Search Results

Search found 5900 results on 236 pages for 'rest'.

Page 154/236 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Playing NSF music in FMOD.net

  - by Tesserex

  So, as the title says, I want to be able to play NSF files using FMOD, because my project already uses FMOD and I'd rather not replace it. This will involve figuring out how existing players and emulators work and porting it. I haven't yet found an existing player that uses FMOD. My starting point is the MyNes source from http://sourceforge.net/projects/mynes/. There are two big steps between here and what I'm looking for. MyNes plays from a ROM, not NSF. So, I have to rip out the APU and get it to play NSF files. The MyNes APU uses SlimDX, so I have to convert that to FMOD.NET. I am really stuck about how to go about either of these, because I'm not that familiar with audio formats and it's hard finding resources online. So here are a few questions: From what I can tell from the NSF spec at http://kevtris.org/nes/nsfspec.txt, it's just contains the relevant memory section of the ROM, plus the header. If anyone can verify or correct this that would be great. The emulator APU uses data from the rest of the emulator to play, including things like cycle counts. I'm not sure what replaces this in a standalone player. Can't I just load all the music data at once into a stream and play it? Joining #1 and #2, does the header data from the NSF substitute for some of the ROM data in the emulator code? Using FMOD, will I be following the usercreatedsound example for loading a stream? And does this format count as PCM? Specifically MyNes says PCM8. Any tips on loading / playing the stream in FMOD are appreciated. As an aside, I don't really understand the loading / playing sections of the spec I linked at all. It seems to apply to 6502 systems / emulators only and not to my situation. I know it's a long shot for anyone here to have enough experience in this area to help, but anything you can provide is definitely appreciated. A link to an existing .NET library that does this would be even better, but I don't believe one exists.

  Read the article

• European e-government Action Plan all about interoperability

  - by trond-arne.undheim

  Yesterday, the European Commission released its European eGovernment Action Plan for 2011-2015. The plan includes measures on providing deeper user empowerment, enhancing the Internal Market, more efficiency and effectiveness of public administrations, and putting in place pre-conditions for developing e-government. The Good - Defines interoperability very clearly. Calls interoperability "a pre-condition for cross-border eGovernment services" (a very strong formulation) and says interoperability "is supported by open specifications". - Uses the terminology "open specifications" which, let's face it, is pretty close to "open standards" which is the term the rest of the world would use. - Confirms that Member States are fully committed to the political priorities of the Malmö Declaration (which was all about open standards) including the very strong action: by 2013: All Member States will have incorporated the political priorities of the Malmö Declaration in their national strategies. Such tight Action Plan integration between Commission and Member State priorities has seldom been attempted before, particularly not in a field where European legal competence is virtually non-existent. What we see now, is the subtle force of soft power rather than the rough force of regulation. In this case, it is the Member States who want Europe to take the lead. Very refreshing! Some quotes that show the commitment to interoperability and open specifications: "The emergence of innovative technologies such as "service-oriented architectures" (SOA), or "clouds" of services,  together with more open specifications which allow for greater sharing, re-use and interoperability reinforce the ability of ICT to play a key role in this quest for effficiency in the public sector." (p.4) "Interoperability is supported through open specifications" (p.13) 2.4.1. Open Specifications and Interoperability (p.13 has a whole section dedicated to this important topic. Open specifications and interoperability are nearly 100% interrelated): "Interoperability is the ability of systems and machines to exchange, process and correctly interpret information. It is more than just a technical challenge, as it also involves legal, organisational and semantic aspects of handling  data" (p.13) "standards and  open platforms offer opportunities for more cost-effective use of resources and delivery of services" (p.13). The Bad Shies away from defining open standards, or even open specifications, the EU's preferred term for the key enabler of interoperability. Verdict 90/100, a very respectable score.

  Read the article

• Customer Support Spotlight: Clemson University

  - by cwarticki

  I've begun a Customer Support Spotlight series that highlights our wonderful customers and Oracle loyalists.  A week ago I visited Clemson University.  As I travel to visit and educate our customers, I provide many useful tips/tricks and support best practices (as found on my blog and twitter). Most of all, I always discover an Oracle gem who deserves recognition for their hard work and advocacy. Meet George Manley.  George is a Storage Engineer who has worked in Clemson's Data Center all through college, partially in the Hardware Architecture group and partially in the Storage group. George and the rest of the Storage Team work with most all of the storage technologies that they have here at Clemson. This includes a wide array of different vendors' disk arrays, with the most of them being Oracle/Sun 2540's.  He also works with SAM/QFS, ACSLS, and our SL8500 Tape Libraries (all three Oracle/Sun products). (pictured L to R, Matt Schoger (Oracle), Mark Flores (Oracle) and George Manley) George was kind enough to take us for a data center tour.  It was amazing.  I rarely get to see the inside of data centers, and this one was massive. Clemson Computing and Information Technology’s physical resources include the main data center located in the Information Technology Center at the Innovation Campus and Technology Park. The core of Clemson’s computing infrastructure, the data center has 21,000 sq ft of raised floor and is powered by a 14MW substation. The ITC power capacity is 4.5MW.  The data center is the home of both enterprise and HPC systems, and is staffed by CCIT staff on a 24 hour basis from a state of the art network operations center within the ITC. A smaller business continuance data center is located on the main campus.  The data center serves a wide variety of purposes including HPC (supercomputing) resources which are shared with other Universities throughout the state, the state's medicaid processing system, and nearly all other needs for Clemson University. Yes, that's no typo (14,256 cores and 37TB of memory!!! Thanks for the tour George and thank you very much for your time.  The tour was fantastic. I enjoyed getting to know your team and I look forward to many successes from Clemson using Oracle products. -Chris WartickiGlobal Customer Management

  Read the article

• Is the science of Computer Science dead?

  - by Veaviticus

  Question : Is the science and art of CS dead? By that I mean, the real requirements to think, plan and efficiently solve problems seems to be falling away from CS these days. The field seems to be lowering the entry-barrier so more people can 'program' without having to learn how to truly program. Background : I'm a recent graduate with a BS in Computer Science. I'm working a starting position at a decent sized company in the IT department. I mostly do .NET and other Microsoft technologies at my job, but before this I've done Java stuff through internships and the like. I personally am a C++ programmer for my own for-fun projects. In Depth : Through the work I've been doing, it seems to me that the intense disciplines of a real science don't exist in CS anymore. In the past, programmers had to solve problems efficiently in order for systems to be robust and quick. But now, with the prevailing technologies like .NET, Java and scripting languages, it seems like efficiency and robustness have been traded for ease of development. Most of the colleagues that I work with don't even have degrees in Computer Science. Most graduated with Electrical Engineering degrees, a few with Software Engineering, even some who came from tech schools without a 4 year program. Yet they get by just fine without having the technical background of CS, without having studied theories and algorithms, without having any regard for making an elegant solution (they just go for the easiest, cheapest solution). The company pushes us to use Microsoft technologies, which take all the real thought out of the matter and replace it with libraries and tools that can auto-build your project for you half the time. I'm not trying to hate on the languages, I understand that they serve a purpose and do it well, but when your employees don't know how a hash-table works, and use the wrong sorting methods, or run SQL commands that are horribly inefficient (but get the job done in an acceptable time), it feels like more effort is being put into developing technologies that coddle new 'programmers' rather than actually teaching people how to do things right. I am interested in making efficient and, in my opinion, beautiful programs. If there is a better way to do it, I'd rather go back and refactor it than let it slide. But in the corporate world, they push me to complete tasks quickly rather than elegantly. And that really bugs me. Is this what I'm going to be looking forward to the rest of my life? Are there still positions out there for people who love the science and art of CS rather than just the paycheck? And on the same note, here's a good read if you haven't seen it before The Perils Of Java Schools

  Read the article

• How do you stop OgreBullet Capsule from falling over?

  - by Nathan Baggs

  I've just started implementing bullet into my Ogre project. I followed the install instructions here: http://www.ogre3d.org/tikiwiki/OgreBullet+Tutorial+1 And the rest if the tutorial here: http://www.ogre3d.org/tikiwiki/OgreBullet+Tutorial+2 I got that to work fine however now I wanted to extend it to a handle a first person camera. I created a CapsuleShape and a Rigid Body (like the tutorial did for the boxes) however when I run the game the capsule falls over and rolls around on the floor, causing the camera swing wildly around. I need a way to fix the capsule to always stay upright, but I have no idea how Below is the code I'm using. (part of) Header File OgreBulletDynamics::DynamicsWorld *mWorld; // OgreBullet World OgreBulletCollisions::DebugDrawer *debugDrawer; std::deque<OgreBulletDynamics::RigidBody *> mBodies; std::deque<OgreBulletCollisions::CollisionShape *> mShapes; OgreBulletCollisions::CollisionShape *character; OgreBulletDynamics::RigidBody *characterBody; Ogre::SceneNode *charNode; Ogre::Camera* mCamera; Ogre::SceneManager* mSceneMgr; Ogre::RenderWindow* mWindow; main file bool MinimalOgre::go(void) { ... mCamera = mSceneMgr->createCamera("PlayerCam"); mCamera->setPosition(Vector3(0,0,0)); mCamera->lookAt(Vector3(0,0,300)); mCamera->setNearClipDistance(5); mCameraMan = new OgreBites::SdkCameraMan(mCamera); OgreBulletCollisions::CollisionShape *Shape; Shape = new OgreBulletCollisions::StaticPlaneCollisionShape(Vector3(0,1,0), 0); // (normal vector, distance) OgreBulletDynamics::RigidBody *defaultPlaneBody = new OgreBulletDynamics::RigidBody( "BasePlane", mWorld); defaultPlaneBody->setStaticShape(Shape, 0.1, 0.8); // (shape, restitution, friction) // push the created objects to the deques mShapes.push_back(Shape); mBodies.push_back(defaultPlaneBody); character = new OgreBulletCollisions::CapsuleCollisionShape(1.0f, 1.0f, Vector3(0, 1, 0)); charNode = mSceneMgr->getRootSceneNode()->createChildSceneNode(); charNode->attachObject(mCamera); charNode->setPosition(mCamera->getPosition()); characterBody = new OgreBulletDynamics::RigidBody("character", mWorld); characterBody->setShape( charNode, character, 0.0f, // dynamic body restitution 10.0f, // dynamic body friction 10.0f, // dynamic bodymass Vector3(0,0,0), Quaternion(0, 0, 1, 0)); mShapes.push_back(character); mBodies.push_back(characterBody); ... }

  Read the article

• SQL SERVER – CSVExpress and Quick Data Load

  - by pinaldave

  One of the newest ETL tools is CSVexpress.com.  This is a program that can quickly load any CSV file into ODBC compliant databases uses data integration.  For those of you familiar with databases and how they operate, the question that comes to mind might be what use this program will have in your life. I have written earlier article on this subject over here SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress. You might know that RDBMS have automatic support for loading CSV files into tables – but it is not quite as easy as one click of a button.  First of all, most databases have a command line interface and you need the file and configuration script in order to load up.  You also need to know enough to write the script – which for novices can be extremely daunting.  On top of all this, if you work with more than one type of RDBMS, you need to know the ins and outs of uploading and writing script for more than one program. So you might begin to see how useful CSVexpress.com might be!  There are many other tools that enable uploading files to a database.  They can be very fancy – some can generate configuration files automatically, others load the data directly.  Again, novices will be able to tell you why these aren’t the most useful programs in the world.  You see, these programs were created with SQL in mind, not for uploading data.  If you don’t have large amounts of data to upload, getting the configurations right can be a long process and you will have to check the code that is generated yourself.  Not exactly “easy to use” for novices. That makes CSVexpress.com one of the best new tools available for everyone – but especially people who don’t want to learn a lot of new material all at once.  CSVexpress has an easy to navigate graphical user interface and no scripting or coding is required.  There are built-in constraints and data validations, and you can configure transforms and reject records right there on the screen.  But the best thing of all – it’s free! That’s right, you can download CSVexpress for free from www.csvexpress.com and start easily uploading and configuring riles almost immediately.  If you’re currently happy with your method of data configuration, keep up with the good work.  For the rest of us, there’s CSVexpress.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• Voxel Face Crawling (Mesh simplification, possibly using greedy)

  - by Tim Winter

  This is in regards to a Minecraft-like terrain engine. I store blocks in chunks (16x256x16 blocks in a chunk). When I generate a chunk, I use multiple procedural techniques to set the terrain and to place objects. While generating, I keep one 1D array for the full chunk (solid or not) and a separate 1D array of solid blocks. After generation, I iterate through the solid blocks checking their neighbors so I only generate block faces that don't have solid neighbors. I store which faces to generate in their own list (that's 6 lists, one per possible face). When rendering a chunk, I render all lists in the camera's current chunk and only the lists facing the camera in all other chunks. Using a 2D atlas with this little shader trick Andrew Russell suggested, I want to merge similar faces together completely. That is, if they are in the same list (same normal), are adjacent to each other, have the same light level, etc. My assumption would be to have each of the 6 lists sorted by the axis they rest on, then by the other two axes (the list for the top of a block would be sorted by it's Y value, then X, then Z). With this alone, I could quite easily merge strips of faces, but I'm looking to merge more than just strips together when possible. I've read up on this greedy meshing algorithm, but I am having a lot of trouble understanding it. To even use it, I would think I'd need to perform a type of flood-fill per sorted list to get the groups of merge-able faces. Then, per group, perform the greedy algorithm. It all sounds awfully expensive if I would ever want dynamic terrain/lighting after initial generation. So, my question: To perform merging of faces as described (ignoring whether it's a bad idea for dynamic terrain/lighting), is there perhaps an algorithm that is simpler to implement? I would also quite happily accept an answer that walks me through the greedy algorithm in a much simpler way (a link or explanation). I don't mind a slight performance decrease if it's easier to implement or even if it's only a little better than just doing strips. I worry that most algorithms focus on triangles rather than quads and using a 2D atlas the way I am, I don't know that I could implement something triangle based with my current skills. PS: I already frustum cull per chunk and as described, I also cull faces between solid blocks. I don't occlusion cull yet and may never.

  Read the article

• Atheros AR9285 / Lenovo G560 wireless not working after installing 13.04

  - by teyi

  I had Ubuntu 12.04 initially installed on my laptop. I upgraded to 12.10 then 13.04. Everything worked fine, including wireless. After adding a new memory card ( I only had 2 gb and one memory slot free) my wireess stopped working. I backed up all my data and reinstallled Ubuntu 13.04. Everything works fine except wireess. I bought this laptop in 2010 from Japan. It has Intel Core i5 CPU M 450 @2.40 Ghz * 4 3,7 Gb RAM os type 64 bit The output of iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off The output of rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no The output of lshw -C network: *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:7d:fe:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.8.0-19-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d6400000-d640ffff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:2b:36:ac size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff The wi-fi network appears as disconnected ( it's greyed out) Strangely enough I see a wifi network ( not mine) but not mine or the rest. That network doesn't require a password . I click on it, try to connect and i get an error message: failed to connect to xxxxx ... 32) The access point/org/freedesktop/NetworkManager/AccessPoint/0 was not in the scan list. Someone help please

  Read the article

• SSIS Reporting Pack update

  - by jamiet

  Its been a while since I last posted anything in regard to SSIS Reporting Pack, the most recent release being on 27th May 2012, so here is a short update. There is still lots of work to do on SSIS Reporting Pack; lots more features to add, lots of performance work to be done, and a few bug fixes too. I have also been (fairly) hard at work on a framework to be used in conjunction with SSIS 2012 that I refer to as the Restart Framework (currently residing at http://ssisrestartframework.codeplex.com/). There is still much work to be done on the Restart Framework (not least some useful documentation on how to use it) which is why I haven’t mentioned it publicly before now although I am actively checking in changes. One thing I am considering is amalgamating the two projects into one; this would mean I could build a suite of reports that both work against the SSIS Catalog (what you currently know as “SSIS Reporting Pack”) and also against this Restart Framework thing. No decision has been made as yet though. There have been a number of bug reports and feature suggestions for SSIS Reporting Pack added to the Issue Tracker. Thank you to everyone that has submitted something, rest assured I am not going to ignore them forever; my time is at a premium right now unfortunately due to … well … life… so working on these items isn’t near the top of my priority list. Lastly, I am actively using SSIS Reporting Pack in a production environment right now and I’m happy to report that it is proving to be very useful. One of the reports that I have put a lot of time into is execution executable duration.rdl and its proving very adept at easily identifying bottlenecks in our SSIS 2012 executions: The report allows you to browse through the hierarchy of executables in each execution and each bar represents the duration of each executable in relation to all the other executables; longer bars being a good indication of where problems might lie. The colour of the bar indicates whether it was successful or not (green=success). Hovering over a bar brings up a tooltip showing more information about that executable. Clicking on a bar allows you to compare this particular instance of the executable against other executions. Please do let me know if you are using SSIS Reporting Pack. I would like to hear any anecdotes you might have, good or bad. @Jamiet

  Read the article

• Rendering another screen on top of main game screen in fullscreen mode

  - by wolf

  my game runs in fullscreen mode and uses active rendering. The graphics are drawn on the fullscreen window in each game loop: public void render() { Window w = screen.getFullScreenWindow(); Graphics2D g = screen.getGraphics(); renderer.render(g, level, w.getWidth(), w.getHeight()); g.dispose(); screen.update(); } This is the screen.update() method: public void update(){ Window w = device.getFullScreenWindow(); if(w != null){ BufferStrategy s = w.getBufferStrategy(); if(!s.contentsLost()){ s.show(); } } } I want to display another screen on my main game screen (menu, inventory etc). Lets say I have a JPanel inventory, which has a grid of inventory cells (manually drawn) and some Swing components like JPopupMenu. So i tried adding that to my window and repainting it in the game loop, which worked okay most of the time... but sometimes the panel wouldn't get displayed. Blindly moving things around in the inventory worked, but it just didn't display. When i alt-tabbed out and back again, it displayed properly. I also tried drawing the rest of the inventory on my full screen window and using a JPanel to display only the buttons and popupmenus. The inventory displayed properly, but the Swing components keep flickering. I'm guessing this is because I don't know how to combine active and passive rendering. public void render() { Graphics2D g = screen.getGraphics(); invManager.render(g); g.dispose(); screen.update(); invPanel.repaint(); } Should i use something else instead of a JPanel? I don't really need active rendering for these screens, but I don't understand why they sometimes just don't display. Or maybe I should just make my own custom components instead of using Swing? I also read somewhere that using multiple panels/frames in a game is bad practice so should I draw everything on one window/frame/panel? If I CAN use JPanels for this, should I add and remove them every time the inventory is toggled? Or just change their visibility?

  Read the article

• SharePoint 2010 Data Retrival Techinques

  - by Jayant Sharma

  In SharePoint, we have two options to perform CRUD operation.1. using server side code2. using client side codeusing server side code, we have 1. CAML2. LINQusing client side code, we have 1. Client Object Model    1.1.      Managed Client Object Model     1.2.     Silverlight Client Object Model    1.3.     ECMA Client Object Model2. SharePoint Web Services3. ADO Data Service (based on REST Web Services)4. Using RPC Call (owssvr.dll)Which and when these options are used depend upon requirements. Every options are certain advantages and disadvantages. So, before start development of any new sharepoint project, it is important to understand the limitations of different methods.Server Object Model is used when our application is host on the same server on which sharepoint is installed. while Client Side code is used to access sharepoint from client system. In SharePoint 2010 specially Client Object Model (COM) are introduced to perform the sharepoint operations from client system. Advantage of CAML:    -  It is fast.    -  Can be use it from all kind of technology like Silverlight, or Jquery    -  You can use U2U CAML Query builder to generate CAML Query.Disadvantage Of CAML:    - Error Prone, as we can detect the error only at runtimeAdvantage of LINQ:    -  Object Oriented technique (Object Relation Model)    -  LINQ  to SharePoint provider are working with Strongly Type List Item Objects, So intellisence are present at runtime    -  No need of knowledge of CAML    -  Less Error Prone as it as it uses C# syntex.    -  You can compare two Fields of SharePoint ListDisadvantage Of LINQ:    -  List Attachment is not supported in SPMetal Tool    -  Created By, Created, Modified and Modified By Fields are not created by SPMetal Tool.    -  Custom fields are not created by SPMetal Tools    -  External Lists are not supported    -  Though at backend LINQ genenates CAML Query so it is slower than directly using CAML in Code.  Advantage of Client Object Model    -  Used to access sharepoint from client system    -  No WebServer is required at Client End    - Can use Silverlight and JavaScripts to make better and fast User experienceDisadvantage of Client Object Model    -  You cannot use RunwithEleveatedPrivilege    - Cross Site Collection query are not possible    - Lesser API's are availableADO.Net Data Services:    -  Only List based operations are possible, other type of operations are not possible.SharePoint Web Services and RPC Call:    - Previously it was used in SharePoint 2007 but after the introduction  of Client Object Model,  Microsoft recommends not to use Web Services to fetch data from SharePoint. In SharePoint 2010 it is avaliable only for backward compatibility.Ref: http://msdn.microsoft.com/en-us/library/ee539764Jayant Sharma

  Read the article

• Work at Oracle as a Fresh Student by Ang Sun

  - by Nadiya

  The past months have flown by since I started working at Oracle; but at the same time it feels like I’ve been here forever. I came to Beijing to find a job after I graduated from The University of Southampton with a MSc in Software Engineering. I got an offer the next day after I had an interview with my manager. This new style of working life hasn’t been a problem with me. The atmosphere here is fantastic and everyone is so friendly and easy to talk to. I am the first member in our AIE China Team. We do appreciate those colleagues from Core I/O team who helped us a lot to familiarize ourselves with the new environment. After hire orientation training I got to know many new people from various teams including Middleware, People Soft and Solaris. Also Oracle provides weekly system online training as additional training for those people who need it. The best thing about working at Oracle is that there is a balance between work and rest. It’s good to have a really nice park and green space near the Oracle buildings. Most of us like to walk around the riverside after lunch before we get back to work. I like to grab a cup of latte before discussing issues and the schedule of our projects in a weekly conference call with my US colleagues. It has been great experience; I am working alongside talented colleagues from different countries and nationalities. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Izenda Reports 6.3 Top 10 Features

  - by gt0084e1

  Izenda 6.3 Top 10 New Features and Capabilities 1. Izenda Maps Add-On The Izenda Maps add-on allows rapid visualization of geographic or geo-spacial data.  It is fully integrated with the the rest of Izenda report package and adds a Maps tab which allows users to add interactive maps to their reports. Contact your representative or [email protected] for limited time discounts. Izenda Maps even has rich drill-down capabilities that allow you to dive deeper with a simple hover (also requires dashboards). 2. Streamlined Pie Charts with "Other" Slices The advanced properties of the Pie Chart now allows you to combine the smaller slices into a single "Other" slice. This reduces the visual complexity without throwing off the scale of the chart. Compare the difference below. 3. Combined Bar + Line Charts The Bar chart now allows dual visualization of multiple metrics simultaneously by adding a line for secondary data. Enabled via AdHocSettings.AllowLineOnBar = true; 4. Stacked Bar Charts The stacked bar chart lets you see a breakdown of a measure based on categorical data.  It is enabled with the following code. AdHocSettings.AllowStackedBarChart = true; 5. Self-Joining Data Sources The self-join features allows for parent-child relationships to be accessed from the Data Sources tab. The same table can be used as a secondary child table within the Report Designer. 6. Report Design From Dashboard View Dashboards now sport both view and design icons to allow quick access to both. 7. Field Arithmetic on Dates Differences between dates can now be used as measures with the arithmetic feature. 8. Simplified Multi-Tenancy Integrating with multi-tenant systems is now easier than ever. The following APIs have been added to facilitate common scenarios. AdHocSettings.CurrentUserTenantId = value; AdHocSettings.SchedulerTenantID = value; AdHocSettings.SchedulerTenantField = "AccountID"; 9. Support For SQL 2008 R2 and SQL Azure Izenda now supports the latest version of Microsoft's database as well as the SQL Azure service. 10. Enhanced Performance and Compatibility for Stored Procedures Izenda now supports more stored procedures than ever and runs them faster too.

  Read the article

• Where are my sub templates?

  - by Tim Dexter

  This one is for standalone/BIEE uses of Publisher. All the ERP/CRM/HCM folks are already catered for and can tuck into a nut cutlet and arugala salad. Sorry, I have just watched Food Inc and even if only half of it is true; Im still on a crusade in my house against mass produced food. Wake up World! If you have ventured into the world of sub templating, you'll be reaping some development benefit. In terms of shared report components and calculations they are very useful. Just exporting all of your report headers and footers to a single sub template can potentially save you hours and hours of work and make you look like a star. If someone in management gets it into their head that they would like Comic San Serif font rather than Arial in their report headers, its a 10 min job rather than 100 hours! What about the rest of the report content? I hear you cry. Its coming in 11g, full master template support. Your management wants bright blue borders with yellow backgrounds for all the tables in your reports, 5 minute job! Getting back to sub templates and my comment about all the ERP/CRM/HCM folks be catered for. In the standalone release there is no out of the box directory for you to drop your sub templates. Dropping them into the main report directory would make sense but they are not accessible there via a URL. An oversight on our part and something that will be addressed in 11g. Sub templates are now a first class citizen in the world of BIP, you can upload them and BIP will know what to do with them. But what do you do right now? The easiest place to put them where BIP can 'see' them is to create a directory under the xmlpserver install directory in the J2EE container e.g. $J2EE_HOME/xmlpserver/xmlpserver/subtemplates You can call it whatever you want but when the server is started up, that directory is accessible via a URL i.e. http://tdexter:9704/xmlpserver/subtemplates/mysub.rtf. You can therefore put it into the top of your main templates and call the sub template. <?import: http://tdexter:9704/xmlpserver/subtemplates/mysub.rtf?> Of course, you can drop them anywhere you want, they just need to be in a web server mountable directory. Enjoy the arugala!

  Read the article

• How do you play or record audio (to .WAV) on Linux in C++? [closed]

  - by Jacky Alcine

  Hello, I've been looking for a way to play and record audio on a Linux (preferably Ubuntu) system. I'm currently working on a front-end to a voice recognition toolkit that'll automate a few steps required to adapt a voice model for PocketSphinx and Julius. Suggestions of alternative means of audio input/output are welcome, as well as a fix to the bug shown below. Here is the current code I've used so far to play a .WAV file: void Engine::sayText ( const string OutputText ) { string audioUri = "temp.wav"; string requestUri = this->getRequestUri( OPENMARY_PROCESS , OutputText.c_str( ) ); int error , audioStream; pa_simple *pulseConnection; pa_sample_spec simpleSpecs; simpleSpecs.format = PA_SAMPLE_S16LE; simpleSpecs.rate = 44100; simpleSpecs.channels = 2; eprintf( E_MESSAGE , "Generating audio for '%s' from '%s'..." , OutputText.c_str( ) , requestUri.c_str( ) ); FILE* audio = this->getHttpFile( requestUri , audioUri ); fclose(audio); eprintf( E_MESSAGE , "Generated audio."); if ( ( audioStream = open( audioUri.c_str( ) , O_RDONLY ) ) < 0 ) { fprintf( stderr , __FILE__": open() failed: %s\n" , strerror( errno ) ); goto finish; } if ( dup2( audioStream , STDIN_FILENO ) < 0 ) { fprintf( stderr , __FILE__": dup2() failed: %s\n" , strerror( errno ) ); goto finish; } close( audioStream ); pulseConnection = pa_simple_new( NULL , "AudioPush" , PA_STREAM_PLAYBACK , NULL , "openMary C++" , &simpleSpecs , NULL , NULL , &error ); for (int i = 0;;i++ ) { const int bufferSize = 1024; uint8_t audioBuffer[bufferSize]; ssize_t r; eprintf( E_MESSAGE , "Buffering %d..",i); /* Read some data ... */ if ( ( r = read( STDIN_FILENO , audioBuffer , sizeof (audioBuffer ) ) ) <= 0 ) { if ( r == 0 ) /* EOF */ break; eprintf( E_ERROR , __FILE__": read() failed: %s\n" , strerror( errno ) ); if ( pulseConnection ) pa_simple_free( pulseConnection ); } /* ... and play it */ if ( pa_simple_write( pulseConnection , audioBuffer , ( size_t ) r , &error ) < 0 ) { fprintf( stderr , __FILE__": pa_simple_write() failed: %s\n" , pa_strerror( error ) ); if ( pulseConnection ) pa_simple_free( pulseConnection ); } usleep(2); } /* Make sure that every single sample was played */ if ( pa_simple_drain( pulseConnection , &error ) < 0 ) { fprintf( stderr , __FILE__": pa_simple_drain() failed: %s\n" , pa_strerror( error ) ); if ( pulseConnection ) pa_simple_free( pulseConnection ); } } NOTE: If you want the rest of the code to this file, you can download it here directly from Launchpad.

  Read the article

• Fast Data: Go Big. Go Fast.

  - by J Swaroop

  Cross-posting Dain Hansen's excellent recap of the Big Data/Fast Data announcement during OOW: For those of you who may have missed it, today’s second full day of Oracle OpenWorld 2012 started with a rumpus. Joe Tucci, from EMC outlined the human face of big data with real examples of how big data is transforming our world. And no not the usual tried-and-true weblog examples, but real stories about taxi cab drivers in Singapore using big data to better optimize their routes as well as folks just trying to get a better hair cut. Next we heard from Thomas Kurian who talked at length about the important platform characteristics of Oracle’s Cloud and more specifically Oracle’s expanded Cloud Services portfolio. Especially interesting to our integration customers are the messaging support for Oracle’s Cloud applications. What this means is that now Oracle’s Cloud applications have a lightweight integration fabric that on-premise applications can communicate to it via REST-APIs using Oracle SOA Suite. It’s an important element to our strategy at Oracle that supports this idea that whether your requirements are for private or public, Oracle has a solution in the Cloud for all of your applications and we give you more deployment choice than any vendor. If this wasn’t enough to get the juices flowing, later that morning we heard from Hasan Rizvi who outlined in his Fusion Middleware session the four most important enterprise imperatives: Social, Mobile, Cloud, and a brand new one: Fast Data. Today, Rizvi made an important step in the definition of this term to explain that he believes it’s a convergence of four essential technology elements: Event Processing for event filtering, business rules – with Oracle Event Processing Data Transformation and Loading - with Oracle Data Integrator Real-time replication and integration – with Oracle GoldenGate Analytics and data discovery – with Oracle Business Intelligence Each of these four elements can be considered (and architect-ed) together on a single integrated platform that can help customers integrate any type of data (structured, semi-structured) leveraging new styles of big data technologies (MapReduce, HDFS, Hive, NoSQL) to process more volume and variety of data at a faster velocity with greater results.  Fast data processing (and especially real-time) has always been our credo at Oracle with each one of these products in Fusion Middleware. For example, Oracle GoldenGate continues to be made even faster with the recent 11g R2 Release of Oracle GoldenGate which gives us some even greater optimization to Oracle Database with Integrated Capture, as well as some new heterogeneity capabilities. With Oracle Data Integrator with Big Data Connectors, we’re seeing much improved performance by running MapReduce transformations natively on Hadoop systems. And with Oracle Event Processing we’re seeing some remarkable performance with customers like NTT Docomo. Check out their upcoming session at Oracle OpenWorld on Wednesday to hear more how this customer is using Event processing and Big Data together. If you missed any of these sessions and keynotes, not to worry. There's on-demand versions available on the Oracle OpenWorld website. You can also checkout our upcoming webcast where we will outline some of these new breakthroughs in Data Integration technologies for Big Data, Cloud, and Real-time in more details.

  Read the article

• grub problem after grub-repair

  - by alireza

  I had two OS,win 7 and Ubuntu, I was working with win and went out of the room and when came back I saw Grub Rescue!!! I booted live and did grub_repaire and it still says multiple active partitions.operating system not found I feel that it can not find the ubuntu hard drive at all! ! ubuntu@ubuntu:/dev$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xde771741 Device Boot Start End Blocks Id System /dev/sda1 * 61 61 0 0 Empty /dev/sda2 2048 30146559 15072256 27 Hidden NTFS WinRE /dev/sda3 * 30146560 30351359 102400 7 HPFS/NTFS/exFAT /dev/sda4 30351360 334483299 152065970 7 HPFS/NTFS/exFAT ubuntu@ubuntu:/dev$ ls autofs dvdrw loop4 ppp ram5 shm tty15 tty29 tty42 tty56 ttyS10 ttyS24 uinput vcsa1 block ecryptfs loop5 psaux ram6 snapshot tty16 tty3 tty43 tty57 ttyS11 ttyS25 urandom vcsa2 bsg fb0 loop6 ptmx ram7 snd tty17 tty30 tty44 tty58 ttyS12 ttyS26 usbmon0 vcsa3 btrfs-control fd loop7 pts ram8 sr0 tty18 tty31 tty45 tty59 ttyS13 ttyS27 usbmon1 vcsa4 bus full loop-control ram0 ram9 stderr tty19 tty32 tty46 tty6 ttyS14 ttyS28 usbmon2 vcsa5 cdrom fuse mapper ram1 random stdin tty2 tty33 tty47 tty60 ttyS15 ttyS29 v4l vcsa6 cdrw fw0 mcelog ram10 rfkill stdout tty20 tty34 tty48 tty61 ttyS16 ttyS3 vcs vcsa7 char hpet mei ram11 rtc tty tty21 tty35 tty49 tty62 ttyS17 ttyS30 vcs1 vga_arbiter console input mem ram12 rtc0 tty0 tty22 tty36 tty5 tty63 ttyS18 ttyS31 vcs2 video0 core kmsg net ram13 sda tty1 tty23 tty37 tty50 tty7 ttyS19 ttyS4 vcs3 zero cpu log network_latency ram14 sda2 tty10 tty24 tty38 tty51 tty8 ttyS2 ttyS5 vcs4 cpu_dma_latency loop0 network_throughput ram15 sda3 tty11 tty25 tty39 tty52 tty9 ttyS20 ttyS6 vcs5 disk loop1 null ram2 sda4 tty12 tty26 tty4 tty53 ttyprintk ttyS21 ttyS7 vcs6 dri loop2 oldmem ram3 sg0 tty13 tty27 tty40 tty54 ttyS0 ttyS22 ttyS8 vcs7 dvd loop3 port ram4 sg1 tty14 tty28 tty41 tty55 ttyS1 ttyS23 ttyS9 vcsa ubuntu@ubuntu:/dev$ someone said { Remove the boot flag from sda1, by typing in a terminal: sudo fdisk /dev/sda1 Then press the 'a' key, and 'Enter'. Then press the '1' key, and 'Enter'. Then press the 'w' key, and 'Enter'. } but after grub-repair I got this log: http://paste.ubuntu.com/1371297/ then I try sudo fdisk /dev/sda1 and But It says unable to open /dev/sda1! which is right as sda1 is not in dev folder (look at the picture!) Can anybody help me? I need to work on my windows for the rest of the semester and don't care of my ubuntu. thank you

  Read the article

• Follow the How-To Geek Writers on Twitter

  - by The Geek

  Ever wonder what the How-To Geek writers are up to? If you’re a Twitter user, you can connect with us directly. We’ve also setup a new @howtogeeknews account if you just want to keep up with the latest articles. So if you want just the latest articles… click the image below and then click the Follow button. Otherwise, if you’d like to connect with the rest of us that actually use Twitter, you can follow each of us separately through  the links below. Note: Let’s try to stick to discussion, and leave the tech support questions for our forum. the How-To Geek (that’s me!) -  @howtogeek Matthew Guay – @maguay Trevor Bekolay – @TrevorBekolay Asian Angel – @asian_angel  Andrew Gehman – @andrewgehman Some of the HTG writers are not currently using Twitter… but I’m gonna list their accounts just in case you wanted to follow them. Mark Virtue – @markvirtue Mysticgeek – @mysticgeek  (He’s far too productive to waste time on Twitter!) Enjoy the conversation! Similar Articles Productive Geek Tips Got Awesome Geek Skills? The How-To Geek is Looking for WritersGot Awesome Skills? Why Not Write for How-To Geek?Integrate Twitter With Microsoft OutlookState of the Geek 2009: Behind the Scenes and Other GeekeryAnnouncing the How-To Geek Blogs TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses Mashpedia is a Real-time Encyclopedia

  Read the article

• Advice on designing a robust program to handle a large library of meta-information & programs

  - by Sam Bryant

  So this might be overly vague, but here it is anyway I'm not really looking for a specific answer, but rather general design principles or direction towards resources that deal with problems like this. It's one of my first large-scale applications, and I would like to do it right. Brief Explanation My basic problem is that I have to write an application that handles a large library of meta-data, can easily modify the meta-data on-the-fly, is robust with respect to crashing, and is very efficient. (Sorta like the design parameters of iTunes, although sometimes iTunes performs more poorly than I would like). If you don't want to read the details, you can skip the rest Long Explanation Specifically I am writing a program that creates a library of image files and meta-data about these files. There is a list of tags that may or may not apply to each image. The program needs to be able to add new images, new tags, assign tags to images, and detect duplicate images, all while operating. The program contains an image Viewer which has tagging operations. The idea is that if a given image A is viewed while the library has tags T1, T2, and T3, then that image will have boolean flags for each of those tags (depending on whether the user tagged that image while it was open in the Viewer). However, prior to being viewed in the Viewer, image A would have no value for tags T1, T2, and T3. Instead it would have a "dirty" flag indicating that it is unknown whether or not A has these tags or not. The program can introduce new tags at any time (which would automatically set all images to "dirty" with respect to this new tag) This program must be fast. It must be easily able to pull up a list of images with or without a certain tag as well as images which are "dirty" with respect to a tag. It has to be crash-safe, in that if it suddenly crashes, all of the tagging information done in that session is not lost (though perhaps it's okay to loose some of it) Finally, it has to work with a lot of images (10,000) I am a fairly experienced programmer, but I have never tried to write a program with such demanding needs and I have never worked with databases. With respect to the meta-data storage, there seem to be a few design choices: Choice 1: Invidual meta-data vs centralized meta-data Individual Meta-Data: have a separate meta-data file for each image. This way, as soon as you change the meta-data for an image, it can be written to the hard disk, without having to rewrite the information for all of the other images. Centralized Meta-Data: Have a single file to hold the meta-data for every file. This would probably require meta-data writes in intervals as opposed to after every change. The benefit here is that you could keep a centralized list of all images with a given tag, ect, making the task of pulling up all images with a given tag very efficient

  Read the article

• Subterranean IL: Exception handler semantics

  - by Simon Cooper

  In my blog posts on fault and filter exception handlers, I said that the same behaviour could be replicated using normal catch blocks. Well, that isn't entirely true... Changing the handler semantics Consider the following: .try { .try { .try { newobj instance void [mscorlib]System.Exception::.ctor() // IL for: // e.Data.Add("DictKey", true) throw } fault { ldstr "1: Fault handler" call void [mscorlib]System.Console::WriteLine(string) endfault } } filter { ldstr "2a: Filter logic" call void [mscorlib]System.Console::WriteLine(string) // IL for: // (bool)((Exception)e).Data["DictKey"] endfilter }{ ldstr "2b: Filter handler" call void [mscorlib]System.Console::WriteLine(string) leave.s Return } } catch object { ldstr "3: Catch handler" call void [mscorlib]System.Console::WriteLine(string) leave.s Return } Return: // rest of method If the filter handler is engaged (true is inserted into the exception dictionary) then the filter handler gets engaged, and the following gets printed to the console: 2a: Filter logic 1: Fault handler 2b: Filter handler and if the filter handler isn't engaged, then the following is printed: 2a:Filter logic 1: Fault handler 3: Catch handler Filter handler execution The filter handler is executed first. Hmm, ok. Well, what happens if we replaced the fault block with the C# equivalent (with the exception dictionary value set to false)? .try { // throw exception } catch object { ldstr "1: Fault handler" call void [mscorlib]System.Console::WriteLine(string) rethrow } we get this: 1: Fault handler 2a: Filter logic 3: Catch handler The fault handler is executed first, instead of the filter block. Eh? This change in behaviour is due to the way the CLR searches for exception handlers. When an exception is thrown, the CLR stops execution of the thread, and searches up the stack for an exception handler that can handle the exception and stop it propagating further - catch or filter handlers. It checks the type clause of catch clauses, and executes the code in filter blocks to see if the filter can handle the exception. When the CLR finds a valid handler, it saves the handler's location, then goes back to where the exception was thrown and executes fault and finally blocks between there and the handler location, discarding stack frames in the process, until it reaches the handler. So? By replacing a fault with a catch, we have changed the semantics of when the filter code is executed; by using a rethrow instruction, we've split up the exception handler search into two - one search to find the first catch, then a second when the rethrow instruction is encountered. This is only really obvious when mixing C# exception handlers with fault or filter handlers, so this doesn't affect code written only in C#. However it could cause some subtle and hard-to-debug effects with object initialization and ordering when using and calling code written in a language that can compile fault and filter handlers.

  Read the article

• How to refactor a Python “god class”?

  - by Zearin

  Problem I’m working on a Python project whose main class is a bit “God Object”. There are so friggin’ many attributes and methods! I want to refactor the class. So Far… For the first step, I want to do something relatively simple; but when I tried the most straightforward approach, it broke some tests and existing examples. Basically, the class has a loooong list of attributes—but I can clearly look over them and think, “These 5 attributes are related…These 8 are also related…and then there’s the rest.” getattr I basically just wanted to group the related attributes into a dict-like helper class. I had a feeling __getattr__ would be ideal for the job. So I moved the attributes to a separate class, and, sure enough, __getattr__ worked its magic perfectly well… At first. But then I tried running one of the examples. The example subclass tries to set one of these attributes directly (at the class level). But since the attribute was no longer “physically located” in the parent class, I got an error saying that the attribute did not exist. @property I then read up about the @property decorator. But then I also read that it creates problems for subclasses that want to do self.x = blah when x is a property of the parent class. Desired Have all client code continue to work using self.whatever, even if the parent’s whatever property is not “physically located” in the class (or instance) itself. Group related attributes into dict-like containers. Reduce the extreme noisiness of the code in the main class. For example, I don’t simply want to change this: larry = 2 curly = 'abcd' moe = self.doh() Into this: larry = something_else('larry') curly = something_else('curly') moe = yet_another_thing.moe() …because that’s still noisy. Although that successfully makes a simply attribute into something that can manage the data, the original had 3 variables and the tweaked version still has 3 variables. However, I would be fine with something like this: stooges = Stooges() And if a lookup for self.larry fails, something would check stooges and see if larry is there. (But it must also work if a subclass tries to do larry = 'blah' at the class level.) Summary Want to replace related groups of attributes in a parent class with a single attribute that stores all the data elsewhere Want to work with existing client code that uses (e.g.) larry = 'blah' at the class level Want to continue to allow subclasses to extend, override, and modify these refactored attributes without knowing anything has changed Is this possible? Or am I barking up the wrong tree?

  Read the article

• Retreiving upcoming calendar events from a Google Calendar

  - by brian_ritchie

  Google has a great cloud-based calendar service that is part of their Gmail product.  Besides using it as a personal calendar, you can use it to store events for display on your web site.  The calendar is accessible through Google's GData API for which they provide a C# SDK. Here's some code to retrieve the upcoming entries from the calendar:  .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public class CalendarEvent 2: { 3: public string Title { get; set; } 4: public DateTime StartTime { get; set; } 5: } 6:   7: public class CalendarHelper 8: { 9: public static CalendarEvent[] GetUpcomingCalendarEvents 10: (int numberofEvents) 11: { 12: CalendarService service = new CalendarService("youraccount"); 13: EventQuery query = new EventQuery(); 14: query.Uri = new Uri( 15: "http://www.google.com/calendar/feeds/userid/public/full"); 16: query.FutureEvents = true; 17: query.SingleEvents = true; 18: query.SortOrder = CalendarSortOrder.ascending; 19: query.NumberToRetrieve = numberofEvents; 20: query.ExtraParameters = "orderby=starttime"; 21: var events = service.Query(query); 22: return (from e in events.Entries select new CalendarEvent() 23: { StartTime=(e as EventEntry).Times[0].StartTime, 24: Title = e.Title.Text }).ToArray(); 25: } 26: } There are a few special "tricks" to make this work: "SingleEvents" flag will flatten out reoccurring events "FutureEvents", "SortOrder", and the "orderby" parameters will get the upcoming events. "NumberToRetrieve" will limit the amount coming back  I then using Linq to Objects to put the results into my own DTO for use by my model.  It is always a good idea to place data into your own DTO for use within your MVC model.  This protects the rest of your code from changes to the underlying calendar source or API.

  Read the article

• Simple heart container script for 2D game (Unity)?

  - by N1ghtshade3

  I'm attempting to create a simple mobile game (C#) that involves a simple three-heart life system. After searching for hours online, many of the solutions use OnGUI (which is apparently horrible for performance) and the rest are too complicated for me to understand and add to my code. The other solutions involve using a single texture and just hiding part of it when damage is taken. In my game, however, the player should be able to go over three hearts (for example, every 100 points). Sebastian Lague's Zelda-Style Health is what I'm looking for, but even though it's a tutorial there is way too much going on that I don't need or can't customize to fit in mine. What I have so far is a script called HealthScript.cs which contains a variable lives. I have another script, PlayerPhysics.cs which calls HealthScript and subtracts a life when an enemy is hit. The part I don't get is actually drawing the hearts. I think I understand what needs to happen, I just am not experienced enough with Unity to know how. The Start function should draw three (or whatever lives is set to) hearts in the top right corner. Since the game should be resolution-independent to accommodate the various sizes of Android devices, I'd rather use scaling rather than PixelInset. When the player hits an enemy as detected by PlayerPhysics.cs, it should subtract from lives. I think that I have this working using this.GetComponent<HealthScript>().lives -= 1 but I'm not sure if it actually works. This should trigger a redraw of the hearts so that there are now two hearts. The same principle would apply for adding hearts when a score is reached, except when lives > maxHeartsPerRow, the new hearts should be drawn below the old ones. I realise I don't have much code to show but believe me; I've tried for quite some time to figure this out and have little to show for it. Any help at all would be welcome; it seems like it shouldn't take that much code to put an image on the screen for each life there is, but I haven't found anything yet. Thanks!

  Read the article

• Rant on EDI

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2013/06/27/153261.aspxMy post this month is a rant and not something informational. I hope y'all will forgive me.It's been a slow month. I was on vacation with my daughter for the middle part of the month. And the rest of my time has been preparing for a major ERP upgrade, and dealing with a last minute surprise from a customer that has EDI changes.The subject of EDI is my rant. I was tossed into EDI years ago by the same customer. I understood the basic concepts, but not details -- implementation or otherwise. I started with my network including a couple of people with EDI experience. And for one that was all she did. She was my first taste of what seems to be a protected group.I started looking for the standards with a budget in mind, or rather a lack of budget. See whenever someone stone walls you like that it tells me that what they're doing isn't as mystical as they'd like you to believe. Real magic doesn't need to be kept secret. And that is the case with EDI; however, the EDI industry tries to protect it. You cannot even download the standards. They cost thousands of dollars.All this does is ensure that they continue to rack up consulting dollars from their ignorant clients. Well sirs and madams, I put my finger in your eye. I developed my own translator. And while it's not robust enough to resell due to the limited scope of information I could gather. It did save my employer tens if not over a hundred thousand dollars.My public service message, therefore is as follows. Don't be afraid to tackle implementing EDI if you're even a semi-competent developer. You need some experience parsing, familiarity with your business system, and a little patience. Also, pick your VAN well. Don't fall into the trap of thinking that the biggest names are the best choice. That was a costly mistake for us that we are stuck with for a couple more years.

  Read the article

• Speaking at Mix11

  - by Dennis Vroegop

  In April Microsoft will hold the next MIX event. MIX was usually targeted at web designers and developers but has grown over the years to be more a general conference focused on the web and devices. In other words: everything the normal consumer might encounter. It’s not your typical developers conference, although you’ll find many developers there as well. But next to the developers you’ll probably run into designers and user experience specialists as well. This year I am proud to say that I will be one of the people presenting there. Together with all the Surface MVP’s in the world (sounds impressive, but there are only 7 of us) we’ll host a panel discussion on all things Surface, NUI and everything else that matches those subjects. Here’s what the abstract says: The Natural User Interface (NUI) is a hot topic that generates a lot of excitement, but there are only a handful of companies doing real innovation with NUIs and most of the practical experience in the NUI style of design and development is limited to a small number of experts. The Microsoft Surface MVPs are a subset of these experts that have extensive real-world experience with Microsoft Surface and other NUI devices. This session is a panel featuring the Microsoft Surface MVPs and an unfiltered discussion with each other and the audience about the state of the art in NUI design and development. We will share our experiences and ideas, discuss what we think NUI will look like in the near future, and back up our statements with cutting-edge demonstrations prepared by the panelists involving combinations of Microsoft Surface 2.0, Kinect, and Windows Phone 7. We, as Surface MVPs think we are more than just Surface oriented. We like to think we are more NUI MVP’s. But since that’s not a technology with Microsoft you can’t actually become a NUI MVP so Surface is the one that comes the closest. We are currently working on the details of our session but believe me: it will blow you away. Several people we talked to have said this could potentially be the best session of Mix. Quite a challenge, but we’re up for it! Of course I won’t be telling you exactly what we’re going to do in Las Vegas but rest assured that when you visit our session you’ll leave with a lot of new ideas and hopefully be inspired to bring into practice what you’ve seen. Even if the technology we’ll show you isn’t readily available yet. So, if you are in Las Vegas between April 12th and 14th, please join Joshua Blake, Neil Roodyn, Rick Barraza, Bart Roozendaal, Josh Santangelo, Nicolas Calvi and myself for some NUI fun! See you in Vegas! Tags van Technorati: mix11,las vegas,surface,nui,kinecct

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >