Search Results

Search found 5712 results on 229 pages for 'card'.

Page 156/229 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Which software raid modes does each version of Windows 7 support?

  - by Goyuix

  Being familiar with the software raid modes and dynamic disks from the server versions, I was wondering if there is a document or even just common crowd knowledge that indicated what software raid support was available for each version of Windows 7. Also - all the various raid levels supported for booting or just a data recovery mechanism (e.g. you can connect three RAID-5 dynamic disks to an already booted system). I would prefer to stay away from modified/copied DLL's from the server variants, as well - please note - this is Windows software RAID - not fake-raid from your BIOS or an add-on card.

  Read the article

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Weird problem, special characters coming after formatting the hard drive, computer isn't starting 0_

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting (quick format) and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• LCD problems: brightness / contrast blown out, can't bring up menu

  - by davr

  Yesterday, when I turned on my LCD monitor, the colors were very very bright. It looks as if someone had gone into the monitor on-screen-display and turned up brightness & contrast all the way to the max. Colors were washed out, and it's almost painful to look at. So I tried to go into the menu and see if the settings were wrong somehow...and I found that I cannot bring up the menu. All the buttons on the front of the monitor now do nothing, except the power button. I was able to go into my graphics card settings, and turn the brightness way down to compensate, so it's at least usable for now, but it's not quite right, there is definitely some loss of color resolution or something from the two extreme settings canceling each other out. Any ideas what kind of failure in the LCD might cause this? According to the control panel, the model number is: KL2490DW-D It's a 24" 1920x1200 with the brand "synaps".

  Read the article

• IP Camera working on lan but not on internet

  - by Kevin Boyd

  My IP cam model is Genius 350TR, I tested the cam at home on lan and internet and it worked. Then I shifted it to an office. It works on the office lan setup but I cannot connect to the ip cam from home. The IP cam is configured for port 192.168.0.30:7070 and it has a port forwarded to publicIP:7071 When I telnet to that public IP it connects to that port. However when I try to access the ip cam from a web browser it only shows me the configuration page and settings and the video is blank and it says connecting for some time and then says disconnected. The cam is configured for HTTP on internet and UDP on Lan. The office setup is ISP --- WifiRouter --- PC With Wifi card --- Switch --- IP CAM Is there a way to debug this problem?

  Read the article

• How to enable printer settings over Jetdirect on HP 4100N

  - by zsero

  I have a HP 4100N printer and I am using it over network. Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want. There should be a supplies, config, print info, etc. page, what are not visible now. Can you tell me what setting should I set to enable this printer config page on the webserver? The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).

  Read the article

• Streaming media from linux server - low footprint is crucial

  - by Mike Haye

  I recently pre-ordered the Raspberry Pi. http://www.raspberrypi.org/faqs For those of you who don't know it, it's a machine with 256 mb ram and a 700 MHz processor for $35. I plan to run linux on an SD card on this machine and have it act as both a htpc, VPN and media server. In regard to the media server part, I need to find some linux software that has a small footprint, but allows me to stream media to other devices connected to the internet (preferably without having to install any additional software on the client machines) Also, I would love if the video could be compressed, so the data usage wouldn't be so big for the client machine (e.g. when I'm using my data plan on my smartphone ;) ) Thanks in advance for any answers :) Mike.

  Read the article

• Tripple-Head Setup: Raedon 5770

  - by Aren B

  I currently own a Sapphire Raedon HD 5770 1GB w/ DDR5 (Link) I've got two LCDs set up in this configuration: +---------++------+ | || | | 1 || 2 | +---------++------+ Im looking into buying a new TV/Monitor, a Samsung T240HD (h**p://www.memoryexpress.com/Products/PID-MX22473(ME).aspx) and I'd like to set up a tripple monitor setup like this (new monitor being #3) +---------++------++---------+ | || || | | 3 || 2 || 1 | +---------++------++---------+ Monitor 1: DVI Monitor 2: DVI Monitor 3: HDMI PS3 - Monitor 3: HDMI2 Is this possible with my current video card? Can I plug in 2x DVI + 1x HDMI and get a third display? Or am I going to have to buy a slew of Display Port Adapters? I know older video cards you could only have 2 active displays, but I heard that barrier was defeated with the Display-Port series video cards.

  Read the article

• Why screen freezes in Windows 7 and Vista?

  - by Hasan Gürsoy

  On Windows 7 and Vista I use auto-hide task bar and turn off graphic card after 1-2 minutes. When I want to use my desktop again screen freezes sometimes for 10 seconds. What I do does not effect anything immediately but cursor moves. For example if I click Firefox bookmark it opens when screen unfreezes. This happens at any of my computers and about a month after new installation. I don't think that problem is related with the drivers.

  Read the article

• Linux and GEForge 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GEForce 8400 GS with two connected monitors. I tried with fedora 12 and ubuntu 9.1 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on ubuntu, it simply hang up during the boot. With fedora I get this erro: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Have I to install something else? (a driver for my video card for example).

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by andybaird

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• Raspberry Pi stuck at splash screen

  - by Matthew

  I have a raspberry pi and I am stuck at the splash screen. In the top right of the screen there is an image of a Raspberry. When I first power on the device, I get the colored screen, and then I get the image of the raspberry followed by a white cursor which quickly freezes or disappears. I put on the debian version of wheezy that allows java. (the soft float version) Any assistance would be greatly appreciated. BTW I did have it working at one point in time and all I did was go to the terminal (logged out of the GUI) and did a shutdown -h now command. But since then I've even started with a brand new version of the image and it is still not working. Oh and I did try the same SD card with a version of arch linux and it worked fine.

  Read the article

• Acer Ferrari 3000 in portrait display mode

  - by Riri

  I have a Acer Ferrari 3000 noetbook that I like to connnect to a external dispaly and show it in portrait mode. The computer runs a ATI Radeon 9200 graphic chipset and I can't find the setting for portrait and start believe the graphics card actually doesn't support it? I've looked at the latest drivers and can see that this has changed. What are my options? Can I buy some sort of external graphics thingy or other possible solutions will get up votes! ;)

  Read the article

• 10 gigabit or 1 gigabit switch

  - by Guntis

  We are planning to move mysql to dedicated box. At this moment we have web servers and mysql is running on each. Question is: cheaper is to buy 10G switch and put 10G network card into mysql server. Or buy normal gigabit switch and connect mysql box to switch with multiple network cables. In 1G scenario then we give each web server different mysql IP address. I don't think, that mysql box with one 1G link is enough to to satisfy multiple web box mysql traffic. At this moment we have 3 servers witch are running mysql/web. Plan is to add fourth server for mysql only. Thanks. Edit: if we buy 1G switch with mini-GBIC ports. Can we put in mini-GBIC 10G connectors and then connect mysql box to that port?

  Read the article

• Secondary Monitor won't Display at Full Resolution with Primary Display Disconnected

  - by Laramie

  I have had a bad day. Among today's events, the LCD display on my Dell E6500 notebook failed. It had been working with a secondary monitor connected through a VGA cable at 1600x900 resolution until I removed the LCD from my notebook for repair. Now the max resolution available on the secondary display is 1024x768. If I reconnect the burned out primary display, the secondary monitor is again available at 1600x900. The video card is an onboard Mobil Intel 4. How can I maintain the secondary display at 1600x900 with the primary display disconnected (for repair)? Edit: I just noticed that when Windows boots, it displays at the correct resolution and I can see my desktop in all its glory for a couple seconds then reverts to 1024x768.

  Read the article

• GNOME Screensaver Widgets

  - by darkfalcon

  Is there a way to add widgets to a Gnome screensaver? I think this can be done with KDE 4, but I've never liked KDE very much. I'm a programmer and comfortable with writing code if needed. I'd like to be able to: See the weather and forecast Control Rhythmbox Use a flash card widget for reviewing musical concepts The reason I want these on the screensaver is that I have login restrictions. I would like to be able to do a very limited subset of activities without having to log in.

  Read the article

• MPEG2-TS streaming: UDP or RTP?

  - by Juan Jose Polanco Arias

  Hello I'm working on an IPTV streaming server in Linux (Ubuntu Server 12.04 LTS) that has a DVB-S/S2 card to obtain satellite channels. Then with MuMuDVB I map all channels in the transponder to a multicast group, for multicast transmission. Now for the MuMuDVB software I can either use UDP for transmission or I can add the RTP header. I was wondering what would be the most convenient for MPEG2-TS because I've heard that RTP is used primarily for MPEG4, but It's also said that RTP can be used for MPEG2-TS. Thanks for your help.

  Read the article

• BSOD on windows 7 with SSD during boot after improper shutdown

  - by Bob

  I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• How can I make my monitor run at it's native resolution under Kubuntu 9.10?

  - by Adam Matan

  Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

  Read the article

• USB cable model for Kodak EasyShare Z740

  - by Robert Munteanu

  I've lost the original USB cable for my Kodak EasyShare Z740, and I can't figure out which model I should replace it with. I did not find the original parts, as the camera is pretty old. I did find the cable on the Kodak site, but I I've tried both mini-USB and micro-USB and neither fit. Alternatively, bonus points for pointing out a dealer in Bucharest, Romania which has the original part. N.B. I do use a card reader now, but I find it more convenient to use the cable.

  Read the article

• My PC becomes very slow after changing page file in XP.

  - by Jane

  Hello there, I have 5 partitions in my computer (C, D, E, F, G), and C: is the system partition. Recently I changed the page file setting to use 768-768 MB from the G:, without changing the C: default value (256-512 MB). Everything runs fine until I rebooted my PC. I unset the G:'s page file before I rebooted my PC. Well, after I rebooted my PC, my XP becomes VERY slow. damn slow. I don't know how long I wasted to wait for the boot screen to disappear. (Well, maybe about 1-3 mins. Normally it is under 10 secs) and when I tried to enter the desktop, it just like using a computer without a VGA card, or VGA driver installed. Very slow. Any suggestions to fix this problem? Because I hate to repair-install my XP =\ Thanks.

  Read the article

• Input not supported message when monitor is powered off then back on

  - by Jason Down

  I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

  Read the article

• How to get Atheros ar242x wireless adapter working under Debian Linux?

  - by Mark

  Does anybody know how to get the Atheros ar242x wireless adapter working under Debian Linux (5.0.2 and/or 5.0.3)? My Debian live CDs and install CDs both don't like this card at all. Curisouly, it seems to work on other, Debian-based, Linuxes. Is this a free/non-free Driver issue? I know Debian gets mardy about that. Although for what it's worth, the Live CD doesn't seem to detect my wired LAN connection either... Specifically this is on a Samsung R610 laptop (some version of which seem to have an intel wireless adapter - this one definitely doesn't!) I've tried all sorts of things but obviously on a live CD installing software is limited. I've also tinkerering with network config files and kernel modules etc but to no avail.

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >