Search Results

Search found 18363 results on 735 pages for 'external ip'.

Page 155/735 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Ubuntu 10.10 booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Does running Nexuiz gives extra pressure on Processor if you dont have external Graphics card?

  - by Curious Apprentice

  Its a rather stupid question, though I want to be sure. Does having a external graphics card can lower the stress over the processor? what kind of graphics card Ubuntu supports ? Well I'm planning to buy a graphics card for Windows 7 as I have started learning Adobe Premiere Pro. Which G card should I buy? Do i consider the card or the availability of the card drivers for Ubuntu Linux ? If I install a Graphics card and does not install its drivers can I left it unused on Ubuntu ? I don't think theres a much need for G card on Ubuntu Though.

  Read the article

• How strict are standard employer IP agreements about coding outside of work?

  - by JosephRT

  I'm in negotiations for a position with a large corporation and I'm reading their employment terms. In their IP/copyright section they state that anything that I do outside of work that is "similar" to what I perform on the job is also theirs. I understand that it's intentionally very vague to protect them, but I'm also a little nervous that it could be abused. The way I read it, anything I produce outside of work could be claimed as well, because it would fall under "programming". Is this relatively standard? Could I negotiate more specific terms (I have asked if I could get clarification)? Should I be worried that they could abuse this? I just don't want to be caught in a situation where come up with a (potentially) great idea outside of work and they swoop down and lay claim to it.

  Read the article

• Un outil générant de fausses IP vient défier Hadopi, SeedFuck remettra-t-il en cause les preuves de

  Un outil générant de fausses IP vient défier Hadopi, SeedFuck remettra-t-il en cause les preuves de culpabilité ? Toujours aussi cordialement détesté par une majorité de français, l'Hadopi (Haute autorité pour la diffusion des oeuvres et la protection des droits sur Internet) a désormais un nouvel adversaire. SeedFuck est un nouvel outil permettant de générer de fausses activités autour de contenus protégés sur les réseaux P2P. Evidemment, ce programme est totalement illicite, et nous ne vous en montrerons pas le code source, bien qu'il ai été rendu public. Son but est clairement de mettre des batons dans les roues des chasseurs de pirates, commandités par les ayants droits (comprenez les artistes, ou...

  Read the article

• Script to connect to hidden wireless network with static IP?

  - by nLinked

  Would like a script, when run, it should connect to a hidden wireless network with these details: SSID is "Wireless" Network is not broadcasting its SSID above (is hidden) WPA2-PSK, AES, password is "password" Static IP: 192.168.1.1 Def. gateway: 192.168.1.254 DNS: 192.168.1.254 No idea how to do this. But I do know the wireless interface is called wlan0 and I'm on Ubuntu 10.10. I don't want to use the built in Network Manager as it never auto-connects on startup. WICD doesn't work either. Any ideas most welcome.

  Read the article

• Grub Rescue Unknown Filesystem Error. Grub Corrupted or Filesystem?

  - by nightcrawler

  Now it has happened twice & have been pulling my hairs now... I have installed xubuntu on my external hardisk & have been using it for about 3 months. It has three partitions, one of 500 mb mounted at /boot, 2nd one of 48gb mounted at / & the rest (out of 160gb) is ntfs partition....used as normal external storage. The last storage supposedly acts as a buffer b/w Linux distributions & Win platform, buffer in the sense that it provides a universal channel for data transfers. I have constantly used this external hardisk for data transfers b/w win7 laptop & xubuntu (on this external hd) without any hassle. However, on of my desktops where I have ubuntu I (for the first time) attached this external drive which let me do data transfers where all three partitions properly mounted....but then nasty thing occurred the same that occurred before. I (as usual) tried booting via this external hd (one having xubuntu, one having being formerly used under Ubuntu) I got error Now I am totally devastated because similar thing happened ~6months before when I had fedora 17 in my external hd (instead of xubuntu) & after it was used under ubuntu the same happened...i didn't reported it because I already had planned towards debian instead of rpm! The mystery is that as long as I don't attach this external hd under ubuntu the data never** corrupts whereas under win xp/7 I can use it as a normal usb storage of coarse linux partitions aren’t available under win platforms... **From corrupts I mean hd fails to boot with the error mentioned however cant say whether data within remains untouched? It seems that my grub & or MBR is corrupted. Please sir guide me to solve this issue also why I cant attach & use linux external hds under linux platform Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004e7d0 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 976895 487424 83 Linux /dev/sdc2 978942 96874495 47947777 5 Extended /dev/sdc3 96874496 312575999 107850752 7 HPFS/NTFS/exFAT /dev/sdc5 978944 94726143 46873600 83 Linux /dev/sdc6 94728192 96874495 1073152 82 Linux swap / Solaris I can recall for sure that have seen a thread here when a similar problem occurred & in response someone gave solution of how to mount (now invisible) partitions & recover important data in them. I have misplaced that URL so if any can guide me thither because my important documents resides in / partition What I already have done: Without success I have tried this & related solutions What I plan to do: I believe that filesystem has corrupted & would you recommend solution like this provided I cant recall whether my /boot (500mb) partition was ext4 or ext2 though I am sure that my / (48gb) partition was ext4 UPDATE 1 Attached my external hd under Ubuntu ran followinf command as root grub-install /dev/sdc where /dev/sdc was my external hd containing corrupted xubuntu....it reported all done! I re-ran fdisk -l but to my disappointment it reported Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b6b9167 Disk /dev/sdc doesn't contain a valid partition table ...& now I can't even access its ntfs partition (former /dev/sdc3) please help? UPDATE 2 TestDisk (by cgsecurity) failed at founding any partition table :( TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sdc - 160 GB / 149 GiB - CHS 19457 255 63 Partition Start End Size in sectors

  Read the article

• UNC Path fails by IP "no network provider accepted the given network path", but works using hostname

  - by BoyMars

  I have an unusual problem with a Windows Server 2003 (Standard x86) box. It appears the machine will not accept connections to its shares (locally and from other domain member servers) by using its ip address in a UNC path. The error returned is: "no network provider accepted the given network path" This is the case with the machine's ip address: \\10.0.8.x and even the loopback address: \\127.0.0.1 \\localhost does not work... but using the hostname (fqdn or not) works: \\server & \\server.domain.local The local windows firewall for this server is off, ping/rdp/other services respond fine using the IP address. The following services are running and have been restarted: Computer Browser Workstation Server The server itself has been rebooted too. Event 8032 in the system log indicates that: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{29A6A925-AFB3-47E2-BA59-DDA086DEAE7A}. The backup browser is stopping. The domain controller has not been restarted, no other servers have experienced this problem, yet there are a number of browser (8021) related errors in the logs on this server. Does anyone have any suggestions? I would like to avoid rejoining this server to the domain if possible.

  Read the article

• External DNS and IIS Webserver requirement for Outlook Anywhere 2007 ?

  - by Albert Widjaja

  Hi, I just would like some clarification about which External hostname / DNS entries that I need to publish in my external facing DNS server to enable Outlook Anywhere on my Exchange Server 2007 for external user: ExCAS01.domain.com - Exchange CAS A Record Autodiscover.domain.com - Autodiscover CNAME to the CAS Server above _autodiscover._tcp.domain.com - SRV type record and do I have to expect anything by typing this address in bowser "https://autodiscover.domain.com/AutoDiscover/AutoDiscover.xml" ? because i get request time out at the moment. here are the error log from https://testexchangeconnectivity.com: Host Excas01.domain.com couldn't be resolved in DNS Exception details: Message: The requested name is valid, but no data of the requested type was found Type: System.Net.Sockets.SocketException Stack trace: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at Microsoft.Exchange.Tools.ExRca.Tests.ResolveHostTest.PerformTestReally() Host autodiscover.domain.com couldn't be resolved in DNS Exception details: Message: The requested name is valid, but no data of the requested type was found Type: System.Net.Sockets.SocketException Stack trace: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at Microsoft.Exchange.Tools.ExRca.Tests.ResolveHostTest.PerformTestReally() Attempting to locate SRV record _autodiscover._tcp.domain.com in DNS. The Autodiscover SRV record wasn't found in DNS.

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• How do I get a Mac to request a new IP address from another DHCP server running in parallel while Ne

  - by huyqt

  Hello, I have an interesting situation. I'm trying to us a Linux based machine to allow Mac's to Netboot (similiar to PXE boot) by running a DHCP service in parallel with the "global" DHCP server. The local DHCP server hands out IPs in a private subnet, e.g., 10.168.0.10-10.168.254-254, while the "global" DHCP server hands out IPs from the IP range 10.0.0.1 - 10.0.1.254. The local DHCP range is only supposed to be used in Preboot Execution Environment and Netboot. The local DHCP server is something I have control over, but I do not have access to the global DHCP server. I have a filter to only allow members with the vendor strings "AAPLBSDPC/i386" and "PXEClient". PXE works fine, but Netboot has a quirk. The Apple systems that haven't been connected to the network yet can Netboot fine. But once it grabs a "real" IP address from the global DHCP server, it will "save" it and request it the next time we want it to netboot (which the local dhcp server won't give it). This is what I want: Mar 30 10:52:28 dev01 dhcpd: DHCPDISCOVER from 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:29 dev01 dhcpd: DHCPOFFER on 10.168.222.46 to 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:31 dev01 dhcpd: DHCPREQUEST for 10.168.222.46 (10.168.0.1) from 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:31 dev01 dhcpd: DHCPACK on 10.168.222.46 to 34:15:xx:xx:xx:xx via eth1 Mar 30 10:52:32 dev01 in.tftpd[5890]: tftp: client does not accept options Mar 30 10:52:53 dev01 in.tftpd[5891]: tftp: client does not accept options Mar 30 10:52:53 dev01 in.tftpd[5893]: tftp: client does not accept options Mar 30 10:52:54 dev01 in.tftpd[5895]: tftp: client does not accept options This is what I get when it already has a "stored" IP: Mar 30 10:51:29 dev01 dhcpd: DHCPDISCOVER from 00:25:xx:xx:xx:xx via eth1 Mar 30 10:51:30 dev01 dhcpd: DHCPOFFER on 10.168.222.45 to 00:25:xx:xx:xx:xx via eth1 Mar 30 10:51:31 dev01 dhcpd: DHCPREQUEST for 10.0.0.61 (10.0.0.1) from 00:25:xx:xx:xx:xx via eth1: ignored (not authoritative). Do you have any suggestions? It would be much appreciated.

  Read the article

• Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

  - by Keeper Hood

  I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

  Read the article

• Get IP or MAC addresses of Windows Multipoint Server 2012 stations?

  - by user1454265

  Is it possible to programmatically retrieve the IP or MAC address of a station assigned to a Windows MultiPoint Server 2012 host, using PowerShell or any other .NET or Windows API? Background: I'm developing a application to help set up USB-over-Ethernet zero clients in a WMS 2012 setup, bridging the PowerShell "WmsCmdlets" module (Microsoft.WindowsServerSolutions.MultipointServer.PowerShell.Commands.Library.WmsStation) and a third-party vendor API for configuring zero client IP address, etc. So far, I do not know any means of matching up the "stations" of the WmsCmdlets with the zero client objects in the vendor's API. Finding out the IP or MAC associated with a WMS station would do nicely, since I have this on the zero client API side. However, I haven't found any information I could use in the PowerShell WmsCmdlets module, such as Get-WmsStation which returns the following: Id : 1 Name : <my station name> IsAutoLogOn : False IsSplit : False CollabId : 0 RemoteConnectionServerName : VirtualMachineName : VirtualMachineId : AutoLogOnUserName : AutoLogOnPassword : DeviceTypes : {DT_Mouse, DT_Keyboard, DT_Audio, DT_MassStorage...} DeviceCounts : {2, 2, 0, 0...} ComputerName : <my WMS host server name> SessionId : 4294967295 SessionHostServer : <my WMS host server name>

  Read the article

• IIS Windows Authentication not working in Internet Explorer via host name; works via IP

  - by jkohlhepp

  I'm trying to get a new Windows Server 2003 box working to host an ASP.NET application that uses Windows Authentication. Here's some info: IIS Anonymous Access is diabled IIS Integrated Windows Authentication is enabled I've tried it with and without Digest Authentication and it is the same result Both my machine and the server are in same active directory domain on the same intranet I'm using IE 6 My symptoms: In Firefox, via either IP or host name, a login box pops up, and if I enter my NT credentials, it works. In IE, via the server IP address, it works perfectly with no login box. In IE, via the server host name, it pops up a login box but even if I put in the correct credentials, it just pops up the box again. This is the problem. Why won't windows auth work in IE via host name but it will via IP address? Edit: Here's something else interesting. If I go into my Internet Explorer advanced settings and disable Windows Authentication, it seems to work just fine. And by work I mean that my test .NET app sees my NT ID as the current user.

  Read the article

• How to edit known_hosts when several hosts share the same IP and DNS name?

  - by Frédéric Grosshans

  I regularly ssh into a computer which is a dual-boot OS X / Linux computer. The two OS instance do not share the same host key, so they can be seen as two host sharing the same IP and DNS. Let's say the IP is 192.168.0.9, and the names are hostname and hostname.domainname As far as I understood, the solution to be able to connect to the two host is to add them both to the ~/.ssh/know_hosts file. However, it is easier said than done, because the file is hashed, and has probably several entries per host (192.168.0.9, hostname, hostname.domainname). As a consequence, I have the following warning Warning: the ECDSA host key for 'hostname' differs from the key for the IP address '192.168.0.9' Is there an easy way to edit the known_hosts file, while keeping the hashes. For example, how can I find the lines corresponding to a given hostame? How can I generate the hashes for some known hosts? The ideal solution would allow me to connect to seamlessly to this computer with ssh, no matter whether I call it 192.168.0.9, hostname or hostname.domainname, nor if it uses its Linux hostkey or its OSX hostkey. However, I still want to receive a warning if there is a real man-in-the middle attack, i.e. if another key than these two is used.

  Read the article

• Can I make TCP/IP session to run less than 60 seconds?

  - by par

  Our server is overloaded with TCP/IP sessions, we have 1200 - 1500 of them. Most of them are hanging in TIME_OUT state. It turns out that a connection in TIME_OUT state occupies a socket until 60 second time-out is elapsed. The problem is that the server gets unresponsive and many clients are not getting served. I have made a simple test: download an XML file from the server with Internet Explorer 8.0 The download finishes in a fraction of second. But then I see that the TCP/IP connection is hanging in TIME_OUT state for 60 seconds. Is there any way to get rid of TIME_OUT waiting or make it less to free the socket for new connections? I understand why TCP/IP connection enters TIME_OUT state, but I don't understand why Internet Explorer does not close the connection after the XML file download is over. The details. Our server runs web service written in Perl (mod-perl). The service provides weather data to clients. Client is a Flash appication (actually Flash ActiveX control embedded in Windows application). OS: Ubuntu Apache "Keep Alive" option is set to 0

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• HELP PLEASE!!!! External component has thrown an exception. ASP.NET ASPX PAGE POST

  - by Brandon

  I have an aspx page that communicates with a webservice I have. It connects to an SQL Server database on my virtual dedicated server. With just a little usage, I get this error External component has thrown an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.SEHException: External component has thrown an exception. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SEHException (0x80004005): External component has thrown an exception.] Luxand.FSDK.Initialize(String DataFilesPath) +0 WebService.onLoad() +70 WebService..ctor() +91 facematch.btn_submit_Click(Object sender, EventArgs e) +218 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746

  Read the article

• Am I able to forward traffic from an external subdomain to a specific local host?

  - by George Bowman

  I apologise in advance if the question doesn't make sense, please let me know. I've got a small LAN (~10 Virtual Servers) using Win Server 2008 as a DNS server. This is behind a smoothwall express 3.0 firewall with ports forwarded for specific services. I have a domain (123-reg) with the NS's that of afraid.org (DynamicDNS) and subdomains pointed to my (Dynamic) IP address e.g. subdomain1.example.com - 123.456.789.101. I think that adequately explains my set up. My question is, am I able to have subdomains e.g. subdomain1.example.com only point to a specific local host? Like so: subdomain1.example.com:80 - firewall(external facing) - server1.example.com:80 subdomain2.example.com:80 - firewall(external facing) - server2.example.com:80 I don't actually necessarily want to use port 80, otherwise I would just use VirtualHosts on apache, it is just an example port. Currently I can use either subdomain1.example.com OR subdomain2.example.com and they will both point to server1.example.com:80 I do not have to stay using Win Server 2008 for DNS, I am more than happy to move over to BIND if needs be, it was just easier to use Win Server 2008's DNS. I do not know if this is even possible, I have a feeling it isn't as I've only got one external IP address but any information is useful!

  Read the article

• Apache + Tomcat: Which one should handle SSL? IP-based proxy forwarding?

  - by delirial

  We currently have a Tomcat application running with SSL on port 443. Right now we have an apache server that accepts http requests on port 80 and redirects to the Tomcat instance: <VirtualHost *:80> ServerName domain.com ServerAlias domain.com <LocationMatch "/"> Redirect permanent / https://domain.com/ </LocationMatch> </VirtualHost> Tomcat is handling SSL, because there's no proxy, just a simple redirect to the SSL port: <Connector port="443" maxThreads="200" scheme="https" secure="true" SSLEnabled="true" keystoreFile="/app/ssl/domain_com.jks" keystorePass="ourpassword" clientAuth="false" sslProtocol="TLS"/> We want to begin using the apache web server as a proxy and additionally, do per-IP redirects to certain apps that should only be used by hosts on a pre-determined IP range. We would also like to redirect IPs that don't match the pre-determined list to a static html page hosted on the apache server. My first question is: Should I continue to handle SSL on Tomcat's end, or should I use apache with SSL while forwarding to an "unprotected" tomcat port? Is there any way to redirect to different apps (and potentially hosts) depending on the incoming IP? thanks, del

  Read the article

• External component has thrown an exception. ASP.NET ASPX PAGE POST

  - by Brandon

  I have an aspx page that communicates with a webservice I have. It connects to an SQL Server database on my virtual dedicated server. With just a little usage, I get this error External component has thrown an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.SEHException: External component has thrown an exception. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SEHException (0x80004005): External component has thrown an exception.] Luxand.FSDK.Initialize(String DataFilesPath) +0 WebService.onLoad() +70 WebService..ctor() +91 facematch.btn_submit_Click(Object sender, EventArgs e) +218 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746

  Read the article

• how to get ip address of a PPP(Point-to-Point Protocol) network interface?

  - by Xsmael

  I have a Linux machine with two network interfaces, and I'd like to get the IP address of the PPP interface w1g1 but it doesn't show up in ifconfig. There is a public IP on the PPP interface, but there is no internet connection, I'm trying to troubleshoot but I need to get the IP address of the interface and I can't. ifconfig : eth0 Link encap:Ethernet HWaddr 00:30:48:8D:F0:2C inet addr:192.168.2.254 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:fe8d:f02c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9970 errors:0 dropped:567 overruns:0 frame:0 TX packets:4338 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1441024 (1.3 MiB) TX bytes:915814 (894.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:675 errors:0 dropped:0 overruns:0 frame:0 TX packets:675 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50659 (49.4 KiB) TX bytes:50659 (49.4 KiB) w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:240 Metric:1 RX packets:748994 errors:0 dropped:0 overruns:0 frame:0 TX packets:748992 errors:0 dropped:0 overruns:0 carrier:3 collisions:0 txqueuelen:100 RX bytes:179758560 (171.4 MiB) TX bytes:179758080 (171.4 MiB) Interrupt:177 Memory:f881c400-f881e3ff w1g1 is connected to a modem by an RJ45<-Serial cable and the modem is connected to the phone line. The modem is a NOKIA DNT2Mi you can see it here Routing table : 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 169.254.0.0/16 dev eth0 scope link default via 192.168.2.180 dev eth0

  Read the article

• How do I automatically connect my client to an ODBC data source on another machine with dynamic IP?

  - by Kdansky

  At the customer's place, we've got a postgres DB on a server, and a few clients. We connect them through ODBC-drivers, and all machines run windows (usually XP). Now we had a few annoying issues: The client "forgets" some flags in the ODBC drivers, such as ByteA as LO. Every time anything changes, we have to reset that, and type in the password, and sometimes even the IP of the server. On x64 machines running Windows 7, configuring this is a pain as the system settings dialogue will only show 64-bit connections by default. And most importantly: If the server changes IP because the customer restarts or replaces a switch, all connections are lost. Annoyingly, this cannot be fixed with just correcting the IP, but rather, we have to check every single place (even hba_conf) because all the settings magically disappear. Our customers often are very small companies, where "server" means "that one PC in the other room", and not "Oracle mainframe in the dungeon", so we don't want to rely on them not restarting switches. Is there a better way than to rely on these really unstable settings? Are these settings somewhere in a file which I could edit manually, to make fixing it easier?

  Read the article

• Get part of array string

  - by user1560295

  Hello my output PHP code is : Array ( [country] => BG - Bulgaria ) ... and he comes from here : <?php $ip = $_SERVER['REMOTE_ADDR']; print_r(geoCheckIP($ip)); //Array ( [domain] => dslb-094-219-040-096.pools.arcor-ip.net [country] => DE - Germany [state] => Hessen [town] => Erzhausen ) //Get an array with geoip-infodata function geoCheckIP($ip) { //check, if the provided ip is valid if(!filter_var($ip, FILTER_VALIDATE_IP)) { throw new InvalidArgumentException("IP is not valid"); } //contact ip-server $response=@file_get_contents('http://www.netip.de/search?query='.$ip); if (empty($response)) { throw new InvalidArgumentException("Error contacting Geo-IP-Server"); } //Array containing all regex-patterns necessary to extract ip-geoinfo from page $patterns=array(); $patterns["country"] = '#Country: (.*?)&nbsp;#i'; //Array where results will be stored $ipInfo=array(); //check response from ipserver for above patterns foreach ($patterns as $key => $pattern) { //store the result in array $ipInfo[$key] = preg_match($pattern,$response,$value) && !empty($value[1]) ? $value[1] : ''; } return $ipInfo; } ?> How can I get ONLY the name of the Country like in my case "Bulgaria"? I think it will happen with preg_replace or substr but i dont know what is the better solution now.

  Read the article

• A "tinkered" PC can ping by IP, not by hostname. How to fix?

  - by aitchnyu

  Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >