Search Results

Search found 4065 results on 163 pages for 'intel mkl'.

Page 156/163 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• QNAP (469L) with Debian: can't connect to router

  - by agtoever

  I've been running my QNAP 469L with Debian (Wheezy deb7u3) for a few months. Yesterday I upgraded the memory to 4 GB. The system boots fine, but since the upgrade, I'm not able to connect the server to my router (a TP-Link WR941ND). My configuration: The router runs a DHCP server (192.168.67.100 and up), with a preconfigured ip address for the QNAP (192.168.67.10). The router is on 192.168.67.1. As said, Debian is installed on the QNAP (which can be regarded as a normal computer). Networking hardware on the QNAP: Intel PRO/1000 Network Connection using the e1000e kernel module. This is what I have tried so far: Replace the network cable (tried 3 different cables on different router ports). Check for messages from the kernel: dmesg | grep eth. Besides the normal hardware messages I get a ADDRCONF(NETDEV_UP): eth0: link is not ready for each call to ifup. Manually restart the network sudo server networking restart Check sudo ifconfig (eth0 is up, but no ip addresses). Check the /etc/network/interfaces which has (besides the loopback device) an allow-hotplug eth0 and iface eth0 inet dhcp, which is afaik the default Debian configuration. Since the server has two ethernet ports, I checked if I'm using the right port (checked the hardware address that ifconfig reports for eth0 is the same as the hardware address that is in the preconfigured ip address for the server in the router. Do a manual sudo ifdown eth0 && sudo ifup eth0 with no results (but an extra ADDRCONF(NETDEV_UP): eth0: link is not ready in the kernel log) Do a dhcp request dhclient -v eth0: for about a minute requests are send (according to the terminal) and at the end I get a No DHCPOFFERS received. No working leases in persistent database - sleeping.. Check the router system log if DHCP requests are received. I see them for some devices (my Mac, my iPhone) but not from the QNAP. The log entry looks like: DHCPS:Recv REQUEST from 84:85:06:07:75:6A and then a DHCPS:Send ACK to 192.168.67.101. There are no records from the QNAP's hardware address. So the two error messages that I do get are: ADDRCONF(NETDEV_UP): eth0: link is not ready for every ifup and No DHCPOFFERS received. No working leases in persistent database - sleeping. for every DHCP call.

  Read the article

• How to prevent dual booted OSes from damaging each other?

  - by user1252434

  For better compatibility and performance in games I'm thinking about installing Windows additionally to Linux. I have security concerns about this, though. Note: "Windows" in the remaining text includes not only the OS but also any software running on it. Regardless of whether it comes included or is additionally installed, whether it is started intentionally or unintentionally (virus, malware). Is there an easy way to achieve the following requirements: Windows MUST NOT be able to kill my linux partition or my data disk neither single files (virus infection) nor overwriting the whole disk Windows MUST NOT be able to read data disk (- extra protection against spyware) Linux may or may not have access to the windows partition both Linux and Windows should have full access to the graphics card this rules out desktop VM solutions for gaming I want the manufacturer's windows graphics card driver Regarding Windows to be unable to destroy my linux install: this is not just the usual paranoia, that has happened to me in the past. So I don't accept "no ext4 driver" as an argument. Once bitten, twice shy. And even if destruction targeted at specific (linux) files is nearly impossible, there should be no way to shred the whole partition. I may accept the risk of malware breaking out of a barrier (e.g. VM) around the whole windows box, though. Currently I have a system disk (SSD) and a data disk (HDD), both SATA. I expect I have to add another disk. If i don't: even better. My CPU is a Intel Core i5, with VT-x and VT-d available, though untested. Ideas I've had so far: deactivate or hide other HDs until reboot at low level possible? can the boot loader (grub) do this for me? tiny VM layer: load windows in a VM that provides access to almost all hardware, except the HDs any ready made software solution for this? Preferably free. as I said: the main problem seems to be to provide full access to the graphics card hardware switch to cut power to disks commercial products expensive and lots of warnings against cheap home built solutions preferably all three hard disks with one switch (one push) mobile racks - won't wear of daily swapping be a problem?

  Read the article

• Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

  - by gkb0986

  I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

  Read the article

• Synergy 1.5 crash (OSX 10.6.8)

  - by Oliver

  THANKS FOR TAKING THE TIME TO READ THIS I recently installed Synergy 1.5 r2278 (for Mac OSX 10.6.8) and was using it fine for most of the day, then it decided to stop working (the only thing I changed systemwise was the screensaver - and then after it started crashing disabled it - to see if it would resolve). When I start Synergy (on the Mac - Client) it says: after about 5 seconds (and successfully connecting to the Server) "synergyc quit unexpectedly" Here is the crash log (w/ binery info removed - too long for post requirements) Process: synergyc [1026] Path: /Applications/Synergy.app/Contents/MacOS/synergyc Identifier: synergy Version: ??? (???) Code Type: X86 (Native) Parent Process: Synergy [1023] Date/Time: 2014-05-28 15:36:17.746 +0930 OS Version: Mac OS X 10.6.8 (10K549) Report Version: 6 Interval Since Last Report: 2144189 sec Crashes Since Last Report: 23 Per-App Interval Since Last Report: 10242 sec Per-App Crashes Since Last Report: 9 Anonymous UUID: 86D5A57C-13D4-470E-AC72-48ACDDDE5EB0 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 5 Application Specific Information: abort() called Thread 0: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x95cf3afa mach_msg_trap + 10 1 libSystem.B.dylib 0x95cf4267 mach_msg + 68 2 com.apple.CoreFoundation 0x95af02df __CFRunLoopRun + 2079 3 com.apple.CoreFoundation 0x95aef3c4 CFRunLoopRunSpecific + 452 4 com.apple.CoreFoundation 0x95aef1f1 CFRunLoopRunInMode + 97 5 com.apple.HIToolbox 0x93654e04 RunCurrentEventLoopInMode + 392 6 com.apple.HIToolbox 0x93654bb9 ReceiveNextEventCommon + 354 7 com.apple.HIToolbox 0x937dd137 ReceiveNextEvent + 83 8 synergyc 0x000356d0 COSXEventQueueBuffer::waitForEvent(double) + 48 9 synergyc 0x00010dd5 CEventQueue::getEvent(CEvent&, double) + 325 10 synergyc 0x00011fb0 CEventQueue::loop() + 272 11 synergyc 0x00044eb6 CClientApp::mainLoop() + 134 12 synergyc 0x0005c509 standardStartupStatic(int, char**) + 41 13 synergyc 0x000448a9 CClientApp::runInner(int, char**, ILogOutputter*, int (*)(int, char**)) + 137 14 synergyc 0x0005c4b0 CAppUtilUnix::run(int, char**) + 64 15 synergyc 0x000427df CApp::run(int, char**) + 63 16 synergyc 0x00006e65 main + 117 17 synergyc 0x00006dd9 start + 53 Thread 1: 0 libSystem.B.dylib 0x95d607da __sigwait + 10 1 libSystem.B.dylib 0x95d607b6 sigwait$UNIX2003 + 71 2 synergyc 0x00009583 CArchMultithreadPosix::threadSignalHandler(void*) + 67 3 libSystem.B.dylib 0x95d21259 _pthread_start + 345 4 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 2: 0 libSystem.B.dylib 0x95d21aa2 __semwait_signal + 10 1 libSystem.B.dylib 0x95d2175e _pthread_cond_wait + 1191 2 libSystem.B.dylib 0x95d212b1 pthread_cond_timedwait$UNIX2003 + 72 3 synergyc 0x00009476 CArchMultithreadPosix::waitCondVar(CArchCondImpl*, CArchMutexImpl*, double) + 150 4 synergyc 0x0002b18f CCondVarBase::wait(double) const + 63 5 synergyc 0x0002ce68 CSocketMultiplexer::serviceThread(void*) + 136 6 synergyc 0x0002d698 TMethodJob<CSocketMultiplexer>::run() + 40 7 synergyc 0x0002b8f4 CThread::threadFunc(void*) + 132 8 synergyc 0x00008f30 CArchMultithreadPosix::doThreadFunc(CArchThreadImpl*) + 80 9 synergyc 0x0000902a CArchMultithreadPosix::threadFunc(void*) + 74 10 libSystem.B.dylib 0x95d21259 _pthread_start + 345 11 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 3: Dispatch queue: com.apple.libdispatch-manager 0 libSystem.B.dylib 0x95d1a382 kevent + 10 1 libSystem.B.dylib 0x95d1aa9c _dispatch_mgr_invoke + 215 2 libSystem.B.dylib 0x95d19f59 _dispatch_queue_invoke + 163 3 libSystem.B.dylib 0x95d19cfe _dispatch_worker_thread2 + 240 4 libSystem.B.dylib 0x95d19781 _pthread_wqthread + 390 5 libSystem.B.dylib 0x95d195c6 start_wqthread + 30 Thread 4: 0 libSystem.B.dylib 0x95d19412 __workq_kernreturn + 10 1 libSystem.B.dylib 0x95d199a8 _pthread_wqthread + 941 2 libSystem.B.dylib 0x95d195c6 start_wqthread + 30 Thread 5 Crashed: 0 libSystem.B.dylib 0x95d610ee __semwait_signal_nocancel + 10 1 libSystem.B.dylib 0x95d60fd2 nanosleep$NOCANCEL$UNIX2003 + 166 2 libSystem.B.dylib 0x95ddbfb2 usleep$NOCANCEL$UNIX2003 + 61 3 libSystem.B.dylib 0x95dfd6f0 abort + 105 4 libSystem.B.dylib 0x95d79b1b _Unwind_Resume + 59 5 synergyc 0x00008fd1 CArchMultithreadPosix::doThreadFunc(CArchThreadImpl*) + 241 6 synergyc 0x0000902a CArchMultithreadPosix::threadFunc(void*) + 74 7 libSystem.B.dylib 0x95d21259 _pthread_start + 345 8 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 5 crashed with X86 Thread State (32-bit): eax: 0x0000003c ebx: 0x95d60f39 ecx: 0xb0288a7c edx: 0x95d610ee edi: 0x00521950 esi: 0xb0288ad8 ebp: 0xb0288ab8 esp: 0xb0288a7c ss: 0x0000001f efl: 0x00000247 eip: 0x95d610ee cs: 0x00000007 ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037 cr2: 0x002fe000 Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB

  Read the article

• Computer randomly reboots during "intensive activity".

  - by Reznor

  My friend has been playing games on his new build for some time now. However, lately, his computer will randomly reboot out of nowhere, so far only happening in game, and presumably only to happen in game as it happens nowhere else. This can happen in game during play or even in the options. Note, it isn't a crash or blue screen. It's just a normal reboot. This started today, I believe, and has only occured in two games: Dead Space and Stalker: Shadow of Chernobyl. He has played a handful of games before these, for about a week or so, without this problem. We theorized on two possibilities: Maybe something is overheating? Maybe the power supply is inadequate? These two were quickly dismissed, as all his components were operating at normal temperatures when he got back to his desktop from the reboot, and we all know these parts don't exactly cool down quickly, especially if they get hot enough to trigger a reboot. Besides, I know at-least my motherboard reports processor overheating at start-up, and requests I press f1 to continue into boot. The PSU one was dismissed too. He has an 850w power supply on a rig that was estimated to take only 720 some watts, that's with some overcompensating to be safe. He opened up his case to make sure nothing was seated wrong or in the way. All was fine, but he did notice a sticker on his video card. It had a giant barcode on it and some numbers. Now, I'm used to seeing these stickers, they're the warranty stickers, right, and removal voids the warranty? Yeah, well, we find it odd because this sticker is slapped right over the circuits of the video card, not on a block or anything. Is this normal? Should he remove it? Right now, I am concerned with the memory. Could that be at fault? Here are his specs: Windows 7 Home Premium, 64-Bit Intel i7 950 EVGA GeForce 570 GTX 4 GB DDR3 PC10666 dual-channel Corsair RAM Corsair 850w PSU Gigabyte GA-X58A-UD3R Western Digital 1 TB WD1001FALS

  Read the article

• Internet Pings but Does Not Load

  - by t3techcom18

  From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

  Read the article

• What server setup for a small web development company? [closed]

  - by Giordano

  I co-own a company with a friend of mine and we have decided to buy a new server to support our business (our current server is an Asus EEE Box, working great but too limited :) ). I should mention that we are web developers but occasionally we do small-office sys admin. Thus, 99% of time we work on GNU/Linux (mainly Ubuntu) but from time to time we need to setup a Windows environment to assist some customers (e.g. setup a temporary SQL Server 2008). Our requirements: Low budget: we don't want the cheapest solution out there but we can't afford to spend too much. Budget could be ~1000-1500€ (before VAT) Robustness: we would like to setup a RAID array and maybe have an external disk where we can store backups Virtualization: we need to be able to setup few servers for development. The scenario is something like this (~8 appliances running in parallel): Redmine + GIT server Bacula server FTP server 3-4 virtual appliances that could be set up on demand to test our applications or support a customer. The appliances could be: LAMP, Tomcat+PostgreSQL, SQL Server Support: if something breaks down it shouldn't be too difficult to find a replacement. Now, given the main requirements, there are some doubts we need to clarify: Do you suggest to buy a prepackaged solution (for example a customized Dell PowerEdge T110 or T310) or to assemble the server by ourselves (buy the separate components)? What RAID configuration do you suggest? I was thinking of RAID1 (probably cheaper) or RAID5. should we buy a hardware RAID controller or is it ok to use a software RAID (mdadm)? In case, which controller do you suggest? What processor do you suggest (Intel Xeon, i3, i5, i7, AMD)? How much RAM? (I was thinking at least 8GB, ~1GB per appliance) What virtualization software do you recommend? VMWare seems to be the best choice, but what about XEN or KVM? We don't want to buy licenses at the moment so we would like to consider only free options. What OS do you recommend? We know Ubuntu, Debian, Gentoo very well (we would like to use Ubuntu Server), however it seems a lot of people goes for CentOS. Thanks in advance if you can help us with this! It's our first "serious" server so many doubts popped up :) Please feel free to add further recommendations if you have some to share ;) Have a nice day

  Read the article

• CodePlex Daily Summary for Sunday, March 07, 2010

  CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

  Read the article

• Information Indepth Newsletter - Linux Edition

  - by Paulo Folgado

  INFORMATION INDEPTH NEWSLETTERLinux Edition February 2011 Stay Connected:  NEWS Now Available: Oracle Linux 6 Get the latest release of Oracle Linux 6, which includes Unbreakable Enterprise Kernel.Download Oracle Linux 6 Read More Customers Succeed by Using Oracle Exadata with Oracle Linux Watch IT executives from Bank of America, Linkshare, and Johns Hopkins as they talk about the business challenges they faced and why they chose to use Oracle Linux along with Oracle Exadata as the solution. Watch Now Video Interview: Oracle Senior Vice President Wim Coekaerts Watch Wim Coekaerts, senior vice president, Linux and Virtualization Engineering, as he talks about use cases for Oracle VM Templates as well as the Unbreakable Enterprise Kernel for Linux.Watch Now Hot Off the Press: Migrate Your IBM AIX Environment to Oracle Linux This new white paper provides recommendations for planning and implementing the migration of applications from an IBM Power System running AIX to Oracle's Sun Fire X4800 Server with Intel Xeon 7560 Processor running Oracle Linux 5.5.Read More  Back to Top BLOGOSPHERE Just Launched: The Oracle Linux Blog Follow our new Oracle Linux blog  to hear the latest updates, product news, upcoming events, and all the latest happenings, directly from the Linux team at Oracle. Back to Top TECH DIVE NEW: Linux/Oracle Solaris CommandComparo Site from Oracle Technology NetworkThis site gives equivalent command syntax in Oracle Solaris 10 and Oracle Enterprise Linux 5 for common administrative tasks--focusing particularly on tasks that have tricky syntax or that you frequently need to double check. It acts as a quick reference for administrators who operate in these two OS environments. Free Download: Oracle Linux Release 5.6Did you know that by using Oracle Linux 5.5 or 5.6 along with the Unbreakable Enterprise Kernel, you can get all the benefits of Linux mainline kernel 2.6.32 and more, right now, without the need to reinstall or migrate to a new operating system such as RHEL6?Read Release NotesDownload Oracle Linux 5.6 LSB 4.0 Certification Completed for Oracle Linux 5.5Oracle Linux 5.5 with Unbreakable Enterprise Kernel successfully completed the LSB 4.0 certification.  Back to Top WEBCASTS Boost Your Linux Performance with Oracle's Enhancements in Infiniband and RDSRegister to hear Director of Kernel Engineering Chris Mason cover scalability and performance improvements in Linux environment. Get the Facts Oracle's Unbreakable Enterprise KernelSVP Wim Coekaerts and Senior Director Monica Kumar cover the facts about and benefits of using Unbreakable Enterprise Kernel.  View Other Webcasts on Demand   Back to Top EVENTS Collaborate 2011April 10-14 Orlando, Florida Cloud Summit Events, WorldwideVarious dates (check the city for date/time of event) Datacenter Efficiency Events WorldwideThese events include Linux and Oracle VM sessions.Various dates (check the city for date/time of event) Virtualization Events in North America Find an Oracle Event  Back to Top EDUCATION Get Oracle Linux Certified from Oracle University Oracle University offers courses in both Oracle Linux and the administration of Oracle Database on Linux.  Back to Top CUSTOMER SPOTLIGHT Pella Corporation Improves IT Performance and Efficiency with Oracle Linux and Oracle VM To improve IT performance and efficiency and lower operational costs, Pella Corporation, has standardized on Oracle VM and Oracle Linux. Read More Disney Store Deploys POS in 330 Stores and 7 Countries on Oracle Linux Disney Store is running 1,500 registers worldwide on a broad Oracle technology software stack including Oracle Database 11g, Oracle Fusion Middleware, and Oracle Linux. Read More Back to Top PARTNER SPOTLIGHT Emulex and Oracle Announce Data Integrity Features The Unbreakable Enterprise Kernel provides data integrity checking between Oracle Database applications and Emulex 8Gb/s LightPulse Fibre Channel Host Bus Adapters. Read More Dell Inc. Dell Inc. tested and validated configurations support Oracle Linux. Back to Top STAY IN TOUCH Follow @ORCL_Linux on Twitter for the latest penguin tweets Bookmark Oracle.com/Linux Read the Oracle Linux blog Back to Top  Oracle Information InDepth newsletters bring targeted news, articles, customer stories, and special offers to business people who want to find out how to streamline enterprise information management, measure results, improve business processes, and communicate a single truth to their constituents. Please send questions or comments to [email protected]. For answers to questions about subscribing, unsubscribing, and managing your Oracle e-mail communications preferences, please see the Oracle E-Mail Communications page. Copyright © 2011, Oracle Corporation and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. This document is provided for information purposes only, and the contents hereof are subject to change without notice. This document is not warranted to be error-free, nor is it subject to any other warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We specifically disclaim any liability with respect to this document, and no contractual obligations are formed either directly or indirectly by this document. This document may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without our prior written permission. 

  Read the article

• Searching for the Perfect Developer&rsquo;s Laptop.

  - by mbcrump

  I have been in the market for a new computer for several months. I set out with a budget of around $1200. I knew up front that the machine would be used for developing applications and maybe some light gaming. I kept switching between buying a laptop or a desktop but the laptop won because: With a Laptop, I can carry it everywhere and with a desktop I can’t. I searched for about 2 weeks and narrowed it down to a list of must-have’s : i7 Processor (I wasn’t going to settle for an i5 or AMD. I wanted a true Quad-core machine, not 2 dual-core fused together). 15.6” monitor SSD 128GB or Larger. – It’s almost 2011 and I don’t want an old standard HDD in this machine. 8GB of DDR3 Ram. – The more the better, right? 1GB Video Card (Prefer NVidia) – I might want to play games with this. HDMI Port – Almost a standard on new Machines. This would be used when I am on the road and want to stream Netflix to the HDTV in the Hotel room. Webcam Built-in – This would be to video chat with the wife and kids if I am on the road. 6-Cell Battery. – I’ve read that an i7 in a laptop really kills the battery. A 6-cell or 9-cell is even better. That is a pretty long list for a budget of around $1200. I searched around the internet and could not buy this machine prebuilt for under $1200. That was even with coupons and my company’s 10% Dell discount. The only way that I would get a machine like this was to buy a prebuilt and replace parts. I chose the  Lenovo Y560 on Newegg to start as my base. Below is a top-down picture of it.   Part 1: The Hardware The Specs for this machine: Color :  GrayOperating System : Windows 7 Home Premium 64-bitCPU Type : Intel Core i7-740QM(1.73GHz)Screen : 15.6" WXGAMemory Size : 4GB DDR3Hard Disk : 500GBOptical Drive : DVD±R/RWGraphics Card : ATI Mobility Radeon HD 5730Video Memory : 1GBCommunication : Gigabit LAN and WLANCard slot : 1 x Express Card/34Battery Life : Up to 3.5 hoursDimensions : 15.20" x 10.00" x 0.80" - 1.30"Weight : 5.95 lbs. This computer met most of the requirements above except that it didn’t come with an SSD or have 8GB of DDR3 Memory. So, I needed to start shopping except this time for an SSD. I asked around on twitter and other hardware forums and everyone pointed me to the Crucial C300 SSD. After checking prices of the drive, it was going to cost an extra $275 bucks and I was going from a spacious 500GB drive to 128GB. After watching some of the SSD videos on YouTube I started feeling better. Below is a pic of the Crucial C300 SSD. The second thing that I needed to upgrade was the RAM. It came with 4GB of DDR3 RAM, but it was slow. I decided to buy the Crucial 8GB (4GB x 2) Kit from Newegg. This RAM cost an extra $120 and had a CAS Latency of 7. In the end this machine delivered everything that I wanted and it cost around $1300. You are probably saying, well your budget was $1200. I have spare parts that I’m planning on selling on eBay or Anandtech.  =) If you are interested then shoot me an email and I will give you a great deal mbcrump[at]gmail[dot]com. 500GB Laptop 7200RPM HDD 4GB of DDR3 RAM (2GB x 2) faceVision HD 720p Camera – Unopened In the end my Windows Experience Rating of the SSD was 7.7 and the CPU 7.1. The max that you can get is a 7.9. Part 2: The Software I’m very lucky that I get a lot of software for free. When choosing a laptop, the OS really doesn’t matter because I would never keep the bloatware pre-installed or Windows 7 Home Premium on my main development machine. Matter of fact, as soon as I got the laptop, I immediately took out the old HDD without booting into it. After I got the SSD into the machine, I installed Windows 7 Ultimate 64-Bit. The BIOS was out of date, so I updated that to the latest version and started downloading drivers off of Lenovo’s site. I had to download the Wireless Networking Drivers to a USB-Key before I could get my machine on my wireless network. I also discovered that if the date on your computer is off then you cannot join the Windows 7 Homegroup until you fix it. I’m aware that most people like peeking into what programs other software developers use and I went ahead and listed my “essentials” of a fresh build. I am a big Silverlight guy, so naturally some of the software listed below is specific to Silverlight. You should also check out my master list of Tools and Utilities for the .NET Developer. See a killer app that I’m missing? Feel free to leave it in the comments below. My Software Essential List. CPU-Z Dropbox Everything Search Tool Expression Encoder Update Expression Studio 4 Ultimate Foxit Reader Google Chrome Infragistics NetAdvantage Ultimate Edition Keepass Microsoft Office Professional Plus 2010 Microsoft Security Essentials 2  Mindscape Silverlight Elements Notepad 2 (with shell extension) Precode Code Snippet Manager RealVNC Reflector ReSharper v5.1.1753.4 Silverlight 4 Toolkit Silverlight Spy Snagit 10 SyncFusion Reporting Controls for Silverlight Telerik Silverlight RadControls TweetDeck Virtual Clone Drive Visual Studio 2010 Feature Pack 2 Visual Studio 2010 Ultimate VS KB2403277 Update to get Feature Pack 2 to work. Windows 7 Ultimate 64-Bit Windows Live Essentials 2011 Windows Live Writer Backup. Windows Phone Development Tools That is pretty much it, I have a new laptop and am happy with the purchase. If you have any questions then feel free to leave a comment below.  Subscribe to my feed

  Read the article

• SPARC T4-4 Delivers World Record First Result on PeopleSoft Combined Benchmark

  - by Brian

  Oracle's SPARC T4-4 servers running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved World Record 18,000 concurrent users while executing a PeopleSoft Payroll batch job of 500,000 employees in 43.32 minutes and maintaining online users response time at < 2 seconds. This world record is the first to run online and batch workloads concurrently. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 35% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. This is the first three tier mixed workload (online and batch) PeopleSoft benchmark also processing PeopleSoft payroll batch workload. Performance Landscape PeopleSoft HR Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-2 (db) 18,000 0.944 0.503 43.32 64 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory 5 x 300 GB SAS internal disks 1 x 100 GB and 2 x 300 GB internal SSDs 2 x 10 Gbe HBA Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 3 x 300 GB SAS internal disks Oracle Solaris 11 11/11 Oracle Database 11g Release 2 Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 2 x 300 GB SAS internal disks 1 x 100 GB internal SSD Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two Oracle PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Management oracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle's PeopleSoft HR and Payroll combined benchmark, www.oracle.com/us/solutions/benchmark/apps-benchmark/peoplesoft-167486.html, results 09/30/2012.

  Read the article

• Microsoft TechEd 2010 - Day 2 @ Bangalore

  - by sathya

  Microsoft TechEd 2010 - Day 2 @ Bangalore Today is the day 2 @ Microsoft TechEd 2010. We had lot of technical sessions as usual there were many tracks going on side by side and I was attending the Web simplified track, Which comprised of the following sessions :   Developing a scalable Media Application using ASP.NET MVC - This was a kind of little advanced stuff. Anyways I couldn't understand much because this was not my piece of cake and I havent worked on this before ASP.Net MVC Unplugged - This was really great because this session covered from the basics of MVC showing what is Model,View and Controller and how it worked and the speaker went into the details of the same. Building RESTful Applications with the Open Data Protocol - There were some concepts explained about this from the basics on how to build RESTful Services and it went on till some advanced configurations of the same. Developing Scalable Web Applications with AppFabric Caching - This session showed about the integration of AppFabric with the .Net Web Applications. Instead of using Inproc Sessions, we can use this AppFabric as a substitute for Caching and outofProc Session Storage without writing code and doing a little bit of configurations which brings in High Scalability, performance to our applications. (But unfortunately there were no demos for this session ) Deep Dive : WCF RIA Services - This session was also an interactive one, in this the speaker presented from the basics of WCF and took a Book Store Application as a sample and explained all details concepts on linking with RIA Services   Apart from these sessions, in between there happened some small events in the breaks like Some discussions about Technology, Innovations Music Jokes Mimicry, etc. And on doing all these things, the developers were given some kool gifts / goodies like USBs, T-Shirts, etc. And today I got a chance to do the following certification : (70-562) Microsoft Certified Technology Specialist in .NET 3.5 Web Applications Since I already have an MCTS in .NET 2.0, I wanted to do an MCPD and for doing the same I was required to do an update to my MCTS with the .NET 3.5 framework and I did the same I cleared it and now am an MCTS in .NET 3.5 Web Apps And on doing this I got a T-Shirt and they gave something called Learning $ of worth 30$. And in various stalls for attending each quiz or some game or some referrals we got some Learning $ which we can redeem later based on our Total Learning $. I got 105 $ which i was able to redeem and got a Microsoft Learning BagPack, 1 free Microsoft certification offer, a laptop light and an e-learning content activated. And after all these sessions and small events, we had something called Demo Extravaganza like I mentioned yesterday. This was a great funfilled event with lot of goodies for the attendees. There were some lucky draw which enabled 2 attendees to get Netbooks (Sponsored by Intel) and 1 attendee to get X-box (Sponsored by Citrix). After Choosing the raffle in the lucky draw they kept it on a device called Microsoft Surface which is a kind of big touch screen device and on putting the raffle on that it detected the code of the attendee and said intelligently how many sessions that person has attended and if he has attended more than 5 he got a Netbook and this was coded by a guy called Imran. Apart from they showed demos on : Research by 2 Tamilnadu students from Krishna Arts and Science college, taken 1200 photographs of their college from different angles and put that up in Bing maps using silverlight and linked with Photosynth, which showed a 3d view of their college based on the photos they uploaded Reasearch by Microsoft on Panaramic HD views of the images. One young guy from Microsoft Research showed a demo of this on Srivilliputhur Andal Temple, in Tamil Nadu and its history with a panoramic view of the temple and the near by places with narration of the historical information on the same and with the videos embedded in it with high definition images which we can zoom to a very detailed level. Some Demo on a business app with Silverlight, Business Intelligence (BI) and maps integrated. It showed the sales of a particular product across locations. Some kool demos by 2 geeks who used Robots to show their development talents. 2 Robots fought with each other 2 Robots danced in sync for the A.R. Rehman song Humma Humma... A dream home project by Raman. He is currently using the same in his home too. Robots are controlling his home currently. They showed a video on this. Here are the list of activities that Robot does for him When he reads a book, robot automatically scans that and shows that image of that person in the screen (TV or comp) in front of him. It shows a wikipedia about that person. It says that person is not in linked in. do you want to add him If he sees an IPL Match news in the book and smiles it understands he is interested in that and opens a website related to that and shows the current game and the scorecard. It cooks for him It cleans the room for him whenever he leaves the house when he is doing something if some intruder comes inside his house his computer automatically switches his screen showing the video of the person coming inside. When he wakes up it automatically opens up the system, loads his mails and the news by the side, etc. Some Demos on Microsoft Pivot. This was there in livelabs but it is now available in getpivot.com its a pivoting of the pictorial data based on some categories and filters on the searches that we do. And finally on filling up some feedback forms we got T-Shirts and Microsoft Visual Studio 2010 Training Kit CDs. Whats more on TechEd??? Stay tuned!!! Will update you soon on the other happenings!! PS : I typed a lot of content for more than a hour but I pressed a backspace and it went to the previous page and all my content were lost and I was not able to retrieve the same and I typed everything again.

  Read the article

• Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

  - by sathya

  Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

  Read the article

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• How to Save Hundreds or Thousands of Dollars on Cell Phone Service

  - by Chris Hoffman

  Cell phone contracts are bad. You get a seemingly cheap phone up front, but you more than pay for the cost of the phone over two years. Prepaid phone plans are surging in North America for a reason. Prepaid phone plans will be cheaper and more flexible than traditional contracts with big carriers for many people. However much you use your phone, there’s a good chance you can save money with a prepaid service. No More Contracts Here’s how cell phone service typically works in North America: You get a subsidized phone for “free”, $99, or $199. You sign up for a two-year contract and more than pay back the cost of that phone over the length of the contract. This is similar to leasing something or purchasing it on a credit card and paying it back over two years — you spend less up front, but you’re paying more in the long run. But this isn’t the only option. You could opt for a cheaper prepaid service that doesn’t lock you into a contract. If you don’t use your phone much, you could just pay for what you use and avoid the hefty cell phone bills. If you use your phone a lot, you could get a cheaper plan, too. Now, this certainly isn’t for everyone. If you want the latest iPhone or Galaxy smartphone every two years and require a 4G data connection, prepaid services may not be for you. On the other hand, if you don’t need the latest phone, you can save money here. You can also save a huge amount of money if you don’t use your phone much. Phone Options When you choose your prepaid or contract-free service, you’ll often be able to purchase a phone from them. You’ll generally be able to find dirt-cheap dumbphones and the cheapest, slowest Android phones for not very much money. If you are able to buy a top-of-the-line smartphone, you’ll have to pay the full, unsubsidized price. That’s $649 for either an iPhone 5S or Samsung Galaxy S4. Whatever phones the service provider offers, you could always buy a phone elsewhere — for example, you could buy an unsubsidized iPhone direct from Apple and then take it to your cell phone service of choice. Most services will allow you to get a SIM card and pop it into your existing phone rather than purchasing a phone. If you can get a hand-me-down smartphone, you can often save quite a bit of money. For example, you may have a family member upgrading from an iPhone 4S to an iPhone 5S. You could take their phone to a prepaid carrier and have a nicer phone on a cheap cell phone plan. If you brought an old smartphone to a big carrier like AT&T or Verizon, they wouldn’t give you a discount on your monthly plan. You’d have to pay the same amount of money every month as if you had gotten a subsidized phone. Google’s Nexus phones are also great options for people looking to buy smartphones and pay up-front. Google’s Nexus 4 offered a modern, almost top-of-the-line Android smartphone experience at $299 or $349 when it came out last year. Google will soon be releasing the Nexus 5 and it’s expected to be priced at $349. That’s certainly a lot more than a cheap phone, but it’s a fairly high-end smartphone at almost half the price of an iPhone 5S or Galaxy S4. Nexus phones can be purchased online from Google’s Play Store. Service Options When choosing a service, you need to consider what you actually use. If you’re someone who only uses your phone rarely, you can get plans that will allow you to pay as little as a few dollars per month. If you’re someone who’s usually in range of Wi-Fi, you may not need much data at all. If you want a plan with unlimited talk, texting, and data usage, you can get it for much cheaper than you’d pay on a major carrier like AT&T. The options here range from pay-as-you-go plans, like the ones offered by T-Mobile, which allow you to put a certain amount of money in and only drain that balance when you actually use minutes, texts, or data. If you only make a few calls and send a few texts per month, you’d only pay a few bucks. On the other end, Walmart’s Straight Talk service is a popular option that offers unlimited talk, texting, and data at $45 per month. Which service is right for you depends on a lot of things, including your usage and what each network’s coverage is like in your area. You’ll want to do some research of your own before choosing a service. Prepaid services also offer you even more flexibility after you choose one. If you’re not happy or a better deal comes along, you can switch — you’re not locked into your service for two years and you won’t pay an early termination fee. Image Credit: Intel Free Press on Flickr, Jon Fingas on Flickr, John Karakatsanis on Flickr, kendalkinggroup on Flickr     

  Read the article

• Infiniband: a highperformance network fabric - Part I

  - by Karoly Vegh

  Introduction:At the OpenWorld this year I managed to chat with interesting people again - one of them answering Infiniband deepdive questions with ease by coffee turned out to be one of Oracle's IB engineers, Ted Kim, who actually actively participates in the Infiniband Trade Association and integrates Oracle solutions with this highspeed network. This is why I love attending OOW. He granted me an hour of his time to talk about IB. This post is mostly based on that tech interview.Start of the actual post: Traditionally datatransfer between servers and storage elements happens in networks with up to 10 gigabit/seconds or in SANs with up to 8 gbps fiberchannel connections. Happens. Well, data rather trickles through.But nowadays data amounts grow well over the TeraByte order of magnitude, and multisocket/multicore/multithread Servers hunger data that these transfer technologies just can't deliver fast enough, causing all CPUs of this world do one thing at the same speed - waiting for data. And once again, I/O is the bottleneck in computing. FC and Ethernet can't keep up. We have half-TB SSDs, dozens of TB RAM to store data to be modified in, but can't transfer it. Can't backup fast enough, can't replicate fast enough, can't synchronize fast enough, can't load fast enough. The bad news is, everyone is used to this, like back in the '80s everyone was used to start compile jobs and go for a coffee. Or on vacation. The good news is, there's an alternative. Not so-called "bleeding-edge" 8gbps, but (as of now) 56. Not layers of overhead, but low latency. And it is available now. It has been for a while, actually. Welcome to the world of Infiniband. Short history:Infiniband was born as a result of joint efforts of HPAQ, IBM, Intel, Sun and Microsoft. They planned to implement a next-generation I/O fabric, in the 90s. In the 2000s Infiniband (from now on: IB) was quite popular in the high-performance computing field, powering most of the top500 supercomputers. Then in the middle of the decade, Oracle realized its potential and used it as an interconnect backbone for the first Database Machine, the first Exadata. Since then, IB has been booming, Oracle utilizes and supports it in a large set of its HW products, it is the backbone of the famous Engineered Systems: Exadata, SPARC SuperCluster, Exalogic, OVCA and even the new DB backup/recovery box. You can also use it to make servers talk highspeed IP to eachother, or to a ZFS Storage Appliance. Following Oracle's lead, even IBM has jumped the wagon, and leverages IB in its PureFlex systems, their first InfiniBand Machines.IB Structural Overview: If you want to use IB in your servers, the first thing you will need is PCI cards, in IB terms Host Channel Adapters, or HCAs. Just like NICs for Ethernet, or HBAs for FC. In these you plug an IB cable, going to an IB switch providing connection to other IB HCAs. Of course you're going to need drivers for those in your OS. Yes, these are long-available for Solaris and Linux. Now, what protocols can you talk over IB? There's a range of choices. See, IB isn't accepting package loss like Ethernet does, and hence doesn't need to rely on TCP/IP as a workaround for resends. That is, you still can run IP over IB (IPoIB), and that is used in various cases for control functionality, but the datatransfer can run over more efficient protocols - like native IB. About PCI connectivity: IB cards, as you see are fast. They bring low latency, which is just as important as their bandwidth. Current IB cards run at 56 gbit/s. That is slightly more than double of the capacity of a PCI Gen2 slot (of ~25 gbit/s). And IB cards are equipped usually with two ports - that is, altogether you'd need 112 gbit/s PCI slots, to be able to utilize FDR IB cards in an active-active fashion. PCI Gen3 slots provide you with around ~50gbps. This is why the most IB cards are configured in an active-standby way if both ports are used. Once again the PCI slot is the bottleneck. Anyway, the new Oracle servers are equipped with Gen3 PCI slots, an the new IB HCAs support those too. Oracle utilizes the QDR HCAs, running at 40gbp/s brutto, which translates to a 32gbp/s net traffic due to the 10:8 signal-to-data information ratio. Consolidation techniques: Technology never stops to evolve. Mellanox is working on the 100 gbps (EDR) version already, which will be optical, since signal technology doesn't allow EDR to be copper. Also, I hear you say "100gbps? I will never use/need that much". Are you sure? Have you considered consolidation scenarios, where (for example with Oracle Virtual Network) you could consolidate your platform to a high densitiy virtualized solution providing many virtual 10gbps interfaces through that 100gbps? Technology never stops to evolve. I still remember when a 10mbps network was impressively fast. Back in those days, 16MB of RAM was a lot. Now we usually run servers with around 100.000 times more RAM. If network infrastrucure speends could grow as fast as main memory capacities, we'd have a different landscape now :) You can utilize SRIOV as well for consolidation. That is, if you run LDoms (aka Oracle VM Server for SPARC) you do not have to add physical IB cards to all your guest LDoms, and you do not need to run VIO devices through the hypervisor either (avoiding overhead). You can enable SRIOV on those IB cards, which practically virtualizes the PCI bus, and you can dedicate Physical- and Virtual Functions of the virtualized HCAs as native, physical HW devices to your guests. See Raghuram's excellent post explaining SRIOV. SRIOV for IB is supported since LDoms 3.1.  This post is getting lengthier, so I will rename it to Part I, and continue it in a second post. 

  Read the article

• HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

  - by Marek L.

  I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

  Read the article

• Unable to fix broken packages with sudo apt-get install -f

  - by Bob

  Here's my result, of sudo apt-get install -f. i have Ran it twice and got negative result. I believe there is an error at "error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English" This same statement "error in Version string, caused me three days of attempting to download version 12.04. There is a bug report concerning the quoted text as well. Is there anyway to download the version without the language packs, why would I corrupt version 11.10? Also, when attempting to download Synaptic using sudo apt-get install synaptic, I get the same error message. Again I point out the initial download problems and the same error message receipt. Thanks b0b@b0b-IC780M-A:~$ sudo apt-get install -f [sudo] password for b0b: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get upgrade install Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: linux-headers-generic software-center The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner appmenu-qt apport apport-gtk apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common checkbox checkbox-gtk command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc deja-dup desktop-file-utils dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hpijs hplip hplip-cups hplip-data indicator-datetime indicator-session indicator-sound isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libarchive1 libasound2-plugins libatk-adaptor libbind9-60 libbrasero-media3-1 libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libgconf2-4 libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgoa-1.0-0 libgrip0 libgs9 libgs9-common libgtk-3-bin libgtksourceview-3.0-0 libgtksourceview-3.0-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-zeroconf1.0-cil libnautilus-extension1 libnm-glib-vpn1 libnm-glib4 libnm-util2 libnotify0.4-cil libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libreoffice-emailmerge libreoffice-style-human libsane-hpaio libsmbclient libsnmp-base libsnmp15 libsyncdaemon-1.0-1 libt1-5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libunity-2d-private0 libunity-core-4.0-4 libunity6 libusbmuxd1 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxml2 linux-generic linux-image-generic metacity metacity-common mobile-broadband-provider-info modemmanager mousetweaks multiarch-support nautilus nautilus-data nautilus-sendto-empathy network-manager nux-tools onboard openssl pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-cups python-cupshelpers python-gobject-cairo python-httplib2 python-launchpadlib python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support tomboy totem totem-common totem-mozilla totem-plugins ttf-opensymbol ubuntu-desktop ubuntu-minimal ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch unity unity-2d unity-2d-launcher unity-2d-panel unity-2d-places unity-2d-spread unity-common unity-lens-applications unity-services update-manager update-manager-core update-notifier update-notifier-common usbmuxd vim-common vim-tiny vinagre vino xorg xserver-xorg xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xul-ext-ubufox 296 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 0 B/159 MB of archives. After this operation, 10.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y Extracting templates from packages: 100% Preconfiguring packages ... dpkg: error: parsing file '/var/lib/dpkg/available' near line 4131 package 'python-zope.interface': error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English . language-pack-en-base provides the bulk of translation data and is updated only seldom. This package provides frequent translation updates.': version string has embedded spaces E: Sub-process /usr/bin/dpkg returned an error code (2) b0b@b0b-IC780M-A:~$

  Read the article

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

  - by Charles Lamb

  We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

  Read the article

• #OOW 2012 : IaaS, Private Cloud, Multitenant Database, and X3H2M2

  - by Eric Bezille

  The title of this post is a summary of the 4 announcements made by Larry Ellison today, during the opening session of Oracle Open World 2012... To know what's behind X3H2M2, you will have to wait a little, as I will go in order, beginning with the IaaS - Infrastructure as a Service - announcement. Oracle IaaS goes Public... and Private... Starting in 2004 with Fusion development, Oracle Cloud was launch last year to provide not only SaaS Application, based on standard development, but also the underlying PaaS, required to build the specifics, and required interconnections between applications, in and outside of the Cloud. Still, to cover the end-to-end Cloud  Services spectrum, we had to provide an Infrastructure as a Service, leveraging our Servers, Storage, OS, and Virtualization Technologies, all "Engineered Together". This Cloud Infrastructure, was already available for our customers to build rapidly their own Private Cloud either on SPARC/Solaris or x86/Linux... The second announcement made today bring that proposition a big step further : for cautious customers (like Banks, or sensible industries) who would like to benefits from the Cloud value of "as a Service", but don't want their Data out in the Cloud... We propose to them to operate the same systems, Exadata, Exalogic & SuperCluster, that are providing our Public Cloud Infrastructure, behind their firewall, in a Private Cloud model. Oracle 12c Multitenant Database This is also a major announcement made today, on what's coming with Oracle Database 12c : the ability to consolidate multiple databases with no extra additional  cost especially in terms of memory needed on the server node, which is often THE consolidation limiting factor. The principle could be compare to Solaris Zones, where, you will have a Database Container, who is "owning" the memory and Database background processes, and "Pluggable" Database in this Database Container. This particular feature is a strong compelling event to evaluate rapidly Oracle Database 12c once it will be available, as this is major step forward into true Database consolidation with Multitenancy on a shared (optimized) infrastructure. X3H2M2, enabling the new Exadata X3 in-Memory Database Here we are :  X3H2M2 stands for X3 (the new version of Exadata announced also today) Heuristic Hierarchical Mass Memory, providing the capability to keep most if not all the Data in the memory cache hierarchy. Of course, this is the major software enhancement of the new X3 Exadata machine, but as this is a software, our current customers would be able to benefit from it on their existing systems by upgrading to the new release. But that' not the only thing that we did with X3, at the same time we have upgraded everything : the CPUs, adding more cores per server node (16 vs. 12, with the arrival of Intel E5 / Sandy Bridge), the memory with 512GB memory as well per node,  and the new Flash Fire card, bringing now up to 22 TB of Flash cache. All of this 4TB of RAM + 22TB of Flash being use cleverly not only for read but also for write by the X3H2M2 algorithm... making a very big difference compare to traditional storage flash extension. But what does those extra performances brings to you on an already very efficient system: double your performances compare to the fastest storage array on the market today (including flash) and divide you storage price x10 at the same time... Something to consider closely this days... Especially that we also announced the availability of a new Exadata X3-2 8th rack : a good starting point. As you have seen a major opening for this year again with true innovation. But that was not the only thing that we saw today, as before Larry's talk, Fujitsu did introduce more in deep the up coming new SPARC processor, that they are co-developing with us. And as such Andrew Mendelsohn - Senior Vice President Database Server Technologies came on stage to explain that the next step after I/O optimization for Database with Exadata, was to accelerate the Database at execution level by bringing functions in the SPARC processor silicium. All in all, to process more and more Data... The big theme of the day... and of the Oracle User Groups Conferences that were also happening today and where I had the opportunity to attend some interesting sessions on practical use cases of Big Data one in Finances and Fraud profiling and the other one on practical deployment of Oracle Exalytics for Data Analytics. In conclusion, one picture to try to size Oracle Open World ... and you can understand why, with such a rich content... and this only the first day !

  Read the article

• Why bother writing an Windows 8 app?

  - by Dennis Vroegop

  So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

  Read the article

• What's New in Oracle VM VirtualBox 4.2?

  - by Fat Bloke

  A year is a long time in the IT industry. Since the last VirtualBox feature release, which was a little over a year ago, we've seen: new releases of cool new operating systems, such as Windows 8, ChromeOS, and Mountain Lion; we've seen a myriad of new Linux releases from big Enterprise class distributions like Oracle 6.3, to accessible desktop distros like Ubuntu 12.04 and Fedora 17; and we've also seen the spec of a typical PC or laptop double in power. All of these events have influenced our new VirtualBox version which we're releasing today. Here's how... Powerful hosts  One of the trends we've seen is that as the average host platform becomes more powerful, our users are consistently running more and more vm's. Some of our users have large libraries of vm's of various vintages, whilst others have groups of vm's that are run together as an assembly of the various tiers in a multi-tiered software solution, for example, a database tier, middleware tier, and front-ends.  So we're pleased to unveil a more powerful VirtualBox Manager to address the needs of these users: VM Groups Groups allow you to organize your VM library in a sensible way, e.g.  by platform type, by project, by version, by whatever. To create groups you can drag one VM onto another or select one or more VM's and choose Machine...Group from the menu bar. You can expand and collapse groups to save screen real estate, and you can Enter and Leave a group (think iPad navigation here) by using the right and left arrow keys when groups are selected. But groups are more than passive folders, because you can now also perform operations on groups, rather than all the individual VMs. So if you have a multi-tiered solution you can start the whole stack up with just one click. Autostart Many VirtualBox users run dedicated services in their VMs, for example, running a Wiki. With these types of VM workloads, you really want the VM start up when the host machine boots up. So with 4.2 we've introduced a cross-platform Auto-start mechanism to allow you to treat VMs as host services. Headless VM Launching With VM's such as web servers, wikis, and other types of server-class workloads, the Console of the VM is pretty much redundant. For some time now VirtualBox has offered a separate launch mechanism for these VM's, namely the command-line interface commands VBoxHeadless or VBoxManage startvm ... --type headless commands. But with 4.2 we also allow you launch headless VMs from the Manager. Simply hold down Shift when launching the VM from the Manager.  It's that easy. But how do you stop a headless VM? Well, with 4.2 we allow you to Close the VM from the Manager. (BTW best to use the ACPI Shutdown method which allows the guest VM to close down gracefully.) Easy VM Creation For our expert users, the  New VM Wizard was a little tiresome, so now there's a faster 2-click VM creation mode. Just Hide the description when creating a new VM. Powerful VMs  As the hosts have become more powerful, so are the guests that are running inside them. Here are some of the 4.2 features to accommodate them: Virtual Network Interface Cards  With 4.2, it's now possible to create VMs with up to 36 NICs, when using the ICH9 chipset emulation. But with great power comes great responsibility (didn't Obi-Wan say something similar?), and so we have also introduced bandwidth limiting to prevent a rogue VM stealing the whole pipe. VLAN tagging Some of our users leverage VLANs extensively so we've enhanced the E1000 NICs to support this.  Processor Performance If you are running a CPU which supports Nested Paging (aka EPT in the Intel world) such as most of the Core i5 and i7 CPUs, or are running an AMD Bulldozer or later, you should see some performance improvements from our work with these processors. And while we're talking Processors, we've added support for some of the more modern VIA CPUs too. Powerful Automation Because VirtualBox runs atop a fully blown operating system, it makes sense to leverage the capabilities of the host to run scripts that can drive the guest VMs. Guest Automation was introduced in a prior release but with 4.2 we've revamped the APIs to allow a richer and more powerful set of operations to be executed by the guest. Check out the IGuest APIs in the VirtualBox Programming Guide and Reference (SDK). Powerful Platforms  All the hardcore engineering that has gone into 4.2 has been done for a purpose and that is to deliver a fast and powerful engine that can run almost any x86 OS because of the integrity of the virtualization. So we're pleased to add support for these platforms: Mac OS X "Mountain Lion"  Windows 8 Windows Server 2012 Ubuntu 12.04 (“Precise Pangolin”) Fedora 17 Oracle Linux 6.3  Here's the proof: We don't have time to go into the myriad of smaller improvements such as support for burning audio CDs from a guest, bi-directional clipboard control,  drag-and-drop of files into Linux guests, etc. so we'll leave that as an exercise for the user as soon as you've downloaded from the Oracle or community site and taken a peek at the User Guide. So all in all, a pretty solid release, one that we hope you'll enjoy discovering. - FB 

  Read the article

• Different fan behaviour in my laptop after upgrade, what to do now?

  - by student

  After upgrading from lubuntu 13.10 to 14.04 the fan of my laptop seems to run much more often than in 13.10. When it runs, it doesn't run continously but starts and stops every second. fwts fan results in Results generated by fwts: Version V14.03.01 (2014-03-27 02:14:17). Some of this work - Copyright (c) 1999 - 2014, Intel Corp. All rights reserved. Some of this work - Copyright (c) 2010 - 2014, Canonical. This test run on 12/05/14 at 21:40:13 on host Linux einstein 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64. Command: "fwts fan". Running tests: fan. fan: Simple fan tests. -------------------------------------------------------------------------------- Test 1 of 2: Test fan status. Test how many fans there are in the system. Check for the current status of the fan(s). PASSED: Test 1, Fan cooling_device0 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device1 of type Processor has max cooling state 10 and current cooling state 0. PASSED: Test 1, Fan cooling_device2 of type LCD has max cooling state 15 and current cooling state 10. Test 2 of 2: Load system, check CPU fan status. Test how many fans there are in the system. Check for the current status of the fan(s). Loading CPUs for 20 seconds to try and get fan speeds to change. Fan cooling_device0 current state did not change from value 0 while CPUs were busy. Fan cooling_device1 current state did not change from value 0 while CPUs were busy. ADVICE: Did not detect any change in the CPU related thermal cooling device states. It could be that the devices are returning static information back to the driver and/or the fan speed is automatically being controlled by firmware using System Management Mode in which case the kernel interfaces being examined may not work anyway. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. ================================================================================ 3 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0 info only. Test Failure Summary ================================================================================ Critical failures: NONE High failures: NONE Medium failures: NONE Low failures: NONE Other failures: NONE Test |Pass |Fail |Abort|Warn |Skip |Info | ---------------+-----+-----+-----+-----+-----+-----+ fan | 3| | | | | | ---------------+-----+-----+-----+-----+-----+-----+ Total: | 3| 0| 0| 0| 0| 0| ---------------+-----+-----+-----+-----+-----+-----+ Here is the output of lsmod lsmod Module Size Used by i8k 14421 0 zram 18478 2 dm_crypt 23177 0 gpio_ich 13476 0 dell_wmi 12761 0 sparse_keymap 13948 1 dell_wmi snd_hda_codec_hdmi 46207 1 snd_hda_codec_idt 54645 1 rfcomm 69160 0 arc4 12608 2 dell_laptop 18168 0 bnep 19624 2 dcdbas 14928 1 dell_laptop bluetooth 395423 10 bnep,rfcomm iwldvm 232285 0 mac80211 626511 1 iwldvm snd_hda_intel 52355 3 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30144 1 snd_seq_midi coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi joydev 17381 0 serio_raw 13462 0 iwlwifi 169932 1 iwldvm pcmcia 62299 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29482 2 snd_pcm,snd_seq lpc_ich 21080 0 cfg80211 484040 3 iwlwifi,mac80211,iwldvm yenta_socket 41027 0 pcmcia_rsrc 18407 1 yenta_socket pcmcia_core 23592 3 pcmcia,pcmcia_rsrc,yenta_socket binfmt_misc 17468 1 snd 69238 17 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi soundcore 12680 1 snd parport_pc 32701 0 mac_hid 13205 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc firewire_ohci 40409 0 psmouse 102222 0 sdhci_pci 23172 0 sdhci 43015 1 sdhci_pci firewire_core 68769 1 firewire_ohci crc_itu_t 12707 1 firewire_core ahci 25819 2 libahci 32168 1 ahci i915 783485 2 wmi 19177 1 dell_wmi i2c_algo_bit 13413 1 i915 drm_kms_helper 52758 1 i915 e1000e 254433 0 drm 302817 3 i915,drm_kms_helper ptp 18933 1 e1000e pps_core 19382 1 ptp video 19476 1 i915 I tried one answer to the similar question: loud fan on Ubuntu 14.04 and created a /etc/i8kmon.conf like the following: # Run as daemon, override with --daemon option set config(daemon) 1 # Automatic fan control, override with --auto option set config(auto) 1 # Status check timeout (seconds), override with --timeout option set config(timeout) 2 # Report status on stdout, override with --verbose option set config(verbose) 1 # Temperature thresholds: {fan_speeds low_ac high_ac low_batt high_batt} set config(0) {{0 0} -1 55 -1 55} set config(1) {{0 1} 50 60 55 65} set config(2) {{1 1} 55 80 60 85} set config(3) {{2 2} 70 128 75 128} With this setup the fan goes on even if the temperature is below 50 degree celsius (I don't see a pattern). However I get the impression that the CPU got's hotter in average than without this file. What changes from 13.10 to 14.04 may be responsible for this? If this is a bug, for which package I should report the bug?

  Read the article

• Can ping device from one computer and not the other

  - by Sean Duggan

  I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >