Search Results

Search found 23939 results on 958 pages for 'block size'.

Page 155/958 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Reconstructing the disk order in RAID 6 with 7 disks

  - by rkotulla

  a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• Hard drive after PCB swap strange stuff

  - by ramyy

  I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

  Read the article

• mysterical error

  - by Görkem Buzcu

  i get "customer_service_simulator.exe stopped" error, but i dont know why? this is my c programming project and i have limited time left before deadline. the code is: #include <stdio.h> #include <stdlib.h> #include<time.h> #define FALSE 0 #define TRUE 1 /*A Node declaration to store a value, pointer to the next node and a priority value*/ struct Node { int priority; //arrival time int val; //type int wait_time; int departure_time; struct Node *next; }; Queue Record that will store the following: size: total number of elements stored in the list front: it shows the front node of the queue (front of the queue) rear: it shows the rare node of the queue (rear of the queue) availability: availabity of the teller struct QueueRecord { struct Node *front; struct Node *rear; int size; int availability; }; typedef struct Node *niyazi; typedef struct QueueRecord *Queue; Queue CreateQueue(int); void MakeEmptyQueue(Queue); void enqueue(Queue, int, int); int QueueSize(Queue); int FrontOfQueue(Queue); int RearOfQueue(Queue); niyazi dequeue(Queue); int IsFullQueue(Queue); int IsEmptyQueue(Queue); void DisplayQueue(Queue); void sorteddequeue(Queue); void sortedenqueue(Queue, int, int); void tellerzfunctionz(Queue *, Queue, int, int); int main() { int system_clock=0; Queue waitqueue; int exit, val, priority, customers, tellers, avg_serv_time, sim_time,counter; char command; waitqueue = CreateQueue(0); srand(time(NULL)); fflush(stdin); printf("Enter number of customers, number of tellers, average service time, simulation time\n:"); scanf("%d%c %d%c %d%c %d",&customers, &command,&tellers,&command,&avg_serv_time,&command,&sim_time); fflush(stdin); Queue tellerarray[tellers]; for(counter=0;counter<tellers;counter++){ tellerarray[counter]=CreateQueue(0); //burada teller sayisi kadar queue yaratiyorum } for(counter=0;counter<customers;counter++){ priority=1+(int)rand()%sim_time; //this will generate the arrival time sortedenqueue(waitqueue,1,priority); //here i put the customers in the waiting queue } tellerzfunctionz(tellerarray,waitqueue,tellers,customers); DisplayQueue(waitqueue); DisplayQueue(tellerarray[0]); DisplayQueue(tellerarray[1]); // waitqueue-> printf("\n\n"); system("PAUSE"); return 0; } /*This function initialises the queue*/ Queue CreateQueue(int maxElements) { Queue q; q = (struct QueueRecord *) malloc(sizeof(struct QueueRecord)); if (q == NULL) printf("Out of memory space\n"); else MakeEmptyQueue(q); return q; } /*This function sets the queue size to 0, and creates a dummy element and sets the front and rear point to this dummy element*/ void MakeEmptyQueue(Queue q) { q->size = 0; q->availability=0; q->front = (struct Node *) malloc(sizeof(struct Node)); if (q->front == NULL) printf("Out of memory space\n"); else{ q->front->next = NULL; q->rear = q->front; } } /*Shows if the queue is empty*/ int IsEmptyQueue(Queue q) { return (q->size == 0); } /*Returns the queue size*/ int QueueSize(Queue q) { return (q->size); } /*Shows the queue is full or not*/ int IsFullQueue(Queue q) { return FALSE; } /*Returns the value stored in the front of the queue*/ int FrontOfQueue(Queue q) { if (!IsEmptyQueue(q)) return q->front->next->val; else { printf("The queue is empty\n"); return -1; } } /*Returns the value stored in the rear of the queue*/ int RearOfQueue(Queue q) { if (!IsEmptyQueue(q)) return q->rear->val; else { printf("The queue is empty\n"); return -1; } } /*Displays the content of the queue*/ void DisplayQueue(Queue q) { struct Node *pos; pos=q->front->next; printf("Queue content:\n"); printf("-->Priority Value\n"); while (pos != NULL) { printf("--> %d\t %d\n", pos->priority, pos->val); pos = pos->next; } } void enqueue(Queue q, int element, int priority){ if(IsFullQueue(q)){ printf("Error queue is full"); } else{ q->rear->next=(struct Node *)malloc(sizeof(struct Node)); q->rear=q->rear->next; q->rear->next=NULL; q->rear->val=element; q->rear->priority=priority; q->size++; } } void sortedenqueue(Queue q, int val, int priority) { struct Node *insert,*temp; insert=(struct Node *)malloc(sizeof(struct Node)); insert->val=val; insert->priority=priority; temp=q->front; if(q->size==0){ enqueue(q, val, priority); } else{ while(temp->next!=NULL && temp->next->priority<insert->priority){ temp=temp->next; } //printf("%d",temp->priority); insert->next=temp->next; temp->next=insert; q->size++; if(insert->next==NULL){ q->rear=insert; } } } niyazi dequeue(Queue q) { niyazi del; niyazi deli; del=(niyazi)malloc(sizeof(struct Node)); deli=(niyazi)malloc(sizeof(struct Node)); if(IsEmptyQueue(q)){ printf("Queue is empty!"); return NULL; } else { del=q->front->next; q->front->next=del->next; deli->val=del->val; deli->priority=del->priority; free(del); q->size--; return deli; } } void sorteddequeue(Queue q) { struct Node *temp; struct Node *min; temp=q->front->next; min=q->front; int i; for(i=1;i<q->size;i++) { if(temp->next->priority<min->next->priority) { min=temp; } temp=temp->next; } temp=min->next; min->next=min->next->next; free(temp); if(min->next==NULL){ q->rear=min; } q->size--; } void tellerzfunctionz(Queue *a, Queue b, int c, int d){ int i; int value=0; int priority; niyazi temp; temp=(niyazi)malloc(sizeof(struct Node)); if(c==1){ for(i=0;i<d;i++){ temp=dequeue(b); sortedenqueue((*(a)),temp->val,temp->priority); } } else{ for(i=0;i<d;i++){ while(b->front->next->val==1){ if((*(a+value))->availability==1){ temp=dequeue(b); sortedenqueue((*(a+value)),temp->val,temp->priority); (*(a+value))->rear->val=2; } else{ value++; } } } } } //end of the program

  Read the article

• Why is Postfix trying to connect to other machines SMTP port 25?

  - by TryTryAgain

  Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.101]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.101]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3085]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3086]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3086]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3087]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3084]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3088]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.135]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Is this a DNS thing, doubtful as I've changed from our local DNS to Google's..still Postfix will occasionally try and connect to ab.xyz.com from a variety of addresses that may or may not have port 25 open and act as mail servers to begin with. Why is Postfix attempting to connect to other machines as seen in the log? Mail is being sent properly, other than that, it appears all is good. Occasionally I'll also see: relay postfix/error[3090]: 3F1AB42132: to=, relay=none, delay=32754, delays=32724/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.102]:25: Connection refused) I have Postfix setup with very little restrictions: mynetworks = 127.0.0.0/8, 10.0.0.0/8 only. Like I said it appears all mail is getting passed through, but I hate seeing errors and it is confusing me as to why it would be attempting to connect to other machines as seen in the log. Some Output of cat /var/log/mail.log|grep 3F1AB42132 Jul 5 02:04:01 relay postfix/smtpd[1653]: 3F1AB42132: client=unknown[10.41.0.109] Jul 5 02:04:01 relay postfix/cleanup[1655]: 3F1AB42132: message-id= Jul 5 02:04:01 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:04:31 relay postfix/smtp[1634]: 3F1AB42132: to=, relay=none, delay=30, delays=0.02/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.110]:25: Connection refused) Jul 5 02:13:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:14:28 relay postfix/smtp[1681]: 3F1AB42132: to=, relay=none, delay=628, delays=598/0.01/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.247]:25: Connection refused) Jul 5 02:28:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:29:28 relay postfix/smtp[1684]: 3F1AB42132: to=, relay=none, delay=1527, delays=1497/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.135]:25: Connection refused) Jul 5 02:58:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:59:28 relay postfix/smtp[1739]: 3F1AB42132: to=, relay=none, delay=3327, delays=3297/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.40.40.130]:25: Connection timed out) Jul 5 03:58:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 03:59:28 relay postfix/smtp[1839]: 3F1AB42132: to=, relay=none, delay=6928, delays=6897/0.03/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 04:11:03 relay postfix/qmgr[2039]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 04:11:33 relay postfix/error[2093]: 3F1AB42132: to=, relay=none, delay=7653, delays=7622/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 05:21:03 relay postfix/qmgr[2039]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 05:21:33 relay postfix/error[2217]: 3F1AB42132: to=, relay=none, delay=11853, delays=11822/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 06:29:25 relay postfix/qmgr[2420]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 06:29:55 relay postfix/error[2428]: 3F1AB42132: to=, relay=none, delay=15954, delays=15924/30/0/0.08, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 07:39:24 relay postfix/qmgr[2885]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 07:39:54 relay postfix/error[2936]: 3F1AB42132: to=, relay=none, delay=20153, delays=20123/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out)

  Read the article

• Azure &ndash; Part 6 &ndash; Blob Storage Service

  - by Shaun

  When migrate your application onto the Azure one of the biggest concern would be the external files. In the original way we understood and ensure which machine and folder our application (website or web service) is located in. So that we can use the MapPath or some other methods to read and write the external files for example the images, text files or the xml files, etc. But things have been changed when we deploy them on Azure. Azure is not a server, or a single machine, it’s a set of virtual server machine running under the Azure OS. And even worse, your application might be moved between thses machines. So it’s impossible to read or write the external files on Azure. In order to resolve this issue the Windows Azure provides another storage serviec – Blob, for us. Different to the table service, the blob serivce is to be used to store text and binary data rather than the structured data. It provides two types of blobs: Block Blobs and Page Blobs. Block Blobs are optimized for streaming. They are comprised of blocks, each of which is identified by a block ID and each block can be a maximum of 4 MB in size. Page Blobs are are optimized for random read/write operations and provide the ability to write to a range of bytes in a blob. They are a collection of pages. The maximum size for a page blob is 1 TB.   In the managed library the Azure SDK allows us to communicate with the blobs through these classes CloudBlobClient, CloudBlobContainer, CloudBlockBlob and the CloudPageBlob. Similar with the table service managed library, the CloudBlobClient allows us to reach the blob service by passing our storage account information and also responsible for creating the blob container is not exist. Then from the CloudBlobContainer we can save or load the block blobs and page blobs into the CloudBlockBlob and the CloudPageBlob classes.   Let’s improve our exmaple in the previous posts – add a service method allows the user to upload the logo image. In the server side I created a method name UploadLogo with 2 parameters: email and image. Then I created the storage account from the config file. I also add the validation to ensure that the email passed in is valid. 1: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 2: var accountContext = new DynamicDataContext<Account>(storageAccount); 3:  4: // validation 5: var accountNumber = accountContext.Load() 6: .Where(a => a.Email == email) 7: .ToList() 8: .Count; 9: if (accountNumber <= 0) 10: { 11: throw new ApplicationException(string.Format("Cannot find the account with the email {0}.", email)); 12: } Then there are three steps for saving the image into the blob service. First alike the table service I created the container with a unique name and create it if it’s not exist. 1: // create the blob container for account logos if not exist 2: CloudBlobClient blobStorage = storageAccount.CreateCloudBlobClient(); 3: CloudBlobContainer container = blobStorage.GetContainerReference("account-logo"); 4: container.CreateIfNotExist(); Then, since in this example I will just send the blob access URL back to the client so I need to open the read permission on that container. 1: // configure blob container for public access 2: BlobContainerPermissions permissions = container.GetPermissions(); 3: permissions.PublicAccess = BlobContainerPublicAccessType.Container; 4: container.SetPermissions(permissions); And at the end I combine the blob resource name from the input file name and Guid, and then save it to the block blob by using the UploadByteArray method. Finally I returned the URL of this blob back to the client side. 1: // save the blob into the blob service 2: string uniqueBlobName = string.Format("{0}_{1}.jpg", email, Guid.NewGuid().ToString()); 3: CloudBlockBlob blob = container.GetBlockBlobReference(uniqueBlobName); 4: blob.UploadByteArray(image); 5:  6: return blob.Uri.ToString(); Let’s update a bit on the client side application and see the result. Here I just use my simple console application to let the user input the email and the file name of the image. If it’s OK it will show the URL of the blob on the server side so that we can see it through the web browser. Then we can see the logo I’ve just uploaded through the URL here. You may notice that the blob URL was based on the container name and the blob unique name. In the document of the Azure SDK there’s a page for the rule of naming them, but I think the simple rule would be – they must be valid as an URL address. So that you cannot name the container with dot or slash as it will break the ADO.Data Service routing rule. For exmaple if you named the blob container as Account.Logo then it will throw an exception says 400 Bad Request.   Summary In this short entity I covered the simple usage of the blob service to save the images onto Azure. Since the Azure platform does not support the file system we have to migrate our code for reading/writing files to the blob service before deploy it to Azure. In order to reducing this effort Microsoft provided a new approch named Drive, which allows us read and write the NTFS files just likes what we did before. It’s built up on the blob serivce but more properly for files accessing. I will discuss more about it in the next post.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• lxc containers hangs after upgrade to 13.10

  - by doug123

  I have 3 lxc containers. They were all working fine on 12.10 and I upgraded the containers with do-release-upgrade on the containers to 13.04 and 13.10 and that worked great. Then I upgraded the host to 13.04 and then 13.10 and now the 3 containers hang with this: >lxc-start -n as1 -l DEBUG -o $(tty) lxc-start 1383145786.513 INFO lxc_start_ui - using rcfile /var/lib/lxc/as1/config lxc-start 1383145786.513 WARN lxc_log - lxc_log_init called with log already initialized lxc-start 1383145786.513 INFO lxc_apparmor - aa_enabled set to 1 lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/2' (5/6) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/13' (7/8) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/14' (9/10) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/15' (11/12) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/17' (13/14) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/18' (15/16) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/19' (17/18) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/20' (19/20) lxc-start 1383145786.514 INFO lxc_conf - tty's configured lxc-start 1383145786.514 DEBUG lxc_start - sigchild handler set lxc-start 1383145786.514 DEBUG lxc_console - opening /dev/tty for console peer lxc-start 1383145786.514 DEBUG lxc_console - using '/dev/tty' as console lxc-start 1383145786.514 DEBUG lxc_console - 6242 got SIGWINCH fd 25 lxc-start 1383145786.514 DEBUG lxc_console - set winsz dstfd:22 cols:177 rows:53 lxc-start 1383145786.514 INFO lxc_start - 'as1' is initialized lxc-start 1383145786.522 DEBUG lxc_start - Not dropping cap_sys_boot or watching utmp lxc-start 1383145786.524 DEBUG lxc_conf - mac address of host interface 'vethB4L35W' changed to private fe:7c:96:a0:ae:29 lxc-start 1383145786.525 DEBUG lxc_conf - instanciated veth 'vethB4L35W/vethVC61K2', index is '26' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.529 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.555 DEBUG lxc_conf - move 'eth0' to '6249' lxc-start 1383145786.555 INFO lxc_conf - 'as1' hostname has been setup lxc-start 1383145786.575 DEBUG lxc_conf - 'eth0' has been setup lxc-start 1383145786.575 INFO lxc_conf - network has been setup lxc-start 1383145786.575 INFO lxc_conf - looking at .44 42 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /. lxc-start 1383145786.575 INFO lxc_conf - looking at .52 44 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.575 INFO lxc_conf - looking at .61 52 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.575 INFO lxc_conf - looking at .68 44 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run. lxc-start 1383145786.575 INFO lxc_conf - looking at .69 68 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.575 INFO lxc_conf - looking at .72 68 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.575 INFO lxc_conf - looking at .73 68 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.575 INFO lxc_conf - looking at .76 44 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.575 INFO lxc_conf - looking at .77 76 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.575 INFO lxc_conf - looking at .78 77 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.575 INFO lxc_conf - looking at .79 77 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.575 INFO lxc_conf - looking at .80 77 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.575 INFO lxc_conf - looking at .81 77 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.575 INFO lxc_conf - looking at .82 77 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.575 INFO lxc_conf - looking at .83 77 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.575 INFO lxc_conf - looking at .84 77 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.575 INFO lxc_conf - looking at .85 77 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.575 INFO lxc_conf - looking at .94 77 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.575 INFO lxc_conf - looking at .95 77 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.575 INFO lxc_conf - looking at .96 76 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.575 INFO lxc_conf - looking at .98 76 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.575 INFO lxc_conf - looking at .101 76 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.575 INFO lxc_conf - looking at .102 76 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.575 INFO lxc_conf - looking at .103 44 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.575 INFO lxc_conf - looking at .104 44 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /data. lxc-start 1383145786.575 INFO lxc_conf - looking at .105 44 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.575 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.576 DEBUG lxc_conf - mounted '/data/srv/lxc/as1' on '/usr/lib/x86_64-linux-gnu/lxc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//dev/pts', type 'devpts' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//proc', type 'proc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//sys', type 'sysfs' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//run', type 'tmpfs' lxc-start 1383145786.576 INFO lxc_conf - mount points have been setup lxc-start 1383145786.577 INFO lxc_conf - console has been setup lxc-start 1383145786.577 INFO lxc_conf - 8 tty(s) has been setup lxc-start 1383145786.577 INFO lxc_conf - rootfs path is ./data/srv/lxc/as1., mount is ./usr/lib/x86_64-linux-gnu/lxc. lxc-start 1383145786.577 INFO lxc_apparmor - I am 1, /proc/self points to 1 lxc-start 1383145786.577 DEBUG lxc_conf - created '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' directory lxc-start 1383145786.577 DEBUG lxc_conf - mountpoint for old rootfs is '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' lxc-start 1383145786.577 DEBUG lxc_conf - pivot_root syscall to '/usr/lib/x86_64-linux-gnu/lxc' successful lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev/pts' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/lock' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/shm' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/user' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuset' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpu' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuacct' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/memory' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/devices' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/freezer' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/blkio' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/perf_event' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/hugetlb' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/systemd' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/fuse/connections' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/debug' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/security' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/pstore' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/proc' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/data' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/boot' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold' lxc-start 1383145786.577 INFO lxc_conf - created new pts instance lxc-start 1383145786.578 DEBUG lxc_conf - drop capability 'sys_boot' (22) lxc-start 1383145786.578 DEBUG lxc_conf - capabilities have been setup lxc-start 1383145786.578 NOTICE lxc_conf - 'as1' is setup. lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.578 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.578 INFO lxc_apparmor - setting up apparmor lxc-start 1383145786.578 INFO lxc_apparmor - changed apparmor profile to lxc-container-default lxc-start 1383145786.578 NOTICE lxc_start - exec'ing '/sbin/init' lxc-start 1383145786.578 INFO lxc_conf - looking at .15 20 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.578 INFO lxc_conf - looking at .16 20 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.578 INFO lxc_conf - looking at .17 20 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.578 INFO lxc_conf - looking at .18 17 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.578 INFO lxc_conf - looking at .19 20 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /run. lxc-start 1383145786.578 INFO lxc_conf - looking at .20 1 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.578 INFO lxc_conf - now p is . /. lxc-start 1383145786.578 INFO lxc_conf - looking at .22 15 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.578 INFO lxc_conf - looking at .23 15 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.578 INFO lxc_conf - looking at .24 15 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.579 INFO lxc_conf - looking at .25 15 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.579 INFO lxc_conf - looking at .26 19 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.579 INFO lxc_conf - looking at .27 19 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.579 INFO lxc_conf - looking at .28 22 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.579 INFO lxc_conf - looking at .29 19 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.579 INFO lxc_conf - looking at .30 15 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.579 INFO lxc_conf - looking at .31 22 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.579 INFO lxc_conf - looking at .32 22 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.579 INFO lxc_conf - looking at .33 22 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.579 INFO lxc_conf - looking at .34 22 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.579 INFO lxc_conf - looking at .35 22 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.579 INFO lxc_conf - looking at .36 22 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.579 INFO lxc_conf - looking at .37 22 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.579 INFO lxc_conf - looking at .38 22 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.579 INFO lxc_conf - looking at .39 20 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.579 INFO lxc_conf - now p is . /data. lxc-start 1383145786.579 INFO lxc_conf - looking at .40 20 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.579 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.579 INFO lxc_conf - looking at .41 22 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.579 NOTICE lxc_start - '/sbin/init' started with pid '6249' lxc-start 1383145786.579 WARN lxc_start - invalid pid for SIGCHLD <4>init: ureadahead main process (7) terminated with status 5 <4>init: console-font main process (94) terminated with status 1 And it will just sit there like that for hours at least. The container becomes pingable but I can't ssh and if I try lxc-console -n as1 I get a blank screen. If I do lxc-stop -n as1 or ^C in the window where it has hung I get: ^CTERM environment variable not set. <4>init: plymouth-upstart-bridge main process (192) terminated with status 1 <4>init: hwclock-save main process (187) terminated with status 70 * Asking all remaining processes to terminate... ...done. * All processes ended within 1 seconds... ...done. * Deactivating swap... ...fail! mount: cannot mount block device /dev/md2 read-only * Will now restart But after 20 minutes it hasn't restarted. Any ideas why these containers are hanging?

  Read the article

• obiee memory usage

  - by user554629

  Heap memory is a frequent customer topic. Here's the quick refresher, oriented towards AIX, but the principles apply to other unix implementations. 1. 32-bit processes have a maximum addressability of 4GB; usable application heap size of 2-3 GB.  On AIX it is controlled by an environment variable: export LDR_CNTRL=....=MAXDATA=0x080000000   # 2GB ( The leading zero is deliberate, not required )   1a. It is  possible to get 3.25GB  heap size for a 32-bit process using @DSA (Discontiguous Segment Allocation)     export LDR_CNTRL=MAXDATA=0xd0000000@DSA  # 3.25 GB 32-bit only        One side-effect of using AIX segments "c" and "d" is that shared libraries will be loaded privately, and not shared.        If you need the additional heap space, this is worth the trade-off.  This option is frequently used for 32-bit java.   1b. 64-bit processes have no need for the @DSA option. 2. 64-bit processes can double the 32-bit heap size to 4GB using: export LDR_CNTRL=....=MAXDATA=0x100000000  # 1 with 8-zeros    2a. But this setting would place the same memory limitations on obiee as a 32-bit process    2b. The major benefit of 64-bit is to break the binds of 32-bit addressing.  At a minimum, use 8GB export LDR_CNTRL=....=MAXDATA=0x200000000  # 2 with 8-zeros    2c.  Many large customers are providing extra safety to their servers by using 16GB: export LDR_CNTRL=....=MAXDATA=0x400000000  # 4 with 8-zeros There is no performance penalty for providing virtual memory allocations larger than required by the application.  - If the server only uses 2GB of space in 64-bit ... specifying 16GB just provides an upper bound cushion.    When an unexpected user query causes a sudden memory surge, the extra memory keeps the server running. 3.  The next benefit to 64-bit is that you can provide huge thread stack sizes for      strange queries that might otherwise crash the server.      nqsserver uses fast recursive algorithms to traverse complicated control structures.    This means lots of thread space to hold the stack frames.    3a. Stack frames mostly contain register values;  64-bit registers are twice as large as 32-bit          At a minimum you should  quadruple the size of the server stack threads in NQSConfig.INI          when migrating from 32- to 64-bit, to prevent a rogue query from crashing the server.           Allocate more than is normally necessary for safety.    3b. There is no penalty for allocating more stack size than you need ...           it is just virtual memory;   no real resources  are consumed until the extra space is needed.    3c. Increasing thread stack sizes may require the process heap size (MAXDATA) to be increased.          Heap space is used for dynamic memory requests, and for thread stacks.          No performance penalty to run with large heap and thread stack sizes.           In a 32-bit world, this safety would require careful planning to avoid exceeding 2GM usable storage.     3d. Increasing the number of threads also may require additional heap storage.          Most thread stack frames on obiee are allocated when the server is started,          and the real memory usage increases as threads run work. Does 2.8GB sound like a lot of memory for an AIX application server? - I guess it is what you are accustomed to seeing from "grandpa's applications". - One of the primary design goals of obiee is to trade memory for services ( db, query caches, etc) - 2.8GB is still well under the 4GB heap size allocated with MAXDATA=0x100000000 - 2.8GB process size is also possible even on 32-bit Windows applications - It is not unusual to receive a sudden request for 30MB of contiguous storage on obiee.- This is not a memory leak;  eventually the nqsserver storage will stabilize, but it may take days to do so. vmstat is the tool of choice to observe memory usage.  On AIX vmstat will show  something that may be  startling to some people ... that available free memory ( the 2nd column ) is always  trending toward zero ... no available free memory.  Some customers have concluded that "nearly zero memory free" means it is time to upgrade the server with more real memory.   After the upgrade, the server again shows very little free memory available. Should you be concerned about this?   Many customers are !!  Here is what is happening: - AIX filesystems are built on a paging model.   If you read/write a  filesystem block it is paged into memory ( no read/write system calls ) - This filesystem "page" has its own "backing store" on disk, the original filesystem block.   When the system needs the real memory page holding the file block, there is no need to "page out".    The page can be stolen immediately, because the original is still on disk in the filesystem. - The filesystem  pages tend to collect ... every filesystem block that was ever seen since    system boot is available in memory.  If another application needs the file block, it is retrieved with no physical I/O. What happens if the system does need the memory ... to satisfy a 30MB heap request by nqsserver, for example? - Since the filesystem blocks have their own backing store ( not on a paging device )   the kernel can just steal any filesystem block ... on a least-recently-used basis   to satisfy a new real memory request for "computation pages". No cause for alarm.   vmstat is accurately displaying whether all filesystem blocks have been touched, and now reside in memory.   Back to nqsserver:  when should you be worried about its memory footprint? Answer:  Almost never.   Stop monitoring it ... stop fussing over it ... stop trying to optimize it. This is a production application, and nqsserver uses the memory it requires to accomplish the job, based on demand. C'mon ... never worry?   I'm from New York ... worry is what we do best. Ok, here is the metric you should be watching, using vmstat: - Are you paging ... there are several columns of vmstat outputbash-2.04$ vmstat 3 3 System configuration: lcpu=4 mem=4096MB kthr    memory              page              faults        cpu    ----- ------------ ------------------------ ------------ -----------  r  b    avm   fre  re  pi  po  fr   sr  cy  in   sy  cs us sy id wa  0  0 208492  2600   0   0   0   0    0   0  13   45  73  0  0 99  0  0  0 208492  2600   0   0   0   0    0   0   9   12  77  0  0 99  0  0  0 208492  2600   0   0   0   0    0   0   9   40  86  0  0 99  0 avm is the "available free memory" indicator that trends toward zerore   is "re-page".  The kernel steals a real memory page for one process;  immediately repages back to original processpi  "page in".   A process memory page previously paged out, now paged back in because the process needs itpo "page out" A process memory block was paged out, because it was needed by some other process Light paging activity ( re, pi, po ) is not a concern for worry.   Processes get started, need some memory, go away. Sustained paging activity  is cause for concern.   obiee users are having a terrible day if these counters are always changing. Hang on ... if nqsserver needs that memory and I reduce MAXDATA to keep the process under control, won't the nqsserver process crash when the memory is needed? Yes it will.   It means that nqsserver is configured to require too much memory and there are  lots of options to reduce the real memory requirement.  - number of threads  - size of query cache  - size of sort But I need nqsserver to keep running. Real memory is over-committed.    Many things can cause this:- running all application processes on a single server    ... DB server, web servers, WebLogic/WebSphere, sawserver, nqsserver, etc.   You could move some of those to another host machine and communicate over the network  The need for real memory doesn't go away, it's just distributed to other host machines. - AIX LPAR is configured with too little memory.     The AIX admin needs to provide more real memory to the LPAR running obiee. - More memory to this LPAR affects other partitions. Then it's time to visit your friendly IBM rep and buy more memory.

  Read the article

• How to flip a BC6/BC7 texture?

  - by postgoodism

  I have some code to load DDS image files into OpenGL textures, and I'd like to extend it to support the BC6 and BC7 compressed formats introduced in D3D11. Since DirectX and OpenGL disagree about whether a texture's origin is in the upper-left or lower-left corner, my DDS loader flips each image's pixels along the Y axis before passing the pixels to OpenGL. Flipping compressed textures presents an additional wrinkle: in addition to flipping each row of 4x4-pixel blocks, you also need to flip the pixels within each block. I found code here to flip BC1/BC2/BC3 blocks, and from the block diagrams on MSDN it was easy to adapt the BC3-flipping code to handle BC4 and BC5. The BC6 and BC7 formats look significantly more intimidating, though. Is there a similar bit-twiddling trick to flip these formats, or would I have to fully decompress and recompress each block?

  Read the article

• how to disable usb storage in ubuntu 13.10?

  - by user288289

  I want to block my all my USB mas storage and allow only devices like keyboard and mouse . I'm able to do so by following the KB. But the issue is that when I connect devices like mobile phones & TABS, I'm able to access the mass storage & able to copy & paste. Disable usb mass storage Kindly advise me how could I block these mobile storage devices. Please note that I only want to block mass storage the other features like charging & android apk execution to mobile should work as usually. Please help...

  Read the article

• How to Achieve Real-Time Data Protection and Availabilty....For Real

  - by JoeMeeks

  There is a class of business and mission critical applications where downtime or data loss have substantial negative impact on revenue, customer service, reputation, cost, etc. Because the Oracle Database is used extensively to provide reliable performance and availability for this class of application, it also provides an integrated set of capabilities for real-time data protection and availability. Active Data Guard, depicted in the figure below, is the cornerstone for accomplishing these objectives because it provides the absolute best real-time data protection and availability for the Oracle Database. This is a bold statement, but it is supported by the facts. It isn’t so much that alternative solutions are bad, it’s just that their architectures prevent them from achieving the same levels of data protection, availability, simplicity, and asset utilization provided by Active Data Guard. Let’s explore further. Backups are the most popular method used to protect data and are an essential best practice for every database. Not surprisingly, Oracle Recovery Manager (RMAN) is one of the most commonly used features of the Oracle Database. But comparing Active Data Guard to backups is like comparing apples to motorcycles. Active Data Guard uses a hot (open read-only), synchronized copy of the production database to provide real-time data protection and HA. In contrast, a restore from backup takes time and often has many moving parts - people, processes, software and systems – that can create a level of uncertainty during an outage that critical applications can’t afford. This is why backups play a secondary role for your most critical databases by complementing real-time solutions that can provide both data protection and availability. Before Data Guard, enterprises used storage remote-mirroring for real-time data protection and availability. Remote-mirroring is a sophisticated storage technology promoted as a generic infrastructure solution that makes a simple promise – whatever is written to a primary volume will also be written to the mirrored volume at a remote site. Keeping this promise is also what causes data loss and downtime when the data written to primary volumes is corrupt – the same corruption is faithfully mirrored to the remote volume making both copies unusable. This happens because remote-mirroring is a generic process. It has no  intrinsic knowledge of Oracle data structures to enable advanced protection, nor can it perform independent Oracle validation BEFORE changes are applied to the remote copy. There is also nothing to prevent human error (e.g. a storage admin accidentally deleting critical files) from also impacting the remote mirrored copy. Remote-mirroring tricks users by creating a false impression that there are two separate copies of the Oracle Database. In truth; while remote-mirroring maintains two copies of the data on different volumes, both are part of a single closely coupled system. Not only will remote-mirroring propagate corruptions and administrative errors, but the changes applied to the mirrored volume are a result of the same Oracle code path that applied the change to the source volume. There is no isolation, either from a storage mirroring perspective or from an Oracle software perspective.  Bottom line, storage remote-mirroring lacks both the smarts and isolation level necessary to provide true data protection. Active Data Guard offers much more than storage remote-mirroring when your objective is protecting your enterprise from downtime and data loss. Like remote-mirroring, an Active Data Guard replica is an exact block for block copy of the primary. Unlike remote-mirroring, an Active Data Guard replica is NOT a tightly coupled copy of the source volumes - it is a completely independent Oracle Database. Active Data Guard’s inherent knowledge of Oracle data block and redo structures enables a separate Oracle Database using a different Oracle code path than the primary to use the full complement of Oracle data validation methods before changes are applied to the synchronized copy. These include: physical check sum, logical intra-block checking, lost write validation, and automatic block repair. The figure below illustrates the stark difference between the knowledge that remote-mirroring can discern from an Oracle data block and what Active Data Guard can discern. An Active Data Guard standby also provides a range of additional services enabled by the fact that it is a running Oracle Database - not just a mirrored copy of data files. An Active Data Guard standby database can be open read-only while it is synchronizing with the primary. This enables read-only workloads to be offloaded from the primary system and run on the active standby - boosting performance by utilizing all assets. An Active Data Guard standby can also be used to implement many types of system and database maintenance in rolling fashion. Maintenance and upgrades are first implemented on the standby while production runs unaffected at the primary. After the primary and standby are synchronized and all changes have been validated, the production workload is quickly switched to the standby. The only downtime is the time required for user connections to transfer from one system to the next. These capabilities further expand the expectations of availability offered by a data protection solution beyond what is possible to do using storage remote-mirroring. So don’t be fooled by appearances.  Storage remote-mirroring and Active Data Guard replication may look similar on the surface - but the devil is in the details. Only Active Data Guard has the smarts, the isolation, and the simplicity, to provide the best data protection and availability for the Oracle Database. Stay tuned for future blog posts that dive into the many differences between storage remote-mirroring and Active Data Guard along the dimensions of data protection, data availability, cost, asset utilization and return on investment. For additional information on Active Data Guard, see: Active Data Guard Technical White Paper Active Data Guard vs Storage Remote-Mirroring Active Data Guard Home Page on the Oracle Technology Network

  Read the article

• SSD Tweaks for Ubuntu 12.04

  - by Mustafa Erdinç

  I need to tweak my Dell XPS 13z SSD for maximum performance and life cycle than I read the solutions explained here, but it is for 11.10 and my fstab is different. For now my fstab is looks like this: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=abf5ce9e-bdb7-4b2f-a7bd-bbd9efa72a98 / ext4 errors=remount-ro 0 1 # /home was on /dev/sda2 during installation UUID=491427b2-7482-4483-b6eb-7c564b991aff /home ext4 defaults 0 2 # swap was on /dev/sda3 during installation #UUID=7551000d-e708-4e0f-9fd2-9f93119f63fb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 tmpfs /tmp tmpfs mode=1777 And my rc.local is looks like this: echo noop > /sys/block/sda/queue/scheduler echo deadline > /sys/block/sda/queue/scheduler echo 1 > /sys/block/sda/queue/iosched/fifo_batch exit 0 Do you have any suggestions, what should I do? Regards

  Read the article

• evaluating a code of a graph [migrated]

  - by mazen.r.f

  This is relatively a long code,if you have the tolerance and the will to find out how to make this code work then take a look please, i will appreciate your feed back. i have spent two days trying to come up with a code to represent a graph , then calculate the shortest path using dijkastra algorithm , but i am not able to get the right result , even the code runs without errors , but the result is not correct , always i am getting 0. briefly,i have three classes , Vertex, Edge, Graph , the Vertex class represents the nodes in the graph and it has id and carried ( which carry the weight of the links connected to it while using dijkastra algorithm ) and a vector of the ids belong to other nodes the path will go through before arriving to the node itself , this vector is named previous_nodes. the Edge class represents the edges in the graph it has two vertices ( one in each side ) and a wight ( the distance between the two vertices ). the Graph class represents the graph , it has two vectors one is the vertices included in this graph , and the other is the edges included in the graph. inside the class Graph there is a method its name shortest takes the sources node id and the destination and calculates the shortest path using dijkastra algorithm, and i think that it is the most important part of the code. my theory about the code is that i will create two vectors one for the vertices in the graph i will name it vertices and another vector its name is ver_out it will include the vertices out of calculation in the graph, also i will have two vectors of type Edge , one its name edges for all the edges in the graph and the other its name is track to contain temporarily the edges linked to the temporarily source node in every round , after the calculation of every round the vector track will be cleared. in main() i created five vertices and 10 edges to simulate a graph , the result of the shortest path supposedly to be 4 , but i am always getting 0 , that means i am having something wrong in my code , so if you are interesting in helping me find my mistake and how to make the code work , please take a look. the way shortest work is as follow at the beginning all the edges will be included in the vector edges , we select the edges related to the source and put them in the vector track , then we iterate through track and add the wight of every edge to the vertex (node ) related to it ( not the source vertex ) , then after we clear track and remove the source vertex from the vector vertices and select a new source , and start over again select the edges related to the new source , put them in track , iterate over edges in tack , adding the weights to the corresponding vertices then remove this vertex from the vector vertices, and clear track , and select a new source , and so on . here is the code. #include<iostream> #include<vector> #include <stdlib.h> // for rand() using namespace std; class Vertex { private: unsigned int id; // the name of the vertex unsigned int carried; // the weight a vertex may carry when calculating shortest path vector<unsigned int> previous_nodes; public: unsigned int get_id(){return id;}; unsigned int get_carried(){return carried;}; void set_id(unsigned int value) {id = value;}; void set_carried(unsigned int value) {carried = value;}; void previous_nodes_update(unsigned int val){previous_nodes.push_back(val);}; void previous_nodes_erase(unsigned int val){previous_nodes.erase(previous_nodes.begin() + val);}; Vertex(unsigned int init_val = 0, unsigned int init_carried = 0) :id (init_val), carried(init_carried) // constructor { } ~Vertex() {}; // destructor }; class Edge { private: Vertex first_vertex; // a vertex on one side of the edge Vertex second_vertex; // a vertex on the other side of the edge unsigned int weight; // the value of the edge ( or its weight ) public: unsigned int get_weight() {return weight;}; void set_weight(unsigned int value) {weight = value;}; Vertex get_ver_1(){return first_vertex;}; Vertex get_ver_2(){return second_vertex;}; void set_first_vertex(Vertex v1) {first_vertex = v1;}; void set_second_vertex(Vertex v2) {second_vertex = v2;}; Edge(const Vertex& vertex_1 = 0, const Vertex& vertex_2 = 0, unsigned int init_weight = 0) : first_vertex(vertex_1), second_vertex(vertex_2), weight(init_weight) { } ~Edge() {} ; // destructor }; class Graph { private: std::vector<Vertex> vertices; std::vector<Edge> edges; public: Graph(vector<Vertex> ver_vector, vector<Edge> edg_vector) : vertices(ver_vector), edges(edg_vector) { } ~Graph() {}; vector<Vertex> get_vertices(){return vertices;}; vector<Edge> get_edges(){return edges;}; void set_vertices(vector<Vertex> vector_value) {vertices = vector_value;}; void set_edges(vector<Edge> vector_ed_value) {edges = vector_ed_value;}; unsigned int shortest(unsigned int src, unsigned int dis) { vector<Vertex> ver_out; vector<Edge> track; for(unsigned int i = 0; i < edges.size(); ++i) { if((edges[i].get_ver_1().get_id() == vertices[src].get_id()) || (edges[i].get_ver_2().get_id() == vertices[src].get_id())) { track.push_back (edges[i]); edges.erase(edges.begin()+i); } }; for(unsigned int i = 0; i < track.size(); ++i) { if(track[i].get_ver_1().get_id() != vertices[src].get_id()) { track[i].get_ver_1().set_carried((track[i].get_weight()) + track[i].get_ver_2().get_carried()); track[i].get_ver_1().previous_nodes_update(vertices[src].get_id()); } else { track[i].get_ver_2().set_carried((track[i].get_weight()) + track[i].get_ver_1().get_carried()); track[i].get_ver_2().previous_nodes_update(vertices[src].get_id()); } } for(unsigned int i = 0; i < vertices.size(); ++i) if(vertices[i].get_id() == src) vertices.erase(vertices.begin() + i); // removing the sources vertex from the vertices vector ver_out.push_back (vertices[src]); track.clear(); if(vertices[0].get_id() != dis) {src = vertices[0].get_id();} else {src = vertices[1].get_id();} for(unsigned int i = 0; i < vertices.size(); ++i) if((vertices[i].get_carried() < vertices[src].get_carried()) && (vertices[i].get_id() != dis)) src = vertices[i].get_id(); //while(!edges.empty()) for(unsigned int round = 0; round < vertices.size(); ++round) { for(unsigned int k = 0; k < edges.size(); ++k) { if((edges[k].get_ver_1().get_id() == vertices[src].get_id()) || (edges[k].get_ver_2().get_id() == vertices[src].get_id())) { track.push_back (edges[k]); edges.erase(edges.begin()+k); } }; for(unsigned int n = 0; n < track.size(); ++n) if((track[n].get_ver_1().get_id() != vertices[src].get_id()) && (track[n].get_ver_1().get_carried() > (track[n].get_ver_2().get_carried() + track[n].get_weight()))) { track[n].get_ver_1().set_carried((track[n].get_weight()) + track[n].get_ver_2().get_carried()); track[n].get_ver_1().previous_nodes_update(vertices[src].get_id()); } else if(track[n].get_ver_2().get_carried() > (track[n].get_ver_1().get_carried() + track[n].get_weight())) { track[n].get_ver_2().set_carried((track[n].get_weight()) + track[n].get_ver_1().get_carried()); track[n].get_ver_2().previous_nodes_update(vertices[src].get_id()); } for(unsigned int t = 0; t < vertices.size(); ++t) if(vertices[t].get_id() == src) vertices.erase(vertices.begin() + t); track.clear(); if(vertices[0].get_id() != dis) {src = vertices[0].get_id();} else {src = vertices[1].get_id();} for(unsigned int tt = 0; tt < edges.size(); ++tt) { if(vertices[tt].get_carried() < vertices[src].get_carried()) { src = vertices[tt].get_id(); } } } return vertices[dis].get_carried(); } }; int main() { cout<< "Hello, This is a graph"<< endl; vector<Vertex> vers(5); vers[0].set_id(0); vers[1].set_id(1); vers[2].set_id(2); vers[3].set_id(3); vers[4].set_id(4); vector<Edge> eds(10); eds[0].set_first_vertex(vers[0]); eds[0].set_second_vertex(vers[1]); eds[0].set_weight(5); eds[1].set_first_vertex(vers[0]); eds[1].set_second_vertex(vers[2]); eds[1].set_weight(9); eds[2].set_first_vertex(vers[0]); eds[2].set_second_vertex(vers[3]); eds[2].set_weight(4); eds[3].set_first_vertex(vers[0]); eds[3].set_second_vertex(vers[4]); eds[3].set_weight(6); eds[4].set_first_vertex(vers[1]); eds[4].set_second_vertex(vers[2]); eds[4].set_weight(2); eds[5].set_first_vertex(vers[1]); eds[5].set_second_vertex(vers[3]); eds[5].set_weight(5); eds[6].set_first_vertex(vers[1]); eds[6].set_second_vertex(vers[4]); eds[6].set_weight(7); eds[7].set_first_vertex(vers[2]); eds[7].set_second_vertex(vers[3]); eds[7].set_weight(1); eds[8].set_first_vertex(vers[2]); eds[8].set_second_vertex(vers[4]); eds[8].set_weight(8); eds[9].set_first_vertex(vers[3]); eds[9].set_second_vertex(vers[4]); eds[9].set_weight(3); unsigned int path; Graph graf(vers, eds); path = graf.shortest(2, 4); cout<< path << endl; return 0; }

  Read the article

• Evaluating code for a graph [migrated]

  - by mazen.r.f

  This is relatively long code. Please take a look at this code if you are still willing to do so. I will appreciate your feedback. I have spent two days trying to come up with code to represent a graph, calculating the shortest path using Dijkstra's algorithm. But I am not able to get the right result, even though the code runs without errors. The result is not correct and I am always getting 0. I have three classes: Vertex, Edge, and Graph. The Vertex class represents the nodes in the graph and it has id and carried (which carry the weight of the links connected to it while using Dijkstra's algorithm) and a vector of the ids belong to other nodes the path will go through before arriving to the node itself. This vector is named previous_nodes. The Edge class represents the edges in the graph and has two vertices (one in each side) and a width (the distance between the two vertices). The Graph class represents the graph. It has two vectors, where one is the vertices included in this graph, and the other is the edges included in the graph. Inside the class Graph, there is a method named shortest() that takes the sources node id and the destination and calculates the shortest path using Dijkstra's algorithm. I think that it is the most important part of the code. My theory about the code is that I will create two vectors, one for the vertices in the graph named vertices, and another vector named ver_out (it will include the vertices out of calculation in the graph). I will also have two vectors of type Edge, where one is named edges (for all the edges in the graph), and the other is named track (to temporarily contain the edges linked to the temporary source node in every round). After the calculation of every round, the vector track will be cleared. In main(), I've created five vertices and 10 edges to simulate a graph. The result of the shortest path supposedly is 4, but I am always getting 0. That means I have something wrong in my code. If you are interesting in helping me find my mistake and making the code work, please take a look. The way shortest work is as follow: at the beginning, all the edges will be included in the vector edges. We select the edges related to the source and put them in the vector track, then we iterate through track and add the width of every edge to the vertex (node) related to it (not the source vertex). After that, we clear track and remove the source vertex from the vector vertices and select a new source. Then we start over again and select the edges related to the new source, put them in track, iterate over edges in track, adding the weights to the corresponding vertices, then remove this vertex from the vector vertices. Then clear track, and select a new source, and so on. #include<iostream> #include<vector> #include <stdlib.h> // for rand() using namespace std; class Vertex { private: unsigned int id; // the name of the vertex unsigned int carried; // the weight a vertex may carry when calculating shortest path vector<unsigned int> previous_nodes; public: unsigned int get_id(){return id;}; unsigned int get_carried(){return carried;}; void set_id(unsigned int value) {id = value;}; void set_carried(unsigned int value) {carried = value;}; void previous_nodes_update(unsigned int val){previous_nodes.push_back(val);}; void previous_nodes_erase(unsigned int val){previous_nodes.erase(previous_nodes.begin() + val);}; Vertex(unsigned int init_val = 0, unsigned int init_carried = 0) :id (init_val), carried(init_carried) // constructor { } ~Vertex() {}; // destructor }; class Edge { private: Vertex first_vertex; // a vertex on one side of the edge Vertex second_vertex; // a vertex on the other side of the edge unsigned int weight; // the value of the edge ( or its weight ) public: unsigned int get_weight() {return weight;}; void set_weight(unsigned int value) {weight = value;}; Vertex get_ver_1(){return first_vertex;}; Vertex get_ver_2(){return second_vertex;}; void set_first_vertex(Vertex v1) {first_vertex = v1;}; void set_second_vertex(Vertex v2) {second_vertex = v2;}; Edge(const Vertex& vertex_1 = 0, const Vertex& vertex_2 = 0, unsigned int init_weight = 0) : first_vertex(vertex_1), second_vertex(vertex_2), weight(init_weight) { } ~Edge() {} ; // destructor }; class Graph { private: std::vector<Vertex> vertices; std::vector<Edge> edges; public: Graph(vector<Vertex> ver_vector, vector<Edge> edg_vector) : vertices(ver_vector), edges(edg_vector) { } ~Graph() {}; vector<Vertex> get_vertices(){return vertices;}; vector<Edge> get_edges(){return edges;}; void set_vertices(vector<Vertex> vector_value) {vertices = vector_value;}; void set_edges(vector<Edge> vector_ed_value) {edges = vector_ed_value;}; unsigned int shortest(unsigned int src, unsigned int dis) { vector<Vertex> ver_out; vector<Edge> track; for(unsigned int i = 0; i < edges.size(); ++i) { if((edges[i].get_ver_1().get_id() == vertices[src].get_id()) || (edges[i].get_ver_2().get_id() == vertices[src].get_id())) { track.push_back (edges[i]); edges.erase(edges.begin()+i); } }; for(unsigned int i = 0; i < track.size(); ++i) { if(track[i].get_ver_1().get_id() != vertices[src].get_id()) { track[i].get_ver_1().set_carried((track[i].get_weight()) + track[i].get_ver_2().get_carried()); track[i].get_ver_1().previous_nodes_update(vertices[src].get_id()); } else { track[i].get_ver_2().set_carried((track[i].get_weight()) + track[i].get_ver_1().get_carried()); track[i].get_ver_2().previous_nodes_update(vertices[src].get_id()); } } for(unsigned int i = 0; i < vertices.size(); ++i) if(vertices[i].get_id() == src) vertices.erase(vertices.begin() + i); // removing the sources vertex from the vertices vector ver_out.push_back (vertices[src]); track.clear(); if(vertices[0].get_id() != dis) {src = vertices[0].get_id();} else {src = vertices[1].get_id();} for(unsigned int i = 0; i < vertices.size(); ++i) if((vertices[i].get_carried() < vertices[src].get_carried()) && (vertices[i].get_id() != dis)) src = vertices[i].get_id(); //while(!edges.empty()) for(unsigned int round = 0; round < vertices.size(); ++round) { for(unsigned int k = 0; k < edges.size(); ++k) { if((edges[k].get_ver_1().get_id() == vertices[src].get_id()) || (edges[k].get_ver_2().get_id() == vertices[src].get_id())) { track.push_back (edges[k]); edges.erase(edges.begin()+k); } }; for(unsigned int n = 0; n < track.size(); ++n) if((track[n].get_ver_1().get_id() != vertices[src].get_id()) && (track[n].get_ver_1().get_carried() > (track[n].get_ver_2().get_carried() + track[n].get_weight()))) { track[n].get_ver_1().set_carried((track[n].get_weight()) + track[n].get_ver_2().get_carried()); track[n].get_ver_1().previous_nodes_update(vertices[src].get_id()); } else if(track[n].get_ver_2().get_carried() > (track[n].get_ver_1().get_carried() + track[n].get_weight())) { track[n].get_ver_2().set_carried((track[n].get_weight()) + track[n].get_ver_1().get_carried()); track[n].get_ver_2().previous_nodes_update(vertices[src].get_id()); } for(unsigned int t = 0; t < vertices.size(); ++t) if(vertices[t].get_id() == src) vertices.erase(vertices.begin() + t); track.clear(); if(vertices[0].get_id() != dis) {src = vertices[0].get_id();} else {src = vertices[1].get_id();} for(unsigned int tt = 0; tt < edges.size(); ++tt) { if(vertices[tt].get_carried() < vertices[src].get_carried()) { src = vertices[tt].get_id(); } } } return vertices[dis].get_carried(); } }; int main() { cout<< "Hello, This is a graph"<< endl; vector<Vertex> vers(5); vers[0].set_id(0); vers[1].set_id(1); vers[2].set_id(2); vers[3].set_id(3); vers[4].set_id(4); vector<Edge> eds(10); eds[0].set_first_vertex(vers[0]); eds[0].set_second_vertex(vers[1]); eds[0].set_weight(5); eds[1].set_first_vertex(vers[0]); eds[1].set_second_vertex(vers[2]); eds[1].set_weight(9); eds[2].set_first_vertex(vers[0]); eds[2].set_second_vertex(vers[3]); eds[2].set_weight(4); eds[3].set_first_vertex(vers[0]); eds[3].set_second_vertex(vers[4]); eds[3].set_weight(6); eds[4].set_first_vertex(vers[1]); eds[4].set_second_vertex(vers[2]); eds[4].set_weight(2); eds[5].set_first_vertex(vers[1]); eds[5].set_second_vertex(vers[3]); eds[5].set_weight(5); eds[6].set_first_vertex(vers[1]); eds[6].set_second_vertex(vers[4]); eds[6].set_weight(7); eds[7].set_first_vertex(vers[2]); eds[7].set_second_vertex(vers[3]); eds[7].set_weight(1); eds[8].set_first_vertex(vers[2]); eds[8].set_second_vertex(vers[4]); eds[8].set_weight(8); eds[9].set_first_vertex(vers[3]); eds[9].set_second_vertex(vers[4]); eds[9].set_weight(3); unsigned int path; Graph graf(vers, eds); path = graf.shortest(2, 4); cout<< path << endl; return 0; }

  Read the article

• How-to read data from selected tree node

  - by Frank Nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By default, the SelectionListener property of an ADF bound tree points to the makeCurrent method of the FacesCtrlHierBinding class in ADF to synchronize the current row in the ADF binding layer with the selected tree node. To customize the selection behavior, or just to read the selected node value in Java, you override the default configuration with an EL string pointing to a managed bean method property. In the following I show how you change the selection listener while preserving the default ADF selection behavior. To change the SelectionListener, select the tree component in the Structure Window and open the Oracle JDeveloper Property Inspector. From the context menu, select the Edit option to create a new listener method in a new or an existing managed bean. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} For this example, I created a new managed bean. On tree node select, the managed bean code prints the selected tree node value(s) import java.util.List; import javax.el.ELContext; import javax.el.ExpressionFactory; import javax.el.MethodExpression; import javax.faces.application.Application; import javax.faces.context.FacesContext; import java.util.Iterator; import oracle.adf.view.rich.component.rich.data.RichTree; import oracle.jbo.Row; import oracle.jbo.uicli.binding.JUCtrlHierBinding; import oracle.jbo.uicli.binding.JUCtrlHierNodeBinding; import org.apache.myfaces.trinidad.event.SelectionEvent; import org.apache.myfaces.trinidad.model.CollectionModel; import org.apache.myfaces.trinidad.model.RowKeySet; import org.apache.myfaces.trinidad.model.TreeModel; public class TreeSampleBean { public TreeSampleBean() {} public void onTreeSelect(SelectionEvent selectionEvent) { //original selection listener set by ADF //#{bindings.allDepartments.treeModel.makeCurrent} String adfSelectionListener = "#{bindings.allDepartments.treeModel.makeCurrent}";   //make sure the default selection listener functionality is //preserved. you don't need to do this for multi select trees //as the ADF binding only supports single current row selection     /* START PRESERVER DEFAULT ADF SELECT BEHAVIOR */ FacesContext fctx = FacesContext.getCurrentInstance(); Application application = fctx.getApplication(); ELContext elCtx = fctx.getELContext(); ExpressionFactory exprFactory = application.getExpressionFactory();   MethodExpression me = null;   me = exprFactory.createMethodExpression(elCtx, adfSelectionListener,                                           Object.class, newClass[]{SelectionEvent.class});   me.invoke(elCtx, new Object[] { selectionEvent });     /* END PRESERVER DEFAULT ADF SELECT BEHAVIOR */   RichTree tree = (RichTree)selectionEvent.getSource(); TreeModel model = (TreeModel)tree.getValue();  //get selected nodes RowKeySet rowKeySet = selectionEvent.getAddedSet();   Iterator rksIterator = rowKeySet.iterator();   //for single select configurations,this only is called once   while (rksIterator.hasNext()) {     List key = (List)rksIterator.next();     JUCtrlHierBinding treeBinding = null;     CollectionModel collectionModel = (CollectionModel)tree.getValue();     treeBinding = (JUCtrlHierBinding)collectionModel.getWrappedData();     JUCtrlHierNodeBinding nodeBinding = null;     nodeBinding = treeBinding.findNodeByKeyPath(key);     Row rw = nodeBinding.getRow();     //print first row attribute. Note that in a tree you have to     //determine the node type if you want to select node attributes     //by name and not index      String rowType = rw.getStructureDef().getDefName();       if(rowType.equalsIgnoreCase("DepartmentsView")){      System.out.println("This row is a department: " +                          rw.getAttribute("DepartmentId"));     }     else if(rowType.equalsIgnoreCase("EmployeesView")){      System.out.println("This row is an employee: " +                          rw.getAttribute("EmployeeId"));     }        else{       System.out.println("Huh????");     }     // ... do more useful stuff here   } } -------------------- Download JDeveloper 11.1.2.1 Sample Workspace

  Read the article

• How can I optimise ext4 for reliability?

  - by amin

  As ext4 was introduced as more reliable than ext3 with block journals, is there any chance to suppose it 100% reliable? What if enabling block journaling on it, which is disabled by default? As friend's guide to explain my case in more detail: I have an embedded linux device, after installation keyboard and monitor is detached and it works standalone. My duty is to make sure it has reliable file-system so with errors there is no way for manual correct faults on device. I can't force my customer to use a ups with each device to ensure no fault by power-failure. What more can ext4 offer me besides block journaling? Thanks in advance.

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• ASP.Net MVC Interview Questions and Answers

  - by Samir R. Bhogayta

  About ASP.Net MVC The ASP.Net MVC is the framework provided by Microsoft that lets you develop the applications that follows the principles of Model-View-Controller (MVC) design pattern. The .Net programmers new to MVC thinks that it is similar to WebForms Model (Normal ASP.Net), but it is far different from the WebForms programming.  This article will tell you how to quick learn the basics of MVC along with some frequently asked interview questions and answers on ASP.Net MVC 1. What is ASP.Net MVC The ASP.Net MVC is the framework provided by Microsoft to achieve     separation of concerns that leads to easy maintainability of the     application. Model is supposed to handle data related activity View deals with user interface related work Controller is meant for managing the application flow by communicating between Model and View. Normal 0 false false false EN-US X-NONE X-NONE 2. Why to use ASP.Net MVC The strength of MVC (i.e. ASP.Net MVC) listed below will answer this question MVC reduces the dependency between the components; this makes your code more testable. MVC does not recommend use of server controls, hence the processing time required to generate HTML response is drastically reduced. The integration of java script libraries like jQuery, Microsoft MVC becomes easy as compared to Webforms approach. 3. What do you mean by Razor The Razor is the new View engine introduced in MVC 3.0. The View engine is responsible for processing the view files [e.g. .aspx, .cshtml] in order to generate HTML response. The previous versions of MVC were dependent on ASPX view engine.  4. Can we use ASPX view engine in latest versions of MVC Yes. The Recommended way is to prefer Razor View 5. What are the benefits of Razor View?      The syntax for server side code is simplified      The length of code is drastically reduced      Razor syntax is easy to learn and reduces the complexity Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} 6. What is the extension of Razor View file? .cshtml (for c#) and .vbhtml (for vb) 7. How to create a Controller in MVC Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Create a simple class and extend it from Controller class. The bare minimum requirement for a class to become a controller is to inherit it from ControllerBase is the class that is required to inherit to create the controller but Controller class inherits from ControllerBase. 8. How to create an Action method in MVC Add a simple method inside a controller class with ActionResult return type. 9. How to access a view on the server    The browser generates the request in which the information like Controller name, Action Name and Parameters are provided, when server receives this URL it resolves the Name of Controller and Action, after that it calls the specified action with provided parameters. Action normally does some processing and returns the ViewResult by specifying the view name (blank name searches according to naming conventions).   10. What is the default Form method (i.e. GET, POST) for an action method GET. To change this you can add an action level attribute e.g [HttpPost] Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} 11. What is a Filter in MVC? When user (browser) sends a request to server an action method of a controller gets invoked; sometimes you may require executing a custom code before or after action method gets invoked, this custom code is called as Filter. 12. What are the different types of Filters in MVC? a. Authorization filter b. Action filter c. Result filter d. Exception filter [Do not forget the order mentioned above as filters gets executed as per above mentioned sequence] 13. Explain the use of Filter with an example? Suppose you are working on a MVC application where URL is sent in an encrypted format instead of a plain text, once encrypted URL is received by server it will ignore action parameters because of URL encryption. To solve this issue you can create global action filter by overriding OnActionExecuting method of controller class, in this you can extract the action parameters from the encrypted URL and these parameters can be set on filterContext to send plain text parameters to the actions.     14. What is a HTML helper? A HTML helper is a method that returns string; return string usually is the HTML tag. The standard HTML helpers (e.g. Html.BeginForm(),Html.TextBox()) available in MVC are lightweight as it does not rely on event model or view state as that of in ASP.Net server controls.

  Read the article

• how to make ext4 more reliable?

  - by amin

  hi dears as ext4 introduced more reliable than ext3 with block journals, is there any chance to suppose it 100% reliable? what if enabling block journaling on it, which is disabled by default? as friend's guide to explain my case in more detail: i have an embedded linux device, after installation keyboard and monitor is detached and it works standalone. my duty is to make sure it has reliable file-system so with errors there is no way to fsck on device. i can't force my customer to use a ups with each device to ensure no fault by power-failure. what can you offer me more than enabling block journaling? thanks in advance

  Read the article

• How do I implement SkyBox in xna 4.0 Reach Profile (for Windows Phone 7)?

  - by Biny

  I'm trying to Implement SkyBox in my phone game. Most of the samples in the web are for HiDef profile, and they are using custom effects (that not supported on Windows Phone). I've tried to follow this guide. But for some reason my SkyBox is not rendered. This is my SkyBox class: using System; using System.Collections.Generic; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Rocuna.Core; using Rocuna.GameEngine.Graphics; using Rocuna.GameEngine.Graphics.Components; namespace Rocuna.GameEngine.Extension.WP7.Graphics { /// <summary> /// Sky box element for phone games. /// </summary> public class SkyBox : SkyBoxBase { /// <summary> /// Initializes a new instance of the <see cref="SkyBoxBase"/> class. /// </summary> /// <param name="game">The Game that the game component should be attached to.</param> public SkyBox(TextureCube cube, Game game) : base(game) { Cube = cube; CubeFaces = new Texture2D[6]; PositionOffset = new Vector3(20, 20, 20); CreateGraphic(512); StripTexturesFromCube(); InitializeData(Game.GraphicsDevice); } #region Properties /// <summary> /// Gets or sets the position offset. /// </summary> /// <value> /// The position offset. /// </value> public Vector3 PositionOffset { get; set; } /// <summary> /// Gets or sets the position. /// </summary> /// <value> /// The position. /// </value> public Vector3 Position { get; set; } /// <summary> /// Gets or sets the cube. /// </summary> /// <value> /// The cube. /// </value> public TextureCube Cube { get; set; } /// <summary> /// Gets or sets the pixel array. /// </summary> /// <value> /// The pixel array. /// </value> public Color[] PixelArray { get; set; } /// <summary> /// Gets or sets the cube faces. /// </summary> /// <value> /// The cube faces. /// </value> public Texture2D[] CubeFaces { get; set; } /// <summary> /// Gets or sets the vertex buffer. /// </summary> /// <value> /// The vertex buffer. /// </value> public VertexBuffer VertexBuffer { get; set; } /// <summary> /// Gets or sets the index buffer. /// </summary> /// <value> /// The index buffer. /// </value> public IndexBuffer IndexBuffer { get; set; } /// <summary> /// Gets or sets the effect. /// </summary> /// <value> /// The effect. /// </value> public BasicEffect Effect { get; set; } #endregion protected override void LoadContent() { } public override void Update(GameTime gameTime) { var camera = Game.GetService<GraphicManager>().CurrentCamera; this.Position = camera.Position + PositionOffset; base.Update(gameTime); } public override void Draw(GameTime gameTime) { DrawOrder = int.MaxValue; var graphics = Effect.GraphicsDevice; graphics.DepthStencilState = new DepthStencilState() { DepthBufferEnable = false }; graphics.RasterizerState = new RasterizerState() { CullMode = CullMode.None }; graphics.BlendState = new BlendState(); graphics.SamplerStates[0] = SamplerState.AnisotropicClamp; graphics.SetVertexBuffer(VertexBuffer); graphics.Indices = IndexBuffer; Effect.Texture = CubeFaces[0]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 0, 2); Effect.Texture = CubeFaces[1]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 6, 2); Effect.Texture = CubeFaces[2]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 12, 2); Effect.Texture = CubeFaces[3]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 18, 2); Effect.Texture = CubeFaces[4]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 24, 2); Effect.Texture = CubeFaces[5]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 30, 2); base.Draw(gameTime); } #region Fields private List<VertexPositionNormalTexture> _vertices = new List<VertexPositionNormalTexture>(); private List<ushort> _indices = new List<ushort>(); #endregion #region Private methods private void InitializeData(GraphicsDevice graphicsDevice) { VertexBuffer = new VertexBuffer(graphicsDevice, typeof(VertexPositionNormalTexture), _vertices.Count, BufferUsage.None); VertexBuffer.SetData<VertexPositionNormalTexture>(_vertices.ToArray()); // Create an index buffer, and copy our index data into it. IndexBuffer = new IndexBuffer(graphicsDevice, typeof(ushort), _indices.Count, BufferUsage.None); IndexBuffer.SetData<ushort>(_indices.ToArray()); // Create a BasicEffect, which will be used to render the primitive. Effect = new BasicEffect(graphicsDevice); Effect.TextureEnabled = true; Effect.EnableDefaultLighting(); } private void CreateGraphic(float size) { Vector3[] normals = { Vector3.Right, Vector3.Left, Vector3.Up, Vector3.Down, Vector3.Backward, Vector3.Forward, }; Vector2[] textureCoordinates = { Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, }; var index = 0; foreach (var normal in normals) { var side1 = new Vector3(normal.Z, normal.X, normal.Y); var side2 = Vector3.Cross(normal, side1); AddIndex(CurrentVertex + 0); AddIndex(CurrentVertex + 1); AddIndex(CurrentVertex + 2); AddIndex(CurrentVertex + 0); AddIndex(CurrentVertex + 2); AddIndex(CurrentVertex + 3); AddVertex((normal - side1 - side2) * size / 2, normal, textureCoordinates[index++]); AddVertex((normal - side1 + side2) * size / 2, normal, textureCoordinates[index++]); AddVertex((normal + side1 + side2) * size / 2, normal, textureCoordinates[index++]); AddVertex((normal + side1 - side2) * size / 2, normal, textureCoordinates[index++]); } } protected void StripTexturesFromCube() { PixelArray = new Color[Cube.Size * Cube.Size]; for (int s = 0; s < CubeFaces.Length; s++) { CubeFaces[s] = new Texture2D(Game.GraphicsDevice, Cube.Size, Cube.Size, false, SurfaceFormat.Color); switch (s) { case 0: Cube.GetData<Color>(CubeMapFace.PositiveX, PixelArray); CubeFaces[s].SetData<Color>(PixelArray); break; case 1: Cube.GetData(CubeMapFace.NegativeX, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 2: Cube.GetData(CubeMapFace.PositiveY, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 3: Cube.GetData(CubeMapFace.NegativeY, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 4: Cube.GetData(CubeMapFace.PositiveZ, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 5: Cube.GetData(CubeMapFace.NegativeZ, PixelArray); CubeFaces[s].SetData(PixelArray); break; } } } protected void AddVertex(Vector3 position, Vector3 normal, Vector2 textureCoordinates) { _vertices.Add(new VertexPositionNormalTexture(position, normal, textureCoordinates)); } protected void AddIndex(int index) { if (index > ushort.MaxValue) throw new ArgumentOutOfRangeException("index"); _indices.Add((ushort)index); } protected int CurrentVertex { get { return _vertices.Count; } } #endregion } }

  Read the article

• How can I gain access to a player instance in a Minecraft mod?

  - by Andrew Graber

  I'm creating Minecraft mod with a pickaxe that takes away experience when you break a block. The method for taking away experience from a player is addExperience on EntityPlayer, so I need to get an instance of EntityPlayer for the player using my pickaxe when the pickaxe breaks a block, so that I can remove the appropriate amount of experience. My pickaxe class currently looks like this: public class ExperiencePickaxe extends ItemPickaxe { public ExperiencePickaxe(int ItemID, EnumToolMaterial material){ super(ItemID, material); } public boolean onBlockDestroyed(ItemStack par1ItemStack, World par2World, int par3, int par4, int par5, int par6, EntityLiving par7EntityLiving) { if ((double)Block.blocksList[par3].getBlockHardness(par2World, par4, par5, par6) != 0.0D) { EntityPlayer e = new EntityPlayer(); // create an instance e.addExperience(-1); } return true; } } Obviously, I cannot actually create a new EntityPlayer since it is an abstract class. How can I get access to the player using my pickaxe?

  Read the article

• Thematic map contd.

  - by jsharma

  The previous post (creating a thematic map) described the use of an advanced style (color ranged-bucket style). The bucket style definition object has an attribute ('classification') which specifies the data classification scheme to use. It's values can be one of {'equal', 'quantile', 'logarithmic', 'custom'}. We use logarithmic in the previous example. Here we'll describe how to use a custom algorithm for classification. Specifically the Jenks Natural Breaks algorithm. We'll use the Javascript implementation in geostats.js The sample code above needs a few changes which are listed below. Include the geostats.js file after or before including oraclemapsv2.js <script src="geostats.js"></script> Modify the bucket style definition to use custom classification Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}    bucketStyleDef = {       numClasses : colorSeries[colorName].classes,       classification: 'custom', //'logarithmic',  // use a logarithmic scale       algorithm: jenksFromGeostats,       styles: theStyles,       gradient:  useGradient? 'linear' : 'off'     }; The function, which implements the custom classification scheme, is specified as the algorithm attribute value. It must accept two input parameters, an array of OM.feature and the name of the feature attribute (e.g. TOTPOP) to use in the classification, and must return an array of buckets (i.e. an array of or OM.style.Bucket  or OM.style.RangedBucket in this case). However the algorithm also needs to know the number of classes (i.e. the number of buckets to create). So we use a global to pass that info in. (Note: This bug/oversight will be fixed and the custom algorithm will be passed 3 parameters: the features array, attribute name, and number of classes). So createBucketColorStyle() has the following changes Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} var numClasses ; function createBucketColorStyle( colorName, colorSeries, rangeName, useGradient) {    var theBucketStyle;    var bucketStyleDef;    var theStyles = [];    //var numClasses ; numClasses = colorSeries[colorName].classes; ... and the function jenksFromGeostats is defined as Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} function jenksFromGeostats(featureArray, columnName) {    var items = [] ; // array of attribute values to be classified    $.each(featureArray, function(i, feature) {         items.push(parseFloat(feature.getAttributeValue(columnName)));    });    // create the geostats object    var theSeries = new geostats(items);    // call getJenks which returns an array of bounds    var theClasses = theSeries.getJenks(numClasses);    if(theClasses)    {     theClasses[theClasses.length-1]=parseFloat(theClasses[theClasses.length-1])+1;    }    else    {     alert(' empty result from getJenks');    }    var theBuckets = [], aBucket=null ;    for(var k=0; k<numClasses; k++)    {             aBucket = new OM.style.RangedBucket(             {low:parseFloat(theClasses[k]),               high:parseFloat(theClasses[k+1])             });             theBuckets.push(aBucket);     }     return theBuckets; } A screenshot of the resulting map with 5 classes is shown below. It is also possible to simply create the buckets and supply them when defining the Bucket style instead of specifying the function (algorithm). In that case the bucket style definition object would be    bucketStyleDef = {      numClasses : colorSeries[colorName].classes,      classification: 'custom',        buckets: theBuckets, //since we are supplying all the buckets      styles: theStyles,      gradient:  useGradient? 'linear' : 'off'    };

  Read the article

• Can a language support something like "Retry/Fix"?

  - by Aaron Anodide

  I was just wondering if a language could support something like a Retry/Fix block? The answer to this question is probably the reason it's a bad idea or equivalent to something else, but the idea keeps popping into my head. void F() { try { G(); } fix(WrongNumber wn, out int x) { x = 1; } } void G() { int x = 0; retry<int> { if(x != 1) throw new WrongNumber(x); } } After the fix block ran, the retry block would run again...

  Read the article

• CCSpriteHole in cocos2d 2.0?

  - by rakkarage

  i was using this cocos2d class CCSpriteHole in cocos2d 1.0 fine... http://jpsarda.tumblr.com/post/15779708304/new-cocos2d-iphone-extensions-a-progress-bar-and-a i am trying to convert it to cocos2d 2.0... i got it to compile by changing glVertexPointer to glVertexAttribPointer like in the 2.0 version of CCSpriteScale9 here http://jpsarda.tumblr.com/post/9162433577/scale9grid-for-cocos2d and changing contentSizeInPixels_ to contentSize_... -(id) init { if( (self=[super init]) ) { opacityModifyRGB_ = YES; opacity_ = 255; color_ = colorUnmodified_ = ccWHITE; capSize=capSizeInPixels=CGSizeZero; //Not used blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; // update texture (calls updateBlendFunc) [self setTexture:nil]; // default transform anchor anchorPoint_ = ccp(0.5f, 0.5f); vertexDataCount=24; vertexData = (ccV2F_C4F_T2F*) malloc(vertexDataCount * sizeof(ccV2F_C4F_T2F)); [self setTextureRectInPixels:CGRectZero untrimmedSize:CGSizeZero]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture rect:(CGRect)rect { NSAssert(texture!=nil, @"Invalid texture for sprite"); // IMPORTANT: [self init] and not [super init]; if( (self = [self init]) ) { [self setTexture:texture]; [self setTextureRect:rect]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture { NSAssert(texture!=nil, @"Invalid texture for sprite"); CGRect rect = CGRectZero; rect.size = texture.contentSize; return [self initWithTexture:texture rect:rect]; } -(id) initWithFile:(NSString*)filename { NSAssert(filename!=nil, @"Invalid filename for sprite"); CCTexture2D *texture = [[CCTextureCache sharedTextureCache] addImage: filename]; if( texture ) return [self initWithTexture:texture]; return nil; } +(id)spriteWithFile:(NSString*)f { return [[self alloc] initWithFile:f]; } - (void) dealloc { if (vertexData) free(vertexData); } -(void) updateColor { ccColor4F color4; color4.r=(float)color_.r/255.0f; color4.g=(float)color_.g/255.0f; color4.b=(float)color_.b/255.0f; color4.a=(float)opacity_/255.0f; for (int i=0; i<vertexDataCount; i++) { vertexData[i].colors=color4; } } -(void)updateTextureCoords:(CGRect)rect { CCTexture2D *tex = texture_; if(!tex) return; float atlasWidth = (float)tex.pixelsWide; float atlasHeight = (float)tex.pixelsHigh; float left,right,top,bottom; left = rect.origin.x/atlasWidth; right = left + rect.size.width/atlasWidth; top = rect.origin.y/atlasHeight; bottom = top + rect.size.height/atlasHeight; // // |/|/|/| // CGSize capTexCoordsSize=CGSizeMake(capSizeInPixels.width/atlasWidth, capSizeInPixels.height/atlasHeight); // From left to right //Top band // Left vertexData[0].texCoords=(ccTex2F){left,top}; vertexData[1].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[2].texCoords=(ccTex2F){left+capTexCoordsSize.width,top}; vertexData[3].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[4].texCoords=(ccTex2F){right-capTexCoordsSize.width,top}; vertexData[5].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[6].texCoords=(ccTex2F){right,top}; vertexData[7].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Center band // Left vertexData[8].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[9].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[10].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[11].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[12].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[13].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[14].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; vertexData[15].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Bottom band //Left vertexData[16].texCoords=(ccTex2F){left,bottom}; vertexData[17].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[18].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom}; vertexData[19].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Center vertexData[20].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom}; vertexData[21].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Right vertexData[22].texCoords=(ccTex2F){right,bottom}; vertexData[23].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; } -(void) updateVertices { float left=0; //-spriteSizeInPixels.width*0.5f; float right=left+contentSize_.width; float bottom=0; //-spriteSizeInPixels.height*0.5f; float top=bottom+contentSize_.height; float holeLeft=holeRect.origin.x*CC_CONTENT_SCALE_FACTOR(); float holeRight=holeLeft+holeRect.size.width*CC_CONTENT_SCALE_FACTOR(); float holeBottom=holeRect.origin.y*CC_CONTENT_SCALE_FACTOR(); float holeTop=holeBottom+holeRect.size.height*CC_CONTENT_SCALE_FACTOR(); // // |/|/|/| // // From left to right //Top band // Left vertexData[0].vertices=(ccVertex2F){left,top}; vertexData[1].vertices=(ccVertex2F){left,holeTop}; vertexData[2].vertices=(ccVertex2F){holeLeft,top}; vertexData[3].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[4].vertices=(ccVertex2F){holeRight,top}; vertexData[5].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[6].vertices=(ccVertex2F){right,top}; vertexData[7].vertices=(ccVertex2F){right,holeTop}; //Center band // Left vertexData[8].vertices=(ccVertex2F){left,holeBottom}; vertexData[9].vertices=(ccVertex2F){left,holeTop}; vertexData[10].vertices=(ccVertex2F){holeLeft,holeBottom}; vertexData[11].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[12].vertices=(ccVertex2F){holeRight,holeBottom}; vertexData[13].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[14].vertices=(ccVertex2F){right,holeBottom}; vertexData[15].vertices=(ccVertex2F){right,holeTop}; //Bottom band //Left vertexData[16].vertices=(ccVertex2F){left,bottom}; vertexData[17].vertices=(ccVertex2F){left,holeBottom}; vertexData[18].vertices=(ccVertex2F){holeLeft,bottom}; vertexData[19].vertices=(ccVertex2F){holeLeft,holeBottom}; // Center vertexData[20].vertices=(ccVertex2F){holeRight,bottom}; vertexData[21].vertices=(ccVertex2F){holeRight,holeBottom}; // Right vertexData[22].vertices=(ccVertex2F){right,bottom}; vertexData[23].vertices=(ccVertex2F){right,holeBottom}; } -(void) setHole:(CGRect)r inRect:(CGRect)totalSurface { holeRect=r; self.contentSize=totalSurface.size; holeRect.origin=ccpSub(holeRect.origin,totalSurface.origin); CGPoint holeCenter=ccp(holeRect.origin.x+holeRect.size.width*0.5f,holeRect.origin.y+holeRect.size.height*0.5f); self.anchorPoint=ccp(holeCenter.x/contentSize_.width,holeCenter.y/contentSize_.height); //[self updateTextureCoords:rectInPixels_]; [self updateVertices]; [self updateColor]; } -(void) draw { BOOL newBlend = NO; if( blendFunc_.src != CC_BLEND_SRC || blendFunc_.dst != CC_BLEND_DST ) { newBlend = YES; glBlendFunc( blendFunc_.src, blendFunc_.dst ); } glBindTexture(GL_TEXTURE_2D, [texture_ name]); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); if( newBlend ) glBlendFunc(CC_BLEND_SRC, CC_BLEND_DST); } -(void)setTextureRectInPixels:(CGRect)rect untrimmedSize:(CGSize)untrimmedSize { rectInPixels_ = rect; rect_ = CC_RECT_PIXELS_TO_POINTS( rect ); //[self setContentSizeInPixels:untrimmedSize]; [self updateTextureCoords:rectInPixels_]; } -(void)setTextureRect:(CGRect)rect { CGRect rectInPixels = CC_RECT_POINTS_TO_PIXELS( rect ); [self setTextureRectInPixels:rectInPixels untrimmedSize:rectInPixels.size]; } // // RGBA protocol // #pragma mark CCSpriteHole - RGBA protocol -(GLubyte) opacity { return opacity_; } -(void) setOpacity:(GLubyte) anOpacity { opacity_ = anOpacity; // special opacity for premultiplied textures if( opacityModifyRGB_ ) [self setColor: (opacityModifyRGB_ ? colorUnmodified_ : color_ )]; [self updateColor]; } - (ccColor3B) color { if(opacityModifyRGB_){ return colorUnmodified_; } return color_; } -(void) setColor:(ccColor3B)color3 { color_ = colorUnmodified_ = color3; if( opacityModifyRGB_ ){ color_.r = color3.r * opacity_/255; color_.g = color3.g * opacity_/255; color_.b = color3.b * opacity_/255; } [self updateColor]; } -(void) setOpacityModifyRGB:(BOOL)modify { ccColor3B oldColor = self.color; opacityModifyRGB_ = modify; self.color = oldColor; } -(BOOL) doesOpacityModifyRGB { return opacityModifyRGB_; } #pragma mark CCSpriteHole - CocosNodeTexture protocol -(void) updateBlendFunc { if( !texture_ || ! [texture_ hasPremultipliedAlpha] ) { blendFunc_.src = GL_SRC_ALPHA; blendFunc_.dst = GL_ONE_MINUS_SRC_ALPHA; [self setOpacityModifyRGB:NO]; } else { blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; [self setOpacityModifyRGB:YES]; } } -(void) setTexture:(CCTexture2D*)texture { // accept texture==nil as argument NSAssert( !texture || [texture isKindOfClass:[CCTexture2D class]], @"setTexture expects a CCTexture2D. Invalid argument"); texture_ = texture; [self updateBlendFunc]; } -(CCTexture2D*) texture { return texture_; } @end but now positioning and scaling seem to not work? and it starts in the wrong position... but changing the opacity still works. so i was wondering if anyone can see why my 2.0 version is not working? or if maybe there is a better way to do a sprite hole with cocos2d/opengl 2.0? shaders? thanks

  Read the article

• How can I optimise ext4 for reliability?

  - by amin

  As ext4 was introduced as more reliable than ext3 with block journals, is there any chance to suppose it 100% reliable? What if enabling block journaling on it, which is disabled by default? As friend's guide to explain my case in more detail: I have an embedded linux device, after installation keyboard and monitor is detached and it works standalone. My duty is to make sure it has reliable file-system so with errors there is no way for manual correct faults on device. I can't force my customer to use a ups with each device to ensure no fault by power-failure. What more can ext4 offer me besides block journaling? Thanks in advance.

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >