Search Results

Search found 10010 results on 401 pages for 'a b testing'.

Page 155/401 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Why does this rsnapshot exclude not work?

  - by bstpierre

  Rsnapshot passes excludes directly to rsync, but rsync's behavior appears inconsistent. I've simplified my rsnapshot backup test to the following directory tree (this tree will be backed up): gorilla:~# find /tmp/snaptest -exec file {} \; /tmp/snaptest: directory /tmp/snaptest/SKIPTHIS: directory /tmp/snaptest/SKIPTHIS/xyz: directory /tmp/snaptest/SKIPTHIS/xyz/testing: ASCII text /tmp/snaptest/SKIPTHIS/bar: ASCII text /tmp/snaptest/SKIPTHIS/foo: ASCII text /tmp/snaptest/SKIPTHIS.txt: ASCII text My config file: config_version 1.2 snapshot_root /tmp/backup-media no_create_root 1 cmd_cp /bin/cp cmd_rm /bin/rm cmd_rsync /usr/bin/rsync cmd_ssh /usr/bin/ssh cmd_logger /usr/bin/logger cmd_du /usr/bin/du interval hourly 6 interval daily 7 interval weekly 4 interval monthly 3 verbose 3 loglevel 3 logfile /media/maxtor-one-touch/rsnapshot.log lockfile /media/maxtor-one-touch/backups/.rsnapshot.pid rsync_short_args -a rsync_long_args --delete --numeric-ids --relative --delete-excluded exclude "SKIPTHIS/**" link_dest 1 backup /tmp/snaptest snaptest The result: gorilla:~# rsnapshot -c /tmp/snaptest.conf hourly echo 12638 > /media/maxtor-one-touch/backups/.rsnapshot.pid mkdir -m 0755 -p /tmp/backup-media/hourly.0/ /usr/bin/rsync -a --delete --numeric-ids --relative --delete-excluded \ --exclude="SKIPTHIS/**" /tmp/snaptest \ /tmp/backup-media/hourly.0/snaptest touch /tmp/backup-media/hourly.0/ rm -f /media/maxtor-one-touch/backups/.rsnapshot.pid gorilla:~# find /tmp/backup-media/ -exec file {} \; /tmp/backup-media/: directory /tmp/backup-media/hourly.0: directory /tmp/backup-media/hourly.0/snaptest: directory /tmp/backup-media/hourly.0/snaptest/tmp: sticky directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/xyz: directory /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/xyz/testing: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/bar: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS/foo: ASCII text /tmp/backup-media/hourly.0/snaptest/tmp/snaptest/SKIPTHIS.txt: ASCII text My confusion stems from the fact that if I copy-paste the rsync command echoed by rsnapshot, the SKIPTHIS directory is excluded! (I've tested with various other SKIPTHIS patterns with the same results.) Any idea what's going on?

  Read the article

• Install Apache + PHP on CentOS server

  - by Scott

  Hi everyone, I am trying to use YUM to install Apache and PHP on CentOS but keep getting these errors. Anyone know what's wrong? Thanks! Loading mirror speeds from cached hostfile * c5-testing: dev.centos.org Setting up Install Process Parsing package install arguments Resolving Dependencies --> Running transaction check ---> Package httpd.i386 0:2.2.8-1.el5s2.centos set to be updated --> Finished Dependency Resolution Dependencies Resolved ============================================================================= Package Arch Version Repository Size ============================================================================= Installing: httpd i386 2.2.8-1.el5s2.centos c5-testing 1.0 M Transaction Summary ============================================================================= Install 1 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 1.0 M Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: Package perl-libapreq needs perl(Apache::Table), this is not available. Package perl-libapreq needs perl(mod_perl) >= 1.17, this is not available. Package perl-libapreq needs perl(mod_perl) >= 1.17, this is not available. Package apache-devel needs apache = 1.3.41, this is not available. Complete! bash-3.2#

  Read the article

• What's needed in a complete ASP.NET environment?

  - by Christian W

  We have a ASP3.0 application with a few ASP.NET (2.0) dittys mixed in. (Our longtime goal is to migrate everything to ASP.NET but that's not important for this issue) Our current test/deploy workflow is like this: 1 Use notepad++ or VS2008 to fix a bug/feature (depending on what I have open) 2 Open my virtual test-server 3 Copy the fixed file over, either with explorer, or if I can be bothered to open it, WinMerge 4 Test that the fix works 5 Close the virtual test-server 6 Connect to our host with VPN 7 Use WinMerge to update the files necessary 8 Pray to higher powers that the production environment is not so different that something bombs. To make things worse, only I have access to my "test-server". So I'm the only one testing it. I really want to make this a bit more robust, I even have a subversion setup running. But I always forget to commit changes... And I don't even work in my checked out folder, but a copy of what is currently in production... Can someone recommend some good reading on deploying, testing, staging and stuff like that. I currently use VS2008 and want to use subversion or GIT (or any other free VCS). Since I'm the only developer, teamsystem is not really an option (cost-related). I have found myself developing an "improved" feature, only to find a bug in the same feature in the production system. And since my "improved" feature incorporated deleting some old functionality, I have to fix bugs directly in production... That's not a fun feeling... (I have inherited this system recently... So it's not directly my fault that it is like this ;) )

  Read the article

• Is there a tool that can test what SSL/TLS cipher suites a particular website offers?

  - by Jeremy Powell

  Is there a tool that can test what SSL/TLS cipher suites a particular website offers? I've tried openssl, but if you examine the output: $ echo -n | openssl s_client -connect www.google.com:443 CONNECTED(00000003) depth=1 /C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA verify error:num=20:unable to get local issuer certificate verify return:0 --- Certificate chain 0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com i:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA 1 s:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- MIIDITCCAoqgAwIBAgIQL9+89q6RUm0PmqPfQDQ+mjANBgkqhkiG9w0BAQUFADBM MQswCQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg THRkLjEWMBQGA1UEAxMNVGhhd3RlIFNHQyBDQTAeFw0wOTEyMTgwMDAwMDBaFw0x MTEyMTgyMzU5NTlaMGgxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlh MRYwFAYDVQQHFA1Nb3VudGFpbiBWaWV3MRMwEQYDVQQKFApHb29nbGUgSW5jMRcw FQYDVQQDFA53d3cuZ29vZ2xlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC gYEA6PmGD5D6htffvXImttdEAoN4c9kCKO+IRTn7EOh8rqk41XXGOOsKFQebg+jN gtXj9xVoRaELGYW84u+E593y17iYwqG7tcFR39SDAqc9BkJb4SLD3muFXxzW2k6L 05vuuWciKh0R73mkszeK9P4Y/bz5RiNQl/Os/CRGK1w7t0UCAwEAAaOB5zCB5DAM BgNVHRMBAf8EAjAAMDYGA1UdHwQvMC0wK6ApoCeGJWh0dHA6Ly9jcmwudGhhd3Rl LmNvbS9UaGF3dGVTR0NDQS5jcmwwKAYDVR0lBCEwHwYIKwYBBQUHAwEGCCsGAQUF BwMCBglghkgBhvhCBAEwcgYIKwYBBQUHAQEEZjBkMCIGCCsGAQUFBzABhhZodHRw Oi8vb2NzcC50aGF3dGUuY29tMD4GCCsGAQUFBzAChjJodHRwOi8vd3d3LnRoYXd0 ZS5jb20vcmVwb3NpdG9yeS9UaGF3dGVfU0dDX0NBLmNydDANBgkqhkiG9w0BAQUF AAOBgQCfQ89bxFApsb/isJr/aiEdLRLDLE5a+RLizrmCUi3nHX4adpaQedEkUjh5 u2ONgJd8IyAPkU0Wueru9G2Jysa9zCRo1kNbzipYvzwY4OA8Ys+WAi0oR1A04Se6 z5nRUP8pJcA2NhUzUnC+MY+f6H/nEQyNv4SgQhqAibAxWEEHXw== -----END CERTIFICATE----- subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com issuer=/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA --- No client certificate CA names sent --- SSL handshake has read 1777 bytes and written 316 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 748E2B5FEFF9EA065DA2F04A06FBF456502F3E64DF1B4FF054F54817C473270C Session-ID-ctx: Master-Key: C4284AE7D76421F782A822B3780FA9677A726A25E1258160CA30D346D65C5F4049DA3D10A41F3FA4816DD9606197FAE5 Key-Arg : None Start Time: 1266259321 Timeout : 300 (sec) Verify return code: 20 (unable to get local issuer certificate) --- it just shows that the cipher suite is something with AES256-SHA. I know I could grep through the hex dump of the conversation, but I was hoping for something a little more elegant. I would prefer Linux tools, but Windows (or other) would be fine. This question is motivated by the security testing I do for PCI and general penetration testing. Update: GregS points out below that the SSL server picks from the cipher suites of the client. So it seems I would need to test all cipher suites one at a time. I think I can hack something together, but is there a tool that does particularly this?

  Read the article

• Require a very simple bash-based webserver for logging XML POST [on hold]

  - by Syffys

  As in title, it's for testing purpose and I need it to be extremely light (1 line to 1 single light file). Here is a XML query sample: XML_QUERY=$(cat <<EOF <?xml version='1.0' encoding='UTF-8'?> <Test></Test> EOF ) curl -H "Content-type: text/xml; charset=utf-8" -H "Soapaction: \"\"" -k -d "${XML_QUERY}" http://localhost:8088 Here are some of the tracks I have found so far even if I wasnt able to adapt them to work as I expect: Netcat minimal webserver: Problem is that my nc does not have the -q option, so the connection is closing before delivering the XML content Netcat Only webserver: Same as above Thanks in advance! EDIT: As it's been asked, I'm running Linux Redhat, even if the distro does not really matter and the OS implied since I'm asking a bash-based solution... Also about my topic being on hold: "Instead, describe your situation and the specific problem you're trying to solve" = I though this was exactly what I was doing, but ok I'll reword: My situation: bash environment (which can also include some standard linux tool: netcat, python or whatever) My specific problem: please see title: Require a very simple bash-based webserver for logging XML in HTTP POST for testing purpose

  Read the article

• How to verify power provided to processors is clean

  - by GregC

  Once in a blue moon, I am seeing a blue screen of death on a shiny new Dell R7610 with a single 1100 Watt Dell-provided power supply on a beefy UPS. BCode is 101 (A clock interrupt was not received...), which some say is caused by under-volting a CPU. Naturally, I would have to contact Dell support, and their natural reaction would be to replace a motherboard, a power supply, or CPU, or a mixture of the above components. In synthetic benchmarks, system memory and CPU, as well as graphics memory and CPU perform admirably, staying up for hours and days. My questions are: Is power supply good enough for the application? Does it provide clean enough power to VRMs on the motherboard? Are VRMs good enough for dual Xeon E5-2665? Does C-states logic work correctly? Is there sufficient current provided to PCIe peripherals, such as disk controllers? P.S. Recently, I've gone through the ordeal with HP. They were nice and professional about it, but root cause was not established, and the HP machine still is less than 100%, giving me a blue screen of death once in a couple of months. Here's what quick web-searching turns up: http://www.sevenforums.com/bsod-help-support/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 It appears Dell has addressed the above issue by clocking PCIe bus down to 5GT/sec in A03 BIOS. My disk controllers support PCIe 3.0, meaning that I would have to re-validate stability. Early testing shows improvements. Further testing shows significant decrease in performance on each of the x16 slots with Dell R7610 with A03 BIOS. But now it's running stable. HP machine has received a microcode update in September 2013 SUM (July BIOS) that makes it stable.

  Read the article

• Strange sound behavior

  - by caarlos0

  First of all, sorry for the tittle. English isn't my native language, and I can't find a word to describe the strange behavior I'm getting here. In the most simple explanation, is like sound keeps going down and up again... Think in a kid with that old radios that have a circled volume button. Think like these kid keeps "turning" the volume button. That is the behavior I'm getting here. At first, I believed that it was a pulseaudio issue, but, it isn't. I followed the wiki part I think that should be my problem, but it didn't work. After that, as I'm using XFCE, I didn't really need pulseaudio, so I removed it and stays with a clean alsa, hopping that will fix my problem. Sweet mistake. It really looks like a kid looking for trouble. I believed it worked, and, suddenly, here is the same issue again. BTW: I have a full-upgraded testing system (yeah, I upgraded to testing hopping for new pulseaudio version which fix the issue), no pulseaudio at all, just xfce, started with startxfce. What can I do to fix this? It's extremely annoying... sometimes I just want to throw my laptop in the wall because of this. Any extra info you need, please, tell me. Thanks in advance -- EDIT: My alsamixer is like this: And here is a video with the sound behavior.

  Read the article

• Adding subnet to a vsphere with single vcenter and esxi host

  - by Ilya Rakhlin

  Let me start of by saying that I do not specialize in networking, I am in the process of adding additional VMs to a testing environment and wanted some recommendations. In this case I am running a single ESXI 5.1 host and a single Vcenter management server. The problem is, I need another range of IP addresses added to the existing setup; hopefully without reconfiguring everything. Currently the esxi host is configured to IP: 192.168.100.200, gateway: 192.168.100.1 and subnet: 255.255.255.0. All of the VMs are running some version of linux with hard coded IP addresses in that range, and using that subnet. The VMs I am about to deploy I want to be on the 192.168.101.X network. Is it possible to add an additional subnet to this existing system that will also communicate with the current subnet? The esxi host has 6 physical NICs but only one connected as it is only a testing system; not sure if that matters. Are there any other ways to accomplish this hopefully without restarting or at least reconfiguring the IP addresses for each VM? Reason: Due to the configuration of the VMs to run the applications that we need I am using a large amount of the current IPs in the potential range (mostly VIPs). I will be setting up a new version of this “environment” while keeping the old one, thus potentially running out of IP addresses.

  Read the article

• How to diagnose storage system scaling problems?

  - by Unknown

  We are currently testing the maximum sequential read throughput of a storage system (48 disks total behind two HP P2000 arrays) connected to HP DL580 G7 running RHEL 5 with 128 GB of memory. Initial testing has been mainly done by running DD-commands like this: dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=3000 In parallel for each disk. However, we have been unable to scale the results from one array (maximum throughput of 1.3 GB/s) to two (almost the same throughput). Each array is connected to a dedicated host bust adapter, so they should not be the bottleneck. The disks are currently in JBOD configuration, so each disk can be addressed directly. I have two questions: Is running multiple DD commands in parallel really a good way to test maximum read throughput? We have noticed very high SWAPIN-% numbers in iotop, which I find hard to explain because the target is /dev/null How shoud we proceed in trying to find the reason for the scaling problem? Do you thing the server itself is the bottleneck here, or could there be some linux parameters that we have overlooked?

  Read the article

• how is the the linux console displayed to the user and how does the user go about changing the conso

  - by Chris

  I've been searching for the last two day on trying to understand how the console displays itself to the user and how to change the console settings. I've had some luck along the way but nothing that I've found has giving me a real clear explanation of how the console is displayed or how to change or control it's display settings. Some examples that of what I'm looking for are as follows: How is the console displayed on the screen? I know with X11 it uses your graphics card driver to display graphics to the screen, but how is the consoles text mode handled? Could some one ether explain this to me or point me to an in-depth overview of it all? Is it possible to have multi-head support in console mode with separate tty's on each screen? If so how would I go about setting this up? How would you go about changing the size of the console display from the default 80x25 to a custom size? I'm testing anything I find on a debian testing build, which is just the minimal base install on a virtual box. In time I will be using this information to setup my main system which is multi-head with 3 monitors. I would like to be able to support all three displays in console mode if possible.

  Read the article

• VPN service into 192 network

  - by tophersmith116

  I'm thinking about setting up a security testing lab. I work on a switched network, and that just makes for unnecessary headaches when doing testing. I'd like to create a 192 network with a few machines inside for DBs and AppServers etc. I will need a pivot machine that connects to both the outer network and the 192 (for automation purposes). But I'd like to be able to connect into the 192 network with my own machine from the outer network as the "attacking" machine (rather than have dedicated attack machines inside the 192 network). Therefore, I'd like to have the pivot server be a VPN server as well, so that my machine can VPN into the 192 network from the outer network. First off, is this even possible? Can I have a single computer with two NICs where a VPN service allows remote connections into the 192? Secondly, I'd like to have multiple outer clients connect to the VPN. Does anyone have any suggestions? I've used Hamachi well before, but I've also seen some good stuff from OpenVPN.

  Read the article

• Google analytics ignoring "required step" in goals

  - by Matt Huggins

  I am A/B testing a landing page to see which converts better. The funnels are set up exactly the same in terms of the goal completion URL and funnel steps, with one exception: the first step (which is a required step) has a different URL to represent each of the two landing pages. Unfortunately, Google is tracking a conversion for both of these goals regardless of which landing page a user is reaching! It looks like the "required step" is broken...perhaps it is a deeper issue if others haven't noticed it, such as it only not working when the goal URL is the same between multiple goals. Here is an example of what I mean. Goal 1: Goal URL: /users/dashboard (head match) Funnel: 1. /homepages/index1 (required step) 2. /users/register 3. /users/edit Goal 2: Goal URL: /users/dashboard (head match) Funnel: 1. /homepages/index2 (required step) 2. /users/register 3. /users/edit As you can see, the only difference is step #1 of the funnel. Since I am A/B testing the landing page of the site, this should be the only difference. However, when I look at the goal page of Google Analytics, I see that the goal is being recorded for both of these regardless of the landing page being reached. The only tinkering I've done is attempting to wrap each funnel step's goal in ^ and $ characters for an exact regular expression match, but this didn't make a difference. Thoughts?

  Read the article

• How do I configure Jetty (via jettyrunner) so that it names a character set in the Content-Type response header?

  - by Pointy

  I use Jetty (via the oh-so-handy Jetty Runner) for day-to-day web application testing. One thing I've recently stumbled on is the fact that I don't get a character set called out in the "Content-Type" response header all the time. I do get it in response to my application's XMLHttpRequest transactions, but not for plain old pages loaded by <a> links or whatever. I've read a little bit about how to set up a Jetty config file, but I've never been able to completely understand that; all servlet containers are complicated, and while Jetty is pretty simple it's just weird enough that I don't grok the overall idea. Thus, all I do to launch my app is to run the Jetty Runner .jar file with a couple of simple arguments to set up the port number and logfile path, and then I just give it the .war file to run. It works great — except for the missing character set :-) Anybody have a quick sample config file that might fix this? edit — oh if it matters, I'm running Jetty 7.0.0 RC3; I've also tried with a slightly newer version (still 7.something) with exactly the same issue. All my testing is on Ubuntu.

  Read the article

• What are the possible problems, when wget returns code 500 but same request works in normal browsers?

  - by markus

  What should I be looking for, when wget returns 500 but the same URL works fine in my web browser? I don't see any access_log entries that seem to be related to the error. DEBUG output created by Wget 1.14 on linux-gnu. <SSL negotiation info stripped out> ---request begin--- GET /survey/de/tools/clear-caches/password/<some-token> HTTP/1.1 User-Agent: Wget/1.14 (linux-gnu) Accept: */* Host: testing.thesurveylab.net Connection: Keep-Alive ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.0 500 Internal Server Error Date: Wed, 12 Dec 2012 14:53:07 GMT Server: Apache/2.2.3 (CentOS) Set-Cookie: blueprint2-staging=8jnbmkqapl30hjkgo0u6956pd1; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Strict-Transport-Security: max-age=8640000;includeSubdomains X-UA-Compatible: IE=Edge,chrome=1 Content-Length: 5 Connection: close Content-Type: text/html; charset=UTF-8 ---response end--- 500 Internal Server Error Stored cookie testing.thesurveylab.net -1 (ANY) / <session> <insecure> [expiry none] blueprint2-staging 8jnbmkqapl30hjkgo0u6956pd1 Closed 3/SSL 0x0000000001f33430 2012-12-12 15:53:07 ERROR 500: Internal Server Error.

  Read the article

• Router as primary DNS server, Server as alternate? (or vice versa)

  - by Jakobud

  We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

  Read the article

• ZFS & Deduplicating FLAC Data

  - by jasongullickson

  I'm experimenting with using ZFS to deduplicate a large library of FLAC files. The purpose of this is twofold: Reduce storage utilization Reduce bandwidth needed to sync the library with cloud storage Many of these files are of the same music tracks but from different physical media. This means that for the most part they are the same and usually close to the same size, which makes me think that they should benefit from block-level deduplication. However in my testing I'm not seeing good results. When I create a pool and add three of these tracks (identical songs from different source media) zpool list reports 1.00 dedupe. If I copy all of the files (make exact duplicates of the three) dedupe climbs, so I know that it is enabled and functioning, but it's not finding any duplication in the original collection of files. My first thought was that perhaps some of the variable header data (metadata tags, etc.) might be mis-aligning the bulk of the data in these files (the audio frames) but even making the header data consistent across the three files doesn't seem to have any impact on deduplication. I'm considering taking alternate routes (testing other dedupe filesystems as well as some custom code) but since we're already using ZFS and I like the ZFS replication options, I'd prefer to use ZFS dedupe for this project; but perhaps it's simply not capable of working well with this sort of data. Any feedback regarding tuning that might improve dedupe performance for this sort of dataset, or confirmation that ZFS dedupe is not the right tool for this job are appreciated.

  Read the article

• Debian - Problems Unmounting External Hard Drives

  - by user331981

  I recently installed Debian Testing on a new laptop and I just noticed that I am having some issues with unmounting external hard drives. I am using Mate Desktop 1.8.1. With the 1st drive, if I right click on the drive and select “safely remove”: The drive unmounts, spins down, immediately spins back up an remounts. Unable to unmount. With the 2nd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down. With the 3rd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down, immediately spins back up but does not remount, and after 20 seconds, it spins down and stays that way. Behavior is the same on both USB 2.0 and USB 3.0 ports. On my last laptop, on which I also used Debian Testing + Mate desktop, the safe removal of drives worked out of the box and I never had an issue with it. The drives would unmount, spin down and stay that way. To remount the drive, one needed to unplug the device and plug it back in. I am unsure how to troubleshoot this issue and I am not sure if it is merely a matter of installing a “missing” package of editing a config file. Thank you in advance.

  Read the article

• How do I find and kill a php loop (process)?

  - by Hoytman

  I have a php script that I have been developing which calls an external api within a loop. It is being tested on a VPS which is running LAMP on Debian. I noticed this morning that the api was not responding to my script. When I called the provider, they told me that my server had been calling the api 1000's of times per hour for the past 10 hours. I am assuming that a php script (which I have been working on the day before and testing on my VPS) entered into an infinite loop during one of the executions, and never came out (I have been testing it from the command prompt, and not over the web.) I have attempted to stop and start Apache, but the api support staff says that the calls are still coming in from my server address. How can I find and stop the process? Also, is there a possibility that the Apache stop/start solved the problem, but the api is still trying to sort through past calls? Please forgive me for not using my local test environment correctly. Edit: I do not know the process name, I need to discover the name (or pid) based on behavior.

  Read the article

• Mysql InnoDB and quickly applying large updates

  - by Tim

  Basically my problem is that I have a large table of about 17,000,000 products that I need to apply a bunch of updates to really quickly. The table has 30 columns with the id set as int(10) AUTO_INCREMENT. I have another table which all of the updates for this table are stored in, these updates have to be pre-calculated as they take a couple of days to calculate. This table is in the format of [ product_id int(10), update_value int(10) ]. The strategy I'm taking to issue these 17 million updates quickly is to load all of these updates into memory in a ruby script and group them in a hash of arrays so that each update_value is a key and each array is a list of sorted product_id's. { 150: => [1,2,3,4,5,6], 160: => [7,8,9,10] } Updates are then issued in the format of UPDATE product SET update_value = 150 WHERE product_id IN (1,2,3,4,5,6); UPDATE product SET update_value = 160 WHERE product_id IN (7,8,9,10); I'm pretty sure I'm doing this correctly in the sense that issuing the updates on sorted batches of product_id's should be the optimal way to do it with mysql / innodb. I'm hitting a weird issue though where when I was testing with updating ~13 million records, this only took around 45 minutes. Now I'm testing with more data, ~17 million records and the updates are taking closer to 120 minutes. I would have expected some sort of speed decrease here but not to the degree that I'm seeing. Any advice on how I can speed this up or what could be slowing me down with this larger record set? As far as server specs go they're pretty good, heaps of memory / cpu, the whole DB should fit into memory with plenty of room to grow.

  Read the article

• Too many connections to Sql Server 2008

  - by Luis Forero

  I have an application in C# Framework 4.0. Like many app this one connects to a data base to get information. In my case this database is SqlServer 2008 Express. The database is in my machine In my data layer I’m using Enterprise Library 5.0 When I publish my app in my local machine (App Pool Classic) Windows Professional IIS 7.5 The application works fine. I’m using this query to check the number of connections my application is creating when I’m testing it. SELECT db_name(dbid) as DatabaseName, count(dbid) as NoOfConnections, loginame as LoginName FROM sys.sysprocesses WHERE dbid > 0 AND db_name(dbid) = 'MyDataBase' GROUP BY dbid, loginame When I start testing the number of connection start growing but at some point the max number of connection is 26. I think that’s ok because the app works When I publish the app to TestMachine1 • XP Mode Virtual Machine (Windows XP Professional) • IIS 5.1 It works fine, the behavior is the same, the number of connections to the database increment to 24 or 26, after that they stay at that point no matter what I do in the application. The problem: When I publish to TestMachine2 (App Pool Classic) • Windows Server 2008 R2 • IIS 7.5 I start to test the application the number of connection to the database start to grow but this time they grow very rapidly and don’t stop growing at 24 or 26, the number of connections grow till the get to be 100 and the application stop working at that point. I have check for any difference on the publications, especially in Windows Professional and Windows Server and they seem with the same parameters and configurations. Any clues why this could be happening? , any suggestions?

  Read the article

• IE8 page reload hangs

  - by Rod

  When a 7mb HTM file is first opened (by clicking on the file icon or using Open With), both IE8 and Firefox display this browser file quickly. After the file is closed, Firefox will reopen this file quickly, but IE8 appears to hang during the reopen. Clearing the IE cache does not help. However, IE will reopen the file quickly again only if the File/Open/Browse feature of the menu bar is used (clicking on the file icon can be used only once between computer reboots). Testing suggests that the problem relates to the number of HTML hyperlinks pointing to another part of the file. There are many hyperlinks, but they are not a problem during the first load of the document (between computer reboots). What needs to be fixed to avoid use of the workaround? Using Windows XP SP3 Update 6/23/12 - Controlled testing shows that the number of hyperlinks is not the problem. The way this large file is opened is the difference: 1) from the IE menu bar, File/Open/Browse is consistent and fast (but not as fast as FF). 2) clicking on the file name in the folder (even when IE is the default program for this file type) causes a much delayed load of the file. Creating a smaller file demonstrates the delayed load, but verifies that the load eventually occurs.

  Read the article

• JRuby wrong element type class java.lang.String(array contains char) related to JAVA_HOME

  - by Daryl

  I am on Ubuntu x64 bit running: java version "1.6.0_18" OpenJDK Runtime Environment (IcedTea6 1.8) (6b18-1.8-0ubuntu1) OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode) and jruby 1.4.0 (ruby 1.8.7 patchlevel 174) (2010-02-11 6586) (OpenJDK 64-Bit Server VM 1.6.0_18) [amd64-java] I have this code running on my Windows 7 computer at home. I recently copied over my whole folder over to Ubuntu, installed java, jruby, and associated gems but I get this error when I run my main file: jruby run.rb test =================Processing FREDERICKSBURG_1.1======================= ERROR IN TESTING wrong element type class java.lang.String(array contains char) /home/daryl/Desktop/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `to_java' /home/daryl/Desktop/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `split' /home/daryl/Desktop/work/Code/geografikos/lib/models/page.rb:103:in `sentences' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/lingpipe_svm.rb:34:in `extract' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:9:in `process' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `each' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `process' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `each' /home/daryl/Desktop/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `process' /home/daryl/Desktop/work/Code/geografikos/lib/statistics.rb:111:in `generate_all' /home/daryl/Desktop/work/Code/geografikos/lib/statistics.rb:105:in `each' /home/daryl/Desktop/work/Code/geografikos/lib/statistics.rb:105:in `generate_all' run.rb:56 The focus of the error is: ERROR IN TESTING wrong element type class java.lang.String(array contains char) Everything works fine on my windows machine. I figured I was getting this error because I did not have JAVA_HOME set however I added this to bashrc as: export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk and have confirmed: echo $JAVA_HOME /usr/lib/jvm/java-1.6.0-openjdk I can produce a similar error by removing my JAVA_HOME variable on windows: =================Processing FREDERICKSBURG_1.3======================= ERROR IN TESTING cannot convert instance of class org.jruby.RubyString to char C:/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `to_java' C:/work/Code/geografikos/lib/sentence_splitter/splitter.rb:21:in `split' C:/work/Code/geografikos/lib/models/page.rb:103:in `sentences' C:/work/Code/geografikos/lib/extractor/lingpipe_svm.rb:34:in `extract' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:9:in `process' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `each' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:8:in `process' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `each' C:/work/Code/geografikos/lib/extractor/geo_controller.rb:6:in `process' C:/work/Code/geografikos/lib/statistics.rb:111:in `generate_all' C:/work/Code/geografikos/lib/statistics.rb:105:in `each' C:/work/Code/geografikos/lib/statistics.rb:105:in `generate_all' run.rb:56 It is obviously not exactly the same but I have a feeling this has to do with the java path. You can probably derive from the error that I am just trying to convert a ruby variable to java using to_java. This works fine on my windows machine and I have confirmed the gems are the same but I don't think this has to do with gems. I lied. I changed my JAVA_HOME back on my windows machine and this error still occurs. So now the code doesn't run on either machine. I recently installed git on my windows machine and added the code to a repository. But I haven't really done anything with it. All it said was it will convert all LF to CRLF...That shouldn't change anything though should it? Any ideas on why I am now getting these errors? I haven't changed anything on my windows machine in months except for installing git.

  Read the article

• Design Question - how do you break the dependency between classes using an interface?

  - by Seth Spearman

  Hello, I apologize in advance but this will be a long question. I'm stuck. I am trying to learn unit testing, C#, and design patterns - all at once. (Maybe that's my problem.) As such I am reading the Art of Unit Testing (Osherove), and Clean Code (Martin), and Head First Design Patterns (O'Reilly). I am just now beginning to understand delegates and events (which you would see if you were to troll my SO questions of recent). I still don't quite get lambdas. To contextualize all of this I have given myself a learning project I am calling goAlarms. I have an Alarm class with members you'd expect (NextAlarmTime, Name, AlarmGroup, Event Trigger etc.) I wanted the "Timer" of the alarm to be extensible so I created an IAlarmScheduler interface as follows... public interface AlarmScheduler { Dictionary<string,Alarm> AlarmList { get; } void Startup(); void Shutdown(); void AddTrigger(string triggerName, string groupName, Alarm alarm); void RemoveTrigger(string triggerName); void PauseTrigger(string triggerName); void ResumeTrigger(string triggerName); void PauseTriggerGroup(string groupName); void ResumeTriggerGroup(string groupName); void SetSnoozeTrigger(string triggerName, int duration); void SetNextOccurrence (string triggerName, DateTime nextOccurrence); } This IAlarmScheduler interface define a component that will RAISE an alarm (Trigger) which will bubble up to my Alarm class and raise the Trigger Event of the alarm itself. It is essentially the "Timer" component. I have found that the Quartz.net component is perfectly suited for this so I have created a QuartzAlarmScheduler class which implements IAlarmScheduler. All that is fine. My problem is that the Alarm class is abstract and I want to create a lot of different KINDS of alarm. For example, I already have a Heartbeat alarm (triggered every (int) interval of minutes), AppointmentAlarm (triggered on set date and time), Daily Alarm (triggered every day at X) and perhaps others. And Quartz.NET is perfectly suited to handle this. My problem is a design problem. I want to be able to instantiate an alarm of any kind without my Alarm class (or any derived classes) knowing anything about Quartz. The problem is that Quartz has awesome factories that return just the right setup for the Triggers that will be needed by my Alarm classes. So, for example, I can get a Quartz trigger by using TriggerUtils.MakeMinutelyTrigger to create a trigger for the heartbeat alarm described above. Or TriggerUtils.MakeDailyTrigger for the daily alarm. I guess I could sum it up this way. Indirectly or directly I want my alarm classes to be able to consume the TriggerUtils.Make* classes without knowing anything about them. I know that is a contradiction, but that is why I am asking the question. I thought about putting a delegate field into the alarm which would be assigned one of these Make method but by doing that I am creating a hard dependency between alarm and Quartz which I want to avoid for both unit testing purposes and design purposes. I thought of using a switch for the type in QuartzAlarmScheduler per here but I know it is bad design and I am trying to learn good design. If I may editorialize a bit. I've decided that coding (predefined) classes is easy. Design is HARD...in fact, really hard and I am really fighting feeling stupid right now. I guess I want to know if you really smart people took a while to really understand and master this stuff or should I feel stupid (as I do) because I haven't grasped it better in the couple of weeks/months I have been studying. You guys are awesome and thanks in advance for your answers. Seth

  Read the article

• non blocking client server chat application in java using nio

  - by Amith

  I built a simple chat application using nio channels. I am very much new to networking as well as threads. This application is for communicating with server (Server / Client chat application). My problem is that multiple clients are not supported by the server. How do I solve this problem? What's the bug in my code? public class Clientcore extends Thread { SelectionKey selkey=null; Selector sckt_manager=null; public void coreClient() { System.out.println("please enter the text"); BufferedReader stdin=new BufferedReader(new InputStreamReader(System.in)); SocketChannel sc = null; try { sc = SocketChannel.open(); sc.configureBlocking(false); sc.connect(new InetSocketAddress(8888)); int i=0; while (!sc.finishConnect()) { } for(int ii=0;ii>-22;ii++) { System.out.println("Enter the text"); String HELLO_REQUEST =stdin.readLine().toString(); if(HELLO_REQUEST.equalsIgnoreCase("end")) { break; } System.out.println("Sending a request to HelloServer"); ByteBuffer buffer = ByteBuffer.wrap(HELLO_REQUEST.getBytes()); sc.write(buffer); } } catch (IOException e) { e.printStackTrace(); } finally { if (sc != null) { try { sc.close(); } catch (Exception e) { e.printStackTrace(); } } } } public void run() { try { coreClient(); } catch(Exception ej) { ej.printStackTrace(); }}} public class ServerCore extends Thread { SelectionKey selkey=null; Selector sckt_manager=null; public void run() { try { coreServer(); } catch(Exception ej) { ej.printStackTrace(); } } private void coreServer() { try { ServerSocketChannel ssc = ServerSocketChannel.open(); try { ssc.socket().bind(new InetSocketAddress(8888)); while (true) { sckt_manager=SelectorProvider.provider().openSelector(); ssc.configureBlocking(false); SocketChannel sc = ssc.accept(); register_server(ssc,SelectionKey.OP_ACCEPT); if (sc == null) { } else { System.out.println("Received an incoming connection from " + sc.socket().getRemoteSocketAddress()); printRequest(sc); System.err.println("testing 1"); String HELLO_REPLY = "Sample Display"; ByteBuffer buffer = ByteBuffer.wrap(HELLO_REPLY.getBytes()); System.err.println("testing 2"); sc.write(buffer); System.err.println("testing 3"); sc.close(); }}} catch (IOException e) { e.printStackTrace(); } finally { if (ssc != null) { try { ssc.close(); } catch (IOException e) { e.printStackTrace(); } } } } catch(Exception E) { System.out.println("Ex in servCORE "+E); } } private static void printRequest(SocketChannel sc) throws IOException { ReadableByteChannel rbc = Channels.newChannel(sc.socket().getInputStream()); WritableByteChannel wbc = Channels.newChannel(System.out); ByteBuffer b = ByteBuffer.allocate(1024); // read 1024 bytes while (rbc.read(b) != -1) { b.flip(); while (b.hasRemaining()) { wbc.write(b); System.out.println(); } b.clear(); } } public void register_server(ServerSocketChannel ssc,int selectionkey_ops)throws Exception { ssc.register(sckt_manager,selectionkey_ops); }} public class HelloClient { public void coreClientChat() { Clientcore t=new Clientcore(); new Thread(t).start(); } public static void main(String[] args)throws Exception { HelloClient cl= new HelloClient(); cl.coreClientChat(); }} public class HelloServer { public void coreServerChat() { ServerCore t=new ServerCore(); new Thread(t).start(); } public static void main(String[] args) { HelloServer st= new HelloServer(); st.coreServerChat(); }}

  Read the article

• (iOS) UI Automation AlertPrompt button/textField accessiblity

  - by lipd

  I'm having a bit of trouble with UI Automation (the built in to iOS tool) when it comes to alertView. First off, I'm not sure where I can set the accessibilityLabel and such for the buttons that are on the alertView. Secondly, although I am not getting an error, I can't get my textField to actually set the value of the textField to something. I'll put up my code for the alertView and the javaScript I am using for UI Automation. UIATarget.onAlert = function onAlert(alert) { // Log alerts and bail, unless it's the one we want var title = alert.name(); UIALogger.logMessage("Alert with title '" + title + "' encountered!"); alert.logElementTree(); if (title == "AlertPrompt") { UIALogger.logMessage(alert.textFields().length + ''); target.delay(1); alert.textFields()["AlertText"].setValue("AutoTest"); target.delay(1); return true; // Override default handler } else return false; } var target = UIATarget.localTarget(); var application = target.frontMostApp(); var mainWindow = application.mainWindow(); mainWindow.logElementTree(); //target.delay(1); //mainWindow.logElementTree(); //target.delay(1); var tableView = mainWindow.tableViews()[0]; var button = tableView.buttons(); //UIALogger.logMessage("Num buttons: " + button.length); //UIALogger.logMessage("num Table views: " + mainWindow.tableViews().length); //UIALogger.logMessage("Number of cells: " + tableView.cells().length); /*for (var currentCellIndex = 0; currentCellIndex < tableView.cells().length; currentCellIndex++) { var currentCell = tableView.cells()[currentCellIndex]; UIALogger.logStart("Testing table option: " + currentCell.name()); tableView.scrollToElementWithName(currentCell.name()); target.delay(1); currentCell.tap();// Go down a level target.delay(1); UIATarget.localTarget().captureScreenWithName(currentCell.name()); //mainWindow.navigationBar().leftButton().tap(); // Go back target.delay(1); UIALogger.logPass("Testing table option " + currentCell.name()); }*/ UIALogger.logStart("Testing add item"); target.delay(1); mainWindow.navigationBar().buttons()["addButton"].tap(); target.delay(1); if(tableView.cells().length == 5) UIALogger.logPass("Successfully added item to table"); else UIALogger.logFail("FAIL: didn't add item to table"); Here's what I'm using for the alertView #import "AlertPrompt.h" @implementation AlertPrompt @synthesize textField; @synthesize enteredText; - (id)initWithTitle:(NSString *)title message:(NSString *)message delegate:(id)delegate cancelButtonTitle:(NSString *)cancelButtonTitle okButtonTitle:(NSString *)okayButtonTitle withOrientation:(UIInterfaceOrientation) orientation { if ((self == [super initWithTitle:title message:message delegate:delegate cancelButtonTitle:cancelButtonTitle otherButtonTitles:okayButtonTitle, nil])) { self.isAccessibilityElement = YES; self.accessibilityLabel = @"AlertPrompt"; UITextField *theTextField; if(orientation == UIInterfaceOrientationPortrait) theTextField = [[UITextField alloc] initWithFrame:CGRectMake(12.0, 45.0, 260.0, 25.0)]; else theTextField = [[UITextField alloc] initWithFrame:CGRectMake(12.0, 30.0, 260.0, 25.0)]; [theTextField setBackgroundColor:[UIColor whiteColor]]; [self addSubview:theTextField]; self.textField = theTextField; self.textField.isAccessibilityElement = YES; self.textField.accessibilityLabel = @"AlertText"; [theTextField release]; CGAffineTransform translate = CGAffineTransformMakeTranslation(0.0, 0.0); [self setTransform:translate]; } return self; } - (void)show { [textField becomeFirstResponder]; [super show]; } - (NSString *)enteredText { return [self.textField text]; } - (void)dealloc { //[textField release]; [super dealloc]; } @end Thanks for any help!

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >