Search Results

Search found 4246 results on 170 pages for 'socks proxy'.

Page 158/170 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• Squid on windows loadbalancing only to one server

  - by Martin L.

  After thousands of googles and trying days i cant get the load balancer/failover in squid on windows to work. Iam using squid 2.7. My webservers are 2 single NIC lighttpd and one dual nic lighttpd. server1 in this example is running squid on port 80 and lighttpd on port 8080 (just to test) Requirements: All 3 webservers running lighttpd should be balanced two option for load balancing: Best would be if server1 is busy server2 takes over, if server2 is busy server3 takes over, etc.. Round robin style evenly distributed load. Eg server1 takes first call, server2 second etc.. All requests should be treated the same way (no url rewriting or so on) Sent host headers have to be redirected to every server as http host header, speaking of "server1", "server1.company.internal" and "10.211.1.1". My approach: acl all src all acl manager proto cache_object http_port 80 accel defaultsite=server1.company.internal vhost #reverse proxy entries cache_peer 10.211.2.1 parent 8080 0 no-query originserver round-robin login=PASS name=server1_nic1 cache_peer 10.211.1.2 parent 80 0 no-query originserver round-robin login=PASS name=server2_nic1 cache_peer 10.211.2.3 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic1 cache_peer 10.211.2.4 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic2 #decl of names of squid host acl registered_name_hostdomain dstdomain server1.company.internal acl registered_name_host dstdomain server1 #ip of squid host acl registered_name_ip dstdomain 10.211.2.1 # access: redirects the correct squid hostname http_access allow registered_name_hostdomain http_access allow registered_name_host http_access allow registered_name_ip http_access deny all cache_peer_access server1_nic1 allow registered_name_hostdomain cache_peer_access server1_nic1 allow registered_name_host cache_peer_access server1_nic1 allow registered_name_ip cache_peer_access server2_nic1 allow registered_name_hostdomain cache_peer_access server2_nic1 allow registered_name_host cache_peer_access server2_nic1 allow registered_name_ip cache_peer_access server3_nic1 allow registered_name_hostdomain cache_peer_access server3_nic1 allow registered_name_host cache_peer_access server3_nic1 allow registered_name_ip cache_peer_access server3_nic2 allow registered_name_hostdomain cache_peer_access server3_nic2 allow registered_name_host cache_peer_access server3_nic2 allow registered_name_ip cache_peer_access server1_nic1 deny all cache_peer_access server2_nic1 deny all cache_peer_access server3_nic1 deny all cache_peer_access server3_nic2 deny all never_direct allow all Problems: Load balancer does not load balance other than to first server. Only if the first server is killed in any way the second will take over. I have seen the others working at some point, but definitely not as the intended load balancing described above. If the cache_peer_access is not defined sometimes the wrong hostname is sent to the backend webserver and this always depends on the defaultsite= parameter. Probably because the host header on the request to squid is not set and its replaced by defaultsite. Leaving out defaultsite didnt solve the problem. The only workaround i found for this is the current approach with cache_peer_access. Questions: Does the cache_peer_access influence the round-robin? Is there a better workaround to pass the host header to the backed webservers? Which parameters do increase the speed of load balancing or does anyone have a better approach? -Martin

  Read the article

• Will spreading your servers load not just consume more recourses

  - by Saif Bechan

  I am running a heavy real-time updating website. The amount of recourses needed per user are quite high, ill give you an example. Setup Every visit The application is php/mysql so on every visit static and dynamic content is loaded. Recourses: apache,php,mysql Every second (no more than a second will just be too long) The website needs to be updated real-time so every second there is an ajax call thats updates the website. Recourses: jQuery,apache,php,mysql Avarage spending for single user (spending one minute and visited 3 pages) Apache: +/- 63 requests / responsess serving static and dynamic content (img,css,js,html) php: +/- 63 requests / responses mysql: +/- 63 requests / responses jquery: +/- 60 requests / responses Optimization I want to optimize this process, but I think that maybe it would be just the same in the end. Before implementing and testing (which will take weeks) I wanted to have some second opinions from you guys. Every visit I want to start off with having nginx in the front and work as a proxy to deliver the static content. Recources: Dynamic: apache,php,mysql Static: nginx This will spread the load on apache a lot. Every Second For the script that loads every second I want to set up Node.js server side javascript with nginx in te front. I want to set it up that jquery makes a request ones a minute, and node.js streams the data to the client every second. Recources: jQuery,nginx,node.js,mysql Avarage spending for single user (spending one minute and visited 3 pages) Nginx: 4 requests / responsess serving mostly static conetent(img,css,js) Apache: 3 requests only the pages php: 3 requests only the pages node.js: 1 request / 60 responses jquery: 1 request / 60 responses mysql: 63 requests / responses Optimization As you can see in the optimisation the load from Apache and PHP are lifted and places on nginx and node.js. These are known for there light footprint and good performance. But I am having my doubts, because there are still 2 programs extra loaded in the memory and they consume cpu. So it it better to have less programs that do the job, or more. Before I am going to spend a lot of time setting this up I would like to know if it will be worth the while.

  Read the article

• Htaccess strange behaviour with Nginx

  - by Termos

  I have a site running on Nginx (v1.0.14) serving as reverse proxy which proxies requests to Apache (v2.2.19). So Nginx runs on port 80, Apache is on 8080. Overall site works fine except that i cannot block access to certain directories with .htaccess file. For example i have 'my-protected-directory' on 'www.site.com' Inside it i have htaccess with following code: <Files *> order deny,allow deny from all allow from 1.2.3.4 <--- my ip address here </Files> When i try to access this page with my ip (1.2.3.4) i get 404 error which is not what i expect: http://www.site.com/my-protected-directory However everything works as expected when this page is served directly by Apache. I can see this page, everyone else can't. http://www.site.com:8080/my-protected-directory Update. Nginx config (7.1.3.7 is site ip.): user apache; worker_processes 4; error_log logs/error.log; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; keepalive_timeout 65; gzip on; gzip_min_length 1024; gzip_http_version 1.1; gzip_proxied any; gzip_comp_level 5; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon; server { listen 80; server_name www.site.com site.com 7.1.3.7; access_log logs/host.access.log main; # serve static files location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/www.site.com/httpdocs; proxy_set_header Range ""; expires 30d; } # pass requests for dynamic content to Apache location / { proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Range ""; proxy_pass http://7.1.3.7:8080; } } Could please anyone tell me what is wrong and how this can be fixed ?

  Read the article

• Email client wont connect to SMTP Authentication server

  - by Jason

  Im having trouble installing SMTH Auth for my ubuntu email server. I have followed ubuntu own guide for SMTH AUT (https://help.ubuntu.com/14.04/serverguide/postfix.html). But my email client thunderbird is giving this error " lost connection to SMTP-client 127.0.0.1." I cant add new users to thundbird either because of this connection problem. Do i have to alter any setting on my Thunderbird perhaps since ? I did try to make thunderbird use SSL for imap as well but that neither works. I restarted postfix and dovecot to find errors but both run just fine. Prior to SMTP auth changes thunderbird could connect just fine to my server and send mails. This is my main.cf file in postfix. It looks just like the one on ubuntu guide above. readme_directory = no # TLS parameters #smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = mail.mysite.com mydomain = mysite.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = $mydomain mydestination = mysite.com #relayhost = smtp.192.168.10.1.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.10.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir/ mailbox_command = #SMTP AUTH smtpd_sasl_type = dovecot smtpd_recipient_restrictions=permit_mynetworks, permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_auth_only = no smtp_tls_security_level = may smtpd_tls_security_level = may smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes This my dovecot configuration at 10-master.conf service imap-login { inet_listener imap { #port = 143 } inet_listener imaps { #port = 993 #ssl = yes } # Number of connections to handle before starting a new process. Typically # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 # is faster. <doc/wiki/LoginProcess.txt> #service_count = 1 # Number of processes to always keep waiting for more connections. #process_min_avail = 0 # If you set service_count=0, you probably need to grow this. #vsz_limit = $default_vsz_limit } service pop3-login { inet_listener pop3 { #port = 110 } inet_listener pop3s { #port = 995 #ssl = yes } } service lmtp { unix_listener lmtp { #mode = 0666 } # Create inet listener only if you can't use the above UNIX socket #inet_listener lmtp { # Avoid making LMTP visible for the entire internet #address = #port = #} } service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = $default_vsz_limit # Max. number of IMAP processes (connections) #process_limit = 1024 } service pop3 { # Max. number of POP3 processes (connections) #process_limit = 1024 } service auth { unix_listener auth-userdb { #mode = 0600 #user = #group = } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } service dict { # If dict proxy is used, mail processes should have access to its socket. # For example: mode=0660, group=vmail and global mail_access_groups=vmail unix_listener dict { #mode = 0600 #user = #group = } } I did add auth_mechanisms = plain login to 10-auth.conf as well.

  Read the article

• Two-Hop SSH connection with two separate public keys

  - by yigit

  We have the following ssh hop setup: localhost -> hub -> server hubuser@hub accepts the public key for localuser@localhost. serveruser@server accepts the public key for hubuser@hub. So we are issuing ssh -t hubuser@hub ssh serveruser@server for connecting to server. The problem with this setup is we can not scp directly to the server. I tried creating .ssh/config file like this: Host server user serveruser port 22 hostname server ProxyCommand ssh -q hubuser@hub 'nc %h %p' But I am not able to connect (yigit is localuser): $ ssh serveruser@server -v OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Reading configuration data /home/yigit/.ssh/config debug1: /home/yigit/.ssh/config line 19: Applying options for server debug1: Reading configuration data /etc/ssh/ssh_config debug1: Executing proxy command: exec ssh -q hubuser@hub 'nc server 22' debug1: permanently_drop_suid: 1000 debug1: identity file /home/yigit/.ssh/id_rsa type 1000 debug1: identity file /home/yigit/.ssh/id_rsa-cert type -1 debug1: identity file /home/yigit/.ssh/id_dsa type -1 debug1: identity file /home/yigit/.ssh/id_dsa-cert type -1 debug1: identity file /home/yigit/.ssh/id_ecdsa type -1 debug1: identity file /home/yigit/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA cb:ee:1f:78:82:1e:b4:39:c6:67:6f:4d:b4:01:f2:9f debug1: Host 'server' is known and matches the ECDSA host key. debug1: Found key in /home/yigit/.ssh/known_hosts:33 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/yigit/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/yigit/.ssh/id_dsa debug1: Trying private key: /home/yigit/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). Notice that it is trying to use the public key localuser@localhost for authenticating on server and fails since it is not the right one. Is it possible to modify the ProxyCommand so that the key for hubuser@hub is used for authenticating on server?

  Read the article

• Apache's htcacheclean doesn't scale: How to tame a huge Apache disk_cache?

  - by flight

  We have an Apache setup with a huge disk_cache (500.000 entries, 50 GB disk space used). The cache grows by 16 GB every day. My problem is that the cache seems to be growing nearly as fast as it's possible to remove files and directories from the cache filesystem! The cache partition is an ext3 filesystem (100GB, "-t news") on an iSCSI storage. The Apache server (which acts as a caching proxy) is a VM. The disk_cache is configured with CacheDirLevels=2 and CacheDirLength=1, and includes variants. A typical file path is "/htcache/B/x/i_iGfmmHhxJRheg8NHcQ.header.vary/A/W/oGX3MAV3q0bWl30YmA_A.header". When I try to call htcacheclean to tame the cache (non-daemon mode, "htcacheclean-t -p/htcache -l15G"), IOwait is going through the roof for several hours. Without any visible action. Only after hours, htcacheclean starts to delete files from the cache partition, which takes a couple more hours. (A similar problem was brought up in the Apache mailing list in 2009, without a solution: http://www.mail-archive.com/[email protected]/msg42683.html) The high IOwait leads to problems with the stability of the web server (the bridge to the Tomcat backend server sometimes stalls). I came up with my own prune script, which removes files and directories from random subdirectories of the cache. Only to find that the deletion rate of the script is just slightly higher than the cache growth rate. The script takes ~10 seconds to read the a subdirectory (e.g. /htcache/B/x) and frees some 5 MB of disk space. In this 10 seconds, the cache has grown by another 2 MB. As with htcacheclean, IOwait goes up to 25% when running the prune script continuously. Any idea? Is this a problem specific to the (rather slow) iSCSI storage? Should I choose a different file system for a huge disk_cache? ext2? ext4? Are there any kernel parameter optimizations for this kind of scenario? (I already tried the deadline scheduler and a smaller read_ahead_kb, without effect).

  Read the article

• Nginx Load Balancer 403 error

  - by user64473

  I am trying to install nginx as a load balancer with apache backends, so that when I point my sites to the nginx server it serves up the content from the apache backend. I have the apache configuration set up correctly on both (i.e when I go to the site on the apache servers it works great) but when I use the nginx load balancer as the site I get 403 error. I have no idea why as it isn't even accessing any files on the server, thusly there aren't any files to be forbidden access to. My virtual host is enabled and looks like this: upstream webs { server 10.0.0.30 weight=1; server 10.0.0.31 weight=1; } server { listen 80; server_name www.example.com example.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://webs; include /etc/nginx/proxy.conf; } } and my nginx.conf looks like this: user www-data; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } Can any geniuses out there tell me what I am doing wrong?

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• EBS Techstack Sessions at OAUG/Collaborate 2010

  - by Steven Chan

  We have a large contingent of E-Business Suite Applications Technology Group staff rolling out to the OAUG/Collaborate 2010 conference in Las Vegas new week.  Our Applications Technology Group staff will be appearing as guest speakers or full-speakers at the following E-Business Suite technology stack related sessions:Database Special Interest GroupSunday, April 18, 11:00 AM, Breakers FSIG Leaders:  Michael Brown, Colibri; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanCovering database upcoming and past desupport dates, and database support policies as they apply to E-Business Suite environments, general Q&A E-Business Suite Technology Stack Special Interest GroupSunday, April 18, 3:00 PM, Breakers FSIG Leaders:  Elke Phelps, Paul Jackson, HumanaGuest Speaker:  Steven ChanCovering the latest EBS technology stack certifications, roadmap, desupport noticesupgrade options for Discoverer, OID, SSO, Portal, general Q&A E-Business Suite Applications Technology Roadmap & VisionMonday, April 19, 8:00 AM, South Seas GOracle Speaker:  Uma PrabhalaLatest developments for SOA, AOL, OAF, Web ADI, SES, AMP, ACMP, security, and other technologies Oracle E-Business Suite Applications Strategy and General Manager UpdateMonday, April 19, 2:30 PM, Mandalay Bay Ballroom DOracle Speaker:  Cliff GodwinUpdate on the entire Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle's overall applications strategy 10 Things You Can Do Today to Prepare for the Next Generation ApplicationsTuesday, April 20, 8:00 AM, South Seas FOracle Speaker:  Nadia Bendjedou"Common sense" and "practical" steps that can be taken today to increase the value of your Oracle Applications (E-Business Suite, PeopleSoft, Siebel, and JDE) investments by using the latest Oracle solutions and technologiesReducing TCO using Oracle E-Business Suite Management PacksTuesday, April 20, 10:30 AM, South Seas EOracle Speaker:  Angelo RosadoLearn how you can reduce the Total Cost of Ownership by implementing Application Management Pack (AMP) and Application Change Management Pack (ACP) for E-Business Suite 11i, R12, R12.1. AMP is Oracle's next generation system manageability product offering that provides a centralized platform to manage and maintain EBS. ACP is Oracle's offering to monitor and manage E-Business Suite changes in the areas of E-Business Suite Customizations, Patches and Functional Setups. E-Business Suite Upgrade Special Interest GroupTuesday, April 20, 3:15 PM, South Seas ESIG Leaders:  John Stouffer; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanParticipating in general Q&A E-Business Suite Technology Essentials: Using the Latest Oracle Technologies with E-Business Suite Wednesday, April 21, 8:00 AM, South Seas HOracle Speaker:  Lisa ParekhOracle continues to build new functionality into the Oracle Database, Fusion Middleware, and Enterprise Manager. Come see how you can enhance the value of E-Business Suite for your users and lower your costs of ownership by utilizing the latest features of these Oracle technologies with E-Business Suite. Learn about the latest advanced E-Business Suite topologies and features, including new options for security, performance, third-party integration, SOA, virtualization, clouds, systems management, and much more How to Leverage the New E-Business Suite R12.1 Solutions Without Upgrading your 11.5.10 EnvironmentWednesday, April 21, 10:30 AMOracle Speaker:  Nadia Bendjedou, South Seas ELearn how you can use the latest E-Business Suite 12.1 standalone solutions without upgrading from your E-Business Suite 11.5.10 environment Web 2.0 User Experience and Oracle Fusion Middleware Integration with Oracle E-Business SuiteWednesday, April 21, 4:00 PM, South Seas FOracle Speaker:  Padmaprabodh AmbaleSee the next generation Oracle E-Business Suite OA framework improvements that will provide new rich interactions in components such as LOV, Tables and Attachments.  See  new components like the Rich Container that allows any Web 2.0 content like Flash or OBIEE to be embedded in OA Framework pages. Advanced Technology Deployment Architectures for E-Business Suite Wednesday, April 21, 2:15 PM, South Seas EOracle Speaker:  Steven ChanLearn how to take advantage of the latest version of Oracle Fusion Middleware with Oracle E-Business Suite. Learn how to utilize identity management systems and LDAP directories. In addition, come to this session for answers about advanced network deployments involving reverse proxy servers, load balancers, and DMZ's, and to see how you can take benefit from virtualization and new system management capabilities. Upgrading to Oracle E-Business Suite 12.1 - Best PracticesThursday, April 22, 11:00 AM, South Seas EOracle Speaker:  Lester Gutierrez, Udayan ParvateFundamental of upgrading to Release 12.1, which includes the technology stack components and differences, the upgrade path from various releases of Oracle E-Business Suite, upgrade steps, monitoring the upgrade, hints and tips for minimizing downtime and upgrade best practices for making the upgrade to Release 12.1 a success.  We look forward to seeing you there!

  Read the article

• Using Web Services from an XNA 4.0 WP7 Game

  - by Michael Cummings

  Now that the Windows Phone 7 development tools have been out for a while, let’s talk about how you can use them. Windows Phone 7 ( WP7 ) has two application types that you can create, either Silverlight or XNA, and you can’t really mix the two together. The development environment for WP7 is a special edition of Visual Studio 2010 called Visual Studio 2010 Express for Windows Phone. This edition will be installed with the WP7 tools, even if you have a full edition of VS2010 already installed. While you can use your full edition of VS2010 to do WP7 development, this astute developer has noticed that there are a few things that you can only do in the Express for Windows Phone edition. So lets start by discussing WP7 networking. On the WP7 platform the only networking available is through Web Services using WCF or if you’re really masochistic, you’ll use the WebClient to do http. In Silverlight, it’s fairly easy to wire up a WCF proxy to call a web service and get some data. In the XNA projects, not so much. Create WCF Service First, we’ll create our service that will return some information that we need in our game. Open Visual Studio 2010, and create a new WCF Web Service project. We’ll use the default implementation as we only need to see how to use a service, we are not interested in creating a really cool service at this point. However you may want to follow the instructions in the comments of Service1.svc.cs to change the name to something better, I used DataService and IDataService for the interface. You should now be able to run the project and the WCF Test Client will load and properly enumerate your service. At this point we have a functional service that can be consumed by our XNA game. Consume the WCF Service Open Visual Studio 2010 Express for Windows Phone and create a new XNA Game Studio 4.0 Windows Phone Game project. Now if you try to add a service reference to the project, you’ll notice that the option is not available. However, if you add a Silverlight application to your solution, you’ll notice that you can create a service reference there. So using the Silverlight project, we can create the service reference. Unfortunately you can’t reference the Silverlight project from the XNA Game project, so using Windows Explorer copy the Service References folder from the Silverlight project directory to the XNA Game project directory, then add the folder to your XNA Game project. You’ll need to set the property Build Action to None for all the files, except for Reference.cs, which should be Build. Truely, we only need Reference.cs but I find it easier to copy the whole folder. If you try to compile at this point, you’ll notice that we are missing  a couple of references, System.Runtime.Serialization, System.Net and System.ServiceModel. Add these to the XNA Game project and you should build successfully. You’ll also need to copy the ServiceReference.ClientConfig file and add it to your project. The WCF infrastructure looks for this file and will complain if it can’t find it. You’ll need to set the Copy to Output Directory property to Copy if Newer. We now need to add the code to call the service and display the results on the screen. Go ahead and add a SpriteFont resource to the Content project and load it in the Game project. There’s nothing here that’s changed much from 3.1 other than your Content project is now under the Solution node and not the Project node. While you’re at it, add a string field to store the result of the service call, and intialize it to string.Empty. Then in the Draw method, write the string out to the screen, only if it does not equal string.Empty. Now to wrap this up, lets create a new field that’s of the type DataServiceClient. In the Initialize Method, create a new instance of this type using its default contructor, then in the LoadContent we can call the service. Since we can only call the GetData method of our service asynchronously we need to set up a Completed event handler first. Thankfully, Visual Studio helps out a lot there just create, using the tab key whatever VS says to. In the GetDataAsyncCompleted event handler assign the service result ( e.Result) to your string field. If you run your game, you should get something like this : Enjoy!

  Read the article

• LLBLGen Pro v3.5 has been released!

  - by FransBouma

  Last weekend we released LLBLGen Pro v3.5! Below the list of what's new in this release. Of course, not everything is on this list, like the large amount of work we put in refactoring the runtime framework. The refactoring was necessary because our framework has two paradigms which are added to the framework at a different time, and from a design perspective in the wrong order (the paradigm we added first, SelfServicing, should have been built on top of Adapter, the other paradigm, which was added more than a year after the first released version). The refactoring made sure the framework re-uses more code across the two paradigms (they already shared a lot of code) and is better prepared for the future. We're not done yet, but refactoring a massive framework like ours without breaking interfaces and existing applications is ... a bit of a challenge ;) To celebrate the release of v3.5, we give every customer a 30% discount! Use the coupon code NR1ORM with your order :) The full list of what's new: Designer Rule based .NET Attribute definitions. It's now possible to specify a rule using fine-grained expressions with an attribute definition to define which elements of a given type will receive the attribute definition. Rules can be assigned to attribute definitions on the project level, to make it even easier to define attribute definitions in bulk for many elements in the project. More information... Revamped Project Settings dialog. Multiple project related properties and settings dialogs have been merged into a single dialog called Project Settings, which makes it easier to configure the various settings related to project elements. It also makes it easier to find features previously not used  by many (e.g. type conversions) More information... Home tab with Quick Start Guides. To make new users feel right at home, we added a home tab with quick start guides which guide you through four main use cases of the designer. System Type Converters. Many common conversions have been implemented by default in system type converters so users don't have to develop their own type converters anymore for these type conversions. Bulk Element Setting Manipulator. To change setting values for multiple project elements, it was a little cumbersome to do that without a lot of clicking and opening various editors. This dialog makes changing settings for multiple elements very easy. EDMX Importer. It's now possible to import entity model data information from an existing Entity Framework EDMX file. Other changes and fixes See for the full list of changes and fixes the online documentation. LLBLGen Pro Runtime Framework WCF Data Services (OData) support has been added. It's now possible to use your LLBLGen Pro runtime framework powered domain layer in a WCF Data Services application using the VS.NET tools for WCF Data Services. WCF Data Services is a Microsoft technology for .NET 4 to expose your domain model using OData. More information... New query specification and execution API: QuerySpec. QuerySpec is our new query specification and execution API as an alternative to Linq and our more low-level API. It's build, like our Linq provider, on top of our lower-level API. More information... SQL Server 2012 support. The SQL Server DQE allows paging using the new SQL Server 2012 style. More information... System Type converters. For a common set of types the LLBLGen Pro runtime framework contains built-in type conversions so you don't need to write your own type converters anymore. Public/NonPublic property support. It's now possible to mark a field / navigator as non-public which is reflected in the runtime framework as an internal/friend property instead of a public property. This way you can hide properties from the public interface of a generated class and still access it through code added to the generated code base. FULL JOIN support. It's now possible to perform FULL JOIN joins using the native query api and QuerySpec. It's left to the developer to check whether the used target database supports FULL (OUTER) JOINs. Using a FULL JOIN with entity fetches is not recommended, and should only be used when both participants in the join aren't the target of the fetch. Dependency Injection Tracing. It's now possible to enable tracing on dependency injection. Enable tracing at level '4' on the traceswitch 'ORMGeneral'. This will emit trace information about which instance of which type got an instance of type T injected into property P. Entity Instances in projections in Linq. It's now possible to return an entity instance in a custom Linq projection. It's now also possible to pass this instance to a method inside the query projection. Inheritance fully supported in this construct. Entity Framework support The Entity Framework has been updated in the recent year with code-first support and a new simpler context api: DbContext (with DbSet). The amount of code to generate is smaller and the context simpler. LLBLGen Pro v3.5 comes with support for DbContext and DbSet and generates code which utilizes these new classes. NHibernate support NHibernate v3.2+ built-in proxy factory factory support. By default the built-in ProxyFactoryFactory is selected. FluentNHibernate Session Manager uses 1.2 syntax. Fluent NHibernate mappings generate a SessionManager which uses the v1.2 syntax for the ProxyFactoryFactory location Optionally emit schema / catalog name in mappings Two settings have been added which allow the user to control whether the catalog name and/or schema name as known in the project in the designer is emitted into the mappings.

  Read the article

• Simple-Talk development: a quick history lesson

  - by Michael Williamson

  Up until a few months ago, Simple-Talk ran on a pure .NET stack, with IIS as the web server and SQL Server as the database. Unfortunately, the platform for the site hadn’t quite gotten the love and attention it deserved. On the one hand, in the words of our esteemed editor Tony “I’d consider the current platform to be a “success”; it cost $10K, has lasted for 6 years, was finished, end to end in 6 months, and although we moan about it has got us quite a long way.” On the other hand, it was becoming increasingly clear that it needed some serious work. Among other issues, we had authors that wouldn’t blog because our current blogging platform, Community Server, was too painful for them to use. Forgetting about Simple-Talk for a moment, if you ask somebody what blogging platform they’d choose, the odds are they’d say WordPress. Regardless of its technical merits, it’s probably the most popular blogging platform, and it certainly seemed easier to use than Community Server. The issue was that WordPress is normally hosted on a Linux stack running PHP, Apache and MySQL — quite a difference from our Microsoft technology stack. We certainly didn’t want to rewrite the entire site — we just wanted a better blogging platform, with the rest of the existing, legacy site left as is. At a very high level, Simple-Talk’s technical design was originally very straightforward: when your browser sends an HTTP request to Simple-Talk, IIS (the web server) takes the request, does some work, and sends back a response. In order to keep the legacy site running, except with WordPress running the blogs, a different design is called for. We now use nginx as a reverse-proxy, which can then delegate requests to the appropriate application: So, when your browser sends a request to Simple-Talk, nginx takes that request and checks which part of the site you’re trying to access. Most of the time, it just passes the request along to IIS, which can then respond in much the same way it always has. However, if your request is for the blogs, then nginx delegates the request to WordPress. Unfortunately, as simple as that diagram looks, it hides an awful lot of complexity. In particular, the legacy site running on IIS was made up of four .NET applications. I’ve already mentioned one of these applications, Community Server, which handled the old blogs as well as managing membership and the forums. We have a couple of other applications to manage both our newsletters and our articles, and our own custom application to do some of the rendering on the site, such as the front page and the articles. When I say that it was made up of four .NET applications, this might conjure up an image in your mind of how they fit together: You might imagine four .NET applications, each with their own database, communicating over well-defined APIs. Sadly, reality was a little disappointing: We had four .NET applications that all ran on the same database. Worse still, there were many queries that happily joined across tables from multiple applications, meaning that each application was heavily dependent on the exact data schema that each other application used. Add to this that many of the queries were at least dozens of lines long, and practically identical to other queries except in a few key spots, and we can see that attempting to replace one component of the system would be more than a little tricky. However, the problems with the old system do give us a good place to start thinking about desirable qualities from any changes to the platform. Specifically: Maintainability — the tight coupling between each .NET application made it difficult to update any one application without also having to make changes elsewhere Replaceability — the tight coupling also meant that replacing one component wouldn’t be straightforward, especially if it wasn’t on a similar Microsoft stack. We’d like to be able to replace different parts without having to modify the existing codebase extensively Reusability — we’d like to be able to combine the different pieces of the system in different ways for different sites Repeatable deployments — rather than having to deploy the site manually with a long list of instructions, we should be able to deploy the entire site with a single command, allowing you to create a new instance of the site easily whether on production, staging servers, test servers or your own local machine Testability — if we can deploy the site with a single command, and each part of the site is no longer dependent on the specifics of how every other part of the site works, we can begin to run automated tests against the site, and against individual parts, both to prevent regressions and to do a little test-driven development In the next part, I’ll describe the high-level architecture we now have that hopefully brings us a little closer to these five traits.

  Read the article

• top tweets WebLogic Partner Community – March 2012

  - by JuergenKress

  Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity PeterPaul ? RT @JDeveloper: EJB 3 Deployment guide for WebLogic Server Version: 10.3.4.0 dlvr.it/1J5VcV Andrejus Baranovskis ?Open ADF PopUp on Page Load fb.me/1Rx9LP3oW Sten Vesterli ? RT @OracleBlogs: Using the Oracle E-Business Suite SDK for Java on ADF Applications ow.ly/1hVKbB <- Neat! No more WS calls Java Buddy ?JavaFX 2.0: Example of MediaPlay java-buddy.blogspot.com/2012/03/javafx… Georges Saab Build improvements coming to #openJDK for #jdk8 mail.openjdk.java.net/pipermail/buil… NetBeans Team Share your #Java experience! JavaOne 2012 India call for papers: ow.ly/9xYg0 GlassFish ? GlassFish 3.1.2 Screencasts & Videos – bit.ly/zmQjn2 chriscmuir ?G+: New blog post: ADF Runtimes vs WLS versions as of JDeveloper 11.1.1.6.0 – bit.ly/y8tkgJ Michael Heinrichs New article: Creating a Sprite Animation with JavaFX blog.netopyr.com/2012/03/09/cre… Oracle WebLogic ? #WebLogic Devcast Webinar Series for March: Enterprise Java Scale Out, JPA, Distributed Grid Data Cache bit.ly/zeUXEV #Coherence Andrejus Baranovskis ?Extending Application Module for ADF BC Proxy User DB Connection fb.me/Bj1hLUqm OTNArchBeat ? Oracle Fusion Middleware on JDK 7 | Mark Nelson bit.ly/w7IroZ OTNArchBeat ? Java Champion Jonas Bonér Explains the Akka Platform bit.ly/x2GbXm Adam Bien ? (Java) FX Experience Tools–Feels Like Native Mac App: FX Experience Tools application comes with a native Mac O… bit.ly/waHF3H GlassFish ? GlassFish new recruit and Eclipse integration progress – bit.ly/y5eEkk JDeveloper & ADF Prototyping ADF Libraries dlvr.it/1Hhnw0 Eric Elzinga ?Oracle Fusion Middleware on JDK 7, bit.ly/xkphFQ ADF EMG ? Working with ADF in Arabic, Hebrew or other right-to-left-written language? Oracle UX asks for your help. groups.google.com/forum/?fromgro… Java ? A simple #JavaFX Login Form with a TRON like effect ow.ly/9n9AG JDeveloper & ADF ? Logging in Oracle ADF Applications dlvr.it/1HZhcX OTNArchBeat ? Oracle Cloud Conference: dates and locations worldwide bit.ly/ywXydR UK Oracle User Group ? Simon Haslam, ACE Director present on #WebLogic for DBAs at #oug_ire2012 j.mp/zG6vz3 @oraclewebcenter @oracleace #dublin Steven Davelaar ? Working with ADF and not a member of ADF EMG? You miss lots of valuable info, join now! sites.google.com/site/oracleemg… Simon Haslam @MaciejGruszka: Oracle plans to provide Forms & Reports plug-in for OVAB next year to help deployment. #ukoug MW SIG GlassFish ? Introducing JSR 357: Social Media API – bit.ly/yC8vez JAX London ? Are you coming to Java EE workshops by @AdamBien at JAX Days? Save £100 by registering today. #jaxdays #javaee jaxdays.com WebLogic Community ?Welcome to our Munich WebLogic 12c Bootcamp in Munich! If you also want to attend a training register for the Community oracle.com/partners/goto/… chriscmuir ? My first webcast for Oracle! (be kind) Basing ADF Business Component View Objects on More that one Entity Object bit.ly/ArKija OTNArchBeat ? Oracle Weblogic Server 12c is available on Oracle Solaris 11 (SPARC and x86) bit.ly/xE3TLg JDeveloper & ADF ? Basing ADF Business Component View Objects on More that one Entity Object – YouTube dlvr.it/1H93Qr OTNArchBeat ? Application-Driven Virtualization with Oracle Virtual Assembly Builder | Ronen Kofman bit.ly/wF1C1N Oracle WebLogic ? Steve Button’s blog: WebLogic Server Singleton Services ow.ly/1hOu4U Barbara Ann May ?@oracledevtools: New update: #NetBeans IDE 7.1.1, with support for #GlassFish 3.1.2 bit.ly/mOLcQd #java #developer OTNArchBeat ? Using Coherence with JDeveloper: bit.ly/AkoEQb WebLogic Community ? WebLogic Partner Community Newsletter February 2012 wp.me/p1LMIb-f3 GlassFish ? GlassFish 3.1.2 – new Podcast episode : bit.ly/wc6oBE Frank Nimphius ?Cool! Open JDeveloper 11.1.1.5, go help–>check for updates. First thing shown is that 11.1.1.6 is available. Never miss a new release Adam Bien ?5 Minutes (Video) With Java EE …Or With NetBeans + GlassFish: This screencast covers a 5-minute development of a… bit.ly/xkOJMf WebLogic Community ? Free Oracle WebLogic Certification Application Grid Implementation Specialist wp.me/p1LMIb-eT OTNArchBeat ?Oracle Coherence: First Steps Using Clusters and Basic API Usage | Ricardo Ferreira bit.ly/yYQ3Wz GlassFish ? JMS 2.0 Early Draft is here – bit.ly/ygT1VN OTNArchBeat ? Exalogic Networking Part 2 | The Old Toxophilist bit.ly/xuYMIi OTNArchBeat ?New Release: GlassFish Server 3.1.2. Read All About It! | Paul Davies bit.ly/AtlGxo Oracle WebLogic ?OTN Virtual Developer Day: #WebLogic 12c & #Coherence ost-conference on-demand page live with bonus #Virtualbox lab – bit.ly/xUy6BJ Oracle WebLogic ? Steve Button’s blog: WebLogic Server 11g (10.3.6) Documentation ow.ly/1hJgUB Lucas Jellema ? Just published an article on the AMIS blog: technology.amis.nl/2012/03/adf-11… ADF 11g – programmatically sorting rich table columns. Java Certification ? New Course! Learn how to create mobile applications using Java ME: bit.ly/xZj1Jh Simon Haslam ? @MaciejGruszka WebLogic 12c can run against 11g domain config without changes …and can rollback to 11. #ukoug MW SIG Justin Kestelyn ? Learn Advanced ADF, free and online bit.ly/wEKSRc WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress,WebLogic 12c

  Read the article

• Timeout Considerations for Solicit Response – Part 2

  - by Michael Stephenson

  To follow up a previous article about timeouts and how they can affect your application I have extended the sample we were using to include WCF. I will execute some test scenarios and discuss the results. The sample We begin by consuming exactly the same web service which is sitting on a remote server. This time I have created a .net 3.5 application which will consume the web service using the basichttp binding. To show you the configuration for the consumption of this web service please refer to the below diagram. You can see like before we also have the connectionManagement element in the configuration file. I have added a WCF service reference (also using the asynchronous proxy methods) and have the below code sample in the application which will asynchronously make the web service calls and handle the responses on a call back method invoked by a delegate. If you have read the previous article you will notice that the code is almost the same.   Sample 1 – WCF with Default Timeouts In this test I set about recreating the same scenario as previous where we would run the test but this time using WCF as the messaging component. For the first test I would use the default configuration settings which WCF had setup when we added a reference to the web service. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client-side trace is as follows:   The server-side trace is as follows: Some observations on the results are as follows: The timeouts happened quicker than in the previous tests because some calls were timing out before they attempted to connect to the server The first few calls that timed out did actually connect to the server and did execute successfully on the server   Test 2 – Increase Open Connection Timeout & Send Timeout In this test I wanted to increase both the send and open timeout values to try and give everything a chance to go through. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The client side trace for this test was   The server-side trace for this test was: Some observations on this test are: This test proved if the timeouts are high enough everything will just go through   Test 3 – Increase just the Send Timeout In this test we wanted to increase just the send timeout. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The below is the client side trace The below is the server side trace Some observations on this test are: In this test from both the client and server perspective everything ran through fine The open connection timeout did not seem to have any effect   Test 4 – Increase Just the Open Connection Timeout In this test I wanted to validate the change to the open connection setting by increasing just this on its own. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client side trace was The server side trace was Some observations on this test are: In this test you can see that the open connection which relates to opening the channel timeout increase was not the thing which stopped the calls timing out It's the send of data which is timing out On the server you can see that the successful few calls were fine but there were also a few calls which hit the server but timed out on the client You can see that not all calls hit the server which was one of the problems with the WSE and ASMX options   Test 5 – Smaller Increase in Send Timeout In this test I wanted to make a smaller increase to the send timeout than previous just to prove that it was the key setting which was controlling what was timing out. The timeout values for this test are: openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:02:30"   The Test We simulated 21 calls to the web service Test Results The client side trace was   The server side trace was Some observations on this test are: You can see that most of the calls got through fine On the client you can see that call 20 timed out but still hit the server and executed fine.   Summary At this point between the two articles we have quite a lot of scenarios showing the different way the timeout setting have played into our original performance issue, and now we can see how WCF could offer an improved way to handle the problem. To summarise the differences in the timeout properties for the three technology stacks: ASMX The timeout value only applies to the execution time of your request on the server. The timeout does not consider how long your code might be waiting client side to get a connection. WSE The timeout value includes both the time to obtain a connection and also the time to execute the request. A timeout will not be thrown as an error until an attempt to connect to the server is made. This means a 40 second timeout setting may not throw the error until 60 seconds when the connection to the server is made. If the connection to the server is made you should be aware that your message will be processed and you should design for this. WCF The WCF send timeout is the setting most equivalent to the settings we were looking at previously. Like WSE this setting the counter includes the time to get a connection as well as the time to execute on a server. Unlike WSE and ASMX an error will be thrown as soon as the send timeout from making your call from user code has elapsed regardless of whether we are waiting for a connection or have an open connection to the server. This may to a user appear to have better latency in getting an error response compared to WSE or ASMX.

  Read the article

• Virtual host in Apache Zend

  - by llocani

  I'd like to ask you if you can tell me why I can't get Vhost in Apache to work my Vhostconf is: NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] DocumentRoot "E:/Archivos de programa/Zend/Apache2/htdocs" ServerName localhost <Directory "E:/Archivos de programa/Zend/Apache2/htdocs"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> #AllowOveride all </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands" ServerName healinghands.loc <Directory "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands/logs/error.log" CustomLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/HealingHands/logs/access.log" common #AllowOveride all </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects" ServerName dev.loc <Directory "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/logs/error.log" CustomLog "E:/Documents and Settings/dvieira/Mis documentos/NetBeansProjects/logs/access.log" common #AllowOveride all </VirtualHost> My httpd.conf is: ServerRoot "E:\Archivos de programa\Zend\Apache2" Listen 80 LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule filter_module modules/mod_filter.so LoadModule headers_module modules/mod_headers.so LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so LoadModule userdir_module modules/mod_userdir.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> ServerAdmin [email protected] DocumentRoot "E:\Archivos de programa\Zend\Apache2/htdocs" <Directory /> Options FollowSymLinks AllowOverride all Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.php index.html home.php </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "logs/access.log" common </IfModule> <IfModule alias_module> Alias /NetBeansProjects "E:\Documents and Settings\dvieira\Mis documentos\NetBeansProjects" ScriptAlias /cgi-bin/ "E:\Archivos de programa\Zend\Apache2/cgi-bin/" </IfModule> <IfModule cgid_module> </IfModule> <Directory "E:\Archivos de programa\Zend\Apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> Include conf/extra/httpd-vhosts.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include "conf/zend.conf" NameVirtualHost *:80 <VirtualHost *:80> Include "E:\Archivos de programa\Zend\ZendServer/etc/sites.d/zend-default-vhost-80.conf" </VirtualHost> Include "E:\Archivos de programa\Zend\ZendServer/etc/sites.d/globals-*.conf" Include "E:\Archivos de programa\Zend\ZendServer/etc/sites.d/vhost_*.conf" And my host in Windows: 127.0.0.1 localhost 127.0.0.1 healinghands.loc 127.0.0.1 dev.loc And I can't get any of the browser to recognize dev.loc or healinghands.loc but a ping does it. Localhost is working fine. I've spent 3 days now traying to solve this for my one but I finally quit and have to ask. The error should be this Error Code 11002: host not found. Background: this error indicates that the gateway could not find an authoritative DNS server for the website you are trying to access. Date: 5/20/2013 5:51:03 PM Server: Source: DNS problem. i'd like to add this ping Haciendo ping a healinghands.loc [127.0.0.1] con 32 bytes de datos: Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Respuesta desde 127.0.0.1: bytes=32 tiempo<1m TTL=128 Estadísticas de ping para 127.0.0.1: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms Today i've tryed something: i've add this domains into the exceptions of mi ie proxy config. This worked for healinghands.loc but not for dev.loc i really do not understand why, both config are exactly the same except for de documentroot. I will continue searching

  Read the article

• C# async and actors

  - by Alex.Davies

  If you read my last post about async, you might be wondering what drove me to write such odd code in the first place. The short answer is that .NET Demon is written using NAct Actors. Actors are an old idea, which I believe deserve a renaissance under C# 5. The idea is to isolate each stateful object so that only one thread has access to its state at any point in time. That much should be familiar, it's equivalent to traditional lock-based synchronization. The different part is that actors pass "messages" to each other rather than calling a method and waiting for it to return. By doing that, each thread can only ever be holding one lock. This completely eliminates deadlocks, my least favourite concurrency problem. Most people who use actors take this quite literally, and there are plenty of frameworks which help you to create message classes and loops which can receive the messages, inspect what type of message they are, and process them accordingly. But I write C# for a reason. Do I really have to choose between using actors and everything I love about object orientation in C#? Type safety Interfaces Inheritance Generics As it turns out, no. You don't need to choose between messages and method calls. A method call makes a perfectly good message, as long as you don't wait for it to return. This is where asynchonous methods come in. I have used NAct for a while to wrap my objects in a proxy layer. As long as I followed the rule that methods must always return void, NAct queued up the call for later, and immediately released my thread. When I needed to get information out of other actors, I could use EventHandlers and callbacks (continuation passing style, for any CS geeks reading), and NAct would call me back in my isolated thread without blocking the actor that raised the event. Using callbacks looks horrible though. To remind you: m_BuildControl.FilterEnabledForBuilding(    projects,    enabledProjects = m_OutOfDateProjectFinder.FilterNeedsBuilding(        enabledProjects,             newDirtyProjects =             {                 ....... Which is why I'm really happy that NAct now supports async methods. Now, methods are allowed to return Task rather than just void. I can await those methods, and C# 5 will turn the rest of my method into a continuation for me. NAct will run the other method in the other actor's context, but will make sure that when my method resumes, we're back in my context. Neither actor was ever blocked waiting for the other one. Apart from when they were actually busy doing something, they were responsive to concurrent messages from other sources. To be fair, you could use async methods with lock statements to achieve exactly the same thing, but it's ugly. Here's a realistic example of an object that has a queue of data that gets passed to another object to be processed: class QueueProcessor {    private readonly ItemProcessor m_ItemProcessor = ...     private readonly object m_Sync = new object();    private Queue<object> m_DataQueue = ...    private List<object> m_Results = ...     public async Task ProcessOne() {         object data = null;         lock (m_Sync)         {             data = m_DataQueue.Dequeue();         }         var processedData = await m_ItemProcessor.ProcessData(data); lock (m_Sync)         {             m_Results.Add(processedData);         }     } } We needed to write two lock blocks, one to get the data to process, one to store the result. The worrying part is how easily we could have forgotten one of the locks. Compare that to the version using NAct: class QueueProcessorActor : IActor { private readonly ItemProcessor m_ItemProcessor = ... private Queue<object> m_DataQueue = ... private List<object> m_Results = ... public async Task ProcessOne()     {         // We are an actor, it's always thread-safe to access our private fields         var data = m_DataQueue.Dequeue();         var processedData = await m_ItemProcessor.ProcessData(data);         m_Results.Add(processedData);     } } You don't have to explicitly lock anywhere, NAct ensures that your code will only ever run on one thread, because it's an actor. Either way, async is definitely better than traditional synchronous code. Here's a diagram of what a typical synchronous implementation might do: The left side shows what is running on the thread that has the lock required to access the QueueProcessor's data. The red section is where that lock is held, but doesn't need to be. Contrast that with the async version we wrote above: Here, the lock is released in the middle. The QueueProcessor is free to do something else. Most importantly, even if the ItemProcessor sometimes calls the QueueProcessor, they can never deadlock waiting for each other. So I thoroughly recommend you use async for all code that has to wait a while for things. And if you find yourself writing lots of lock statements, think about using actors as well. Using actors and async together really takes the misery out of concurrent programming.

  Read the article

• JDK bug migration: components and subcomponents

  - by darcy

  One subtask of the JDK migration from the legacy bug tracking system to JIRA was reclassifying bugs from a three-level taxonomy in the legacy system, (product, category, subcategory), to a fundamentally two-level scheme in our customized JIRA instance, (component, subcomponent). In the JDK JIRA system, there is technically a third project-level classification, but by design a large majority of JDK-related bugs were migrated into a single "JDK" project. In the end, over 450 legacy subcategories were simplified into about 120 subcomponents in JIRA. The 120 subcomponents are distributed among 17 components. A rule of thumb used was that a subcategory had to have at least 50 bugs in it for it to be retained. Below is a listing the component / subcomponent classification of the JDK JIRA project along with some notes and guidance on which OpenJDK email addresses cover different areas. Eventually, a separate incidents project to host new issues filed at bugs.sun.com will use a slightly simplified version of this scheme. The preponderance of bugs and subcomponents for the JDK are in library-related areas, with components named foo-libs and subcomponents primarily named after packages. While there was an overall condensation of subcomponents in the migration, in some cases long-standing informal divisions in core libraries based on naming conventions in the description were promoted to formal subcomponents. For example, hundreds of bugs in the java.util subcomponent whose descriptions started with "(coll)" were moved into java.util:collections. Likewise, java.lang bugs starting with "(reflect)" and "(proxy)" were moved into java.lang:reflect. client-libs (Predominantly discussed on 2d-dev and awt-dev and swing-dev.) 2d demo java.awt java.awt:i18n java.beans (See beans-dev.) javax.accessibility javax.imageio javax.sound (See sound-dev.) javax.swing core-libs (See core-libs-dev.) java.io java.io:serialization java.lang java.lang.invoke java.lang:class_loading java.lang:reflect java.math java.net java.nio (Discussed on nio-dev.) java.nio.charsets java.rmi java.sql java.sql:bridge java.text java.util java.util.concurrent java.util.jar java.util.logging java.util.regex java.util:collections java.util:i18n javax.annotation.processing javax.lang.model javax.naming (JNDI) javax.script javax.script:javascript javax.sql org.openjdk.jigsaw (See jigsaw-dev.) security-libs (See security-dev.) java.security javax.crypto (JCE: includes SunJCE/MSCAPI/UCRYPTO/ECC) javax.crypto:pkcs11 (JCE: PKCS11 only) javax.net.ssl (JSSE, includes javax.security.cert) javax.security javax.smartcardio javax.xml.crypto org.ietf.jgss org.ietf.jgss:krb5 other-libs corba corba:idl corba:orb corba:rmi-iiop javadb other (When no other subcomponent is more appropriate; use judiciously.) Most of the subcomponents in the xml component are related to jaxp. xml jax-ws jaxb javax.xml.parsers (JAXP) javax.xml.stream (JAXP) javax.xml.transform (JAXP) javax.xml.validation (JAXP) javax.xml.xpath (JAXP) jaxp (JAXP) org.w3c.dom (JAXP) org.xml.sax (JAXP) For OpenJDK, most JVM-related bugs are connected to the HotSpot Java virtual machine. hotspot (See hotspot-dev.) build compiler (See hotspot-compiler-dev.) gc (garbage collection, see hotspot-gc-dev.) jfr (Java Flight Recorder) jni (Java Native Interface) jvmti (JVM Tool Interface) mvm (Multi-Tasking Virtual Machine) runtime (See hotspot-runtime-dev.) svc (Servicability) test core-svc (See serviceability-dev.) debugger java.lang.instrument java.lang.management javax.management tools The full JDK bug database contains entries related to legacy virtual machines that predate HotSpot as well as retired APIs. vm-legacy jit (Sun Exact VM) jit_symantec (Symantec VM, before Exact VM) jvmdi (JVM Debug Interface ) jvmpi (JVM Profiler Interface ) runtime (Exact VM Runtime) Notable command line tools in the $JDK/bin directory have corresponding subcomponents. tools appletviewer apt (See compiler-dev.) hprof jar javac (See compiler-dev.) javadoc(tool) (See compiler-dev.) javah (See compiler-dev.) javap (See compiler-dev.) jconsole launcher updaters (Timezone updaters, etc.) visualvm Some aspects of JDK infrastructure directly affect JDK Hg repositories, but other do not. infrastructure build (See build-dev and build-infra-dev.) licensing (Covers updates to the third party readme, licenses, and similar files.) release_eng (Release engineering) staging (Staging of web pages related to JDK releases.) The specification subcomponent encompasses the formal language and virtual machine specifications. specification language (The Java Language Specification) vm (The Java Virtual Machine Specification) The code for the deploy and install areas is not currently included in OpenJDK. deploy deployment_toolkit plugin webstart install auto_update install servicetags In the JDK, there are a number of cross-cutting concerns whose organization is essentially orthogonal to other areas. Since these areas generally have dedicated teams working on them, it is easier to find bugs of interest if these bugs are grouped first by their cross-cutting component rather than by the affected technology. docs doclet guides hotspot release_notes tools tutorial embedded build hotspot libraries globalization locale-data translation performance hotspot libraries The list of subcomponents will no doubt grow over time, but my inclination is to resist that growth since the addition of each subcomponent makes the system as a whole more complicated and harder to use. When the system gets closer to being externalized, I plan to post more blog entries describing recommended use of various custom fields in the JDK project.

  Read the article

• Upgrading Agent Controllers in Oracle Enterprise Manager Ops Center 12c

  - by S Stelting

  Oracle Enterprise Manager Ops Center 12c recently released an upgrade for Solaris Agent Controllers. In this week's blog post, we'll show you how to upgrade agent controllers. Detailed instructions about upgrading Agent Controllers are available in the product documentation here. This blog post uses an Enterprise Controller which is configured for connected mode operation. If you'd like to apply the agent update in a disconnected installation, additional instructions are available here. Step 1: Download Agent Controller Updates With a connected mode Ops Center installation, you can check for product updates at any time by selecting the Enterprise Controller from the left-hand Administration navigation tab. Select the right-hand Action link “Ops Center Downloads” to open a pop-up dialog displaying any new product updates. In this example, the Enterprise Controller has already been upgraded to the latest version (Update 1, also shown as build version 2076) so only the Agent Controller updates will appear. There are three updates available: one for Solaris 10 X86, one for Solaris 8-10 SPARC, and one for all versions of Solaris 11. Note that the last update in the screen shot is the Solaris 11 update; for details on any of the downloads, place your mouse over the information icon under the details column for a pop-up text region. Select the software to download and click the Next button to display the Ops Center license agreement. Review and click the check box to accept the license agreement, then click the Next button to begin downloading the software. The status screen shows the current download status. If desired, you can perform the downloads as a background job. Simply click the check box, then click the next button to proceed to the summary screen. The summary screen shows the updates to be downloaded as well as the current status. Clicking the Finish button will close the dialog and return to the Browser UI. The download job will continue to run in Ops Center and progress can still be viewed from the jobs menu at the bottom of the browser window. Step 2: Check the Version of Existing Agent Controllers After the download job completes, you can check the availability of agent updates as well as the current versions of your Agent Controllers from the left-hand Assets navigation tab. Select “Operating Systems” from the pull-down tab lets to display only OS assets. Next, select “Solaris” in the left-hand tab to display the Solaris assets. Finally, select the Summary tab in the center display panel to show which versions of agent controllers are installed in your data center. Notice that a few of the OS assets are not displayed in the Agent Controllers tab. Ops Center will not display OS instances which do not have an Agent Controller installation. This includes Enterprise Controllers and Proxy Controllers (unless the agent has been activated on the OS instance) and and OS instances using agentless management. For Agent Controllers which support an update, the version of agent software (in this example, 2083) appears to the right of the currently installed version. Step 3: Upgrade Your Agent Controllers If desired, you can upgrade agent controllers from the previous screen by selecting the desired systems and clicking the upgrade button. Alternatively, you can click the link “Upgrade All Agent Controllers” in the right-hand Actions menu: In either case, a pop-up dialog lets you start the upgrade process. The first screen in the dialog lets you choose the upgrade method: Ops Center provides three ways to upgrade agent controllers: Automatic Upgrade: If Agent Controllers are running on all assets, Ops Center can automatically upgrade the software to the latest version without requiring any login credentials to the system SSH using a single set of credentials: If all assets use the same login credentials, you can apply a single set to all assets for the upgrade process. The log-in credentials are the same ones used for asset discovery and management, which are stored in the Plan Management navigation tab under Credentials. SSH using individual credentials: If assets use different login credentials, you can select a different set for each asset. After selecting the upgrade method, click the Next button to proceed to the summary screen. Click the Finish button to close the pop-up dialog and start the upgrade job for the agent controllers. The upgrade job runs a series of tasks in parallel, and will upgrade all agents which have been selected. Once the job completes, the OS instances in your data center will be upgraded and running the latest version of Agent Controller software.

  Read the article

• What to do after a servicing fails on TFS 2010

  - by Martin Hinshelwood

  What do you do if you run a couple of hotfixes against your TFS 2010 server and you start to see seem odd behaviour? A customer of mine encountered that very problem, but they could not just, or at least not easily, go back a version.   You see, around the time of the TFS 2010 launch this company decided to upgrade their entire 250+ development team from TFS 2008 to TFS 2010. They encountered a few problems, owing mainly to the size of their TFS deployment, and the way they were using TFS. They were not doing anything wrong, but when you have the largest deployment of TFS outside of Microsoft you tend to run into problems that most people will never encounter. We are talking half a terabyte of source control in TFS with over 80 proxy servers. Its certainly the largest deployment I have ever heard of. When they did their upgrade way back in April, they found two major flaws in the product that meant that they had to back out of the upgrade and wait for a couple of hotfixes. KB983504 – Hotfix KB983578 – Patch KB2401992 -Hotfix In the time since they got the hotfixes they have run 6 successful trial migrations, but we are not talking minutes or hours here. When you have 400+ GB of data it takes time to copy it around. It takes time to do the upgrade and it takes time to do a backup. Well, last week it was crunch time with their developers off for Christmas they had a window of opportunity to complete the upgrade. Now these guys are good, but they wanted Northwest Cadence to be available “just in case”. They did not expect any problems as they already had 6 successful trial upgrades. The problems surfaced around 20 hours in after the first set of hotfixes had been applied. The new Team Project Collection, the only thing of importance, had disappeared from the Team Foundation Server Administration console. The collection would not reattach either. It would not even list the new collection as attachable! Figure: We know there is a database there, but it does not This was a dire situation as 20+ hours to repeat would leave the customer over time with 250+ developers sitting around doing nothing. We tried everything, and then we stumbled upon the command of last resort. TFSConfig Recover /ConfigurationDB:SQLServer\InstanceName;TFS_ConfigurationDBName /CollectionDB:SQLServer\instanceName;"Collection Name" -http://msdn.microsoft.com/en-us/library/ff407077.aspx WARNING: Never run this command! Now this command does something a little nasty. It assumes that there really should not be anything wrong and sets about fixing it. It ignores any servicing levels in the Team Project Collection database and forcibly applies the latest version of the schema. I am sure you can imagine the types of problems this may cause when the schema is updated leaving the data behind. That said, as far as we could see this collection looked good, and we were even able to find and attach the team project collection to the Configuration database. Figure: After attaching the TPC it enters a servicing mode After reattaching the team project collection we found the message “Re-Attaching”. Well, fair enough that sounds like something that may need to happen, and after checking that there was disk IO we left it to it. 14+ hours later, it was still not done so the customer raised a priority support call with MSFT and an engineer helped them out. Figure: Everything looks good, it is just offline. Tip: Did you know that these logs are not represented in the ~/Logs/* folder until they are opened once? The engineer dug around a bit and listened to our situation. He knew that we had run the dreaded “tfsconfig restore”, but was not phased. Figure: This message looks suspiciously like the wrong servicing version As it turns out, the servicing version was slightly out of sync with the schema. KB Schema Successful           KB983504 341 Yes   KB983578 344 sort of   KB2401992 360 nope   Figure: KB, Schema table with notation to its success The Schema version above represents the final end of run version for that hotfix or patch. The only way forward The problem was that the version was somewhere between 341 and 344. This is not a nice place to be in and the engineer give us the  only way forward as the removal of the servicing number from the database so that the re-attach process would apply the latest schema. if his sounds a little like the “tfsconfig recover” command then you are exactly right. Figure: Sneakily changing that 3 to a 1 should do the trick Figure: Changing the status and dropping the version should do it Now that we have done that we should be able to safely reattach and enable the Team Project Collection. Figure: The TPC is now all attached and running You may think that this is the end of the story, but it is not. After a while of mulling and seeking expert advice we came to the opinion that the database was, for want of a better term, “hosed”. There could well be orphaned data in there and the likelihood that we would have problems later down the line is pretty high. We contacted the customer back and made them aware that in all likelihood the repaired database was more like a “cut and shut” than anything else, and at the first sign of trouble later down the line was likely to split in two. So with 40+ hours invested in getting this new database ready the customer threw it away and started again. What would you do? Would you take the “cut and shut” to production and hope for the best?

  Read the article

• Specs, Form and Function – What am I Missing?

  - by Barry Shulam

  0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

  Read the article

• YouTube Scalability Lessons

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }h2 { margin: 12pt 0cm 3pt; page-break-after: avoid; font-size: 14pt; font-family: "Times New Roman"; font-style: italic; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.Heading2Char { font-family: Calibri; font-weight: bold; font-style: italic; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Very interesting blog post by Todd Hoff at highscalability.com presenting “7 Years of YouTube Scalability Lessons in 30 min” based on a presentation from Mike Solomon, one of the original engineers at YouTube: …. The key takeaway away of the talk for me was doing a lot with really simple tools. While many teams are moving on to more complex ecosystems, YouTube really does keep it simple. They program primarily in Python, use MySQL as their database, they’ve stuck with Apache, and even new features for such a massive site start as a very simple Python program. That doesn’t mean YouTube doesn’t do cool stuff, they do, but what makes everything work together is more a philosophy or a way of doing things than technological hocus pocus. What made YouTube into one of the world’s largest websites? Read on and see... Stats @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } 4 billion Views a day 60 hours of video is uploaded every minute 350+ million devices are YouTube enabled Revenue double in 2010 The number of videos has gone up 9 orders of magnitude and the number of developers has only gone up two orders of magnitude. 1 million lines of Python code Stack @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Python - most of the lines of code for YouTube are still in Python. Everytime you watch a YouTube video you are executing a bunch of Python code. Apache - when you think you need to get rid of it, you don’t. Apache is a real rockstar technology at YouTube because they keep it simple. Every request goes through Apache. Linux - the benefit of Linux is there’s always a way to get in and see how your system is behaving. No matter how bad your app is behaving, you can take a look at it with Linux tools like strace and tcpdump. MySQL - is used a lot. When you watch a video you are getting data from MySQL. Sometime it’s used a relational database or a blob store. It’s about tuning and making choices about how you organize your data. Vitess- a  new project released by YouTube, written in Go, it’s a frontend to MySQL. It does a lot of optimization on the fly, it rewrites queries and acts as a proxy. Currently it serves every YouTube database request. It’s RPC based. Zookeeper - a distributed lock server. It’s used for configuration. Really interesting piece of technology. Hard to use correctly so read the manual Wiseguy - a CGI servlet container. Spitfire - a templating system. It has an abstract syntax tree that let’s them do transformations to make things go faster. Serialization formats - no matter which one you use, they are all expensive. Measure. Don’t use pickle. Not a good choice. Found protocol buffers slow. They wrote their own BSON implementation, which is 10-15 time faster than the one you can download. ...Contiues. Read the blog Watch the video

  Read the article

• Clone a VirtualBox Machine

  I just installed VirtualBox, which I want to try out based on recommendations from peers for running a server from within my Windows 7 x64 OS.  Ive never used VirtualBox, so Im certainly no expert at it, but I did want to share my experience with it thus far.  Specifically, my intention is to create a couple of virtual machines.  One I intend to use as a build server, for which a virtual machine makes sense because I can easily move it around as needed if there are hardware issues (its worth noting my need for setting up a build server at the moment is a result of a disk failure on the old build server).  The other VM I want to set up will act as a proxy server for the issue tracking system were using at Code Project, Axosoft OnTime.  They have a Remote Server application for this purpose, and since the OnTime install is 300 miles away from my location, the Remote Server should speed up my use of the OnTime client by limiting the chattiness with the database (at least, thats the hope). So, I need two VMs, and Im lazy.  I dont want to have to install the OS and such twice.  No problem, it should be simple to clone a virtualbox machine, or clone a virtualbox hard drive, right?  Well unfortunately, if you look at the UI for VirtualBox, theres no such command.  Youre left wondering How do I clone a VirtualBox machine? or the slightly related How do I clone a VirtualBox hard drive? If youve used VirtualPC, then you know that its actually pretty easy to copy and move around those VMs.  Not quite so easy with VirtualBox.  Finding the files is easy, theyre located in your user folder within the .VirtualBox folder (possibly within a HardDisks folder).  The disks have a .vdi extension and will be pretty large if youve installed anything.  The one shown here has just Windows Server 2008 R2 installed on it nothing else. If you copy the .vdi file and rename it, you can use the Virtual Media Manager to view it and you can create a new machine and choose the new drive to attach to.  Unfortunately, if you simply make a copy of the drive, this wont work and youll get an error that says something to the effect of: Cannot register the hard disk PATH with UUID {id goes here} because a hard disk PATH2 with UUID {same id goes here} already exists in the media registry (PATH to XML file). There are command line tools you can use to do this in a way that avoids this error.  Specifically, the c:\Program File\Sun\VirtualBox\VBoxManage.exe program is used for all command line access to VirtualBox, and to copy a virtual disk (.vdi file) you would call something like this: VBoxManage clonehd Disk1.vdi Disk1_Copy.vdi However, in my case this didnt work.  I got basically the same error I showed above, along with some debug information for line 628 of VBoxManageDisk.cpp.  As my main task was not to debug the C++ code used to write VirtualBox, I continued looking for a simple way to clone a virtual drive.  I found it in this blog post. The Secret setvdiuuid Command VBoxManage has a whole bunch of commands you can use with it just pass it /? to see the list.  However, it also has a special command called internalcommands that opens up access to even more commands.  The one thats interesting for us here is the setvdiuuid command.  By calling this command and passing in the file path to your vdi file, it will reset the UUID to a new (random, apparently) UUID.  This then allows the virtual media manager to cope with the file, and lets you set up new machines that reference the newly UUIDd virtual drive.  The full command line would be: VBoxManage internalcommands setvdiuuid MyCopy.vdi The following screenshot shows the error when trying clonehd as well as the successful use of setvdiuuid. Summary Now that I can clone machines easily, its a simple matter to set up base builds of any OS I might need, and then fork from there as needed.  Hopefully the GUI for VirtualBox will be improved to include better support for copying machines/disks, as this is Im sure a very common scenario. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Trouble with Samba Domain

  - by Arkevius

  I'm having a bit of trouble setting up this Samba domain correctly. I'm getting an Access Denied error when trying to add a Windows XP machine to the domain. I'll go through my scenario in detail, but for those of you wanting a TLDR summary it'll be at the bottom of this post. I have HP Proliant server with Ubuntu 12.04 LTS installed. For this particular environment, I need this server to act as a PDC, file server, and print server. I began by updating and upgrading the packages (of course). Then went to install samba, gnome-desktop, wine, and cpanm. Samba was, of course, for the PDC and file/print services. The GUI was needed because a certain software has to be installed on there that needs a GUI. Wine was needed because the software is Windows-native. And cpanm was for a perl script I have running. For Samba, I went into the smb.conf file and enabled domain logons, changed the workgroup/domain name, the logon script for a per-group basis (netlogon/%g), enabled the netlogon and profiles share, and setup a couple of custom shares for the file service. The printer was added later, and seems to be working just fine. I then restarted the services, and used the net groupmap command to ensure my unix groups were mapped correctly to the Windows groups. After this, I went to a Windows box, and was able to successfully join the domain without a problem. After some fidgeting with the software to get it running on the win boxes from the server (it's a records management system program, which stores it's database files on the server), I went to add another computer to the domain. But now it's saying Access Denied. Before when I had this trouble it was because I forgot to add the group "machines" so Samba could create machine accounts. Thinking this was the case, I manually created the machine account to test this theory. However, it would still give me an Access Denied error. That must mean it has something to do with permissions now, correct? I've been fighting with this server for the past two weeks. If it's not one thing that;s wrong, then it's something else completely different. This would be the third time I've actually reinstalled everything to start over. I'll post snippets of my system settings below. If anything else is needed, just say the word and I'll gather up the info. The unix group 'domadmin' is the Domain Admins group. Samba Administrator account administrator:x:1000:1000:Administrator,,,:/home/administrator:/bin/bash Adminstrator's groups administrator adm cdrom sudo dip plugdev lpadmin sambashare domadmin crimestar Samba's Configuration FIle (a snippet anyways) [global] workgroup = CITYPD server string = BPDServer dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user domain logons = yes logon path = \\%L\srv\samba\profiles\%U logon script = logon.bat add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u domain master = yes usershare allow guests = yes [netlogon] comment = Network Logon Service path = /srv/samba/netlogon/%g guest ok = yes read only = yes browseable = no [profiles] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no write list = root, @lpadmin [crimestar] comment = "Crimestar DB" path = /srv/crimestar/db valid users = @domadmin, @crimestar admin users = administrator writeable = yes guest ok = no browseable = no create mask = 0666 directory mask = 0777 [crimestarfiles] path = /home/administrator/.wine/drive_c/crimestar admin users = administrator browseable = yes ls -la on /srv/samba/profiles drwxrwxrwx 2 root machines 4096 Nov 21 15:27 . drwxr-xr-x 4 root root 4096 Nov 21 15:28 .. ls -la on /srv/samba/netlogon drwxr-xr-x 6 root root 4096 Nov 21 15:30 . drwxr-xr-x 4 root root 4096 Nov 21 15:28 .. drwxr-xr-x 2 root root 4096 Nov 21 15:30 crimestar drwxr-xr-x 2 root root 4096 Nov 21 18:13 domadmin drwxr-xr-x 3 root root 4096 Nov 21 15:30 guests drwxr-xr-x 2 root root 4096 Nov 21 15:29 users GrouMap list Domain Users (S-1-5-21-2978508755-2341913247-928297747-513) -> users Domain Admins (S-1-5-21-2978508755-2341913247-928297747-512) -> domadmin Domain Guests (S-1-5-21-2978508755-2341913247-928297747-514) -> nogroup TLDR I'm getting an Access Denied error message while trying to join a windows box to a samba domain, even after I successfully joined another computer without a problem. System settings / files are quoted above. Anyone have any ideas or suggestions?

  Read the article

• Data Source Security Part 2

  - by Steve Felts

  In Part 1, I introduced the default security behavior and listed the various options available to change that behavior.  One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values.   The direct use of database credentials is relatively new to WLS, based on customer feedback.  Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password).  By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source.  If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used.  Because of this defaulting mechanism, you should be careful what permissions are granted to the default user.  Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user.  In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New.  2) Second, create the mapping.  In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead.  For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call.  Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source.  For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request.  It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source.  This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map.  Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map.  This is enabled by setting the “use-database-credentials” to true.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations.  When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0).  Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”.  The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used.  If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used.  If you specify a user/password when getting a connection, that user will be used for the credentials.  WLS users are not involved at all in the data source connection process.

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >