keyboard launchers - Page 157

Assembly load and execute issue

- by Jean Carlos Suárez Marranzini

I'm trying to develop Assembly code allowing me to load and execute(by input of the user) 2 other Assembly .EXE programs. I'm having two problems: -I don't seem to be able to assign the pathname to a valid register(Or maybe incorrect syntax) -I need to be able to execute the other program after the first one (could be either) started its execution. This is what I have so far: mov ax,cs ; moving code segment to data segment mov ds,ax mov ah,1h ; here I read from keyboard int 21h mov dl,al cmp al,'1' ; if 1 jump to LOADRUN1 JE LOADRUN1 popf cmp al,'2' ; if 1 jump to LOADRUN2 JE LOADRUN2 popf LOADRUN1: MOV AH,4BH MOV AL,00 LEA DX,[PROGNAME1] ; Not sure if it works INT 21H LOADRUN2: MOV AH,4BH MOV AL,00 LEA DX,[PROGNAME2] ; Not sure if it works INT 21H ; Here I define the bytes containing the pathnames PROGNAME1 db 'C:\Users\Usuario\NASM\Adding.exe',0 PROGNAME2 db 'C:\Users\Usuario\NASM\Substracting.exe',0 I just don't know how start another program by input in the 'parent' program, after one is already executing. Thanks in advance for your help! Any additional information I'll be more than happy to provide. -I'm using NASM 16 bits, Windows 7 32 bits.

Read the article

Unity 3D (with Nvidia driver) becomes very slow and laggy

- by Graham

How can I prevent my Unity 3D desktop from becoming slow after a while, given that I have an Nvidia Quadro NVS 290 graphics in TwinView mode? The desktop starts out fast on login, but becomes slow / lagging / hesitant / high latency after a while, symptoms being spikes in CPU usage by /usr/bin/X whenever I cause any graphical activity with the mouse or keyboard (e.g. typing, changing tabs, dragging windows). The desktop remains slow even with all windows (except htop in Terminal) and extraneous processes killed. Detail: Changing tabs in Terminal takes about a second, and X spikes to 76% CPU. As I type into Firefox, X spikes to 95% CPU. Dragging Termiinal window, X goes to 70% CPU. Basically, every graphical action sends CPU usage of X through the roof. Device: Nvidia Quadro NVS 290 Driver package: binary driver nvidia-current-updates (280.13-0ubuntu5) Dual Monitors: Pair of DELL UltraSharp 1908FP in TwinView (X screen 2560x1024) OS: Fresh install of Ubuntu 11.10 amd64 Desktop with all updates. Hardware: Dell Precision T5400 Workstation Pastebin of Xorg.0.log Pastebin of xorg.conf Pastebin of nvidia-xconfig -t output (easier to read than xorg.conf) Output of /usr/lib/nux/unity_support_test -p: To obtain the following htop screenshow I typed "asdf" several times in in this text box, alt-tabbed to Terminal and took a screenshot of the high X CPU usage. This also happens when firefox is not running: Quadro NVS 290 has "No" thermal sensor according to sensors-detect: Next adapter: NVIDIA i2c adapter 0 at 2:00.0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No P robing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) I tried the nouveau driver by disabling the nvidia-current-updates under Additional Drivers, but Ubuntu and xrandr -q fail to detect the second monitor. This may be issue 737349. Funniest thing is that Nouveau wiki says that XRandR 1.2 dual-monitor is supported so it should work with a second monitor.

Read the article

Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

- by YumYumYum

From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

Read the article

Adding objects to the environment at timed intervals

- by david

I am using an ArrayList to handle objects and at each interval of 120 frames, I am adding a new object of the same type at a random location along the z-axis of 60. The problem is, it doesn't add just 1. It depends on how many are in the list. If I kill the Fox before the time interval when one is supposed to spawn comes, then no Fox will be spawned. If I don't kill any foxes, it grows exponentially. I only want one Fox to be added every 120 frames. This problem never happened before when I created new ones and added them to the environment. Any insights? Here is my code: /**** FOX CLASS ****/ import env3d.EnvObject; import java.util.ArrayList; public class Fox extends Creature { private int frame = 0; public Fox(double x, double y, double z) { super(x, y, z); // Must use the mutator as the fields have private access // in the parent class setTexture("models/fox/fox.png"); setModel("models/fox/fox.obj"); setScale(1.4); } public void move(ArrayList<Creature> creatures, ArrayList<Creature> dead_creatures, ArrayList<Creature> new_creatures) { frame++; setX(getX()-0.2); setRotateY(270); if (frame > 120) { Fox f = new Fox(60, 1, (int)(Math.random()*28)+1); new_creatures.add(f); frame = 0; } for (Creature c : creatures) { if (this.distance(c) < this.getScale()+c.getScale() && c instanceof Tux) { dead_creatures.add(c); } } for (Creature c : creatures) { if (c.getX() < 1 && c instanceof Fox) { dead_creatures.add(c); } } } } import env3d.Env; import java.util.ArrayList; import org.lwjgl.input.Keyboard; /** * A predator and prey simulation. Fox is the predator and Tux is the prey. */ public class Game { private Env env; private boolean finished; private ArrayList<Creature> creatures; private KingTux king; private Snowball ball; private int tuxcounter; private int kills; /** * Constructor for the Game class. It sets up the foxes and tuxes. */ public Game() { // we use a separate ArrayList to keep track of each animal. // our room is 50 x 50. creatures = new ArrayList<Creature>(); for (int i = 0; i < 10; i++) { creatures.add(new Tux((int)(Math.random()*10)+1, 1, (int)(Math.random()*28)+1)); } for (int i = 0; i < 1; i++) { creatures.add(new Fox(60, 1, (int)(Math.random()*28)+1)); } king = new KingTux(25, 1, 35); ball = new Snowball(-400, -400, -400); } /** * Play the game */ public void play() { finished = false; // Create the new environment. Must be done in the same // method as the game loop env = new Env(); // Make the room 50 x 50. env.setRoom(new Room()); // Add all the animals into to the environment for display for (Creature c : creatures) { env.addObject(c); } for (Creature c : creatures) { if (c instanceof Tux) { tuxcounter++; } } env.addObject(king); env.addObject(ball); // Sets up the camera env.setCameraXYZ(30, 50, 55); env.setCameraPitch(-63); // Turn off the default controls env.setDefaultControl(false); // A list to keep track of dead tuxes. ArrayList<Creature> dead_creatures = new ArrayList<Creature>(); ArrayList<Creature> new_creatures = new ArrayList<Creature>(); // The main game loop while (!finished) { if (env.getKey() == 1 || tuxcounter == 0) { finished = true; } env.setDisplayStr("Tuxes: " + tuxcounter, 15, 0); env.setDisplayStr("Kills: " + kills, 140, 0); processInput(); ball.move(); king.check(); // Move each fox and tux. for (Creature c : creatures) { c.move(creatures, dead_creatures, new_creatures); } for (Creature c : creatures) { if (c.distance(ball) < c.getScale()+ball.getScale() && c instanceof Fox) { dead_creatures.add(c); ball.setX(-400); ball.setY(-400); ball.setZ(-400); kills++; } } // Clean up of the dead tuxes. for (Creature c : dead_creatures) { if (c instanceof Tux) { tuxcounter--; } env.removeObject(c); creatures.remove(c); } for (Creature c : new_creatures) { creatures.add(c); env.addObject(c); } // we clear the ArrayList for the next loop. We could create a new one // every loop but that would be very inefficient. dead_creatures.clear(); new_creatures.clear(); // Update display env.advanceOneFrame(); } // Just a little clean up env.exit(); } private void processInput() { int keyDown = env.getKeyDown(); int key = env.getKey(); if (keyDown == 203) { king.setX(king.getX()-1); } else if (keyDown == 205) { king.setX(king.getX()+1); } if (ball.getX() <= -400 && key == Keyboard.KEY_S) { ball.setX(king.getX()); ball.setY(king.getY()); ball.setZ(king.getZ()); } } /** * Main method to launch the program. */ public static void main(String args[]) { (new Game()).play(); } } /**** CREATURE CLASS ****/ /* (Parent class to Tux, Fox, and KingTux) */ import env3d.EnvObject; import java.util.ArrayList; abstract public class Creature extends EnvObject { private int frame; private double rand; /** * Constructor for objects of class Creature */ public Creature(double x, double y, double z) { setX(x); setY(y); setZ(z); setScale(1); rand = Math.random(); } private void randomGenerator() { rand = Math.random(); } public void move(ArrayList<Creature> creatures, ArrayList<Creature> dead_creatures, ArrayList<Creature> new_creatures) { frame++; if (frame > 12) { randomGenerator(); frame = 0; } // if (rand < 0.25) { // setX(getX()+0.3); // setRotateY(90); // } else if (rand < 0.5) { // setX(getX()-0.3); // setRotateY(270); // } else if (rand < 0.75) { // setZ(getZ()+0.3); // setRotateY(0); // } else if (rand < 1) { // setZ(getZ()-0.3); // setRotateY(180); // } if (rand < 0.5) { setRotateY(getRotateY()-7); } else if (rand < 1) { setRotateY(getRotateY()+7); } setX(getX()+Math.sin(Math.toRadians(getRotateY()))*0.5); setZ(getZ()+Math.cos(Math.toRadians(getRotateY()))*0.5); if (getX() < getScale()) setX(getScale()); if (getX() > 50-getScale()) setX(50 - getScale()); if (getZ() < getScale()) setZ(getScale()); if (getZ() > 50-getScale()) setZ(50 - getScale()); // The move method now handles collision detection if (this instanceof Fox) { for (Creature c : creatures) { if (c.distance(this) < c.getScale()+this.getScale() && c instanceof Tux) { dead_creatures.add(c); } } } } } The rest of the classes are a bit trivial to this specific problem.

Read the article

Game Components, Game Managers and Object Properties

- by George Duckett

I'm trying to get my head around component based entity design. My first step was to create various components that could be added to an object. For every component type i had a manager, which would call every component's update function, passing in things like keyboard state etc. as required. The next thing i did was remove the object, and just have each component with an Id. So an object is defined by components having the same Ids. Now, i'm thinking that i don't need a manager for all my components, for example i have a SizeComponent, which just has a Size property). As a result the SizeComponent doesn't have an update method, and the manager's update method does nothing. My first thought was to have an ObjectProperty class which components could query, instead of having them as properties of components. So an object would have a number of ObjectProperty and ObjectComponent. Components would have update logic that queries the object for properties. The manager would manage calling the component's update method. This seems like over-engineering to me, but i don't think i can get rid of the components, because i need a way for the managers to know what objects need what component logic to run (otherwise i'd just remove the component completely and push its update logic into the manager). Is this (having ObjectProperty, ObjectComponent and ComponentManager classes) over-engineering? What would be a good alternative?

Read the article

Fix Google Reader Lag by Blocking Google Plus Button

- by Jason Fitzpatrick

Chrome: Many Google Reader fans have noticed, since the upgrades last month, that the service is unbearably slow. Speed things up by blocking the Google Plus button. Ever since the upgrade from the old Google Reader interface to the new integrated-with-Google-Plus interface, many Google Reader users were reporting a painfully long lag between reading entries in Reader. Previously hitting a keyboard shortcut or arrow button to move you through the new stories was instant with no noticeable lag. After the upgrade a lag of 3-5 seconds per individual story became common (we experienced this annoying lag around the How-To Geek office immediately after the upgrade). One of the theories was that the addition of the Google Plus button to every article was causing memory issues. Geeks Are Sexy tested the theory by blocking this address: plusone.google.com/u/0/_/+1/fastbutton using AdBlock. While people were reporting great success with that move (and you may find it works great too) we didn’t have any luck. What did work for us was installing Chromeblock and, while visiting reader.google.com, clicking on the ChromeBlock toolbar button and blocking Google +1. After that the 3-5 second lag vanished and browsing articles was as snappy as it had been. Hit up the link below to grab a copy of Chromeblock. Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed

Read the article

How Scan any File or Folder Using Windows 8’s Built-in Anti-Virus

- by Taylor Gibb

Windows 8 includes a built-in antivirus solution that runs in the background. You might, however, be surprised that there is no obvious way to scan an item on demand. Here’s how to launch the Windows Defender GUI as well as add a scan option to the context menu. Manually Opening Windows Defender The first way to scan your files is to use the Windows Defender GUI, to do so navigate to: C:\Program Files\Windows Defender Then launch: MSASCui.exe When the GUI opens, choose to do a custom scan, then click the Scan now button. Now choose the folder you want to scan, and then click OK. That’s all there it to it. Scan Using the Context Menu If you don’t fancy opening the GUI, you could always add an option to the context menu. To do so, press the Windows + R keyboard combination to open a run box and type: shell:sendto Then press enter. Now go ahead and download this batch file we wrote, then unzip its contents into the SendTo folder. Now when you right click on a file or folder, you will be able to scan items using the “Send to” menu. Unfortunately it does use the command line scanner, nevertheless it gets the job done. That’s all there is to it. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

Read the article

How to Disable Caps Lock Key in Windows 7 or Vista

- by The Geek

The caps lock key is one of those remnants of another age of computers, back when people used to shout at each other more often. Unless you’re in the accounting department, it’s probably not very useful, so today we’ll learn how to disable it. If you’re using Mac OS X instead, you can follow our guide on how to disable Caps Lock in OS X using a registry hack, or you can map any key to any key if you really want to. Note: This article was originally published years ago, but we’ve updated it and are republishing for everybody that might not have seen it. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Natural Wood Grain Icons for Your Desktop and App Launcher Docks My Blackberry Is Not Working! The Apple Too?! [Funny Video] Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster World of Warcraft Theme for Windows 7 Ubuntu Font Family Now Available for Download

Read the article

Not Happy With the Monochrome Visual Studio 11 Beta UI

- by Ken Cox [MVP]

I can’t wait for a third-party to come out with tools to return some colour to the flat, monochrome look of Visual Studio 11 (beta). What bugs me most are the icons. I feel like a newbie when I have to squint and analyze the shape of icons on the debugging toolbar just to get the one I want. (Fortunately, the meddlers didn’t mess with the keyboard commands so I’m not totally lost.) Not sure what usability studies told MS that bland is better. Maybe it is for most people, but not for me. Gray, shades of gray and black. Ugh. And don’t get me started on the stupidity of using all-caps for window titles. Who approved that? I see that there’s a UserVoice poll on the topic (http://visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2623017-add-some-color-to-visual-studio-11-beta) but I doubt that anything will change Microsoft’s opinion in time for the release. Once a product gets to a stable beta, most non-crashing stuff gets pushed to the next version. I hope I’m proved wrong. Fortunately, Visual Studio is quite customizable. Unless ‘Bland’ is hard-coded, some registry tweaks and a collection of replacement icons should allow dissenters like me back to productivity. BTW, other than hating the UI, VS 11 beta is working quite well for me on a .NET 4 project.Note: Although my username for the ASP.NET domain includes the letters "[MVP]", I'm no longer an MVP. Apparently it's nearly impossible to change a username in the system. My apologies for the misleading identifier but I tried to have it changed without success.

Read the article

How to Create a Minimize All Windows (Win + M) Hotkey for Mac OS X

- by The Geek

Windows users have been able to minimize every window on their desktop ever since keyboards with the Win key started showing up — just tap WIN + M on your keyboard, and every window is minimized. For Mac OS X, it’s not quite as simple. You can, of course, use the CMD + OPT + H + M shortcut key combination to hide most windows… but that’s a lot of keys to hit at once, and it doesn’t always minimize everything in my experience. So like everything else I wanted from Windows, it was time to figure out how to get it on OS X as well. This method uses QuickSilver to provide the shortcut key trigger — if there’s a better way to do that, please let us know. Luckily OS X includes a nice scripting platform, and we can use the following script from a helpful person over at SuperUser to make this all happen. tell application "Finder" to activate tell application "System Events" tell application process "Finder" tell menu bar 1 click menu item "Hide Others" of menu of menu bar item "Finder" click menu item "Minimize All" of menu of menu bar item "Window" end tell end tell end tell Open up a new AppleScript Editor window and paste in the script from above. Then go to File and Save.

Read the article

Notes for a NetBeans IDE 7.4 HTML5 Screencast

- by Geertjan

I'm making a screencast that intends to thoroughly introduce NetBeans IDE 7.4 as a tool for HTML, JavaScript, and CSS developers. Here's the current outline, additions and other suggestions are welcome. Getting Started Downloading NetBeans IDE for HTML5 and PHP Examining the NetBeans installation directory, especially netbeans.conf Examining the NetBeans user directory Command line options for starting NetBeans IDE Exploring NetBeans IDE Menus and toolbars Versioning tools Options Window Go through whole Options window Change look and feels Adding themes Syntax coloring Code templates Plugin Manager and Plugin Portal Dark Look and Feel Themes Toggle line wrap Emmet HTML Tidy NetBeans Cheat Sheets Creating HTML5 projects From scratch From online template, e.g., Twitter Bootstrap From ZIP file From folder on disk From sample Editing Useful shortcuts Alt-Enter: see the current hints Alt-Shift-DOT/COMMA: expand selection (CTRL instead of Alt on Mac) Ctrl-Shift-Up/Down: copy up/down Alt-Shift-Up/Down: move up/down Alt-Insert: generate code (Lorum Ipsum) View menu | Show Non-printable Characters Source menu Show keyboard shortcut card Useful hints Surround with Tag Remove Surrounding Tag Useful code completion Link tag for CSS, show completion Script tag for JavaScript, show completion Create code templates in Options window Useful HTML Palette items Unordered List Link Useful code navigation Navigator Navigate menu Useful project settings Project-level deployment settings CSS Preprocessors (SASS/LESS) Cordova support Useful window management Dragging, minimizing, undocking Ctrl-Shift-Enter: distraction-free mode Alt-Shift Enter: maximization Debugging JavaScript debugger Deploying Embedded browser Responsive design Inspect in NetBeans mode Chrome browser with NetBeans plugin Android and iOS browsers Cordova makes native packages On device debugging On device styling Documentation PHP and HTML5 Learning Trail: https://netbeans.org/kb/trails/php.html Contributing Social Media: Twitter, Facebook, blogs Plugin Portal Planning to complete the above screencast this week, will continue editing this page as more useful features arise in my mind or hopefully in the comments in this blog entry!

Read the article

Everytime i am trying to connect to my box using SSH, its failing not connecting

- by YumYumYum

From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

Read the article

Apache Server-Side Includes Refuse to Work (Tried everything in the docs but still no joy)

- by raindog308

Trying to get apache server-side includes to work. Really simple - just want to include a footer on each page. Apache 2.2: # ./httpd -v Server version: Apache/2.2.21 (Unix) Server built: Dec 4 2011 18:24:53 Cpanel::Easy::Apache v3.7.2 rev9999 mod_include is compiled in: # /usr/local/apache/bin/httpd -l | grep mod_include mod_include.c And it's in httpd.conf: # grep shtml httpd.conf AddType text/html .shtml DirectoryIndex index.html.var index.htm index.html index.shtml index.xhtml index.wml index.perl index.pl index.plx index.ppl index.cgi index.jsp index.js index.jp index.php4 index.php3 index.php index.phtml default.htm default.html home.htm index.php5 Default.html Default.htm home.html AddHandler server-parsed .shtml AddType text/html .shtml In the web directory I created a .htaccess with Options +Includes And then in the document, I have: <h1>next should be the include</h1>  <h1>include done</h1> And I see nothing in between those headers. Tried file=, also with/without absolute path. Is there something else I'm missing? I see the same thing on another unrelated server (more or less stock CentOS 6), so I suspect the problem is between keyboard and chair...

Read the article

Start Debugging in Visual Studio

- by Daniel Moth

Every developer is familiar with hitting F5 and debugging their application, which starts their app with the Visual Studio debugger attached from the start (instead of attaching later). This is one way to achieve step 1 of the Live Debugging process. Hitting F5, F11, Ctrl+F10 and the other ways to start the process under the debugger is covered in this MSDN "How To". The way you configure the debugging experience, before you hit F5, is by selecting the "Project" and then the "Properties" menu (Alt+F7 on my keyboard bindings). Dependent on your project type there are different options, but if you browse to the Debug (or Debugging) node in the properties page you'll have a way to select local or remote machine debugging, what debug engines to use, command line arguments to use during debugging etc. Currently the .NET and C++ project systems are different, but one would hope that one day they would be unified to use the same mechanism and UI (I don't work on that product team so I have no knowledge of whether that is a goal or if it will ever happen). Personally I like the C++ one better, here is what it looks like (and it is described on this MSDN page): If you were following along in the "Attach to Process" blog post, the equivalent to the "Select Code Type" dialog is the "Debugger Type" dropdown: that is how you change the debug engine. Some of the debugger properties options appear on the standard toolbar in VS. With Visual Studio 11, the Debug Type option has been added to the toolbar If you don't see that in your installation, customize the toolbar to show it - VS 11 tends to be conservative in what you see by default, especially for the non-C++ Visual Studio profiles. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

What You Said: How Do You Sync Your Files Between Your Devices?

- by Jason Fitzpatrick

Earlier this week we asked you to share your tricks and techniques for keeping files synced between your different devices. Now we’re back to highlight how you do it. Overwhelmingly, you do it with Dropbox. Despite the proliferation of different platforms there has been little inroads made into any sort of universal syncing. We heard from quite a few different readers and by far the most popular option was to use Dropbox to ensure that you could get the music and documents you wanted whether you were on your desktop, laptop, netbook, iPhone, or Android device. In the same breath however, nearly all of your added on an additional service. The real message, it would seem, is that there simply isn’t a service good enough to meet all of the needs most users have, all of the time. The most common response to our Ask the Readers question was “Dropbox and…”; this pattern is illustrated nicely in the following quotes. Kim writes: Dropbox for all kinds of things. (Would also use Sugarsync, but it doesn’t support Linux.) Lastpass for passwords. Xmarks for bookmarks, although I’m going to try Firefox Sync soon. Evernote for things like shell commands I might want someday. Google Beta for music, once I get it uploaded. I have an Amazon account too, but Google gives you more space. Gmail. Michael finds himself in a similar situation and writes: How to Make and Install an Electric Outlet in a Cabinet or DeskHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

Read the article

Pen drive cannot be mounted

- by DUKE

I get the following message when I insert my pen drive to USB port. I am unable to format it as well. (This pen drive earlier used as a bootable drive for Ubuntu 12.04) I am using Ubuntu 12.04 LTS. lsusb command in the terminal gives the following message: siva@siva:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 004: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 002 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 007: ID 05ac:8281 Apple, Inc. Bus 001 Device 008: ID 0951:1653 Kingston Technology

Read the article

Can't configure Bluetooth drivers for mac mini 4,1

- by t0dbld

upon following the instructions on thread for mac mini leading to me to a thread for a fix for BlueTooth, i follow the instructions (even they are for other Mac's) i get it to fire up and combined with hcitool i managed to connect my apple track pad and keyboard... how ever upon reboot im back to bluetooth telling me there are no drivers nothing works, yet all the files are still there? This is driving me nuts and i caant figure out what i could be doing do you have any ideas what would make this happen ? lsusb results Bus 004 Device 007: ID 05ac:8218 Apple, Inc. Bus 004 Device 006: ID 05ac:820b Apple, Inc. Bus 004 Device 005: ID 05ac:820a Apple, Inc. Bus 004 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 004 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 004 Device 002: ID 03f0:1c24 Hewlett-Packard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 054c:031f Sony Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Read the article

How to set acpi=off for installation?

- by Johan Helgø

I'm trying to install Ubuntu 12.04 LTS 64bit from a USB created in Windows using the recommended software from pendrivelinux. The USB is tested on two laptops and works fine. The install does not work on my desktop PC, it either hangs with lots of text on the screen, or it just gives me a screen with garbled colors. Right now it hangs on "[3.925311] Initializing USB Mass Storage driver...", but it hangs on different spots every time I try. I know that acpi=off will fix this. On older versions, there used to be a pink screen with the icon of a keyboard, at that screen I could press ESC, and I would then get a long list of languages, I could choose English, and then I would get options for setting acpi=off, then install without any problems. This new install menu does not have those options. The (now black and white) "Installer boot menu"'s advanced options is blank. There simply are no advanced options. If I go to help, then press F6, I get to a help screen describing the different boot parameters. I see examples of writing "Install acpi=off" However, writing "install acpi=off" it gives an error saying "could not find kernel image: install". How can I install Ubuntu 12.04 with acpi=off? (Oh, btw, nothing happens if I press F6 in the "Installer boot menu")

Read the article

AutoHotkey cannot interact with Windows 8 Windows…or can it!

- by deadlydog

If you’ve installed Windows 8 and are trying to use AutoHotkey (AHK) to interact with some of the Winodws 8 Windows (such as the Control Panel for example), or with apps that need to be Ran As Administrator, then you’ve likely become very frustrated as I did to discover that AHK can not send any commands (keyboard or mouse input) to these windows. This was a huge concern as I often need to run Visual Studio as an administrator and wanted my hotkeys and hotstrings to work in Visual Studio. After a day of fighting I finally realized the answer (and it’s pretty obvious once you think about it). If you want AHK to be able to interact with Windows 8 Windows or apps running as administrator, then you also need to have your AHK script Run As Administrator. If you are like me then you probably have your AHK scripts set to run automatically at login, which means you don’t have the opportunity to right-click on the script and manually tell it to Run As Administrator. Luckily the work around is simple. First, if you want to have your AHK script (or any program for that matter) run when you log in, create a shortcut to the application and place the shortcut in: C:\Users\[User Name]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup Note that you will need to replace “[User Name]” with your username, and that “AppData” is a hidden folder so you’ll need to turn on viewing hidden folders to see it. So by placing that shortcut there Windows will automatically run your script when you log on. Now, to get it to run as an administrator by default, right-click on the shortcut and go to Properties. Under the Shortcut tab, click on the “Advanced…” button and check off “Run as administrator”. That’s it. Now when you log onto Windows your script will automatically start up, running as an administrator; allowing it to interact with any application and window like you had expected it to in the first place. Happy coding!

Read the article

Black Screen after Resume from Sleep (Kubuntu)

- by user20271

I know there is a lot of other posts like this, but I have been looking for hours and I still haven't found any solution. I have recently installed Kubuntu Linux along side my Windows 7, the sleep on my Win7 works fine and resumes like normal. When I am loaded into Kubuntu, and I put my laptop to sleep, it goes into sleep as normal. When I go to RESUME from the sleep, the screen stays solid black, it doesn't light up, no blinking curser or anything. The Wi-Fi light is 'off' (orange) and I cannot turn it on. The Caps lock and the Num lock lights on the keyboard blink slowly. I hear something on the inside of the computer start to spin. I am not very experienced with Kubuntu/Linux, but I do know a bunch of computer terminology, I am still far from an expert though. I have about 300GB designated to my Win7 stuff, and another partition with about 100GB for my Kubuntu Linux. My computers specs are as follows: Windows 7 64-bit I have the most recent version of Kubuntu because I just downloaded it a few days ago and updated it yesterday. AMD Athlon Duel-Core processor 4GB of RAM And it is a HP G61 Laptop

Read the article

Is an ACPI GPE storm normal in an Ubuntu session?

- by Tinellus

In a previous question (What is a an ACPI GPE storm?), I asked about ACPI GPE storm. Looking closer to my kern.log file in /var/log/, I notice that in every session at some point (usually withing 20' after startup) a GPE storm is triggered. When I open kern.log immediately after startup, I see that the 'GPE-storm' can be triggered by anything (a copy-action, the opening of an app like Firefox or Thunderbird, etc...). This worries me. Looking for other ACPI related events in kern.log, I find these error messages. I hope someone can give some advice: Jun 10 16:33:20 Guy-VAIO kernel: [ 0.724505] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it Jun 10 16:33:20 Guy-VAIO kernel: [ 0.795205] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Jun 10 16:33:20 Guy-VAIO kernel: [ 1.024009] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Jun 10 16:33:20 Guy-VAIO kernel: [ 23.140259] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS There's also a video driver message that worries me, don't know if it's related though: Jun 10 16:33:20 Guy-VAIO kernel: [ 23.162154] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Jun 10 16:33:20 Guy-VAIO kernel: [ 23.162158] Disabling lock debugging due to kernel taint As mentioned in my previous question, I'm experiencing frequent (several times /d) application crashes, that seem random, with apport messages being sent, and less frequent (once a week or so) complete system freezes where the system becomes unresponsive to keyboard, mouse or touchpad input and the only solution is a hard reboot (press start button) My questions: what about the Firmware Bugs in ACPI? how and where do I have to 'clear CONFIG_ACPI_PROCFS_POWER'? what does it mean when fglrx 'taints the kernel', is it serious and what could I do about it? Ubuntu 12.04, 64-bit, 3.2.0-25-generic Kernel, Intel® Core™ i5-2430M CPU @ 2.40GHz × 4 Thanks

Read the article

Run a startup script with lightdm

- by cheshirekow

I have a tablet PC and the graphics driver doesn't support xrandr, so in order to rotate the screen I run a script which changes the Xorg.conf file and then restarts lightdm. I also have a script which uses xsetwacom and xinput to change the rotation of the input devices so that the match the new orientation. I've learned how to get the script to run when I login, but I'd like it to run before I login, so that I don't have to enable auto-login with lightdm. I do need it to run though, or the input (touch and pen) is rotated with respect to the screen, so that when I touch the screen the input is in a completely different area, making it really difficult to use the onscreen keyboard. I've looked at other questions on this site. I've tried putting my script in /etc/Xsession.d but that didn't seem to work. I also tried putting it in /etc/rc.local but I think that is the wrong place, nothing seems to happen. I've also tried googling for lightm script hooks, and various other google terms. Any suggestions? Edit 1: After doing some research, it seems to me that it might not be that I want to run a script with lightdm, but rather with the lighdm greeter (in this case, I think the unity-greeter?). Are there any script-hooks for the unity-greeter?

Read the article

How do you avoid jumping to a solution when under pressure? [closed]

- by GlenPeterson

When under a particularly strict programming deadline (like an hour), if I panic at all, my tendency is to jump into coding without a real plan and hope I figure it out as I go along. Given enough time, this can work, but in an interview it's been pretty unsuccessful, if not downright counter-productive. I'm not always comfortable sitting there thinking while the clock ticks away. Is there a checklist or are there techniques to recognize when you understand the problem well enough to start coding? Maybe don't touch the keyboard for the first 5-10 minutes of the problem? At what point do you give up and code a brute-force solution with the hope of reasoning out a better solution later? A related follow-up question might be, "How do you ensure that you are solving the right problem?" Or "When is it most productive to think and design more vs. code some experiments to and figure out the design later?" EDIT: One close vote already, but I'm not sure why. I wrote this in the first person, but I doubt I'm the only programmer to ever choke in an interview. Here is a list of techniques for taking a math test and another for taking an oral exam. Maybe I'm not expressing myself well, but I'm asking if there is a similar list of techniques for handling a programming problem under pressure?

Read the article

connecting to freenx server : configuration error

- by Sandeep

I am not able to pin point what is missing. I have configured freenx-server (useradd, passwd etc). However, server drops the connection after authentication. Please note my server is ubuntu 10.04 and client recent version. Below is the error log NX> 203 NXSSH running with pid: 6016 NX> 285 Enabling check on switch command NX> 285 Enabling skip of SSH config files NX> 285 Setting the preferred NX options NX> 200 Connected to address: 192.168.2.2 on port: 22 NX> 202 Authenticating user: nx NX> 208 Using auth method: publickey HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.5.0) NX> 105 hello NXCLIENT - Version 3.2.0 NX> 134 Accepted protocol: 3.2.0 NX> 105 SET SHELL_MODE SHELL NX> 105 SET AUTH_MODE PASSWORD NX> 105 login NX> 101 User: sandeep NX> 102 Password: NX> 103 Welcome to: ubuntu user: sandeep NX> 105 listsession --user="sandeep" --status="suspended,running" --geometry="1366x768x24+render" --type="unix-gnome" NX> 127 Sessions list of user 'sandeep' for reconnect: Display Type Session ID Options Depth Screen Status Session Name ------- ---------------- -------------------------------- -------- ----- -------------- ----------- ------------------------------ NX> 148 Server capacity: not reached for user: sandeep NX> 105 startsession --link="lan" --backingstore="1" --encryption="1" --cache="16M" --images="64M" --shmem="1" --shpix="1" --strict="0" --composite="1" --media="0" --session="t" --type="unix-gnome" --geometry="1366x768" --client="linux" --keyboard="pc105/us" --screeninfo="1366x768x24+render" ssh_exchange_identification: Connection closed by remote host NX> 280 Exiting on signal: 15

Search Results

Search found 4957 results on 199 pages for 'keyboard launchers'.

Page 157/199 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164 | Next Page >

- by Jean Carlos Suárez Marranzini

- by Graham

- by YumYumYum

- by david

- by George Duckett

- by Jason Fitzpatrick

- by Taylor Gibb

- by Bob Rhubart

- by The Geek

- by Ken Cox [MVP]

- by The Geek

- by Geertjan

- by YumYumYum

- by raindog308

- by Daniel Moth

- by Jason Fitzpatrick

- by DUKE

- by t0dbld

- by Johan Helgø

- by deadlydog

- by user20271

- by Tinellus

- by cheshirekow

- by GlenPeterson

- by Sandeep

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164 | Next Page >