Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 153/421 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160 | Next Page >

OpenSolaris with no gcc vs. Nexenta with no ext3

- by Jake Wharton

I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

Read the article
Ports do not open after rules appended in iptables

- by user2699451

I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

Read the article
One bigger Virtual Machine distributed across many OpenStack nodes [duplicate]

- by flyer

This question already has an answer here: Can a virtualized machine have the CPU and RAM resources of multiple underlying physical machines? 2 answers I just setup virtual machines on one hardware with Vagrant. I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with Linux? ------------------------------- | VM with OS | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | Node | Node | Node | ------------------------------- More details: In my environment Nodes are just virtual machines, but my question concerns separate Hardware nodes. If we imagine this Nodes(Novas) are placed on a separate machines (e.g. every has 4 cores) can I run one Virtual Machine across many OpenStack Nodes? Is it possible to aggregate the computation power of OpenStack in one virtual distributed operating system?

Read the article
OS X Dual Boot Snow Leopard and Windows

- by Abhishek

Am I able to install Mac OS X Snow Leopard on an x86 certified Apple hardware computer and then dual boot with Windows 7?

Read the article
Easy Transfer from a dead computer

- by Nathan DeWitt

I had a computer that electrocuted me and the company sent me a new one. The hard drive from the old computer works fine and is in my new computer. I would like to transfer my files from the old drive to the new one, preferably using Easy Transfer (old & new computers were Win7). When I go through the Easy Transfer wizard, it assumes my old computer is running and that I can run a process to backup all my data to a single file. However, in my case I have the system drive in my new computer and want to pull the data off it. I would like to avoid rebooting the old computer, to avoid damage to myself or my data. I would like to avoid booting into the old system drive, as my new hardware is significantly different and I imagine I'll run into some missing hardware issues. What's the easiest way to get my data off this drive?

Read the article
How do I Connect a 30yr-old Tandy 1400LT laptop to the internet?

- by Clemens Bergmann

Just for the fun of it, I want to get an old Tandy 1400LT laptop: small monochrome display two floppy drives rs-232c connector "printer" connector connect the thing the internet and use it as an ssh terminal. How would I connect it to the internet? The software should be no problem as it is a 386 hardware. There should be a small linux distribution which can be run on it. But how would I phisically connect the hardware? It has no ethernet port. Has someone experience with Serial/Paralel-to-ethernet converters?

Read the article
Dual-bootable Virtual Machine

- by ojrac

My work computer is a Linux desktop with a Windows 7 virtual machine for Visual Studio and IE testing. I'm very picky, and I don't want to configure two Windows installs... but I can't think of a way to do this without running afoul of Windows activation. I've already set up VirtualBox to run my VM off a physical hard drive, and grub isn't too hard to configure. But it'd be a waste of time without solving the activation problem. Is there any way I can boot into a single install of Windows as a virtual machine and on actual hardware without having to reactivate (until I'm eventually flagged as a pirate) every time I switch between the two? Is there any MS-endorsed way to use a single installed license with two sets of hardware?

Read the article
Fix for OpenSolaris with no gcc vs. Nexenta with no ext3

- by Jake Wharton

I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

Read the article
Monitoring remote laptops

- by kaerast

We're looking for something to monitor around 30 remote laptops that are constantly out on the road, never returning to base except for when there are serious hardware faults that need repairing. These laptops won't always be connected to the internet, they'll have mobile broadband and may work offline most of the time. They will be running a mixture of Windows XP, Vista and 7 and there is currently no server setup. We're primarily interested in making sure that Windows Updates and antivirus updates are happening, and I guess we should also be monitoring remaining disk space, what software is installed and ideally hardware health. It might also be nice if we could gain remote access to perform work on them. My main reason for wanting to monitor them is that it's going to be a real pain to get them back to base if anything goes wrong, so I want to be proactive in ensuring they last as long as possible. Can you recommend what I should be monitoring to ensure a long life? What tools would you use to monitor and maintain these computers?

Read the article
Can I connect Creative SBS A520 5.1 speakers to my Dell XPS L502X?

- by vr3690

I am planning on buying a new set of speakers and was looking at the Creative SBS A520 5.1 Speakers as an option to connect to my Dell XPS 502X. From what I have seen online and on the quick start guide for the speakers, I need to have 3 line out ports on my laptop to use the 5.1 speakers properly. Right now, I have port for 3.5mm jack, one S/P Diff and another for the mic. Can I connect these speakers directly to my laptop without using any other hardware? If I do need some other hardware, what do I need to get?

Read the article
Custom built machine has much higher power consumption than expected

- by foraidt

I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

Read the article
How can I install an Apple Magic Trackpad on a PC without Boot Camp?

- by rymo

I have a Apple Magic Trackpad and I'd like to use it with my PC. I have no other Apple hardware besides the Trackpad. I do not have OSX and thus no Boot Camp CD. The Trackpad uses Bluetooth and will pair with Windows 7 without specific drivers (appears as an HID-Compliant Mouse), but all it will do is point and left click (physical click, no touch tap). With Apple's Windows driver update, I should be able to achieve: Tap to click Dragging Drag lock Secondary click Two-finger scrolling Two-finger secondary tap/click But how can I obtain this driver without Boot Camp installed? Apple's Boot Camp update EXE will not install on my PC (non-Apple hardware).

Read the article
IBM BladeServer Chassis compatibility

- by Matt

Hi, I'm looking at buying a 3 year old blade server. My question is, if I buy it and want to insert a current model blade, will it fit? Also, if the chassis goes "POP" and I need to replace it, will the current model chassis fit 3 year old blades? What about Power supply replacements? The chassis I'm looking at is this: IBM FRU / PN: M8677-3XM with DVD reader The blades are all IBM HS20's. We've had a good run with IBM hardware and although there is some nice ex-lease HP hardware available, my understanding is that backwards comparability is not so well maintained. Is this true?

Read the article
Video compression artifacts in Flash

- by lvanderhart

This only started happening in the past two days, which seems very odd to me. Everything worked flawlessly up until now, and I use my my computer as my primary TV. Flash video from Hulu and Amazon, for no apparent reason, now have lots of artifacts in them. Some scenes are ok, but some are completely scrambled and unwatchable. My connection is a 15mb fios, and bandwidth tests indicate my connection speed is ok. I've tried the latest production version of Flash, as well as the 10.1RC4. Same problem. Enabling or disabling hardware acceleration in Flash makes no difference (with the scrambling issue, quality is better overall with hardware). Using a different H264 codec doesn't clean up the issue, although the scrambling does look different. I'm kind of stumped. The only thing I can think of now is to reinstall windows, which is obviously a drastic step. Edit: Forgot to say: Windows 7, Athlon 64X2, Geforce GTS 250

Read the article
What is ECFirmwareMajorRelease in registry?

- by Remus Rigo

Can anyone tell me what ECFirmwareMajorRelease stands for? The key can be found in the registry at HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\BIOS

Read the article
Setup dhcpd without gateway on purpose

- by MBober

I have an XP machine with two network interfaces. One is connected to my company's network (and the Internet). The other is a very local network which connects some hardware with my PC. Both the hardware and my XP machine's second network interface obtain configuration from a dhcpd running on Ubuntu in a virtual machine on my XP machine. I entered some dummy gateway in /etc/dhcp3/dhcpd.conf like 192.168.3.1 which does not match any existing device just to get dhcpd started. The problem is that my XP machine now tries to route Internet traffic through 192.168.3.1 in most of the cases which, of course, results in an error. Is there any way to set up dhcpd in a way that the clients know that there is no gateway in this network? By the way: setting the gateway manually in XP is off the table because this needs administrator privileges which I don't have.

Read the article
Can I use dmraid instead of md (mdadm) to make software RAID-1 and RAID-1+0 volumes?

- by Don MacAskill

On a related question about SSDs and TRIM (see: Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux? ), it turns out that dmraid may now (or shortly) support TRIM on RAID-1. Typically, we've used md (via mdadm) to create our RAID-1 volumes, then used LVM to create volume groups, then formatted with the file system of our choice (ext4 lately). We've been doing this for years, and Google & ServerFault searches seem to confirm this is the most common way of doing software RAID with volume management. Google searches seem to suggest that dmraid is use for so-called 'fakeRAID' configurations where there's some level of hardware 'help' in the form of RAID BIOS in the controller, which we don't have (and don't want to use - we'd like a fully software solution). Since we'd like to use TRIM on our SSDs, and since md doesn't seem to (yet?) support TRIM, I'm wondering if it's possible to use dmraid instead of md to create RAID-1 (and RAID-1+0) volumes in software, with no hardware support (ie, just plugged into a dumb SATA/SAS bus)?

Read the article
Windows 7 randomly installs an "Unknown Device"

- by Amazed

Rarely (several days to weeks between occurrences,) and seemingly at random, I get a balloon notification from Windows 7 (x64 SP1 Home Premium) that it is installing hardware for me. However, no new hardware has been installed or plugged in! When I click the balloon it doesn't give me any useful information: Looking in the event log, I find this entry: Event ID: 20001 Source: UserPnp Task Category: 7005 Message: Driver Management concluded the process to install driver FileRepository\usb.inf_amd64_neutral_153b489118ee37b8\usb.inf for Device Instance ID USB\VID_0000&PID_0000\6&3AF9A177&0&0060&&02 with the following status: 0x0. It appears to be USB related. My motherboard has both USB 2.0 and 3.0 controllers. My keyboard and mouse are plugged into the 2.0 slots and the data/recharge cable for a tablet (but not the tablet itself) was plugged in to the 3.0 slot. No other USB devices have been attached for several days/reboots. Why is Windows doing this?

Read the article
What virtual machine software for fail-over and snapshots?

- by consolibyte

We're looking to virtualize a few machines with the hope that we can: a) Take "snapshots" of a machine to use as backups b) Implement a system where if the software/hardware fails, we can quickly and easily load up an recent snapshot on new hardware and replace the failed machine with a new one. As always, cost is a concern- there's only 3 or 4 servers we're going to do this with, so we don't want to drop $50,000 on this. I'm confused by all of the different virtual machine offerings. Which one is does what I want, and does it easily?

Read the article
Determining Performance Limits

- by JeffV

I have a number of windows processes that pass messages between them hat a high rate using tcp to local host. Aside from testing on actual hardware how can I assess what my hardware limit will be. These applications are not doing CPU intensive work, mostly decomposing and combining messages, scanning over them for special flag in the data etc.. The message size is typically 3k and the rate is typically ~10k messages per second. ~30MB per second between processing stages. There may be 10 or more stages depending. For this type of application, what should I look to for assessing performance? What do I look for in a server performance wise? I am currently running an XEON L5408 with 32 GB ram. But I am assuming cache is more important than actual ram size as I am barely touching the ram.

Read the article
Beginners advice on Small business network disk(s)

- by Rob

We are having 10 PCs used by various user and presently use one network disk (a LaCie NAS) for all our data. Everything is Windows Vista and our collective IT hardware knowledge is minimal. This worked well generally. However, recently the disk freqently loses connection from the network (2-3 times per week) and the only way back seems to be the "turn it off and back on" trick. This obviously cant be any good for the disk. I understand that there are various more sophisticated ways of storing data and was wondering what people would recommend. One of the worries is obviously disk failure (either in part or as a whole) and the lack of continued availability due to network issues. I would guess that a disk which replicates data wouldnt work as a sole solution due to the network connection, but dont know what hardware (and/or software) would/could work in our case. In terms of size, we are looking at very small amounts, ie. less than 500 GB in total.

Read the article
how insecure is my short password really?

- by rika-uehara

Using systems like TrueCrypt, when I have to define a new password I am often informed that using a short password is insecure and "very easy" to break by brute-force. I always use passwords of 8 characters in length, which are not based on dictionary words, which consists of characters from the set A-Z, a-z, 0-9 I.e. I use password like sDvE98f1 How easy is it to crack such a password by brute-force? I.e. how fast. I know it heavily depends on the hardware but maybe someone could give me an estimate how long it would take to do this on a dual core with 2GHZ or whatever to have a frame of reference for the hardware. To briute-force attack such a password one needs not only to cycle through all combinations but also try to de-crypt with each guessed password which also needs some time. Also, is there some software to brute-force hack truecrypt because I want to try to brute-force crack my own passsword to see how long it takes if it is really that "very easy".

Read the article
Windows 7 Locking up Randomly

- by Michael Moore

I've got a Windows 7 machine that is locking up randomly. It can be in the first thirty seconds, or it can be hours later. There is nothing specific I can find that is running when it happens. When it locks, the screen doesn't change, but nothing moves. The waiting icon stops, the mouse stops, keyboard doesn't work, etc. I've even tried the crash on ctrl-scrl registry hack, and it won't even dump the kernel. I've run hardware diagnostics on the RAM and it doesn't find any problems. I would think it is a hardware issue, but on this exact same machine, I can run 64 Bit Ubuntu and it has zero problems. I've even tried reinstalling Windows7 from scratch, and it still happens. Anyone have any ideas? Any good diagnostic tools to recommend? Thanks! Michael

Read the article
Best RAID setup for multimedia fileserver?

- by Mr. Schwabe

I'm building a fileserver for my small office. We do film and multimedia design. Only 3 clients connected. The server is primarily for local access to graphic assets and video files. I'm looking for advice on hardware and software required. Particularly for the RAID. I have the following objectives: A) merged capacity I'd like all other systems to access the data as a single mapped network drive that has an initial capacity of 10 TB. So perhaps 5x 2TB drives (plus mirror drives for redundancy). B) easy way to increase capacity Thinking long term, I'd like to 'easily' add more drives to the array for a potential two or three fold increase in capacity. So theoretically it could get upto a 30 TB raid array consisting of maybe 15x 2 TB drives of capacity (plus mirror drives for redundancy). C) maximum fault tolerance I want at least 1 mirror drive per capacity drive (in laymen's terms). So if I start with 10 TB / 5x 2TB of capacity, I suppose I would need another another 5x 2TB drives to be mirrors. So 10 drives total. But I'd also like potential for even more redundancy; with upto 2 additional mirrors per 'capacity drive' (and to be able to add them to the array anytime with ease). D) easy way to monitor drive health I'd like an intuitive interface for managing the raid and monitoring drive health The other systems accessing this network drive will be running Windows, but also the odd Ubuntu and MacOS system as well. Are these objectives attainable? What type of RAID setup do you recommend? What hardware will be required? Also what OS do you think this system should be running? Does it really matter? I'm no network admin - just a long time Windoze user, without much Linux experience. That said, I'm not opposed to a Linux solution if it's easy enough and more practical than a Windows OS for this server. Or maybe something such as Openfiler. Budget should hit the sweet spot for value and performance (hence my preference to use 2TB drives). The biggest focus is storage; aside from that the system just needs to keep the drives running optimally with perhaps 2 or 3 clients accessing / writing files at any given time. The hardware quote would start with something like 10x 2TB WD Caviar Blacks; about $1900 for the storage + $x for remaining parts. http://ncix.com/products/index.php?sku=42775&vpn=WD2001FASS&manufacture=Western%20Digital%20WD Your advice is appreciated, thanks!

Read the article
Limit disk I/O one program creates?

- by Posipiet

Hardware: one virtualization server. Dual Nehalem, 24GB RAM, 2 TB mirrored HD. Software: Debian, KVM, virt-manager on the server with several virtual machines that use Linux too. 2 TB Disk is a big LVM, each VM gets a logical volume and makes its own partitions in that. Problem: One of the programs that runs on one of the VMs creates huge disk load. This never was an issue, because the program never ran on such a powerful hardware. Now the CPUs are fast, and lots of I/O is the result. We cant do much against that at the moment, because the tool is a black box. On the other hand, the speedy computation is welcome. The program creates about 5 GB of temp files which get overwritten during the next iteration. Question: How can we limit the disk I/O for the process?

Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160 | Next Page >