Search Results

Search found 8389 results on 336 pages for 'shared calendar'.

Page 158/336 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

  • Gnome Mplayer failed to open VDPAU backend libvdpau_nvidia.so

    - by Tim
    When I open an avi file under Gnome Mplayer, there is an error report: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I then followed this blog to solve this problem, which suggests two ways. The first way is to call mplayer in terminal: mplayer -vo xv video.wmv This works for me. But I would like to try the second way, which is to write options in one of the configure files of Gnome Mplayer. I choose to write into ~/.mplayer/config, where I wrote: -vo xv But it does not work. So I was wondering if I make any mistake? What to write into the configure file? Thanks and regards!

    Read the article

  • RAM Cache always full

    - by Tobias
    I have 6GB RAM, i5 2.4GHZ Processor running Ubuntu 11.10. When streaming online or opening several tabs in Chromium I soon have 4GB Memory in the cache. And this makes my Notebook slow. When streaming a video, after a few minutes it really slows down and stumbles/jerks. I partitioned my HD so that I have 8GB swap. What could the problem be? How can I solve this? P.s: initially I had 4gb and recently upgraded to 6GB, but I did not experience a significant change. P.P.S: if I enter "free -g" in the terminal this is the result: total used free shared buffers cached Mem: 5 2 3 0 0 0 -/+ buffers/cache: 1 4 Swap: 8 0 8

    Read the article

  • Prewritten App for Used Car Dealer?

    - by Shawn Eary
    Is there somewhere I can find a prewritten WebApp (with database) for a used car dealer? The application would need to support the following: Easy setup in a low cost Shared or Cloud Host Give potential customers easy way to browse current inventory (cars on lot) with suggested prices Give dealership easy way to login and update inventory (cars on lot) and suggested prices Give potential customers easy way to send the dealership an inquiry about a specific vehicle on the lot with CAPTCHA style SPAM protection I prefer ASP.NET MVC and Microsoft SQL Server, but I might consider other technologies such as WebForms and LightSwitch (HTML5). I am reasonably comfortable with MVC and WebForms, but I really don't want to waste a bunch of time writing an application that might already exist. I did find a few interesting templates via Bing that seem to control CSS and Layout, but I'm not sure if they contain any business logic or if they would integrate well into an MVC App.

    Read the article

  • ZeroBin Is an Encrypted PasteBin Alternative

    - by Jason Fitzpatrick
    ZeroBin is like the heavily armored sibling of PasteBin; You can still paste large chunks of text but that text is encrypted with client-side encryption. PasteBin is great when you need to share snippets of code or log files, the only problem is the service is essentially wide open. Not such a big deal if you’re sharing your XBMC logs on the support forum to get a little help figuring out why your movie list won’t update, but less than idea if you’re sharing more sensitive information. ZeroBin steps in to fill that gap by offering client-side encryption where ZeroBin has no knowledge of the content of your shared text snippets. In addition you can set up the ZeroBin content to self destruct after a set amount of time. Hit up the link below to take ZeroBin for a spin. ZeroBin [via One Thing Well] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

    Read the article

  • How to price code reviews to encourage good behavior?

    - by Chris Clark
    I work for a company that has a hosted .net internet application with many clients. Those clients often want to write customizations for our application. We have APIs to hook into the app, but the customizations themselves are written in .net. This is a shared, secure hosting environment and we have to code review these customizations before we can deploy them in our datacenter to ensure that they don't degrade performance, crash our servers, or open any security vulnerabilities. We charge for these code reviews. The current pricing model is simply a function of the number of lines of code. I think this is a bad idea for a variety of reasons, but primarily because, if we are interested in verifying that the code works as expected, we should be incentivizing good, readable code, not compaction. I would like to propose a pricing model that incorporates some, or all of the following as inputs: Lines of code Cyclomatic complexity Avg function length # of functions Are there any other metrics I should incorporate, or other ideas for how we can reasonably create pricing for code reviews that encourages safe and understandable code?

    Read the article

  • Webpage redirection time

    - by Abhijeet Ashok Muneshwar
    I want to calculate time consumed in redirecting from 1 webpage to another webpage. For Example: 1) I am using Facebook in Google Chrome browser. I have shared 1 link on my Facebook profile like below: http://www.webdeveloper.com/ (It's not only Facebook. It can be any domain having link to another domain). 2) When I click on this link from my Facebook profile, then this website will open in new tab. 3) I want to calculate time difference in miliseconds or microseconds between below two events: First Event: Time of clicking link "http://www.webdeveloper.com/" from my Facebook profile. Second Event: Time of completely loading webpage of "http://www.webdeveloper.com/". Thank you in advance.

    Read the article

  • Webpage redirection time

    - by Abhijeet Ashok Muneshwar
    I want to calculate time consumed in redirecting from 1 webpage to another webpage. For Example: 1) I am using Facebook in Google Chrome browser. I have shared 1 link on my Facebook profile like below: http://www.webdeveloper.com/ (It's not only Facebook. It can be any domain having link to another domain). 2) When I click on this link from my Facebook profile, then this website will open in new tab. 3) I want to calculate time difference in miliseconds or microseconds between below two events: First Event: Time of clicking link "http://www.webdeveloper.com/" from my Facebook profile. Second Event: Time of completely loading webpage of "http://www.webdeveloper.com/". Thank you in advance.

    Read the article

  • How to Never Use iTunes With Your iPhone, iPad, or iPod Touch

    - by Chris Hoffman
    iTunes isn’t an amazing program on Windows. There was a time when Apple device users had to plug their devices into their PCs or Macs and use iTunes for device activation, updates, and syncing, but iTunes is no longer necessary. Apple still allows you to use iTunes for these things, but you don’t have to. Your iOS device can function independently from iTunes, so you should never be forced to plug it into a PC or Mac. Device Activation When the iPad first came out, it was touted as a device that could replace full PCs and Macs for people who only needed to perform light computing tasks. Yet, to set up a new iPad, users had to plug it into a PC or Mac running iTunes and use iTunes to activate the device. This is no longer necessary. With new iPads, iPhones, and iPod Touches, you can simply go through the setup process after turning on your new device without ever having to plug it into iTunes. Just connect to a Wi-Fi or cellular data network and log in with your Apple ID when prompted. You’ll still see an option that allows you to activate the device via iTunes, but this should only be necessary if you don’t have a wireless Internet connection available for your device. Operating System Updates You no longer have to use Apple’s iTunes software to update to a new version of Apple’s iOS operating system, either. Just open the Settings app on your device, select the General category, and tap Software Update. You’ll be able to update right from your device without ever opening iTunes. Purchased iTunes Media Apple allows you to easily access content you’ve purchased from the iTunes Store on any device. You don’t have to connect your device to your computer and sync via iTunes. For example, you can purchase a movie from the iTunes Store. Then, without any syncing, you can open the iTunes Store app on any of your iOS devices, tap the Purchased section, and see stuff you’ve downloaded. You can download the content right from the store to your device. This also works for apps — apps you purchase from the App Store can be accessed in the Purchased section on the App Store on your device later. You don’t have to sync apps from iTunes to your device, although iTunes still allows you to. You can even set up automatic downloads from the iTunes & App Store settings screen. This would allow you to purchase content on one device and have it automatically download to your other devices without any hassle. Music Apple allows you to re-download purchased music from the iTunes Store in the same way. However, there’s a good chance you have your own music you didn’t purchase from iTunes. Maybe you spent time ripping it all from your old CDs and you’ve been syncing it to your devices via iTunes ever since. Apple’s solution for this is named iTunes Match. This feature isn’t free, but it’s not a bad deal at all. For $25 per year, Apple allows you to upload all your music to your iCloud account. You can then access all your music from any iPhone, IPad, or iPod Touch. You can stream all your music — perfect if you have a huge library and little storage on your device — and choose which songs you want to download to your device for offline use. When you add additional music to your computer, iTunes will notice it and upload it using iTunes Match, making it available for streaming and downloading directly from your iOS devices without any syncing. This feature is named iTunes Match because it doesn’t just upload music — if Apple already has a song you upload, it will “match” your song with Apple’s copy. This means you may get higher-quality versions of your songs if you ripped them from CD at a lower bitrate. Podcasts You don’t have to use iTunes to subscribe to podcasts and sync them to your devices. Even if you have a lowly iPod Touch, you can install APple’s Podcasts app from the app store. Use it to subscribe to podcasts and configure them to automatically download directly to your device. You can use other podcast apps for this, too. Backups You can continue backing up your device’s data through iTunes, generating local backups that are stored on your computer. However, new iOS devices are configured to automatically back up their data to iCloud. This happens automatically in the background without you even having to think about it, and you can restore such backups when setting up a device simply by logging in with your Apple ID. Personal Data In the days of PalmPilots, people would use desktop programs like iTunes to sync their email, contacts, and calendar events with their mobile devices. You probably shouldn’t have to sync this data form your computer. Just sign into your email account — for example, a Gmail account — on your device and iOS will automatically pull your email, contacts, and calendar events from your associated account. Photos Rather than connecting your iOS device to your computer and syncing photos from it, you can use an app that automatically uploads your photos to a web service. Dropbox, Google+, and even Flickr all have this feature in their apps. You’ll be able to access your photos from any computer and have a backup copy without any syncing required. You may still need to use iTunes if you want to sync local music without paying for iTunes Match or copy local video files to your device. Copying large local files over is the only real scenario where you’d need iTunes. If you don’t need to copy such files over, you can go ahead and uninstall iTunes from your Windows PC if you like. You shouldn’t need it.     

    Read the article

  • Hold The Date: GlassFish Community Event and Party @ JavaOne 2012 - Sep 30

    - by arungupta
    A yearly tradition for the past 5 years (2007, 2008, 2009, 2010, 2011) is back again this year ... GlassFish Community Event is a gathering of GlassFish community members attending JavaOne. GlassFish Party is for everybody who are, or would like to be friends of GlassFish, in and around the San Francisco Bay Area. This year, again, both the events will be happening on the Sunday of JavaOne. The exact coordinates are a TBD but save the date while you are booking flights/hotels. GlassFish Community Event When: Sep 30, 11am - 1pm Where: TBD GlassFish Party When: Sep 30, 8pm - 10pm Where: The Thirsty Bear Note, a separate JavaOne registration is required to attend the community event. The party is open to everybody, and no JavaOne registration is required. RSVP details are still being worked upon and will be shared soon. 10 reasons to attend these events allows you to build your case with the management :-)

    Read the article

  • Thoughts about MVC

    - by ayyash
    so i figured this one out, as a newcomer to the web development scene from the telecom biz, where we dealt with low level hardware API's, and a C++ fanboy, i tend to be bothered by automagical code, yes i appreciate the effort that went into it, and i certainly appreciate the luxury it provides to get more things done, but i just don't get it. so i decided to change that, and start investigating the new MVC based web apps, and at first it was like hitting a brick wall, i knew MVC from MFC days, so i'm familiar with the pattern, but i just couldn't get my head around the web version of it, till i came to realize the routing, is actually a separate feature to be inspected, much like understanding how LINQ works by better understanding anonymous objects. and so this article serve as an introduction to the following blogs where i share my views of how asp.net routing works, and then leverage that to the MVC level, and play around that field for a bit. as with most of my shared knowladge that may seem trivial to some, but i guess a newcomer's point of view can be useful for some folks out there.

    Read the article

  • ubuntu is very slow

    - by johnny smithens
    Hello all. I am new with Ubuntu, and it is very slow(even in Ubuntu 2D). The performance is degraded for almost any task. I just reinstalled with amd64, and tried updating the Nvidia drivers with Nvidia Xserver. but it made no difference. This is the output of free -m: total used free shared buffers cached Mem: 3006 1318 1688 0 61 699 -/+ buffers/cache: 556 2449 Swap: 3064 0 3064 tl;dr - total: 3006, used: 1318 When I see the virtual console with Ctrl+Alt+F2, I see constantly: Assuming Drive Cache: write through; asking for cache data failed; It is very frustrating. Thanks in advance!

    Read the article

  • How to write good code with new stuff?

    - by Reza M.
    I always try to write easily readable code that is well structured. I face a particular problem when I am messing around with something new. I keep changing the code, structure and so many other things. In the end, I look at the code and am annoyed at how complicated it became when I was trying to do something so simple. Once I've completed something, I refactor it heavily so that it's cleaner. This occurs after completion most of the time and it is annoying because the bigger the code the more annoying it is the rewrite it. I am curious to know how people deal with such agony, especially on big projects shared between many people ?

    Read the article

  • How to share internet connection and making the client accessible over the lan

    - by Dario Silva Moran
    I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

    Read the article

  • "/etc/apache2/mods-enabled/proxy_html.load: Cannot load /usr/lib/libxml2.so.2 into server" error with Apache mod-proxy

    - by hhh
    The command $ sudo apt-get install libapache2-mod-proxy-html and then $sudo service apache2 restart fires: apache2: Syntax error on line 210 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/proxy_html.load: Cannot load /usr/lib/libxml2.so.2 into server: /usr/lib/libxml2.so.2: cannot open shared object file: No such file or directory Action 'configtest' failed. I am using X220 laptop. Perhaps related thing but ?AMD here. Perhaps some repeating bug in Ubuntu, again. How to fix this? Any patch yet for Ubuntu?

    Read the article

  • Using a SMTP Service for email

    - by Josh S.
    This may be a horribly obvious question, but I'm learning and just need someone to confirm it for me. I putting together a private social network that needs to email their members (through the social network software, Elgg) regularly. I'm hosting it on a shared HostGator plan (because they won't receive much traffic) and they'll email 10-1000 emails a few times a week. HostGator restricts you to 500 per hour. I'm also worried about deliverability. I've been searching up and down about how to throttle the emails so it will all send reliably... but then I came across the idea of an outside SMTP relay service. Would using an SMTP service resolve this issue? If so, any opinions on quality SMTP services?

    Read the article

  • Check/Monitor Amount of SQL Queries per Hour

    - by deathlock
    My website is hosted on a shared hosting and I'd like to know how much SQL queries it is using per hour. I tried to navigate through cPanel and I find nothing to check or monitor the amount of SQL queries per hour. I tried to ask my host and they said it is not possible to do manually. However I found this http://forum.powweb.com/archive/index.php/t-49937.html and another one on Stackoverflow: http://stackoverflow.com/questions/9842094/sql-how-can-i-get-the-number-of-executed-queries-per-database-or-hour-or And since this exists, I assume that it is actually possible. Problem is I can't execute that in my phpmyAdmin. Can someone here guide me through the process?

    Read the article

  • IE9 - HTML5, Hardware Accelerated: First IE9 Platform Preview Available for Developers

    At the MIX conference, we demonstrated how the standard web patterns that developers already know and use broadly run better by taking advantage of PC hardware through IE9 on Windows. First, we showed IE9s new script engine, internally known as Chakra We shared the data and framework that informed our approach, and demonstrated better support for several standards: HTML5, DOM, and CSS3. We showed hardware-accelerated SVG support in IE9. Finally, we announced the availability of...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Extending Database-as-a-Service to Provision Databases with Application Data

    - by Nilesh A
    Oracle Enterprise Manager 12c Database as a Service (DBaaS) empowers Self Service/SSA Users to rapidly spawn databases on demand in cloud. The configuration and structure of provisioned databases depends on respective service template selected by Self Service user while requesting for database. In EM12c, the DBaaS Self Service/SSA Administrator has the option of hosting various service templates in service catalog and based on underlying DBCA templates.Many times provisioned databases require production scale data either for UAT, testing or development purpose and managing DBCA templates with data can be unwieldy. So, we need to populate the database using post deployment script option and without any additional work for the SSA Users. The SSA Administrator can automate this task in few easy steps. For details on how to setup DBaaS Self Service Portal refer to the DBaaS CookbookIn this article, I will list steps required to enable EM 12c DBaaS to provision databases with application data in two distinct ways using: 1) Data pump 2) Transportable tablespaces (TTS). The steps listed below are just examples of how to extend EM 12c DBaaS and you can even have your own method plugged in part of post deployment script option. Using Data Pump to populate databases These are the steps to be followed to implement extending DBaaS using Data Pump methodolgy: Production DBA should run data pump export on the production database and make the dump file available to all the servers participating in the database zone [sample shown in Fig.1] -- Full exportexpdp FULL=y DUMPFILE=data_pump_dir:dpfull1%U.dmp, data_pump_dir:dpfull2%U.dmp PARALLEL=4 LOGFILE=data_pump_dir:dpexpfull.log JOB_NAME=dpexpfull Figure-1:  Full export of database using data pump Create a post deployment SQL script [sample shown in Fig. 2] and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned Normal 0 -- Full importdeclare    h1   NUMBER;begin-- Creating the directory object where source database dump is backed up.    execute immediate 'create directory DEST_LOC as''/scratch/nagrawal/OracleHomes/oradata/INITCHNG/datafile''';-- Running import    h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', job_name => 'DB_IMPORT10');    dbms_datapump.set_parallel(handle => h1, degree => 1);    dbms_datapump.add_file(handle => h1, filename => 'IMP_GRIDDB_FULL.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);    dbms_datapump.add_file(handle => h1, filename => 'EXP_GRIDDB_FULL_%U.DMP', directory => 'DEST_LOC', filetype => 1);    dbms_datapump.start_job(handle => h1);    dbms_datapump.detach(handle => h1);end;/ Figure-2: Importing using data pump pl/sql procedures Using DBCA, create a template for the production database – include all the init.ora parameters, tablespaces, datafiles & their sizes SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In “Additional Configuration Options” step of Customize “Create Database Deployment Procedure” flow, provide the name of the SQL script in the Custom Script section and lock the input (shown in Fig. 3). Continue saving the deployment procedure. Figure-3: Using Custom script option for calling Import SQL Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also  populate the data using the post deployment step. Using Transportable tablespaces to populate databases Copy of all user/application tablespaces will enable this method of populating databases. These are the required steps to extend DBaaS using transportable tablespaces: Production DBA needs to create a backup of tablespaces. Datafiles may need conversion [such as from Big Endian to Little Endian or vice versa] based on the platform of production and destination where DBaaS created the test database. Here is sample backup script shows how to find out if any conversion is required, describes the steps required to convert datafiles and backup tablespace. SSA Administrator should copy the database (tablespaces) backup datafiles and export dumps to the backup location accessible from the hosts participating in the database zone(s). Create a post deployment SQL script and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned. Here is sample post deployment SQL script using transportable tablespaces. Using DBCA, create a template for the production database – all the init.ora parameters should be included. NOTE: DO NOT choose to bring tablespace data into this template as they will be created SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In the “Additional Configuration Options” step of the flow, provide the name of the SQL script in the Custom Script section and lock the input. Continue saving the deployment procedure. Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also populate the data using the post deployment step. More Information: Database-as-a-Service on Exadata Cloud Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Mod_rewrite and urls that don't end with .php

    - by Kevin Laity
    I'm trying to use Mod_rewrite to hide the .php extensions of my pages. However, it refuses to do any rewriting unless the input url ends with .php, which makes that impossible. I can confirm that rewriting works fine as long as the url has .php at the end. RewriteRule a\.php b\.php Works, while RewriteRule a\.html b\.html does not. How can I turn off this behavior and allow it to rewrite all urls? I'm on a shared host so whatever I do has to be done from a .htaccess file. Update: There seems to be some confusion about what I'm asking here. The question is not about how to write the rule, the question is about server configuration. The rule I'm using is fine, I can test that locally. But the server I'm working with is somehow configured so that mod_rewrite doesn't attempt to rewrite anything that doesn't end with .php

    Read the article

  • library put in /usr/local/lib is not loaded

    - by IARI
    Let me state in advance: One might think this question would is for server fault, but I think is is Ubuntu (config) specific. In short: I have put libwkhtmltox.so in /usr/local/lib as stated in installation instructions linked below, but it appears the library is not loaded. I am trying to install php-wkhtmltox, a php extension for wkhtmltox on my local desktop (Ubuntu 12.04). I have extracted the source and changed to the corresponding directory. After running phpize, ./configure fails at checking for libwkhtmltox support... yes, shared not found configure: error: Please install libwkhtmltox I suspect the reason the library is not loaded is that the path is not checked!? how do I proceed? Here are instructions I followed: http://davidbomba.com/index.php/2011/08/04/php-wkhtmltox/ http://roundhere.net/journal/install-wkhtmltopdf-php-bindings/

    Read the article

  • Infrastructure and Platform As A Service in Private Cloud at Lawrence Livermore National Laboratory

    - by Anand Akela
    Scientists at the National Ignition Facility (NIF)— the world’s largest laser, at the Lawrence Livermore National Laboratory (LLNL)— need research environment that requires re-creating the physical environment and conditions that exist inside the sun. They have built private cloud infrastructure using Oracle VM and Oracle Enterprise Manager 12c to provision such an environment for research.  Tim Frazier of LLNL joined the "Managing Your Private Cloud With Oracle Enterprise Manager' session at Oracle Open World 2012 and discussed how the latest features in Oracle VM and Oracle Enterprise Manager 12c enables them to accelerate application provisioning in their private cloud. He also talked about how to increase service delivery agility, improve standardized roll outs, and do proactive management to gain total control of the private cloud environment. He also presented at the "Scene and Be Heard Theater" at Oracle OpenWorld 2012 and shared a lot of good information about his project and what they are doing in their private cloud environment. Learn more by looking at Tim's presentation .

    Read the article

  • What You Said: Your Favorite Windows Customization Tricks

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your favorite Windows customization tricks and now we’re back to highlight some of the tips, tricks, and tweaks you shared. Your customization tips ranged from cosmetic to behind the scenes tweaks and offered a wide variety of ways to customize the Windows experience. Ted Lilley’s favorite must-have tweak involves Windows Explorer: The most fundamental change I make to Windows 7 is to immediately add tabs to Explorer via the QTTabbar add-on. I also add the good old cut/copy/paste/delete/new folder buttons alongside the tabs by installing Classic Shell (I skip Classic Start). Robin sets up virtual desktops: How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • Is your IP address neighborhood important for SEO?

    - by Evgeny
    Can other websites on your shared host affect the rank of your website in the Google index? (same IP address as yours, potentially malicious/low-trust content) Can other websites on your IP class affect the rank of your website in the Google index? (different actual IP, malicious/low-trust content) Clarification: Domain class, is what you get when you run a whois query on an IP address. Example: NetRange: 69.163.128.0 - 69.163.255.255 CIDR: 69.163.128.0/17 PS: Prefer answers with experience or links to trustworthy material, over speculations, assumptions and gut feelings.

    Read the article

  • How to structure a project that supports multiple versions of a service?

    - by Nick Canzoneri
    I'm hoping for some tips on creating a project (ASP.NET MVC, but I guess it doesn't really matter) against multiples versions of a service (in this case, actually multiple sets of WCF services). Right now, the web app uses only some of the services, but the eventual goal would be to use the features of all of the services. The code used to implement a service feature would likely be very similar between versions in most cases (but, of course, everything varies). So, how would you structure a project like this? Separate source control branches for each different version? Kind of shying away from this because I don't feel like branch merging should be something that we're going to be doing really often. Different project/solution files in the same branch? Could link the same shared projects easily Build some type of abstraction layer on top of the services, so that no matter what service is being used, it is the same to the web application?

    Read the article

  • Wine installation on 12.04 LTS

    - by Dale
    Installed wine from the Software Center and kept getting errors when trying to load windows programs. Uninstalled and did the apt-get installation of the latest version (1.5.7) Ran Wine configuration and get a "Failed to connect to the mount manager, the drive configuration cannot be edited" If i try to install a program it immediately goes to "Internal error" Any Ideas or possible solutions would be appreciated. Thanks Dale Ran winecfg and got the following: getting server_pid from lock 2457 wine: cannot get pid from lock (lock isn't locked) err:process:start_wineboot failed to start wineboot, err 1359 p11-kit: couldn't load module: /usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so: /usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so: cannot open shared object file: No such file or directory getting server_pid from lock 2457 wine: cannot get pid from lock (lock isn't locked) err:winecfg:WinMain failed to restart 64-bit L"C:\windows\system32\winecfg.exe", err 1359 getting server_pid from lock 2457 wine: cannot get pid from lock (lock isn't locked)

    Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >