Search Results

Search found 4487 results on 180 pages for 'printer sharing'.

Page 156/180 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Curious enigma of a network cable / connection / quality

  - by Foo Bar

  So, the situation is like this: I'm renting an apartment in a large house and I'm sharing internet with the landlord who lives downstairs. The internet is (in my best guess) optical 20/20Mbit. I don't know how it's all wired in his flat (haven't been there / seen it). Anyway, in my flat comes a cable which seems to be connected directly to the optic to ethernet router (and the password is the default one, so I have access, he he). There was a switch connected to that and to wires that go around the flat, and the wiring is terrible. It's even mixing phone and ethernet, and from what I see some cables are even interconnected!? Anyways, this cable that comes to my flat is very short. I can barely connect my computer on it, but if I do, I seem to get decent speed / performance. Not great, but decent. If, however, I connect switch to it (tried 2 different switches and a wifi switch) it's all blinking but I can't even connect to 192.168.1.1 (the router). DHCP fails, ping is losing 80-100% of replies. So I connected this cable directly to the other cable which goes to my work room, with a connector that has two female jacks and no electronics. Now when I connect my computer in my room, again, the performance is decent. When I connect WRT54GL (with tomato, DHCP disabled) to it and I plug a cable in this WRT and to my computer... the performance is gone. Download seems okay on Speedtest, but upload is .2Mbps and it's connecting forever. So what kind cable troll am I having here? Any ideas?

  Read the article

• UIDs for service users in Mac OS X

  - by LaC

  Some third-party servers should be run under a special user for security reasons (eg, PostgreSQL is typically run by "postgres"). Of course, these service users should not show up in the Mac OS X login windows. I know how to create hidden users using dscl or dsimport, but I'm wondering what the best policy is for assigning UIDs (and matching GIDs). Apple's documentation states that UIDs from 0 to 100 are reserved (pg. 69), but OS X comes with several special users and groups outside that range. I used to use ids from 401 onwards for services, but I noticed that OS X 10.6 has started using that range for groups created by the Sharing pane in System Preferences. What is the recommended ID range to use for third-party services, then? Perhaps I should just use IDs in the 500 range, since all that is needed to hide a user in Snow Leopard is setting his password to "*"? Also, most of Apple's services have names starting with an underscore, with an alias sans underscore; eg, _sandbox and sandbox. Is there any special significance to this? Should I do the same for my services?

  Read the article

• Google Apps Domain Level Shared Contacts?

  - by dkirk

  My firm just switched to Google Apps Premiere addition 2 weeks ago and aside from the way Google handles shared contacts, things are going quite well. Previously, on our Exchange server we had numerous shared contact lists set up in the shared folders. We had a separate list for vendors, sales agents, etc.. Is there not a way to set up lists or groups such as this on the domain level in Google Apps? I have found a ton of forums with users asking the same question but no good answers unless you purchase some third party app in the marketplace. I have toyed around with the "google-shared-contacts-client" here: http://code.google.com/p/google-shared-contacts-client/ and this almost does it but it falls short when trying to group contacts on the domain level or when trying to search for a contact by company name. Are either of these things possible? I am now looking to create a Google Doc spreadsheet to share with the domain just to have a separated defined list of contacts that is search-able by various fields... Anyone who could shed some light on domain level contact sharing relating to the points above, I would be most grateful...

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Sync, share and backup policy using NAS

  - by Cue

  Trying to come up with a way to keep in sync while sharing and keeping a backup of my music/photos and movies. Currently I have an iMac in Greece and a MBP with me in the UK. As a result I've ended up with 2 iPhoto and iTunes libraries not to mention Documents scattered here and there, user settings etc. I also like to have a backup in case of a drive failure or the need to clean install. It seems that iPhoto and iTunes don't work really well with networked libraries. The way I think about it is to have a NAS where I keep my iTunes and iPhoto library but also rsync daily to my MBP to have a local copy. That way my files are shared across the network as well as act like a backup. In addition I get to have my files wherever I take my MBP but also have the ability to clean install. The tricky part comes from keeping in sync the iMac which is miles away. Again I'm considering a mirror setup (NAS, rsync to the iMac) as well as an rsync between the two NAS. It pretty much resembles the way Dropbox works, sans the requirement to go through their servers but I'm no "superuser" and don't really know if it is even feasible to have such a setup. Looks like there are so many things that can go wrong.

  Read the article

• Strange File-Server I/O Spikes - What Is Causing This?

  - by CruftRemover

  I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• Todo/task manager for android and desktop linux

  - by RiaD

  I'm looking forward to Task/ToDo Manager. It should work under Android, Linux(or Web). If it's very cool, one of them is OK too, Android is preferable in this situation. Necessary features: Russian or English language Possibility to mark task as finished Interesting features: (I want as more, as possible, while it's OK, if some of them isn't avaliable) Nice and easy-to-use interface Possibility to choose finish time for task. After that it's showed as overdue. Possibility to choose start time for task. Before it task is inactive and maybe shown or hide Possibility to add nested tasks. Task marks completed when all sub-tasks are completed. Possibility to make dependencies. If A depends on B, and B isn't finished yet, A is inactive as in third feature. Possibility to create task in a moment without fill-all-this-forms Syncronization between version(Android to linux or Android to web) Notification (on Android only) Features, that I'm not interested in: Creating more than one todo list sharing ToDo's I've seen couple of managers. Best I've seen now is Task Coach for Linux, but I don't very like its interface, and there is no version for Android.

  Read the article

• How to correctly setup home directories and permissions on a mounted partition.

  - by user36505

  I'm setting up a Fedora 12 server. I have a root (/) partition where the boot (/boot) partition is mounted and then a separate partition (/files) for separating home directories and shares away from the other partitions. The filesystem mounts fine and users can be created to have home directories in /files/home/[user] just fine. However, when I log in as one of those users, I get an error saying "Cannot chdir in to /files/home/[user]: permission denied". If I create a user under the default /home using the same process, everything works fine. The same goes for when I try and browse a share in windows; I can see the shares, but cannot access them. The permissions and owners on /files and /files/home are the same as /home. When the user is created, the user directory owner and permissions are also the same. How can I set the /files partition up so that it can be used as a home directory and for samba sharing rather than using the root (/) partition? Thanks.

  Read the article

• Apps won't start after vanilla reboot

  - by Daniel R Hicks

  I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• Over gigabit connection, Teracopy does 31MB/s, but Windows 8 does it at ~109MB per second?

  - by Gaurang

  I got my brain-melting first taste of Gigabit networking today, between my 2011 MacMini and Windows 8 Pro desktop connected via Cat.5e to Linksys WRT320N(sporting dd-WRT). After making sure that the line speed on both systems showed 1Gbps, I proceeded to copying a 2.4GB MP4 from the Mini to the Win 8 desktop (SMB sharing). Although satisfied with the 30-34 MB/s that Teracopy was showing (that was a proper step-up for me from 10 MB/s), I still was curious about this massive difference in the advertised and real-world speed. 2 hours of Google had me believing that there were other factors that resulted in less speed, SMB being one. So just for the sake of doing it, I iPerf'd both the systems and guess what that showed - around 875mbps on both systems! I then stumbled upon this little piece of info after which I turned off Teracopy and copied the same file through Windows 8's regular copier. 109 MB/s. Molten brains :) What exactly is causing this? And can I enable such speeds via Teracopy? I really dig the extra features that Teracopy has, will surely miss them now :D

  Read the article

• Command line switching

  - by Larry

  I have read through some suggestions but I am just not technical enough to get this I think. I am a CAD designer and each file has 5 files associated with it. I have 3 sets of 5 files, and each set needs to go into its own zip file, placed on a separate server. For example: "C:\Program Files\7-zip\7z.exe" a file1.zip "O:\server2\map files\BC\BC.d*"-0 "C:\Program Files\7-zip\7z.exe" a file2.zip "O:\server2\map files\BC\ON.d*"-0 "C:\Program Files\7-zip\7z.exe" a file3.zip "O:\server2\map files\BC\AB.d*"-0 and I am in directory "S:\server\map files\provinces" (for example). These lines run within an existing batch file and by the time it reaches the 3 lines above, it's in the S: directory sample above. So it's looking on my pc for the 7-zip program, creating 3 zip file names which it does, but places those zip files on a separate server which it doesn't and the first zip file also includes all the other 10 files, the second zip file the same plus the first zip file, and the third the same with the other two zip files making me think the code isn't recognizing the part after file1.zip where I am trying to tell it what files to include and where to place the zip files. Ultimately, I want to either have the system create a new zip file if the old one was deleted, or copy the new files into the existing zip and overwrite any older files, and for these zip files to be placed in a separate location which is where we share our files with other personnel from within our company. The S: drive is for all originals, and O: is for sharing. Is there a list of all switching options with many different samples?

  Read the article

• Cisco AnyConnect VPN client - prevent connecting as work network

  - by Opmet

  From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  Hey guys, First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• Can't Ping - Wireless network of home

  - by Naunidh

  Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

  Read the article

• Where can someone store >100GB of pictures online? [closed]

  - by sbi

  A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Need solution for Network/Servers.

  - by rehanplus

  Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

  Read the article

• "Permission denied" & 500 Internal Server error serving PHP in Mac OS X

  - by Abhic

  I just set up Web Sharing in Mac OS X 10.6.2 Snow Leopard. My httpd.conf allows for ExecCGI and all the folders and files are readable by everybody and even writable by me. I put a simple Hello World in index.php in my base site and yet my apache error log shows this: [Thu Mar 18 00:17:18 2010] [error] [client 192.168.11.135] (13)Permission denied: exec of '/Users/abhic/Sites/index.php' failed [Thu Mar 18 00:17:18 2010] [error] [client 192.168.11.135] Premature end of script headers: index.php <html> <head> <title> Hello </title> </head> <body> <?php echo "Hello"; ?> </body> </html> is what my index.php looks like placed in /Users/abhic/Sites My browser shows a 500 Internal Server Error Any help would do me good in the middle of the night. I have been trying to solve this for way too long. Thank you.

  Read the article

• Iptables and system-config-firewall

  - by nivde92

  I had a set of netfilter rules set with iptables, but someone else told me to use system-config-firewall to add a rule for sharing files with Windows. (Samba) This rewrote the iptables rules file and I lost my own custom rules. I have a backup copy, but am having trouble restoring them. Edit: The server is Centos, I already tried to restore the rules with iptables-restore < /root/working.iptables.rules but for some reason the rules don't change. What are you trying to do? Trying to restore the iptable rules that I have in a backup file. What have you tried in order to make it happen? I've tried to modify the iptables file with vim, since the command iptables-restore was no help. What results did you expect? To get the old rules back. What actually happened? Nothing, when I run the command or edit the file by hand the file doesn't change at all. Maybe something else it's overwriting.

  Read the article

• Excel 2007 - "The macro may not be available in this workbook" Error

  - by Psycho Bob

  We use an Excel sheet that has been protected to prevent modification of it from end users. All in all they are only able to edit certain tabs to add information that will then be used to generate information on other tabs using equations and such. On the tab with the equations, a button is present called "Prep for Internal Hard Copy Print." This button runs a macro that selects the information on the tab, unprotects it, then sends a print job to the user's default printer that contains the unprotected content. Normally this works like a champ. This time around, however, the macro is throwing the following error: Cannot run the macro "FILENAME.xlsx'!MacroName'. The macro may not be available in this workbook or all macros may be disabled. As far as I can tell, the macros are still present within the workbook. This sheet is normally a .xlsm though the user saved it with a different filename as a .xlsx. Also, the macros appear only as MacroName in the .xlsm file and not "FILENAME.xlsx'!MacroName' as it does in the .xlsx. Finally, when I open the .xlsm it asks if I want to enable the macro content while the .xlsx does not prompt for this. Can anyone tell me what's going on with this sheet or know of a way that I can get the macros working in the .xlsx without having to start over with a different sheet?

  Read the article

• problem in fonts type and fonts size on printing

  - by user1400

  hello i have a application on php that i show a report in the table , i want to print this page i can see my page fine in print preview , but when i send thuis page to printer ,the fonts are small and diffrent fonts that i set in css file this is my css file @page { size: A4 landscape; margin-top:2cm; margin-bottom:1cm; margin-left:1cm; margin-right:1cm; } table.print{ text-align:right; border:#999 1px solid; } table.print td.e1{ border-top:#999 1px solid; padding:5px 2px; text-align: right; font-size: 20pt; font-family:"stencil"; } table.print td.e2{ border-top:#999 1px solid; padding:5px 2px; text-align: right; font-size: 120%; font-family:"tahoma"; } thanks

  Read the article

• Deployed Qt5 Application Doesn't Print or Show Print Dialog

  - by MustacheMcLimey

  I'm experiencing Qt4 to Qt5 troubles. In my application when the user clicks the print button two things should happen, one is that a PDF gets written to disk (which still works fine in the new version, so I know that some of the printing functions are working properly) and the other is that a QPrintDialog should exec() and then send to a connected printer. I see the dialog when I launch from my development machine. The application launches on the deployed machine, but the QPrintDialog never shows and the document never prints. I am including print support. QT += core gui network webkitwidgets widgets printsupport I have been using Process Explorer to see what DLLs the application uses on my development machine, and I believe that everything is present. My application bundle includes: {myAppPath}\MyApp[MyApp.exe, Qt5PrintSupport.dll, ...] {myAppPath}\plugins\printsupport\windowsprintersupport.dll {myAppPath}\plugins\imageformats[ qgif.dll, qico.dll,qjpeg.dll, qmng.dll, qtga.dll, qtiff.dll, qwbmp.dll ] The following is the relevant code snippet: void PrintableForm::printFile() { //Writes the PDF to disk in every environment pdfCopy(); //Paper Copy only works on my dev machine QPrinter paperPrinter; QPrintDialog printDialog(&paperPrinter,this); if( printDialog.exec() == QDialog::Accepted ) { view->print(&paperPrinter); } this->accept(); } My first thought is that the relevant DLLs are not being found come print time, and that means that my application file system is incorrect, but I have not found anything that shows me a different file structure. Am I on the right track or is there something else wrong with this setup?

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >