Search Results

Search found 12281 results on 492 pages for 'ip blocking'.

Page 155/492 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Can't connect to Windows Server 2008 shared folders via VPN connection

  - by Pearl

  I set up an VPN connection on my 2008 server using RRAS. The VPN seems to work fine. I can connect from outside the network. I am also able to establish a remote access connection via the VPN-IP. However, I can't access my shared folders. After connecting to the VPN I can ping the server, but it is not shown in my networks. using \ip or \server-name doesn't work either, cannot be found. I checked ipconfig and this is what I found regarding the VPN: DNS-Suffix: Description: test Physical Adress: DHCP activated: No Auto-Config: Yes IPv4-Adress: 192.168.2.114 Sub: 255.255.255.255 Standard-gateway: DNS-Server: 192.168.0.1 NetBIOS: activated To clarify my IP-situation: server is connected to router with 192.168.0.x, the test-client is in an external network connected to a router with 192.168.1.x, server-client connection is using static ips with 192.168.2.x Can anyone help me with this one? The VPN should be ok since I am able to establish remote access.

  Read the article

• Internet connection sharing: Ubuntu 9.10 Server on Windows 7 and VMWare

  - by avesse

  I'm trying to get Internet Connection Sharing (ICS) working between my Windows 7 RTM host and a Ubuntu 9.10 Server running on VMWare Workstation 6.5, but I have not been able to get it right. Here's what I have done: Configured VMWare to use Host Only networking (I tried NAT as well). Enabled ICS on my host's network connection, allowing VMnet1. After enabling it, Windows informed me that its VMnet1 IP has changed to 192.168.137.1. So in VMWare's Virtual Network Editor I configured VMnet1: Subnet 192.168.137.0 Mask 255.255.255.0 I did the same for DHCP. For NAT i set 192.168.137.1 as Gateway. I cannot ping any sites or get access through apt-get/aptitude install/update, although domains do get resolved to IPs. I have also tried using a static IP in Ubuntu. I don't know if it makes a difference, but my external IP is locked to my host's MAC address.

  Read the article

• why would you create two different subnets on the same physical network?

  - by xirtyllo

  I'm working at a messy location, one of the strange (for me) things is that on the same physical network there are two different subnets. Specifically some computers will have 10.0.0.0/24 and some others will have 172.16.0.0/24. There is only one DHCP server, which gives IPs on the 10.0.0.0/24 range, and there are two internet gateways, one with IP 172.16.0.1 and one with IP 10.0.0.1 . To give an example, I can easily swap one PC from one subnet to the other just by changing its IP and gateway settings. I am trying to imagine why they created the network this way, and which may be the possible advantages and/or drawbacks of having two different subnets on the same physical network. Any thoughts?

  Read the article

• PXE boot not happening due to DHCP issue .

  - by Nishant

  I could PXE boot this laptop to some extent yesterday but all of a sudden after some time it started to show this error message . I reinstalled my tftp server etc in between . It seems that DHCP lease issue is happening . The client wants some specific address I think ? How to resolve List item Client requested address 0.68.101.98 [06/06 04:37:27.658] no more address or address previously allocated by another server [06/06 04:37:27.658] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:29.670] Client requested address 0.68.101.98 [06/06 04:37:29.670] no more address or address previously allocated by another server [06/06 04:37:29.670] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:33.679] Client requested address 0.68.101.98 [06/06 04:37:33.679] no more address or address previously allocated by another server [06/06 04:37:33.679] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:41.699]

  Read the article

• Can I log into a Domain account without pointing DNS to the domain controller?

  - by user72593

  My situation is as follows: I have a Windows 2003 Domain Controller which is also my DNS server. I have 10 Windows XP Pro PC's which all login to domain accounts. I am about the forward my DNS requests to OPENDNS so I can regulate web access but I have (2) PC's that I would like to keep unregulated. I manually changed their DNS server IP to (8.8.8.8) which worked but that caused my login to fail (by creating a 3 minute delay before it would let me get to the desktop) when I change the DNS IP back to the IP of the Domain Controller, everything works smoothly. Question is, how can I continue to login to the domain but have a different DNS path...is this possible ?

  Read the article

• Network Configuration

  - by Dario

  Hello, This is my situation: Router A: IP 192.168.1.1 Mask 192.168.1.0/24 - Connected to the internet. Server: - Interface eth0: inet addr:10.1.1.125 Mask:255.255.255.0 (connected to router B) - Interface ra0: inet addr:192.168.1.125 Mask:255.255.255.0 (connected to router A) Router B: IP 10.1.1.254 Mask 10.1.1.0/24 - Connected to Server's eth0 Computer: connected to Router B via WiFi connection. I configured a static route on Router B that use as default gateway 192.168.1.125 and i can ping that ip from computer. The problem is: how i can connect to the internet ? In other words, traffic coming from Server eth0 should use ra0 as gateway. Any suggestion ? Thank you

  Read the article

• Can't connect to STunnel when it's running as a service

  - by John Francis

  I've got STunnel configured to proxy non SSL POP3 requests to GMail on port 111. This is working fine when STunnel is running as a desktop app, but when I run the STunnel service, I can't connect to port 111 on the machine (using Outlook Express for example). The Stunnel log file shows the port binding is succeeding, but it never sees a connection. There's something preventing the connection to that port when STunnel is running as a service? Here's stunnel.conf cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [gmail] accept = 127.0.0.1:111 connect = pop.gmail.com:995 stunnel.log from service 2010.10.07 12:14:22 LOG5[80444:72984]: Reading configuration from file stunnel.conf 2010.10.07 12:14:22 LOG7[80444:72984]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: PRNG seeded successfully 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate loaded 2010.10.07 12:14:23 LOG7[80444:72984]: Key file: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Private key loaded 2010.10.07 12:14:23 LOG7[80444:72984]: SSL context initialized for service gmail 2010.10.07 12:14:23 LOG5[80444:72984]: Configuration successful 2010.10.07 12:14:23 LOG5[80444:72984]: No limit detected for the number of clients 2010.10.07 12:14:23 LOG7[80444:72984]: FD=156 in non-blocking mode 2010.10.07 12:14:23 LOG7[80444:72984]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail opened FD=156 2010.10.07 12:14:23 LOG5[80444:72984]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:14:23 LOG5[80444:72984]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 stunnel.log from desktop (working) process 2010.10.07 12:10:31 LOG5[80824:81200]: Reading configuration from file stunnel.conf 2010.10.07 12:10:31 LOG7[80824:81200]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: PRNG seeded successfully 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate loaded 2010.10.07 12:10:32 LOG7[80824:81200]: Key file: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Private key loaded 2010.10.07 12:10:32 LOG7[80824:81200]: SSL context initialized for service gmail 2010.10.07 12:10:32 LOG5[80824:81200]: Configuration successful 2010.10.07 12:10:32 LOG5[80824:81200]: No limit detected for the number of clients 2010.10.07 12:10:32 LOG7[80824:81200]: FD=156 in non-blocking mode 2010.10.07 12:10:32 LOG7[80824:81200]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail opened FD=156 2010.10.07 12:10:33 LOG5[80824:81200]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:10:33 LOG5[80824:81200]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.10.07 12:10:33 LOG7[80824:81844]: Service gmail accepted FD=188 from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:81844]: Creating a new thread 2010.10.07 12:10:33 LOG7[80824:81844]: New thread created 2010.10.07 12:10:33 LOG7[80824:25144]: Service gmail started 2010.10.07 12:10:33 LOG7[80824:25144]: FD=188 in non-blocking mode 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on local socket 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail accepted connection from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:25144]: FD=212 in non-blocking mode 2010.10.07 12:10:33 LOG6[80824:25144]: connect_blocking: connecting 209.85.227.109:995 2010.10.07 12:10:33 LOG7[80824:25144]: connect_blocking: s_poll_wait 209.85.227.109:995: waiting 10 seconds 2010.10.07 12:10:33 LOG5[80824:25144]: connect_blocking: connected 209.85.227.109:995 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail connected remote server from 192.168.1.9:24814 2010.10.07 12:10:33 LOG7[80824:25144]: Remote FD=212 initialized 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on remote socket 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): before/connect initialization 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server certificate A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server done A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client key exchange A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write change cipher spec A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write finished A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 flush data 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read finished A 2010.10.07 12:10:33 LOG7[80824:25144]: 1 items in the session cache 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects (SSL_connect()) 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 client renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects (SSL_accept()) 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 external session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache misses 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache timeouts 2010.10.07 12:10:33 LOG6[80824:25144]: SSL connected: new session negotiated 2010.10.07 12:10:33 LOG6[80824:25144]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.10.07 12:10:34 LOG7[80824:25144]: SSL socket closed on SSL_read 2010.10.07 12:10:34 LOG7[80824:25144]: Sending socket write shutdown 2010.10.07 12:10:34 LOG5[80824:25144]: Connection closed: 53 bytes sent to SSL, 118 bytes sent to socket 2010.10.07 12:10:34 LOG7[80824:25144]: Service gmail finished (0 left)

  Read the article

• How to legitimately work around ISP rate limits

  - by Derek Ting

  A lot of ISP rate limit the amount of e-mails that is sent from a particular IP address. What is the proper way to get around that rate limit? Our company has an iPhone application that sends many e-mails because of our large user base and many e-mails go to different ISPs that rate limit the number of messages coming from a specific IP. We do not send spam and we are a legitimate business. However, is there a better way to resolve this limitation rather than just getting a ton of IP addresses? Ideally, I wouldn't want to rely on a third party service to send mail. However, if its the only possible solution, we would consider.

  Read the article

• Cisco ASA - Enable communication between same security level

  - by Conor

  I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

  Read the article

• How to gain admin privileges on D-Link router if my isp is not allowing me to do so?

  - by Fischer

  So I switched to new ISP yesterday, they gave me a D-Link router, can't use my old router. I want to change the wireless password, went to 192.168.1.1, I can login with the the username and password user user, but not as admin. On the catalog it says that the default username and password are admin admin, tried that didn't work. Tried admin and no pass, tried many combinations, none worked. I asked some other users and they said that the isp is blocking the users from logging in as admins, and blocking the reset button, and said that there's a hack where you do something like: cmd telnet "router ip" and do something like dumpcfg. Could you please give a better explanation on how to gain admin privileges on your own router if your isp is not letting you do so by default?

  Read the article

• Apache localhost problem

  - by hart1994

  I have set up Apache on my Windows 7 PC. Now I have it working fine on the PC, by going to localhost or the IP (192.168.1.71). However when I go to my Mac I try to connect to it via its IP and it doesn't connect. I have also tried this on another computer. Oops! Google Chrome could not connect to 192.168.1.71 Now is there something wrong with the code in the Apache httpd file? EDIT: I have also tried to ping the IP address and it works fine.

  Read the article

• OpenVPN Push DNS Not Working Correctly On Windows

  - by woodsbw

  I currently have OpenVPN server setup on an Ubuntu machine, as well as DNSMasq. I am wanting to push DNS to the client (road warrior setup.) I had the push "dhcp-option DNS x.x.x.x" where x.x.x.x was an open OpenDNS server, for testing, and everything was working when I connected from my Windows client But now that I have DNSMasq setup, and I changed the "dhcp-option DNS x.x.x.x" to the DNSMasq server, but when they client connects it still receives the old, OpenDNS DNS server IP. I'm at a bit of a loss here, I have tried flushing DNS on the client, rebooting the server, and I even grep'd the entire server to see if the OpenDNS IP was in some other config I was missing...it wasn't. One other note, when connect to the VPN and explicitly run nslookup against against the DNSMasq IP, the addresses resolve correctly, so it isn't a DNSMasq issue.

  Read the article

• Net Screen manager setup

  - by Codezy

  I'm having an issue with our NSMExpress box. I'm trying to manage all our devices, range from ns5gt to ssg320m, and some of those devices have addresses assigned by dhcp from the ISP (like pppoe or dsl). The addresses are actually static but we have the register the MAC address in order to get this address. I can actually add the device in NSM except the IP that's on the untrust side isn't imported in as it's dynamic. Because of this I cannot change many options that pertian to the untrust interface as there is no IP. I've talked to JTAC on this and they didn't know if there was a way to do this or not but then they stated that Tim Hortons does this so I'm confused on how to get this working. Maybe i'm just missing something as I imagine that other people must be doing this as well. Any assistance is appreciated! Furthermore when I import a device this is the message I get: Warnings: Interface ethernet0/0 is a pppoe/dhcp/pppoa client and its ip is NOT IMPORTED because it may be dynamic.

  Read the article

• Calculate data transferred in a local LAN

  - by ramdaz

  How do you calculate the data flown between a computer and the gateway computer. I have a Linux router/gateway running IP Tables which routes internet traffic in a LAN. I have individual users with IP/MAC Address mapped who access Interet through the gateway computer. I would like to find out the traffic utilized by individual users. Is it possible for us to find out what kind of traffic was HTTP, SMTP, FTP etc. Is it also possible to pool the information on hourly basis, and get specific info so that I can store information in a database? I have heard of IP Accounting? Is that the right way

  Read the article

• Security question pertaining web application deployment

  - by orokusaki

  I am about to deploy a web application (in a couple months) with the following set-up (perhaps anyways): Ubuntu Lucid Lynx with: IP Tables firewall (white-list style with only 3 ports open) Custom SSH port (like 31847 or something) No "root" SSH access Long, random username (not just "admin" or something) with a long password (65 chars) PostgreSQL which only listens to localhost 256 bit SSL Cert Reverse proxy from NGINX to my application server (UWSGI) Assume that my colo is secure (Physical access isn't my concern for the time being) Application-level security (SQL injection, XSS, Directory Traversal, CSRF, etc) Perhaps IP masquerading (but I don't really understand this yet) Does this sound like a secure setup? I hear about people's web apps getting hacked all the time, and part of me thinks, "maybe they're just neglecting something", but the other part of me thinks, "maybe there's nothing you can do to protect your server, and those things are just measures to make it a little harder for script kiddies to get in". If I told you all of this, gave you my IP address, and told you what ports were available, would it be possible for you to get in (assuming you have a penetration testing tool), or is this really protected well.

  Read the article

• Microsoft ISA 2004 - Failed Connection Attempt

  - by Arief

  I have an issue where users with Android tablet cannot download apps through ISA 2004. This is what I get from the ISA 2004 logging: I did try to add the source ip address and the destination ip address in All for All Modified rule. However, it does not fix that problem. I also use GFI Web Monitoring. I did add the 151.101.13.80 ip address into the Whitelist, and no luck. What Failed Connection Attempt exactly is? How to overcome this. The Android tablet is throwing an error 495, could not be downloaded. Thanks everyone.

  Read the article

• Sonicwall settings for Polycom TFTP

  - by Michael Glenn

  I'm switching our VoIP phones (Polycom 301s and 501s) to our data network. They were previously segmented to their own network. This means disabling the DHCP on the Trixbox (Asterisk) server and configuring the Sonicwall TZ 210 DHCP to indicate that Trixbox is the TFTP server. The Polycom phones are stating "could not contact boot server". All phones are configured to TFTP and were confirmed working when previously using the Trixbox server for DHCP. Trixbox DHCP is now turned off. I've configured options 66(as String), 128(as IP) and 150(as IP) in DHCP and added them to a TFTP Option Group. I've enabled "Allow BOOTP Clients to use Range" for the Dynamic IP range and assigned the Option Group TFTP as the DHCP Generic Option Group. Any idea what I'm missing? Is there a separate tool to inspect the DHCP response to compare Trixbox to the Sonicwall?

  Read the article

• Setting up a proxy for FTP - Windows

  - by RadiantHex

  Hi folks, I have 2 windows machines and a server. 1 is my laptop, the other is a workstation that the IP of which is white-listed on the server. The laptop has a dynamic IP, so the IP cannot be white-listed. I would like to be able to perform FTP transfers from my laptop to the server, while using the workstation as a proxy. Both machines are using Windows 7. Is this possible? Help would be amazing!

  Read the article

• Windows 2008 Incoming Connection: Where/How is Server IPv4 address defined

  - by revelate

  We're evaluating a VM hosted externally which runs Windows Server 2008 R2 Web Server Edition and wish to access it via a VPN connection for maintenance and administration. RRAS isn't included in Web Server Edition, but it does have a form of VPN server called "Incoming Connections". This appears to work well and even supports multiple simultaneous connections. As we'll be using this VPN regularly we'd like to know if this is a viable solution or if we'd be better off upgrading to Standard Edition and full-fledged RRAS. In particular we're accessing the VM via the Private IP given by the Incoming Connection (currently 169.254.135.207) so we'd like know: if the server private IP might change every so often? if so is there any way to define it manually? or should we be using the server name rather than the private IP address? if so how can we be sure that it will resolve correctly? Name resolution over the "Incoming Connection" has worked on and off during our tests. Thanks for your help

  Read the article

• Error with FTP since binding via httpcfg

  - by Linda

  I was in a similar posistion to this question and bound two IP addresses using httpcfg. Since doing this ftp does not seem to be working on IIS6 in Windows Server 2003. Any ideas what could be wrong? The command I ran was: httpcfg set iplisten -i xxx.xxx.x.x I get the following when I try to conenct via Filezilla: Error: Connection timed out Error: Failed to retrieve directory listing The log file is returning the following: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2009-08-17 13:54:05 #Fields: date time c-ip cs-username cs-method cs-uri-stem sc-status sc-win32-status 2009-08-17 13:54:05 91.85.70.17 Client [1]USER Client 331 0 2009-08-17 13:54:05 91.85.70.17 Client [1]PASS - 230 0 In the ftp site settings I have the site pointing to the IP address used using httpcfg and the port set to 21. Update: I can see a directory listing if I connect via the inbuilt commandline ftp client in wondows vista. If I try to connect via a windows explorer I start in the incorrect folder and no files are listed just directories.

  Read the article

• How does bridged networking work?

  - by agz

  How does bridged networking work? I have looked through the virtualbox manuals but nothing extremely technical came up (It was just a generic gloss over of the topic) How does it assign a different ip to the virtual machine but uses the same network card? Why does this different ip (I found using ip addr under linux) not show up under the "attached devices section" of my router but I can port forward to it? How come if I connect to a password protected wifi network, it does not require me to enter my password? Is this multihoming?

  Read the article

• iptables forward rule not working in openwrt

  - by Udit Gupta

  I am trying to apply some iptables forwarding rules in openwrt. Here is my scenario - My server has two cards ath0 and br-lan. br-lan is connected to internet and ath0 to private network. The other m/c in n/w also has ath0 that connects with this server's ath0 and they are able to ping each other. Now, I want other m/c in network to use internet using br-lan of server so I thought of using iptables forwarding rule- Here is what I tried - Server : $ ping 1.1.1.6 // <ath0-ip of client> works fine $ iptables -A FORWARD -i ath0 -o br-lan -j ACCEPT $ /etc/init.d/firewall restart Client : $ ping 1.1.1.5 // <ath0-ip of server> works fine $ ping 132.245.244.60 // <br-lan ip of server> (not working) I am new to iptables stuff and openwrt. What I am doing wrong here ?? Any other help if anyone could suggest for my scenario Edit- m/c - machine n/w - network

  Read the article

• Qmail: relay only from selected servers based on rDNS

  - by Frank

  I'm looking for a way to disable Qmail relaying for everyone, but allow one certain group of hosts to do so. These hosts all use the same identifying rDNS entry. In Exchange 2003, Postfix, Exim and cPanel this can be achieved pretty easily. However, the only to do this with Qmail is to do this based on IP's. The IP's however tend to change. These changes can occur at any time, and it is impossible to keep all the servers up-to-date to the new IP's. Running a script that resolves the hostname and whitelists them accordingly is my last-resort option, but this is not fool-proof. Does anyone know whether this is possible and if so, how? Thanks!

  Read the article

• How to route traffic from a subnet 10.0.0.x to a network 200.208.88.17

  - by Guilherme Longo

  I have the following configuration Router : IP: 200.208.88.17 (Internet) MASK: 255.255.255.40 Server 2003 : IP: 10.0.0.1 (with dhcp server ativated) dhcp scope: 10.0.0.11 - 10.0.0.254 MASK: 255.255.255.0 clients : IP: 10.0.0.11 - 10.0.0.254 MASK: 255.255.255.0 At this point I have all computer set-up in one switch. All clients are receiving ip´s from the dhcp server. I need to enable the internet in every client. I am not sure how to route the traffic from the clients to the router that is providing internet access. Could you please point me to the right direction?

  Read the article

• Lan, vpn on Amazon EC2, how to?

  The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >