Search Results

Search found 14111 results on 565 pages for 'virtual machines'.

Page 157/565 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Offloading backups to secondary network

  - by user1467163

  I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

  Read the article

• 2012 R2 services will not start after promotion to Domain Controller

  - by Cybersylum

  Having a peculiar issue promoting a Windows 2012 R2 server in a domain at 2003 domain/forest functional level. Built a new 2012 R2 server, added the following software (labtech, appassure, eset A/V, & Teamviewer). It activated and appeared to be working fine. I added the Active Directory Domain Services role, and completed the configuration (Domain/Forest Prep, and DC promotion). All appeared to go well. I rebooted the server, and that's where the peculiar stuff began. I noticed the server indicated it needed activated again; but would not accept the key. I verified the key was good. That's when I noticed the Software Protection service (as well as many other core services - Base Filtering engine, DHCP client, firewall, etc) would not start. The error message for all of them was "Access Denied". I called MS, and they wanted to troubleshoot at a service level. Their fix was to use procmon and identify the resource that needed permissions (registry key, file or folder) and add "everyone" with full control). That got the services to start; but the problem re-appeared after a reboot. Thinking the issue might have been with the anti-virus package during the promotion process, I rebuilt the DCs from scratch and removed the metadata from AD (as I could not demote the machines "rpc server unavailble"). I tried to promote the newly built machines again. The only changes to the brand new machines being critical updates. Again the promotion appeared to work fine; but upon reboot (and a long wait to allow replication to occur) similar problems began to re-appear. I have verified that the schema updates are correct (schema version is 69 - for Windows 2012 R2). I am not finding much about this issue through my own searches, so I thought I would post this to see if anyone else has seen anything similar...

  Read the article

• How do I start the Workstation Service so I can use `net use`?

  - by nitefrog

  I have a Windows 7 machine that logs into a domain. The machine can net view and see the different shares, but when I try to use, net use * \\name\share, I get an error stating that the service is not started. Yet when I issue a net start, it states the service is already started. My other win7 machines work fine; they can see and use any of the shares. Is there a security setting that needs to be disabled or enabled? I really need to get this working, and I have no other ideas as the other machines have no problem accessing the shares on different systems. The error I am getting is , "The Workstation Service Has Not Been Started", but like I said other machines can connect fine, and when I issue a, "net start workstation", it states the service is already started. In addition the error number I am receiving is 2138. UPDATE: On the machine that is having issues. From the troubled machine if I issue a Net View \\name I can see all the shares on the machine I want to connect to. When I try to net use * \\name\sharename I get the error The Workstation service has not started. I have set both settings sc config lanmanworkstation start = auto and sc config lanmanserver start = auto on the Windows7 computer that is having issues. I have rebooted the computer and still no dice. I can net view any computer on the network and see all shares, but I cannot access any of the shares in which I can see. In the registry under the HKLM\System\CurrentControlSet\Services Both LanmanServer and LanmanWorkstation start is set to 2. Screen capture of net use and view: The Services: This is really weird. What am I missing? It has to be a security setting...

  Read the article

• VMware Workstation Bridged Network Host UnReachable

  - by user2097818

  VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

  Read the article

• How to disable Utility Manager (Windows Key + U)

  - by Skizz

  How do I disable the Windows + U hotkey in Windows XP? Alternatively, how do I stop the utility manager from being active? The two are related. The utilty manager is currently providing a potential security hole and I need to remove it[1]. The system I'm developing uses a custom Gina to log in and start a custom shell. This removes most Windows Key hotkeys but the Win + U still pops up the manager app. Update: Things I've tried and don't work: NoWinKeys registry setting - this only affects explorer hotkeys; Renaming utilman.exe - program reappears next login; Third party software - not really an option, these machines are audited by the clients and additional, third party software would be unlikely to be accepted. Also, the proedure needs to be reasonably straightforward - this has to be done by field service engineers to existing machines (machines currently in Russia, Holland, France, Spain, Ireland and USA). [1] The hole is via the internet options in the help viewer the utility app links to.

  Read the article

• Strange File-Server I/O Spikes - What Is Causing This?

  - by CruftRemover

  I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Servers - Buying New vs Buying Second-hand

  - by Django Reinhardt

  We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

  Read the article

• As an admin, what tools do you use to log what you do to your boxes?

  - by Jerry

  I am more of a linux applications developer than an admin. Over time, I've built servers and maintained them, sometimes to offer services, mostly just to develop the applications I work on. Way back when I would create a file in my account to keep notes on what I did on each machine, so that I could replicate that when I migrated to other machines. Nowadays, I install something a private trac installation, install it's blog plugin, and then use that to make notes of everything I install, and most commands that I run, as well as the output. This provides me a combination wiki and blog that I find very useful as a "captain's log". I do this mostly so that when I migrate to a new clean machine, I have a much easier time in bringing it up. And yet, I am always amazed when I see others just install this, delete that, run this, setup this config, ... without seeming to use any way to actually note what they are doing. What do YOU do, and what tools are available? I am especially interested in the transition between maintaining a few machines for a few people and maintaining several to dozens of machines providing a real service. What are the best practices, and where can I find good resources? Thanks!

  Read the article

• One Way Sync with Dropbox?

  - by user244805

  Is there any way I can mirror a dropbox folder to my C drive by just running a portable file? Extra background information because I know you guys hate it when you don't get the entire situation: I go back to University in fall and I need a new storage solution. I decided to use DropBox to sync my tiny University files (< 5 MB). I need to access these files from 4 machines: Windows 7 Home machine Windows 7 University A machine Windows 7 University B machine Android tablet 1 and 4 are a non-issue. The problem lies with 2 and 3. I want to be able to edit my files on 2 and 3 but those machines are not mine. There is an easy fix. Run a portable version of the DropBox syncer on a USB drive. But the problem is that I don't want to carry a USB drive around with me all the time. In that case, I can just run the small portable DropBox syncer off the internet. But where will it to store the files? A temporary directory on the C drive. There is only one issue left: there are hundreds of machines that I will randomly use that fit in categories 2 and 3. My portable DropBox syncer will notice that the temporary directory is empty on each new PC I use and instead of downloading my DropBox folder to the machine, it syncs the other way around i.e. it deletes my entire DropBox. The solution is to mirror my DropBox onto the temporary directory before running the DropBox syncer.

  Read the article

• Remote reboot of windows to knoppix

  - by user64452

  I am attempting to develop an Auditing application. This audit application will be employed on windows networks. The Audit will need to discover Hardware and software details of all machines attached to the network (including Printers) I do not want to have to install this application on each workstation. The audit app. needs to discover all the ip addresses of all the networked workstations. I have been prototyping this app for the last couple of months and have decided to try a new tack Is this possible? a). You have a windows network, min Windows XP sp3 and upwards b). Maximum of 100 Networked machines (if that matters) c). I need to remotely reboot each WINDOWS machine in turn on the entire network and get it to startup using UNIX, say knoppix for example! d). however the knoppix live cd is only available from one of the networked machines Questions... Morphology? Longevity? Incept dates? Cheers DD

  Read the article

• How do I connect remotely to SQL Server from Windows client?

  - by humble_coder

  Hi All, Having a bit of an issue connecting to SQL SERVER remotely from Windows. I've verified that all of my settings are correct via SQL SERVER MANAGEMENT STUDIO EXPRESS and SQL SERVER CONFIGURATION MANAGER. I can connect remotely using ODBC drivers from other OSes (e.g. OS X, Linux, etc). However, when I connect with the same credentials from a remote Windows machine using "SQL SERVER" as the driver I am told that the system cannot connect. I've tried creating an ODBC Data Source and I get the same error: Connection failed: SQLState: '01000' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(InvalidInstance()). Connection failed: SQLState: '08001' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Invalid Connection From the non-windows machines I can use the IP address of the SQL Server just fine. However, on the remote Windows machine, neither IP address nor named instance works. FYI, I can create an ODBC Data Source using the named instance on the machine actually running the SQL Server (but this is, of course, nothing special -- just proof that it isn't completely hosed). One interesting note: If I use SQL STUDIO 2005 from a Windows client machine, I can use the IP address to connect remotely. Still, the whole reason I bring this up is because I need to use a software package I've written to connect to SQL Server remotely from Windows machines as well. Previously the solution was only needed to xfer data from SQL Server into a PostGRES or MySQL database on non-Windows machines (due to DBA preference). However, now they also want to move the data from the legacy software to MySQL even on Windows. Any assistance would be most appreciated. Feel free to provide a full example connection string. Best

  Read the article

• Which components should I invest in.. for a backup machine.

  - by Senthil

  I am a freelance developer. I have a PC, a laptop and an old testing and file server machine. I might add one or two in future. I want to have an on-site backup machine that can handle backups of ALL these machines - file backups, MySQL backups, backup of subversion repository, etc.. When building the machine, which components should I invest more in? Examples: The cabinet should have lots of room for expansion. Hard disk size should be large. But I guess hard disk speed need not be high (?) But other components like, RAM, PSU, Processor, Network card, Cooling, etc.. how much relative importance do these have in a backup machine? Which of these components should be high-end or large, and which ones need not be? Some Idea of the load: There will TBs of data. File backups and subversion repository backups will at least be done daily. MySQL backups done weekly. assume 3 machines at the moment and somewhere around 10 machines in the future.

  Read the article

• How do I fully share a Hard Drive on my Local Network?

  - by GingerLee

  I have 4 computers connected to a router (DD-WRT) My main PC is Windows 7 (Home Premium). This machine has 2 Hard Disks: HD1 is used for my OS and the other (HD2) is used to store files. My 3 other machines are 1. Ubuntu Destop that I use to learn about linux, 2. A Mac OSX laptop, and 3. A netbook running windows 7. How do I easily share HD2 with my other machines? I would like all my machines to have full access & permissions to HD2 however I would like to RESTRICT access to only PCs that are connected to my router (either via LAN and WiFi) --- btw, I know this is not very secure due to WiFi vulnerability , however, I currently MAC address restrict WiFi connections my router. Extra Info: I have already tried to use the Windows Folder Sharing feature: i.e. I right click over the icon of HD2, and click on the Sharing Tab, but in sub-window labeled "Network File and Folder Sharing", the "Share" button is grayed out. I can click on "Advanced Shared" but that just takes me to a screen in which I have to set certain permissions. What is not clear to me is: How do I set a criteria that shares HD2 with all computer connected to my router?

  Read the article

• How does KMS (Windows Server 2008 R2) differentiate clients?

  - by Joe Taylor

  I have recently installed a KMS Server in our domain and deployed 75 new Windows 7 machines using an image I made using Acronis True Image. There are 2 variations of this image rolled out currently. When I go to activate the machines it returns that the KMS count is not sufficient. On the server with a slmgr /dlv it shows: Key Management Service is enabled on this machine. Current count: 2 Listening on Port: 1688 DNS publishing enabled KMS Priority: Normal KMS cumulative requests received from clients: 366 Failed requests received: 2 Requests with License status unlicensed: 0 Requests with License status licensed: 0 Requests with License status Initial Grace period: 1 Requests with License statusLicense expired or hardware out of tolerance: 0 Requests with License status Non genuine grace period: 0 Requests with License status Notification: 363 Is it to do with the fact that I've used the same image for all the PC's? If so how do I get round this. Would changing the SID help? OK knowing I've been thick whats the best way to rectify the situation. Can I sysprep the machines to OOBE on each individual machine? Or would NewSID work?

  Read the article

• Can my employer force me to backup my personal machine? [closed]

  - by Eric B

  Here's the background: Approximately 1.25 years ago, the company I work for was acquired by a larger 400 person company. Before acquisition (and today still) we are all remote employees using our own personal hardware for work-related duties (coding, email, etc). We are approximately 15 employees within the larger organization. Some time after acquisition, the now owning company was slapped with a civil lawsuit. Part of this lawsuit (discovery) is requiring them to retrieve & store from us any related information. Because we were a separate company up until acquisition, there is a high probability that our personal machines might contain information about what the lawsuit alleges (email, documents, chat logs?, etc). Obviously, this depends largely on the person's job function (engineer vs. customer support vs. CEO). All employees are being required to comply. Since acquisition (1.25 yrs), the new company has not provided us with company laptops/desktops. We continue to use personal hardware, licenses, etc for work. Email is via POP3s and not hanging around on the mail server - it's on everyone's client. Documents are spread across personal machines. So, now they want us each to backup our complete personal machines. They are allowing us to create a "personal" folder where we can place personal documents. That single folder will be excluded from backup. Of course, that means total re-arrangement of documents, etc. For most of us, 99% of the data on the machine is NOT related to work. So, what's the consensus? Should we comply? What is their recourse if we do not?

  Read the article

• How to "open" existing VMs in Hyper-V without importing them?

  - by Borek

  I had a PC with two physical disks: C: containing the host operating system D: containing a folder D:\VMs where all my virtual machines were stored Now, the C: disk died. I bought a new one, reinstalled Windows on it, enabled Hyper-V feature and now I just need to open the VMs from the D:\VMs folder. However, I don't seem to be able to find a menu item or anything that would allow me to do that - the only thing I see is the "import" command which unfortunately requires the VMs to be explicitly exported (my machines weren't). I firmly believe that when I have all the files constituting a VM (the VHD file, some XML files describing the settings etc.) it must be somehow possible to just "open" these existing VMs in Hyper-V, right? What command am I missing? Edit: I know I can create a blank virtual machines and then just point them to use existing VHDs. However, I am not sure about all the different settings I've made to those VMs so I hope there's a way to simply open those existing VMs instead of recreating them.

  Read the article

• Troubleshooting DTCPing Errors

  - by JimmyP

  So I am running DTC ping between 2 machines on our network and am getting the following error ++++++++++++++++++++++++++++++++++++++++++++++ DTCping 1.9 Report for WEB2 ++++++++++++++++++++++++++++++++++++++++++++++ RPC server is ready ++++++++++++Validating Remote Computer Name++++++++++++ 03-03, 13:39:45.099-->Start DTC connection test Name Resolution: internal-->10.20.3.236-->internal.something 03-03, 13:39:45.114-->Start RPC test (WEB2-->internal) Problem:fail to invoke remote RPC method Error(0x6BA) at dtcping.cpp @303 -->RPC pinging exception -->1722(The RPC server is unavailable.) RPC test failed I have also run RPC ping where I get what I beleive is the same error: C:\Program Files\Windows Resource Kits\Tools>rpcping -s internal Exception 1722 (0x000006BA) Number of records is: 4 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1722 Detection location is 323 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1237 Detection location is 313 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 311 Flags is 0 NumberOfParameters is 3 Long val: 135 Pointer val: 0 Pointer val: 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 318 Flags is 0 NumberOfParameters is 0 I'm pretty sure that the exception number 1722 is the key but I can't find any info about it. There may be a firewall with ports that need opening between the machines which I am checking with our sys admins now. But I can do a regular ping between the machines. Other than that I am reading a lot of articles talking about OS services and components I know nothing about and am having trouble finding any info on. Can anyone shed any light on this? FYI the machine is running Windows Server 2003 RS SP2.

  Read the article

• How to keep multiple servers in sync file wise?

  - by GForceSys

  I'm currently managing a cluster of PHP-FPM servers, all of which tend to get out of sync with each other. The application that I'm using on top of the app servers (Magento) allows for admins to modify various files on the system, but now that the site is in a clustered set up modifying a file only modifies it on a single instance (on one of the app servers) of the various machines in the cluster. Is there an open-source application for Linux that may allow me to keep all of these servers in sync? I have no problem with creating a small VM instance that can listen for changes from machines to sync. In theory, the perfect application would have small clients that run on each machine to be synced, which would talk to the master server which would then decide how/what to sync from each machine. I have already examined the possibilities of running a centralized file server, but unfortunately my app servers are spread out between EC2 and physical machines, which makes this unfeasible. As there are multiple app servers (some of which are dynamically created depending on the load of the site), simply setting up a rsync cron job is not efficient as the cron job would have to be modified on each machine to send files to every other machine in the cluster, and that would just be a whole bunch of unnecessary data transfers/ssh connections.

  Read the article

• IIS HTTP Error 403.1 - Forbidden: Execute access is denied

  - by coxymla

  I have a ASP.NET 1.1 application running on IIS 6 / Windows Server 2003. It's our application, but we're trying to specifically replicate a customer's installation so the app folder has been copied entirely from their production server onto our test machine, and then we've created the Virtual Directory and Web Application for IIS manually. The problem I have is that when we access the app, we get the standard IIS security error message: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. -------------------------------------------------------------------------------- Please try the following: •Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS) Now this is pretty standard, except as far as I can see it's not anything so simple. I have checked: IIS user has read access to the directory IIS user and Network Service users have read/write access to the Temporary ASP.NET Files folder Virtual directory is set to the correct version of ASP.NET ASP.NET 1.1 Web Service Extension is allowed Virtual directory has the correct mappings of file extensions and all verbs to the aspnet 1.1 DLL Virtual directory properties allow Scripts and Executables to be run Anonymous access is turned on and the username and password is correct What am I missing?

  Read the article

• Maintaining ISAPI Rewrite Path with the ASP.NET tilde (~)

  - by Adam

  My team is upgrading from ASP.NET 3.5 to ASP.NET 4.0. We are currently using Helicon ISAPI Rewrite to map http://localhost/<account-name>/default.aspx to http://localhost/<virtual-directory>/default.aspx?AccountName=<account-name> where <account-name> is a query string variable and <virtual-directory> is a virtual directory (naturally). Before the upgrade the tilde (~) resolved to http://localhost/<account-name>/... (which I want it to do) and after the upgrade the tilde resolves to http://localhost/<virtual-directory>/... which results in an error because the <account-name> query string is required. I'd like to avoid going down the road of replacing everything with relative paths because there are several features in our system that use the entire URL instead of just the relative path. For what it's worth I'm using IIS7 in Windows 7, Visual Studio 2010 with ASP.NET 4.0 and the 64 bit Helicon ISAPI Rewrite. If I switch back to the ASP.NET 3.5 version then it still works fine (leading me to believe nothing changed in IIS unless it's within the 4.0 app pool - when I switch back and forth between 3.5 and 4.0 I have to change the app pool in IIS). Any ideas? Thanks in advance!

  Read the article

• Why I am getting a Heap Corruption Error?

  - by vaidya.atul

  I am new to C++. I am getting HEAP CORRUPTION ERROR. Any help will be highly appreciated. Below is my code class CEntity { //some member variables CEntity(string section1,string section2); CEntity(); virtual ~CEntity(); //pure virtual function .. virtual CEntity* create()const =0; }; I derive CLine from CEntity as below class CLine:public CEntity { // Again some variables ... // Constructor and destructor CLine(string section1,string section2); CLine(); ~CLine(); CLine* Create() const; } // CLine Implementation CLine::CLine(string section1,string section2):CEntity(section1,section2){}; CLine::CLine(); CLine* CLine::create()const{return new CLine();} I have another class CReader which uses CLine object and populates it in a multimap as below class CReader { public: CReader(); ~CReader(); multimap<int,CEntity*>m_data_vs_entity; }; //CReader Implementation CReader::CReader() { m_data_vs_entity.clear(); }; CReader::~CReader() { multimap<int,CEntity*>::iterator iter; for(iter = m_data_vs_entity.begin();iter!=m_data_vs_entity.end();iter++) { CEntity* current_entity = iter->second; if(current_entity) delete current_entity; } m_data_vs_entity.clear(); } I am reading the data from a file and then populating the CLine Class.The map gets populated in a function of CReader class. Since CEntity has a virtual destructor, I hope the piece of code in CReader's destructor should work. In fact, it does work for small files but I get HEAP CORRUPTION ERROR while working with bigger files. If there is something fundamentally wrong, then, please help me find it, as I have been scratching my head for quit some time now. Thanks in advance and awaiting reply, Regards, Atul

  Read the article

• BindAttribute, Exclude nested properties for complex types

  - by David Board

  I have a 'Stream' model: public class Stream { public int ID { get; set; } [Required] [StringLength(50, ErrorMessage = "Stream name cannot be longer than 50 characters.")] public string Name { get; set; } [Required] [DataType(DataType.Url)] public string URL { get; set; } [Required] [Display(Name="Service")] public int ServiceID { get; set; } public virtual Service Service { get; set; } public virtual ICollection<Event> Events { get; set; } public virtual ICollection<Monitor> Monitors { get; set; } public virtual ICollection<AlertRule> AlertRules { get; set; } } For the 'create' view for this model, I have made a view model to pass some additional information to the view: public class StreamCreateVM { public Stream Stream { get; set; } public SelectList ServicesList { get; set; } public int SelectedService { get; set; } } Here is my create post action: [HttpPost] [ValidateAntiForgeryToken] public ActionResult Create([Bind(Include="Stream, Stream.Name, Stream.ServiceID, SelectedService")] StreamCreateVM viewModel) { if (ModelState.IsValid) { db.Streams.Add(viewModel.Stream); db.SaveChanges(); return RedirectToAction("Index", "Service", new { id = viewModel.Stream.ServiceID }); } return View(viewModel); } Now, this all works, apart from the [Bind(Include="Stream, Stream.Name, Stream.ServiceID, SelectedService")] bit. I can't seem to Include or Exclude properties within a nested object.

  Read the article

• When I add a database table to a DBML file via LINQ to SQL, I get a slew of compiler errors.

  - by Zian Choy

  Whenever I add a certain table to a DBML file via LINQ to SQL, I get 102 errors in my VB NET project. Some of the errors: Error 1 Attribute 'TableAttribute' cannot be applied multiple times. C:\Documents and Settings\zchoy\My Documents\Virtual EMS Deployment\Life And Death\Life And Death\ShearwaterEMS.designer.vb 74 2 EMS Reality Check Error 2 'emptyChangingEventArgs' is already declared as 'Private Shared emptyChangingEventArgs As System.ComponentModel.PropertyChangingEventArgs' in this class. C:\Documents and Settings\zchoy\My Documents\Virtual EMS Deployment\Life And Death\Life And Death\ShearwaterEMS.designer.vb 78 17 EMS Reality Check Error 3 '_GroupID' is already declared as 'Private _GroupID As Integer' in this class. C:\Documents and Settings\zchoy\My Documents\Virtual EMS Deployment\Life And Death\Life And Death\ShearwaterEMS.designer.vb 80 10 EMS Reality Check Error 4 '_ID' is already declared as 'Private _ID As Integer' in this class. C:\Documents and Settings\zchoy\My Documents\Virtual EMS Deployment\Life And Death\Life And Death\ShearwaterEMS.designer.vb 82 10 EMS Reality Check Any suggestions for getting the table to work with LINQ to SQL will be welcomed. The table's properties: Group ID ID (Primary Key) Contact Title UseGroupAddress InternationalFormat Address1 Address2 City State ZipCode Country Phone Fax EMailAddress Notes DateAdded AddedBy DateChanged ChangedBy Active ExternalReference ChangeCounter PhoneLabel FaxLabel

  Read the article

• Extend base type and automatically update audit information on Entity

  - by Nix

  I have an entity model that has audit information on every table (50+ tables) CreateDate CreateUser UpdateDate UpdateUser Currently we are programatically updating audit information. Ex: if(changed){ entity.UpdatedOn = DateTime.Now; entity.UpdatedBy = Environment.UserName; context.SaveChanges(); } But I am looking for a more automated solution. During save changes, if an entity is created/updated I would like to automatically update these fields before sending them to the database for storage. Any suggestion on how i could do this? I would prefer to not do any reflection, so using a text template is not out of the question. A solution has been proposed to override SaveChanges and do it there, but in order to achieve this i would either have to use reflection (in which I don't want to do ) or derive a base class. Assuming i go down this route how would I achieve this? For example EXAMPLE_DB_TABLE CODE NAME --Audit Tables CREATE_DATE CREATE_USER UPDATE_DATE UPDATE_USER And if i create a base class public abstract class IUpdatable{ public virtual DateTime CreateDate {set;} public virtual string CreateUser { set;} public virtual DateTime UpdateDate { set;} public virtual string UpdateUser { set;} } The end goal is to be able to do something like... public overrride void SaveChanges(){ //Go through state manager and update audit infromation //FOREACH changed entity in state manager if(entity is IUpdatable){ //If state is created... update create audit. //if state is updated... update update audit } } But I am not sure how I go about generating the code that would extend the interface.

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >