Search Results

Search found 69503 results on 2781 pages for 'file listing'.

Page 154/2781 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

• Read only file system error on ubuntu after partitioning

  - by Ranjith R

  I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

  Read the article

• how to create java zip archives with a max file size limit [closed]

  - by Marci Casvan

  I need to write an algorithm in java (for an android app) to read a folder containing more folders and each of those containing images and audio files so the structure is this: mainDir/subfolders/myFile1.jpg It must be in java, something like perl script is not an option. It would preferably be for the compressed archive in order to squeeze as many files as possible before mailing the zip. Just a normal zip (no jar). My problem is that I need to limit the size of the archive to 16mb and at runtime, create as many archives as needed to contain all my files from my main mainDir folder. I tried several examples from the net, I read the java documentation, but I can't manage to understand and put it all together the way I need it. Has someone done this before or has a link or an example for me? I resolved the reading of the files with a recursive method but I can't write the logic for the zip creation I'm open for suggestions or better, a working example. EDIT: FileNotFoundException (no such file or directory) this was my initial post at Stack Overflow. I've got an answer to it, but I can't set the size of the ZipEntry and the logic doesn't work and also when extracting the my files from the zip I get the compression method not supported error.

  Read the article

• Getting "Unable to find a medium containing a live file system" when installing 10.10

  - by Krastin Konstantinov

  I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

  Read the article

• File doesn't exist when trying to change permissions following the avasys image scan manual

  - by Howard Graham

  I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• configuration issue with respect to .htaccess file on ubuntu

  - by Registered User

  I am building an application tshirtshop I have following configuration in /etc/apache2/sites-enabled/tshirtshop <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/tshirtshop <Directory /var/www/tshirtshop> Options Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> and following in .htaccess file in location /var/www/tshirtshop/.htaccess <IfModule mod_rewrite.c> # Enable mod_rewrite RewriteEngine On # Specify the folder in which the application resides. # Use / if the application is in the root. RewriteBase /tshirtshop #RewriteBase / # Rewrite to correct domain to avoid canonicalization problems # RewriteCond %{HTTP_HOST} !^www\.example\.com # RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L] # Rewrite URLs ending in /index.php or /index.html to / RewriteCond %{THE_REQUEST} ^GET\ .*/index\.(php|html?)\ HTTP RewriteRule ^(.*)index\.(php|html?)$ $1 [R=301,L] # Rewrite category pages RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2&Page=$3 [L] RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2 [L] # Rewrite department pages RewriteRule ^.*-d([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&Page=$2 [L] RewriteRule ^.*-d([0-9]+)/?$ index.php?DepartmentId=$1 [L] # Rewrite subpages of the home page RewriteRule ^page-([0-9]+)/?$ index.php?Page=$1 [L] # Rewrite product details pages RewriteRule ^.*-p([0-9]+)/?$ index.php?ProductId=$1 [L] </IfModule> the site is working on localhost and is working as if there is no .htaccess rule specified i.e. if I were to view a page as http://localhost/tshirtshop/nature-d2 then I get a 404 Error but if I view the same page as http://localhost/tshirtshop/index.php?DepartmentId=2 then I can view it. sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) reqtimeout_module (shared) rewrite_module (shared) setenvif_module (shared) status_module (shared) Syntax OK What is the mistake if any one can point out in above configuration, or else I need to check any thing else?

  Read the article

• Understanding IDAT chunk of PNG file format

  - by DRapp

  From the sample image below, I have a border in yellow just for display purposes only. The actual .png file is a simple black/white image 3 pixels by 3 pixels. I was originally thinking to try as a 2x2, but that would not help trying to interpret low/hi vs hi/low drawing stream. At least this way, I would have two black, one white from the top, or one white, two black from the bottom.. So I read the chunks of data, get to the IDAT chunk, decode that (zlib) and come up with 12 bytes as follows 00 20 00 40 00 80 So, my question, how does the above get broken down into the 3x3 black and white sample... Also, it is saved in palette format and properly recognizes the bit depth of 1 and color palette of 2... color pallet[0] is RGBA all zeros. Palette1 has RGBA of 255, 255, 255, 0 I'll eventually get into the multiple other depth formats later, just wanted to start with what would expect to be the easiest. Part II. Any guidance on handling the other depth formats would help if anything special to be considered especially regarding alpha channel (which I am already looking for in the palette) that might trip me up.

  Read the article

• Who keeps removing that file?

  - by mgerdts

  Over the years, I've had many times when some file gets removed and there's no obvious culprit.  With dtrace, it is somewhat easy to figure out:  #! /usr/sbin/dtrace -wqs syscall::unlinkat:entry /cleanpath(copyinstr(arg1)) == "/dev/null"/ {         stop();         printf("%s[%d] stopped before removing /dev/null\n", execname, pid);         system("ptree %d; pstack %d", pid, pid); } That script will stop the process trying to remove /dev/null before it does it.  You can allow it to continue by restarting (unstopping?) the command with prun(1) or killing it with kill -9.  If you want the command to continue automatically after getting the ptree and pstack output, you can add "; prun %d" and another pid argument to the system() call.

  Read the article

• Adding an user to samba

  - by JustMaximumPower

  I'm trying to setup some samba shares in my home network on an Ubuntu 12.04 machine. Everything works fine for my user account (max) but I can not add any new user. Every time I try to add new user they can not use the shares. It's likely that the error is very basic to the concept of samba but please don't just tell me to read the docs. I've been trying that for about 2 weeks now. I've set up the server with my user max who can mount transfer and the share max. Than I added the user simon with sudo adduser --no-create-home --disabled-login --shell /bin/false simon because the user should not be able to ssh into the machine. I did an sudo smbpasswd -a simon and set an (samba) password for simon and added an share for simon. I also added simon to transferusers to give him access to the share transfer. But simon can't connect to transfer or simons. ---- output of testparam: ------- Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[print$]" Processing section "[max]" Processing section "[simons]" Processing section "[transfer]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [max] comment = Privater share von Max path = /media/Main/max read only = No create mask = 0700 [simons] comment = Privater share von Simon path = /media/Main/simon read only = No create mask = 0700 [transfer] comment = Transferlaufwerk path = /media/Main/transfer read only = No create mask = 0755 ---- The files in /media/Main: ------ drwxrwxr-x 17 max max 4096 Oct 4 19:13 max/ drwx------ 5 simon max 4096 Aug 4 15:18 simon/ drwxrwxr-x 7 max transferusers 258048 Oct 1 22:55 transfer/

  Read the article

• How to add an SSH user to my Ubuntu 12 server to upload PHP files

  - by user229209

  I have an Ubuntu 12 VPS and wanted to create a user account to upload and download my PHP code. So when logged in as root I created a user "chris" and then created a directory /var/www/chris I want "chris" to be able to upload and run files to the /var/www/chris directory. Permissions for the chris dir look like this: drwxrwxr-x 2 root chris 4096 Aug 20 03:35 chris As root I created a sample file called abc.php and put it in the chris dir. It worked fine when I test it in a browser. I logged in as chris and uploaded a file called 1234.php. That did not work. I just got a blank PHP page. The code was identical in both files. So it is not the code. The permissions now look like this: -rw-r--r-- 1 root chris 59 Aug 20 03:34 1234.php -rw-r--r-- 1 root root 49 Aug 20 03:21 abc.php How do I alow the "chris" user to upload files and get them to work?

  Read the article

• Ubuntu rm not deleting files

  - by ILMV

  My colleague and I have been struggling with deleting a directory and its contents. We are working on a new version of our websites source code on Ubuntu 8.04 (dir: /var/www/websites), what we want to do is delete the websites directory and recreate it from a .tar backup we created a couple weeks ago. The purpose of this is so we can run our deployment procedure in a local environment before we do so on our live / public environment. We use this command: rm -r websites This deletes the directory and the files within it. The problem occurs when we un-tar our backup file and view the website we are getting files that don't exist in the .tar backup, in fact these files were only created a few days ago and should have been deleted. We delete the directory once more in the manner stated above, we then create a new websites directory using the mkdir command. Strangely at this stage the 'deleted files' do not come back, but if we unpack our .tar file the 'deleted files' appear again. Is there a way to ensure these files are deleted, or at least the pointers that associate them with said directory. Our .tar backup does not include these files We do not want to use the shred command We do not want to use 3rd party applications Solution should be functional via terminal (SSH) Many thanks! EDIT Er... we fixed it. Turns out the files that are reappearing are because of a link we have to another directory (outside the /var/www/websites), we were restoring the link but not deleting the files on the other end. D'oh! Many thanks for your help guys... friday afternoon syndrome :-)

  Read the article

• Ubuntu: Getting rid of a mimetype entry

  - by Epaga

  I have a pesky mimetype entry that I can't seem to get rid of. Here is the current situation: xdg-mime query filetype myfile.mfe application/pesky Using assogiate I have found out the information about this mime type entry (but can't delete it there). I have the following 'pesky.xml' XML file which was used to create the mime type (as far as I can tell, since it exactly matches the entry in assogiate...): <?xml version='1.0'?> <mime-info xmlns='http://www.freedesktop.org/standard'> <mime-type type="application/pesky"> <comment>my pesky type</comment> <glob pattern="*.mfe"/> <magic priority="100"> <match type="string" offset="0" value="application/pesky"/> </magic> </mime-type> <mime-info> However, the following has no effect: sudo xdg-mime uninstall --mode system --novendor pesky.xml The file association remains. Any ideas?

  Read the article

• How to transfer files via infrared on Linux?

  - by arielnmz

  I know this is a way too old technology but I've got some files inside a very old cellphone that I need to transfer to a very old computer. So far my Infrared USB device works well, it's detected by the machine (lsusb output): Bus 002 Device 002: ID 0df7:0620 Mobile Action Technology, Inc. MA-620 Infrared Adapter I've tried to send the file over MMS and even email (it lacks bluetooth, not to mention USB). But this cellphones's firmware doesn't let me attach the files. The file was originally transfered via IrDA, and it only has an internal memory (a whole 2 million bytes! whoa!). I found a package called irda-utils, but it seems that there are only two executables: irdaping and irdadump. I think the dump utility might do the job (which as far as I can see it's kind of a version of tcpdump but for IrDA), but I don't even know how to process the received frames. Could this question may be what I'm looking for? EDIT While reading through the Linux Infrared HOWTO I found about the OpenObex project, which may be what I'm looking for...

  Read the article

• Why doesn't my symbolic link work?

  - by orokusaki

  I'm trying to better understand symbolic links... and not having very much luck. This is my actual shell output with username/host changed: username@host:~$ mkdir actual username@host:~$ mkdir proper username@host:~$ touch actual/file-1.txt username@host:~$ echo "file 1" > actual/file-1.txt username@host:~$ touch actual/file-2.txt username@host:~$ echo "file 2" > actual/file-2.txt username@host:~$ ln -s actual/file-1.txt actual/file-2.txt proper username@host:~$ # Now, try to use the files through their links username@host:~$ cat proper/file-1.txt cat: proper/file-1.txt: No such file or directory username@host:~$ cat proper/file-2.txt cat: proper/file-2.txt: No such file or directory username@host:~$ # Check that actual files do in fact exist username@host:~$ cat actual/file-1.txt file 1 username@host:~$ cat actual/file-2.txt file 2 username@host:~$ # Remove the links and go home :( username@host:~$ rm proper/file-1.txt username@host:~$ rm proper/file-2.txt I thought that a symbolic link was supposed to operate transparently, in the sense that you could operate on the file that it points to as if you were accessing the file directly (except of course in the case of rm where of course the link is simply removed).

  Read the article

• download management

  - by Jonathan

  I download many files, usually 2 or 3 a day, often 10ish. Some of them are duplicates because I just can't be bothered to find the original in my downloads folder. I have previously tried DAP and used that to create a new subfolder for each day's download. yet I have found this insufficient as sometimes I wish to find files by name/file type or I have multiple parts of downloads over more than one day. Another problem I have found is zips/rars/etc after downloading them and extracting them I then have the zip and the folder. I like it like on a Mac where it automatically extracts the zip after it has been downloaded and removes the zip. What I'd like to be able to do is sort the downloads by date, but dynamically so they are just in the big downloads folder, but I can just press a button and it will show me all the files from a particular site, or from a particular day or by a certain file type. Is there any software that will do this? I use Chrome as a browser but also have Firefox and like that. Jonathan

  Read the article

• Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

  - by Dejan Janjuševic

  At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional client via VPN. The VPN was set up using RRAS on the server machine. I will try to provide as much informations as possible in order to make the issue more clear. When trying to copy the compressed file sized ~2.5 MB (via Explorer or CMD, doesn't matter), the process stalls after some 20%, producing an error message after few seconds: Cannot copy filename: The specified network name is no longer available. If i start the command ping -t 192.168.2.1 (where the IP address specified belongs to the server) side by side with the copy command, I can clearly see that the ping command times out for few seconds as the copy process stalls. When this happens all network activities are frozen. After a few seconds, the network recovers, ping continues to run normally, however the copy process stands still before it displays the above error message. Copying other files (I tried 4-5 files), of which some are larger and some are smaller, succeeds. Seems to me that I can copy all uncompressed files. As soon as I try to copy an archive, the process freezes. Even a 707 KB large archive can't be copied. I can only reproduce this behavior on 2 machines, both Windows XP Professional, one is w/ SP2 and the other w/ SP3. Other XP clients don't have this problem, neither do Windows 7 clients. If I connect to the server using Remote Desktop Connection without using VPN from either of these 2 machines (using the same user account), I can copy anything I want normally, even these "problematic" files. Does anyone have any clue about what could possibly be going on?

  Read the article

• Compressing and copying large files on Windows Server?

  - by Aaron

  I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

  Read the article

• 403 Forbidden error on Mac OSX - Apache and nginx

  - by tlianza

  Hi All, There are a million questions like this on Google, but I haven't found a solution to my problem. The default Apache install on my Mac is giving 403 Forbidden errors for everything (default directory, user home directory, virtual server, etc). After sifting through the config files, I figured I'd give nginx a try. Nginx serves files fine from it's home directory, but it won't serve files from a subfolder of my user directory. I've configured a simple virtual host, and requesting index.html returns a 403-forbidden. The error message in nginx's log file is pretty clear - it can't read the file: 2011/01/04 16:13:54 [error] 96440#0: *11 open() "/Users/me/Documents/workspace/mobile/index.html" failed (13: Permission denied), client: 127.0.0.1, server: local.test.com, request: "GET /index.html HTTP/1.1", host: "local.test.com" I've opened up this directory to everyone: drwxrwxrwx 6 me admin 204B Dec 31 20:49 mobile And all the files in it: $ ls -lah mobile/ total 24 drwxrwxrwx 6 me admin 204B Dec 31 20:49 . drwxr-xr-x 71 me me 2.4K Dec 31 20:41 .. -rw-r--r--@ 1 me me 6.0K Jan 2 18:58 .DS_Store -rwxrwxrwx 1 me admin 2.1K Jan 4 14:22 index.html drwxrwxrwx 5 me admin 170B Dec 31 20:45 nbproject drwxrwxrwx 5 me admin 170B Jan 2 18:58 script And yet, I cannot figure out why the nginx process cannot read index.html. It's running as the "nobody" user, but the permissions are set such that anyone can read them.

  Read the article

• Samba4/Ubuntu Shares Incorrectly Available to All Users

  - by Dan

  I've got my Ubuntu server working with Samba4 and got it set up as the Primary domain controller on my network with AD and all that goodness. However, I'm trying to get my Samba configuration to work with the users and groups I've defined with the Active Directory tools from Windows. For instance, I've got a share X which I want users A and B (as part of the 'management' group, known as LLGrpManager in my setup) to see, but no body else. However, after making changes to the configuration, restarting Samba, I test by connecting to the share with my Mac over Samba as user 'C' which isn't part of the management group, and I can, incorrectly, see the X share. I've tried alsorts of combinations of specifying the group with no luck at all. I've got a feeling that my global config might be too lenient or something to do with file permissions but being a bit green, I'm without clue. My /etc/samba/smb.conf # Global parameters [global] server role = domain controller server string = Office Server workgroup = LLDOMAIN realm = lldomain.local netbios name = DUMBO passdb backend = samba4 logon path = \\%L\profiles\%U logon drive = L: log file = /var/log/samba/%m.log max log size = 50 security = ads domain logons = yes domain master = auto usershare allow guests = no valid users = %S [netlogon] path = /var/lib/samba/sysvol/lldomain.local/scripts read only = no guest ok = no [sysvol] path = /var/lib/samba/sysvol read only = No guest ok = no valid users = @LLDOMAIN\LLGrpManager [ShareX] path = /data comment = Entire Data Volume guest ok = no comment = Entire Data Volume guest ok = no valid users = @LLDOMAIN\LLGrpManager admin users = @LLDOMAIN\LLGrpManager browsable = no inherit acls = yes inherit permissions = yes ... My /etc/nsswitch.conf I've also instructed the system to use the nss winbind library when searching for users or groups by adding the stanza passwd and group in /etc/nsswitch.conf: passwd: compat winbind group: compat winbind shadow: compat Permissions on the folder in question drwxrwxrwt 8 root root 4.0K Oct 28 19:11 data

  Read the article

• Homebrew large data cluster access for 2 user levels?

  - by Yegor

  The title probably makes little sense, so here is an example. I have a file hosting site, that serves a large amount of semi-randomly accessed files. The setup is as follows: High horsepower front-end +DB server that also does encoding for files that need encoding Fresh file server, which stores newly uploaded content, thats probably (and usually) rapidly accessible, which has 500GB of raided SSD storage, that can push over 3GBit of traffic. 3 cheap node servers, containing 2 x 750GB SATA drives in raid1, where files older than 2 weeks are archived, from the SSD server (mentioned above). Files on each server are accessed via subdomains (via modsec) in a straight forward fashion (server1.domain.com, server2.domain.com, etc) Where I have the problem is this. I introduced a "premium" service where people pay a small fee every month, and get ad-free, quick accesses to stuff on the site. Once they are logged in, they access same files via premium.server1.domain.com via a different modsec script, with a different pass phrase. That all works fine and dandy.... except the cheap node servers are all IO bound, so accessing the files on them via a different, unsaturated network makes no difference, since it cannot read off the drive fast enough. What would be a good way to make files on the site be accessible via 2 different network routes, 1 of which will be saturated (the "free network") while all other files are on an un-saturated "premium" network?

  Read the article

• Windows cannot open directory with too long name created by Linux

  - by Tim

  Hello! My laptop has two OSes: Windows 7 and Ubuntu 10.10. A partition of Windows 7 of format NTFS is mounted in Ubuntu. In Ubuntu, I created a directory under somehow deep path and with a long name for itself, specifically, the name for that directory is "a set of size-measurable subsets ie sigma algebra". Now in Windows, I cannot open the directory, which I guess is because of the name is too long, nor can I rename it. I was wondering if there is some way to access that directory under Windows? Better without changing the directory if possible, but will have to if necessary. Thanks and regards! Update: This is the output using "DIR /X" in cmd.exe, which does not shorten the directory name: F:\science\math\Foundations of mathematics\set theory\whether element of a set i s also a set\when element is set\when element sets are subsets of a universal se t\closed under some set operations\sigma algebra of sets>DIR /X Volume in drive F is Data Volume Serial Number is 0492-DD90 Directory of F:\science\math\Foundations of mathematics\set theory\whether elem ent of a set is also a set\when element is set\when element sets are subsets of a universal set\closed under some set operations\sigma algebra of sets 03/14/2011 10:43 AM <DIR> . 03/14/2011 10:43 AM <DIR> .. 03/08/2011 10:09 AM <DIR> a set of size-measurable sub sets ie sigma algebra 02/12/2011 04:08 AM <DIR> example 02/17/2011 12:30 PM <DIR> general 03/13/2011 02:28 PM <DIR> mapping from sigma algebra t o R or C i.e. measure 02/12/2011 04:10 AM <DIR> msbl mapping from general ms bl space to Borel msbl R or C 02/12/2011 04:10 AM 4,928 new file~ 03/14/2011 10:42 AM <DIR> temp 03/02/2011 10:58 AM <DIR> with Cartesian product of se ts 1 File(s) 4,928 bytes 9 Dir(s) 39,509,340,160 bytes free

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Solution to easily share large files with non-tech-savvy users?

  - by Tim

  Hey all, We've got a server setup at work which we'd like to use to exchange large files with known clients easily. We're looking into software to facilitate this, but somewhow typing "large file hosting" into Google gives questionable results.. ;) We've come up with the following requirements, and I hope any of you can points us in the direction of a solution that offers this functionality, or is malleable to our needs. Synchronization / revision management is of no concern, it's mostly single large (up to 1+ GB) file uploads & downloads we'll need. We'd like to make the downloads expire & be removed after a certain number of days / downloads, to limit the amount of cleanup we'd have to do. The data files exchanged sometimes hold confidential information, so the URLs generated should be random and not publicly visible. Our users are of the less technically savvy variety, so a simple webform would be best over a desktop client (because we also have to support a mix of operating systems). As for use of the system we'd either like to send out generated random URLs for them to upload their files, or have an easy way manage & expire users. Works on a linux (Ubuntu) server (so nothing .Net-related please) Does anyone know of software that fits the above criteria? We've already seen a few instances of this within the scientific community, but nothing we could use directly.. Best regards, Tim

  Read the article

• Solution to easily share large files with non-tech-savvy users?

  - by Tim

  Hey all, We've got a server setup at work which we'd like to use to exchange large files with known clients easily. We're looking into software to facilitate this, but somewhow typing "large file hosting" into Google gives questionable results.. ;) We've come up with the following requirements, and I hope any of you can points us in the direction of a solution that offers this functionality, or is malleable to our needs. Synchronization / revision management is of no concern, it's mostly single large (up to 1+ GB) file uploads & downloads we'll need. We'd like to make the downloads expire & be removed after a certain number of days / downloads, to limit the amount of cleanup we'd have to do. The data files exchanged sometimes hold confidential information, so the URLs generated should be random and not publicly visible. Our users are of the less technically savvy variety, so a simple webform would be best over a desktop client (because we also have to support a mix of operating systems). As for use of the system we'd either like to send out generated random URLs for them to upload their files, or have an easy way manage & expire users. Works on a linux (Ubuntu) server (so nothing .Net-related please) Does anyone know of software that fits the above criteria? We've already seen a few instances of this within the scientific community, but nothing we could use directly.. Best regards, Tim

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >