Search Results

Search found 4084 results on 164 pages for 'contact'.

Page 155/164 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• RegEx to ignore / skip everything in html tags

  - by Scott Sumpter

  Looking for a way to combine two Regular Expressions. One to catch the urls and the other to ensure is skips text within html tags. See sample text below functions. Need to pass a block of news text and format text by wrapping urls and email addresses in html tags so users don't have to. The below code works great until there are already html tags within the text. In that case it doubles the html tags. There are plenty of examples to strip html, but I want to just ignore it since the url is already linkified. Also - if there is an easier was to accomplish this, with or without Regex, please let me know. none of my attempts to combine Regexs have worked. coding in ASP.NET VB but will take any workable example/direction. Thanks! ===== Functions ============= Public Shared Function InsertHyperlinks(ByVal inText As String) As String Dim strBuf As String Dim objMatches As Object Dim iStart, iEnd As Integer strBuf = "" iStart = 1 iEnd = 1 Dim strRegUrlEmail As String = "\b(www|http|\S+@)\S+\b" 'RegEx to find urls and email addresses Dim objRegExp As New Regex(strRegUrlEmail, RegexOptions.IgnoreCase) 'Match URLs and emails Dim MatchList As MatchCollection = objRegExp.Matches(inText) If MatchList.Count <> 0 Then objMatches = objRegExp.Matches(inText) For Each Match In MatchList iEnd = Match.Index strBuf = strBuf & Mid(inText, iStart, iEnd - iStart + 1) If InStr(1, Match.Value, "@") Then strBuf = strBuf & HrefGet(Match.Value, "EMAIL", "_BLANK") Else strBuf = strBuf & HrefGet(Match.Value, "WEB", "_BLANK") End If iStart = iEnd + Match.Length + 1 Next strBuf = strBuf & Mid(inText, iStart) InsertHyperlinks = strBuf Else 'No hyperlinks to replace InsertHyperlinks = inText End If End Function Shared Function HrefGet(ByVal url As String, ByVal urlType As String, ByVal Target As String) As String Dim strBuf As String strBuf = "<a href=""" If UCase(urlType) = "WEB" Then If LCase(Left(url, 3)) = "www" Then strBuf = "<a href=""http://" & url & """ Target=""" & _ Target & """>" & url & "</a>" Else strBuf = "<a href=""" & url & """ Target=""" & _ Target & """>" & url & "</a>" End If ElseIf UCase(urlType) = "EMAIL" Then strBuf = "<a href=""mailto:" & url & """ Target=""" & _ Target & """>" & url & "</a>" End If HrefGet = strBuf End Function ===== Sample Text ============= This would be the inText parameter. Midway through the ride, we see a Skip this too. But sometimes we go here [insert normal www dot link dot com]. If you'd like to join us contact Bill Smith at [email protected]. Thanks! sorry stack overflow won't allow multiple hyperlinks to be added. ===== End Sample Text =============

  Read the article

• How to install MariaDB rpms in CentOS 6.4 using rpm (not yum cmd) + handling mysql-libs conflicts

  - by Pat C

  I need to script the install of MariaDB using the rpm command in CentOS 6.4. I can't use yum since it's going to be an offline install so there's no access to the repository. The only MySQL package installed is mysql-libs as various other packages in CentOS depend on it. When I did a test install of MariaDB with yum it correctly accounted for mysql-libs and uninstalled it at the end as MariaDB could handle the dependencies after it was installed: [root@new-host-6 ~]# yum install MariaDB-client MariaDB-common MariaDB-compat MariaDB-devel MariaDB-server MariaDB-shared Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security, verify Loading mirror speeds from cached hostfile * base: mirrors.kernel.org * extras: mirror.keystealth.org * updates: mirror.umd.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package MariaDB-client.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-common.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-compat.x86_64 0:5.5.32-1 will be obsoleting ---> Package MariaDB-devel.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-server.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-shared.x86_64 0:5.5.32-1 will be obsoleting ---> Package mysql-libs.x86_64 0:5.1.66-2.el6_3 will be obsoleted --> Finished Dependency Resolution Dependencies Resolved ==================================================================================================================================================================== Package Arch Version Repository Size ==================================================================================================================================================================== Installing: MariaDB-client x86_64 5.5.32-1 mariadb 10 M MariaDB-common x86_64 5.5.32-1 mariadb 23 k MariaDB-compat x86_64 5.5.32-1 mariadb 2.7 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 MariaDB-devel x86_64 5.5.32-1 mariadb 5.6 M MariaDB-server x86_64 5.5.32-1 mariadb 34 M MariaDB-shared x86_64 5.5.32-1 mariadb 1.1 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 Transaction Summary ==================================================================================================================================================================== Install 6 Package(s) Total download size: 53 M Is this ok [y/N]: y Downloading Packages: (1/6): MariaDB-5.5.32-centos6-x86_64-client.rpm | 10 MB 00:06 (2/6): MariaDB-5.5.32-centos6-x86_64-common.rpm | 23 kB 00:00 (3/6): MariaDB-5.5.32-centos6-x86_64-compat.rpm | 2.7 MB 00:02 (4/6): MariaDB-5.5.32-centos6-x86_64-devel.rpm | 5.6 MB 00:06 (5/6): MariaDB-5.5.32-centos6-x86_64-server.rpm | 34 MB 00:23 (6/6): MariaDB-5.5.32-centos6-x86_64-shared.rpm | 1.1 MB 00:00 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Total 1.3 MB/s | 53 MB 00:40 warning: rpmts_HdrFromFdno: Header V4 DSA/SHA1 Signature, key ID 1bb943db: NOKEY Retrieving key from https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Importing GPG key 0x1BB943DB: Userid: "Daniel Bartholomew (Monty Program signing key) <[email protected]>" From : https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Warning: RPMDB altered outside of yum. Installing : MariaDB-compat-5.5.32-1.x86_64 1/7 Installing : MariaDB-common-5.5.32-1.x86_64 2/7 Installing : MariaDB-server-5.5.32-1.x86_64 3/7 chown: cannot access `/var/lib/mysql': No such file or directory PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER ! To do so, start the server, then issue the following commands: '/usr/bin/mysqladmin' -u root password 'new-password' '/usr/bin/mysqladmin' -u root -h new-host-6 password 'new-password' Alternatively you can run: '/usr/bin/mysql_secure_installation' which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the MariaDB Knowledgebase at http://kb.askmonty.org or the MySQL manual for more instructions. Please report any problems with the '/usr/bin/mysqlbug' script! The latest information about MariaDB is available at http://mariadb.org/. You can find additional information about the MySQL part at: http://dev.mysql.com Support MariaDB development by buying support/new features from Monty Program Ab. You can contact us about this at [email protected]. Alternatively consider joining our community based development effort: http://kb.askmonty.org/en/contributing-to-the-mariadb-project/ Installing : MariaDB-devel-5.5.32-1.x86_64 4/7 Installing : MariaDB-client-5.5.32-1.x86_64 5/7 Installing : MariaDB-shared-5.5.32-1.x86_64 6/7 Erasing : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Verifying : MariaDB-common-5.5.32-1.x86_64 1/7 Verifying : MariaDB-server-5.5.32-1.x86_64 2/7 Verifying : MariaDB-devel-5.5.32-1.x86_64 3/7 Verifying : MariaDB-client-5.5.32-1.x86_64 4/7 Verifying : MariaDB-compat-5.5.32-1.x86_64 5/7 Verifying : MariaDB-shared-5.5.32-1.x86_64 6/7 Verifying : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Installed: MariaDB-client.x86_64 0:5.5.32-1 MariaDB-common.x86_64 0:5.5.32-1 MariaDB-compat.x86_64 0:5.5.32-1 MariaDB-devel.x86_64 0:5.5.32-1 MariaDB-server.x86_64 0:5.5.32-1 MariaDB-shared.x86_64 0:5.5.32-1 Replaced: mysql-libs.x86_64 0:5.1.66-2.el6_3 Complete! My question is, what is the equivalent way to install the MariaDB packages using the rpm command only as opposed to yum? If I do rpm -ivh MariaDB*.rpm, I will get a ton of messages like the following about conflicts with mysql-libs: file /etc/my.cnf from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 file /usr/share/mysql/charsets/Index.xml from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 I then used the --force option to install the MariaDB rpms and uninstalled mysql-lib, I didn't get any weird messages but I'm not sure that is the cleanest method to handle the conflicts and do the install. So can someone confirm that installing MariaDB with the following rpm commands would be the same as using yum to install the packages and handle mysql-libs conflicts/removal: rpm -ivh --force MariaDB*.rpm rpm -e mysql-libs Thanks for any input!

  Read the article

• How to drill down with jQuery?

  - by Timothy Reed

  I'm new to jQuery so sorry if this sounds stupid but I'm having truble drilling down to other elemnts. Paticularly I want to fade in the .menu li a:hover class with jquery. .menu { padding:0; margin:0; list-style:none; } .menu li { float:left; margin-left:1px; } .menu li a { display:block; height:44px; line-height:40px; padding:0 5px; float:right; color:#fff; text-decoration:none; font-family:"Palatino Linotype", "Book Antiqua", Palatino, serif; font-size:12px; font-weight:bold; } .menu li a b { text-transform:uppercase; } .menu li a:hover { color:#E4FFC5; background: url(../images/arrow.png) no-repeat center bottom; } .current { background: url(../images/arrow.png) no-repeat center bottom; font-size:16px; font-weight:bold; } .spacer p { display:block; height:44px; line-height:40px; padding:0 5px; float:right; color:#fff; text-decoration:none; font-family:"Palatino Linotype", "Book Antiqua", Palatino, serif; font-size:12px; font-weight:bold; } <ul class="menu"> <li class="current"><a href="index.html">Home</a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Mission &amp; Values </a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Caregivers</a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Special Programs </a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Enployment</a></li> <li class="spacer"> <p>|</p> </li> <li><a href="#">Contact</a></li> </ul> <script type="text/javascript"> $(function() { $('a').mouseover(function() { $('.logo').animate ({opacity:'0.6'}, 'normal'); }); $('a').mouseout (function() { $('.logo').animate ({opacity:'1'}, 'normal'); $('.menu li a:hover').fadeIn ('slow'); }); </script>

  Read the article

• Website Link Injection

  - by Ryan B

  I have a website that is fairly static. It has some forms on it to send in contact information, mailing list submissions, etc. Perhaps hours/days after an upload to the site I found that the main index page had new code in it that I had not placed there that contained a hidden bunch of links in a invisible div. I have the following code the handles the variables sent in from the form. <?php // PHP Mail Order to [email protected] w/ some error detection. $jamemail = "[email protected]"; function check_input($data, $problem='') { $data = trim($data); $data = stripslashes($data); $data = htmlspecialchars($data); if ($problem && strlen($data) == 0) { die($problem); } return $data; } $email = check_input($_POST['email'], "Please input email address."); $name = check_input($_POST['name'], "Please input name."); mail($jamemail, "Mailing List Submission", "Name: " . $name . " Email: " .$email); header('Location: index.php'); ?> I have the following code within the index page to present the form with some Javascript to do error detection on the content of the submission prior to submission. <form action="sendlist.php" method="post" onSubmit="return checkmaill(this);"> <label for="name"><strong>Name: </strong></label> <input type="text" name="name"/><br /> <label for="email"><strong>Email: </strong></label> <input type="text" name="email"/><br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<input type="submit" value="Subscribe" style="width: 100px;"/> </form> At the end of the day, the source code where the injected hyperlinks is as follows: </body> </html><!-- google --><font style="position: absolute;overflow: hidden;height: 0;width: 0"> xeex172901 <a href=http://menorca.caeb.com/od9c2/xjdmy/onondaga.php>onondaga</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/tami.php>tami</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/shotguns.php>shotguns</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/weir.php>weir</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/copperhead.php>copperhead</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/mpv.php>mpv</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/brunei.php>brunei</a> <a href=http://menorca.caeb.com/od9c2/xjdmy/doreen.php>doreen</a>

  Read the article

• fonts mac vs pc

  - by Kieran

  Hi all hope your having a good day/evening. Simple question, but maybe not so simple to answer. I have an unordered list, which i am using as a menu. The list items are floated right and sized due to an anchor tag inside them with a roll over. The last element is given a specific size to suck up any extra space. See the code snippits bellow. css ul.mainNav { width: 970px; display:block; background:black; clear:both; overflow:hidden;} ul.mainNav li { float: left; height:29px;} ul.mainNav li a { display: block; padding:7px 19px; color:#ffffff; background-color:#000; font-weight:bold; text-decoration:none; font-size:13px; } ul.mainNav li a:hover, ul.mainNav li a.selected { background-color:#ffff00; color:#000; } ul.mainNav li a.last{ text-align:center; padding: 7px 19px; width:58px;} html <ul class="mainNav" id="mainNav"> <li><a href="/Default.aspx">home</a></li> <li><a href="/About/">about</a></li> <li><a href="/News/">news</a></li> <li><a href="/Enter/Registration.aspx">enter SOYA 2010</a></li> <li><a href="/Categories/Film.aspx">categories</a></li> <li><a href="/Mentors/janChapman.aspx">mentors</a></li> <li><a href="/PastWinners/">past winners</a></li> <li><a href="/Awards/">awards nights</a></li> <li><a href="/Support/" class="last">contact</a></li> </ul> It is containted in a <div style="margin:0 auto;">...</div> to center on the menu on screen Now my problem is: On PC; firefox/ Safari /IE /Chrome are all displaying correctly. Take the same code to a Mac; Safari/ firefox are displaying the menu to be too short and the only thing i can point to is that the fonts may be smaller in widths. The width is currently set to 970px. My question is: How can i get it to display at the same widths without specifying exact widths for each list item? Any help would be appreciated. If my structure is wrong or it is just a mac thing that i will never solve(hope not). Cheers, KJ

  Read the article

• GWT with JDO problem

  - by Maksim

  I just start playing with GWT I'm having a really hard time to make GWT + JAVA + JDO + Google AppEngine working with DataStore. I was trying to follow different tutorial but had no luck. For example I wend to these tutorials: TUT1 TUT2 I was not able to figure out how and what i need to do in order to make this work. Please look at my simple code and tell me what do i need to do so i can persist it to the datastore: 1. ADDRESS ENTITY package com.example.rpccalls.client; import java.io.Serializable; import javax.jdo.annotations.IdGeneratorStrategy; import javax.jdo.annotations.Persistent; import javax.jdo.annotations.PrimaryKey; public class Address implements Serializable{ @PrimaryKey @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY) private int addressID; @Persistent private String address1; @Persistent private String address2; @Persistent private String city; @Persistent private String state; @Persistent private String zip; public Address(){} public Address(String a1, String a2, String city, String state, String zip){ this.address1 = a1; this.address2 = a2; this.city = city; this.state = state; this.zip = zip; } /* Setters and Getters */ } 2. PERSON ENTITY package com.example.rpccalls.client; import java.io.Serializable; import java.util.ArrayList; import javax.jdo.annotations.IdGeneratorStrategy; import javax.jdo.annotations.PersistenceCapable; import javax.jdo.annotations.Persistent; import javax.jdo.annotations.PrimaryKey; import com.google.appengine.api.datastore.Key; @PersistenceCapable public class Person implements Serializable{ @PrimaryKey @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY) private Key key; @Persistent private String name; @Persistent private int age; @Persistent private char gender; @Persistent ArrayList<Address> addresses; public Person(){} public Person(String name, int age, char gender){ this.name = name; this.age = age; this.gender = gender; } /* Getters and Setters */ } 3. RPCCalls package com.example.rpccalls.client; import java.util.ArrayList; import com.google.gwt.core.client.EntryPoint; import com.google.gwt.core.client.GWT; import com.google.gwt.event.dom.client.ClickEvent; import com.google.gwt.event.dom.client.ClickHandler; import com.google.gwt.user.client.Window; import com.google.gwt.user.client.rpc.AsyncCallback; import com.google.gwt.user.client.ui.Button; import com.google.gwt.user.client.ui.RootPanel; import com.google.gwt.user.client.ui.TextBox; public class RPCCalls implements EntryPoint { private static final String SERVER_ERROR = "An error occurred while attempting to contact the server. Please check your network connection and try again."; private final RPCCallsServiceAsync rpccallService = GWT.create(RPCCallsService.class); TextBox nameTxt = new TextBox(); Button btnSave = getBtnSave(); public void onModuleLoad() { RootPanel.get("inputName").add(nameTxt); RootPanel.get("btnSave").add(btnSave); } private Button getBtnSave(){ Button btnSave = new Button("SAVE"); btnSave.addClickHandler( new ClickHandler(){ public void onClick(ClickEvent event){ saveData2DB(nameTxt.getText()); } } ); return btnSave; } void saveData2DB(String name){ AsyncCallback<String> callback = new AsyncCallback<String>() { public void onFailure(Throwable caught) { Window.alert("WOOOHOOO, ERROR: " + SERVER_ERROR);

  Read the article

• Server being used to send spam mail. How do I investigate?

  - by split_account

  Problem I think my server is being used to send spam with sendmail, I'm getting a lot of mail being queued up that I don't recognize and my mail.log and syslog are getting huge. I've shutdown sendmail, so none of it is getting out but I can't work out where it's coming from. Investigation so far: I've tried the solution in the blog post below and also shown in this thread. It's meant to add a header from wherever the mail is being added and log all all mail to file, so I changed the following lines in my php.ini file: mail.add_x_header = On mail.log = /var/log/phpmail.log But nothing is appearing in the phpmail.log. I used the command here to investigate cron jobs for all users, but nothing is out of place. The only cron being run is the cron for the website. And then I brought up all php files which had been modified in the last 30 days but none of them look suspicious. What else can I do to find where this is coming from? Mail.log reports Turned sendmail back on for second. Here is a small sample of the reports: Jun 10 14:40:30 ubuntu12 sm-mta[13684]: s5ADeQdp013684: from=<>, size=2431, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jun 10 14:40:30 ubuntu12 sm-msp-queue[13674]: s5ACK1cC011438: to=www-data, delay=01:20:14, xdelay=00:00:00, mailer=relay, pri=571670, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s5ADeQdp013684 Message accepted for delivery) Jun 10 14:40:30 ubuntu12 sm-mta[13719]: s5ADeQdp013684: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=32683, dsn=2.0.0, stat=Sent Jun 10 14:40:30 ubuntu12 sm-mta[13684]: s5ADeQdr013684: from=<[email protected]>, size=677, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jun 10 14:40:31 ubuntu12 sm-msp-queue[13674]: s5AC0gpi011125: to=www-data, ctladdr=www-data (33/33), delay=01:39:49, xdelay=00:00:01, mailer=relay, pri=660349, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s5ADeQdr013684 Message accepted for delivery) Jun 10 14:40:31 ubuntu12 sm-mta[13721]: s5ADeQdr013684: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:00:01, xdelay=00:00:00, mailer=local, pri=30946, dsn=2.0.0, stat=Sent Jun 10 14:40:31 ubuntu12 sm-mta[13684]: s5ADeQdt013684: from=<[email protected]>, size=677, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jun 10 14:40:31 ubuntu12 sm-msp-queue[13674]: s5ACF2Nq011240: to=www-data, ctladdr=www-data (33/33), delay=01:25:29, xdelay=00:00:00, mailer=relay, pri=660349, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s5ADeQdt013684 Message accepted for delivery) Jun 10 14:40:31 ubuntu12 sm-mta[13723]: s5ADeQdt013684: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30946, dsn=2.0.0, stat=Sent Ju Further Investigation Spotted 4 spam accounts registered in the past day, which is suspicious however all have normal user privileges. There are no contact forms on the site, there are a number of forms and they take either filtered text input or plain text input. Mail is still being queued up having switched the website to maintenance mode, which blocks out everyone but the admin. Ok more investigation, it looks like the email is being send by my websites cron which runs every 5 minutes. However there are no cron jobs I've set-up which run more than once an hour and show on the website log so presumably someone has managed to edit my cron somehow. Copy of email: V8 T1402410301 K1402411201 N2 P120349 I253/1/369045 MDeferred: Connection refused by [127.0.0.1] Fbs $_www-data@localhost ${daemon_flags}c u Swww-data [email protected] MDeferred: Connection refused by [127.0.0.1] C:www-data rRFC822; [email protected] RPFD:www-data H?P?Return-Path: <?g> H??Received: (from www-data@localhost) by ubuntu12.pcsmarthosting.co.uk (8.14.4/8.14.4/Submit) id s5AEP13T015507 for www-data; Tue, 10 Jun 2014 15:25:01 +0100 H?D?Date: Tue, 10 Jun 2014 15:25:01 +0100 H?x?Full-Name: CronDaemon H?M?Message-Id: <[email protected]> H??From: root (Cron Daemon) H??To: www-data H??Subject: Cron <www-data@ubuntu12> /usr/bin/drush @main elysia-cron H??Content-Type: text/plain; charset=ANSI_X3.4-1968 H??X-Cron-Env: <PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin> H??X-Cron-Env: <COLUMNS=80> H??X-Cron-Env: <SHELL=/bin/sh> H??X-Cron-Env: <HOME=/var/www> H??X-Cron-Env: <LOGNAME=www-data>

  Read the article

• vertical navigation that shows hidden submenu on click using JQuery

  - by user346602

  Hi, I am trying to make a menu that works like the one on this flash site: http://elevensix.de/ When I click "portfolio", only then to the subnavigation links reveal themselves. Right now I have only managed to get a typical vertical "reveal subnavigation on hover menu" working. What is required is that once the appropriate menu item it cicked, its submenu shows. This submenu remains revealed as the submenu items are hovered over then selected. When the submenu item is selected, the content shows, and both the menu and submenu remain visible (the selected menu and submenu item are given a distinct colour to show the navigation path). Whew. Here is my html: <div id="nav"> <ul> <li><a href="#">about</a></li> <li><a href="#">testimonials</a> <ul> <li><a href="#">testimonial1</a></li> <li><a href="#">testimonial2</a></li> <li><a href="#">testimonial3</a></li> <li><a href="#">testimonial4</a></li> </ul> </li> <li><a href="#">Services</a> <ul> <li><a href="#">services1</a></li> <li><a href="#">services2</a></li> <li><a href="#">services3</a></li> <li><a href="#">services4</a></li> </ul> </li> <li><a href="#">Gallery</a></li> <li><a href="#">Contact</a></li> </ul> </div><!--end #nav--> and here is my css: #nav { width:160px; position: relative; top: 250px; left: 20px; } #nav ul { margin:0px; padding:0px; } #nav ul li { line-height:24px; list-style:none; } #nav a { text-decoration: none; color: #9d9fa2; } #nav ul li a:hover { position:relative; color: #00aeef; } #nav ul ul { display:none; position:absolute; left:160px; top:4px; } #nav ul li:hover ul { display:block; color: #00aeef; } #nav ul ul li { width:160px; float:left; display:inline; line-height:16px; } .selected { color: #00aeef !important; } Should I be giving the submenus a class so that I can hide then show them? And where would the class be applied? To the ul? could I use the same class for both submenus? Am I wrong in how I am applying the display:none values for this purpose? Many thanks to all the clever people on here.

  Read the article

• OpenVPN Server Ethernet Bridging Question

  - by Hooplad

  Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

  Read the article

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• Nginx no static files after update

  - by SomeoneS

  First, i must say that i am not expert in server administration, my site was setup by hosting admins (that i cannot contact anymore). Few days ago, i updated Nginx to latest version (admin told me that it is safe to do). But after that, my site serves only html content, no CSS, images, JS. If i try to open some image i get message "Wellcome to Nginx" (same thin if i try to open static.mysitedomain.com). More details: Site has static. subdomain, but static files are in same directory as they used to be before setting up static files. I was googling for some solutions, i tried to change something in /etc/nginx/, but no luck. I feel that this is some minor configuration problem, any ideas? EDIT: Here is /etc/nginx/nginx.conf file content: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Here is /etc/nginx/sites-enabled/default file content: server { #listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; deny all; } # Only for nginx-naxsi : process denied requests #location /RequestDenied { # For example, return an error code #return 418; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # root html; # index index.html index.htm; # # location / { # try_files $uri $uri/ /index.html; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # # root html; # index index.html index.htm; # # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # # ssl_session_timeout 5m; # # ssl_protocols SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; # ssl_prefer_server_ciphers on; # # location / { # try_files $uri $uri/ /index.html; # } #}

  Read the article

• Cisco PIX 515 doesn't seem to be passing traffic through according to static route

  - by Liquidkristal

  Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

  Read the article

• Windows 7 cannot join samba domain

  - by Antonis Christofides

  I have a 3.5.6 samba server with a LDAP backend (both on Debian 6.0). I've been successfully adding Windows XP machines to the domain for years. I now try to add Windows 7. I have made the recommended registry changes, but I don't have any success so far. Here is what happens: 1. I go to computer name, select "Domain" instead of "Workgroup", type in the domain name, click OK. It asks me for the username and password of an account that can add computers to the domain; I enter them. After about 40 seconds, I get the following message: The following error occurred attempting to join the domain "ITIA": The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain. Despite this, the samba server successfully creates the computer account. 2. Therefore, if I try again a second time, without deleting the already created computer account, I get a different error: The following error occurred attempting to join the domain "ITIA": The specified account already exists. (Note that until a while ago samba wasn't configured to automatically create computer accounts. What I did whenever I wanted an XP to join was to manually create it. When I first attempted to solve the Windows 7 join problem, I setup samba to do this automatically, as this is what most people do, as I understand, and I thought that it might be related. I haven't attempted to add an XP since I made this change, so I don't know if it works, but whether it works or not, the problem remains.) Update 1: Here are the relevant parts of smb.conf: [global] panic action = /usr/share/samba/panic-action %d workgroup = ITIA server string = Itia file server announce as = NT interfaces = 147.102.160.1 volume = %h passdb backend = ldapsam:ldap://ldap.itia.ntua.gr:389 ldap admin dn = uid=samba,ou=daemons,dc=itia,dc=ntua,dc=gr ldap ssl = off ldap suffix = dc=itia,dc=ntua,dc=gr ldap user suffix = ou=people ldap group suffix = ou=groups ldap machine suffix = ou=computers unix password sync = no add machine script = smbldap-useradd -w -i %u log file = /var/log/samba/samba-log.all log level = 3 max log size = 5000 syslog = 2 socket options = SO_KEEPALIVE TCP_NODELAY encrypt passwords = true password level = 1 security = user domain master = yes local master = no wins support = yes domain logons = yes idmap gid = 1000-2000 Update 2: The server has a single network interface eth1 (also an unused eth0 that shows up only in the kernel boot messages) and two ip addresses; the main, 147.102.160.1, and an additional one, 147.102.160.37, that comes up with "ip addr add 147.102.160.37/32 dev eth1" (used only for a web site that has a different certificate than other web sites served from the same machine). One of the problems I recently faced was that samba was using the latter IP address. I fixed that by adding the "interfaces = 147.102.160.1" statement in smb.conf. Now: acheloos:/etc/apache2# tcpdump host 147.102.160.40 and not port 5900 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:13:56.549048 IP lithaios.itia.civil.ntua.gr.netbios-dgm > 147.102.160.255.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549056 ARP, Request who-has acheloos2.itia.civil.ntua.gr tell lithaios.itia.civil.ntua.gr, length 46 13:13:56.549091 ARP, Reply acheloos2.itia.civil.ntua.gr is-at 00:10:4b:b4:9e:59 (oui Unknown), length 28 13:13:56.549324 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549608 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos2.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549741 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550364 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550468 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) (acheloos2 is the second IP address, 147.102.160.37). The above dump occurs when I click "OK" (to join the domain), until it asks me for the username and password of a user that can join the domain. I don't know why the client is contacting the second IP address. I tried temporarily deactivating it, but I still had some related ARP traffic (though I think not IP traffic).

  Read the article

• Dynamic 'twitter style' urls with ASP.NET

  - by Desiny

  I am looking to produce an MVC site which has complete control of the url structure using routing. The specific requirements are: www.mysite.com/ = homepage (home controller) www.mysite.com/common/about = content page (common controller) www.mysite.com/common/contact = content page (common controller) www.mysite.com/john = twitter style user page (dynamic controller) www.mysite.com/sarah = twitter style user page (dynamic controller) www.mysite.com/me = premium style user page (premium controller) www.mysite.com/oldpage.html = 301 redirect to new page www.mysite.com/oldpage.asp?id=3333 = 301 redirect to new page My routes look as follows: routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Common", "common/{action}/{id}", new { controller = "common", action = "Index", id = "" } ); routes.MapRoute( "Home", "", new { controller = "Home", action = "Index", id = "" } ); routes.MapRoute( "Dynamic", "{id}", new { controller = "dynamic", action = "Index", id = "" } ); In order to handle the 301 rredirct, I have a database defining the old pages and their new page urls and a stored procdure to handle the lookup. The code (handler) looks like this: public class AspxCatchHandler : IHttpHandler, IRequiresSessionState { #region IHttpHandler Members public bool IsReusable { get { return true; } } public void ProcessRequest(HttpContext context) { if (context.Request.Url.AbsolutePath.Contains("aspx") && !context.Request.Url.AbsolutePath.ToLower().Contains("default.aspx")) { string strurl = context.Request.Url.PathAndQuery.ToString(); string chrAction = ""; string chrDest = ""; try { DataTable dtRedirect = SqlFactory.Execute( ConfigurationManager.ConnectionStrings["emptum"].ConnectionString, "spGetRedirectAction", new SqlParameter[] { new SqlParameter("@chrURL", strurl) }, true); chrAction = dtRedirect.Rows[0]["chrAction"].ToString(); chrDest = dtRedirect.Rows[0]["chrDest"].ToString(); chrDest = context.Request.Url.Host.ToString() + "/" + chrDest; chrDest = "http://" + chrDest; if (string.IsNullOrEmpty(strurl)) context.Response.Redirect("~/"); } catch { chrDest = "/";// context.Request.Url.Host.ToString(); } context.Response.Clear(); context.Response.Status = "301 Moved Permanently"; context.Response.AddHeader("Location", chrDest); context.Response.End(); } else { string originalPath = context.Request.Path; HttpContext.Current.RewritePath("/", false); IHttpHandler httpHandler = new MvcHttpHandler(); httpHandler.ProcessRequest(HttpContext.Current); HttpContext.Current.RewritePath(originalPath, false); } } #endregion } It is very simple to look up a user and in fact the above code does this. My problem is in the dynamic / premium part. I am trying to do the following: 1) in the dynamic controller, lookup the username. 2) if the username is in the user list (database), show the Index ActionResult of the Dynamic controller. 3) if the username is not found, look up the username in the premium list 4) if the username is fund in the premium list (database) then show the Index ActionResult of the Preium controller. 5) If all else fails jump to the 404 page (which will ask the user to sign up) Is this possible? Looking up the user twice is a bad idea for performance? How do I do this without redirecting?

  Read the article

• How to design a high-level application protocol for metadata syncing between devices and server?

  - by Jaanus

  I am looking for guidance on how to best think about designing a high-level application protocol to sync metadata between end-user devices and a server. My goal: the user can interact with the application data on any device, or on the web. The purpose of this protocol is to communicate changes made on one endpoint to other endpoints through the server, and ensure all devices maintain a consistent picture of the application data. If user makes changes on one device or on the web, the protocol will push data to the central repository, from where other devices can pull it. Some other design thoughts: I call it "metadata syncing" because the payloads will be quite small, in the form of object IDs and small metadata about those ID-s. When client endpoints retrieve new metadata over this protocol, they will fetch actual object data from an external source based on this metadata. Fetching the "real" object data is out of scope, I'm only talking about metadata syncing here. Using HTTP for transport and JSON for payload container. The question is basically about how to best design the JSON payload schema. I want this to be easy to implement and maintain on the web and across desktop and mobile devices. The best approach feels to be simple timer- or event-based HTTP request/response without any persistent channels. Also, you should not have a PhD to read it, and I want my spec to fit on 2 pages, not 200. Authentication and security are out of scope for this question: assume that the requests are secure and authenticated. The goal is eventual consistency of data on devices, it is not entirely realtime. For example, user can make changes on one device while being offline. When going online again, user would perform "sync" operation to push local changes and retrieve remote changes. Having said that, the protocol should support both of these modes of operation: Starting from scratch on a device, should be able to pull the whole metadata picture "sync as you go". When looking at the data on two devices side by side and making changes, should be easy to push those changes as short individual messages which the other device can receive near-realtime (subject to when it decides to contact server for sync). As a concrete example, you can think of Dropbox (it is not what I'm working on, but it helps to understand the model): on a range of devices, the user can manage a files and folders—move them around, create new ones, remove old ones etc. And in my context the "metadata" would be the file and folder structure, but not the actual file contents. And metadata fields would be something like file/folder name and time of modification (all devices should see the same time of modification). Another example is IMAP. I have not read the protocol, but my goals (minus actual message bodies) are the same. Feels like there are two grand approaches how this is done: transactional messages. Each change in the system is expressed as delta and endpoints communicate with those deltas. Example: DVCS changesets. REST: communicating the object graph as a whole or in part, without worrying so much about the individual atomic changes. What I would like in the answers: Is there anything important I left out above? Constraints, goals? What is some good background reading on this? (I realize this is what many computer science courses talk about at great length and detail... I am hoping to short-circuit it by looking at some crash course or nuggets.) What are some good examples of such protocols that I could model after, or even use out of box? (I mention Dropbox and IMAP above... I should probably read the IMAP RFC.)

  Read the article

• HTML E-Mail as fileattachment

  - by johnny

  I have a Problem with Outlook 2010. I sent an E-Mail with a Contactform with this Code: $message = ' <html> <head> <title>Anfrage ('.$cfg->get('global.page.title').')</title> <style type="text/css"> body { background:#FFFFFF; color:#000000; } #tbl td { background:#F0F0F0; vertical-align:top; } #tbl2 td { background:#E0E0E0; vertical-align:top; } </style> </head> <body> <p>Mail von der Webseite '.$cfg->get('global.page.title').'</p> <table id="tbl"> <tr> <td>Absender</td> <td>'.htmlspecialchars($_POST['name']).' ('.htmlspecialchars(trim($_POST['email'])).')</td> </tr> <tr id="tbl2"> <td>Betreff:</td> <td>'.htmlspecialchars($_POST["topic"]).'</td> </tr> <tr> <td>Nachricht:</td> <td>'.nl2br(htmlspecialchars($_POST["message"])).'</td> </tr> </table> </body> </html>'; $absender = $_POST['name'].' <'.$_POST['email'].'>'; $header = "From: $absender\n"; $header .= "Reply-To: $absender\n"; $header .= "X-Mailer: PHP/" . phpversion(). "\n"; $header .= "X-Sender-IP: " . $_SERVER["REMOTE_ADDR"] . "\n"; $header .= "Content-Type: text/html; Charset=utf-8"; $send_mail = mail($cfg->get('contact.toMailAdress'), "Anfrage (".$cfg->get('global.page.title').")", $message, $header); //$send_mail = mail("[email protected]", "Anfrage (".$cfg->get('global.page.title').")", $message, $header); $_SESSION['kontakt_form_time'] = time(); $tpl->assign("mail_sent", $send_mail); When I sent the email, doesn't shows the message. it generates a File named [NAME].h. The Message is in this File. How can I fix that, that the message shows in the E-Mail. Is this a Problem about the settings in Outlook?

  Read the article

• SPF record doesn't work (not sure which DNS server to tweak)

  - by Ion

  Problem: Google (and perhaps others) marks our emails as SPF neutral. Let me give you some background about the setup: initially got a dedicated server (Hetzner) with Plesk installed to host a domain/web application, let's say: bigjaws.com. Plesk automatically creates a DNS zone for it with some records for the various services it provides out of the box, e.g. webmail.bigjaws.com as a CNAME to bigjaws.com to provide Horde/whatever, etc. Let me point out four relevant of these records (where XXX.XXX.XXX.158 is our dedicated IP): bigjaws.com. A XXX.XXX.XXX.158 mail.bigjaws.com. A XXX.XXX.XXX.158 bigjaws.com MX (10) mail.bigjaws.com. bigjaws.com. TXT v=spf1 +a +mx -all The above records are not(?) valid anymore though, because after using this dedicated server for a while, our site got bigger and bigger so we decided to move our operations over to AWS (EC2, RDS, ELB, etc), but we retained the mail functionality as is, i.e. emails from [email protected] are sent by connecting to our dedicated server where Plesk takes care of things. This was decided in order not to setup anything from scratch. Of course for all DNS-related things we now use Route53. In Route53 I have the following records: mail.schoox.com. A XXX.XXX.XXX.158 bigjaws.com. MX (10) mail.bigjaws.com bigjaws.com. SPF "v=spf1 +ip4:XXX.XXX.XXX.158 +mx ~all" From my understanding of SPF, the SPF status should have been passed: I designate that all email being sent by bigjaws.com from XXX.XXX.XXX.158 are valid/not spam (I added +mx there but I'm not sure if needed). When a mail server receives an email, doesn't it lookup the SPF record of the domain and checks against the IP it got the email from? Checking with spfquery: root@box:~# spfquery -ip XXX.XXX.XXX.158 -sender [email protected] -rcpt-to [email protected] StartError Context: Failed to query MAIL-FROM ErrorCode: (2) Could not find a valid SPF record Error: No DNS data for 'bigjaws.com'. EndError noneneutral Please see http://www.openspf.org/Why?id=employee1%40bigjaws.com&ip=XXX.XXX.XXX.158&receiver=spfquery : Reason: default spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com Received-SPF: neutral (spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com) client-ip=XXX.XXX.XXX.158; [email protected]; If I go to the address listed above (openspf.org) it tells me that the message should have been accepted(!): spfquery rejected a message that claimed an envelope sender address of [email protected]. spfquery received a message from static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) that claimed an envelope sender address of [email protected]. The domain bigjaws.com has authorized static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) to send mail on its behalf, so the message should have been accepted. It is impossible for us to say why it was rejected. What should I do? If the problem persists, contact the bigjaws.com postmaster. Also, here are some headers from an email sent by one of our [email protected] addresses to a gmail.com address (by the way, bigjaws.de listed in the "Received: from" field was the initial domain hosted on the dedicated server before adding the .com one -- both are still listed as separate subscriptions under Plesk). Delivered-To: [email protected] Received: by 10.14.177.70 with SMTP id c46csp289656eem; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) X-Received: by 10.14.102.66 with SMTP id c42mr306186eeg.47.1382515860386; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) Return-Path: <[email protected]> Received: from bigjaws.de (static.158.XXX.XXX.XXX.clients.your-server.de. [XXX.XXX.XXX.158]) by mx.google.com with ESMTPS id l4si19438578eew.161.2013.10.23.01.10.59 for <[email protected]> (version=TLSv1 cipher=RC4-SHA bits=128/128); Wed, 23 Oct 2013 01:10:59 -0700 (PDT) Received-SPF: neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=XXX.XXX.XXX.158; Authentication-Results: mx.google.com; spf=neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=bigjaws.com; b=WwRAS0WKjp9lO17iMluYPXOHzqRcOueiQT4rPdvy3WFf0QzoXiy6rLfxU/Ra53jL1vlPbwlLNa5gjoJBi7ZwKfUcvs3s02hJI7b3ozl0fEgJtTPKoCfnwl4bLPbtXNFu; h=Received:Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:Content-Type:Content-Transfer-Encoding; Received: (qmail 22722 invoked from network); 23 Oct 2013 10:10:59 +0200 Received: from hostname.static.ISP.com (HELO ?192.168.1.60?) (YYY.YYY.ISP.IP) by static.158.XXX.XXX.XXX.clients.your-server.de. with ESMTPSA (DHE-RSA-AES256-SHA encrypted, authenticated); 23 Oct 2013 10:10:59 +0200 Message-ID: <[email protected]> Date: Wed, 23 Oct 2013 11:11:00 +0300 From: BigJaws Employee <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.0.1 MIME-Version: 1.0 To: [email protected] Subject: test SPF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit test SPF Any ideas why SPF is not working correctly? Also, are there any DNS settings that are not needed anymore and create a problem?

  Read the article

• Windows XP - Repairing Corrupt System32\Config\System File

  - by SimonTewsi

  My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

  Read the article

• HTML form isn't emailing

  - by Anonmattymous

  I have this as my form <div class="contactInputs"> <p>Send us a message</p> <form class="messageForm" autocomplete="on" name="contactform" method="post" action="/freequote.php"> <input type="text" name="name" placeholder="Name*" required> <input type="text" name="companyname" placeholder="Company Name"> <input type="email" name="email" placeholder="Email*" required> <input type="tel" name="phone" placeholder="Phone"> <input class="contact-submit" type="submit"> </form> <textarea type="textarea" name="message" placeholder="Your Messages*" required></textarea> </div> And this is the PHP used to do send the Email. <?php if(isset($_POST['email'])) { $email_to = "[email protected]"; $email_subject = "Your email subject line"; function died($error) { echo "We are very sorry, but there were error(s) found with the form you submitted. "; echo "These errors appear below.<br /><br />"; echo $error."<br /><br />"; echo "Please go back and fix these errors.<br /><br />"; die(); } if(!isset($_POST['name']) || !isset($_POST['companyname']) || !isset($_POST['email']) || !isset($_POST['phone']) || !isset($_POST['comments'])) { died('We are sorry, but there appears to be a problem with the form you submitted.'); } $name = $_POST['name']; $companyname = $_POST['companyname']; $email_from = $_POST['email']; $phone = $_POST['phone']; $message = $_POST['comments']; $error_message = ""; $email_exp = '/^[A-Za-z0-9._%-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,4}$/'; if(!preg_match($email_exp,$email_from)) { $error_message .= 'The Email Address you entered does not appear to be valid.<br />'; } $string_exp = "/^[A-Za-z .'-]+$/"; if(!preg_match($string_exp,$name)) { $error_message .= 'The First Name you entered does not appear to be valid.<br />'; } if(!preg_match($string_exp,$companyname)) { $error_message .= 'The Last Name you entered does not appear to be valid.<br />'; } if(strlen($message) < 2) { $error_message .= 'The Comments you entered do not appear to be valid.<br />'; } if(strlen($error_message) > 0) { died($error_message); } $email_message = "Form details below.\n\n"; function clean_string($string) { $bad = array("content-type","bcc:","to:","cc:","href"); return str_replace($bad,"",$string); } $email_message .= "First Name: ".clean_string($name)."\n"; $email_message .= "Last Name: ".clean_string($companyname)."\n"; $email_message .= "Email: ".clean_string($email_from)."\n"; $email_message .= "phone: ".clean_string($phone)."\n"; $email_message .= "Comments: ".clean_string($message)."\n"; $headers = 'From: '.$email_from."\r\n". 'Reply-To: '.$email_from."\r\n" . 'X-Mailer: PHP/' . phpversion(); @mail($email_to, $email_subject, $email_message, $headers); ?> Thank you for contacting us. We will be in touch with you very soon. <?php } ?> But whenever i try to submit it, i get the errors We are very sorry, but there were error(s) found with the form you submitted. These errors appear below. We are sorry, but there appears to be a problem with the form you submitted. Please go back and fix these errors. Does anyone see whats wrong

  Read the article

• Displaying unnecessary HTML when showing content from MySQL database.

  - by ThatMacLad

  My homepage pulls in content from my MySQL database to create a blog. I've got it so that it only displays an extract from the posts. For some reason it displays HTML tags as well rather than formatting it using the tags (See picture below). Any help is appreciated. Homepage: <html> <head> <title>Ultan Casey | Homepage</title> <link rel="stylesheet" href="css/style.css" type="text/css" /> </head> <body> <div class="wrapper"> <div id="upperbar"> <a href="#">Home</a> <a href="#">About Me</a> <a href="#">Contact Me</a> <a href="http://www.twitter.com/UltanKC">Twitter</a> <form id="search-form" action="/search" method="get"> <input type="text" id="textarea" size="33" name="q" value=""/> <input type="submit" id="submit" value="Search"/> </form> </div> <div id="banner"> <img src="images/banner.jpg"> </div> <div class="sidebar"></div> <div class="posts"> <?php mysql_connect ('localhost', 'root', 'root') ; mysql_select_db ('tmlblog'); $sql = "SELECT * FROM php_blog ORDER BY timestamp DESC LIMIT 5"; $result = mysql_query($sql) or print ("Can't select entries from table php_blog.<br />" . $sql . "<br />" . mysql_error()); while($row = mysql_fetch_array($result)) { $date = date("l F d Y", $row['timestamp']); $title = stripslashes($row['title']); $entry = stripslashes($row['entry']); $id = $row['id']; ?> <?php echo "<p id='title'><strong><a href=\"post.php?id=". $id . "\">" . $title . "</a></strong></p>"; ?><br /> <div class="post-thumb"><img src="thumbs/<?php echo $id ?>.png"></div> <?php echo htmlspecialchars(substr($entry, 0, 1050)) ?>... <br> <hr><br /> Posted on <?php echo $date; ?> </p> </div> </div> </p <?php } ?> </div> </div> </div> </body> </html> Image:

  Read the article

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• Internet Explorer not loading stylesheet.

  - by Antarr Byrd

  I have a page that uses css. I works fine in firefox but when I open in IE there appears to be no styling. <!DOCTYPE html> <html> <head> <title>MySite</title> <%= stylesheet_link_tag :all %> <%= javascript_include_tag :defaults %> <%= csrf_meta_tag %> </head> <body> <p> <nav> <ul> <li> <a href="#">Login</a> </li> <li> <a href="#">Blog</a> </li> <li> <a href="#">Contact Us </a> </li> <li> <a href="#">Help</a> </li> <li> <a href="#">Trends</a> </li> <li> <a href="#">Your Privacy!</a> </li> <li> <a href="#">Terms of Use</a> </li> <li> <a href="#">mySite.com</a> </li> </ul> </nav> </p> <%= yield %> </body> <aside style ="float:right; font-size:x-small;background:#ffffff;"> <center> Local Areas </center> <% @states.each do |state| %> <ul> <a href= "/states"> <li> <%= state.name %> </li> </a> </ul> <% end %> </aside> <footer> </footer> </html>

  Read the article

• ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

  - by user223833

  I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

  Read the article

• Passing an address inside a WordPress post to a Google Map elsewhere on the Page

  - by ael_ecurai

  Background: My client is building their own WordPress site (using a purchased feature-rich theme), and I'm modifying a child theme as necessary to achieve customizations she wants. The theme comes with a Page template that includes a full-width Google Map across the top, which pulls its marker from a single address set within the Theme Options. It's meant to be used for one main "Contact Us" page. The client's business has several locations, and she wants each location's page to include such a map. (Example linked below.) It seems that the ideal solution would be the ability to specify an address within a shortcode in the Post, and have that set the map marker. Here's how the theme makes the map (where $mapAddress is the address from the Theme Options): <?php $mapAddress = ot_get_option( 'map_address' ); $mapHeight = ot_get_option( 'map_height' ); $mapContent = ot_get_option( 'map_content' ); ?> <section id="block-map-wrapper"> <div id="block-map" class="clearfix"> <script type="text/javascript" src="https://maps.googleapis.com/maps/api/js?sensor=true"></script> <script> jQuery(document).ready(function(){ // Map Options var mapOptions = { zoom: 15, scrollwheel: false, zoomControl: true, zoomControlOptions: { style: google.maps.ZoomControlStyle.SMALL, position: google.maps.ControlPosition.TOP_LEFT }, mapTypeControl: true, scaleControl: false, panControl: false, mapTypeId: google.maps.MapTypeId.ROADMAP }; // The Map Object var map = new google.maps.Map(document.getElementById("map"), mapOptions); var address = ""; var geocoder = new google.maps.Geocoder(); geocoder.geocode({ "address" : "<?php echo $mapAddress; ?>" }, function (results, status) { if (status == google.maps.GeocoderStatus.OK) { address = results[0].geometry.location; map.setCenter(results[0].geometry.location); var marker = new google.maps.Marker({ position: address, map: map, clickable: true, animation: google.maps.Animation.DROP }); var infowindow = new google.maps.InfoWindow({ content: "<?php echo $mapContent; ?>" }); google.maps.event.addListener(marker, "click", function() { infowindow.open(map, marker); }); } }); }); </script> <div id="map" class = "map" style = "width: 100%; height: <?php echo $mapHeight; ?>px"></div> </div><!-- #block-map --> <div class="shadow-bottom"></div> </section><!-- #block-map-wrapper --> Here's a test page using a custom Page template I've created. Right now it's using the same map code as above. I've tried creating a shortcode that takes an address attribute and sets it as $mapAddress, but that didn't work. I believe it's because the map is already loaded by the time the Loop gets parsed. How can I tell Maps to "come back" to the post to get the proper address? My specialty lies in HTML & CSS, but Javascript befuddles me fairly easily, so please be explicit when explaining implementation. Bonus: A further goal is to have the locations' parent Page also include such a map, but have multiple markers representing the multiple locations. When taking more than one location, Google Maps only accepts latitude/longitude. I don't want my client to be concerned with coordinates, so I know there's got to be something I can do with the geocoding service so she can just input a list of addresses instead (into the same, or similar, shortcode solution developed for my main question). But I am extra-clueless about how to do that.

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >