Search Results

Search found 55692 results on 2228 pages for 'error logging'.

Page 156/2228 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• C++ Windows Forms application unhandled exception error when textbox empty

  - by cmorris1441

  I'm building a temperature conversion application in Visual Studio for a C++ course. It's a Windows Forms application and the code that I've written is below. There's other code to of course, but I'm not sure you need it to help me. My problem is, when I run the application if I don't have anything entered into either the txtFahrenheit or txtCelsius2 textboxes I get the following error: "An unhandled exception of type 'System.FormatException' occurred in mscorlib.dll" The application only works right now when a number is entered into both of the textboxes. I was told to try and use this: Double::TryParse() but I'm brand new to C++ and can't figure out how to use it, even after checking the MSDN library. Here's my code: private: System::Void btnFtoC_Click(System::Object^ sender, System::EventArgs^ e) { // Convert the input in the Fahrenheit textbox to a double datatype named fahrenheit for manipulation double fahrenheit = Convert::ToDouble(txtFahrenheit->Text); // Set the result string to F * (5/9) -32 double result = fahrenheit * .5556 - 32; // Set the Celsius text box to display the result string txtCelsius->Text = result.ToString(); } private: System::Void btnCtoF_Click(System::Object^ sender, System::EventArgs^ e) { // Convert the input in the Celsius textbox to a double datatype name celsius for manipulation double celsius = Convert::ToDouble(txtCelsius2->Text); // Set the result2 string to C * (9/5) + 32 double result2 = celsius * 1.8 + 32; // Set the Fahrenheit text box to display the result2 string txtFahrenheit2->Text = result2.ToString(); }

  Read the article

• backface culling error

  - by acrilige

  I write simple software renderer. In my pipeline i have stage of backface culling. But looks like it has some error (see picture). I perform culling right after world transformation. (i can't insert picture in post coz i don't have enough points, so i just upload it (cube model): http://imageshack.us/photo/my-images/705/bcerror.png/) Vector3F view_dir(0.0f, 0.0f, 1.0f); std::vector<Triangle> to_remove; for (Triangle &t : m_triangles) { Vector4F e1 = t.v2 - t.v1; Vector4F e2 = t.v3 - t.v1; Vector3F normal( e1.y * e2.z - e1.z * e2.y, e1.z * e2.x - e1.x * e2.z, e1.x * e2.y - e1.y * e2.x ); normal.Normalize(); float dot = Dot(view_dir, normal); if (dot <= 0) to_remove.push_back(t); } for (Triangle& t : to_remove) m_triangles.erase(std::remove(m_triangles.begin(), m_triangles.end(), t), m_triangles.end()); Camera sits in origin and points in screen (RH). What is the reason?

  Read the article

• Outlook macro runs through 250 iterations before failing with error [migrated]

  - by Senoculus

  Description: I have an Outlook macro that loops through selected emails in a folder and writes down some info to a .csv file. It works perfectly up until 250 before failing. Here is some of the code: Open strSaveAsFilename For Append As #1 CountVar = 0 For Each objItem In Application.ActiveExplorer.Selection DoEvents If objItem.VotingResponse <> "" Then CountVar = CountVar + 1 Debug.Print " " & CountVar & ". " & objItem.SenderName Print #1, & objItem.SenderName & "," & objItem.VotingResponse Else CountVar = CountVar + 1 Debug.Print " " & CountVar & ". " & "Moving email from: " & Chr(34) & objItem.SenderName & Chr(34) & " to: Special Cases sub-folder" objItem.Move CurrentFolderVar.Folders("Special Cases") End If Next Close #1 Problem After this code runs through 250 emails, the following screenshot pops up: http://i.stack.imgur.com/yt9P8.jpg I've tried adding a "wait" function to give the server a rest so that I'm not querying it so quickly, but I get the same error at the same point.

  Read the article

• Dependency error while installing WINE

  - by pgrytdal

  Every time I try to install "WINE" VIA the Software Center on Ubuntu 12.10, I get this error: The following packages have unmet dependencies: wine1.4: PreDepends: dpkg (>= 1.15.7.2~) but 1.16.7ubuntu6 is to be installed Depends: libc6 (>= 2.14) but 2.15-0ubuntu20 is to be installed Depends: wine1.4-amd64 (= 1.4.1-0ubuntu1) but 1.4.1-0ubuntu1 is to be installed Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) but it is not going to be installed When I try installing it VIA the terminal, this is what I get: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) but it is not installable Recommends: gnome-exe-thumbnailer but it is not going to be installed or kde-runtime but it is not going to be installed Recommends: ttf-droid Recommends: ttf-mscorefonts-installer but it is not going to be installed Recommends: ttf-umefont but it is not going to be installed Recommends: ttf-unfonts-core but it is not going to be installed Recommends: winbind but it is not going to be installed Recommends: winetricks but it is not going to be installed E: Unable to correct problems, you have held broken packages. how do I fix this?

  Read the article

• getting the following error in installing qt creator through software center

  - by I'll sudeepdino008

  getting the following error in installing qt creator through software center. The following packages have unmet dependencies: qtcreator: Depends: libqt4-help (>= 4:4.7.1) but 4:4.8.1-0ubuntu4 is to be installed Depends: libc6 (>= 2.15) but 2.15-0ubuntu10.2 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.6.3-1ubuntu5 is to be installed Depends: libqt4-declarative (>= 4:4.7.4) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqt4-designer (>= 4:4.7.1) but 4:4.8.1-0ubuntu4 is to be installed Depends: libqt4-network (>= 4:4.7.1) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqt4-script (>= 4:4.7.1) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqt4-sql (>= 4:4.7.1) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqt4-svg (>= 4:4.7.1) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqt4-xml (>= 4:4.7.1) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqtcore4 (>= 4:4.8.0) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libqtgui4 (>= 4:4.8.0) but 4:4.8.1-0ubuntu4.2 is to be installed Depends: libstdc++6 (>= 4.4.0) but 4.6.3-1ubuntu5 is to be installed

  Read the article

• ubuntu 10.04: boot error for custom compiled kernel - gave up wating for root device

  - by atharva

  Hi, I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platoform) and it is working fine. Now I have compiled kernel 2.6.37 from the downloaded from the kernel tree. I followed usual procedure of compileing kernel (make menuconfig,make. make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using upadate grub command. Update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different ubuntu forums: 1. disable uuid and point root=/dev/sda8 (sda8 is where my kernele image resides (both default kernel and compiled one) from /etc/default/grub 2. compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution ?

  Read the article

• SharePoint 2007 Enabling Incoming Email Error

  - by Cherie Riesberg

  Symptom: When configuring incoming e-mail, the e-mails come through just fine if the server name is in the e-mail address: [email protected] but when you change it to a vanity name [email protected], the message is bounced back and you get this error: Delivery has failed to these recipients or distribution lists: [email protected] Your message wasn't delivered because of security policies. Microsoft Exchange will not try to redeliver this  message for you.    Please provide the following diagnostic text to your system administrator. The following organization rejected your message: servername01.fqdn.com.   Problem: The SharePoint server relay rejects the message because it doesn't recognize the name.  You have set it up in Exchange, but you need to set up an alias in the SMTP service on the SharePoint server;   Solution: Configure an Alias Domain An alias domain is an alias of the default domain. You can set up alias domains that use the same settings as the default domain. Messages that are received by the SMTP Service for an alias domain are placed in the Drop folder that is designated for the default domain. To configure an alias domain, follow these steps: Start IIS Manager or open the IIS snap-in. Expand Server_name, where Server_name is the name of the server, and then expand the SMTP virtual server that you want (for example, Default SMTP Virtual Server). Right-click Domains, point to New, and then click Domain. The New SMTP Domain Wizard starts. Click Alias, and then click Next. Type a name for the alias domain in the Name box, and then click Finish. Quit IIS Manager or close the IIS snap-in.

  Read the article

• I cannot boot Ubuntu from WUBI install with windows 7, get an error message every time

  - by Tom

  i have tried several times to install ubuntu using wubi, i can't use a disc as i have a notebook computer and there is no optical drive. the download and installation all seem to work well but whenever i try to boot ubuntu at the windows 7/ubuntu menu it comes up with this error screen. I have used both the C: drive and the D: drive to install Ubuntu several times each, it's always unsuccessful. "Windows has failed to start. a recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer Choose your language settings and then click 'next' Click repair your computer. If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr Status: 0xc000000F Info: The selected entry could not be loaded because the application is missing or corrupt." I use an ASUS x501a with windows 7. What do i do to fix this? I want to be able to dual boot Windows 7 and ubuntu. Thanks a lot :)

  Read the article

• Ubuntu 10.04: boot error for custom compiled kernel - gave up waiting for root device

  - by atharva

  I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platform) and it is working fine. Now I have compiled kernel 2.6.37 downloaded from the kernel tree. I followed usual procedure of compiling kernel (make menuconfig, make, make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using update-grub command. update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different Ubuntu forums: disable uuid and point root=/dev/sda8 (sda8 is where my kernel image resides (both default kernel and compiled one) from /etc/default/grub compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution?

  Read the article

• Error on /home prevents OS boot

  - by mdrg

  Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

  Read the article

• Software Error Basics

  Software Error Basics Who Causes Errors?   Software errors are caused by: ·    End-users ·    Programmers ·    Computer Systems   What Causes Errors?   Software errors are caused by: ·    Programmer Mistakes and Assumptions ·    Invalid data ·    Unexpected User Interactions ·    Missing Resources o  Files o  Databases o  Network Connectivity ·    Poor network connection ·    Insufficient Permissions   Where Do Errors Occur?   Software errors can occur anywhere code is executed:   ·    Desktop PC ·    Laptop PC ·    Server ·    Tablet PC ·    Mobile Phone ·    Any Device that can execute software   When Do Errors Occur?   Software errors occur when source code is being compiled (Compile-Time) or executed (Run-Time).  

  Read the article

• Warning and error information in stored procedures revisited

  - by user13334359

  Originally way to handle warnings and errors in MySQL stored routine was designed as follows: if warning was generated during stored routine execution which has a handler for such a warning/error, MySQL remembered the handler, ignored the warning and continued execution after routine is executed MySQL checked if there is a remembered handler and activated if any This logic was not ideal and causes several problems, particularly: it was not possible to choose right handler for an instruction which generated several warnings or errors, because only first one was chosen handling conditions in current scope messed with conditions in different there were no generated warning/errors in Diagnostic Area that is against SQL Standard. First try to fix this was done in version 5.5. Patch left Diagnostic Area intact after stored routine execution, but cleared it in the beginning of each statement which can generate warnings or to work with tables. Diagnostic Area checked after stored routine execution.This patch solved issue with order of condition handlers, but lead to new issues. Most popular was that outer stored routine could see warnings which should be already handled by handler inside inner stored routine, although latest has handler. I even had to wrote a blog post about it.And now I am happy to announce this behaviour changed third time.Since version 5.6 Diagnostic Area cleared after instruction leaves its handler.This lead to that only one handler will see condition it is supposed to proceed and in proper order. All past problems are solved.I am happy that my old blog post describing weird behaviour in version 5.5 is not true any more.

  Read the article

• EXC_BAD_ACCESS error when box2d joint is destroyed

  - by colilo

  When I destroy the weldJoint in the update method (see below) I get an EXC_BAD_ACCESS error pointing to the line world->DestroyJoint(weldJoint); in the update method below: -(void) update: (ccTime) dt { int32 velocityIterations = 8; int32 positionIterations = 1; // Instruct the world to perform a single step of simulation. It is // generally best to keep the time step and iterations fixed. world->Step(dt, velocityIterations, positionIterations); // using the iterator pos over the set std::set<BodyPair *>::iterator pos; for(pos = bodiesForJoints.begin(); pos != bodiesForJoints.end(); ++pos) { b2WeldJointDef weldJointDef; BodyPair *bodyPair = *pos; b2Body *bodyA = bodyPair->bodyA; b2Body *bodyB = bodyPair->bodyB; weldJointDef.Initialize(bodyA, bodyB, bodyA->GetWorldCenter()); weldJointDef.collideConnected = false; weldJoint = (b2WeldJoint*) world->CreateJoint(&weldJointDef); // Free the structure we allocated earlier. free(bodyPair); // Remove the entry from the set. bodiesForJoints.erase(pos); } for(b2Body *b = world->GetBodyList(); b; b=b->GetNext()) { if (b->GetUserData() != NULL) { CCSprite *mainSprite = (CCSprite*)b->GetUserData(); if (mainSprite.tag == 1) { mainSprite.position = CGPointMake( b->GetPosition().x * PTM_RATIO, b->GetPosition().y * PTM_RATIO); CGPoint mainSpritePosition = mainSprite.position; if (mainSprite.isMoved) { world->DestroyJoint(weldJoint); } } } } } In the HelloWorldLayer.h I set the weldJoint with the assign property. Am I destroying the joint in the wrong way? I would really appreciate any help. Thanks

  Read the article

• MWE function error message saying "use of undeclared indentifier" [migrated]

  - by nimbus

  I'm unsure about how to make MWE with Objective C, so if you need anything else let me know. I am trying running through a tutorial on building an iPhone app and have gotten stuck defining a function. I keep getting an error message saying "use of undeclared indentifier". However I believe I have initiated the function. In the view controller I have: if (scrollAmount > 0) { moveViewUp = YES; [scrollTheView:YES]; } else{ moveViewUp = NO; } with the function under it - (void)scrollTheView:(BOOL)movedUp { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.3]; CGRect rect = self.view.frame; if (movedUp){ rect.origin.y -= scrollAmount; } else { rect.origin.y += scrollAmount; } self.view.frame = rect; [UIView commitAnimations]; } I have initiated the function in the header file (that I have imported). - (void)scrollTheView:(BOOL)movedUp;

  Read the article

• "drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]" during install

  - by Warez J. Coxtrong

  I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive. When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine. But as soon as I'm done with all that the next screen goes black and displays this message: drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6] Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly? I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap. I have checked the MD5sum of install image file and it all matches up. d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso

  Read the article

• Why Hebrew letters in the address bar break the ARR gateway (Only With Explorer 8,9,10)?

  - by Noamway

  The ARR is working great in all browsers except Internet Explorer 8,9,10. When I paste Hebrew URL directly to the address bar it's working good, but when I surf (click on a simple href URL) from one Hebrew URL page to another Hebrew URL the ARR return me that error: "502 - Web server received an invalid response while acting as a gateway or proxy server." There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. I checked it number of times including with HTTP analyzer and I saw that the "referer" is making all the problems and cause to that error. For example when I enter to that page: mydomain.com/somehebrewchars (mydomain.com/???? you will need Hebrew install) And click in the page on a link to: mydomain.com/somehebrewchars2 (mydomain.com/???????? you will need Hebrew install) I will get the error above and when you look at the referrer you will see something like that: mydomain.com/עמוד-× ×—×™×ª×” We use other proxies application to others projects and we don't have the same issue like that. For this example we used WIN 2008 and 2012 with ARR 2.5 and also 3 beta. Any help is welcome :-) Thanks, Noam

  Read the article

• PHP unable to load dynamic library... but it is loaded. WTF?

  - by Josh

  I have a CentOS 5.4 server with Apache 2.2.3, mod_fastcgi and PHP 5.2.11. Everything is working great, server is a production server and I've had no complaints. When I was looking in PHP's error log to diagnose a problem with a specific page, I saw the following periodically repeated over and over: [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/apc.so' - /usr/lib/php/modules/apc.so: undefined symbol: php_rfc1867_callback in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pdo_mysql.so' - /usr/lib/php/modules/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/apc.so' - /usr/lib/php/modules/apc.so: undefined symbol: php_rfc1867_callback in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pdo_mysql.so' - /usr/lib/php/modules/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0 I am very confused because APC is loaded, I can see it in the output of phpinfo(). And by the look of these error messages nothing should be working at all. Yet sites seem to be running fine. How can I track down the source of this error?

  Read the article

• Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace

  - by Nick

  I have an laptop top hard drive I was trying to use to my new media computer. The case is small and can accommodate for 2 2.5" drives, no 3.5" drives. I had been using the hard drive as storage hard drive until now. When I go to install Windows on the hard drive first I'm prompted at the bios of: Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace. And then again in the Windows Setup, informing me that the hard drive is bad. So I did a full format of the drive and tried again. Same error. So I took it out and hooked it back up to my other computer via an Sata usb adapter kit (maybe the cause?). The hard drive is recognized fine and when I scanned it for errors by going: right click -> properties -> tools -> error checking It returns that the hard drive is fine. I have tried 3 different SATA cables and multiple jumpers. When I plugged in my 1.5 tb 3.5" drive the computer that gives me the S.M.A.R.T. error on the 2.5" drive, recognizes it with no problems. Any ideas on why this is happening and how I can fix it?

  Read the article

• Can't pop3 from exchange server after a reboot

  - by BLAKE

  Last night I shutdown my Exchange 2003 Virtual Machine, I added a new VHD (For backups), and booted it again. Now I can't POP3 email from it with Outlook 2007. In Outlook I get the error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' Does anybody know what is wrong? All I did was a reboot. I haven't formated the added disk. There are no weird errors in the event log. I can still send mail with Outlook over port 25. I can send and recieve mail with OWA. I can POP3 the mail to my phone (it take about 15 minutes after sending a message, but I do get it eventually). EDIT: The 'Microsoft Exchange POP3' Service says that it is started but if I stop it and try to start it again, it fails saying 'Could not start the Microsoft Exchange POP3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion.' I did some googling and someone on exchangefreaks.com said that if I use task manager to 'End Task' on inetinfo.exe, then I can start the POP3 service fine. Does anyone know what causes this problem? I am fine for now since I did get the Service started, but If it does this after every reboot...

  Read the article

• another "SSH connect to host github.com port 22: Bad file number"

  - by Mariusz

  Hello. I have a problem with my first-time ssh connection. Yes, I've already done yours guides, already tried your "Dealing with firewalls and proxies" article and the problem is still occuring. I am using Win7 32bit, Windows Firewall is disabled, haven't any third-party firewalls, ESET Nod32 Antivirus is not blocking any ports, I am not using any PROXY (neither local proxy) . Here goes the logs: Ordinary SSH connection try C:\Users\Mariusz>ssh -vvv [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug2: ssh_connect: needpriv 0 debug1: Connecting to github.com [207.97.227.239] port 22. debug1: connect to address 207.97.227.239 port 22: Not owner ssh: connect to host github.com port 22: Bad file number NCAT connection try C:\Users\Mariusz>ncat github.com 22 Strange connect error from 207.97.227.239 (10013): No error 10013 = WSAEACCES I think that method called "smart-http-support" won't be usable for me because I haven't created repo yet. I have just GIT INIT locally, and finished at step GIT PUSH, which returns the same: ssh: connect to host github.com port 22: Bad file number fatal: The remote end hung up unexpectedly corkscrew method (first article from yours guide) . While PUTTYing (with pageant in bg), after inputing login - an error is occuring (MessageBox): Disconnected: No supported authentication methods available And in terminal such message is printing out: Server refused our key Key I have generated correctly, using ssh-keygen. I tried not method by editing ~/.ssh/config yet because I had thought that because I haven't PUSHed anything to my remote repo so I won't be able to CLONE anything. Method called ssh-forwarding is not for my, cause it "requires access to an external ssh server" and I haven't any at this time. What else could I do? Thanks in advance for any help. Mariusz.

  Read the article

• How to clone MySQL DB? Errors with CREATE VIEW/SHOW VIEW privileges

  - by user38071

  Running MySQL 5.0.32 on Debian 4.0 (Etch). I'm trying to clone a WordPress MySQL database completely (structure and data) on the same server. I tried doing a dump to a .sql file and an import into a new empty database from the command line, but the import fails with errors saying the user does not have the "SHOW VIEW" or "CREATE VIEW" privilege. Trying it with PHPMyAdmin doesn't work either. I also tried doing this with the MySQL root user (not named "root" though) and it shows an "Access Denied" error. I'm terribly confused as to where the problem is. Any pointers on cloning a MySQL DB and granting all privileges to a user account would be great (specifically for MySQL 5.0.32). The SHOW GRANTS command for the existing user works (the one who has privileges over the source database). It shows that the user has all privileges granted. I created a new user and database. Here's what I see with the grant commands. $ mysql -A -umyrootaccount --password=myrootaccountpassword mysql> grant all privileges on `newtarget_db`.* to 'newtestuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db' mysql> grant all privileges on `newtarget_db`.* to 'existingsourcedbuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db'

  Read the article

• Ubuntu hard disk getting SATA errors

  - by Henadzy

  I am getting "UNC" errors on a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount the filesystem on another computer, it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } [...snip 3 similar repeats of last 4 lines; see revision history for full log...] Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Apache httpd workers retry

  - by David Newcomb

  I have an Apache httpd web server running mod_proxy and mod_proxy_balancer. The whole of /somedir is sent to 2 worker machines which service the requests using the round robin scheduler. Each worker machine is running IIS but I don't think that is important. I can demonstrate the load balancer working by repeatedly requesting a single page which contains the IP address of the machine and can see that it switches from one to the other in a predictable round robin fashion. If I switch off one of the IIS servers and start requesting the same page then each page only contains the IP address of the machine that is up. However, if I start IIS and don't run my IIS application then /somedir returns 500 (as it should). I've added 500 to the failonstatus (Apache 2.4) so when it hits the error Apache places the worker machine into error state. Apache still returns the proxy error to the client though. How can I make Apache catch the proxy failure and retry using a different worker in the same way that a connection failure does. Update There is almost the same question asked in StackOverflow so joining them together. http://stackoverflow.com/questions/11083707/httpd-mod-proxy-balancer-failover-failonstatus-transperant-switching

  Read the article

• SQL Server Instance login issue

  - by reallyJim

  I've just brought up a new installation of SQL Server 2008. I installed the default instance as well as one named instance. I'm having a problem connecting to the named instance from anywhere besides the server itself with any user besides 'sa'. I am running in mixed mode. I have a login/user that has a known username. Using that user/login, I can properly connect when directly on the server. When I attempt to login from anywhere else, I recieve a "Login failed for user ''", with Error 18456. In the log file in the server, I see a reason that doesn't seem to help: "Reason: Could not find a login matching the name provided.". However, that user/login DOES exist, as I can use it locally. There are no further details about the error. Where can I start to find something to help me with this? I've tried deleting and recreating the user, as well as just creating a new one from scratch--same result, locally fine, remotely an error. EDIT: Partially Resolved. I'm now passed the base issue--the clients were trying to connect via the default instance. I don't know why. So, once proper ports were opened in the firewall, and a static port assigned to the named instance, I can now connect--BUT ONLY if I specify the connection as Server,Port. SQLBrowser is apparently not helping/working in this case. I've verified it IS running, and done a stop/restart after my config changes, but no difference yet.

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >