Search Results

Search found 16987 results on 680 pages for 'second'.

Page 153/680 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

  • Mac Pro Boot Camp w/ RAID card

    - by churnd
    If I configure a Mac Pro with a RAID card and two 15k RPM drives, and leave the drives JBOD (no RAID configured), can I install Windows on the second drive? I guess the question really is, does Windows recognize the RAID card? I know it's probably just a rebadged LSI or Adaptec but wanted to see if anyone's actually done it...

    Read the article

  • Problem with USB drivers (Windows-XP)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Windows startup Powershell script not closing after Start-Process

    - by Matthew Phipps
    I've got a Powershell V2.0 startup script for my work computer (XP Professional 64-bit), as follows: start "C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE" -ArgumentList "/recycle" sleep -S 2 start "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -ArgumentList "https://mail.google.com" sleep -S 2 start "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -ArgumentList "-new-window https://www.google.com/calendar" sleep -S 2 start "C:\Program Files (x86)\Skype\Phone\Skype.exe" The sleeps are to ensure that the windows appear on the taskbar in the correct order. I run this from a shortcut on my Quick Launch with the following Target: C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe C:\scripts\initialize.ps1 (Yes, this is 2.0: powershell -Version 2.0 works, as does -Version 1.0, but not -Version 3.0) Problem is, the command window stays open until the Firefox windows are closed, which is not what I want. Looking at Process Explorer when I run the script, here's what happens: powershell.exe appears under explorer.exe and the Powershell window appears (with a black background, oddly. But it's not cmd.exe, since when I was debugging the script error messages would appear in red). outlook.exe appears under powershell.exe and the Outlook window appears. firefox.exe appears under powershell.exe and a Firefox window appears. A second firefox.exe appears under powershell.exe and another Firefox window appears. The second Firefox process then exits, as expected, since Firefox only uses one process. skype.exe appears under powershell.exe and the Skype window appears. The powershell.exe process inexplicably sticks around, as does the Powershell window. If I close both Firefox windows, the powershell.exe process exits and the Powershell window closes, and the outlook.exe and skype.exe processes appear under explorer.exe as expected. I suspect this has something to do with Firefox's standard input, output and error: I wouldn't expect Outlook or Skype to ever output anything to the console, but Firefox has command-line options that allow it to do so. I've looked over my about:config's user set values and didn't find anything suspicious. Finally, if I have a firefox.exe instance already running (started from the desktop shortcut) the problem doesn't occur (the powershell.exe process exits as it ought to). So what's going on here? I'm going to try adding -WindowStyle hidden to the shortcut next (gotta close this Firefox to test it), but I want to get to the bottom of this, if only to improve my understanding of how Windows consoles work.

    Read the article

  • How to open a pdf or a djvu on an specific instance of a document viewer?

    - by ciro
    I want using any free Linux document viewer that does both pdf and djvu (Okular, Evince, etc.) to do the following: magic_command('document-viewer','./11.pdf','instance1') magic_command('document-viewer','./21.djvu','instance2') two instances (windows) of document-viewer are opened one with 11.pdf and the other with 21.djvu then: magic_command('document-viewer','./12.djvu','instance1') magic_command('document-viewer','./22.pdf','instance2') the first instance (window) of document-viewer loads 12.djvu the second instance (window) of document-viewer loads 22.pdf

    Read the article

  • Check mysql slow queries

    - by Rafal Kaminski
    Is it possible to monitoring mysql like: if some queries is run more then 300 seconds - it will be warnings if some queries is run more then 500 seconds - it will be critical I tried: /usr/lib/nagios/plugins/check_mysql_health --hostname localhost --username icinga --password XXX --mode slow-queries --warning 300 But is show only rate slow_queries/per second :( Do you have some idea how i can monitoring sth. like i want? Thank you for help. Br,

    Read the article

  • Configuring two DNS zones with named.conf

    - by tike
    I am trying to configure DNS to run two domain names. I am able to do one domain but am not sure how to configure a second domain. So for example: test.com and test1.com on same machine. How do i configure zone file and named.conf to achieve this?

    Read the article

  • "Must-have" Windows commandline tools?

    - by hvtuananh
    One commandline tool per answer :) WalkOnLAN This small command line utility makes possible to switch on a computer from a second one by sending a "Magic Packet". Both of computers can be located on the same LAN or on the different LAN segments. Anything else?

    Read the article

  • Specify drive letters during installation

    - by Seva Alekseyev
    Hi all, The hard drive has two partitions. I'm installing Windows 7 on the second one. It automatically gets assigned the drive letter C (and the first partition becomes D). Is there any way to override this assignment during installation? It's a dual-boot system, and I want drive letters to be consistent. On the vanilla drive selection dialog, there's no letter assignment UI.

    Read the article

  • networked storage for a research group, 10-100 TB

    - by Marc
    this is related to this post: http://serverfault.com/questions/80854/scalable-24-tb-nas-for-research-department but perhaps a little more general. Background: We're a research lab of around 10 people who do a lot of experiments that involve taking pictures at one of several lab setups and then analyzing it an one of several lab computers. Each experiment may produce 2 or 3 GB of data, and we are generating data at the rate of about 10 TB/year. Right now, we are storing the data on a 6-bay netgear readynas pro, but even with 2 TB drive, this only gives us 10 TB of storage. Also, right now we are not backing up at all. Our short term backup plan is to get a second readynas, put it in a different building and mirror the one drive onto the other. Obviously, this is somewhat non-ideal. Our options: 1) We can pay our university $400/ TB /year for "backed up" online storage. We trust them more than we trust us, but not a whole lot. 2) We can continue to buy small NASs and mirror them between offices. One limit, although stupid, is that we don't have an unlimited number of ethernet jacks. 3) We can try to implement our own data storage solution, which is why I'm asking you guys. One thing to consider is that we're a very transient population and none of us are network administration experts. I will probably be here only another year or so, and graduate students, who are here the longest, have a 5-6 year time scale. So nothing can require expert oversight. Our data transfer rates are low - most of the data will just sit on the server waiting for someone to look at it once or twice - so we don't need a really high speed system. Given these contraints, can someone recommend a fairly low-cost, scalable, more or less turn key shared data storage system with backup in a separate physical location. Does such a thing exist or should we just pay the university to take care of it for us? As a second question, our professor just got tenure and is putting together a budget. Here the goal is to ask for as much as you can and hope you get a fraction of it. So the same question, minus the low-cost. Without budget constraints, can you recommend a scalable turn-key backed up storage system. Thanks

    Read the article

  • Automatically sending mails from office

    - by Rodnower
    Hello, I have VBA code in Excell that send mails, but every time it wait few second for me to accept the sending. Some time before I changed two (2) keys in registry and it sends without asking me for accepting, but I migrated computer and forgot where the keys are. Over internet there is very much bed solutions like to install some plugins and so on, and there isn't this simple solution in any place... Some one remember this two keys? Thank you for ahead.

    Read the article

  • How to replicate wwwroot over multiple IIS web servers with NLB without NAS?

    - by Igor K
    We're adding a second server with Windows NLB for a bit of redundancy (ie the power goes on one of the servers - I know its not the best solution). How can we keep the data identical between the servers? Dont want to use a SAN or NAS as thats just something else to go wrong. Customers can upload images with the web app so changes could be made on either server, as well as us uploaded a few changed files. Thanks

    Read the article

  • Using the same machineKey across two web farms

    - by wwilkins
    We have two separate NLB web farms. The first farm runs an app that delivers content to the customer facing application on the second NLB. We've noticed a single Cryptographic error in our logs that occurs whenever a page loading content from the first farm is accessed. Is there any reason to not give all of the servers in both farms the same machineKey settings?

    Read the article

  • Two wireless NICs on a MacBook - can I bind all VPN traffic to one, and everything else to another?

    - by Ben Aston
    I frequently connect to my workplace over a VPN. I would like to continue watching videos from, say YouTube, whilst I work on the VPN, without degrading the available VPN bandwidth (say for an RDP session). Can I configure a second NIC to deal with only the VPN traffic, with everything else going over the primary? Specs as requested: Macbook Pro, OSX Snow Leopard, using the built in OSX VPN connectivity, the in-built airport card and a USB external wifi adapter.

    Read the article

  • How to add a mirror-disk to my OpenSolaris?

    - by Sanoj
    I have a machine with two harddrives. I have installed OpenSolaris on one of them and now I want to add the other one as a mirror-drive in my zpool rpool. I guess I have to format the second disk first and then add it to the pool. How can I do this?

    Read the article

  • How to run open dns on a network

    - by user37652
    I need to be enlightened in this topic. First, is it possible to run open dns on a network so that you won't have to install the open dns updater to update the ip address of those machines with dynamic ip address. Second, how do I set it up. Can I set it up on the router?

    Read the article

  • Run an application only compatible with 32-bit on 64-bit machine

    - by Glenn
    Title's pretty explanatory. I have an application(Second Life) that isn't compatible with 64-bit windows 7. It says that it is compatible with Windows XP, Vista, and 7 but only the 32-bit version of 7. I need to know if it's possible for me to download something to make the application compatible with my computer. I've run troubleshooters and ran it as windows compatible XP service pack 2 and tried again with service pack 3.

    Read the article

  • Innodb Queries Slow

    - by user105196
    I have redHat 5.3 (Tikanga) with Mysql 5.0.86 configued with RIAD 10 HW, I run an application inquiries from Mysql/InnoDB and MyIsam tables, the queries are super fast,but some quires on Innodb tables sometime slow down and took more than 1-3 seconds to run and these queries are simple and optimized, this problem occurred just on innodb tables in different time with random queries. Why is this happening only to Innodb tables? the below is the Innodb status and some Mysql variables: show innodb status\G ************* 1. row ************* Status: 120325 10:54:08 INNODB MONITOR OUTPUT Per second averages calculated from the last 19 seconds SEMAPHORES OS WAIT ARRAY INFO: reservation count 22943, signal count 22947 Mutex spin waits 0, rounds 561745, OS waits 7664 RW-shared spins 24427, OS waits 12201; RW-excl spins 1461, OS waits 1277 TRANSACTIONS Trx id counter 0 119069326 Purge done for trx's n:o < 0 119069326 undo n:o < 0 0 History list length 41 Total number of lock structs in row lock hash table 0 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, process no 29093, OS thread id 1166043456 MySQL thread id 703985, query id 5807220 localhost root show innodb status FILE I/O I/O thread 0 state: waiting for i/o request (insert buffer thread) I/O thread 1 state: waiting for i/o request (log thread) I/O thread 2 state: waiting for i/o request (read thread) I/O thread 3 state: waiting for i/o request (write thread) Pending normal aio reads: 0, aio writes: 0, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 132777 OS file reads, 689086 OS file writes, 252010 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s INSERT BUFFER AND ADAPTIVE HASH INDEX Ibuf: size 1, free list len 366, seg size 368, 62237 inserts, 62237 merged recs, 52881 merges Hash table size 8850487, used cells 3698960, node heap has 7061 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s LOG Log sequence number 15 3415398745 Log flushed up to 15 3415398745 Last checkpoint at 15 3415398745 0 pending log writes, 0 pending chkp writes 218214 log i/o's done, 0.00 log i/o's/second BUFFER POOL AND MEMORY Total memory allocated 4798817080; in additional pool allocated 12342784 Buffer pool size 262144 Free buffers 101603 Database pages 153480 Modified db pages 0 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages read 151954, created 1526, written 494505 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout ROW OPERATIONS 0 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread process no. 29093, id 1162049856, state: waiting for server activity Number of rows inserted 77675, updated 85439, deleted 0, read 14377072495 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s END OF INNODB MONITOR OUTPUT 1 row in set, 1 warning (0.02 sec) read_buffer_size = 128M sort_buffer_size = 256M tmp_table_size = 1024M innodb_additional_mem_pool_size = 20M innodb_log_file_size=10M innodb_lock_wait_timeout=100 innodb_buffer_pool_size=4G join_buffer_size = 128M key_buffer_size = 1G can any one help me ?

    Read the article

  • What is the proper position for the loopback address in a DNS server selection list?

    - by Bigbio2002
    Best practices indicate that one should list 127.0.0.1 in the DNS list for the network adapter configuration for a Domain Controller, but not as the first one. With that said, what is the best place to put it in a list with more than two DNS servers listed? Second, last, or it doesn't matter? Also helpful would be an explanation as to why. Related question: What should the order of DNS servers be for the network adapter of a domain controller?

    Read the article

  • Grub Solaris FreeBSD dual boot

    - by pallavt
    I have solaris 10 installed on the first hard disk and freebsd installed on the second hard disk I edited the /boot/grub/menu.lst from solaris to the following title FreeBSD root (hd1,0) kernel /boot/loader Now when I try to boot into freebsd via the grub, it gives the following error root (hd1,0) Filesystem type unknown, partition type 0xee kernel /boot/loader Error 17: cannot mount selected partition

    Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >