Search Results

Search found 14837 results on 594 pages for 'duplicate ip'.

Page 158/594 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165 | Next Page >

How to setup an IPSec / GRE tunnel on Windows Server 2008

- by qbeuek

I have a Windows Server 2008 that has a single network interface configured with a public IP address. My business partner has a private network. From my server, I need to access all the devices on his private network, and those devices must be able to access my server. My business partner has a standard solution for these requirements. They will setup an IPSec + GRE tunnel to my server. They told me, that I will need an additional public IP address for this to work. If it really is necessary, there is no problem, I can get an additional public IP address, although it will be assigned to the same physical network interface. I assume that on my server I will have both public IP addresses and also the private IP address from the tunnel (the same that is visible for the devices inside the private network). What alternatives do I have? Is it possible to configure this tunnel on my Windows Server 2008? Can it be done using only Windows tools, or do I need an additional free / commercial VPN software? If it cannot be done directly on Windows, can I setup an additional virtual machine running Linux, that will handle the IPSec + GRE tasks? How to do it? If it cannot be done on a virtual linux box, will I have to buy and setup a Cisco router to handle the IPSec + GRE tasks? Thanks for your opinions. I'm watching this question to clarify any issues or questions.

Read the article
VirtualBox 4.1.12 Ubuntu Host Bridged Networking

- by hidden_premise

Setup Ubuntu Server 11.10 x64 VirtualBox 4.1.12 One network adapter eth0 with a static IP address My /etc/network/interfaces looks like #Local loopback auto lo iface lo inet loopback #Primary Interface auto eth0 iface eth0 inet static address 10.0.0.6 netmask 255.255.255.0 gateway 10.0.0.1 Need Static IP for Ubuntu Host Static IP for multiple Ubuntu guests My attempt Downloaded the .deb for 64bit virtual box dpkg -i virtualbox.deb Create a VM and install ubuntu server 11.10 x64 from ISO Set the networking mode to bridged and choose 'eth0' as the interface Fail. None of the guides I can find for bridged networking work because everything changed since vbox 2

Read the article
Tomcat and IIS6 on one server, multiple websites

- by Rafe

Windows Server 2003 with IIS6 and Tomcat 6.0.26. Three sites running on this server. One is PHP, one is ASP and the third uses Tomcat. The first two work flawlessly. The third is being a pain. Tomcat is installed and if called on the server itself by IP address xxx.xxx.xxx.xxx:8080 shows the welcome page. Calling the same address from an external machine gives a 'could not connect' error. Calling the ip address from within the server on standard port 80 gives me an error 324 (net::ERR_EMPTY_RESPONSE). Have tried using httpcfg to force listening only on ports within the ip range I'm using in a manner similar to question 35650 located here on serverfault but with no success. There are actually ten ip addresses on this machine but I'm only using three of them at this point. Any pointers on troubleshooting this would be appreciated!

Read the article
sudo ENV_KEEP not always preserving

- by mafro

When I run sudo -s, my environment is preserved. However, when running a simple sudo <command> it appears not to be preserved. The contents of my sudoers file: mafro@ip-10-xx-xx-250:~ > sudo cat /etc/sudoers.d/mafro Defaults env_reset Defaults env_keep += "HOME" mafro ALL=(ALL) NOPASSWD:ALL Using sudo -s, the ll alias is available: mafro@ip-10-xx-xx-250:~ > sudo -s root@ip-10-xx-xx-250:~ > ll total 8K drwxrwxr-x 2 mafro dev 4.0K Jun 9 23:59 bin drwxr-xr-x 20 mafro dev 4.0K Jun 9 23:59 dotfiles Using straight sudo, it is not: mafro@ip-10-xx-xx-250:~ > sudo ll sudo: ll: command not found What is happening here?

Read the article
Problems setting up home web server

- by putmatrix

Has anyone been able to get a server working with the router smcwbr14t-g? Although I have been able to get Apache set up correctly and my website works on the internal IP 192.168.2.101, I've been running into a dead end when trying to get it to show up on my external IP. In my router, there is no option for port forwarding, but there are options for a 'virtual server'. Following the manual, I have it set up like this: http://imgur.com/zrcV7.png I also disabled the firewall. I configured Apache to listen to ports 80, 81, and 443, none of which solved the problem. However, the IP's 192.168.2.101:443 and :81 load fine. The problem is that I still cannot load the web site from my external IP, either from my computer or outside.

Read the article
Ubuntu web site hosting & free ,tk domain

- by user5819

Hello, I am sort of new to web hosting so sorry if I ask bad questions. I have a pc that runs ubuntu I instaled apache and now I host a web site, but I need a domain name so I found out .tk is free. The site works when typing 192.168.1.x in the browser(x= a number) but in dot.tk when I register in ip it whats one that look like 79.117.x.x so thats where I get stuck, I think I managed to make my ip address static but it still looks like 192.168.1.x and I can't put that in because it says: " This IP address is not valid". Why must it have the ip address that looks like 79.117.x.x and won't work with the internal static one and how can I do to host my site with a .tk domain name ? PS: I'm using a cisco router that's connected with computer via a cable.

Read the article
Redirect specific domains with DNS

- by user66377

Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

Read the article
Haproxy not properly passing on X-Forwarded-For header

- by JesseP

I have backend web servers that receive requests by way of haproxy-nginx-fastcgi. The web app used to see multiple ip's coming through in the X-Forwarded-For header, chained together with commas (most original IP on the left). At some point in the recent past (just noticed, so not sure what caused it) something changed, and now I'm only seeing a single IP passed in the header to my web application. I've tried with haproxy 1.4.21 and 1.4.22 (recent upgrade) with the same behavior. Haproxy has the forwardfor header set: option forwardfor Nginx fastcgi_params config defines this header to be passed to the app: fastcgi_param HTTP_X_FORWARDED_FOR $http_x_forwarded_for; Anyone have any ideas on what might be going wrong here? EDIT: I just started logging the $http_x_forwarded_for variable in nginx logs, and nginx is only ever seeing a single IP, which shouldn't ever be the case, as we should always see our haproxy ip added in there, right? So, issue must either be in nginx handling of the variable coming in, or haproxy not building it properly. I'll keep digging... EDIT #2: I enabled request and response header logging in HAProxy, and it is not spitting anything out for X-Forwarded-For, which seems very odd: Oct 10 10:49:01 newark-lb1 haproxy[19989]: 66.87.95.74:47497 [10/Oct/2012:10:49:01.467] http service/newark2 0/0/0/16/40 301 574 - - ---- 4/4/3/0/0 0/0 {} {} "GET /2zi HTTP/1.1" O Here are the options i set for this in my frontend: mode http option httplog capture request header X-Forwarded-For len 25 capture response header X-Forwarded-For len 25 option httpclose option forwardfor EDIT #3: It really seems like haproxy is munging the header and just passing on a single one to the backend. This is fairly impacting to our production service, so if anyone has an ideas it would be greatly appreciated. I'm stumped... :(

Read the article
Is it bad to have the Reverse DNS for two IPs point to the same domain name?

- by Daniel Vandersluis

I am in the process of setting up a new server for my domain (the site will be moved, it is not for load balancing or the like), which has a different IP address from my existing server. My current server has a reverse DNS PTR record set up pointing its IP to mydomain.com. Is it bad to set up a reverse DNS PTR record for the new IP pointing to mydomain.com as well? Or should I wait until I do my migration to set up the record?

Read the article
Mail server configuration

- by Rashid Iqbal

I want to configure mail server at my office. for this purpose I purchase on live IP and ask the ISP to set a ptr against that Live IP. in response I get the email from ISP in which three entries listed. as shown below: Live IP: xxx.xxx.xx.xxx ns1.xxx.net.xx ns2.xxx.net.xx now please help to setup at my end.

Read the article
wireless network with cable modem and access point

- by hayri

I have a Scientific Atlanta EPC2203 cable modem and a TP-Link TL-WA500G access point. When I connect my computer directly to modem with a CAT5e cable I have internet connection on my laptop (when i type ipconfig i see my external ip there, provided by isp). So I decided to have wireless network in the flat, allowing other devices to connect as well. I bought this wireless ap (TL-WA500G) configured Wireless security stuff, and connected it to my modem. With that configuration (by default AP has static ip of 192.168.1.254) only my computer can connect to internet over wifi, but not any other device. When I set the IP of AP to Dynamic IP (DHCP) it is the same. How should I change my configuration to enable all wifi devices to connect to internet?

Read the article
VPN from Windows XP to OpenSwan: correct setup?

- by Gnudiff

Main question is what I am doing wrong in my OpenSwan or L2TP client setup? I am trying to create a Linux OpenSwan VPN connection from Windows XP machine, using preshared key and the builtin Windows XP L2TP IPsec option. I have followed the instructions in Linux Home networking Wiki for setting up OpenSwan and a guide to making it work with the Windows XP client, but am now stuck. The net setup is as follows: [my windows client, private IP A]<->[f/wall B]<-internet->[g/w X]<->[Linux OpenSwan server Y] A - private subnet /24 B - internet address X - internet address /24 Y - internet address on same subnet as X What I essentially want is for computer with A address to feel and work, as if it was in X subnet for purposes of outgoing and incoming TCP and UDP connections. My OpenSwan setup is as follows: /etc/ipsec.conf (AAA and YYY indicates ip address parts of A and Y addresses): conn net-to-net authby=secret left=B leftsubnet=AAA.AAA.AAA.0/24 leftnexthop=%defaultroute right=Y rightsubnet=YYY.YYY.YYY.0/24 rightnexthop=B auto=start the secret in /etc/ipsec.secrets is listed as: B Y : PSK "0xMysecretkey" where B & Y stand for respective IP adresses of gateway B and linux server Y My L2TP WinXP setup is: IP of destination: Y don't prompt for username security options: typical, require secured pass, don't require data encryption, IPSec PSK set to 0xMysecretkey networking options: VPN Type: L2TP IPSec VPN; TCPIP protocol (with automatic IP address assignment) and QOS packet schedulers enabled The error I get from Windows client is 789: "error during initial negotiation"

Read the article
Vmware - How do i config a host-only network

- by nXqd

The understanding about Host-only: I use VMware 7, Vmnet1 is the host-only adapter for host and it's IP is 192.168.209.1 . I'm really confused about this , does it connect to Vmnet 1 switch and Vmnet has DHCP also, it provieds IP range: Why it has virtual host adapter ( Vmnet 1) has IP which isn't in range while it's just an adapter in virtual network, it connects through switch Vmnet like the guest adapter Waiting for your answers , thanks in advance :)

Read the article
b Is it bad to have the Reverse DNS for two IPs point to the same domain name?

- by Daniel Vandersluis

I am in the process of setting up a new server for my web application (the site will be moved, it is not for load balancing or the like), which has a different IP address from my existing server. My current server has a reverse DNS PTR record set up pointing its IP to mydomain.com. Is it bad to set up a reverse DNS PTR record for the new IP pointing to mydomain.com as well? Or should I wait until I do my migration to set up the record? Update: I forgot to mention, the A record for the mydomain.com points to the old server's IP address, not the new one, if it matters.

Read the article
Amazon EC2 SQL Server Connection

- by cnxmax

I have two instances running on Amazon AWS EC2. One is running MSSQL Server 2005, the other is running a web application. I CAN connect to the database in my app using a connection string that references the Public IP of my EC2 instance running SQL Server. I CANNOT connect from the web app server if I change the connection string to reference the database servers Private IP Address. But I can connect if I run that same code on the database server itself. I can remote desktop from the app server to the database server using the private IP. I have a feeling there is something in my SQL Sever configuration that is preventing this remote connection. I have remote connections enabled, I have it set to listen on all IP addresses. Any ideas? Other things I've done: - Added exceptions to Windows Firewall - Tried connecting to using EC2 DNS Names

Read the article
Unable to connect to cable modem when connected to VPN

- by Spuas

the scenario is as follows: First I have a cable modem which gives the internet connection. The network is 192.168.0.0/24 and its IP is 192.168.0.1 Second line, I have a router connected to the cable modem. Its "outside" IP is 192.168.0.12. This router creates network 192.168.123.0/24 and its IP there is 192.168.123.254. My computer is wired to the router with IP 192.168.123.126. At this point I am able to access both devices web interfaces by their IPs on a browser (192.168.123.254 for the router and 192.168.0.1 for the cable modem). The problem I have is when I connect to a VPN from the computer. Then I am connected to a second network 10.0.0.0/24 and I get IP 10.0.0.200 (along with 192.168.123.126). I can connect to the router but then I loose connectivity to the cable modem: I cannot acces it through the browser, neither making a ping to it or a tracert. I have tried to add a new route to the windows routes by typing route ADD 192.168.0.1 MASK 255.255.255.0 192.168.123.254 but I cannot access it anyway... Am I missing something on the route adding? Which is the propper way of doing this? Thanks

Read the article
Passing all traffic through Cloudflare

- by Nick

I am new to Linux System Administration and I am experimenting with iptables trying to learn how to really lock down a system with them. And one thing a friend of mine recommended was that there was a way to pass all incoming traffic through Cloudflare so even if attackers resolved the server ip they still couldn't (D)dos it directly. This is exactly what they said: "Simply config your servers iptables to only allow incoming connections from CloudFlares IP ranges then set it to allow only your IP/IP range to connect on port 21 (SSH)" Could someone help me on what command I'd need to run for Ubuntu to get this effect?

Read the article
What is the point of PPPoE?

- by aaa90210

I am trying to expand my knowledge of networking beyond the basics. I have started reading about PPP, and how it is used in DSL modems with PPPoE and PPPoA. My first impression of PPP was "well that seems pretty similar to Ethernet". They are both data link layer protocols. They both have fields to identify the encapsulated protocol (e.g. IP). They both have related protocols to assign IP addresses (DHCP and NCP). So my first question was "so what's the point of PPP, why not just use Ethernet?". The answer to that was fairly straightforward - Ethernet is not supported over a wide range of media like serial lines, and is a fairly specific technology to LAN's using CAT5 or similar. HOWEVER - then I was reading about PPPoE, and the obvious thought was "well if we are doing something over Ethernet, then Ethernet must be available and in use, so why not just use it?". In other words, PPPoE seems to be encapsulating one data-link layer protocol in another very similar protocol. Why do IP-inside-PPP-inside-Ethernet when we could just be doing IP-inside-Ethernet, and use DHCP rather than NCP to assign the IP address to the home router? Thanks

Read the article
windows clients cannot get dns resolution until you open and close ipv4 properties page

- by GC78

This strange problem has started recently. Some windows clients cannot seem to get dns resolution to the internet after boot, and sometimes again at some point in the day. Internal hosts are also slow to resolve. trying to ping an interal host by name will take a long time for the hostname to resolve to ip address and trying to ping a website by name will fail to resolve. If you go into the tcp/ip v4 properties and view but not change anything, ok/close out of that then the client starts working fine, hostnames will resolve quickly. I have seen this happen on both Vista and W7 clients. ipconfig /all at a client experiencing this problem shows everything in order. proper ip addr, gateway, dns server, dns suffix ect.. ipconfig /dnsflush will not fix them, neither will /release and /renew the clients get their ip address, mask and dns server info from either one of 2 OES dhcp servers that assign addresses in different scopes in the same subnet. the internal dns server is a different OES dns server the default gateway is not assigned by the OES server but is statically put in at the client (only for those who need to get to the Internet for their job) flat network topology What can I do to get to the bottom of this? It only happens to a few of the client machines and typically the same ones. It started happening when we made a change to one of the DHCP scopes in iManager. Strangly this problem only happens to clients that get an IP address from the scope that we didn't make any changes to.

Read the article
GRE Tunnel over IPsec with Loopback

- by Alek

Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

Read the article
subnetting a class c on a cisco 3825

- by Adeodatus

I have a class C that I want to better understand before I implement a change. Right now, ip address 192.168.0.1 255.255.255.192 ip address 192.168.0.65 255.255.255.240 secondary So, where is the 192.168.0.64 address in that mix? 192.168.0.63 should be the broadcast for the first one, and 192.168.0.65 should be the cisco secondary ip. And ... How then do I add a /28 (255.255.255.240) right before this segment: ip address 192.168.0.249 255.255.255.248 secondary In fact, I'll probably want to add it as a subinterface Can anyone help me to better understand whats going on and then how to do it?

Read the article
Getting packets from one port to another on a Dell PowerConnect 2824 switch

- by Arvo Bowen

I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

Read the article
"Password Server: Stopped" on Mac OS Lion Server. Stops with error -1 during startup

- by V1ru8

Since I've restored the Open Directory from an archive because my Server crashed and the DB was corrupt. The password server does not start anymore. The log looks like this: Feb 14 2012 21:41:20 156746us Mac OS X Password Service version 376.1 (pid = 2438) was started at: Tue Feb 14 21:41:20 2012. Feb 14 2012 21:41:20 156801us RunAppThread Created Feb 14 2012 21:41:20 156852us RunAppThread Started Feb 14 2012 21:41:20 156879us Initializing Server Globals ... Feb 14 2012 21:41:20 163094us Initializing Networking ... Feb 14 2012 21:41:20 163196us Initializing TCP ... Feb 14 2012 21:41:20 191790us SASL is using realm "SERVER.HOME.POST-NET.CH" Feb 14 2012 21:41:20 191847us Starting Central Thread ... Feb 14 2012 21:41:20 191860us Starting other server processes ... Feb 14 2012 21:41:20 191873us StartCentralThreads: 1 threads to stop Feb 14 2012 21:41:20 191905us Initializing TCP ... Feb 14 2012 21:41:20 191954us Starting TCP/IP Listener on ethernet interface, port 106 Feb 14 2012 21:41:20 192012us Starting TCP/IP Listener on ethernet interface, port 3659 Feb 14 2012 21:41:20 192048us Starting TCP/IP Listener on interface lo0, port 106 Feb 14 2012 21:41:20 192082us Starting TCP/IP Listener on interface lo0, port 3659 Feb 14 2012 21:41:20 192117us StartCentralThreads: Created 4 TCP/IP Connection Listeners Feb 14 2012 21:41:20 192132us Starting UNIX domain socket listener /var/run/passwordserver Feb 14 2012 21:41:20 193034us CRunAppThread::StartUp: caught error -1. Feb 14 2012 21:41:20 193056us ** ERROR: The Server received an error during startup. See error log for details. Feb 14 2012 21:41:20 193075us RunAppThread::StartUp() returned: 4294967295 Feb 14 2012 21:41:20 193107us Stopping server processes ... Feb 14 2012 21:41:20 193119us Stopping Network Processes ... Feb 14 2012 21:41:20 193131us Deinitializing networking ... Feb 14 2012 21:41:20 193149us Server Processes Stopped ... Feb 14 2012 21:41:20 193165us RunAppThread Stopped Feb 14 2012 21:41:20 193202us Aborting Password Service. See error log. The error log repeats the following: Feb 14 2012 21:41:50 409022us Server received error -1 during startup. Feb 14 2012 21:41:50 409141us Aborting Password Service. Anyone an idea what's wrong here and how I can fix this?

Read the article
Cisco IOS ACL types

- by cjavapro

The built in command help list displays access list types based on which range. router1(config)#access-list ? <1-99> IP standard access list <100-199> IP extended access list <1100-1199> Extended 48-bit MAC address access list <1300-1999> IP standard access list (expanded range) <200-299> Protocol type-code access list <2000-2699> IP extended access list (expanded range) <700-799> 48-bit MAC address access list dynamic-extended Extend the dynamic ACL absolute timer rate-limit Simple rate-limit specific access list router1(config)# What are each of the types? Can multiple types of ACLs be applied to a given interface?

Read the article
how to add a REverse PTR Record on Amazon Route 53?

- by Oscar Cabrero

if i have the below ip 168.144.254.X and i would like to add a ptr record in amazon in the form of X.254.144.168.in-addr.arpa what should be in the name field and what should be in the value field i have a zone created with a name like mydomain.com which host the DNS records for my ip. amazon wont let me add a value of X.254.144.168.in-addr.arpa in the name field do i need to create a new zone for the ip in order to allow this?

Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165 | Next Page >