Search Results

Search found 11395 results on 456 pages for 'intel integrated graphics'.

Page 156/456 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Diagnosing PCI issues

  - by dtsazza

  I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

  Read the article

• RAID administration in Debian Lenny

  - by Siim K

  I've got an old box that I don't want to scrap yet because it's got a nice working 5-disk RAID assembly. I want to create 2 arrays: RAID 1 with 2 disks and RAID 5 with the other 3 disks. The RAID card is Intel SRCU31L. I can create the RAID 1 volume in the console that you access with Ctrl+C at startup. But it only allows for creation of one volume so I can't do anything with the 3 remaining disks. I installed Debian Lenny on the RAID 1 volume and it worked out nicely. What utilites could I now use to create/manage the RAID volumes in Debian Linux? I installed the raidutils package but get an error when trying to fetch a list: #raidutil -L controller or #raidutil -L physical # raidutil -L controller osdOpenEngine : 11/08/110-18:16:08 Fatal error, no active controller device files found. Engine connect failed: Open What could I try to get this thing working? Can you suggest any other tools? Command #lspci -vv gives me this about the controller: 00:06.1 I2O: Intel Corporation Integrated RAID (rev 02) (prog-if 01) Subsystem: Intel Corporation Device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at f9800000 (32-bit, prefetchable) [size=8M] [virtual] Expansion ROM at 30020000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: PCI_I2O Kernel modules: i2o_core

  Read the article

• Windows XP Setup Fails to Recognize USB Floppy after formatting AHCI disk

  - by Strahn

  I am attempting to install Windows XP Professional x64 onto a HP EliteBook 8540w. I have downloaded both the latest Intel Rapid Storage Technology drivers and the Intel Storage Matrix drivers that are listed on HPs website and copied the drivers over to a floppy disk (two separate floppies, one for each version of the drivers.) Booting to my WinXP Pro x64 install CD, I go through the F6 process, load the driver and am able to see my HDD, delete, create and format partitions on it. When I go to continue the install, after checking the disk, the system asks me to enter the disk labeled "Intel Rapid Storage Technology" and press enter to continue. Nothing happens at this point when I press enter. This happens if I use the latest drivers or the older drivers. We have created a slipstreamed install CD using nLite that has the AHCI drivers integrated, which installs fine. However, we have identified a number of issues with the system that I believe are side-effects of using nLite for the slipstreaming and I am attempting to verify that. I have researched this issue and found a few examples of others having the same problem, but no solution. The USB floppy is a Lacie branded floppy, connecting it to a working XP workstation shows it to be the Y-E Data USB floppy drive that is supposedly 100% compatible with XP per MS KB 916196.

  Read the article

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• What are the biggest, best CPUs that support Physical Address Extension?

  - by Giffyguy

  I'm looking for a CPU that will support PAE and fit into an LGA775 socket. This combination of technology is very much preferred for my current server hardware/software setup. My priorities in order of highest to lowest: PAE & LGA775 At least 1066Mhz FSB Largest CPU cache possible Multiple Cores if possible HyperThreading if possible Most other factors are of little-to-no consequence. I'm finding it very difficult to figure out what my options are. Intel doesn't have much useful information on PAE (since x64 is so dominant), and Wikipedia simply says that "PAE is provided by Intel Pentium Pro (and above) CPUs - including all later Pentium-series processors except the 400 MHz bus versions of the Pentium M." All of Intel's listed Pentium CPU's support Intel64, which makes me seriously doubt they will support PAE with a 32-bit OS. And Wikipedia's claim is so vague, I have no idea if they mean up-to-and-including the x64 Prescott CPUs. PAE is supposed to be an aspect of the x86 architecture, and I believe it is no longer supported in an x64 environment. Please correct me if I am wrong.

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• Asus K55VM usb 3.0 issue

  - by user2141481

  Good day superusers! I own the above laptop and I found out that there are some unknown and unusual issues with usb 3.0 ports. I haven't noticed anything strange until now. I got a new toshiba usb 3.0 external hdd and when I try to copy larger amount of data from my disk to the external hdd, the OS(windows 7) randomly starts ignoring the external hdd. It doesn't shut it down, it kinda just stops responding but the light on the hdd is still lit. I get an error that the files cannot be copied. I have reinstalled windows 7, installed all drivers(including intel chipset drivers of course) and the issue is still present. It acts normal when copying small amount of data. Also, I heard that some intel chipsets have an issue with usb, something about the connectors not transferring power when the usb device enters some kind of "low power mode" causing the device to stop responding and you need to plug it out and in again. But the thing is, my Intel® Chief River Chipset HM76 is not on the list of affected hardware(not ENTIRELY sure though). If anyone has any idea of what the problem to this might be, I'd be greatful. Edit: The hdd works perfectly fine even for large amounts of data if plugged in the usb 2.0 port!

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• Move an SSD with Windows 7 to a new PCIe SATA controller card

  - by Shevek

  This is my current setup: Abit AB9 QuadGT motherboard which has an Intel P965 chipset with Intel ICH8 SATA Rev. 2.0 controller Kingston HyperX 3K 120GB SSD which supports SATA Rev. 3.0 Windows 7 Ultimate x64 For some reason I was unable to install Windows with the controller set in AHCI mode, even with the correct driver from Intel so it is currently in IDE mode. Due to the ICH8 controller being SATA Rev 2.0 and running in IDE mode, the SSD is operating well under it's published read/write speeds. I have ordered an Asus U3S6 controller card to add both SATA Rev. 3.0 and USB 3.0 to my computer. The motherboard does have a PCIe x4 slot available so I will hopefully achieve the full potential of my SSD. My question is this - am I able to swap the SSD over to the controller card from the motherboard controller without having to clean install Windows? I am hoping that all I will need to do is ensure that the controller card drivers are available to Windows and set the registry as per this KB article. Will this work or should I perform a clean installation?

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• Building vs buying a server for an academic lab [closed]

  - by Roy

  I'm looking for advice on the classic build vs buy question. We need a new linux server to run Matlab computation on in our lab (academic). Matlab parallel computing toolbox licence allows up to 12 local workers so we are aiming at a 12 core server with 4GB memory per core (total of 48gb). The system will have an SSD for the OS and a raid-5 (4x2tb) for data. I looked around and found a (relatively) cheap vendor, Silicon Mechanics, that offers a system to our liking (specs below) for $6732. However, buying the components from newegg cost only $4464! The difference is $2268 which is 50% of the base cost. If buying from a company can be thought of as a sort of insurance, basically my premiums are of 50% of the base cost which to me sounds like a lot. Of course any downtime is bad, but the work is not "mission critical", i.e. if it takes a few days to fix it when it breaks its no the end of the world. If it takes weeks to months then its a problem. If it breaks 2-3 times in 3 years, not too bad. If it breaks every month not good. In term of build experience, I set up a linux cluster in grad school (from existing computers) and I build my home pcs but I never built a server before. The server components I'm thinking about: 1 x SUPERMICRO SYS-7046T-6F 4U Tower Server Barebone Dual LGA 1366 Intel 5520 DDR3 1333/1066/800 ($1,050) 12 x Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) ECC Unbuffered Server Memory ($420) 2 x Intel Xeon E5645 Westmere-EP 2.4GHz LGA 1366 80W Six-Core ($1,116) 4 x Seagate Constellation ES 2TB 7200 RPM SATA 6.0Gb/s 3.5" ($1,040) 1 x SAMSUNG Internal DVD Writer Black SATA ($20) 1 x Intel 520 Series 2.5" 180GB SATA III MLC SSD $300 1 x LSI LSI00281 PCI-Express 2.0 x8 MD2 Low profile SATA / SAS MegaRAID SAS 9260CV-4i Controller Card, $695

  Read the article

• Flickering dual screens in Virtual Box Ubuntu 13.10 Guest

  - by alexleonard

  I have Ubuntu 13.10 x64 installed as a guest in VirtualBox (under a Windows 8.1 host) and have the settings for the virtual machine setup to run with a monitor count of 2, 128MB video memory and 3D acceleration enabled. In my guest I have the virtual box additions installed (which allowed me to have two 1920x1080 screens). Here's a screenshot of my VM settings. My laptop is an Asus N550JV which has both Intel's HD Graphics 4600 GPU and Nvidia's GeForce GT 750M. By default though I believe the Intel GFX card is being used to render the VM. When I boot up the VM it loads perfectly on dual screens, however whenever I move the mouse from one screen to the other (I have a Dell S2340L running over a HDMI connection as a second screen) the screen flickers. I've tried a variety of settings changes in both Ubuntu and the VM settings, but cannot seem to stop this screen flicker. I also used the NVidia control panel in Windows to force the dedicated graphics card to always be used but found that the display driver sometimes crashed whilst working in the VM, resulting in my VM session being destroyed, so I figured it's better to stick with the Intel GFX as that appears to be more stable. I also tried without 3D acceleration but that was much worse, and if I ran the VM with a low amount of graphics memory it really struggled. Here's my dmesg output: http://pastebin.com/1LJuYWMj (not sure if this is helpful in this situation). I read some posts suggesting changes to /etc/X11/xorg.conf but I don't appear to have an xorg.conf file. There were also a few posts (though related to Synergy) suggesting running xset -dpms but this command doesn't appear to have had any effect for me. As an additional note, I'm finding that window drawing in the guest is a little laggy/glitchy. For example, quickly scrolling through a web page may result in parts of the viewport displaying original content. Certainly I notice drawing issues most in the web browser, but it also impacts other software with parts of the window not being drawn when, say, switching between accounts in thunderbird. Any suggestions greatly appreciated!

  Read the article

• Linux boot - stop the kernel switching to a new framebuffer mode clearing output

  - by Avio

  I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• How to disable monitor auto detection in Windows 7?

  - by Jay Yother

  I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

  Read the article

• Computer freezes after watching Youtube videos

  - by Roberts

  I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Image Management System with Different Levels of Access

  - by Jason

  I work in the graphics department for a real estate brokerage, and we deal with a lot of photos. Agents take the photos, upload them to me, I touch up and standardize the photos, then I add them to an in-house server for future use by the graphics dept. I'd like to make the "sanitized" photo files available to the agents to use when they want, but I don't want the agents poking around the graphics department's files (things get misplaced, renamed and messed up in a hurry). What would be perfect is if we could create a read-only "mirror" (correct term?) of that server that could be accessed by the agents as needed, but which wouldn't feed back into our "sanitized" file system. Edit: I'm looking for an automatic solution... manually posting the files to two separate locations seems like an inelegant solution when working digitally. Edit: I'm trying to avoid any access barriers to the public (dirty) file system (however it's finally implemented). There are 40-50 real estate agents who need to access these files, half of whom can't reliably download an email attachment.

  Read the article

• Windows 8 doesn't start up after installation

  - by Raj BD

  I have a DELL INSPIRON n5110 machine running Windows 7 Home Premium 64-bit. It has 6GB of RAM and 500 GB hard disk capable to run any Windows and Linux system. And I recently attempted to install Windows 8 in the machine. Installation goes fine and smooth until the final stage when windows is done installing and GETS DEVICES READY. When GETTNG DEVICES READY reaches about 60%, the screen goes blank with the machine running. After a while it reboots. And after the new Windows Logo with dotted circles are done showing up, the screen goes blank again (when we'd expect login screen to show up). There is not even a cursor. I can see the HARD DISK ACTIVITY LED blinking but nothing shows up in the screen. I've tried CLEAN INSTALL several times. The DVD is fine, it installed and worked well in my friends' laptop PCs. I tried installing both PRO version and ENTERPRISE version and both 32-bit and 64-bit. But the problem was same everytime. Finally, I had to reinstall Windows 7 which installed and ran without any problem. The problem, we can guess, is GRAPHICS perhaps. I have Intel SandyBridge Graphics Mobile Chipset (Intel HD Graphics 3000). But if Windows 7 and Linux distrubutions like Mint and BackTrack can run on the machine, why on earth, would Windows 8 not run?

  Read the article

• Custom JComponent not displaying in Custom JPanel

  - by Trizicus

  I've tried the add() method but nothing is displayed when I try to add Test to GraphicsTest. How should I be adding it? Can someone show me? I've included the code I'm using. import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import javax.swing.JComponent; public class Test extends JComponent { Test() { setOpaque(false); setBackground(Color.white); } @Override public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2d = (Graphics2D) g.create(); g2d.setColor(Color.red); g2d.drawString("Hello", 50, 50); g2d.dispose(); } } import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import java.awt.geom.Rectangle2D; import javax.swing.JPanel; public class GraphicsTest extends JPanel implements MouseListener { private Graphics2D g2d; private String state; private int x, y; GraphicsTest() { add(new Test()); } @Override public void paintComponent(Graphics g) { super.paintComponent(g); g2d = (Graphics2D) g; g2d.setColor(Color.BLACK); g2d.drawString("STATE: " + state, 5, 15); g2d.drawString("Mouse Position: " + x + ", " + y, 5, 30); g2d.setColor(Color.red); Rectangle2D r2d = new Rectangle2D.Double(x, y, 10, 10); g2d.draw(r2d); g2d.dispose(); } public void setState(String state) { this.state = state; } public String getState() { return state; } public void setX(int x) { this.x = x; repaint(); } public void setY(int y) { this.y = y; repaint(); } public void mouseClicked(MouseEvent e) {} public void mousePressed(MouseEvent e) {} public void mouseReleased(MouseEvent e) {} public void mouseEntered(MouseEvent e) {} public void mouseExited(MouseEvent e) {} }

  Read the article

• Solving a difficult incomplete type error

  - by ChAoS

  I get an incomplete type error when trying to compile my code. I know that it is related to includes, but my project is large and it uses several templates so I can't find which type is actually incomplete. The error message doesn't help either: Compiling: ../../../addons/ofxTableGestures/src/Graphics/objects/CursorFeedback.cpp In file included from ../../../addons/ofxTableGestures/ext/boost/fusion/include/invoke_procedure.hpp:10, from ../../../addons/ofxTableGestures/src/oscGestures/tuioApp.hpp:46, from /home/thechaos/Projectes/of_preRelease_v0061_linux_FAT/addons/../apps/OF-TangibleFramework/ofxTableGestures/src/Graphics/objects/CursorFeedback.hpp:35, from /home/thechaos/Projectes/of_preRelease_v0061_linux_FAT/addons/../apps/OF-TangibleFramework/ofxTableGestures/src/Graphics/objects/CursorFeedback.cpp:31: ../../../addons/ofxTableGestures/ext/boost/fusion/functional/invocation/invoke_procedure.hpp: In function ‘void boost::fusion::invoke_procedure(Function, const Sequence&) [with Function = void (tuio::CanBasicFingers<Graphic>::*)(long int, float, float, float, float, float), Sequence = boost::fusion::joint_view<boost::fusion::joint_view<boost::fusion::iterator_range<boost::fusion::vector_iterator<const boost::fusion::vector6<long int, float, float, float, float, float>, 0>, boost::fusion::vector_iterator<boost::fusion::vector6<long int, float, float, float, float, float>, 0> >, const boost::fusion::single_view<tuio::CanBasicFingers<Graphic>*> >, boost::fusion::iterator_range<boost::fusion::vector_iterator<boost::fusion::vector6<long int, float, float, float, float, float>, 0>, boost::fusion::vector_iterator<const boost::fusion::vector6<long int, float, float, float, float, float>, 6> > >]’: ../../../addons/ofxTableGestures/src/oscGestures/tuioApp.hpp:122: instantiated from ‘void tuio::AlternateCallback<C, M, E>::run(tuio::TEvent*) [with C = tuio::CanBasicFingers<Graphic>, M = void (tuio::CanBasicFingers<Graphic>::*)(long int, float, float, float, float, float), E = tuio::TeventBasicFingersMoveFinger]’ /home/thechaos/Projectes/of_preRelease_v0061_linux_FAT/addons/../apps/OF-TangibleFramework/ofxTableGestures/src/Graphics/objects/CursorFeedback.cpp:64: instantiated from here ../../../addons/ofxTableGestures/ext/boost/fusion/functional/invocation/invoke_procedure.hpp:88: error: incomplete type ‘boost::fusion::detail::invoke_procedure_impl<void (tuio::CanBasicFingers<Graphic>::*)(long int, float, float, float, float, float), const boost::fusion::joint_view<boost::fusion::joint_view<boost::fusion::iterator_range<boost::fusion::vector_iterator<const boost::fusion::vector6<long int, float, float, float, float, float>, 0>, boost::fusion::vector_iterator<boost::fusion::vector6<long int, float, float, float, float, float>, 0> >, const boost::fusion::single_view<tuio::CanBasicFingers<Graphic>*> >, boost::fusion::iterator_range<boost::fusion::vector_iterator<boost::fusion::vector6<long int, float, float, float, float, float>, 0>, boost::fusion::vector_iterator<const boost::fusion::vector6<long int, float, float, float, float, float>, 6> > >, 7, true, false>’ used in nested name specifier If I copy the conflictive code to a same file I can compile it. So I know that the code itself is OK, the problem is the way I instantiate it. How can I trace the origin of this error? Is there any way to get the trace of the c++ compiler and preprocessor to get more informative messages?

  Read the article

• Taking screenshot with Win32 API (C# pInvoke) not working in IIS

  - by Dillen Meijboom

  I want to take a screenshot of an external website. Currently my workflow is to start a Firefox instance with the specified URL and take a screenshot using PrintWindow in the Win32 API When I run this application in IISExpress it works fine but when I run the same application in IIS on a windows VPS it is not working (screenshot is blank). I don't know what I'm doing wrong? My code: using Newtonsoft.Json; using System; using System.Collections.Generic; using System.Diagnostics; using System.Drawing; using System.Drawing.Imaging; using System.Linq; using System.Runtime.InteropServices; using System.Security; using System.Threading; using System.Web; namespace WebTools.Web { public class RemoteScreenshot { public static Bitmap TakeScreenshot(Process process) { // may need a process Refresh before return TakeScreenshot(process.MainWindowHandle); } public static Bitmap TakeScreenshot(IntPtr handle) { RECT rc = new RECT(); GetWindowRect(handle, ref rc); Bitmap bitmap = new Bitmap(rc.right - rc.left, rc.bottom - rc.top); using (Graphics graphics = Graphics.FromImage(bitmap)) { PrintWindow(handle, graphics.GetHdc(), 0); } return bitmap; } [DllImport("user32.dll")] private static extern bool GetWindowRect(IntPtr hWnd, ref RECT rect); [DllImport("user32.dll")] private static extern bool PrintWindow(IntPtr hWnd, IntPtr hDC, int flags); [StructLayout(LayoutKind.Sequential)] private struct RECT { public int left; public int top; public int right; public int bottom; } public static void Save(string url, string file, int timeout = 0) { Process.Start(new ProcessStartInfo("C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe", url) { CreateNoWindow = false, WindowStyle = ProcessWindowStyle.Maximized }); Thread.Sleep(timeout); var bitmap = TakeScreenshot(Process.GetProcessesByName("firefox").First()); bitmap.Save(file, ImageFormat.Png); bitmap.Dispose(); Process.GetProcessesByName("firefox").First().Kill(); } } } EDIT: Running Firefox works fine because the AppPool is under another account that has the rights to execute firefox.

  Read the article

• how can we find that this processor supports how much memory?????

  - by Zia ur Rahman

  I have just started the Assembly language programming and in the first lecture our teacher told us about intel 8080 and intel 8085 and he said there was 64k memory with these processor. Now i want to know that how we find this amount of memory with specific processor, for example i have a processor 1.8 Ghz , now how i can find out the amount of memory that can be used with this processor. what i am trying to ask is tell me the method how we can find out this amount of memory?

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >