Search Results

Search found 4477 results on 180 pages for 'wireless keyboards'.

Page 154/180 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Printer recommendation

  - by Coding District

  Hi guys, I'm looking to buy a printer for home use and I'm not sure which one to get. I'm not very good when it comes to printers. Here's what I'm looking for: cheap (least $ per page) good quality (last longest, any specific brands to avoid?) not heavy printing (let's say ~5 pages per week) OK quality (I don't need "the best". I'm not going to print any photos but will need color) can scan, fax, and print I'm currently looking at these two since it's boxing day tomorrow and they're on sale: http://www.bestbuy.ca/EN-CA/product/id/10155178.aspx http://www.bestbuy.ca/en-CA/product/hewlett-packard-hp-officejet-wireless-all-in-one-inkjet-printer-4500-wl-4500-wl/10146663.aspx?path=14c256643988a02e34424eec10028145en02 Can I get some opinions about the above?

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear)

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do?

  Read the article

• Configure browser and VPN traffic

  - by Zachzor

  Hello everyone. I've been having a few issues with my company's VPN server. The VPN is running on a Mac Server (10.6.x) and I'm also using a Macbook (10.6.5). I've been building specific programs to gather information from IPs, and to work on this while I'm at home I need to go through our VPN to access the network. Unless I send all traffic over VPN, I'm not able to hit those specific IPs. However, I'm unable to access the internet through my web browser when I send all my traffic over VPN. I was wondering if there was a way (besides setting up a split tunnel) that I could set up a web browser to go through my current wireless connection, as opposed to going through the VPN like the rest of my applications. Wether the browser be Chrome, Firefox, or Safari doesn't matter to me. Anyone else run into this issue and find a clever way to solve it? Thank you!

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• Windows 7 Intermittent Connection Issues (Continuously "identifying")

  - by andrewktmeikle

  I have an issue solely with my desktop windows 7 machine on my network (the network has multiple different devices, on the same and different operating systems) and the issue is that irregularly, although sometimes frequently, I briefly get disconnected from the internet (briefly is for around 5-10 seconds). However, I never loose the bars on the wifi thing, eg I don't get the yellow triangle, but it goes to the identifying stage and then reconnects. The reason I noticed the problem was when I was streaming music it would stop and I would refresh the page and it would start working again ( turned out it was because it took that amount of time to get connected again). So my question is, what would cause the intermittent issues and start the "identifying" process again. I don't think its my router, because no one else is having problems, so the other option is that its a problem specifically with my machine. I'm connecting to a Netgear DG834GT router, and I'm using a Edimax Wireless-N150 USB Adapter. Anyone have any ideas?

  Read the article

• Spoof MAC address in Windows 7: Bypass

  - by lpd

  I am trying to spoof the MAC address of my new Win7 laptop. To do so I tried specifying an alternate value from the Device Manager which took no effect. I also tried from the registry, as per other threads here, to no avail. Interestingly I also found the registry contained a path 000X\Ndi\params\NetworkAddress\default REG_SZ, but changing that had no effect either :( I can only guess I share the same issue here: http://forums.anandtech.com/showthread.php?t=2096480 as the wireless adaptor is the same brand bundled with the same operating system. So my question is - is there anything better I can do to achieve a spoofed physical address than rollback the drivers to some older version?

  Read the article

• aireplay - reading but not sending

  - by oneat

  I'm trying aircrack injection, everything is working I authenticated, but aireplay is not working aireplay-ng -3 -b 00:12:2A:01:74:05 -h 78:e4:00:87:71:8b mon0 18:53:03 Waiting for beacon frame (BSSID: 00:12:2A:01:74:05) on channel 7 Saving ARP requests in replay_arp-0817-185303.cap You should also start airodump-ng to capture replies. Read 4988 packets (0 ARPs, 4 ACKs), sent 0 packets...(0 pps) Why isn't it working? Why isn't it sending packets? 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) I tested injection on injection test in aircrack tutorial, despite driver wasn't patched.

  Read the article

• No Drivers in Ubuntu 9.10

  - by Chris

  I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• D Link DSL G624T Router will work wirelessly but not via cable

  - by Andy Fensome

  I have a D Link router which works in providing a wireless internet connection for my main PC and secondary notebook. I have been advised that the internet connection to the main pc will be better if I wire the router directly to the PC. I have tried this and can not get a connection. I just keep getting the message network cable unplugged. I have had the ethernet adaptor checked out on the pc and the cable is good ( also checked out). Anything I can do or do I have a bad router. I have tried the cable in all 4 ports and the message is still the same.

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• bat file to disable ethernet adaptor and then reenable it after windows log in

  - by jaslr

  When I log into Windows 7 I need to wait 10 seconds and then disable the Local Area Connection (ethernet adaptor) and then reenable it. I have looked through the suggested answer: Enable/disable wireless interface in a bat file but that seems irrelevant as it just toggles the current state. From what I can tell I need to include: netsh interface set interface "Local Area Connection" DISABLED netsh interface set interface "Local Area Connection" ENABLED but I'm unsure of the wait time or how I can have this start after Windows has successfully logged in. What's the best approach here?

  Read the article

• Best way to "stream" music / video to my HDTV from my pc?

  - by loj

  My requirement is simple: I have a laptop and a desktop at home that I often use for various media (music, videos etc.) and I want to know what the best (quickest, most seamless, best quality etc) solution for sending this media to my HDTV (and connected sound system). An example would be I'm listening to some music from youtube on my laptop in my living room and want to quickly send it to my tv (which has a sound system) so that I don't have to listen to it through my laptop. I mainly use linux (but a windows dependent solution would be ok too if its the best option). I would greatly appreciate any suggestions. Oh and a wireless solution would be best.

  Read the article

• How can I connect a wired PC to the internet through my Macs wifi connection?

  - by David Weitz

  So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• Can't access the Internet in VMware Workstation

  - by asunnysunday

  I'm using VMware 7.1.2 in Windows 7 with Ubuntu 11.04 as a guest OS. In the host OS (Windows 7), I can access the Internet without any problems but in the virtual machine I can't access the Internet. I've tried the following but with no success: Use all methods of connecting to the Internet in "Virtual Machine Settings": Bridged, NAT, Custom; none work. Used cabled and wireless connections on the PC - neither of them work. I've used Ubuntu in VMware for several months - previously the Internet was always accessible. Could the cause of this be because I upgraded to Ubuntu 11.04?

  Read the article

• How can I set a network connection as metered?

  - by Sam

  I would like to set a network connection as metered. I can't find how to do this; it seems to have changed in the upgrade from Windows 8 to 8.1. I tried following the steps in the official metered connection FAQ. However, when I open the connection, there is no Data Usage heading nor a Set as a metered connection option. I tried this on two different computers, both running Windows 8.1. I also tried doing this for both wireless and ethernet adaptors. Here's what the connection screen looks like. I've cropped the empty space from the image. How can I set the connection to metered?

  Read the article

• Remote HTTP to FTP

  - by jamd12

  I am on a very slow download with the internet that I have and unfortunately I only have access to expensive and slow wireless or satelite. I have set up an FTP with a computer supplier locally who has a nice 2 Mbps speed and am trying to set up a way of adding links remotely (Hotfile, rapidshare, Fileserve, etc.) so that they can be downloaded onto the FTP and then transfered a few times a week manually onto a portable HDD. On my home PC I use Internet download manager for all my downloads. Is there a simple way that I can add links remotely to Internet Download Manager on the FTP or perhaps another solution? The OS on the FTP is Linux - I use Windows XP SP3 and Windows 7. I have not used FTP very much before so any suggestions on how best to do this would be much appreciated.

  Read the article

• Ubuntu 10.4 No internet

  - by Keeper780

  I have Ubuntu 10.4 dual booted with Windows Vista on a work Lenovo R61 laptop. The home and work wireless connection were working fine. I lost all internet connection at work. The IT guy clearly knew nothing about Linux. Since he 'fixed' it get nothing, no wlan signal the Network manager icon was gone, no internet. I still have the live disc and if I run from the live disc the connections are there and everything works perfectly. How do I restore the internet easily on my laptop. I have been using Linux for 3 Years but I am still a bit of a newbie, this is the first major problem I've had in three years. It's driving me nuts. Thanks

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Kernel Compiling from Vanilla to several machines

  - by Linux Pwns Mac

  When compiling kernels for machines is there a safe or correct way to create a template for say servers? I work with a lot of RHEL servers and want to compile them with GRSEC. However, I do not wish to always rebuild off of the .config for each machine and go in and remove a bunch of unrelated modules like wireless, bluetooth, ect... which you typically do not need in servers. I want to create a template .config that can be used on any machine, but is there a safe way to do that when hardware changes? I know with Linux, at least from my experience, you can cross jump hardware way easier then Windows/OSX. I assume that as long as I leave MOST of all the main hardware modules/CPU in that this could create a .config that would work for all or just about any machine?

  Read the article

• Sharing files between multiple computers?

  - by Koalatea

  At my school, we have 13 iMacs that we use to make our yearbook. Currently our school has some servers for us, but since we work with so many files ( thousands of pictures, most of which are ~3MB ) it slows down far too much. Is there a way to better share files between our computers? We are on a wireless network and the whole school shares the same servers, we have around probably 400 computers in the school. Is there a hardware fix I can do? Something like buying an external and hooking only yearbook computers to it?

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >