Search Results

Search found 12758 results on 511 pages for 'desktop customization'.

Page 157/511 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Trouble installing Ubuntu 12.04 from USB

  - by Kyle J

  I want to dual-boot Ubuntu Desktop 12.04 on my new ultrabook which has an Intel i7 3517U processor 6GB RAM Windows 7, 64-bit no CD/DVD drive I created my bootable USB stick using pendrivelinux.com with the "ubuntu-12.04.1-desktop-i386.iso". I am following these directions because they include nice screenshots; however, I do not get very far in the process. I am able to boot into the Live Desktop, and then I try to install onto my hard disk. Here are the series of actions that I take next: First, I see this ( http://i.imgur.com/vucYH ) window, and click 'continue' Then I get this ( http://imgur.com/2wESc ) window, and click 'continue' again This appears: and I get worried because it seems like there is no recognition that I have Windows installed. According to the directions I am following, I should see /dev/sda1 and /dev/sda2 partitions. In the drop-down menu at the bottom the only "Device for boot loader installation" is /dev/sdb and no information is shown. I am hesitant to click 'Install Now' for fear of what it might do to Windows. 4. I click 'Quit' and cancel the installation, but then about 5 seconds later this ( http://imgur.com/a/yXi0C ) window pops up (I have expanded it to full screen to scroll and show all the details). 5. Another second later this ( http://imgur.com/vxcrN ) comes up. I'm not sure how relevant this is. Does anyone have any insight into this issue?? Why does it not show my current Windows partition? What would happen if I tried to continue with the installation process? Thanks! PS - sorry, it would only let me post 2 hyperlinks as a new user

  Read the article

• Are there Know issues with Ubuntu 11 and socket 1155? acpi=off

  - by James

  Since building my new system I cant get Ubuntu (or any other flavor of Linux) to "run" properly. To boot the live cd I have to "F6" and turn off acpi or the screen halts at a black screen with "boot stuff" written above the blinking curser. When installed I can only boot if I enter repair mode from Grub menu then once in repair mode I choose Boot Normally and it boots to the desktop. Once on the desktop I can "click" (with the mouse) only on one thing...like firefox or "desktop appearance" and the mouse no longer "clicks" on anything else ...its like the computer freezes but the mouse still moves. I end up using the reset button to restart the computer. I was able to update when prompted to do so....but at the end of the update I could not "click" the "finish" and had to use the manual reset button. I have run Ubuntu since v 8... My system specs are: intel i7 2600k ...Graphics disabled in bios... Asus p8z68-v pro.... 16G Kingston HyperX.... 2 EVGA GTX 570 in SLI.... Mouse is a simple Logitech usb Wireless. Ubuntu installed on secondary sata drive.

  Read the article

• Booting Ubuntu 12.04 in Unity the Windows Theme & Icon Theme reversed back to and always locked to Ubuntu default

  - by Antonio

  I did set up last year Faience-Ocre as my Icon Theme and Adwaita Cupertino L Unity as my Windows Theme (the GTK+ thme was unchanged to Adwaita (default)). It has worked perfectly well until 3 days ago when starting my PC I saw the Ubuntu default showing up for Windows & Icon Theme. I noticed that at start-up the disk access LED is not lit up continuously as before but at moment stops reading for a few seconds (up to 15 s) then complete the disk reading process. When all was working well this LED would lit up continuously. Another thing is that GNOME applications are as well not working well as previously Nautilus and Gedit now don't use the global menu in the system bar but a local window menu. Nautilus - Nemo before the incident Nautilus - Nemo now ... I did open dconf to check the desktop settings in org-gnome-desktop-wm-preferences and everything is looking good. When I change the settings in the app Advanced Settings in the Theme folder I see the respective value changing in dconf. However, there is no change on my desktop. It looks like it's crippled and GNOME related. [Update 1]: I have the same defect as referenced @ ubuntu theme suddenly changed to default and it's not coming back! instead of my GTK theme I get a classic, Windows-95-like grayish theme ... However one of the solution mentionned: http://www.webupd8.org/2011/06/fix-ubuntu-linux-mint-theme-changing-to.html is not working at all, even for 20 s up to 60 s delay.

  Read the article

• Compiz slow under proprietary nvidia driver

  - by gsedej

  Hi! I am using Ubuntu 10.10 and have problem with proprietary nvidia driver for my GeForce GTS 250. I have issue with poor Compiz performance. And there is also open-source "noueau" driver. Proprietary: I tried many versions but neither works fast on desktop. This means 30 FPS without heavy effects. Currently I am using version 270.18. Even normal desktop use feels bad (moving windows) In games (and 3D benchmark) it is really good! (Unigine Heaven works good!) Open-source "nouveau": Very fast on desktop with heavy effects (blur, ...). I have 300 FPS and more, even in Expo mode. Games were good but not as good as prop. And driver causes xorg to crash even the latest (ppa:xorg-edgers/nouveau), so I switched back to proprietary. I also have computer with Ubuntu 10.04, GeForce 8600GT and drivers around 185.x and Compiz works great there. There is similar question Nvidia proprietary driver performance in 10.10 Which version of nvidia (prop) driver is fast in Compiz in Ubuntu 10.10? How do you install a specific version of nvidia driver? Is it the case that each newer driver works slower on compiz?

  Read the article

• How to connect two ubuntu computers with ethernet cable

  - by Lukasz Zaroda

  I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

  Read the article

• I am trying to set up a ubuntu sever 12.04 on my machine

  - by Jseb

  I am trying to set up a server on my home network which will eventually host rails. I am not great in linux server and i try to follow the prompt. I did succesfully get to a black screen which then prompts me to a username then password to then do anything ( assuming). However here what i try to do I kinda fellow his tutorial http://www.ubuntugeek.com/step-by-step-ubuntu-11-04-natty-lamp-server-setup.html but however the command where not 100% like him not in same order but same idea. Then i want to install ubuntu server with gui here the command i try with sudo apt-get upgrade sudo apt-get install ubuntu-desktop Which however give me the following error Err http... inRelease w Failed to fetch ht... So been ignored if i try the desktop one i get E: unable to locate package ubuntu E: unable to locate package desktop So i am assuming i am not connected to the internet, so i try the following command sudo vi /etc/network/interfaces here the output it gives me and i know my gateway on my laptop is 192.168.1.1 address: 192.168.1.148 netmask: 255.255.255.0 network: 192.168.1.0 broadcasts: 192.168.1.255 gateway: 192.168.1.1 Btw i do not know the command to get out of vi and saving it. Err http://us.archive.ubuntu.com precises InRelease Err http://us.archive.ubuntu.com precises-updates InRelease Err http://us.archive.ubuntu.com precises-backports InRelease Reading package lists... Done W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-updates/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backport/InRelease

  Read the article

• Cinnamon is broken after upgrade to 13.10

  - by user2306488

  I see reports of people with Unity broken after upgrading to 13.10. In my case Unity works fine but cinnamon is broken. It opens the startup applications but no window manager, no menus and the keyboad shortcuts won't work. As a consequence I can't even log out or shut down cleanly. The logs say: Oct 19 10:32:42 Aveline colord: Profile added: icc-1727cc5030c477b20ad75593e757248d Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' exited with code 1 Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' respawning too quickly Oct 19 10:32:43 Aveline gnome-session[9157]: CRITICAL: We failed, but the fail whale is dead. Sorry.... Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' exited with code 1 Oct 19 10:32:46 Aveline whoopsie[1054]: online Oct 19 10:32:53 whoopsie[1054]: last message repeated 12 times Oct 19 10:32:53 Aveline kernel: [ 1982.637049] python[9626]: segfault at 1511 ip b6c9e850 sp bf8d0980 error 4 in libglib-2.0.so.0.3800.0[b6c5b000+102000] Oct 19 10:32:53 Aveline kernel: [ 1982.837527] python[9631]: segfault at 0 ip b6eb13fa sp b69ff848 error 6 in libdbus-1.so.3.7.4[b6e89000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.030271] python[9634]: segfault at a6f4098b ip b6e52389 sp bfcdad68 error 4 in libdbus-1.so.3.7.4[b6e34000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.253259] python[9639]: segfault at 4 ip b6e710f4 sp b69c1bfc error 6 in libdbus-1.so.3.7.4[b6e4b000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.501771] python[9642]: segfault at b4 ip b6e0f076 sp bf82524c error 4 in libdbus-1.so.3.7.4[b6dfd000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.721334] python[9647]: segfault at 4 ip b6eab0f4 sp b69fbbfc error 6 in libdbus-1.so.3.7.4[b6e85000+49000] Any idea?

  Read the article

• Migration of PowerBuilder application to multiplatform

  - by Alex Bibiano

  I developed a client/server application with PowerBuilder in the past for medical clinics and done maintenance for it until now. Now, some clients are asking me to develop a release for Mac/Linux and need some advice about what programming language/technology is best suited for it and the learning curve. It’s not a very very big program but I’m the only developer and have done it in my spare time. PowerBuilder is very productive for this kind of projects (database centric), but it’s not multiplatform and it’s hard to sell PowerBuilder application now days (web, .NET, java sells a lot better with his marketing). My programming skills: - I studied C and C++ in the past (university) but never used it on real projects - Have some Java experience but not in desktop applications - Some experience with Ruby on Rails for web projects - Good skills with PowerBuilder and C# (.NET) (there are my main developing languages) My first dilemma is if I change the desktop application to a web interface, but I think the user will lose some user-experience, and some doctors don’t have a clinic (they are alone at home with my software). I think installing a web application (with webserver) for one user will be overwhelming. If I continue developing desktop application, what is at the moment a good framework/toolset to learn having my skills? Somebody has had similar experiences? A lot of thanks

  Read the article

• How can I add a custom item to the Sound Indicator (and make it clickable more than once)?

  - by con-f-use

  The original question One of the strength of Unity are the various standardized indicators. I want to customize the sound indicator with an additional menu entry that runs a small shell script. I'm not afraid of a little Python code and I hope someone can point me to the right subroutine in the right file. I suspect that will be fairly easy but all the indicators are just so bloated that I can't look through their code in a reasonable time. Any help is appreciated. I know it is possible as the marvelous Skype-Wrapper does it. Edit 2 - Now a dirty DBus hack The one click problem from one edit before has now turned into a DBus problem. Basically we have to tell the sound indicator that our bogus player has terminated now. A dirty hack navigates around that problem: #!/bin/bash # This is '/home/confus/bin/toggleSpeaker.sh' notify-send "Toggle Speaker" "$(date)" qdbus \ com.canonical.indicator.sound \ /org/ayatana/indicator/service \ org.ayatana.indicator.service.Shutdown exit 0 Help from the community is appreciated as I don't have experience any with DBus whatsoever. Edit 1 - Takkat found a solution but only clickable once? For some reason the solution proposed by Takkat has the drawback that the resulting entry in indicator sound can only be clicked once per session. If someone has a fix for, than please comment or answer, you will be upvoted. Here you can see the result: I strongly suspect the issue is related to the .desktop-file in /home/confus/.local/share/application/toggleSpeaker.desktop, which is this: [Desktop Entry] Type=Application Name=toggleSpeaker GenericName=Toggle Speaker Icon=gstreamer-properties Exec=/home/confus/bin/toggleSpeaker.sh Terminal=false And here is a minimal example of the script in /home/confus/bin/toggleSpeaker.sh for your consideration: #!/bin/bash # This is '/home/confus/bin/toggleSpeaker.sh' notify-send "Toggle Speaker" "$(date)" exit 0

  Read the article

• Video game "Gish" will only launch from command line

  - by aberration

  Platform: Lubuntu 11.10 x64 Program: Gish When I try to launch Gish from the command line (/opt/gish/gi.sh), there are no problems. But when I try to launch it from the LXDE menu, it will not start. Contents of /usr/share/applications/gish.desktop: [Desktop Entry] Categories=Game;ActionGame;AdventureGame;ArcadeGame; Exec=/opt/gish/gi.sh Path=/opt/gish Icon=x-gish Terminal=false Type=Application Name=Gish I tried changing Terminal=false to Terminal=true to debug it, but then I just got a blank terminal, and the game didn't start. Edit: Here is some additional information, as requested by Eliah Kagan below: I tried editing /usr/share/applications/gish.desktop, as recommended, but it had no effect However, ~/.xsession-errors contained the following error: [: 8: x86_64: unexpected operator ./gish_32: error while loading shared libraries: libGL.so.1: wrong ELF class: ELFCLASS64 I think there's a problem with the /opt/gish/gi.sh shell script. This is its contents: cd /opt/gish/ MACHINE_TYPE=`uname -m` if [ ${MACHINE_TYPE} == 'x86_64' ]; then ./gish_64 else ./gish_32 fi I'm not too familiar with Bash, so hopefully someone else can point out the error. I have a 64-bit machine. I think that when the script is run from the command line, it's properly launching the 64-bit version (/opt/gish/gish_64), but when it's run from the LXDE menu, it's launching the 32-bit version (/opt/gish/gish_32), which is causing the libGL.so.1 error. However, this may be related to my libGL.so.1 problems with 2 other games.

  Read the article

• Why nautilus quicklist is not working?

  - by jasmines

  None of my bookmarks (Documents, Pictures, Download, Dropbox, Ubuntu One, Music, Public) are correctly shown but they won't open if I right click on the Home icon and select them. The only ones who work are Home and Open A New Window. I've read similar questions (http://askubuntu.com/questions/184504/unity-home-quicklist-not-working-when-nautilus-is-closed and unity home quicklist not working) but my problem seems different... Anyway I can't solve with the suggested workarounds. $ ls ~ Audiobooks Dropbox Modelli Pubblici Video Backup dvdrip-data Musica Scaricati VirtualBox VMs deja-dup grive Pictures - GT-I9100 Scrivania virtual-drives Documenti Immagini Podcasts Ubuntu One Vuze Downloads $ cat /usr/share/applications/nautilus.desktop [Desktop Entry] Name=Files Comment=Access and organize files Exec=nautilus %U Icon=system-file-manager Terminal=false Type=Application StartupNotify=true OnlyShowIn=GNOME;Unity; Categories=GNOME;GTK;Utility;Core; MimeType=inode/directory;application/x-gnome-saved-search; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=nautilus X-GNOME-Bugzilla-Component=general X-GNOME-Bugzilla-Version=3.4.2 Actions=Window; X-Ubuntu-Gettext-Domain=nautilus [Desktop Action Window] Name=Open a New Window Exec=nautilus OnlyShowIn=Unity;

  Read the article

• When running a .jar application with OpenJDK, my keyboard becomes unresponsive?

  - by Mochan

  I recently downloaded a Java application with the .jar format, and had it running on my computer not so long ago. Now that I'm using my desktop instead of laptop temporarily, I want it to run. On my laptop it was a tremendous hassle to get OpenJDK to even run the application without it going black, and now on my desktop I don't have that problem. However, when I run the application, my keyboard becomes unresponsive and doesn't type at all. This is a really big problem because it's demands the use of a keyboard. It works as normal on my laptop though, and it works perfectly. But now on the desktop its completely useless. I don't know if there's like a keyboard driver I'm missing, but there shouldn't be because the keyboard runs flawlessly everywhere else. I'm using OpenJDK 6 because the 7 has the same 'black screen' I mentioned, so I need this to work within OpenJDK 6. Thanks so much in advance and I'll try to specify as many details as I can. M

  Read the article

• Can't (re)install lazarus

  - by twice

  I had Lazarus installed (from website, not USC), while upgrading to 13.10 and after that, it posted some error message (which I can't remember) at every start. I decided it shouldn't suffer, so I started reinstalling it, but it didn't work. then I thought I'll start all over, and deleted and purged everything. But it still would not install. I found a similar, very similar question to mine here: Cant correctly install Lazarus I tried everything said there: sudo dpkg -l | grep "^rc" returned some packages: since sudo apt-get -f brought up the apt-get help message, and sudo apt-get -f install did nothing, I went ahead and manually purged every broken package, which seemed to bring me forward, since it removed the entries in sudo dpkg -l | grep "^rc". When I was done I tried it again, since it didn't work I rebooted, no change. this is the error message I get on the attempt to install the first package (fpc-2.6.2): root@Someone-PC:~# dpkg -i /home/someone/Desktop/fpc_2.6.2-0_amd64\ \(3\).deb (Reading database ... 242209 files and directories currently installed.) Unpacking fpc (from .../fpc_2.6.2-0_amd64 (3).deb) ... dpkg: error processing /home/someone/Desktop/fpc_2.6.2-0_amd64 (3).deb (--install): trying to overwrite '/usr/lib/fpc/2.6.2/msg/errores.msg', which is also in package fp-compiler-2.6.2 2.6.2-5 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /home/someone/Desktop/fpc_2.6.2-0_amd64 (3).deb So, how can I fix this? And install Lazarus?

  Read the article

• Building a linux system

  - by webyankee

  I am worried about hardware compatibility. I have several older PCs with various hardware and wish to install Linux onto them. I have several ideas about what I would like to do. first, I am a novice and know just enough to get me into trouble in a lot of areas. I can not find adequate descriptions of the usage between a desktop and a server version of Linux. When would you want to choose to build a server instead of a desktop and can you change a desktop to a server if you need higher functionality? I wonder if I should use 32 or 64 bit? I believe 32 bit on older (P1 or P2 systems) would be the safe way to go. what is the extent can these systems be used? Can they used to play high end graphics on-line games or just simple browsing and word processing? How do I determine what programs the system can use? I have pondered on the idea of linking several systems together to make one big computer. I know this can be done with some functionality improvement. Any Ideas about this?

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

• dual monitors and unity - ati radeon cards

  - by michiel

  I have a vaio laptop with an ATI Radeon video card and an external screen. I used to run dual monitors on Ubuntu 10.10 fine, but recently decided to upgrade to 11.10 via 11.04 I don't think it's the video card or the fglrx driver. It seems to be unity. When I start up, the laptop screen is normal and the external screen is all white, although I can move my mouse over it. However, the cursor becomes the big X that used to be cursor of the first versions of Xwindows. I can right click on it, and it brings up the context menu for the desktop. And then, all of a sudden, it shows my desktop background. I can continue to move my mouse over the external screen, and now the cursor is normal (little white arrow). But I can't do anything any longer (not even the context menu as before), and trying to drag a window to it (which always worked on 10.10) doesn't work. I actually really like unity. It gives me the most our of my desktop, and uses all space available, which is great. But how can I get my second screen back? I tried unity 2D, but the result is the same. Edit: I think I stumbled on this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/882143

  Read the article

• how to get the update manager window visible?

  - by Max Waterman

  I can see from the launcher that the Update Manager is running - it has the little triangle by it. However, I am having trouble seeing the window. If I click on it from one desktop, it switches to another, so I assume that the Update Manager has its window on that other desktop, but it still doesn't show anything. If I click alt-tab to switch between apps, I can see that the Update Manager is there, but selecting it just shows me a blank screen. Also, when I select it, while still holding the alt-key, I see the top menu bar switch to 'Update Manager', but when I release alt, it changes back to Ubuntu Desktop. It's almost like the app is off the screen somewhere, perhaps with just a single pixel showing or something like that. disclaimer: One thing that might be affecting things is that I have 'focus follows mouse' configured, which makes things a bit funky with the menu not being on the window, where it should be (perhaps there's a way to put it back with the window?) - I like to be able to type into background windows, and manually control which window is in the foreground.

  Read the article

• How to Turn Your Home Ubuntu PC Into a LAMP Web Server

  - by YatriTrivedi

  Got a Linux PC you want to put to work? Maybe you’re not comfortable with the command-line only version of Ubuntu Server Edition. Here’s how to keep the standard Ubuntu desktop and add web-serving capabilities to it. Whether you’re not comfortable with a command-line only system, you’re using your Ubuntu desktop for other things, or you just need it installed for a few particular apps, you can add Apache, MySQL, and PHP to any standard desktop installation of Ubuntu very quickly and easily Latest Features How-To Geek ETC How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition Stylebot Customizes Web Pages in Chrome, Now Has Downloadable Styles Blackberry, Dell, Apple, and Motorola Tablets Compared [Infographic] Encrypt Your Google Search Queries Vintage Posters Showcase the History of Tech Advertising Google Cloud Print Extension Lets You Print Doc/PDF/Txt Files from Web Sites Hack a $10 Flashlight into an Ultra-bright Premium One

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• Ubuntu 13.10 Unity doesn't load after upgrade

  - by William

  Just upgraded to Ubuntu 13.10 only to find that Unity won't load (login freezes, after doing ctrl+alt+F1, logging in and then doing startx, I get a blank desktop and the mouse pointer, and nothing else). I can right click, but the only operations that work are "create new file" and "create new folder". For example, "change desktop background" doesn't work. Also, after doing a few right clicks and choosing "change desktop background", I get a warning message box: "compiz closed unexpectedly." Guest login works fine. Tried creating a new user, but I experience the same thing with the new user. Tried removing all configuration files from my home directory... same thing. Doing dconf reset -f /org/compiz/ gives an error "error spawning command line..." Doing unity --reset also gives errors. Tried uninstalling unity (and compiz) and reinstalling, but that doesn't help. Tried reconfiguring lightdm, didn't help. I don't have any proprietary drivers installed. Once again, the funny thing is that the guest session works fine.

  Read the article

• How to disable the text shadow in plasma widgets KDE 4.6?

  - by piedro

  I just switched completely to Kubuntu for the sake of the more suitable applications for my purposes and their overall integration in the system. But I'm not very happy with all those desktop effects and tranparent looks everywhere. Some things a matter of taste I guess. Some things just unbearable for me having weak eyes. One of them is that about every light theme seems to be using a text shadow effect on the plasma widgets. A white "spilled milk" effect underneath dark text on light grey or glassy background. Drives my eyes nuts! I can remove this effect on the desktop folder by unselecting "shadow" as text effect. I can't find any way to switch it of in the panel and the plasma widgets. My second, related question is, is there a plasma theme matching the oxygen look of the default desktop in light colors that uses the same colors as the ones chosen in the KDE color settings, - simple, opaque, no effects, gnome-like? Plz help someone! thx, piedro

  Read the article

• Move unity launcher to bottom of the screen

  - by argvar

  I have Ubuntu 13.04 DESKTOP version and for some odd reason I'm told that the Unity launcher cannot be moved to the bottom of the screen because of several reasons: 1. Canonical wants it there so it fits with their overall design goals, namely when it comes to touchscreen devices and netbooks. This in my mind totally ignores the fact that most Ubuntu users are DESKTOP users. No matter what Canonicals long term goal is, it surely mustn't be at the expense of needs of their core user base. 2. Most monitors are widescreen, the launcher is more compact where it is. This is not only taking away the users choice, but is also a wrong assessment. Widescreen monitors can sometimes be rotated on a pivot, giving it a portrait aspect. By displaying the Unity launcher on the left side it takes up a lot of space. Many desktop users have multiple monitors, and having the launcher on the left side of each monitor is very awkward. Also, many websites are catered to fit on a half 1920 display, so you can have two browser windows open side-by-side with all content visible. The placement of the Unity launcher takes away the horizontal space meaning there's less room for each browser window, and you'll see the right side of the web pages being occluded. Any suggestion to simply hide the Unity launcher, or "Canonical knows best" or "get used to it" are unwelcome and totally ignores the above points. Linux is about choice. Canonical's stubbornness with the Unity launcher placement is inconsistent with what Linux is about.

  Read the article

• Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

  - by WarriorIng64

  I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

  Read the article

• Workspace Issues on ubuntu 12.10

  - by JaySch

  I'm having the following problem with 12.10 Unity running on a Toshiba A505 16" display laptop using an external 24" Samsung LED monitor (resolution 1920 x 1080 (16:9). Also using the default 2 x 2 workspaces: After powering up the laptop, I Click the Workspace Switcher and the 4 images which represent Workspace 1, Workspace 2, Workspace 3, and Workspace 4 are visible but are in a very elongated, stretched out aspect ratio. Also, any desktop icons placed on the left side of the screen don't show up when I go to full view on any of the 4 workspaces. To resolve this issue, I open up the laptop lid until the video display switches from the external Samsung LED monitor to the internal laptop display, which renders the four workspaces perfectly. I then close the laptop lid and now the workspaces display the correct aspect view; both in the workspace switcher thumbnail view an in full view. I can now see the full desktop, including any desktop icons. Is there a way to configure my system so that Workspaces work properly when the laptop is connected to an external monitor without having to open and close my laptop? Thank you.

  Read the article

• Ubuntu 12.04 menu bar, nautilus, terminal, and gtk themes not working after installation of Gimp 2.8

  - by Chris

  I installed gimp2.8 from this ppa: ppa:otto-kesselgulasch/gimp after that, my system began having problems. This is my thought process in trying to fix what's happened and the order in which it happened: I noticed the menu bar at the top changed from an opaque black to perfectly clear and the titles of applications and the hidden buttons reacted slowly. No big deal, restarted to see if it fixed it. It didn't, in fact, when the logon screen came up, the password field was grey and boxy like a default windows 98 theme (that's the best I can describe it) as were all the option buttons for gtk programs. I open terminal to try and reinstall gtk, but the terminal is just a black screen with no ability to input commands. I go to a tty and I reinstalled gtk3 and gtk2 (I have both on my system. I don't think they're in conflict, they hadn't been before hand). I restarted. Nothing doing. Log in, nautilus isn't placing icons on my desktop. I click the launcher. It flashes, but no window opens. Try to open by Alt+f2, nothing. I purge ubuntu-desktop, restart, reinstall ubuntu-desktop. Nothing. I have no clue what to do at this point so I'm asking for any help diagnosing the problem and fixing it.

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >