Search Results

Search found 4727 results on 190 pages for 'newbie py'.

Page 158/190 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Apache2, FastCGI, PHP-FPM, APC on virtualmin panel with nginx front end reverse proxy

  - by Ünsal Korkmaz

  My dream setup: php 5.3.6 + mysql 5.5.10 on Apache2, FastCGI, PHP-FPM, APC with nginx 1.0 front end reverse proxy. And as free server management panel: Virtualmin GPL on centos 5.6 In a new centos 5.6 setup. Using this code for installing virtualmin: wget http://software.virtualmin.com/gpl/scripts/install.sh chmod +x install.sh ./install.sh After setup, i see php is 5.1 and mysql is 5.0 version. And system not supporting php-fpm but supporting fcgid wrapper. I did following changes: wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1.0-6.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh ius-release*.rpm epel-release*.rpm yum install yum-plugin-replace yum remove mysql.i386 yum replace mysql --replace-with mysql55 service mysqld restart chkconfig mysqld on mysql_upgrade --password=1234 yum replace php --replace-with php53u yum install php53u-fpm php53u-pecl-apc service httpd restart chkconfig php-fpm on service php-fpm start I am not sure why virtualmin installing both mysql.i386 and 64 bit version together but needed to remove one of them for using yum replace. So i had php 5.3.6 + mysql 5.5.10 with PHP-FPM, APC installed. But virtualmin not supporting PHP-FPM + fastcgi and its still running on fcgid. I am ultra newbie on server management so i couldnt find workaround after this. I want to switch fcgid wrapper to PHP-FPM + fastcgi at least for 1 virtual server. And if i can find a fix for this section, i want to setup nginx 1.0 as front end reverse proxy for serving static files and passing php files to apache. http://nginxcp.com/ is what i want but its for cpanel.

  Read the article

• I cant get rid of apache2

  - by DaNieL

  It's obvious that I am a newbie with server amministration, my goal is to reach the knowledge needed to working with web services. I played with my debian server, and i messed up apache2; Now i want to completely* remove it from the server and then reinstall it as new. *for completely i really mean completely, logs, configurations, settings, everythings! I followed the steps suggested by freedom_is_chaos in this answer, and i guess apache2 is nomore installed, becose if i do apt-get remove apache2 i get this: Reading package lists... Done Building dependency tree Reading state information... Done Package apache2 is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. Then, i rebooted the server, and: # netstat -plant Active Internet connections (servers and established) [...] tcp6 0 0 :::80 :::* LISTEN 3467/apache2 [...] WTF? is apache2 still here? So seem: # /etc/init.d/apache2 stop Stopping web server: apache2. But: # update-rc.d remove apache2 update-rc.d: /etc/init.d/remove: file does not exist So, what is happening to my server? How can i completely and truly remove apache2 from my server?

  Read the article

• Creating a DNS Server

  - by c.adhityaa

  OK, I am a complete newbie to all this, so please bear with me. I want to create a DNS Server (like Google does - 8.8.8.8). I understand that a DNS Server is a Server that gives a IP on being given a hostname, ie. when I ask it what is the IP of google.com, it says "64.233.160.0". So, what I want to do is create a similar one that holds records of what translates to what. I thought of this since it looks to be similar to a webserver - ask for a page and it gives back the page. That is, when my machine has the IP xxx.xxx.xxx.xxx and people chose xxx.xxx.xxx.xxx as their Primary DNS Server, then when they ask "www.google.com", I sould be able to tell "64.233.160.0". So, how do I create this DNS Server that is accessible to everyone in the world ? It would be easier if we have something like EasyPHP which is the analogue to a webserver here. I am sorry if I have caused any trauma because this might seem rubbish to experts ;) Adhityaa

  Read the article

• Having trouble redirecting frevvo using mod_proxy

  - by user38859

  This question is similar to this: http://serverfault.com/questions/102868/how-to-access-webservers-running-on-ports-blocked-on-companys-network Basically, I'm using confluence and a plugin called frevvo. Confluence sits on port 8080 while frevvo sits on port 8082. I want to redirect both of them to port 80 via Apache HTTP web server so that it doesn't get blocked by company proxies. I've been using the document on Atlassian that shows me how to run confluence behind Apache (I can't post a second URL due to being a newbie here) I've successfully redirected Confluence from port 8080 to port 80 so I can now access Confluence using www.example.com/confluence. Now I tried doing the same thing to frevvo with the following configurations: Apache httpd: ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /confluence http://localhost:8080/confluence ProxyPassReverse /confluence http://localhost:8080/confluence <Location /confluence> Order allow,deny Allow from all </Location> ProxyPass /frevvo http://localhost:8082/ ProxyPassReverse /frevvo http://localhost:8082/ <Location /forms> Order allow,deny Allow from all </Location> And in server.xml for the frevvo Tomcat instance, I added the following within <Host> tag: <Context path=" " docBase="" debug="0" reloadable="false"> <!-- Logger is deprecated in Tomcat 5.5. Logging configuration for Confluence is specified in confluence/WEB-INF/classes/log4j.properties --> <Manager pathname="" /> </Context> The plugin, frevvo, when accessed through the browser using http://localhost:8082 usually redirect to http://localhost:8082/frevvo/web With the above configuration, when accessing www.example.com.au/frevvo redirects to www.example.com/frevvo/web/static/login - which doesn't work. I hope the above details is clear and appreciate anyone who could give us some insight.

  Read the article

• 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

  - by T.J. Crowder

  (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

  Read the article

• OpenVpn Iptables Error

  - by Mook

  I mean real newbie - linux here.. Please help me configuring my openvpn through iptables. My main goal here is to open port for regular browsing (80, 443), email (110, 25), etc just like isp does but i want to block p2p traffic. So I will need to open only few port. Here are my iptables config # Flush all current rules from iptables # iptables -F iptables -t nat -F iptables -t mangle -F # # Allow SSH connections on tcp port 22 (or whatever port you want to use) # iptables -A INPUT -p tcp --dport 22 -j ACCEPT # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP #using DROP for INPUT is not always recommended. Change to ACCEPT if you prefer. iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept packets belonging to established and related connections # iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # #Accept connections on 1194 for vpn access from clients #Take note that the rule says "UDP", and ensure that your OpenVPN server.conf says UDP too # iptables -A INPUT -p udp --dport 1194 -j ACCEPT # #Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT #10.8.0.0 ? Check your OpenVPN server.conf to be sure iptables -A FORWARD -j REJECT iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source 100.200.255.256 #Use your OpenVPN server's real external IP here # #Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 26 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -L -v But when I connect to my vpn, i can't browsing and also got RTO on pinging yahoo, etc

  Read the article

• Error In centos6 while compiling java classes,in tomcat6

  - by AJIT RANA

  I am newbie to Linux and Centos6. I bought server just now and want to deploy my web app in it. I am getting error while I am compiling my servlet classes. It showing me bash: javac: command not found when I try to compile my classes. But when I checked my class in '/usr/lib/jvm/java-1.6.0/bin .'I found my javac there. Then I checked javac with the help of command ./javac i got ERROR.. [root:ip_address.com]# ./javac There is insufficient memory for the Java Runtime Environment to continue. pthread_getattr_np Error occurred during initialization of VM java.lang.OutOfMemoryError: unable to create new native thread I followed the step as shown in "" Java outofmemoryerror when creating <100 threads "" which shows me command to get limits.. '[root:ipaddress.com]# ulimit -a core file size (blocks, -c) unlimited data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 278528 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited' [root:ipaddress.com]# top bash: top: command not found link :- http://stackoverflow.com/q/12913857/1746764

  Read the article

• Problems migrating software RAID 5 to new server (linux)

  - by leleu

  I have a CentOS setup with sw RAID5 that holds my data. Well, the server died, so I bought another box to migrate my drives to. Only thing is, I cannot get the RAID array rebuilt (not even sure it needs rebuilding, might just need the /dev/md0 mapping created... but I don't even know how to determine what I need!) Some details: RAID5 software (used mdadm) 4x 250GB drives (2 are SATA, 2 are EIDE -- would this matter? It worked fine in the other box...) latest CentOS distro built using mdadm I've got a decent amount of experience with standard linux stuff, but the hardware level stuff runs me in circles. I've spent some time googling and elsewhere here on SF, so please be kind for my newbie questions :). My question is this: how can I diagnose the problem? For all I know, I'm using the wrong device blocks when I try to rebuild the array, but I can't find the command to display only the devices that have some physical attachment. Is there some simple way for me to run mdadm, having it scan over all my physical drives, and say "hey, drives 2,5,6,7 are a software array, want me to mount it?" I basically just took the drives from my old box and put it into my new one. They show up in the BIOS. What steps do I need to take in order to get the array up, running, and mounted? Thanks in advance!

  Read the article

• Apache2 config problem

  - by Hellnar

  For using my Debian VPS for multiple domains , I did such actions: removed the default one from sites-enabled/ and sites-available/ (config and the symbolic link) and I added this under sites-available/www.mysite.com : <VirtualHost MYIP:80> ServerName mysite.com ServerAlias www.mysite.com Alias /media/ /home/myuser/mysite/media/ Alias /admin_media/ /home/myuser/django/Django-1.2/django/contrib/admin/media/ WSGIScriptAlias / /home/myuser/mysite/wsgi.py ErrorLog /home/myuser/mysite/logs/error.log CustomLog /home/myuser/mysite/logs/access.log combined </VirtualHost> And I have changed my ports.conf to: NameVirtualHost MYIP:80 Listen 80 <IfModule mod_ssl.c> # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here Listen 443 </IfModule> Lastly I enabled the new domain via the command: a2ensite www.mysite.com After restart I get this error: myuser:~# /etc/init.d/apache2 restart Restarting web server: apache2apache2: Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/sites-enabled/www.birertek.com: /etc/apache2/sites-enabled/www.birertek.com:1: <VirtualHost> was not closed. failed! Please help this poor soul.

  Read the article

• Using the RST3 plugin in the Leo Outliner

  - by T-Boy

  I'm currently trying out the Leo Outliner, and I've heard quite a bit about the RST3 plugin that it has. I'm not planning to use Leo to program just yet -- at this point I'm wondering if it might be useful for generating HTML and PDF documents, as I'm quite currently enamored with RST and how it works. I'm using my Ubuntu Netbook Remix netbook (running 9.10, I believe). I think I've got it down pat, more or less -- I've installed docutils using the Synaptics Package Manager, and I think I've gotten SilverCity installed, as per the requirements -- I've downloaded the archive, and then run "sudo python setup.py install" with no errors. The thing is, I'm not exactly sure how to invoke the rst3 plugin itself. It doesn't appear in the Plugins menu for Leo right now, and the documentation I've managed to source doesn't seem to clearly explain how to use the plugin. Has anyone had any experience in using the rst3 plugin in Leo? It's a little confusing right now, and searches on Google doesn't seem to be helping much any more. I'm using the latest 4.7.1 final version of Leo from the Synaptics Package Manager (was informed that this would have offered the best integration with UNR, so I figured, what the heck). Have I missed out on any steps here, and are there any useful tutorials on how to use the rst3 plugin?

  Read the article

• Kerberos & signle-sign-on for website

  - by Dylan Klomparens

  I have a website running on a Linux computer using Apache. I've employed mod_auth_kerb for single-sign-on Kerberos authentication against a Windows Active Directory server. In order for Kerberos to work correctly, I've created a service account in Active Directory called dummy. I've generated a keytab for the Linux web server using ktpass.exe on the Windows AD server using this command: ktpass /out C:\krb5.keytab /princ HTTP/[email protected] /mapuser [email protected] /crypto RC4-HMAC-NT /ptype KRB5_NT_PRINCIPAL /pass xxxxxxxxx I can successfully get a ticket from the Linux web server using this command: kinit -k -t /path/to/keytab HTTP/[email protected] ... and view the ticket with klist. I have also configured my web server with these Kerberos properties: <Directory /> AuthType Kerberos AuthName "Example.com Kerberos domain" KrbMethodK5Passwd Off KrbAuthRealms EXAMPLE.COM KrbServiceName HTTP/[email protected] Krb5KeyTab /path/to/keytab Require valid-user SSLRequireSSL <Files wsgi.py> Order deny,allow Allow from all </Files> </Directory> However, when I attempt to log in to the website (from another Desktop with username 'Jeff') my Kerberos credentials are not automatically accepted by the web server. It should grant me access immediately after that, but it does not. The only information I get from the mod_auth_kerb logs is: kerb_authenticate_user entered with user (NULL) and auth_type Kerberos However, more information is revealed when I change the mod_auth_kerb setting KrbMethodK5Passwd to On: [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1939): [client xxx.xxx.xxx.xxx] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1031): [client xxx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(735): [client xxx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(645): [client xxx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1110): [client xxx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=0 [email protected] authtype=Basic What am I missing? I've studied a lot of online tutorials and cannot find a reason why the Kerberos credentials are not allowing access.

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• ESXi Server with 12 physical cores maxed out with only 8 cores assigned in virtual machines

  - by Sam

  I have an ESXi 5 server running on a 2-processor, 12-core system with hyperthreading enabled. So: 12 physical cores, 24 logical ones. On this server are 4 Windows 7 VMs, each configured for 2 processors, each running VMware Tools. Looking at my stats in vSphere, my "core utilization" is constantly maxed out. Yes, these machines are working hard, but only 8 cores have been allocated. How is this possible? Should I look into reducing the processor count per machine as in this post: VMware ESX server? I checked to ensure that hardware virtualization is enabled in the BIOS of the machine (a DELL R410). I've also started reading up on configuration, but being a newbie there's a lot of material to catch up on. It also seems I should only bother with advanced settings and pools if I'm really pushing the load, and I don't think that I should be pushing it with so few VMs. I suspect that I have some basic, incorrect configuration setting, but it's also possible that I have some giant misconceptions about virtualization. Any pointers? EDIT: Given the responses I've gotten so far, it seems that this is a measurement problem and not a configuration problem, making this less critical. Perhaps the real question is: How does the core utilization of the server reach a higher percentage than all individual cores' core utilization, and given that this possibility makes the metric useless for overall server load, what is the best global metric for measuring CPU load on hyper-threaded systems?

  Read the article

• wget mirroring, subdomains and directories and cookies

  - by Jimmu

  Hi all, I have an account on a web page that is now "full" (ie I have used up all my allocated space) and I would like to make a mirror of that site. wget seems like the thing to use. The problem is that I would only like to mirror the sites the lie within this directory http://user.domain.com/room/2324343/transcript/ (and sub-directories). Whilst saving the correct stylesheets, javascripts and css etc which exist in different directories. There as also uploaded files that are linked to within the pages in the transcript directory (on different directories) that I would like to download/mirror (theses are in a variatey of formats .exe, .py, .png, .app (and many more)). There are also images that are on different severs that are on these pages. Also I would like it if the links (which are sometimes relative , sometimes absoulute (but to internal things), sometimes external ) worked correctly so that if they link to things that have been downloaded(mirrored) they work fine (without internet connection), but if they link to things that are external or havent been mirrored they link to the external site. Basically so they work as expected. Another problem is that you have to log in to acess the site. Can wget be used to acomplish this or is there a better way? either way how do I achive this? (I have asked this question at stackoverflow.com/questions/2190115/wget-mirroring-subdomains-and-directories-and-cookies but it was recommended that I try asking it here)

  Read the article

• Python easy_install confused on Mac OS X

  - by slf

  environment info: $ echo $PATH /opt/local/bin:/opt/local/sbin:/sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin:/opt/local/bin:/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:~/.utility_scripts $ which easy_install /usr/bin/easy_install specifically, let's try the simplejson module (I know it's the same thing as import json in 2.6, but that isn't the point) $ sudo easy_install simplejson Searching for simplejson Reading http://pypi.python.org/simple/simplejson/ Reading http://undefined.org/python/#simplejson Best match: simplejson 2.1.0 Downloading http://pypi.python.org/packages/source/s/simplejson/simplejson-2.1.0.tar.gz#md5=3ea565fd1216462162c6929b264cf365 Processing simplejson-2.1.0.tar.gz Running simplejson-2.1.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-Ojv_yS/simplejson-2.1.0/egg-dist-tmp-AypFWa The required version of setuptools (>=0.6c11) is not available, and can't be installed while this script is running. Please install a more recent version first, using 'easy_install -U setuptools'. (Currently using setuptools 0.6c9 (/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python)) error: Setup script exited with 2 ok, so I'll update setuptools... $ sudo easy_install -U setuptools Searching for setuptools Reading http://pypi.python.org/simple/setuptools/ Best match: setuptools 0.6c11 Processing setuptools-0.6c11-py2.6.egg setuptools 0.6c11 is already the active version in easy-install.pth Installing easy_install script to /usr/local/bin Installing easy_install-2.6 script to /usr/local/bin Using /Library/Python/2.6/site-packages/setuptools-0.6c11-py2.6.egg Processing dependencies for setuptools Finished processing dependencies for setuptools I'm not going to speculate, but this could have been caused by any number of environment changes like the Leopard - Snow Leopard upgrade, MacPorts or Fink updates, or multiple Google App Engine updates.

  Read the article

• Apache2, making my site publicly available

  - by Shackler

  Hello, I want to make my apache 2 development server public to the internet, it is a Django based website. Here is my apache2 config: <VirtualHost *:80> Alias /media /home/user/myproject/statics Alias /admin_media /home/myuser/django/Django-1.1.1/django/contrib/admin/media WSGIScriptAlias / /home/myuser/myproject/myproject_wsgi.py WSGIDaemonProcess myproject user=myuser group=myuser threads=25 WSGIProcessGroup myproject </VirtualHost> When I do netstat -lntup I get: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp6 0 0 :::80 :::* LISTEN - tcp6 0 0 :::22 :::* LISTEN - tcp6 0 0 ::1:631 :::* LISTEN - udp 0 0 0.0.0.0:5353 0.0.0.0:* - udp 0 0 0.0.0.0:38582 0.0.0.0:* I connect with ADSL thus I am behind a router. For this I have made my computer DMZ enabled to my machine. What can be the problem? When I try to login with my ip, I get my routers config page, when a friend tries to connect to me from internet, he gets "not authorized".

  Read the article

• SSH session closing whilst virtualenv session stays open (I think)

  - by ing0

  I've been developing some sites using Flask recently (running on debian within a virtualenv), and when I am testing I can run it on a port, let's say post 5000. So I run the script like so: . env/bin/activate <- go into virtual environment python file.py <- run python script And I will be given this message: Running on http://0.0.0.0:5000/ So this all works great and I can access my site on this port fine. However... my rubbish ISP always does this thing where it resets something around 1am every morning. I have no idea what this is, everything runs like normal but I always get disconnected from any SSH sessions open. This leaves it running and all I can do is call: lsof -i Which will show me the process but if I kill it and then rerun it things get weird. The: Running on http://0.0.0.0:5000 message still shows but I cannot connect to it anymore. I've tried changing the port number and it seems the only thing that works is trying again later on or on another day. Now I'm assuming that something on my server resets inbetween these times and I would like to think it was maybe that virtualenv session timing out, but I cannot find out how to do this manually, does anyone know?

  Read the article

• Passing OpenVPN road-warrior traffic through tunnel pfsense

  - by Chris

  I have a local LAN (10.100.100.0/24) and OpenVPN road-warriors (10.99.99.0/24). pfSense is regulating all this as follows: LAN: 10.100.100.105 WAN: 10.100.99.1 (connected to DSL Router which connects to internet). OPT1: 10.99.99.0 (OpenVPN tun0). There is an IPSec connection between my office and another office where my LAN can work on a specific IP address (sql server to be exact) on 192.168.30.41. My problem is that I wish my OpenVPN road-warrior clients to be able to use the IPSec service on 192.168.30.41 as well (which at present they cannot despite the fact that I am pushing the route 192.168.30.0 255.255.255.0). The other site's administrator cannot add the extra route for my openvpn clients for a lot of reasons which I am not going to enter at this stage. Is there a possibility that I could NAT all of my openVPN road-warriors requests through a local LAN IP address (something like 10.100.100.250 which is not used by anything on my LAN). The problem is that I am a newbie with pfSense so as much step-by-step help as possible would be very much appreciated! Thank you. C.

  Read the article

• Map a domain to another subdomain - Rackspace

  - by Gorgi Rankovski

  I am using a subdomain as a parameter to an ASP.NET MVC 4 application. It's working well. Now I need to test my approach, so I have the application hosted on appharbor. It works well with subdomains here too. Our DNS registers are on Rackspace, but I have no control over it. Another guy is responsible for that. So, myapp.apphb.com can be accessed through myapp.com. Also abc.myapp.com is working as expected. I use abc as a parameter. So, now I want abc.com to be mapped in those Rackspace DNS registers to abc.myapp.com Is this possible at all? Can you explain to us how to do that? Will I have some problems with it? Anything that I should be aware of? Please have in mind that I am newbie when it comes to DNS. And no experience with Rackspace. Thanks.

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Rebooting access point via SSH with pexpect... hangs. Any ideas?

  - by MiniQuark

  When I want to reboot my D-Link DWL-3200-AP access point from my bash shell, I connect to the AP using ssh and I just type reboot in the CLI interface. After about 30 seconds, the AP is rebooted: # ssh [email protected] [email protected]'s password: ******** Welcome to Wireless SSH Console!! ['help' or '?' to see commands] Wireless Driver Rev 4.0.0.167 D-Link Access Point wlan1 -> reboot Sound's great? Well unfortunately the ssh client process never exits, for some reason (maybe the AP kills the ssh server a bit too fast, I don't know). My ssh client process is completely blocked (even if I wait for several minutes, nothing happens). I always have to wait for the AP to reboot, then open another shell, find the ssh client process ID (using ps aux | grep ssh) then kill the ssh process using kill <pid>. That's quite annoying. So I decided to write a python script to reboot the AP. The script connects to the AP's CLI interface via ssh, using python-pexpect, and it tries to launch the "reboot" command. Here's what the script looks like: #!/usr/bin/python # usage: python reboot_ap.py {host} {user} {password} import pexpect import sys import time command = "ssh %(user)s@%(host)s"%{"user":sys.argv[2], "host":sys.argv[1]} session = pexpect.spawn(command, timeout=30) # start ssh process response = session.expect(r"password:") # wait for password prompt session.sendline(sys.argv[3]) # send password session.expect(" -> ") # wait for D-Link CLI prompt session.sendline("reboot") # send the reboot command time.sleep(60) # make sure the reboot has time to actually take place session.close(force=True) # kill the ssh process The script connects properly to the AP (I tried running some other commands than reboot, they work fine), it sends the reboot command, waits for one minute, then kills the ssh process. The problem is: this time, the AP never reboots! I have no idea why. Any solution, anyone?

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• multiple folder structures/views

  - by Sojourner

  Newbie. Setting up a server for a law firm. Want to set up the folder structure as follows: Client 1 Name -- Matter 1 (i.e. setting up corporation) -- Matter 2 (i.e. divorce) -- Matter 3 (i.e. setting up trust) Client 2 Name -- Matter 1 Client 3 Name -- Matter 1 and so on. But the attorneys prefer navigating a folder structure, more based on what case type: Civil -- Client 1 Name (i.e. Smythe) -- Client 2 Name (i.e. Jones) -- Client 3 Name (i.e. Johson) -- Landlord/Tenant -- Client 1 Name (i.e. Jones) -- Client 2 Name (i.e. Johson) -- Class Action Suits -- Suit 1 -- Suit 2 Personal Injury -- Client 1 Name -- Client 2 Name -- Client 3 Name Criminal -- Client 1 Name (i.e. Smythe) I'd like to know if it's possible to set up the server with the first folder structure (it's more organized and easier to employ scripts), while having the second folder structure available for users who find it easier to deal with the same types of cases grouped together.

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >