Search Results

Search found 7768 results on 311 pages for 'enter'.

Page 158/311 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

  • Fix Problems Upgrading Office 2010 Beta to RTM (Final) Release

    - by Mysticgeek
    There are several scenarios where you may run into trouble uninstalling the 2010 Beta and trying to install the RTM (final) release. Today we’ll cover the problems we ran into, and how to fix them. You would think upgrading from the Office 2010 Beta to the final release would be an easy process. Unfortunately, it’s not always that simple. In fact, we ran into three different scenarios where the install wasn’t smooth whatsoever. If you currently have the 2010 Beta installed, you have to remove it before you can install the RTM.  Here we’ll take a look at three different troublesome install scenarios we ran into, and how we fixed each one. Important Note: Before proceeding with any of these steps, make sure and backup your Outlook .pst files! Scenario 1 – Uninstall Office 2010 Beta & Fix Install Errors In this first scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. First try to uninstall the Office 2010 Beta by going into Control Panel and selecting Programs and Features. Scroll down to Microsoft Office Professional Plus 2010, right-click it and select Uninstall. Click Yes when the confirmation dialog box comes up. Wait while Office 2010 Beta uninstalls…the amount of time it takes will vary from system to system. To complete the uninstall process, a reboot is required. Fixing Setup Errors The problem is when you start the installation of the 2010 RTM… You get the following setup error even though you uninstalled the 2010 Beta. The problem is there are leftover Office apps or stand alone Office products. So, we need a utility that will clean them up for us.   Windows Installer Clean Up Utility Download and install the Clean Up Utility (link Below) following the defaults. After it’s installed you’ll find it in Start \ All Programs \ Windows Install Clean Up …go ahead and launch the utility. Now go through and remove all Office Programs or addins that you find in the list. Make sure you are just deleting Office apps and not something you need like Java for example. If you’re not sure what something is, doing a quick Google search should help you out. For instance we had the Office labs Ribbon Hero installed… just highlight and click Remove. Remove anything that has something to do with Office…then reboot your machine. Now, you should be able to begin the installation of Office 2010 RTM (Final) Release without any errors. If you do get an error during the install process, like this one telling us we have old version of Groove Server… Navigate to C:\Users\username\AppData\Local\Microsoft (where username is the computer name) and delete any existing MS Office folders. Then try the install again, this solved the problem in our first scenario. Scenario 2 – Not Being Able to Uninstall 2010 Beta from Programs and Features In this next scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. Another problem we ran into is not being able to uninstall the 2010 Beta from Programs and Features. When you go in to uninstall it, nothing happens. If you run into this problem, we again need to download and install the Windows Installer Clean Up Utility (link below) and manually uninstall the Beta. When you launch it, scroll down to Microsoft Office Professional Plus 2010 (Beta), highlight it and click Remove.   Click OK to the Warning Dialog box… If you see any other Office 2010, 2007, or 2003 entries you can hold the “Shift” key and highlight them all…then click Remove and click OK to the warning dialog. Now we need to delete some Registry settings. Click on Start and type regedit into the Search box and hit Enter. Navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. Now go into C:\Program Files and find any of these three folders…Microsoft Office, OfficeUpdate, or OfficeUpdate14…you might find one, two or all three. Either way just rename the folders with “_OLD” (without quotes) at the end. Then go into C:\Users\username\AppData\Local\Microsoft and delete any existing MS Office folders. Where in this example we have office, Office Labs, One Note…etc. Now we want to delete the contents of the Temp folder. Click on Start and type %temp% into the Search box and hit Enter. Use the key combination “Ctrl+A” to select all the files in this folder, then right-click and click Delete, or simply hit the Delete key. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. When you get back from the restart launch the Office 2010 RTM installer and you should be good to go with installation. Because we uninstalled the Office 2010 Beta manually, you may have some lingering blank icons that you’ll need to clean up. Scenario –3 Uninstall 2007 and Install 2010 32-Bit on x64 Windows 7 For this final scenario we are uninstalling Office Professional 2007 and installing Office Professional Plus 2010 32-Bit edition on a Windows Ultimate 64-bit computer. This machine actually had Office 2010 Beta 64-bit installed at one point also, it’s since been removed, and 2007 was reinstalled.  Go into Programs and Settings and uninstall Microsoft Office Professional 2007. Click Yes to the dialog box asking if you’re sure you want to uninstall it… Then wait while Office 2007 is uninstalled. The amount of time it takes will vary between systems. A restart is required to complete the process… Again we need to call upon the Windows Installer Clean Up Utility. Go through and delete any left over Office 2007 and 2010 entries. Click OK to the warning dialog that comes up. After that’s complete, navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. We still need to go into C:\Users\ username\AppData\ Local\ Microsoft (where username is the computer name) and delete any Office folders. In this example we have Outlook Connector, Office, and Outlook to delete. Now let’s delete the contents of the Temp folder by typing %temp% into the Search box in the Start Menu. Then delete all of the files and folders in the Temp directory. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. If you try to install the 2010 RTM at this point you might be able to begin the install, but may get the following Error 1402 message. To solve this issue, we opened the command prompt and ran the following: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose After the command completes, kick off the Office 2010 (Final) RTM 32-bit edition. This solved the issue and Office 2010 installed successfully.   Conclusion Except for the final scenario, we found using the Windows Installer Clean Up Utility to come in very handy. Using that along with deleting a couple folders and registry settings did the trick. In the last one, we had to get a bit more geeky and use some command line magic, but it got the job done. After some extensive testing in our labs, the only time the upgrade to the RTM went smoothly was when we had a clean Vista or Windows 7 system with a fresh install of the 2010 beta only. However, chances are you went from 2003 or 2007 to the free 2010 Beta. You might also have addins or other Office products installed, so there are going to be a lot of different office files scattered throughout your PC. If that’s the case, you may run into the issues we covered here. These are a few scenarios where we got errors and were not able to install Office 2010 after removing the beta. There could be other problems, and if any of you have experienced different issues or have more good suggestions, leave a comment and let us know! Link Download Windows Installer Clean Up Utility Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007How to Upgrade the Windows 7 RC to RTM (Final Release)Upgrading Ubuntu from Dapper to Edgy with Update ManagerDisable Office 2010 Beta Send-a-Smile from StartupAdd or Remove Apps from the Microsoft Office 2007 or 2010 Suite TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

    Read the article

  • Kill your temp tables using keyboard shortcuts : SSMS

    - by jamiet
    Here’s a nifty little SSMS trick that my colleague Tom Hunter educated me on the other day and I thought it was worth sharing. If you’re a keyboard shortcut junkie then you’ll love it. How often when working with code in SSMS that contains temp tables do you see the following message: Msg 2714, Level 16, State 6, Line 78 There is already an object named '#table' in the database. Quite often I would imagine, it happens to me all the time! Usually I write a bit of code at the top of the query window that goes and drops the table if it exists but there’s a much easier way of dealing with it. Remember that temp tables disappear as soon as your sessions ends hence wouldn’t it be nice if there were a quick way of recycling (i.e. stopping and restarting) your session? Well turns out there is and all it takes is a sequence of 4 keystrokes: Bring up the context menu using that mythically-named button that usually sits 3 to the right of the space bar ‘C’ for “Connection” ‘H’ for “Change Connection…” ‘Enter’ to select the same connection you had open last time (screenshots below) Once you’ve done it a few times you’ll probably have the whole sequence down to less than a second. Such a simple little trick, I’m annoyed with myself for it not occurring to me before! The only caveat is that you’ll need a “USE <database>” directive at the top of your query window but I don’t think that’s much of a bind! That is all other than to say if you like little SSMS titbits like this then Lee Everest’s blog is a good one to keep an eye on! @jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

    - by Matt Klein
    Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

    Read the article

  • I can't finish installation of 12.10 on Windows 8

    - by Janna Zhou
    When I followed the instruction to install Ubuntu 12.10 with wubi, the come out window ask me to reboot the computer to finish the installation. I followed the instruction and stopped with the message I have left below. Could you please tell me how to finish installation? I'm worried if I follow the instruction below to remove_hiberfile in Windows it would result in a failure to boot my Window 8 system: Completing the Ubuntu installation. For more installation boot options, press 'ESC'now... 0 Busy Box v1.19.3 (Ubuntu 1:1.19.3-7ubuntu1) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) windows is hibernated, refused to mount. Failed to mount '/dev/sda2/: Operation not permitted the NTFS partition is hibernated. Please resume and shutdown Windows properly, or mount the volume read-only with the 'ro' mount option, or mount the volume read-write with the 'remove_hiberfile' mount option. For example type on the command line: mount -t ntsfs-3g -0 remove_hiberfile/dev/sda2/isodevice mount:mounting/dev/sda2 on /isodevice failed: No such device Could not find the ISO/ubuntu/install/installation.iso This could also happen if the file system is not clean because of an operating system crash, an interrupted boot process, an improper shutdown, or unplugging of a removable device without first unmounting or ejecting it. To fix this, simply reboot into windows, let it fully start, log in, run 'chkdsk/r', then gracefully shut down and reboot back into Windows. After this you should be able to reboot again and resume the installation.

    Read the article

  • Apache2 on Raspbian: Multiviews is enabled but not working

    - by Christian L
    I recently moved webserver, from a ubuntuserver set up by my brother (I have sudo) to a rasbianserver set up by my self. On the other server multiviews worked out of the box, but on the raspbian it does not seem to work althoug it seems to be enabled out of the box there as well. What I am trying to do is to get it to find my.doma.in/mobile.php when I enter my.doma.in/mobile in the adress field. I am using the same available-site-file as I did before, the file looks as this: <VirtualHost *:80> ServerName my.doma.in ServerAdmin [email protected] DocumentRoot /home/christian/www/do <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/christian/www/do> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> From what I have read various places while googling this issue I found that the negotiation module had to be enabled so I tried to enable it. sudo a2enmod negotiation Giving me this result Module negotiation already enabled I have read through the /etc/apache2/apache2.conf and I did not find anything in particular that seemed to be helping me there, but please do ask if you think I should post it. Any ideas on how to solve this through getting Multiviews to work?

    Read the article

  • Do game-theoretic considerations stand in the way of this market-based game-mechanic achieving its goals?

    - by BerndBrot
    Mechanic The mechanic is called "market manipulation" and is supposed to work like this: Players can enter the London Stock Exchange (LSE) LSE displays the stock prices of 8 to 10 companies and derivatives. This number is relatively small to ensure that players will collide in their efforts to manipulate the market in their favor. The prices are calculated based on real world prices of these companies and derivatives (in real time) any market manipulations that were conducted by the players any market corrections of the system Players can buy and sell shares with cash, a resource in the game, at current in-game market value Players can manipulate the market, i.e. let the price of a share either rise or fall, by some amount, over a certain period of time. Manipulating the market requires spending certain in-game resources and is therefore limited. The system continuously corrects market manipulations by letting the in-game prices converge towards their real world counterparts at a rate of 2% of the difference between the two per hour. Because of this market correction mechanism, pushing up prices (and screwing down prices) becomes increasingly difficult the higher (lower) the price already is. Goals Players are supposed to collide (and have incentives to collide) in their efforts to manipulate the market in their favor, especially when it comes to manipulation efforts by different groups. Prices should not resolve around any equilibrium points. The more variance the better. Band-wagoning should always involve risk (recognizing that prices start rising should not be a sure sign that they will keep rising so that everybody can make easy profits even when they don't manipulate the market themselves) Question Are there any game-theoretic considerations that prevent the mechanic from achieving these goals?

    Read the article

  • Thread Synchronization and Synchronization Primitives

    When considering synchronization in an application, the decision truly depends on what the application and its worker threads are going to do. I would use synchronization if two or more threads could possibly manipulate the same instance of an object at the same time. An example of this in C# can be demonstrated through the use of storing data in a static object. A static object is initialized once per application and the data within the object can be accessed by all threads. I would use the synchronization primitives to prevent any data from being manipulated by multiple threads simultaneously. This would reduce any data corruption from occurring within the object. On the other hand if all the threads used non static objects and were independent of the other tasks there would be no need to use synchronization. Synchronization Primitives in C#: Basic Blocking Locking Signaling Non-Blocking Synchronization Constructs The Basic Blocking methods include Sleep, Join, and Task.Wait.  These methods force threads to wait until other threads have completed. In addition, these methods can also force a thread to wait a set amount of time before continuing to work.   The Locking primitive prevents a thread from entering a critical section of code while another thread is in the same critical section.  If another thread attempts to enter a locked code, it will wait, until the code block is released. The Signaling primitive allows a thread to temporarily pause work until receiving a notification from another thread that it is ok to continue working. The Signaling primitive removes the need for polling.The Non-Blocking Synchronization Constructs protect access to a common field by calling upon processor primitives.

    Read the article

  • Building a regex builder

    - by i.h4d35
    I am a beginner in programming in general and web development in particular. I am especially bad at regular expressions. Recently I was involved in building a couple of cPanel plugins(Perl-CGI) and that's when I realized how bad I am in regex. As a result, I have decided to build an online regex builder - this will help me to learn regex and help other struggling with regex. I have checked out GSkinner, Rubular and a couple of others like regexpal. It seemed to be a little difficult to use, hence i thought of writing another one. I do not know which tool is best suited for the job. should I write it in Perl or Python? My skill level is between beginner and intermediate in both those languages. What would be a good starting point - building it for the CLI or for the browser? I plan to get a string as an input, ask if the user want to search or search and replace, enter the search string (and the replace string where applicable) and then generate a regex. Would this be the right way to go?

    Read the article

  • How to Use USER_DEFINED Activity in OWB Process Flow

    - by Jinggen He
    Process Flow is a very important component of Oracle Warehouse Builder. With Process Flow, we can create and control the ETL process by setting all kinds of activities in a well-constructed flow. In Oracle Warehouse Builder 11gR2, there are 28 kinds of activities, which fall into three categories: Control activities, OWB specific activities and Utility activities. For more information about Process Flow activities, please refer to OWB online doc. Most of those activities are pre-defined for some specific use. For example, the Mapping activity allows execution an OWB mapping in Process Flow and the FTP activity allows an interaction between the local host and a remote FTP server. Besides those activities for specific purposes, the User Defined activity enables you to incorporate into a Process Flow an activity that is not defined within Warehouse Builder. So the User Defined activity brings flexibility and extensibility to Process Flow. In this article, we will take an amazing tour of using the User Defined activity. Let's start. Enable execution of User Defined activity Let's start this section from creating a very simple Process Flow, which contains a Start activity, a User Defined activity and an End Success activity. Leave all parameters of activity USER_DEFINED unchanged except that we enter /tmp/test.sh into the Value column of the COMMAND parameter. Then let's create the shell script test.sh in /tmp directory. Here is the content of /tmp/test.sh (this article is demonstrating a scenario in Linux system, and /tmp/test.sh is a Bash shell script): echo Hello World! > /tmp/test.txt Note: don't forget to grant the execution privilege on /tmp/test.sh to OS Oracle user. For simplicity, we just use the following command. chmod +x /tmp/test.sh OK, it's so simple that we’ve almost done it. Now deploy the Process Flow and run it. For a newly installed OWB, we will come across an error saying "RPE-02248: For security reasons, activity operator Shell has been disabled by the DBA". See below. That's because, by default, the User Defined activity is DISABLED. Configuration about this can be found in <ORACLE_HOME>/owb/bin/admin/Runtime.properties: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint=DISABLED The property can be set to three different values: NATIVE_JAVA, SCHEDULER and DISBALED. Where NATIVE_JAVA uses the Java 'Runtime.exec' interface, SCHEDULER uses a DBMS Scheduler external job submitted by the Control Center repository owner which is executed by the default operating system user configured by the DBA. DISABLED prevents execution via these operators. We enable the execution of User Defined activity by setting: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint= NATIVE_JAVA Restart the Control Center service for the change of setting to take effect. cd <ORACLE_HOME>/owb/rtp/sql sqlplus OWBSYS/<password of OWBSYS> @stop_service.sql sqlplus OWBSYS/<password of OWBSYS> @start_service.sql And then run the Process Flow again. We will see that the Process Flow completes successfully. The execution of /tmp/test.sh successfully generated a file /tmp/test.txt, containing the line Hello World!. Pass parameters to User Defined Activity The Process Flow created in the above section has a drawback: the User Defined activity doesn't accept any information from OWB nor does it give any meaningful results back to OWB. That's to say, it lacks interaction. Maybe, sometimes such a Process Flow can fulfill the business requirement. But for most of the time, we need to get the User Defined activity executed according to some information prior to that step. In this section, we will see how to pass parameters to the User Defined activity and pass them into the to-be-executed shell script. First, let's see how to pass parameters to the script. The User Defined activity has an input parameter named PARAMETER_LIST. This is a list of parameters that will be passed to the command. Parameters are separated from one another by a token. The token is taken as the first character on the PARAMETER_LIST string, and the string must also end in that token. Warehouse Builder recommends the '?' character, but any character can be used. For example, to pass 'abc,' 'def,' and 'ghi' you can use the following equivalent: ?abc?def?ghi? or !abc!def!ghi! or |abc|def|ghi| If the token character or '\' needs to be included as part of the parameter, then it must be preceded with '\'. For example '\\'. If '\' is the token character, then '/' becomes the escape character. Let's configure the PARAMETER_LIST parameter as below: And modify the shell script /tmp/test.sh as below: echo $1 is saying hello to $2! > /tmp/test.txt Re-deploy the Process Flow and run it. We will see that the generated /tmp/test.txt contains the following line: Bob is saying hello to Alice! In the example above, the parameters passed into the shell script are static. This case is not so useful because: instead of passing parameters, we can directly write the value of the parameters in the shell script. To make the case more meaningful, we can pass two dynamic parameters, that are obtained from the previous activity, to the shell script. Prepare the Process Flow as below: The Mapping activity MAPPING_1 has two output parameters: FROM_USER, TO_USER. The User Defined activity has two input parameters: FROM_USER, TO_USER. All the four parameters are of String type. Additionally, the Process Flow has two string variables: VARIABLE_FOR_FROM_USER, VARIABLE_FOR_TO_USER. Through VARIABLE_FOR_FROM_USER, the input parameter FROM_USER of USER_DEFINED gets value from output parameter FROM_USER of MAPPING_1. We achieve this by binding both parameters to VARIABLE_FOR_FROM_USER. See the two figures below. In the same way, through VARIABLE_FOR_TO_USER, the input parameter TO_USER of USER_DEFINED gets value from output parameter TO_USER of MAPPING_1. Also, we need to change the PARAMETER_LIST of the User Defined activity like below: Now, the shell script is getting input from the Mapping activity dynamically. Deploy the Process Flow and all of its necessary dependees then run the Process Flow. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! 'USER B' and 'USER A' are two outputs of the Mapping execution. Write the shell script within Oracle Warehouse Builder In the previous section, the shell script is located in the /tmp directory. But sometimes, when the shell script is small, or for the sake of maintaining consistency, you may want to keep the shell script inside Oracle Warehouse Builder. We can achieve this by configuring these three parameters of a User Defined activity properly: COMMAND: Set the path of interpreter, by which the shell script will be interpreted. PARAMETER_LIST: Set it blank. SCRIPT: Enter the shell script content. Note that in Linux the shell script content is passed into the interpreter as standard input at runtime. About how to actually pass parameters to the shell script, we can utilize variable substitutions. As in the following figure, ${FROM_USER} will be replaced by the value of the FROM_USER input parameter of the User Defined activity. So will the ${TO_USER} symbol. Besides the custom substitution variables, OWB also provide some system pre-defined substitution variables. You can refer to the online document for that. Deploy the Process Flow and run it. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! Leverage the return value of User Defined activity All of the previous sections are connecting the User Defined activity to END_SUCCESS with an unconditional transition. But what should we do if we want different subsequent activities for different shell script execution results? 1.  The simplest way is to add three simple-conditioned out-going transitions for the User Defined activity just like the figure below. In the figure, to simplify the scenario, we connect the User Defined activity to three End activities. Basically, if the shell script ends successfully, the whole Process Flow will end at END_SUCCESS, otherwise, the whole Process Flow will end at END_ERROR (in our case, ending at END_WARNING seldom happens). In the real world, we can add more complex and meaningful subsequent business logic. 2.  Or we can utilize complex conditions to work with different results of the User Defined activity. Previously, in our script, we only have this line: echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt We can add more logic in it and return different values accordingly. echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt if CONDITION_1 ; then ...... exit 0 fi if CONDITION_2 ; then ...... exit 2 fi if CONDITION_3 ; then ...... exit 3 fi After that we can leverage the result by checking RESULT_CODE in condition expression of those out-going transitions. Let's suppose that we have the Process Flow as the following graph (SUB_PROCESS_n stands for more different further processes): We can set complex condition for the transition from USER_DEFINED to SUB_PROCESS_1 like this: Other transitions can be set in the same way. Note that, in our shell script, we return 0, 2 and 3, but not 1. As in Linux system, if the shell script comes across a system error like IO error, the return value will be 1. We can explicitly handle such a return value. Summary Let's summarize what has been discussed in this article: How to create a Process Flow with a User Defined activity in it How to pass parameters from the prior activity to the User Defined activity and finally into the shell script How to write the shell script within Oracle Warehouse Builder How to do variable substitutions How to let the User Defined activity return different values and in what way can we leverage

    Read the article

  • Firefox for NTLM secured sites

    - by Sarang
    Spent the last weekend fighting to get firefox to connect to a sharepoint portal hosting my homegrown TFS instance's TFS/WEB and team project portal from a friends' place. Firefox is THE favourite browser and I was hating to se it fail miserably with NTLM authentication. Fun part is it showed the login prompt accepted credentials and like a pestering young puppy came back for the same credentials. After banging my head and various "I don't know what I don't know" attempts I decided to play god and entered the firefox's advance config mode. And voila! there sits a nifty little option called network.automatic-ntlm-auth.trusted-uris. Assign your URI to it and you are through. No more shameface before those Chrome/Opera users. :). To enter FireFox's god mode, open a new tab and type about:config in the address bar. There is a search box which certainly comes handy shifting through hundreds of options. The root lies in firefox's default mechanism of not allowing NTLM passthrough authentication. Firefox defaults to digest credentials which are blatantly refused by a web app expecting NTLM which results in authentication failure and Firefox keeps asking for credentials over and over again. The steps listed above are same as adding a website to your trusted sites' list in Internet Explorer.

    Read the article

  • #twitter for Windows Phone 7 protips (#wp7)

    - by Laurent Bugnion
    I started tweeting a list of “protips” (or whatever you want to call that) related to the Twitter for Windows Phone 7 application. Since I worked as integrator on this app, my tasks involved integrating design assets in all screens, and so I had an insider view on all the screens (and that is really a LOT of screens :) Seeing some comments about the app made me understand that most users out there don’t realize how rich the application is, and how many features are available. So without further ado, here we go, a list of Twitter for WP7 protips: (note: I will extend the list if I think of new stuff, and maybe add some screenshots later). Check the dark theme in the application settings! Select a tweet, menu, Translate. Search, Nearby looks for tweets near you Custom searches can be saved. They synch up with web twitter too! Multi language support, independant from OS. supports EN, FR, DE, IT, ES Multiple accounts are supported, simply define them in the Settings Even without a Twitter account, experience is super rich. Trends, Suggested, Nearby, searches etc... Select a tweet, then press Replies To to see the whole conversation Compose, menu, Hashtags. Enter a hashtag and press Add. List is saved for the next time. Select a tweet with location info (like my own). Press the location name to see all Nearby tweets Want to remove location information just for one tweet? Press on the Places button in app bar then Clear Place Settings, General to toggle between Username/Fullname display, Relative/Absolute date/time and more Upload a picture directly from compose screen to TwitPic, yFrog or TweetPhoto (service selection in Settings) Settings, About, Support to see a log of app errors and email it to support (use wisely please) Tap your username to see your profile. Then Menu, Edit Profile to edit your info, including your picture Tap on any user's name to see his profile, tweets, mentions and favorites in a Pivot Happy Tweeting! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • TOTD #166: Using NoSQL database in your Java EE 6 Applications on GlassFish - MongoDB for now!

    - by arungupta
    The Java EE 6 platform includes Java Persistence API to work with RDBMS. The JPA specification defines a comprehensive API that includes, but not restricted to, how a database table can be mapped to a POJO and vice versa, provides mechanisms how a PersistenceContext can be injected in a @Stateless bean and then be used for performing different operations on the database table and write typesafe queries. There are several well known advantages of RDBMS but the NoSQL movement has gained traction over past couple of years. The NoSQL databases are not intended to be a replacement for the mainstream RDBMS. As Philosophy of NoSQL explains, NoSQL database was designed for casual use where all the features typically provided by an RDBMS are not required. The name "NoSQL" is more of a category of databases that is more known for what it is not rather than what it is. The basic principles of NoSQL database are: No need to have a pre-defined schema and that makes them a schema-less database. Addition of new properties to existing objects is easy and does not require ALTER TABLE. The unstructured data gives flexibility to change the format of data any time without downtime or reduced service levels. Also there are no joins happening on the server because there is no structure and thus no relation between them. Scalability and performance is more important than the entire set of functionality typically provided by an RDBMS. This set of databases provide eventual consistency and/or transactions restricted to single items but more focus on CRUD. Not be restricted to SQL to access the information stored in the backing database. Designed to scale-out (horizontal) instead of scale-up (vertical). This is important knowing that databases, and everything else as well, is moving into the cloud. RBDMS can scale-out using sharding but requires complex management and not for the faint of heart. Unlike RBDMS which require a separate caching tier, most of the NoSQL databases comes with integrated caching. Designed for less management and simpler data models lead to lower administration as well. There are primarily three types of NoSQL databases: Key-Value stores (e.g. Cassandra and Riak) Document databases (MongoDB or CouchDB) Graph databases (Neo4J) You may think NoSQL is panacea but as I mentioned above they are not meant to replace the mainstream databases and here is why: RDBMS have been around for many years, very stable, and functionally rich. This is something CIOs and CTOs can bet their money on without much worry. There is a reason 98% of Fortune 100 companies run Oracle :-) NoSQL is cutting edge, brings excitement to developers, but enterprises are cautious about them. Commercial databases like Oracle are well supported by the backing enterprises in terms of providing support resources on a global scale. There is a full ecosystem built around these commercial databases providing training, performance tuning, architecture guidance, and everything else. NoSQL is fairly new and typically backed by a single company not able to meet the scale of these big enterprises. NoSQL databases are good for CRUDing operations but business intelligence is extremely important for enterprises to stay competitive. RDBMS provide extensive tooling to generate this data but that was not the original intention of NoSQL databases and is lacking in that area. Generating any meaningful information other than CRUDing require extensive programming. Not suited for complex transactions such as banking systems or other highly transactional applications requiring 2-phase commit. SQL cannot be used with NoSQL databases and writing simple queries can be involving. Enough talking, lets take a look at some code. This blog has published multiple blogs on how to access a RDBMS using JPA in a Java EE 6 application. This Tip Of The Day (TOTD) will show you can use MongoDB (a document-oriented database) with a typical 3-tier Java EE 6 application. Lets get started! The complete source code of this project can be downloaded here. Download MongoDB for your platform from here (1.8.2 as of this writing) and start the server as: arun@ArunUbuntu:~/tools/mongodb-linux-x86_64-1.8.2/bin$./mongod./mongod --help for help and startup optionsSun Jun 26 20:41:11 [initandlisten] MongoDB starting : pid=11210port=27017 dbpath=/data/db/ 64-bit Sun Jun 26 20:41:11 [initandlisten] db version v1.8.2, pdfile version4.5Sun Jun 26 20:41:11 [initandlisten] git version:433bbaa14aaba6860da15bd4de8edf600f56501bSun Jun 26 20:41:11 [initandlisten] build sys info: Linuxbs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 2017:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41Sun Jun 26 20:41:11 [initandlisten] waiting for connections on port 27017Sun Jun 26 20:41:11 [websvr] web admin interface listening on port 28017 The default directory for the database is /data/db and needs to be created as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db You can specify a different directory using "--dbpath" option. Refer to Quickstart for your specific platform. Using NetBeans, create a Java EE 6 project and make sure to enable CDI and add JavaServer Faces framework. Download MongoDB Java Driver (2.6.3 of this writing) and add it to the project library by selecting "Properties", "LIbraries", "Add Library...", creating a new library by specifying the location of the JAR file, and adding the library to the created project. Edit the generated "index.xhtml" such that it looks like: <h1>Add a new movie</h1><h:form> Name: <h:inputText value="#{movie.name}" size="20"/><br/> Year: <h:inputText value="#{movie.year}" size="6"/><br/> Language: <h:inputText value="#{movie.language}" size="20"/><br/> <h:commandButton actionListener="#{movieSessionBean.createMovie}" action="show" title="Add" value="submit"/></h:form> This page has a simple HTML form with three text boxes and a submit button. The text boxes take name, year, and language of a movie and the submit button invokes the "createMovie" method of "movieSessionBean" and then render "show.xhtml". Create "show.xhtml" ("New" -> "Other..." -> "Other" -> "XHTML File") such that it looks like: <head> <title><h1>List of movies</h1></title> </head> <body> <h:form> <h:dataTable value="#{movieSessionBean.movies}" var="m" > <h:column><f:facet name="header">Name</f:facet>#{m.name}</h:column> <h:column><f:facet name="header">Year</f:facet>#{m.year}</h:column> <h:column><f:facet name="header">Language</f:facet>#{m.language}</h:column> </h:dataTable> </h:form> This page shows the name, year, and language of all movies stored in the database so far. The list of movies is returned by "movieSessionBean.movies" property. Now create the "Movie" class such that it looks like: import com.mongodb.BasicDBObject;import com.mongodb.BasicDBObject;import com.mongodb.DBObject;import javax.enterprise.inject.Model;import javax.validation.constraints.Size;/** * @author arun */@Modelpublic class Movie { @Size(min=1, max=20) private String name; @Size(min=1, max=20) private String language; private int year; // getters and setters for "name", "year", "language" public BasicDBObject toDBObject() { BasicDBObject doc = new BasicDBObject(); doc.put("name", name); doc.put("year", year); doc.put("language", language); return doc; } public static Movie fromDBObject(DBObject doc) { Movie m = new Movie(); m.name = (String)doc.get("name"); m.year = (int)doc.get("year"); m.language = (String)doc.get("language"); return m; } @Override public String toString() { return name + ", " + year + ", " + language; }} Other than the usual boilerplate code, the key methods here are "toDBObject" and "fromDBObject". These methods provide a conversion from "Movie" -> "DBObject" and vice versa. The "DBObject" is a MongoDB class that comes as part of the mongo-2.6.3.jar file and which we added to our project earlier.  The complete javadoc for 2.6.3 can be seen here. Notice, this class also uses Bean Validation constraints and will be honored by the JSF layer. Finally, create "MovieSessionBean" stateless EJB with all the business logic such that it looks like: package org.glassfish.samples;import com.mongodb.BasicDBObject;import com.mongodb.DB;import com.mongodb.DBCollection;import com.mongodb.DBCursor;import com.mongodb.DBObject;import com.mongodb.Mongo;import java.net.UnknownHostException;import java.util.ArrayList;import java.util.List;import javax.annotation.PostConstruct;import javax.ejb.Stateless;import javax.inject.Inject;import javax.inject.Named;/** * @author arun */@Stateless@Namedpublic class MovieSessionBean { @Inject Movie movie; DBCollection movieColl; @PostConstruct private void initDB() throws UnknownHostException { Mongo m = new Mongo(); DB db = m.getDB("movieDB"); movieColl = db.getCollection("movies"); if (movieColl == null) { movieColl = db.createCollection("movies", null); } } public void createMovie() { BasicDBObject doc = movie.toDBObject(); movieColl.insert(doc); } public List<Movie> getMovies() { List<Movie> movies = new ArrayList(); DBCursor cur = movieColl.find(); System.out.println("getMovies: Found " + cur.size() + " movie(s)"); for (DBObject dbo : cur.toArray()) { movies.add(Movie.fromDBObject(dbo)); } return movies; }} The database is initialized in @PostConstruct. Instead of a working with a database table, NoSQL databases work with a schema-less document. The "Movie" class is the document in our case and stored in the collection "movies". The collection allows us to perform query functions on all movies. The "getMovies" method invokes "find" method on the collection which is equivalent to the SQL query "select * from movies" and then returns a List<Movie>. Also notice that there is no "persistence.xml" in the project. Right-click and run the project to see the output as: Enter some values in the text box and click on enter to see the result as: If you reached here then you've successfully used MongoDB in your Java EE 6 application, congratulations! Some food for thought and further play ... SQL to MongoDB mapping shows mapping between traditional SQL -> Mongo query language. Tutorial shows fun things you can do with MongoDB. Try the interactive online shell  The cookbook provides common ways of using MongoDB In terms of this project, here are some tasks that can be tried: Encapsulate database management in a JPA persistence provider. Is it even worth it because the capabilities are going to be very different ? MongoDB uses "BSonObject" class for JSON representation, add @XmlRootElement on a POJO and how a compatible JSON representation can be generated. This will make the fromXXX and toXXX methods redundant.

    Read the article

  • TOTD #166: Using NoSQL database in your Java EE 6 Applications on GlassFish - MongoDB for now!

    - by arungupta
    The Java EE 6 platform includes Java Persistence API to work with RDBMS. The JPA specification defines a comprehensive API that includes, but not restricted to, how a database table can be mapped to a POJO and vice versa, provides mechanisms how a PersistenceContext can be injected in a @Stateless bean and then be used for performing different operations on the database table and write typesafe queries. There are several well known advantages of RDBMS but the NoSQL movement has gained traction over past couple of years. The NoSQL databases are not intended to be a replacement for the mainstream RDBMS. As Philosophy of NoSQL explains, NoSQL database was designed for casual use where all the features typically provided by an RDBMS are not required. The name "NoSQL" is more of a category of databases that is more known for what it is not rather than what it is. The basic principles of NoSQL database are: No need to have a pre-defined schema and that makes them a schema-less database. Addition of new properties to existing objects is easy and does not require ALTER TABLE. The unstructured data gives flexibility to change the format of data any time without downtime or reduced service levels. Also there are no joins happening on the server because there is no structure and thus no relation between them. Scalability and performance is more important than the entire set of functionality typically provided by an RDBMS. This set of databases provide eventual consistency and/or transactions restricted to single items but more focus on CRUD. Not be restricted to SQL to access the information stored in the backing database. Designed to scale-out (horizontal) instead of scale-up (vertical). This is important knowing that databases, and everything else as well, is moving into the cloud. RBDMS can scale-out using sharding but requires complex management and not for the faint of heart. Unlike RBDMS which require a separate caching tier, most of the NoSQL databases comes with integrated caching. Designed for less management and simpler data models lead to lower administration as well. There are primarily three types of NoSQL databases: Key-Value stores (e.g. Cassandra and Riak) Document databases (MongoDB or CouchDB) Graph databases (Neo4J) You may think NoSQL is panacea but as I mentioned above they are not meant to replace the mainstream databases and here is why: RDBMS have been around for many years, very stable, and functionally rich. This is something CIOs and CTOs can bet their money on without much worry. There is a reason 98% of Fortune 100 companies run Oracle :-) NoSQL is cutting edge, brings excitement to developers, but enterprises are cautious about them. Commercial databases like Oracle are well supported by the backing enterprises in terms of providing support resources on a global scale. There is a full ecosystem built around these commercial databases providing training, performance tuning, architecture guidance, and everything else. NoSQL is fairly new and typically backed by a single company not able to meet the scale of these big enterprises. NoSQL databases are good for CRUDing operations but business intelligence is extremely important for enterprises to stay competitive. RDBMS provide extensive tooling to generate this data but that was not the original intention of NoSQL databases and is lacking in that area. Generating any meaningful information other than CRUDing require extensive programming. Not suited for complex transactions such as banking systems or other highly transactional applications requiring 2-phase commit. SQL cannot be used with NoSQL databases and writing simple queries can be involving. Enough talking, lets take a look at some code. This blog has published multiple blogs on how to access a RDBMS using JPA in a Java EE 6 application. This Tip Of The Day (TOTD) will show you can use MongoDB (a document-oriented database) with a typical 3-tier Java EE 6 application. Lets get started! The complete source code of this project can be downloaded here. Download MongoDB for your platform from here (1.8.2 as of this writing) and start the server as: arun@ArunUbuntu:~/tools/mongodb-linux-x86_64-1.8.2/bin$./mongod./mongod --help for help and startup optionsSun Jun 26 20:41:11 [initandlisten] MongoDB starting : pid=11210port=27017 dbpath=/data/db/ 64-bit Sun Jun 26 20:41:11 [initandlisten] db version v1.8.2, pdfile version4.5Sun Jun 26 20:41:11 [initandlisten] git version:433bbaa14aaba6860da15bd4de8edf600f56501bSun Jun 26 20:41:11 [initandlisten] build sys info: Linuxbs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 2017:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41Sun Jun 26 20:41:11 [initandlisten] waiting for connections on port 27017Sun Jun 26 20:41:11 [websvr] web admin interface listening on port 28017 The default directory for the database is /data/db and needs to be created as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db You can specify a different directory using "--dbpath" option. Refer to Quickstart for your specific platform. Using NetBeans, create a Java EE 6 project and make sure to enable CDI and add JavaServer Faces framework. Download MongoDB Java Driver (2.6.3 of this writing) and add it to the project library by selecting "Properties", "LIbraries", "Add Library...", creating a new library by specifying the location of the JAR file, and adding the library to the created project. Edit the generated "index.xhtml" such that it looks like: <h1>Add a new movie</h1><h:form> Name: <h:inputText value="#{movie.name}" size="20"/><br/> Year: <h:inputText value="#{movie.year}" size="6"/><br/> Language: <h:inputText value="#{movie.language}" size="20"/><br/> <h:commandButton actionListener="#{movieSessionBean.createMovie}" action="show" title="Add" value="submit"/></h:form> This page has a simple HTML form with three text boxes and a submit button. The text boxes take name, year, and language of a movie and the submit button invokes the "createMovie" method of "movieSessionBean" and then render "show.xhtml". Create "show.xhtml" ("New" -> "Other..." -> "Other" -> "XHTML File") such that it looks like: <head> <title><h1>List of movies</h1></title> </head> <body> <h:form> <h:dataTable value="#{movieSessionBean.movies}" var="m" > <h:column><f:facet name="header">Name</f:facet>#{m.name}</h:column> <h:column><f:facet name="header">Year</f:facet>#{m.year}</h:column> <h:column><f:facet name="header">Language</f:facet>#{m.language}</h:column> </h:dataTable> </h:form> This page shows the name, year, and language of all movies stored in the database so far. The list of movies is returned by "movieSessionBean.movies" property. Now create the "Movie" class such that it looks like: import com.mongodb.BasicDBObject;import com.mongodb.BasicDBObject;import com.mongodb.DBObject;import javax.enterprise.inject.Model;import javax.validation.constraints.Size;/** * @author arun */@Modelpublic class Movie { @Size(min=1, max=20) private String name; @Size(min=1, max=20) private String language; private int year; // getters and setters for "name", "year", "language" public BasicDBObject toDBObject() { BasicDBObject doc = new BasicDBObject(); doc.put("name", name); doc.put("year", year); doc.put("language", language); return doc; } public static Movie fromDBObject(DBObject doc) { Movie m = new Movie(); m.name = (String)doc.get("name"); m.year = (int)doc.get("year"); m.language = (String)doc.get("language"); return m; } @Override public String toString() { return name + ", " + year + ", " + language; }} Other than the usual boilerplate code, the key methods here are "toDBObject" and "fromDBObject". These methods provide a conversion from "Movie" -> "DBObject" and vice versa. The "DBObject" is a MongoDB class that comes as part of the mongo-2.6.3.jar file and which we added to our project earlier.  The complete javadoc for 2.6.3 can be seen here. Notice, this class also uses Bean Validation constraints and will be honored by the JSF layer. Finally, create "MovieSessionBean" stateless EJB with all the business logic such that it looks like: package org.glassfish.samples;import com.mongodb.BasicDBObject;import com.mongodb.DB;import com.mongodb.DBCollection;import com.mongodb.DBCursor;import com.mongodb.DBObject;import com.mongodb.Mongo;import java.net.UnknownHostException;import java.util.ArrayList;import java.util.List;import javax.annotation.PostConstruct;import javax.ejb.Stateless;import javax.inject.Inject;import javax.inject.Named;/** * @author arun */@Stateless@Namedpublic class MovieSessionBean { @Inject Movie movie; DBCollection movieColl; @PostConstruct private void initDB() throws UnknownHostException { Mongo m = new Mongo(); DB db = m.getDB("movieDB"); movieColl = db.getCollection("movies"); if (movieColl == null) { movieColl = db.createCollection("movies", null); } } public void createMovie() { BasicDBObject doc = movie.toDBObject(); movieColl.insert(doc); } public List<Movie> getMovies() { List<Movie> movies = new ArrayList(); DBCursor cur = movieColl.find(); System.out.println("getMovies: Found " + cur.size() + " movie(s)"); for (DBObject dbo : cur.toArray()) { movies.add(Movie.fromDBObject(dbo)); } return movies; }} The database is initialized in @PostConstruct. Instead of a working with a database table, NoSQL databases work with a schema-less document. The "Movie" class is the document in our case and stored in the collection "movies". The collection allows us to perform query functions on all movies. The "getMovies" method invokes "find" method on the collection which is equivalent to the SQL query "select * from movies" and then returns a List<Movie>. Also notice that there is no "persistence.xml" in the project. Right-click and run the project to see the output as: Enter some values in the text box and click on enter to see the result as: If you reached here then you've successfully used MongoDB in your Java EE 6 application, congratulations! Some food for thought and further play ... SQL to MongoDB mapping shows mapping between traditional SQL -> Mongo query language. Tutorial shows fun things you can do with MongoDB. Try the interactive online shell  The cookbook provides common ways of using MongoDB In terms of this project, here are some tasks that can be tried: Encapsulate database management in a JPA persistence provider. Is it even worth it because the capabilities are going to be very different ? MongoDB uses "BSonObject" class for JSON representation, add @XmlRootElement on a POJO and how a compatible JSON representation can be generated. This will make the fromXXX and toXXX methods redundant.

    Read the article

  • Recreating OMS instances in a HA environment when instances on all nodes are lost

    - by rnigam
    Oracle highly recommends deploying EM in a HA environment. The best practices for HA deployments, backup and housekeeping of your Enterprise Manager environment are documented in the Oracle Enterprise Manager Advanced Configuration Guide. It is imperative that there is a good disaster recovery plan in place for your EM deployment. In this post I want to talk about a customer who failed to do the correct planning and housekeeping for EM and landed in a situation where we the all the OMSes were nearly blown away had we not jumped to help. We recently hit an issue at a customer site where we had a two node OMS setup of the Enterprise Manager and a RAC Database being used as the EM repository. An accidental delete of the OMS oracle home left us with a single node deployment. While we were trying to figure out a possible path to recover the first node, the second node was rebooted under a maintenance window. What followed was a complete site outage as the Admin and managed servers would not start on either of the nodes. In my situation there were - No backups of the Oracle Homes from any node - No OMS Configuration snapshots (created using the “emctl exportconfig oms” command) and the instance home was completely lost on node 1 which also had the Admin Server  We did however have: - A copy of the emkey.ora that I found under the OMS_ORACLE_HOME/ of the second node (NOTE: it is a bad practice to have your emkey present under the OMS Oracle home directory on the same server as the OMS. The backup of the emkey should be maintained on some other server. In this case however it was a savior in my situation since there were no backups - The oms oracle home on the second node but missing a number of files and had a number of changes done to the files in the home. There were a number of attempts to start the server by modifying various files based on the Weblogic server logs to have atleast node up and running but all of them failed. Here is how you can recover from this scenario: Follow these steps: STEP 1: Check status of emkey.ora Check whether the emkey exists is present in the EM repository or not. Run the following command: $OMS_ORACLE_HOME/bin/emctl status emkey If the output is something like this below then you are good to go and the key is present in the repository ./emctl status emkey Oracle Enterprise Manager 11g Release 1 Grid Control Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. Enter Enterprise Manager Root (SYSMAN) Password : The EMKey is configured properly. Here are the messages that you might see as the emctl status emkey output depending upon whether the EM Admin Server is up and if the key is configured properly: Case1:  AdminServer is up, emkey is proper in CredStore & not in repos. This is same as the output of the command shown above:The EMKey is configured properly Case 2: AdminServer is up, emkey is proper in CredStore & exists in repos:The EMKey is configured properly, but is not secure. Secure the EMKey by running "emctl config emkey -remove_from_repos".Case 3: AdminServer is down or emkey is corrupted in CredStore) & (emkey exists in repos): The EMKey exists in the Management Repository, but is not configured properly or is corrupted in the credential store.Configure the EMKey by running "emctl config emkey -copy_to_credstore".Case 4: (AdminServer is down or emkey is corrupted in CredStore) & (emkey does not exist in repos): The EMKey is not configured properly or is corrupted in the credential store and does not exist in the Management Repository. To correct the problem:1) Get the backed up emkey.ora file.2) Configure the emkey by running "emctl config emkey -copy_to_credstore_from_file". If not the key was not secured properly, we will have to be put in the repository before proceeding. Look at the next step 2 for doing this There may be cases (like mine) where running emctl may give errors like the following: $OMS_ORACLE_HOME/bin/emctl status emkey Exception in thread “Main Thread” java.lang.NoClassDefFoundError: oracle/security/pki/OracleWallet At oracle.sysman.emctl.config.oms.EMKeyCmds.main (EMKeyCmds.java:658) Just move to the next step to put the key back in the repository STEP 2: Put emkey.ora back in the repository Skip this step if your emkey.ora is present in the repository. If not, you need to put the key back in the repository See if you can run the following command (with sample output): $OMS_ORACLE_HOME/bin/emctl config emkey –copy_to_repos Oracle Enterprise Manager 11g Release 1 Grid Control Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. The EMKey has been copied to the Management Repository. This operation will cause the EMKey to become unsecure. After the required operation has been completed, secure the EMKey by running "emctl config emkey -remove_from_repos". Typically the key is present under $OMS_ORACLE_HOME/sysman/config directory before being removed after the install as a best practice. If you hit any errors while running emctl commands like the one mentioned in step 1, jump to step 3 and we will take care of the emkey.ora in Step 5 STEP 3: Get the port information Check for the existing port information in the emd.properties file under EM_INSTANCE_DIRECTORY (typically gc_inst directory right above the Middleware home where you have deployed em. For eg. /u01/app/oracle/product/gc_inst in case your oms home is /u01/app/oracle/product/Middleware/oms11g) In my case I got the information from the emgc.properties present in the gc_inst on the second node. If you can run emctl you may want to try the following command as well $OMS_ORACLE_HOME/bin/emctl status oms –details Note this information as this will be used in the next step STEP 4: Perform cleanup on Node 1 Note the oracle home of the Weblogic and OMS, get the list of applied patches in the homes (using opatch lsinventory command), take a backup copy of the home just in case we need it and then de-install/remove oracle homes, update inventory and cleanup processes on the first node STEP 5: Perform Software Only Installation of OMS on Node 1 Perform Weblogic 10.3.2 installation exactly under the same location as present in the earlier installation. Perform software only installation of the OMS using the following command. This will not run any configuration assistants and bypass all user interface validations runInstaller –noconfig -validationaswarnings Select the “Additional OMS” option while performing the installation. Provide the same path for OMS and Instance directories like the previous installation Use the port information collected in Step 3 while performing the installation. Once the installation is complete run the allroot.sh script to complete the binary deployment STEP 6: Apply one-off patches At this point you can apply any patches to the OMS Oracle Home previously. You only need to run opatch to install the patch in the home and not required to run the SQLs STEP 7: Copy EM key This step is only required if you were not able to use emctl command to put the emkey back into the EM repository in STEP 2 Copy the emkey.ora file of the old installation you have under $OMS_ORACLE_HOME/sysman/config directory of the newly installed OMS STEP 8: Configure Grid Control Domain Run the following command to configure the EM domain and OMS. Note that you need to use a different GC Domain name than what you used earlier. For example I have used GCDOMAIN11 as the new domain name when my previous domain name was GCDOMAIN $OMS_ORACLE_HOME/bin/omsca new –AS_USERNAME weblogic –EM_DOMAIN_NAME GCDOMAIN11 –NM_USER nodemanager -nostart This command as shown below will prompt for a number of inputs like Admin Server hostname, port, password, etc. Verify if the defaults shown are correct by pressing enter or provide a new value STEP 9: Run Add-ON Configuration Assistant After this step run the following add-on configuration assistant. This was used in my case to configure the virtualization add-on $OMS_ORACLE_HOME/addonca -oui -omsonly -name vt -install gc STEP 10: Start the OMS Now start the OMS using $OMS_ORACLE_HOME/bin/emctl start oms In a multi-node setup like mine you would either have a software load balancer or DNS round robin (using a virtual host name that resolves to one of multiple OMS hostnames) being used for load balancing. Secure the OMS against the SLB or DNS virtual hostname using the following $ OMS_HOME/bin/emctl secure oms -host slb.example.com -secure_port 1159 -slb_port 1159 -slb_console_port 443 STEP 11: Configure the Agent From the $AGENT_ORACLE_HOME/bin run the ./agentca –f At this point you should have your OMS on node 1 fully re-covered. Clean up node 2 and use the normal Additional OMS installation process documented in the official installation guide to add the additional OMS on node 2 Summary It took us nearly a little over two days to completely recover the environment with some other non-EM related issues that hit us along the way as well. In the end a situation like this could have been completely avoided had the proper housekeeping and backup of the Enterprise Manager Deployment been done in the first place. This is going to a topic that we cover in the next post. In the meantime please do refer to the Oracle Enterprise Manager Advanced Configuration Guide for planning your EM installation, backup and housekeeping procedures. This can be found here: http://download.oracle.com/docs/cd/E11857_01/index.htm Thanks This post would not have been possible without Raj Aggarwal, Prasad Chebrolu and Ravikumar Basa who helped to recover the environment and provided all the support we needed

    Read the article

  • virtualbox, MAAS: help needed

    - by Roberto Attias
    Ok, I made some progress wrt the original question (still below). I found /etc/maas/dhcpd.conf contained option domain-name-servers 10.0.3.15, and changed it to 192.168.0.11. After restarting the daemon, I now see "node" getting the right DNS, unfortunately this doesn't fix the main problem, which I believe is the reference to 169.254.169.254. It does introduce a new question: while the remaining information from /etc/maas/dhcp.conf is present in the maas GUI, there is no field to enter the dns address. Why? Anyway, my original problem still stands... Any idea? Original question follows. In VirtualBox, I have: master VM: ubuntu 12.04.3 server eth0: Internal Network, IP= 192.168.0.11 eth1: NAT, IP= 10.0.3.15 eth2: Host-only, IP= 192.168.56.102 running MAAS region and cluster controlller, with DHCP and DNS enabled node VM: eth0: Internal Network node VM boots in PXEboot. DHCP succeeds, and the boot process starts, but during boot I see some issues. One of them is "disk drive not ready yet or not present" for / and /tmp. I've googled this issue, and some people say it happens when the fisical disk is a SSD, which is my case. Anywaythe system seems to recover from this eventually. Immediately after it starts printing a lot of messages of the form: 2013-10-01 16:52:37,142 - url_helper.py[WARNING]: Calling 'http://169.254.168.254/2009-04-04/meta-data/instance-id failed [x/y]: url error [[Errno 113] No route to host] That IP address is clearly bogous, not sure where it came from. Before that point, I had seen the following network configuration: address: 192.168.0.100 broadcast: 192.168.0.255 netmask: 255.255.255.0 gateway: 192.168.0.1 dns0 : 10.0.3.15 dns1 : 0.0.0.0 Not sure if related, but the dns doesn't seem right, as node doesn't have an interface to reach 10.0.3.15. If that's the problem, what should I change to have the DNS point to 192.168.0.11? Thanks, Roberto

    Read the article

  • PCSX2 1.0.0 installation issues

    - by user205261
    I've followed all the tutorials I can find to get this emulator to work and I'm now getting this error. Granted I've gotten a lot further than when I started. Running 13.10. Just downloaded the Linux download file from the pcsx2 website and did the following in terminal: jonathan@Assassin:~$ sudo add-apt-repository ppa:gregory-hainaut/pcsx2.official.ppa [sudo] password for jonathan: The Official pcsx2 ppa, provided by the pcsx2 team. This ppa contains a regular package snapshot of pcsx2. We are not package experts, but we try to follow the debian policy. Press [ENTER] to continue or ctrl-c to cancel adding it gpg: keyring `/tmp/tmpe5fwdz/secring.gpg' created gpg: keyring `/tmp/tmpe5fwdz/pubring.gpg' created gpg: requesting key 7A617FF4 from hkp server keyserver.ubuntu.com gpg: /tmp/tmpe5fwdz/trustdb.gpg: trustdb created gpg: key 7A617FF4: public key "Launchpad official ppa for pcsx2 team" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) OK jonathan@Assassin:~$ sudo apt-get update Err http://ppa.launchpad.net saucy/main amd64 Packages 404 Not Found Err http://ppa.launchpad.net saucy/main i386 Packages 404 Not Found Fetched 67.4 kB in 16s (3,977 B/s) W: Failed to fetch ppa.launchpad.net/gregory-hainaut/pcsx2.official.ppa/ubuntu/dists/saucy/main/binary-amd64/Packages 404 Not Found W: Failed to fetch ppa.launchpad.net/gregory-hainaut/pcsx2.official.ppa/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. jonathan@Assassin:~$ sudo apt-get install pcsx2 Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package pcsx2 So I'm assuming I just need the way to get the two missing packages?

    Read the article

  • Quick guide to Oracle IRM 11g: Server installation

    - by Simon Thorpe
    Quick guide to Oracle IRM 11g index This is the first of a set of articles designed to assist with the successful installation, configuration and deployment of a document security solution using Oracle IRM. This article goes through a set of simple instructions which detail how to download, install and configure the IRM server, the starting point for building a document security solution. This article contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Downloading the software Preparing a database Creating the schema WebLogic Server installation Installing Oracle IRM Introduction Because we are using Oracle Enterprise Linux in this guide, and before we get into the detail of IRM, i'd like to share some tips with Linux to make life a bit easier.Use a 64bit platform, IRM 11g runs just fine on a 32bit server but with 64bit you will build a more future proof service. Download and install the latest Java JDK package. Make sure you get the 64bit version if you are on a 64bit server. Configure Linux to use a good Yum server to simplify installing packages. For Oracle Enterprise Linux we maintain a great public Yum here. Have at least 20GB of free disk space on the partition you intend to install the IRM server. The downloads are big, then you extract them and then install. This quickly consumes disk space which you can easily recover by deleting the downloaded and extracted files after wards. But it's nice to have the disk space spare to keep these around in case you need to restart any part of the installation process again. Downloading the software OK, so before you can do anything, you need the software install kits. Luckily Oracle allows you to freely download every technology we create. You'll need to get the following; Oracle WebLogic Server Oracle Database Oracle Repository Creation Utility (rcu) Oracle IRM server You can use Microsoft SQL server 2005 or 2008, in this guide i've used Oracle RDBMS 11gR2 for Linux. Preparing the database I'm not going to go through the finer points of installing the database. There are many very good guides on installing the Oracle Database. However one thing I would suggest you think about is enabling TDE, network encryption and using Database Vault. These Oracle database security technologies are excellent for creating a complete end to end security solution. No point in going to all the effort to secure document access with IRM when someone can go directly to the database and assign themselves rights to documents. To understand this further, you can see a video of the IRM service using these database security technologies here. With a database up and running we need to create a schema to hold the IRM data. This schema contains the rights model, cryptographic keys, user account id's and associated rights etc. Creating the IRM database schema Oracle uses the Repository Creation Tool which builds your schema, extract the files from the rcu zip. Then in a terminal window; cd /oracle/install/rcu/bin ./rcu This will launch the Repository Creation Tool and you will be presented with the image to the right. Hit next and continue onto the next dialog. You are asked if you are going to be creating a new schema or wish to drop an existing one, you obviously just need to click next at this point to create a new schema. The RCU next needs to know where your database is so you'll need the following details of your database instance. Below, for reference, is the information for my installation. Hostname: irm.oracle.demo Port: 1521 (This is the default TCP port for the Oracle Database) Service Name: irm.oracle.demo. Note this is not the SID, but the service name. Username: sys Password: ******** Role: SYSDBA And then select next. Because the RCU contains schemas for many of the Oracle Technologies, you now need to select to just deploy the Oracle IRM schema. Open the section under "Enterprise Content Management" and tick the "Oracle Information Rights Management" component. Note that you also get the chance to select a prefix which defaults to "DEV" (for development). I usually change this to something that reflects my own install. PROD for a production system, INT for internal only etc. The next step asks for the passwords for the schema users. We are only creating one schema here so you just enter one password. Some brave souls store this password in an Excel spreadsheet which is then secure against the IRM server you're about to install in this guide. Nearing the end of the schema creation is the mapping of the tablespaces to the schema. Note I had setup a table space already that was encrypted using TDE and at this point I was able to select that tablespace by clicking in the "Default Tablespace" column. The next dialog confirms your actions and clicking on next causes it to create the schema and default data. After this you are presented with the completion summary. WebLogic Server installation The database is now ready and the next step is to install the application server. Oracle IRM 11g is a JEE application and currently only supported in Oracle WebLogic Server. So the next step is get WebLogic Server installed, which is pretty easy. Depending on the version you download, you either run the binary or for a 64 bit platform (like mine) run the following command. java -d64 -jar wls1033_generic.jar And in the resulting dialog hit next to start walking through the install. Next choose a directory into which you will install WebLogic Server. I like to change from the default and install into /oracle/. Then all my software goes into this one folder, all owned by the "oracle" user. The next dialog asks for your Oracle support information to ensure you are kept up to date. If you have an Oracle support account, enter your details but for most evaluation systems I leave these fields blank. Again, for evaluation or development systems, I usually stick with the "Typical" install type which you are next asked for. Next you are asked for the JDK which will be used for the server. When installing from the generic jar on a 64bit platform like in this guide, no JDK is bundled with the installer. But as you can see in the image on the right, that it does a good job of detecting the one you've got installed. Defaults for the install directories are usually taken, no changes here, just click next. And finally we are ready to install, hit next, sit back and relax. Typically this takes about 10 minutes. After the install, do not run the quick start, we need to deploy the IRM install itself from which we will create a new WebLogic domain. For now just hit done and lets move to the final step of the installation process. Installing Oracle IRM The last piece of the puzzle to getting your environment ready is to deploy the IRM files themselves. Unzip the Oracle Enterprise Content Management 11g zip file and it will create a Disk1 directory. Switch to this folder and in the console run ./runInstaller. This will launch the installer which will also ask for the location of the JDK. Look at the image on the right for the detail. You should now see the first stage of the IRM installation. The dialog warns you need to have a WebLogic server installed and have created the schema's, but you've just done all that above (I hope) so we are ready to go. The installer now checks that you have all the required libraries installed and other system parameters are correct. Because nearly all of my development and evaluation installations have the database server on the same system, the installer passes these checks without issue... Next... Now chose where to install the IRM files, you must install into the same Middleware Home as the WebLogic Server installation you just performed. Usually the installer already defaults to this location anyway. I also tend to change the Oracle Home Directory to Oracle_IRM so it's clear this is just an IRM install. The summary page tells you about space needed to deploy the files. Unfortunately the IRM install comes with all of the other Oracle ECM software, you can't just select the IRM files, everything gets deployed to disk and uses 1.6GB of space! Not fun, but Oracle has to package up similar technologies otherwise we would have a very large number of installers to QA and manage, again, not fun. Hit Install, time for another drink, maybe a piece of cake or a donut... on a half decent system this part of the install took under 10 minutes. Finally the installation of your IRM server is complete, click on finish and the next phase is to create the WebLogic domain and start configuring your server. Now move onto the next article in this guide... configuring your IRM server ready to seal your first document.

    Read the article

  • Oracle Outsourced Repair Solution: The “Control Tower” for the Reverse Supply Chain

    - by John Murphy
    By Hannes Sandmeier, Vice President of cMRO and Depot Repair Development Smart businesses are increasing their focus on core competencies and aggressively cutting costs in their supply chains. Outsourcing repairs can enable a business to focus on what they do best and most profitably while delivering top-notch customer service through partners that specialize in reverse logistics and repair. A well managed “virtual service organization” can deliver fast turn times, lower costs and high customer satisfaction. A poorly managed partner network can deliver disaster for your business. Managing a virtual service organization requires accurate, real-time information and collaboration tools that enable smart, informed and immediate corrective action. To meet this need, Oracle has released the Oracle Outsourced Repair Solution to provide the “control tower” for managing outsourced reverse supply chain operations from customer complaint through remediation to partner claim settlement. The new solution provides real-time visibility to return status, location, turn time, discrepancies and partner performance. Additionally, its web portals allow partners and carriers to view assigned work, request parts, enter data, capture time and submit claims. Leveraging the combined power of Oracle E-Business Suite and Oracle E-Business Suite Extensions for Oracle Endeca, the Oracle Outsourced Repair Solution provides a comprehensive set of tools that range from quick online partner registration to partner claim reconciliation, from capturing parts and labor to Oracle Cost Management and Financials integration, and from part requisition to waste and hazmat controls. These tools empower service operations managers to: · Increase customer satisfaction Ensure customers are satisfied by holding partners accountable for the speed and quality of repairs, and taking immediate corrective action when things go wrong · Reduce costs: Remove waste from the repair process using accurate job cost and cost breakdown data · Increase return velocity: Users have the tools to view all orders in flight and immediately know the current location, status, owner and contact point for repairs so as to be able to remove bottlenecks, resolve discrepancies and manage escalations The Oracle Outsourced Repair Solution further demonstrates Oracle’s commitment to helping supply chain professionals and service managers deliver high customer satisfaction at the lowest cost. For more information on the Oracle Outsourced Repair Solution, visit here. 

    Read the article

  • Boot failure on installation from a burned iso image

    - by jdamae
    I'm encountering boot failure while trying to install a Linux distro from a CD. I'm using an older PC; here are its specs: HP Pavilion a255c 2.66GHz CPU, 512MB RAM with a BIOS revision of 6/30/2003 I reclaimed an older drive (Seagate ST340810A) that seems to be working, as it's recognized in the BIOS (auto-detected). So this is not the original HDD, but a replacement. I downloaded a mini.iso of Ubuntu 10.10 that I want to install, and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM]. I disabled devices 2-4 so I can just force it to read first from the CD-ROM. This old PC also has a separate CD writer which is a Sec.Slave. The Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned Linux CD. With these settings I cannot get it to boot. I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" when I start the pc with the cd (burned iso image). Would I be able to boot off a usb flash drive? Would that work?

    Read the article

  • Windows CE: SDK Doesn’t Show up in Visual Studio 2008

    - by Bruce Eitman
    A customer recently contacted me because after installing an SDK it didn’t show up in Visual Studio 2008.  So being a good vendor I installed VS2008 and then installed the SDK – no problem the SDK showed up and I could create projects based on it. I let the customer know that the SDK definitely works with VS2008. The customer got back to me and asked what OS I was using. Hmm, how could that play into this? I told him that I use Windows XP, and it turned out that he is way more modern than I am and is using both Windows Vista and 7. The customer opened a support case with Microsoft. The answer turns out to be that the SDK install requires the user to be logged on as an administrator when installing on Windows Vista and 7 for the SDK to show up in Visual Studio 2008. This problem does not seem to exist for Visual Studio 2005 on those operating systems. The actual instructions from Microsoft Support are: 1)      Make sure Visual Studio 2008 is not running. I also shut down the device emulator manager but you may not be using that. 2)      Open a “Visual Studio 2008 Command Prompt” as Administrator. On Windows 7 just right click the short cut and pick the “Run as administrator” option. 3)      Enter the following command: msiexec /log SDKInstallLog.txt /package <the path to your .msi file> 4)      When asked if you wish to do a custom or complete install pick custom 5)      Instruct the installer to omit the installation of the documentation. This was something I found about CE 6 SDK installation issue and may have no bearing upon your problem but I did it anyway. 6)      Install   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Using CheckPoint SNX with RSA SecurID Software Token to connect to VPN

    - by Vinnie
    I have a fairly specific issue that I'm hoping someone else out in the community has had to tackle with success. My company uses CheckPoint VPN clients on Windows XP machines with RSA SecurID software to generate the tokens. The beauty is that once you generate a token code on the software, you can enter it into any machine trying to connect via VPN and with your username get connected. So, I've got Ubuntu 10.10 32bit on a tower and formerly on a laptop. Through several posts around the web, I was able to get SNX installed on the laptop, plug in my server connection information and be asked for a password only to have the connection fail. I used to debug mode and was able to see that the application was trying to and failing at writing a registry value, but I believe that to be a symptom of a different issue, even though I tried to find a way to remedy that. I'm wondering if anyone out there is on a similar configuration and was able to connect with SNX using an RSA token? If so, what steps did you take to setup and what problems/solutions did you encounter?

    Read the article

  • How to Switch Chrome’s Default Search to International Google

    - by Erez Zukerman
    Google Chrome’s default search engine is Google. This makes perfect sense; the only problem is that it uses localized Google – for example, Google France or Google Israel. This impacts the interface language, and sometimes even the text orientation. Here’s how you can fix this and get “international” Google results with an English interface. First, we need to figure out what search query we’re going to use. Go to Google.com and execute a simple query for a single word – say “cats”. If you get real-time results, hit Enter so that the address bar updates with the query URL. It should look something like this: http://www.google.com/#sclient=psy&hl=en&site=&source=hp&q=cats&aq=f&aqi=g1g-s1g3&aql=&oq=&pbx=1&bav=on.2,or.&fp=369c8973645261b8 If you wish to customize your search further, click Advanced Search. For example, I would like Google to annotate results with the reading level they require, so I can see what’s going to be difficult to read: Latest Features How-To Geek ETC Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Lakeside Sunset in the Mountains [Wallpaper] Taskbar Meters Turn Your Taskbar into a System Resource Monitor Create Shortcuts for Your Favorite or Most Used Folders in Ubuntu Create Custom Sized Thumbnail Images with Simple Image Resizer [Cross-Platform] Etch a Circuit Board using a Simple Homemade Mixture Sync Blocker Stops iTunes from Automatically Syncing

    Read the article

  • Great Free Courses on Building HTML5 apps using ASP.NET Web API, Knockout.js and jQuery

    - by ScottGu
    Pluralsight has developed some great training courses on the new .NET 4.5 and VS 2012 release, including two fantastic courses from John Papa that cover how to build HTML5 web apps using ASP.NET Web API, Knockout and jQuery: Single Page Apps with HTML5, Web API, Knockout and jQuery Building HTML5 and JavaScript Apps with MVVM and Knockout Free 1-Month Subscription to the Courses Pluralsight is offering a special promotion that allows you to get a free 1-month subscription to watch the above courses at no cost.  There is no obligation to buy anything at the end of the offer and you don’t need to supply a credit card in order to take part in it. To get access to the course you simply follow @pluralsight and @john_papa on Twitter and then visit this page and enter your Twitter name using the form on it.  Pluralsight will then send you a private twitter message containing the access code that you can use to subscribe to the courses (and download the course exercise files).  Once you are subscribed to the course you have one month to watch the course (and you can watch it as many times as you want during the month). Pluralsight is running the promotion through Sept 18th – so sign-up now to get access.  Once you are signed up you then have a month to watch the course. Hope this helps, Scott P.S. And if you are new to Twitter you can also optionally follow me: @scottgu

    Read the article

  • Oracle @ AIIM Conference

    - by [email protected]
    Oracle will be at the AIIM Conference and Exposition next week in Philadelphia. On the opening morning, Robert Shimp, Group Vice President, Global Technology Business Unit, of Oracle Corporation, will moderate an executive keynote panel. Mr. Shimp will lead four Oracle customer executives through a lively discussion of how innovative organizations are driving the integration of content management with their core business processes on Tuesday April 20th at 8:45 AM. Our panelists are: CINDY BIXLER, CIO, Embry Riddle Aeronautical University TOM SHOWALTER, Managing Director, JP Morgan Chase IRFAN MOTIWALA, Vice President, Moody's Investors Service MIT MONICA CROCKER, CRM, PMP, Corporate Records Manager, Land O'Lakes For more information on our panelists, click here. Oracle will be in booth #2113 at the AIIM Expo. Come by and enter the daily raffle to win a Netbook! Oracle and Oracle partners will demonstrate solutions that increase productivity, reduce costs and ensure compliance for business processes such as accounts payable, human resource onboarding, marketing campaigns, sales management, large scale diagrams for facilities and manufacturing, case management, and others Oracle products including Oracle Universal Content Management, Oracle Imaging and Process Management, Oracle Universal Records Management, Oracle WebCenter, Oracle AutoVue, and Oracle Secure Enterprise Search will be demonstrated in the booth. Oracle will host a private event at The Field House Sports Bar - see your Oracle representative for more details Oracle customers can meet in private meeting rooms with their Oracle representatives Key Sessions Besides the opening morning keynote panel, Oracle will have a number of other sessions at the conference. Oracle Content Management will be featured in the session G08 - A Passage to Improving Healthcare: Enhancing EMR with Electronic Records Wednesday April 21st 2:25PM-3:10PM Kristina Parma of Oracle partner ImageSource will deliver this session, along with Pam Doyle of Fujitsu and Nancy Gladish of Swedish Medical Center. Kristina will also be in the Oracle booth to talk about this solution. On Tuesday April 20th at 4:05 PM Ajay Gandhi of Oracle will deliver a session entitled Harnessing SharePoint Content for Enterprise Processes in PeopleSoft, Siebel, E-Business Suite and JD Edwards Tuesday April 20th 1:15PM-1:45PM - Bringing Content Management to Your AP, HR, Sales and Marketing Processes - Application Showcase Theater (on the AIIM Expo Floor - Booth 1549 Wednesday April 21st 12:30PM-1:00PM - Embed and Edit Content Anywhere - Application Showcase Theater (on the AIIM Expo Floor - Booth 1549 For more information, see the AIIM Expo page on the Oracle website.

    Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >