Search Results

Search found 7634 results on 306 pages for 'preg replace'.

Page 155/306 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Macbook Pro 15-inch replacement battery.

  - by ricbax

  So I've finally got to the 300+ cycles with my MBP 2008's original battery. Apple is pretty much "on the money" too! I am at 79% Health and getting the Condition: Replace Soon warning. So I went out to the closest Apple Store and bought a replacement. I would like to get the same lifespan out of my replacement if possible. My question is: The battery comes with a 2 dot (green) charge on the indicator, should I put the battery in and let it run down and do a full recharge OR begin charging it immediately and then let it run all the way to empty and recharge?

  Read the article

• how to restrict wampserver access to certain ip addresses

  - by user28233

  What do I need to do in order to restrict the access to my wamp server to certain ip addresses. Just imagine that the my ip address is the ip address that I only want to have access I tried to edit the .htaccess # This folder does not require access over HTTP # (the following directive denies access by default) Order allow,deny Allow from 112.203.229.44 and the phpmyadmin.conf: Alias /phpmyadmin "E:/wamp/apps/phpmyadmin3.2.0.1/" # to give access to phpmyadmin from outside # replace the lines # # Order Deny,Allow # Deny from all # Allow from my ip address # # by # # Order Allow,Deny # Allow from my ip address # <Directory "E:/wamp/apps/phpmyadmin3.2.0.1/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from my ip address </Directory>

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• Parity Initialization after putting in two new disks

  - by lbanz

  All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

  Read the article

• Recover data from phyiscally damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: Picture of damage I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a phyiscally damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are.

  Read the article

• Upgrading Active Directory from 2000 to 2008

  - by Doug

  Our config is currently: 1 Windows 2000 domain controller running ISA2000, dhcp, dns 1 Windows 2003 domain controller as main file server, prob cert server as well, dhcp, dns 1 Windows 2008/Exchange2010 domain controller as Exchange server, DHCP,DNS Currently getting FRS errors on files server journalwrap error Currently getting FRS errors on othe DC's can't replicate from above Exchange DC holds Schema, rid,pdc, and infastructure roles File Server holds Domain namaing operation master role WOW, I didn't set this up, just inherited it. Am I right to assume that fixing the FRS errors is #1, what do I need to do for that? set enable journalwrap auto restore in registry? Demote W2000 domain controller, should that have any implications for ISA? We have Forefront to be deployed but that's another day Transfer Domain Nameing Role to Exchange server (I know or think having an Exchange server as DC isn't best practive) We will be getting another server W2008 to replace current file server and I thought it could takeover all roles once deployed Demote W2k3 file server and then raise functional domain level to 2008 Am I missing anything other that the sense to walk away? Thanks

  Read the article

• How to display "Comic Sans MS" in Linux?

  - by Roman

  I use "Comic Sans MS" font on my web page. The web page looks OK if I open it under Windows and MAC. But it does not work under Linux. How can I solve this problem? May be I can put the font on my web server? Is this font available for free? Can it slow down my page? Or may be I can replace "Comic Sans MS" by another font which is similar and is available on the 3 operation systems?

  Read the article

• MySQL Server - Got error -1 from storage engine

  - by Bobby

  I am currently trying to restore a MySQL table from the .ibd file. I have been following the instructions on the MySQL reference manual on how to use DISCARD and IMPORT TABLESPACE to replace the .idb files. Discarding the tablespace returns no error and the file is deleted however IMPORTING the replacement .ibd file yields a "Got error -1 from storage engine" error. There doesn't seem to be too much information about what exactly an error -1 is. Does anybody have any further insight as to why an import table space isn't working?

  Read the article

• apache returning "The connection was reset"

  - by usjes

  One of my dedicated servers had some network issue today and the data center has to replace some router. Since then the sites on that server returns "The connection was reset" error most of the time. I tried installing nginx and it opens better, but it still shows the error sometimes. Everything in the config seems normal, what could be causing this error? UPDATE: Just noticed that in whm apache status there are always only 1 requests currently being processed, 8 idle workers. I know for sure the server received thousands of requests per minute. What could be limiting this to such a low number?

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• Computer not working, motherboard is suspect

  - by Arlen Beiler

  I have a problem with my computer. I have a GeForce 6100 M9 Motherboard, which I suspect is broke. The capacitors beside the CPU are corroded and the computer doesn't do anything except start the fans when I push the power button. The problem is that I can't find another motherboard as they apparently don't sell this model anymore. I have tested the Power Supply and it appears to be working. Any advice would be appreciated. Different forums have mentioned that you can replace the capacitors. Any help on this would be appreciated.

  Read the article

• How to disable Windows File Protection in Windows XP or 7 from Registry?

  - by SEARAS

  How to disable Windows File Protection in Windows 7 and/or XP from Registry? I want to automatically replace a driver with my created driver. I used PendingFileRenameOperations key in HKLM\System\CurrentControlSet\Control\Session Manager but i've found that it can ONLY be used for simple (not-system) files, because Windows File Protection disables it for system files (see this post). Now I need to temporarily disable WFP (and turn it on after changing driver). You can tell me another way to disable it. It can help me too. Thanks in advance! Any ideas?

  Read the article

• WesternDigital SmartWare - still problematic?

  - by FrustratedWithFormsDesigner

  I've seen a lot of bad press on WD SmartWare (I think it comes on most WD backup devices now, such as their MyBook product line), mostly related to how it's impossible to remove properly or replace. There are allegations (I couldn't tell how true they were) that it has/is a rootkit, as well. Most of the articles are a couple of years old, so I'm wondering if SmartWare is still just as problematic as it was. Does it still have a nasty rootkit reputation and should I just stick with the Windows 7 built-in backup system, or is the current SmartWare generation improved and better behaved?

  Read the article

• PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

  - by Jody

  This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

  Read the article

• Powershell script to append an extension to a file, input from CSV

  - by Jeremy

  Hi All, All I need is to have an Excel list of file paths and use Powershell to append (not replace) the same extension on to each file. It should be very simple, right? The problem I'm seeing is that if I go input-csv -path myfile.csv | write-host I get the following output: @{FullName=C:\Users\jpalumbo\test\appendto.me} @{FullName=C:\Users\jpalumbo\test\append_list.csv} @{FullName=C:\Users\jpalumbo\test\leavemealone.txt} In other words it looks like it's outputting the CSV "formatting" as well. However if I just issue import-csv -path myfile.csv, the output is what I expect: FullName -------- C:\Users\jpalumbo\test\appendto.me C:\Users\jpalumbo\test\append_list.csv C:\Users\jpalumbo\test\leavemealone.txt Clearly there's no file called "@{FullName=C:\Users\jpalumbo\test\leavemealone.txt}" and a rename on that won't work, so I'm not sure how to best get this data out of the import-csv command, or whether to store it in an object, or what. Thanks!!

  Read the article

• Braces (syntax) highlighting in OpenOffice Math formula text editor

  - by Oleksandr Bolotov

  When you use OpenOffice Math, in upper part you see formula and formula text editor in lower part. Almost like this: %sigma = 2 %mu %epsilon + %lambda Tr(%epsilon)I So my questions are: How to replace OpenOffice Math's formula text editor with own text editor? ... or how to enable braces (syntax) highlighting in embedded editor? ... are there any extensions for anything like this? I need this because sometimes it's too much braces and stuff and it's hard to distinguish which braces match each other. Please do not suggest me to use MathType Mathematica (or anything) instead of OpenOffice Math (because I'm almost happy with it:)

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Long string insertion with sed

  - by Luis Varca

  I am trying to use this expression to insert the contents of one text file into another after a give string. This is a simple bash script: TEXT=`cat file1.txt` sed -i "/teststring/a \ $TEXT" file2.txt This returns an error, "sed: -e expression #1, char 37: unknown command: `M'" The issue is in the fact that the contents of file1.txt are actually a private certificate so it's a large amount of text and unusual characters which seems to be causing an issue. If I replace $TEXT with a simple ASCII value it works but when it reads the large content of file1.txt it fails with that error. Is there some way to carry out this action? Is my syntax off with sed or my quote placement wrong?

  Read the article

• How to INF mod: Replacing 32bit dlls with 64bits

  - by Nime Cloud

  I've got a driver setup for 32 bit: An INF file and an x86 folder with two 32 bit dlls. I need to replace these 32 bit dll files with 64 bit ones. I just simply overwrite 32 bit files but no lock. How can I make 64 bit version of the driver? Update: I tried original setup files on 32 bit Windows XP, setup asks for WdfCoinstaller01009.dll, I just simply browse & point the file from somewhere on XP. ;-------------- WDF Coinstaller installation [DestinationDirs] CoInstaller_CopyFiles = 11 [silabser.Dev.NT.CoInstallers] AddReg=CoInstaller_AddReg CopyFiles=CoInstaller_CopyFiles [CoInstaller_CopyFiles] WdfCoinstaller01009.dll [SourceDisksFiles] WdfCoinstaller01009.dll=1 [CoInstaller_AddReg] HKR,,CoInstallers32,0x00010000, "WdfCoinstaller01009.dll,WdfCoInstaller" [silabser.Dev.NT.Wdf] KmdfService = silabser, silabser_wdfsect [silabser_wdfsect] KmdfLibraryVersion = 1.9

  Read the article

• Using sed to convert hex characters in postgresql dump file

  - by Bernt

  I am working on moving several databases from a Postgresql 8.3 server to a Postgresql 8.4 server. It has worked fine so far, but one base has given me some trouble. The database is listed as unicode-encoded in the 8.3-server, but somehow a client program has managed to inject some invalid unicode data into it. When I do a normal dump and restore using postgres' custom format, the new server won't accept it, complaining about unicode errors. My plan is to do a plain text dump of the database, then use sed to replace the invalid characters with nothing (they are not needed). But how do you make sed work on hex/binary values in a file?

  Read the article

• Do two portforward rules translate to "and"?

  - by blsub6

  I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless. Accessing the router itself (admin UI) is without issues, no delay whatsoever. But when I try to access a service on another computer in the network the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine turning off firewall on the target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• Lync Server 2010 with Hosted VoIP PBX

  - by kmehta

  We just deployed Lync Server 2010 in our organization and it is working great so far. The next step for us is to enable enterprise voice so that we can replace our telephones with service that is handled 100% by Lync. This is where I am at a loss. I have a fully deployed Standard Edition Lync server and a hosted VoIP PBX provider with VoIP handsets. I would like to get rid of the handsets and have my company's phone service be handled by Lync client (e.g. someone calls my work number, and Lync rings instead of my old handset that is set up with the PBX) I am new to deploying these types of features. Any help is appreciated. Thanks.

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >