Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 155/287 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • why is Mac OSX Lion losing login/network credentials?

    - by Larry Kyrala
    (moved from stackoverflow...) Symptoms So at work we have OSX 10.7.3 installed and every once in a while I will see the following behaviors: 1) if the screen is locked, then multiple tries of the same user/pass are not accepted. 2) if the screen is unlocked, then opening a new bash term may yield prompts such as: `I have no name$` or lkyrala$ ssh lkyrala@ah-lkyrala2u You don't exist, go away! Even when our macs are working normally, everyone here has to login twice. The first time after boot always fails, but the second time (with the same password, not changing anything, just pressing enter again) succeeds. Weird? Workarounds There are some workarounds that resolve the immediate problem, but don't prevent it from happening again: a) wait (maybe an hour or two) and the problems sometimes go away by themselves. b) kill 'opendirectoryd' and let it restart. (from https://discussions.apple.com/thread/3663559) c) hold the power button to reset the computer Discussion Now, the evidence above points me to something screwy with opendirectory and login credentials. Some other people report having these login problems, but it's hard to determine where the actual problem is (Mac, or network environment?). I should add that most of the network are Windows machines, but we have quite a few Macs and Linux machines as well, but I'm not sure of the details of how the network auth is mapped from various domains to others... all I know is that our network credentials work in Windows domains as well as mac and linux logins -- so something is connecting separate systems, or using the same global auth system.

    Read the article

  • Using iptables to forward traffic destined for specific ip via specific interface

    - by shapeshifter
    I want to forward traffic destined for a specific ip from my internal network via a specific interface. I have two interfaces which are currently load balanced. I need all requests for a certain ip to go out via eth0 otherwise my external ip changes and sessions are dropped. eg. all requests from 10.1.1.1/24 to ip 11.22.33.44 on port 443 must go out via interface eth0. How can I do this with iptables?

    Read the article

  • Wired to wireless bridge in Linux

    - by adrianmcmenamin
    I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

    Read the article

  • How to install a "virtual" network card on a virtual server?

    - by vikp
    Hi, We have purchased an unmanaged VPS windows hosting solution from one of the UK based companies. We have Windows Server 2008 Standard Edition. We need to install certain third party applications on that server. Unfortunatelly, one of the applications requires a MAC address to be present at all times - this is their way of making sure that software is not pirated (which it isn't). We have tried installing a virtual loopback network card, but this has brought the server down - i.e. we couldn't connect using remote desktop any longer. At the moment we are limited with what we can try. This is an unmanaged solution, therefore any support including restarts is rather costly. Are you aware of any low-risk solutions? Thank you

    Read the article

  • Extending a home wireless network using two routers running tomato

    - by jalperin
    I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

    Read the article

  • How to make Windows 7 Network show Samba share after VM is rebooted/restored?

    - by lackey
    On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?

    Read the article

  • Wi-fi signal with keeping the internet cable

    - by daGrevis
    So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

    Read the article

  • Where are Wireless Profiles stored in Ubuntu

    - by LonnieBest
    Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

    Read the article

  • How to configure traffic from a specific IP hardcoded to an IP to forward to another IP:PORT using i

    - by cclark
    Unfortunately we have a client who has hardcoded a device to point at a specific IP and port. We'd like to redirect traffic from their IP to our load balancer which will send the HTTP POSTs to a pool of servers able to handle that request. I would like existing traffic from all other IPs to be unaffected. I believe iptables is the best way to accomplish this and I think this command should work: /sbin/iptables -t nat -A PREROUTING -s $CUSTIP -j DNAT -p tcp --dport 8080 -d $CURR_SERVER_IP --to-destination $NEW_SERVER_IP:8080 Unfortunately it isn't working as expected. I'm not sure if I need to add another rule, potentially in the POSTROUTING chain? Below I've substituted the variables above with real IPs and tried to replicate the layout in my test environment in incremental steps. $CURR_SERVER_IP = 192.168.2.11 $NEW_SERVER_IP = 192.168.2.12 $CUST_IP = 192.168.0.50 Port forward on the same IP /sbin/iptables -t nat -A PREROUTING -p tcp -d 192.168.2.11 --dport 16000 -j DNAT --to-destination 192.168.2.11:8080 Works exactly as expected. IP and port forward to a different machine /sbin/iptables -t nat -A PREROUTING -p tcp -d 192.168.2.11 --dport 16000 -j DNAT --to-destination 192.168.2.12:8080 Connections seem to timeout. Restrict IP and port forward to only be applied to requests from a specific IP /sbin/iptables -t nat -A PREROUTING -p tcp -s 192.168.0.50 -d 192.168.2.11 --dport 16000 -j DNAT --to-destination 192.168.2.12:8080 Times out as well. Probably for the same reason as the previous entry. Does anyone have any insights or suggestions? thanks,

    Read the article

  • Likeliness of obtaining same IP address after restarting a router

    - by ?affael
    My actual objective is to simulate logged IPs of web-site users who are all assumed to use dynamically assigned IPs. There will be two kinds of users: good users who only change IP when the ISP assignes a new one bad users who will restart their router to obtain a new IP So what I would like to understand is what assignment mechanics are usually at work here deciding from what pool of IPs one is chosen and whether the probability is uniformly distributed. I know there is no definite and global answer as this process can be adjusted be the ISP but maybe there is something like a technological frame and common process that allows some plausible assumptions. UPDATE: A bad user will restart the router as often as possible if necessary. So here the central question is how many IP changes on average are necessary to end up with a previously used IP.

    Read the article

  • Random and Selective ARP blindness in VMWare ESXi 4.1

    - by Peter Grace
    We have multiple VMWare ESX servers spread out amongst our company, doing various tasks. One particular ESXi host is exhibiting very peculiar behavior. We detect it when our monitoring system (Orion) notifies us that it can no longer ping the box. Upon jumping on the local console of the guest in question, we see that it cannot ping any new addresses that aren't already in its ARP table. At first we thought that the problem was just related to one of our guests, as the problem seemed to always happen to another guest, DevRedis. However, this afternoon the problem swapped and started happening on ApacheBox rather than DevRedis. When I have been fortunate to catch the problem, I have run tcpdump on both sides of the connection (one side being vmware, the other side being a physical webserver) and have noticed the following course of events: Guest ApacheBox sends an ARP request for the physical address of server WindowsBeast WindowsBeast tenders an ARP is-at back to the network indicating its physical mac address. ApacheBox never sees the ARP is-at response. The ESX host in question is running VMware ESXi, 4.1.0, 348481 The two guests (DevRedis and ApacheBox) are both running CentOS 6.3, however they are running two separate kernel versions ( 2.6.32-279.9.1.el6.x86_64 and 2.6.32-279.el6.x86_64 ) so I'm not entirely sure it's a CentOS problem. Does anyone have any thoughts on what might cause this? Has anyone run into it before?

    Read the article

  • Different Ip adress range from provider

    - by victor
    I have different ip-range on the network, the dhcp is from the bordaband that says it uses different iprange as balancednetwork. however this causes issue as my nas and other computer gets the otner iprange of 84 and some computer gets iprange start at 94.254. i have use netgear switches gs108v2 but still get the issue with different ip adress. would apriciate answer on how i can get all devies on the same ip-range thanks

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Do I need a Gigabit router with a 24Mbps down and 7Mbps upload speed cable modem?

    - by djangofan
    Do I need a Gigabit port capable wireless router with a 24Mbps down and 7Mbps upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 Mbps port can easily handle it. Is that true?

    Read the article

  • DHCP Relay setup in ubuntu server

    - by jerichorivera
    I have a network appliance (QNO) that works as traffic load balancer and dhcp server. I would like to add a linux server in between the network appliance and the client computers. The linux server will be used to monitor bandwidth usage. My problem is I still want DHCP to be served by the network appliance so that load balancing will still work efficiently. We are afraid that if we setup the linux server as the DHCP server the network appliance will not be able to load balance the traffic if it only sees the linux server as a single client connecting to it. I've been searching all over for a tutorial on how to setup DHCP relay but have not found any. How do I setup DHCP relay on my linux server given there are two NICs attached to it, one connects the linux server to the network appliance and the other connects the linux server to the client computers. EDIT Router (DHCP) ---- [eth0] Linux Server (Relay agent) [eth1] ----- PC (network) Router IP is 192.168.0.100 eth0 is on DHCP eth1 is static 192.168.2.11 (if I need to change this I can) Tried to do dhcrelay -i eth1 192.168.0.100, but the PC was not getting any DHCP lease from the DHCP router. I might be missing something here.

    Read the article

  • Variable TTL inside a LAN

    - by user140783
    I recently discovered that ping my local router, returns different TTL values??. The ping 3 switch must pass through before reaching the router, there may be the problem? 192.168.1.99 is the IP of my router , a Cisco WRT120N Thank you! Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo=29ms TTL=3 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=131 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=111 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=240 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=51 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66 Traceroute G:\Documents and Settings\Administrador>tracert 192.168.1.99 Traza a la dirección maxi2011 [192.168.1.99] sobre un máximo de 30 saltos: 1 <1 ms <1 ms <1 ms maxi2011 [192.168.1.99] Traza completa. G:\Documents and Settings\Administradorping 192.168.1.99 Haciendo ping a 192.168.1.99 con 32 bytes de datos: Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Estadísticas de ping para 192.168.1.99: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms G:\Documents and Settings\Administrador

    Read the article

  • Routers with USB plug to connect external storage

    - by sixtyfootersdude
    I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

    Read the article

  • Can't find a wireless access point's IP address after changing router IP/LAN settings

    - by flagg19
    I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

    Read the article

  • Windows 7 - Samba share remember password

    - by crmpicco
    I have a Samba share setup on my Windows 7 machine which allows me to access a CentOS 5.6 VM running on my machine with VirtualBox. When I restart my Windows machine I have to start the VM, as you would expect. However, when I go to connect to my Samba share in Windows it asks me for the password every time - even if I tick 'Remember My Password'. Is there any way to store the password for the VM so that it doesn't ask me every time?

    Read the article

  • Laptop loses signal from WiFi router, but mobile phone holds it fine

    - by Anton
    I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

    Read the article

  • How do I purge or empty Windows Explorer's network username and sharename cache?

    - by Abel
    While troubleshooting a Samba vs Windows Network issue, I noticed that Windows' Explorer remembers login credentials of remote shares, even if you ask it not to. For instance, after accessing a share using \\servername\sharename plus entering username/password and then closing Windows Explorer, adding the same share as a network drive gives the following message, regardless whether the username is the same or not: The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share. Using NET USE does not show the share. After restarting the computer, I have no problems accessing the share using different credentials. But restarting just for testing other credentials is annoying, esp. while troubleshooting. How can I purge this cache, using Windows Vista? Note: using nbtstat -R[R], ipconfig /renew, killing explorer.exe or disabling / re-enabling the network card didn't help.

    Read the article

  • dnsmasq local network works for some but hostnames are not resolving for others

    - by prggmr
    I have set up a local network and it seems that some of us can use it properly while others can't. The problem seems to be that the local hostnames I setup don't get resolved for everyone. To overview how the network is setup: I am running an Ubuntu 10.01 server using dnsmasq, this server is setup to act as our primary DNS server, configured via our router. dnsmasq is configured using the options of domain-needed bogus-priv I use the /etc/hosts file to determain the hostnames 192.168.1.10 ra.xsi 192.168.1.10 test.xsi From my machine: If I dig the hostnames they resolve properly ; <<>> DiG 9.4.3-P1 <<>> ra.xsi ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61671 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 9 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:28:34 2011 ;; MSG SIZE rcvd: 40 Ping also works: PING ra.xsi (192.168.1.10): 56 data bytes 64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=0.834 ms 64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=0.699 ms ^C --- ra.xsi ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.699/0.766/0.834/0.068 ms And login via SSH works using the hostname. For those that cannot connect using hostnames, if I dig from their machine it appears the name is being resolved, but they cannot ping, SSH or http access the hostname. ; <<>> DiG 9.6.0-APPLE-P2 <<>> ra ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12554 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 8 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:05:50 2011 ;; MSG SIZE rcvd: 36 I've been banging my head at this and just can't seem to figure it out.

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >