Search Results

Search found 24121 results on 965 pages for 'display driver'.

Page 155/965 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• Can't adjust backlight on an Nvidia 335m GT

  - by Vladimir

  I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grub acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song) Some new thoughts... CONFIG_BACKLIGHT_GENERIC=m could this be an issue? Made this by grep BACKLIGHT /boot/config-3.2.0-22-generic-pae Full grep output can be viewed here: http://pastebin.com/sMRd2Z4k

  Read the article

• how to display the decrypted and splited Strings in order?

  - by sebby_zml

  Hi everyone, i need some help and guidance in displaying the splitted Strings in order. let say, i have username, password, nonceInString. i had successfully encrypted and decrypted those. then i split the decrypted data. it was done, too. i want to display the decrypted data in order. something like this. userneme: sebastian password: harrypotter nonce value: sdgvay1saq3qsd5vc6dger9wqktue2tz* i tried the following code, but it didn't display like i wish to. pls help. thanks a lot in advance. String codeWord = username + ";" + password + ";" + nonceInString; String encryptedData = aesEncryptDecrypt.encrypt(codeWord); String decryptedData = aesEncryptDecrypt.decrypt(encryptedData); String[] splits = decryptedData.split(";"); String[] variables = {"username", "password", "nonce value"}; for (String data : variables){ for (String item : splits){ System.out.println( data + ": "+ item); } }

  Read the article

• Disabling a touchpad in Windows

  - by Shamaoke

  I want to permanently disable a touchpad in Windows running on my laptop, since firstly, I use a mouse, and secondly, when I work, I often touch it accidentally what causes definite inconviniences. I tried the following approaches to disable it but with no result: Turned it off through BIOS — there's no such function there; Turned it off through the touchpad configuration utility — there's no such function there; Turned it off through the device manager — the disable button is inactive; Turned it off through a hotkey (Fn + F1 in my case) — the hotkey doesn't work; Uninstalled the proprietary driver — Windows automatically downloaded the standard driver; Uninstalled the standard driver and turned off the automatic driver download function (Win + R ? "systempropertiesadvanced" ? Hardware ? Device Installation Settings) — all the same, Windows downloaded and installed the driver. How can I disable a touchpad? Windows 7; the Alps touchpad.

  Read the article

• Problems with both LightDM and GDM using DisplayLink USB monitor

  - by Austin

  When I use LightDM, it will auto-login to desktop just fine. The only problem is Compiz doesn't work, and menus don't work. I can't right-click the desktop, and I can't select program menus in the top bar (I.e clicking "File" does nothing). When I use GDM, I only get a blank blue screen and the mouse cursor. I can't Ctrl+Alt+Backspace to restart, but I can Ctrl+Alt+F1 and Ctrl+Alt+F7 to switch modes. I don't think it's auto-logging me in, but I'm not sure. It plays the login screen noise. Will update with more information when I get home! EDIT: Okay, so I did a fresh install, just to ensure I hadn't borked something playing in the console. I reconfigured my setup as I did before, with the same results. Here's what I followed. The only difference is that instead of setting "vga=normal nomodeset" I set "GRUB_GFXPAYLOAD_LINUX = text". Also I only have the DisplayLink monitor configured in my xorg.conf file. At this point I'm using the open radeon driver, although I used the proprietary ati driver before. I'm not sure if I'm having a problem with: - X configuration - Graphics driver - DisplayLink driver - Unity - LightDM - Compiz - Or something else The resolution of the monitor is 800x480, 16bit. I tried setting a larger virtual resolution of 1200x720 (because the real resolution is lower than the recommended resolution), but it causes Ubuntu to boot into low graphics mode. When I get home I'm going to install the fglrx driver and see if it enables virtual resolutions, which may further enable my window manager to function properly.

  Read the article

• Can a WPF ComboBox display alternative text when its selection is null?

  - by Garth T Kidd

  G'day! I want my WPF ComboBox to display some alternative text when its data-bound selection is null. The view model has the expected properties: public ThingoSelectionViewModel : INotifyPropertyChanged { public ThingoSelectionViewModel(IProvideThingos) { this.Thingos = IProvideThingos.GetThingos(); } public ObservableCollection<Thingo> Thingos { get; set; } public Thingo SelectedThingo { get { return this.selectedThingo; } set { // set this.selectedThingo and raise the property change notification } // ... } The view has XAML binding to the view model in the expected way: <ComboBox x:Name="ComboboxDrive" SelectedItem="{Binding Path=SelectedThingo}" IsEditable="false" HorizontalAlignment="Left" MinWidth="100" IsReadOnly="false" Style="{StaticResource ComboboxStyle}" Grid.Column="1" Grid.Row="1" Margin="5" SelectedIndex="0"> <ComboBox.ItemsSource> <CompositeCollection> <ComboBoxItem IsEnabled="False">Select a thingo</ComboBoxItem> <CollectionContainer Collection="{Binding Source={StaticResource Thingos}}" /> </CompositeCollection> </ComboBox.ItemsSource> </ComboBox> The ComboBoxItem wedged into the top is a way to get an extra item at the top. It's pure chrome: the view model stays pure and simple. There's just one problem: the users want "Select a thingo" displayed whenever the ComboBox' selection is null. The users do not want a thingo selected by default. They want to see a message telling them to select a thingo. I'd like to avoid having to pollute the viewmodel with a ThingoWrapper class with a ToString method returning "Select a thingo" if its .ActualThingo property is null, wrapping each Thingo as I populate Thingos, and figuring out some way to prevent the user from selecting the nulled Thingo. Is there a way to display "Select a thingo" within the ComboBox' boundaries using pure XAML, or pure XAML and a few lines of code in the view's code-behind class?

  Read the article

• Cant get flexigrid to work in Jquery Tools Tab

  - by John

  Im fairly new to jquery and Im using jquery tools for tabs. I am wanting in one of the tabs to show flexigrid, but when I try to do this flexigrid does not show up, its just blank. If I setup flexigrid in a stand alone page outside the tab it works just fine. Below is the code that isnt working. Again Im new so please go easy! <ul class="css-tabs"> <li><a href="#details">Account Details</a></li> <li><a href="#accounts">Sub Accounts</a></li> <li><a href="#groups">Groups</a></li> <li><a href="#support">Tickets</a></li> </ul> <div class="css-panes"> <div>Tab 1</div> <div><table id="flex1" style="display:none"></table></div> <div>Tab 3</div> <div>Tab 4</div> </div> <script> $(function() { $("ul.css-tabs").tabs("div.css-panes > div").history(); }); $('.flexme1').flexigrid(); $('.flexme2').flexigrid({height:'auto',striped:false}); $("#flex1").flexigrid ( { url: '/accounts_list.php', dataType: 'json', colModel : [ {display: 'ID', name : 'id', width : 45, sortable : true, align: 'center'}, {display: 'Username', name : 'username', width : 120, sortable : true, align: 'left'}, {display: 'Display Name', name : 'displayname', width : 150, sortable : true, align: 'left'}, {display: 'Limit', name : 'accounts', width : 50, sortable : true, align: 'center'}, {display: 'Rate', name : 'charge', width : 50, sortable : true, align: 'center'}, {display: 'Subs', name : 'subcount', width : 50, sortable : true, align: 'center'} ], searchitems : [ {display: 'ID', name : 'id'}, {display: 'Username', name : 'username', isdefault: true}, {display: 'Display Name', name : 'displayname'} ], sortname: "id", sortorder: "desc", usepager: true, singleSelect: true, title: 'Test', useRp: true, rp: 20, showTableToggleBtn: false, width: 500, height: 250 }); </script>

  Read the article

• Getting my brother MFC-J825DW working as a network scanner

  - by AntonChanning

  I've been attempting to set up my new brother multi-function device to work as a printer and scanner using the following steps. It is connected to the network as a LAN device, not directly connected to my ubuntu machine. Downloaded the lpr driver and cupswrapper driver from Brother support. (Select the deb packages, not the rpms). Followed the instructions to install the lpr driver. Followed the instructions to install the cupswrapper driver. After this point I was able to successfully perform a test print, so the printer part is working. So far I haven't had much luck getting the scanner working. This is what I've tried: Downloaded the brscan4 and scan-key-tool deb packages from brother support. Followed the instructions for installing the scanner driver for network. Followed the instructions for installing scan-key-tool. However when I tried to scan it detects no scanner. I then tried the solution offered in this answer to a question based on a similar brother printer, but no luck. I must have made a mistake somewhere along the line. Does anyone have any ideas what I can try to find out what? Or should I uninstall everything and start again from the beginning?

  Read the article

• How do I get an Epson al-c 1700 printer working?

  - by Edmond Frants

  I have a brand new epson aculaser c1700 and i'd like to have it working fine on ubuntu 12.04. so i did my homework, kind of, no printer driver comes for this printer in cups ... so i asked epson support who drove me to avasys who no longer handle support since december 2011. This the question that is still in my mind : as this printer comes with an osx driver which uses cups as printer server, how come no driver can be found for cups? I tried to get ppd and filters from osx driver and use them to install the printer on ubuntu but no answer from printer and none printed sheet i have .... i'm so disappointed i could cry ... I'd like to work with someone to get this working fine, please help me!

  Read the article

• How can I display a language according to the user's browser's language inside this code?

  - by janoChen

  How can I display a language according to the user's browser's language inside this mini-framework for my multilingual website? Basically, it has to display the default language of the user if there's no cookies. Example of index.php: (rendered output) <h2><?php echo l('tagline_h2'); ?></h2> common.php: (controller of which language to output) <?php session_start(); header('Cache-control: private'); // IE 6 FIX if(isSet($_GET['lang'])) { $lang = $_GET['lang']; // register the session and set the cookie $_SESSION['lang'] = $lang; setcookie("lang", $lang, time() + (3600 * 24 * 30)); } else if(isSet($_SESSION['lang'])) { $lang = $_SESSION['lang']; } else if(isSet($_COOKIE['lang'])) { $lang = $_COOKIE['lang']; } else { $lang = 'en'; } //use appropiate lang.xx.php file according to the value of the $lang switch ($lang) { case 'en': $lang_file = 'lang.en.php'; break; case 'es': $lang_file = 'lang.es.php'; break; case 'tw': $lang_file = 'lang.tw.php'; break; case 'cn': $lang_file = 'lang.cn.php'; break; default: $lang_file = 'lang.en.php'; } //translation helper function function l($translation) { global $lang; return $lang[$translation]; } include_once 'languages/'.$lang_file; ?> Example of /languages/lang.en.php: (where multilingual content is being stored) <?php $lang = array( 'tagline_h2' => '...',

  Read the article

• Getting mybrother MFC-J825DW working as a network scanner

  - by AntonChanning

  I've been attempting to set up my new brother multi-function device to work as a printer and scanner using the following steps. It is connected to the network as a LAN device, not directly connected to my ubuntu machine. Downloaded the lpr driver and cupswrapper driver from Brother support. (Select the deb packages, not the rpms). Followed the instructions to install the lpr driver. Followed the instructions to install the cupswrapper driver. After this point I was able to successfully perform a test print, so the printer part is working. So far I haven't had much luck getting the scanner working. This is what I've tried: Downloaded the brscan4 and scan-key-tool deb packages from brother support. Followed the instructions for installing the scanner driver for network. Followed the instructions for installing scan-key-tool. However when I tried to scan it detects no scanner. I then tried the solution offered in this answer to a question based on a similar brother printer, but no luck. I must have made a mistake somewhere along the line. Does anyone have any ideas what I can try to find out what? Or should I uninstall everything and start again from the beginning?

  Read the article

• Dummy output after upgrade from 12.04 to 12.10, even though sound card is detected

  - by user115441

  So I just recently upgraded my system from Ubuntu 12.04 to 12.10. However, when I booted into 12.10 for the first time, no sound comes out of my speakers. I checked the sound settings and the Dummy Output was the only thing showing up. I used "hwinfo --sound" to check to see if my sound card was actually installed, and it was installed. hwinfo --sound hal.1: read hal dataprocess 2687: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 11: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb._aiKlM91Nt0 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2668 "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" SubVendor: pci 0x107b "Gateway 2000" SubDevice: pci 0x4040 Revision: 0x04 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0x50240000-0x50243fff (rw,non-prefetchable) IRQ: 44 (91 events) Module Alias: "pci:v00008086d00002668sv0000107Bsd00004040bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown I'm not sure what to do here. The only time the sound will actually work is when I boot into my Windows partition and then reboot into Ubuntu. I mean I don't want to have to do that every time I want to use Ubuntu. I would really appreciate any help I can get on here.

  Read the article

• SQL Server 2008: Comparing similar records - Need to still display an ID for a record when the JOIN has no matches

  - by aleppke

  I'm writing a SQL Server 2008 report that will compare genetic test results for animals. A genetic test consists of an animalId, a gene and a result. Not all animals will have the same genes tested but I need to be able to display the results side-by-side for a given set of animals and only include the genes that are present for at least one of the selected animals. My TestResult table has the following data in it: animalId gene result 1 a CC 1 b CT 1 d TT 2 a CT 2 b CT 2 c TT 3 a CT 3 b TT 3 c CC 3 d CC 3 e TT I need to generate a result set that looks like the following. Note that Animal 3 is not being displayed (user doesn't want to see its results) and neither are results for Gene "e" since neither Animal 1 nor Animal 2 have a result for that gene: SireID SireResult CalfID CalfResult Gene 1 CC 2 CT a 1 CT 2 CT b 1 NULL 2 TT c 1 TT 2 NULL d But I can only manage to get this: SireID SireResult CalfID CalfResult Gene 1 CC 2 CT a 1 CT 2 CT b NULL NULL 2 TT c 1 TT NULL NULL d This is the query I'm using. SELECT sire.animalId AS 'SireID' ,sire.result AS 'SireResult' ,calf.animalId AS 'CalfID' ,calf.result AS 'CalfResult' ,sire.gene AS 'Gene' FROM (SELECT s.animalId ,s.result ,m1.gene FROM (SELECT [animalId ] ,result ,gene FROM TestResult WHERE animalId IN (1)) s FULL JOIN (SELECT DISTINCT gene FROM TestResult WHERE animalId IN (1, 2)) m1 ON s.marker = m1.marker) sire FULL JOIN (SELECT c.animalId ,c.result ,m2.gene FROM (SELECT animalId ,result ,gene FROM TestResult WHERE animalId IN (2)) c FULL JOIN (SELECT DISTINCT gene FROM TestResult WHERE animalId IN (1, 2)) m2 ON c.gene = m2.gene) calf ON sire.gene = calf.gene How do I get the SireIDs and CalfIDs to display their values when they don't have a record associated with a particular Gene? I was thinking of using COALESCE but I can't figure out how to specify the correct animalId to pass in. Any help would be appreciated.

  Read the article

• Brightness Crash and Fan issues in 12.04.1

  - by S.A. McIntosh

  I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

  Read the article

• cannot install new drivers for ATI Radeon HD mobility

  - by mugetsu

  I have an ATI mobility Radeon HD 3200 graphics card with a driver that I downloaded from my computer manufacturer's site. I wanted to upgrade the driver so I downloaded the respective driver from ATI and ran the installation. However, the installation only installs the download manager, the App SDK, C++ distributables and CCC, no display driver. When I try opening the CCC, I get an error that quits the CCC, something about the display driver not being recognized. What is wrong here? How do I go about fixing this? thanks

  Read the article

• How to display external database data in VBulletin 4 Forums Custom PHP Block?

  - by NJTechGuy

  Hi guys! I want to display data feed from an external database in a sidebar in the forums section. PHP Block Code : $host = 'db.123.net'; $dbUser = 'db49'; $dbPass = 'iReVbY'; $db = 'db6578h8'; mysql_connect("$host", "$dbUser", "$dbPass") or die(mysql_error()); mysql_select_db("$db") or die(mysql_error()); ob_start(); $result = mysql_query("SELECT id, title from abc") or die(mysql_error()); while($row = mysql_fetch_array( $result )) { print"<center>"; print "<a href=\"http://abc.com/?id=" . $row['id'] . "\"></a>"; print "</center>"; } $output .= ob_get_contents(); return $output; ob_end_clean(); How do I return an array to display in a PHP block in the sidebar (forums section)? Please help me out of this! Thank you..

  Read the article

• Why do Firefox and Opera ignore max-width inside of display: table-cell?

  - by brad

  The following code displays correctly in Chrome or IE (the image is 200px wide). In Firefox and Opera the max-width style is ignored completely. Why does this happen and is there a good work around? Also, which way is most standards compliant? Note One possible work around for this particular situation is to set max-width to 200px. However, this is a rather contrived example. I'm looking for a strategy for a variable width container. <!doctype html> <html> <head> <style> div { display: table-cell; padding: 15px; width: 200px; } div img { max-width: 100%; } </style> </head> <body> <div> <img src="http://farm4.static.flickr.com/3352/4644534211_b9c887b979.jpg" /> <p> Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec facilisis ante, facilisis posuere ligula feugiat ut. Fusce hendrerit vehicula congue. at ligula dolor. Lorem ipsum dolor sit amet, consectetur adipiscing elit. leo metus, aliquam eget convallis eget, molestie at massa. </p> </div> </body> </html> [Update] As stated by mVChr below, the w3.org spec states that max-width does not apply to inline elements. I've tried using div img { max-width: 100%; display: block; }, but it does not seem to correct the issue.

  Read the article

• How to disable "N" Wireless Mode RTL8192 (Thinkpad Edge 15 Core i5) in natty

  - by Gustavo Rubio

  I've seen many owners of thinkpad edges which are supossed to be linux-friendly having problems with wireless adapter. I've found several links inside askubuntu and in ubuntuforums which have a lot of work-arounds for those problems, mine seems to be wierd though. I use my laptop on both my office and at home. At home I have a router which is A/B/G and here at home the wireless connection works just fine, using a WEP key. But in work I have a B/G/N wireless router and it doesn't work, my guess is that this adapter works with N modes but somehow this is buggy in the bundled driver in natty. I've tried to disable the "N" mode in the router but that didn't work. Later I went to realtek website, downloaded their driver and compiled myself, kinda seems to work most of the time but sometimes some websites keep trying to load or load just parts of it and images start to look like their links are broken and so on, much like what you get when you were loading a page and suddenly the connection is lost. This problem, as I said, is only using the realtek driver from their website. Dmesg gives me this a lot of these: [ 5869.049454] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5 [ 5879.240563] DHCP pkt src port:68, dest port:67!! So I thougth I might as well switch back to the original driver which seems to work just fine on A/B/G wireless networks but not on N networks so if anybody knows how to disable that mode from within the driver please let us know :) Thanks in advance! PS: I do found a link to a similar question and it was answered but let me remind you I'm NOT using the intel version of wireless for my thinkpad but the realtek (RTL8192SvB)

  Read the article

• How do I get Poulsbo (GMA500) drivers to work?

  - by slayerman

  I'm trying to get working the Poulbo driver under Ubuntu 9.10. I've installed poulsbo-driver-2d poulsbo-driver-3d poulsbo-config packages from sudo add-apt-repository ppa:gma500/ppa. The packages installation is working. After I have to put in xorg.conf driver "psb". Then I reboot and I have no more display. I have to switch back to vesa in order to display back. Can someone give me some kind of solution?

  Read the article

• USB Flash Drive not Detected on 12.10 x64

  - by Falguni Roy

  My Mediatek usb flash drive is not get detected. The o/p of lsusb falguni@falguni-M61PME-S2P:~$ lsusb Bus 002 Device 002: ID 0e8d:0003 MediaTek Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub and the o/p of usb-devices falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub But in 12.04, the o/p of usb-devices was: falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0003 Rev=02.00 S: Manufacturer=MediaTek Inc S: Product=MT6235 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm It was working fine in 12.04. Now after upgrading to 12.10 the problem started. Where is the problem and how to solve it?

  Read the article

• fglrx: No matching Device section for instance... found how to fix it?

  - by Lejo

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev from lispci i foud out finally, that my video card is in 01:00.0 slot. logically, if fglrx searches for a vdeo card device in a wrong place, it will not find it. 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] Thanks in advance.

  Read the article

• Samsung Color Laser printer CLP-365W: all printout condensed into left half?

  - by ajo

  After installing the Samsung Color Laser Printer CLP-365W in 12.04, the printout is condensed into the left half of the A4 page (regardless whether 'fit to page' on or off). This happens both with the automatically recognised Ubuntu driver and the 'Unified Linux driver' from the Samsung website. (The 300.ppd (as per 'Unified driver' install) or 360.ppd are the closest matches to '365'.) Any help?? Test page printout Test page printout closeup

  Read the article

• Symfony: How to hide form fields from display and then set values for them in the action class

  - by Tom

  I am fairly new to symfony and I have 2 fields relating to my table "Pages"; created_by and updated_by. These are related to the users table (sfGuardUser) as foreign keys. I want these to be hidden from the edit/new forms so I have set up the generator.yml file to not display these fields: form: display: General: [name, template_id] Meta: [meta_title, meta_description, meta_keywords] Now I need to set the fields on the save. I have been searching for how to do this all day and tried a hundred methods. The method I have got working is this, in the actions class: protected function processForm(sfWebRequest $request, sfForm $form) { $form_params = $request->getParameter($form->getName()); $form_params['updated_by'] = $this->getUser()->getGuardUser()->getId(); if ($form->getObject()->isNew()) $form_params['created_by'] = $this->getUser()->getGuardUser()->getId(); $form->bind($form_params, $request->getFiles($form->getName())); So this works. But I get the feeling that ideally I shouldnt be modifying the web request, but instead modifying the form/object directly. However I havent had any success with things like: $form->getObject()->setUpdatedBy($this->getUser()->getGuardUser()); If anyone could offer any advice on the best ways about solving this type of problem I would be very grateful. Thanks, Tom

  Read the article

• I dont get the Graphics software

  - by Nicky Bailuc

  I have AMD Radeon HD 4850, with the latest drivers. I just dont get several things, what is x.org? What is FGLRX? Also, what is RandR? And why in the info section of the control centre it says Catalyst version is 12.6, but Catalyst control centre is 2.14, what is the difference between Catalyst and Catalyst control centre? Also, why is the Driver packaging version 8.98 while the Driver package says 12.6? I am extremely confused! As well as in the installer, what is the difference between choosing "Install Driver 8.98 on X.Org 6.9 or later" and "Generate Distribution Specific Driver Package"?

  Read the article

• Not able to display the progress bar using threading concept?

  - by Rakesh

  I am trying to show a progress bar while my process is going on...in my application there will be a situation where I gotta read files and manipulate them(it will take some time to complete)..want to display a progress bar during this operation..the particular function I am calling is an win 32 ...so if you check my code below ...I am able to display the progressbar but it doesnt show any progress..actually its not doing any further process...Please help me..thanks in advance //my function int Myfunction(....) { MSG msg; HWND dialog = CreateWindowEx(0,WC_DIALOG,L"Proccessing...",WS_OVERLAPPEDWINDOW|WS_VISIBLE, 600,300,280,120,NULL,NULL,NULL,NULL); HWND pBar = CreateWindowEx(NULL,PROGRESS_CLASS,NULL,WS_CHILD|WS_VISIBLE,40,20,200, 20, dialog,(HMENU)IDD_PROGRESS,NULL,NULL); SendMessage(pBar,PBM_SETRANGE,0,MAKELPARAM(0,noOfFile)); while(GetMessage(&msg,NULL,0,0)) { TranslateMessage(&msg); Dispatch(&message); } HANDLE getHandle = CreateThread(NULL,NULL,(LPTHREAD_START_ROUTINE)SetFilesForOperation(...), NULL,NULL,0); } LPARAM SetFilesForOperation(...) { for(int index = 0;index < noOfFiles; index++) { *checkstate = *(checkState + index); if(*checkstate == -1) { *(getFiles+i) = new TCHAR[MAX_PATH]; wcscpy(*(getFiles+i),*(dataFiles +index)); i++; } else { (*tempDataFiles)->Add(*(dataFiles+index)); *(checkState + localIndex) = *(checkState + index); localIndex++; } PostMessage(pBar,PBM_SETPOS,(WPARAM)index,0); } }

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >