Project> The contents of the VersionInfo.targets file could simply be embedded within the .csproj file but it is external because I am trying to turn all of this into a project template. I want the users of the template to be able to add the new project to the solution, edit the VersionInfo.targets file, and run the build. The problem is that modifying and saving the VersionInfo.targets file and rebuilding the solution has no effect - the project file uses the values from the .targets file as they were when the project was opened. Even unloading and reloading the project has no effect. In order to get the new values, I need to close Visual Studio and reopen it (or reload the solution). How can I set this up so that the configuration is external to the .csproj file and not cached between builds?

    Read the article

  • Deploy ASP.NET Web Applications with Web Deployment Projects

    - by Ben Griswold
    One may quickly build and deploy an ASP.NET web application via the Publish option in Visual Studio.  This option works great for most simple deployment scenarios but it won’t always cut it.  Let’s say you need to automate your deployments. Or you have environment-specific configuration settings. Or you need to execute pre/post build operations when you do your builds.  If so, you should consider using Web Deployment Projects. The Web Deployment Project type doesn’t come out-of-the-box with Visual Studio 2008.  You’ll need to Download Visual Studio® 2008 Web Deployment Projects – RTW and install if you want to follow along with this tutorial. I’ve created a shiny new ASP.NET MVC project.  Web Deployment Projects work with websites, web applications and MVC projects so feel free to go with any web project type you’d like.  Once your web application is in place, it’s time to add the Web Deployment project.  You can hunt and peck around the File > New > New Project… dialogue as long as you’d like, but you aren’t going to find what you need.  Instead, select the web project and then choose the “Add Web Deployment Project…” hiding behind the Build menu option. I prefer to name my projects based on the environment in which I plan to deploy.  In this case, I’ll be rolling to the QA machine. Don’t expect too much to happen at this point.  A seemingly empty project with a funny icon will be added to your solution.  That’s it. I want to take a minute and talk about configuration settings before we continue.  Some of the common settings which might change from environment to environment are appSettings, connectionStrings and mailSettings.  Here’s a look at my updated web.config: <appSettings>   <add key="MvcApplication293.Url" value="http://localhost:50596/" />     </appSettings> <connectionStrings>   <add name="ApplicationServices"        connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"        providerName="System.Data.SqlClient"/> </connectionStrings>   <system.net>   <mailSettings>     <smtp from="[email protected]">         <network host="server.com" userName="username" password="password" port="587" defaultCredentials="false"/>     </smtp>   </mailSettings> </system.net> I want to update these values prior to deploying to the QA environment.  There are variations to this approach, but I like to maintain environment-specific settings for each of the web.config sections in the Config/[Environment] project folders.  I’ve provided a screenshot of the QA environment settings below. It may be obvious what one should include in each of the three files.  Basically, it is a copy of the associated web.config section with updated setting values.  For example, the AppSettings.config file may include a reference to the QA web url, the DB.config would include the QA database server and login information and the StmpSettings.config would include a QA Stmp server and user information. <?xml version="1.0" encoding="utf-8" ?> <appSettings>   <add key="MvcApplication293.Url" value="http://qa.MvcApplicatinon293.com/" /> </appSettings> AppSettings.config  <?xml version="1.0" encoding="utf-8" ?> <connectionStrings>   <add name="ApplicationServices"        connectionString="server=QAServer;integrated security=SSPI;database=MvcApplication293"        providerName="System.Data.SqlClient"/>   </connectionStrings> Db.config  <?xml version="1.0" encoding="utf-8" ?> <smtp from="[email protected]">     <network host="qaserver.com" userName="qausername" password="qapassword" port="587" defaultCredentials="false"/> </smtp> SmtpSettings.config  I think our web project is ready to deploy.  Now, it’s time to concentrate on the Web Deployment Project itself.  Right-click on the project file and open the Property Pages. The first thing to call out is the Configuration dropdown.  I only deploy a project which is built in Release Mode so I only setup the Web Deployment Project for this mode.  (This is when you change the Configuration selection to “Release.”)  I typically keep the Output Folder default value – .\Release\.  When the application is built, all artifacts will be dropped in the .\Release\ folder relative to the Web Deployment Project root.  The final option may be up for some debate.  I like to roll out updatable websites so I select the “Allow this precompiled site to be updatable” option.  I really do like to follow standard SDLC processes when I release my software but there are those times when you just have to make a hotfix to production and I like to keep this option open if need be.  If you are strongly opposed to this idea, please, by all means, don’t check the box. The next tab is boring.  I don’t like to deploy a crazy number of DLLs so I merge all outputs to a single assembly.  Again, you may have another option and feel free to change this selection if you so wish. If you follow my lead, take care when choosing a single assembly name.  The Assembly Name can not be the same as the website or any other project in your solution otherwise you’ll receive a circular reference build error.  In other words, I can’t name the assembly MvcApplication293 or my output window would start yelling at me. Remember when we called out our QA configuration files?  Click on the Deployment tab and you’ll see how where going to use them.  Notice the Web.config file section replacements value.  All this does is swap called out web.config sections with the content of the Config\QA\* files.  You can reduce or extend this list as you deem fit.  Did you see the “Use external configuration source file” option?  You know how you can point any of your web.config sections to an external file via the configSource attribute?  This option allows you to leverage that technique and instead of replacing the content of the sections, you will replace the configSource attribute value instead. <appSettings configSource="Config\QA\AppSettings.config" /> Go ahead and Apply your changes.  I’d like to take a look at the project file we just updated.  Right-click on the Web Deployment Project and select “Open Project File.” One of the first configuration blocks reflects core Release build settings.  There are a couple of points I’d like to call out here: DebugSymbols=false ensures the compilation debug attribute in your web.config is flipped to false as part of build process.  There’s some crumby (more likely old) documentation which implies you need a ToggleDebugCompilation task to make this happen.  Nope. Just make sure the DebugSymbols is set to false.  EnableUpdateable implies a single dll for the web application rather than a dll for each object and and empty view file. I think updatable applications are cleaner and include the benefit (or risk based on your perspective) that portions of the application can be updated directly on the server.  I called this out earlier but I wanted to reiterate. <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">     <DebugSymbols>false</DebugSymbols>     <OutputPath>.\Release</OutputPath>     <EnableUpdateable>true</EnableUpdateable>     <UseMerge>true</UseMerge>     <SingleAssemblyName>MvcApplication293</SingleAssemblyName>     <DeleteAppCodeCompiledFiles>true</DeleteAppCodeCompiledFiles>     <UseWebConfigReplacement>true</UseWebConfigReplacement>     <ValidateWebConfigReplacement>true</ValidateWebConfigReplacement>     <DeleteAppDataFolder>true</DeleteAppDataFolder>   </PropertyGroup> The next section is self-explanatory.  The content merely reflects the replacement value you provided via the Property Pages. <ItemGroup Condition="'$(Configuration)|$(Platform)' == 'Release|AnyCPU'">     <WebConfigReplacementFiles Include="Config\QA\AppSettings.config">       <Section>appSettings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\Db.config">       <Section>connectionStrings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\SmtpSettings.config">       <Section>system.net/mailSettings/smtp</Section>     </WebConfigReplacementFiles>   </ItemGroup> You’ll want to extend the ItemGroup section to include the files you wish to exclude from the build.  The sample ExcludeFromBuild nodes exclude all obj, svn, csproj, user, pdb artifacts from the build. Enough though they files aren’t included in your web project, you’ll need to exclude them or they’ll show up along with required deployment artifacts.  <ItemGroup Condition="'$(Configuration)|$(Platform)' == 'Release|AnyCPU'">     <WebConfigReplacementFiles Include="Config\QA\AppSettings.config">       <Section>appSettings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\Db.config">       <Section>connectionStrings</Section>     </WebConfigReplacementFiles>     <WebConfigReplacementFiles Include="Config\QA\SmtpSettings.config">       <Section>system.net/mailSettings/smtp</Section>     </WebConfigReplacementFiles>     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\obj\**\*.*" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\.svn\**\*.*" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\.svn\**\*" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\*.csproj" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\**\*.user" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\bin\*.pdb" />     <ExcludeFromBuild Include="$(SourceWebPhysicalPath)\Notes.txt" />   </ItemGroup> Pre/post build and Pre/post merge tasks are added to the final code block.  By default, your project file should look like the following – a completely commented out section. <!– To modify your build process, add your task inside one of        the targets below and uncomment it. Other similar extension        points exist, see Microsoft.WebDeployment.targets.   <Target Name="BeforeBuild">   </Target>   <Target Name="BeforeMerge">   </Target>   <Target Name="AfterMerge">   </Target>   <Target Name="AfterBuild">   </Target>   –> Update the section to remove all temporary Config folders and files after the build.  <!– To modify your build process, add your task inside one of        the targets below and uncomment it. Other similar extension        points exist, see Microsoft.WebDeployment.targets.     <Target Name="BeforeMerge">   </Target>   <Target Name="AfterMerge">   </Target>     <Target Name="BeforeBuild">      </Target>       –>   <Target Name="AfterBuild">     <!– WebConfigReplacement requires the Config files. Remove after build. –>     <RemoveDir Directories="$(OutputPath)\Config" />   </Target> That’s it for setup.  Save the project file, flip the solution to Release Mode and build.  If there’s an issue, consult the Output window for details.  If all went well, you will find your deployment artifacts in your Web Deployment Project folder like so. Both the code source and published application will be there. Inside the Release folder you will find your “published files” and you’ll notice the Config folder is no where to be found.  In the Source folder, all project files are found with the exception of the items which were excluded from the build. I’ll wrap up this tutorial by calling out a little Web Deployment pet peeve of mine: there doesn’t appear to be a way to add an existing web deployment project to a solution.  The best I can come up with is create a new web deployment project and then copy and paste the contents of the existing project file into the new project file.  It’s not a big deal but it bugs me. Download the Solution

    Read the article

  • TFS 2010 and the missing Area & Iterations (stale data) Issue

    - by andresv
    The symptom is this: you change some area or iteration in a TFS Project, but the change is not reflected (or updated) in VS or any other TFS Client. Well, it happens that TFS now has some clever caching mechanisms that need to be updated when you make a change like this, and those changes are propagated by some scheduled jobs TFS is continuously running in the Application Tier.  So, you you get this behavior, please check (and possibly restart) the "Visual Studio Team Foundation Background Job Agent" service. In my case, this service was logging a very odd "Object Reference Not Set" into the Windows Event Log, and a simple restart fixed it. Hope this is fixed by RTM...   (we are using the RC version). And by the way, if the job agent is broken there are some other things that stops working like email notifications. Best regards, Andrés G Vettori, CTO, VMBC  

    Read the article

  • SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

    - by WarpKid
    Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

    Read the article

  • Multiple file upload with asp.net 4.5 and Visual Studio 2012

    - by Jalpesh P. Vadgama
    This post will be part of Visual Studio 2012 feature series. In earlier version of ASP.NET there is no way to upload multiple files at same time. We need to use third party control or we need to create custom control for that. But with asp.net 4.5 now its possible to upload multiple file with file upload control. With ASP.NET 4.5 version Microsoft has enhanced file upload control to support HTML5 multiple attribute. There is a property called ‘AllowedMultiple’ to support that attribute and with that you can easily upload the file. So what we are waiting for!! It’s time to create one example. On the default.aspx file I have written following. <asp:FileUpload ID="multipleFile" runat="server" AllowMultiple="true" /> <asp:Button ID="uploadFile" runat="server" Text="Upload files" onclick="uploadFile_Click"/> Here you can see that I have given file upload control id as multipleFile and I have set AllowMultiple file to true. I have also taken one button for uploading file.For this example I am going to upload file in images folder. As you can see I have also attached event handler for button’s click event. So it’s time to write server side code for this. Following code is for the server side. protected void uploadFile_Click(object sender, EventArgs e) { if (multipleFile.HasFiles) { foreach(HttpPostedFile uploadedFile in multipleFile.PostedFiles) { uploadedFile.SaveAs(System.IO.Path.Combine(Server.MapPath("~/Images/"),uploadedFile.FileName)); Response.Write("File uploaded successfully"); } } } Here in the above code you can see that I have checked whether multiple file upload control has multiple files or not and then I have save that in Images folder of web application. Once you run the application in browser it will look like following. I have selected two files. Once I have selected and clicked on upload file button it will give message like following. As you can see now it has successfully upload file and you can see in windows explorer like following. As you can see it’s very easy to upload multiple file in ASP.NET 4.5. Stay tuned for more. Till then happy programming. P.S.: This feature is only supported in browser who support HTML5 multiple file upload. For other browsers it will work like normal file upload control in asp.net.

    Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >