Search Results

Search found 4879 results on 196 pages for 'karthik ram'.

Page 156/196 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• swapping or trashing with vast amounts of unmapped pagecache

  - by Marco

  I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only Firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happens: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this?

  Read the article

• swapping or trashing with vast amounts of unmapped pagecache

  - by Marco

  I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

  Read the article

• FTP timing out after login

  - by Imran

  For some reasons I cant access any of my accounts on my dedicated server via FTP. It simply times out when it tried to display the directories. Heres a log from FileZila... Status: Resolving address of testdomain.com Status: Connecting to 64.237.58.43:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 19:39. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER testaccount Response: 331 User testaccount OK. Password required Command: PASS ******** Response: 230-User testaccount has group access to: testaccount Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (64,237,58,43,145,153) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 18 matches total Error: Connection timed out Error: Failed to retrieve directory listing I have restarted the FTP service serveral times but still It doesnt loads. I only have this problem when my server is reaching it peak usage which is still only 1.0 (4 cores), 40% of 4GB ram. The ftp connections isnt maxed out because only me and my colleague have access to FTP on the server.

  Read the article

• PHP-FPM and APC for shared hosting?

  - by Tiffany Walker

  We are looking into finding a way to get APC to only create one cache per account / site. This can be done with Fastcgi (last update 2006…) but with Fastcgid APC will have to create multiple caches for multiple processes run by the same account. To get around this problem, we have been looking into PHP-FPM PHP process manager allows multiple PHP processes to share a single APC cache. But from what I have read (I hope I'm wrong) , even if you create a pool per process, all sites accross all pools will share the same APC cache. This brings us back to the same problem as with shared Memcached: it's not secure ! On php-fpm's site I read that you can chroot php-fpm pools and define a specific UID and GID per pool… if this is the case then shouldn't APC have to use this user and not have access to other pools cache ? An article here (in 2011) suggests that you would need to run one process per pool creating multiple launchers on different ports and different config files with one pool per config file : http://groups.drupal.org/node/198168 Is this still neceessary ? If so what would be the impact of running say 800 processes of php-fpm ? Would it be mainly memory ? If so how can I work out what the memory impact would be ? I guess that it would be better to run 800 times php-fpm then to have accounts creating multiple APC caches for a single site ? If on average an account creates a 50MB cache and creates 3 caches per account that makes 150Mb per account which makes 120GB… However if each account uses on average only 50Mb that would make 40GB We will have at least 128GB of ram on our next server so 40GB is acceptable if running 800 x PHP-FPM does not create an overhead of more than 20GB ! What do you think is PHP-FPM the best way to go to provide secure APC cache on shared hosting with a server that has a decent amount of memory ? Or should I be looking at another system ? Thanks !

  Read the article

• DVD-ROM: Pioneer DVD-115GA not being detected.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

  Read the article

• How to make 7zip faster

  - by user34463

  I normally use winRAR over 7Zip simply because its faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7zip and winRAR default settings on their normal compression and their best compression, and in a lot of cases winRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7zip speed up? I'd like it to at least be on par with rar's speed Is there a way to make recovery segments in 7zip like you can in rar? I didn't see any, but I guess it could be a command line thing. I tested winrar and 7zip using the latest stable version of each (4.something with 7zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core intel i7 720 (1.6ghz)/(2.8ghz) with 4gb DDR3 ram, and the 64-bit version of 7zip.

  Read the article

• Problem booting virtual machine after converting VMDK to VHD

  - by vg1890

  I used the VMWare VCenter Converter Standalone Client to convert a physical drive on my old PC to a virtual drive. The conversion worked fine and I ended up with a valid VMDK file. Next, I wanted to convert the VMDK to a VHD for use with Microsoft Virtual PC, since that's what I use on my new box. I used WinImage for the conversion and that worked fine, too. I can access the files from the virtual drive through WinImage. However, when I create a new virtual machine using Virtual PC and add the existing VHD file, the machine doesn't boot. The initial boot screen flashes with the amount of RAM and then the screen goes black. If I turn off the VM and reboot in safe mode I can see the drivers being loaded until eventually it gets to crcdisk.sys and hangs indefinitely. Any ideas how to fix this? I'm not opposed to starting over from scratch if there's another method to turn my physical machine into a Virtual PC VM. Thanks! EDIT - I should add that the virtual drive is a system boot drive and not a secondary drive. EDIT - I tried booting from the install CD and doing a repair. The result was that the system could not be repaired due to a "driver error."

  Read the article

• Windows Clients: Windows or Linux Domain Controller?

  - by Ramon Marco Navarro

  I'm planning to set up a domain controller for our small computer laboratory. I'm a little confused as to what operating system to use for our domain controller. What's in the lab: The lab has 25 units running a mix of Windows 7 and Windows XP. The domain controller will only have 2GB of RAM running a C2D E7200. (Is this enough?) What we want: The Domain Controller will also be running a git server. The Domain Controller will also be used as a general development machine (mostly Java, PHP). A way to centralize the updates for the windows clients, so that they won't have to download the same patches from the remote site. The machines would just query them from the local domain controller and get the updates from there. Our head recommended that I virtualize a Windows Server 2008 system under a Linux host and use the former as a domain controller and the latter for development or the other way around. A comparison of the advantages and disadvantages of using a Linux distribution or Windows Server 2008 in this situation would also be appreciated. As you may have noticed by now, I'm kinda new to setting up a domain so I hope you guys will be able to help me. Thank you.

  Read the article

• How to troubleshoot web server lock-up (Debian Squeeze)

  - by Ryan

  Every once in a while, my web server slows so significantly, it seems locked up. Can't SSH in, no sites being served. It's a VPS that started out as Debian 5 which I upgraded to testing (squeeze). It's a typical LAMP set-up with the sole purpose of running a couple of wordpress sites. One time when it locked up, I got to one of the sites, but it was wordpress complaining it couldn't establish a database connection. So it seemed as if something was really chewing up the CPU and mysqld either timed out, or possibly failed and couldn't restart. But since I couldn't SSH in I feel more inclined to attribute it to CPU. But the only processes running now, aside from OS and kernel stuff: apache mysqld python (for fail2ban) sshd exim4 It has 512M of RAM and 1.5 GB of swap. Every time I check on it, it has plenty of free memory and is using virtually no swap (usually 2-3M). And since I am running fail2ban I don't think I'm getting ddosed. I did find this in my logwatch email this morning (it locked up late last night, when there would have been very little traffic): 6 Time(s): [<ffffffff810a0ebc>] ? oom_kill_process+0x7e/0x23d 6 Time(s): [<ffffffff810a1505>] ? __out_of_memory+0x12a/0x141 6 Time(s): [<ffffffff810a1586>] ? out_of_memory+0x6a/0x94 I didn't find anything else suspicious. It can't be my provider's host because I can SSH in and restart the VM, and everything seems fine. Anybody know which logs I should start poring through to find the core of my problem? Thanks guys.

  Read the article

• Booting the server redis no errors

  - by Tylër

  The redis but usually begins with the following errors: tyler @ tyler-vortex: ~ / pens $. / src / redis-server [3690] Dec 01 10:56:05 # Warning: the specified config file, using the default config. In order to Specify a config file use 'redis-server / path / to / redis.conf' [3690] Dec 01 10:56:05 # Unable to set the max number of files limit to 10032 (Operation not permitted), setting the max configuration to 992 clients. Others errors founds: tyler@tyler-vortex:~/redis$ sudo ./utils/install_server.sh Welcome to the redis service installer This script will help you easily set up a running redis server Please select the redis port for this instance: [6379] Selecting default: 6379 Please select the redis config file name [/etc/redis/6379.conf] Selected default - /etc/redis/6379.conf Please select the redis log file name [/var/log/redis_6379.log] Selected default - /var/log/redis_6379.log Please select the data directory for this instance [/var/lib/redis/6379] Selected default - /var/lib/redis/6379 Please select the redis executable path [/usr/local/bin/redis-server] cat: ./redis.conf.tpl: Arquivo ou diretório não encontrado cat: ./redis_init_script.tpl: Arquivo ou diretório não encontrado ERROR: Could not write init script to /tmp/6379.conf. Aborting! Furthermore, I would like to know how to configure it not to consume so much RAM. Follow the memory configuration of our website, but the settings of "vm-*" does not exist in the file redis.conf. http://redis.io/topics/virtual-memory You have to create them? * Edit: I installed. After that, I believe that I no longer have access via. / Src / redis-server, because it happens: tyler@tyler-vortex:~$ cd redis/ tyler@tyler-vortex:~/redis$ ./src/redis-server [2616] 01 Dec 22:29:30 # Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf' [2616] 01 Dec 22:29:30 # Opening port 6379: bind: Address already in use tyler@tyler-vortex:~/redis$ But there's another detail, the redistribution starts with the system .. redis 127.0.0.1:6379> exit tyler@tyler-vortex:~/redis$ ./src/redis-cli redis 127.0.0.1:6379> exit ... but how can I now see that the communication had before you installed from. sh?

  Read the article

• Windows Server 2008 Stops Responding (Hyper-V Role Enabled)

  - by blackf0rk

  The machine is a brand new Dell Precision m6500, Core i5, 8GB RAM. Windows Server 2008 R2 (fully patched) with Hyper-V Role Enabled. Virtualization options in the BIOS are ON, SpeedStep is OFF, couldn't find C1E option in the BIOS to turn it off (I also got the impression that SpeedStep is C1E, but the Intel Product site lists them as separate "features." shrug) The server stops responding without any apparent reason. I've tried testing in multiple scenarios, all of which result in a crash at seemingly random times: With the Server sitting idle, no apps running. Server sitting idle with a Virtual Machine running. Using a BurnInTest application There's no blue screen. It doesn't restart. The screen just sits there. The keyboard backlight still responds and comes on with input, but nothing on the screen changes. There are no errors in the error log. I have to hold down the power button to turn it off. Doing memory tests on bootup results in no errors with the memory. I have a second identical system and the same thing happens there too. I've dual-booted into Windows 7 Profession x64 on this system with no problems. Further testing has shown that the issue is definitely related to Windows Server 2008 R2 and Hyper-V as it appears the crashing does not happen when the services are not running. I've installed all hotfixes relating to this issue (that I could find): 975530, 979444, 979491, 976427 System is still crashing without response.

  Read the article

• AWStats consumes too much resource, how to disable temporarily

  - by trante

  For some days AWStats takes %10-%20 of my CPU, takes 400-550 MB RAM and works for hours. Maybe my site's traffic became larger so process time takes more time than before or some bugs in program makes this. Anyway I want to disable AWStats temporarily. Maybe I would want to activate it in future. I found that answer. But it gives commands to remove AWStats. I only want to disable it temporarily. My system is Centos 6.3, Plesk 11.5.30 Update #19. I tried to disable cron jobs. I run this # killall awstats.pl I opened # vi /etc/cron.daily/awstats file and I changed it to this: #!/bin/sh #/usr/share/awstats/awstats_updateall.pl now -awstatsprog=/var/www/cgi-bin/awstats/awstats.pl -configdir=/etc/awstats >/dev/null 2>&1 exit 0 After some time I still see that awstats is running. What should I do more to not to awstats run again ? But without removing my files. After changing " /etc/cron.daily/awstats" file awstats doesn't start in daytime. But every night in 03:15 awstats starts again. Because of Plesk auto updates are working at that time, I changed from Plesk. Don't auto update automatically. But it seems like last night at 03:15 awstats started again. Is there any way to stop awstats temporarily except this solution ? Because this solution deletes awstats configs permanently and I don't know how to revert it back in future ? Turn off all AWStats for Plesk 11+ domains #!/bin/bash for i in /var/www/vhosts/*; do echo "Turning off and deleting Stats for" echo `basename $i` /usr/local/psa/admin/bin/webstatmng --unset-configs --stat-prog=awstats --domain-name=`basename $i` /usr/local/psa/admin/bin/webstatmng --clean --stat-prog=awstats --domain-name=`basename $i` done

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  Hello, I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Overheating computer

  - by Samurai Waffle

  My computer overheats somewhat frequently, usually during intense use. And by intense use I mean browsing the internet while downloading, or gaming. It even overheats on extremely old games though, Master of Orion 2, which was developed for Windows 95. My computer has a Pentium 4 Ghz processor, 2 GB of ram, and is running Windows XP. One of the symptoms it has after overheating, is that it'll turn on immediately afterwards, but won't show any video on my monitor. I usually have to wait at least 5 minutes (mostly at least 10) before I can get it to turn on and show video on my monitor. I also usually have to wiggle around the graphics card a little bit, which is the ASUS A9550 Series with 256 MB. I'm not sure exactly what is causing the computer to overheat. At first I thought it was the video card, but after I noticed it was doing it while playing Master of Orion 2, I'm not so sure, because that game can't be making the video card work all that hard. So how exactly can I pinpoint the problem? Thanks for any help provided. Edit: Okay I downloaded the programs that you specified, and will start benchmarking my system to try and pinpoint what's overheating. What is the temperature range for when it's getting to hot? Also I have an abundant amount of software experience with computers, but unfortunately not to much hardware experience.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• Asus P5Q doesn't post at all

  - by Sebi

  I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

  Read the article

• Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

  - by Rizwan Kassim

  There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

  Read the article

• How to make sysctl network bridge settings persist after a reboot?

  - by user183394

  I am setting up a notebook for software demo purpose. The machine has 8GB RAM, a Core i7 Intel CPU, a 128GB SSD, and runs Ubuntu 12.04 LTS 64bit. The notebook is used as a KVM host and runs a few KVM guests. All such guests use the virbr0 default bridge. To enable them to communicate with each other using multicast, I added the following to the host's /etc/sysctl.conf, as shown below net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Afterwards, following man sysctl(8), I issued the following: sudo /sbin/sysctl -p /etc/sysctl.conf My understanding is that this should make these settings persist over reboots. I tested it, and was surprised to find out the following: root@sdn1 :/proc/sys/net/bridge# more *tables :::::::::::::: bridge-nf-call-arptables :::::::::::::: 1 :::::::::::::: bridge-nf-call-ip6tables :::::::::::::: 1 :::::::::::::: bridge-nf-call-iptables :::::::::::::: 1 All defaults are coming back! Yes. I can use some kludgy "get arounds" such as putting a /sbin/sysctl -p /etc/sysctl.conf into the host's /etc/rc.local but I would rather "do it right". Did I misunderstand the man page or is there something that I missed? Thanks for any hints. -- Zack

  Read the article

• Windows 2003 R2 x86 Mini dump fails to write to disk

  - by Randy K

  I have 3 blade servers that are Blue Screening with a 0xC2 error as far as we can tell randomly. When it started happening I found that the servers weren't set to do provide a dump because they each have 16GB RAM and a 16GB swap file divided over 4 partitions in 4GB files. I set them to provided a small dump file (64K mini dump), but the dump files aren't being written. On start up the server event log is reporting both Event ID 45 "The system could not sucessfully load the crash dump driver." and Event ID 49 "Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory." I understanding is the the small dump shouldn't need a swap file large enough for all physical memory, but the error seems to point to this not being the case. The issue of course is that the max swap file size is 4GB, so this seems to be impossible. Can anyone point me where to go from here?

  Read the article

• Auto load balancing two node Cluster Hyper-v 2008 R2 enterprise?

  - by Kristofer O

  My setup is a 2 node cluster with 72GB ram each and a ~10TB MD3000i Iscsi SAN. I have about 30VMs running I keep about 15 on either server. I do a live migration to the other server if I need to run updates or whatever... Either one of the servers is able of running all VM if needed, but the cpu is pretty high. Here's my issues. I know Hyper-v has a limit of a single Live-migration at a time. But Why doesn't it queue them up to move one at a time? If I multi select I don't get the option to live migrate a one at a time. OR if I'm in the process of Migrating one it will give me an error that it's currently migrating a VM... Is there a button I missed that will tell a Node that it needs to migrate all the VMs elsewhere? Another question, does anyone know whats the best way to load balance VMs based on CPU and/or network utilzation. I have some VMs that don't do much. and some that trash the CPU or network. I'd like to balance it out on both servers if at all possible. and Is there any way to automate it? last question... If I overcommit my Cluster is there a way to tell the cluster that I want certian VMs the be running and to savestate other VMs based on availible system resources? Say when my one node blue screens and the other node begins starting the VMs up. I want the unimportant ones to shutdown or savestate so the important ones can stay running or come back online. Thanks just for reading all that. Any help would be great.

  Read the article

• Windows 7 AIK help

  - by microchasm

  I've just got in a few Windows 7 (64, Windows 7 Professional) machines, and I'm trying to get the AIK 2010 working. I've set up one of the machines, and installed AIK and MDT on it. I've followed the directions at http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx about 3 times now, and also tried the built-in .chm help files that came with AIK. In AIK I grab the install.wim image off the OEM cd, at which point it asks me which version (I select Professional). I follow the rest of the instructions creating a new Autounattend answer file, and fill in the various bits and pieces according the the step-by-step guides. I verify the Answer file (No warnings or errors), save it, and copy it onto a USB drive. I go to another machine, insert it's OEM Win7 Disk, and power on. I've set BIOS to boot from CD, so it goes directly into the installation. Once The files are loaded, and Setup starts, it immediately asks which version to install (Home basic, Home Premium, Professiona, Ultimate). Ugh, I thought it was supposed to be an automated install, and that selecting the Version when opening the .wim file would answer this question. I looked for an option to set which version to be installed on the net, in the help, and in AIK itself; to no avail. Anyway, just for laughs I select Professional,and hit continue. It copies files for about 10 seconds, then fails with the following error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information. [OK]". Clicking OK reboots the box, and obviously there are no log files because the OS isn't installed. It is a Dell Optiplex 380 , Intel Core Duo 2.93 GHzl 4 GB RAM, 64 Bit. Any help would be REALLY appreciated.

  Read the article

• eMachine W5243 won't POST; fans run but optical drive will not open.

  - by NicciAdonai

  Symptoms are what is described in the title. The machine reacts to the power button being hit by spinning up the two fans: CPU and PSU. The hard drive (SATA) spins up as well. No other reaction. This one symptom is particularly weird, though: the optical drive will not open with the IDE cable attached, but if I unplug it from the mobo it will. I can turn the PC on with it attached, won't open; then unplug IDE while it is still on, WILL open; then plug IDE back in with the PC STILL ON, WON'T open. I have disconnected every peripheral unnecessary to POST. These include: mouse/keyboard, PCI modem, the IDE optical drive (power and data), and the SATA HDD (power and data). Video is onboard. The only two things connected are DB15 video and power cable. There were 2 512 MB DDR2 sticks of RAM in it. I have tried running it with just one of them, then switched the other in. Currently seated is a completely different 1 GB stick that I keep around for troubleshooting purposes, and I have tried it in both slots. I have replaced the CMOS battery with a used one I had lying around, and which worked in the computer it came out of. I have tested the PSU with a tester to confirm it was good, then tried connecting another PSU just in case--same symptoms. I have even tried a suggestion I found elsewhere on this site wherein one disconnects power from the PSU and then presses the PC's power button twice, thereby "resetting" the PSU. Currently I am trying yet another suggestion: turn it on and wait an inordinate amount of time for POST. Any help would be appreciated.

  Read the article

• Win7 Pro x64 task manager hangs when restarting explorer.exe after waking from sleep

  - by Brandon Dybala

  I have a desktop running Windows 7 x64 Pro, set for Hybrid Sleep on a wired network. Wakeup is only enabled from the keyboard (wake on mouse and Wake-On-LAN are both disabled). Sometimes when it wakes up, there is no network connectivity. The notification area icons for both network and volume don't respond to clicks. If I open the Network and Sharing Center, clicking the red X doesn't do anything. Restarting does fix the problem, but I'm looking for a solution that does not require restarting (if at all possible). Drivers are all up to date. I've tried opening Task Manager and restarting the explorer.exe process, but Task Manager freezes for a few minutes, the "New Task" dialog closes, and explorer.exe has not restarted. CPU and memory usage are both normal. One thread suggested making sure the BIOS was set for S3 sleep mode only (not S1 or S1 & S3), but I haven't checked this yet. Going back to sleep and waking back up does not help. So far only a reboot has fixed the issue. System specs: Windows 7 x64 Pro Asus P8Z68-V PRO/GEN3 128 GB Crucial m4 SSD (Firmware version 0309) Intel Core i7 2600 3.4 GHz 16 GB RAM Any ideas? Brandon

  Read the article

• Can VMWare Server 2.0 be useful in Production for easing backups?

  - by Keith Sirmons

  Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

  Read the article

• Blue screen of death while installing any Adobe Air application

  - by Gaurav Sharma

  Whenever I try to install an Air application I get a Blue Screen and then my system restarts. I cannot even take a screenshot of it. This happens with every air application I try to install. I also searched for the same on Adobe forums and found the same problem being faced by someone else. His problem was resolved by uninstalling a software named "Folder Lock". I searched my hard disk for this software and found one, so I deleted that software (shift+delete) and removed all it's traces from registry too but that still doesn't solved the problem. I also tried disabling the antivirus software and then install the air application but this also didn't helped. Here is the screenshot of the BSOD. I was able to install air applications earlier, but now I can't. Anybody having same sort of problem. One colleague of mine is also having the same problem. Please help me out. My system's config is as follows: Windows XP Home sp3 Flash Builder 4, with SDK 4.1, 3.5 installed in it. Adobe Air v 2.5 1.5 GB RAM 1.66 MHz processor Thanks

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >