Search Results

Search found 8999 results on 360 pages for 'core i7'.

Page 159/360 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• How to setup a static multicast ARP entry with Cisco SG300?

  - by Fredrik Hedberg

  We're running a Microsoft NLB cluster in multicast mode as a loadbalancer. Using our old Cisco IOS switches we propagate access to the cluster to our branches using a static ARP entry in the core router: arp 10.20.1.226 03bf.0a14.01e2 ARPA But how does one solve this using non-IOS based Cisco hardware such as the SG300 series? Adding a static ARP entry results in an error message telling the user that the hardware address needs to be a valid unicast MAC address.

  Read the article

• ESXI Crash need help to understand log and support about nexentastor on virtual machine

  - by Bgnt44

  If i understand right, the following core dump means that the cpu4 has crashed the Host if i read the next line it seem that at the time the CPU 4 was assigned to the NexentaStore Vm ... SO if im right i can say that NexentaStor Vm crash my esxi Am i right ? Does that core dump can provide me some more informations ? 2012-11-14T03:48:01.046Z cpu4:6089)0x41221f25ba08:[0x41803007abff]PanicvPanicInt@vmkernel#nover+0x56 stack: 0x3000000008, 0x41221f25ba 2012-11-14T03:48:01.046Z cpu4:6089)0x41221f25bae8:[0x41803007b4a7]Panic@vmkernel#nover+0xae stack: 0x2e067c00000010, 0x0, 0x1f25bb38, 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25bc18:[0x4180300a7823]TLBDoInvalidate@vmkernel#nover+0x45a stack: 0xca, 0x0, 0x0, 0x0, 0x0 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25bc68:[0x418030489e17]UserMem_CartelFlush@<None>#<None>+0xce stack: 0xcaa0b, 0x0, 0x0, 0x4 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25bd78:[0x41803048ab91]UserMemUnmapStateCleanup@<None>#<None>+0x58 stack: 0x0, 0x41221f25bd 2012-11-14T03:48:01.047Z cpu4:6089)0x41221f25be58:[0x41803048b97d]UserMemUnmap@<None>#<None>+0x104 stack: 0x41221f267000, 0x41221f25bf 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25be98:[0x41803048bf20]UserMem_Unmap@<None>#<None>+0xe3 stack: 0x426, 0x0, 0x41221f25bef8, 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25beb8:[0x4180304a5985]UW64VMKSyscallUnpackReleasePhysMemMap@<None>#<None>+0x18 stack: 0x10 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25bef8:[0x418030476791]User_LinuxSyscallHandler@<None>#<None>+0x17c stack: 0x41803004cc70, 2012-11-14T03:48:01.048Z cpu4:6089)0x41221f25bf18:[0x4180300a82be]User_LinuxSyscallHandler@vmkernel#nover+0x19 stack: 0x3ffe63bed80, 0 2012-11-14T03:48:01.049Z cpu4:6089)0x41221f25bf28:[0x418030110064]gate_entry@vmkernel#nover+0x63 stack: 0x10b, 0x0, 0x0, 0x426, 0xcf76 2012-11-14T03:48:01.049Z cpu4:6089)VMware ESXi 5.1.0 [Releasebuild-799733 x86_64] PCPU 1 locked up. Failed to ack TLB invalidate (total of 1 locked up, PCPU(s): 1). 2012-11-14T03:48:01.050Z cpu4:6089)cr0=0x80010031 cr2=0xcaa0b750 cr3=0x197d7b000 cr4=0x42768 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:0 world:6111 name:"vmm0:Windows_2012_-_SQL" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:1 world:6032 name:"vmm0:Windows_2012_-_AD" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:2 world:6098 name:"vmm0:Windows_2012_-_App" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:3 world:4099 name:"idle3" (IS) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:4 world:6089 name:"vmx-vcpu-0:NexentaStor" (U) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:5 world:6134 name:"vmm0:Ubuntu_-_NGINX" (V) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:6 world:4102 name:"idle6" (IS) 2012-11-14T03:48:01.050Z cpu4:6089)pcpu:7 world:4103 name:"idle7" (IS) 2012-11-14T03:48:01.050Z cpu4:6089)@BlueScreen: PCPU 1 locked up. Failed to ack TLB invalidate (total of 1 locked up, PCPU(s): 1).

  Read the article

• ACPI Throttling in Ubuntu

  - by Evan

  I'm looking to throttle my cpu through the ACPI. I've read up on it, but I keep receiving permission denied statements. I have 8 available throttling states. Here are the outcomes of my atttempts: evan@evan-laptop:/proc/acpi/processor/CPU0$ echo 3 /proc/acpi/processor/CPU0/throttling bash: /proc/acpi/processor/CPU0/throttling: Permission denied evan@evan-laptop:/proc/acpi/processor/CPU0$ sudo echo 3 /proc/acpi/processor/CPU0/throttling bash: /proc/acpi/processor/CPU0/throttling: Permission denied EDIT: For reference, I am running Ubuntu Karmic with Intel Core Duo T2500 with ACPI enabled

  Read the article

• Virtual PC on Windows 7 - Hardware-assisted virtualization is disabled

  - by DLux

  I am running a Lenovo Thinkpad T61 with an Intel Core 2 Duo T7300 processor. When I run Virtual PC in Windows 7, I get the following error: Unable to start Windows Virtual PC because hardware-assisted virtualization is disabled. When running the Hardware-Assisted Virtualization Detection Tool from Microsoft says: Hardware-assited virtualization is not enabled on this computer. Now, in the BIOS, I do have virtualization enabled and according to Intel this processor supports Intel-VT. What am I missing here?

  Read the article

• 500 internal server error on certain page after a few hours

  - by Brian Leach

  I am getting a 500 Internal Server Error on a certain page of my site after a few hours of being up. I restart uWSGI instance with uwsgi --ini /home/metheuser/webapps/ers_portal/ers_portal_uwsgi.ini and it works again for a few hours. The rest of the site seems to be working. When I navigate to my_table, I am directed to the login page. But, I get the 500 error on my table page on login. I followed the instructions here to set up my nginx and uwsgi configs. That is, I have ers_portal_nginx.conf located i my app folder that is symlinked to /etc/nginx/conf.d/. I start my uWSGI "instance" (not sure what exactly to call it) in a Screen instance as mentioned above, with the .ini file located in my app folder My ers_portal_nginx.conf: server { listen 80; server_name www.mydomain.com; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/home/metheuser/webapps/ers_portal/run_web_uwsgi.sock; } } My ers_portal_uwsgi.ini: [uwsgi] #user info uid = metheuser gid = ers_group #application's base folder base = /home/metheuser/webapps/ers_portal #python module to import app = run_web module = %(app) home = %(base)/ers_portal_venv pythonpath = %(base) #socket file's location socket = /home/metheuser/webapps/ers_portal/%n.sock #permissions for the socket file chmod-socket = 666 #uwsgi varible only, does not relate to your flask application callable = app #location of log files logto = /home/metheuser/webapps/ers_portal/logs/%n.log Relevant parts of my views.py data_modification_time = None data = None def reload_data(): global data_modification_time, data, sites, column_names filename = '/home/metheuser/webapps/ers_portal/app/static/' + ec.dd_filename mtime = os.stat(filename).st_mtime if data_modification_time != mtime: data_modification_time = mtime with open(filename) as f: data = pickle.load(f) return data @a bunch of authentication stuff... @app.route('/') @app.route('/index') def index(): return render_template("index.html", title = 'Main',) @app.route('/login', methods = ['GET', 'POST']) def login(): login stuff... @app.route('/my_table') @login_required def my_table(): print 'trying to access data table...' data = reload_data() return render_template("my_table.html", title = "Rundata Viewer", sts = sites, cn = column_names, data = data) # dictionary of data I installed nginx via yum as described here (yesterday) I am using uWSGI installed in my venv via pip I am on CentOS 6 My uwsgi log shows: Wed Jun 11 17:20:01 2014 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 287] during GET /whm-server-status (127.0.0.1) IOError: write error [pid: 9586|app: 0|req: 135/135] 127.0.0.1 () {24 vars in 292 bytes} [Wed Jun 11 17:20:01 2014] GET /whm-server-status => generated 0 bytes in 3 msecs (HTTP/1.0 404) 2 headers in 0 bytes (0 switches on core 0) When its working, the print statement in the views "my_table" route prints into the log file. But not once it stops working. Any ideas?

  Read the article

• IIS on localhost is very slow

  - by Nyla Pareska

  I am using IIS7 on Windows Vista dual core cpu. The first time hit on a WCF service or an ASP.NET webform sometimes takes way longer than a minute which is not really acceptable for me. I configured the application to use the Classic .NET application pool and tried playing with the Maximum worker processes, first setting it to 4 but put it back to 1 as it did not have the expected result. Are there any other things that I can try?

  Read the article

• How to make 7zip faster

  - by user34463

  I normally use winRAR over 7Zip simply because its faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7zip and winRAR default settings on their normal compression and their best compression, and in a lot of cases winRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7zip speed up? I'd like it to at least be on par with rar's speed Is there a way to make recovery segments in 7zip like you can in rar? I didn't see any, but I guess it could be a command line thing. I tested winrar and 7zip using the latest stable version of each (4.something with 7zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core intel i7 720 (1.6ghz)/(2.8ghz) with 4gb DDR3 ram, and the 64-bit version of 7zip.

  Read the article

• Computer wont install Windows Vista or Windows 7

  - by AsheeVee

  I had Windows Vista on my computer and wanted to upgrade to Windows 7 and thought that I would format my computer since it had been awhile. When I installed Windows 7 it wouldnt let me it would go through all the installation and then when my computer rebooted it would just be black screen with my mouse, I have tried mulitpule times now, and have just gone backs to Windows Vista, this no longer works and does the same thing as when I tried to insta I have a Nvidia GTX 275 video card, ASUS m2N-E SLI mother board,and a AMD 5200 Dual core processor

  Read the article

• Problem virtualizing Ubuntu 10.04 32 bit on VirtualBox 3.1 on Windows Vista 64 bit

  - by Adam Siddhi

  Software & Hardware Setup Host System : Windows Vista Home Premium SP1 64 bit Guest : Ubuntu 10.04 (ubuntu-10.04-desktop-i386.iso) 32 bit VM : VirtualBox 3.1.8 Hardware : Intel Core 2 Duo T6400 4GB SDRAM What Happened I followed the tutorial called Installing Ubuntu inside Windows using VirtualBox located here: www.psychocats.net/ubuntu/virtualbox At first I downloaded ubuntu-10.04-desktop-amd64.iso because I figured that it would be a perfect fit with my Vista 64 OS. I was wrong because it turns out the my Intel Core 2 Duo T6400 CPU does not have Intel® Virtualization Technology. So I had to go with the ubuntu-10.04-desktop-i386.iso which is 32 bit. This got me to the point where I could actually create the Ubuntu VM. So I set up the VM in VirtualBox (according to the tutorial I was following) to prepare for the Ubuntu 10.04 virtualization. Please go to my Picassa web album to see the screen shots of my VM settings and Ubuntu boot process so you can see what I experienced (they appear in the order that I experienced them in). www.picasaweb.google.com/rubysiddhi/ProblemVirtualizingUbuntu100432BitOnVirtualBox31OnWindowsVista64# The first 17 images show the VM settings. The last 8 show my attempt at virtualizing Ubuntu 10.04. You can see booting up but ultimately failing. The Specifics The one error message I got was: (process:210): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) It appeared on a black screen that sort of looked like a Windows console screen but with out the c:\ or the ability to type. Then this error message got more complex when tons of text appeared in the screen. Pictures 23 - 25 in the album show this text. I should also mention that I found this post in the Ubuntu forums by zonination who seemed to have similar problems to mine even though they had a different set up. The main issue I think zonination and me may be having is the fact that we can not change the color mode to 32 bit while it is booting. I think the 16 bit color mode maybe making Ubuntu fail. Not certain though. Well I hope I explained my problem thoroughly and clearly. Thanks for the tutorial. It got me started but, now I hope to finish this process so I can start developing in Ubuntu. OH by the way if you want to actually see what happened play by play (with some classical in the background) check out the video I made over here: http://www.youtube.com/watch?v=XMbbm5E_0Xw Thanks! Regards, Adam

  Read the article

• Windows Server 2008 R2 vs Windows 7 Ultimate

  - by Techeretic

  I have a Dual Core Intel CPU E7200, 4 GB RAM, and a NvIDIA 8600 GT for graphics and 500GB HDD. This configuration runs Windows 7 Ultimate very smoothly, but now I recently signed up to the MS WebSiteSpark programme and have downloaded the Windows Server 2008 R2. So my question is whether I can use the Server Edition for my day to day use, play games, etc etc?? I want to install the Server OS to monitor my Home Network and also for some web development I have been trying out lately.

  Read the article

• What is the § ± key for on Mac keyboards?

  - by Pat Wallace

  Apple's keyboards have a new key, with § and ± symbols on it. Can somebody tell me what these keys are for, and where I should use them? I am aware the symbols have mathematical uses, but I assume they must do something important as well to be on the core keyboard. Or are they just the 'Scroll Lock' of the Apple world?

  Read the article

• How to make sysctl network bridge settings persist after a reboot?

  - by user183394

  I am setting up a notebook for software demo purpose. The machine has 8GB RAM, a Core i7 Intel CPU, a 128GB SSD, and runs Ubuntu 12.04 LTS 64bit. The notebook is used as a KVM host and runs a few KVM guests. All such guests use the virbr0 default bridge. To enable them to communicate with each other using multicast, I added the following to the host's /etc/sysctl.conf, as shown below net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Afterwards, following man sysctl(8), I issued the following: sudo /sbin/sysctl -p /etc/sysctl.conf My understanding is that this should make these settings persist over reboots. I tested it, and was surprised to find out the following: root@sdn1 :/proc/sys/net/bridge# more *tables :::::::::::::: bridge-nf-call-arptables :::::::::::::: 1 :::::::::::::: bridge-nf-call-ip6tables :::::::::::::: 1 :::::::::::::: bridge-nf-call-iptables :::::::::::::: 1 All defaults are coming back! Yes. I can use some kludgy "get arounds" such as putting a /sbin/sysctl -p /etc/sysctl.conf into the host's /etc/rc.local but I would rather "do it right". Did I misunderstand the man page or is there something that I missed? Thanks for any hints. -- Zack

  Read the article

• Low Profile AMD Cooling

  - by J. T.

  I have a few setups where I can mount two motherboards on top of each other. They are running AMD Athlon 64 x2 dual core 4200 CPU's using a very low profile CPU cooler. These coolers are loud and annoying. Does anyone know of a low profile QUIET CPU cooling solution?

  Read the article

• Capacity Planning IIS6

  - by user45457

  Hello, I am planning to host 5000 site with separate application pool. Based on my estimate there are around 1600- 2000 worker process will be running on the server. So my question is: Is is possible to host 5000 sites on a server with IIS 6. Server Configuration: 16 Core @ 2.27 Ghz CPU 8 GB RAM Please tell me if u require any other information. Kartik

  Read the article

• Developer's PC - worth getting more than 8GB RAM?

  - by Borek

  I'm building a developer PC and am wondering whether to get 8GB or 12GB. It's a Core-i7 860 system, i.e., 1156 motherboards with 4 slots for RAM sticks, dual channel, usually up 16GB (as opposed to 1366 sockets where 6 banks / triple-channel are used). 8GB would be cheaper to get especially because price per GB is lower with 4x2GB compared to 2x4GB. Also the availability is worse for 4GB DIMMs here where I live; those are the main practical advantages of 8GB. (Edit: I should have stressed the price difference more - in the eshop I'm buying from, the difference between 12GB and 8GB is so big that I could almost buy a whole new netbook for it.) However, I understand that more RAM can never do harm which is the point of this question - how much of a difference will 12GB make as opposed to 8GB? Honestly, I've always been on 3.2GB systems (4GB but 32bit system) and never felt much pain from having too little memory - of course there could be more but for instance compiler's performance was usually held back by slow I/O or not utilizing multiple cores on my CPU. Still, I'm not questioning that 8GB will be useful, however, I'm not sure about the additional 4GB difference between 8 and 12 gig. Anyone has experience with 8GB / 12GB systems? The software I usually run all the time: Visual Studio or Eclipse (both should be fine with ~2GB RAM, after that I feel their performance is I/O bound) Firefox (it can never have enough RAM can it? :) Office (~500MB RAM should be enough) ... and then some smaller apps like Skype, other browsers, some background services etc.

  Read the article

• Full screen flash lags on Windows 7

  - by Chmod

  I have been experiencing an issue since I've up upgraded to Windows 7 where all flash videos have horrible frame rates when run in full screen mode. I have tried multiple browsers and i have the latest version of flash and video drivers. I have tried re-installing flash and disabling hardware acceleration. The problem occurs on youtube and hulu. This is a clean install on a Core 2 duo with 4GB RAM and an Nvidia 8400M GS.

  Read the article

• Win7 Pro x64 task manager hangs when restarting explorer.exe after waking from sleep

  - by Brandon Dybala

  I have a desktop running Windows 7 x64 Pro, set for Hybrid Sleep on a wired network. Wakeup is only enabled from the keyboard (wake on mouse and Wake-On-LAN are both disabled). Sometimes when it wakes up, there is no network connectivity. The notification area icons for both network and volume don't respond to clicks. If I open the Network and Sharing Center, clicking the red X doesn't do anything. Restarting does fix the problem, but I'm looking for a solution that does not require restarting (if at all possible). Drivers are all up to date. I've tried opening Task Manager and restarting the explorer.exe process, but Task Manager freezes for a few minutes, the "New Task" dialog closes, and explorer.exe has not restarted. CPU and memory usage are both normal. One thread suggested making sure the BIOS was set for S3 sleep mode only (not S1 or S1 & S3), but I haven't checked this yet. Going back to sleep and waking back up does not help. So far only a reboot has fixed the issue. System specs: Windows 7 x64 Pro Asus P8Z68-V PRO/GEN3 128 GB Crucial m4 SSD (Firmware version 0309) Intel Core i7 2600 3.4 GHz 16 GB RAM Any ideas? Brandon

  Read the article

• Visual Studio 2012 Very Slow Typing

  - by DaoCacao

  I have a problem. After SP1 update, passing some time, VS 2012 becomes very-very slow when typing text. Solution size is not big, PC is quite powerful, it has 16GB of RAM, SSD drive, and i7-2600. I have attached using another VS and I see in debugger a lot of exceptions: First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC (KernelBase.dll) in devenv.exe: 0xE0434352 (parameters: 0x80131509, 0x00000000, 0x00000000, 0x00000000, 0x64BF0000). First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC (KernelBase.dll) in devenv.exe: 0xE0434352 (parameters: 0x80131509, 0x00000000, 0x00000000, 0x00000000, 0x64BF0000). The thread 0x288c has exited with code 0 (0x0). Anyone have any ideas on what CVcsException is? Googling it gives almost nothing. How do I get rid of this problem?

  Read the article

• How to detect brute force in mod-security

  - by Wingless-Archangel

  I checked the core rules set in the mod-security but it's didn't contain the rules related to Brute-Force Attack!!! Did anyone know how to write the rules or the existing rules for this kind of Attack! Thanks in advanced,

  Read the article

• MariaDB doesn't upgrade, 2 versions are installed

  - by zahorak

  I have a server running on Debian wheezy with MaraiDB and OwnCloud. Few days ago, I wanted to update the packages because of the OwnCloud updates but something went wrong. Usually in this case I'd probably try to remove and again install the problematic packages, but on a server which is used by different people it doesn't seem like a valid solution anymore. Here you can see my console output: user@server:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libmariadbclient18 : Depends: libmysqlclient18 (= 10.0.4+maria-1~wheezy) but 10.0.5+maria-1~wheezy is installed libmysqlclient18 : Depends: libmariadbclient18 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server : Depends: mariadb-server-10.0 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed E: Unmet dependencies. Try using -f. user@server:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be upgraded: libmariadbclient18 mariadb-server-10.0 owncloud 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 7 not fully installed or removed. Need to get 0 B/37.2 MB of archives. After this operation, 3,565 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Preconfiguring packages ... (Reading database ... 35901 files and directories currently installed.) Preparing to replace libmariadbclient18 10.0.4+maria-1~wheezy (using .../libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb) ... Unpacking replacement libmariadbclient18 ... dpkg: error processing /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb (--unpack): trying to overwrite '/usr/lib/mysql/plugin/dialog.so', which is also in package mariadb-server-10.0 10.0.4+maria-1~wheezy Errors were encountered while processing: /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I tried removing the 10.0.4 package version of libmariadbclient18 but I wasn't really successful in doing that. So my last hope is here, do you have any ideas how exactly I could fix this issue? Thx very much

  Read the article

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

  - by Troggy

  Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

  Read the article

• Laptop choice for development: MacBook Pro 17 vs Dell Studio XPS 16 vs HP Envy 15

  - by Shalan

  Hey! First things first - let me state that I am not intending to play games on this - I have narrowed down to these 3 purely based on specs and its individual brand reliability in the market. I intend to primarily use: Visual Studio 2008 Pro a lot (develop and deploy on Windows platforms) SQL Server 2005 Oracle 10g Adobe Photoshop CS4 Microsoft Expression Studio Google Sketchup I currently use a desktop PC (Core2Duo 2.66Ghz with 3GB DDRII memory) running Vista Business 32-bit - and I have to admit that, especially for Visual Studio, its quite sluggish to a point where it affects productivity. Furthermore, I intend to only use the notebook on a table - with a cooled surface, like granite :) - so I would appreciate people's input with regard to heat issues. Im aware that the Dell's primary exhaust gets blocked by the lid when open, but some reviews don't seem to place extraordinary emphasis on heat issues resulting from this. My options for the Dell/Alienware: Core i7 720QM 4GB DDRIII memory ATI mobility 3670 (512) 128GB Solid State Drive 16-inch Full HD RGB-LED LCD display (1080p) 3-year next-business-day support My configuration for the Apple MBP: Core2Duo 2.8Ghz (Im assuming the T9600) 4GB DDRIII memory 128GB Solid State Drive standard 1 year support The one advantage I think of with the MBP is that I can have the addition of OSX (though Im unsure what I would use it for, but purely to play around with a much-boasted-about OS) What are your thoughts on this, especially regarding build-quality, heat, performance and battery-life? Much thanks! ~shalan

  Read the article

• Win 7 running slowly with low CPU usage and memory

  - by guywhoneedsahand

  I have a relatively new (under 2 yrs old) windows 7 machine. It has 9GB of RAM, and an i7 core CPU (930 @ 2.8GHz w/ 8 CPUs). After about 8 months since a clean install, I noticed my computer was running slowly. I figure it was fragmentation etc, and I did a complete wipe & clean reinstall. However, my problems are somehow persisting. The computer is running painfully slowly (but in leaps and bounds - sometimes it will work fine for 3 hrs, then suddenly freeze up just from clicking the start button). The 'freezes' happen randomly - not during any especially intensive computing. I initially thought something might be eating through my CPU and/or Memory, but Task Manager indicates that neither the CPU or Memory spike. In fact, even during serious lag, CPU usage remains at less than 5% and Memory at ~ 1.5GB. It's beyond me why a fresh install on a powerful machine is performing so poorly... and it certainly is frustrating! What could be causing the poor performance, and what can I do to fix it?

  Read the article

• Low CPU performance with low usage and clock - Windows 8.1

  - by Daniele

  I recently deleted everything from my PC and reinstalled Windows 8.1 from scratch. When I first booted into Windows everything was extremely slow though the CPU usage was very low (about 1%). After installing some drivers the problem seemed to be solved, I was able to use my PC normally. Today I installed a game and I noticed a strange behavior: the game was playable but the performance worsened more and more in the time. This is the situation BEFORE opening the game (normal): This is AFTER some minutes inside the game (low CPU usage and clock): Some information about my system: PC: Sony Vaio S13 (SVS13A1C5E) OS: Windows 8.1 CPU: Intel Core i7-3520M 2.90GHz GPU(1): Intel HD Graphics 4000 GPU(2): NVIDIA GeForce GT 640M LE I tried searching for new drivers and other solutions but noting worked and I don't know what is the cause. I did not checked the temperatures but the fans are not running fast and the PC does not look overheated. Update: Max CPU Temp: 66°C, Max GPU Temp: 61°C The strange thing is that the GPU load is 99% (GPU-Z) and the fan is almost silent. Update 2: I had troubles with Sony Vaio software, I can't get the FN keys and the STAMINA/SPEED switch to work (it is a physical switch to enable/disable the Nvidia card and change the Power Profile). I'm saying this because I remember that before reinstalling Windows there was an option in the Vaio Control Center (now it is not there anymore) that allowed me to choose from something like "priority to performance (ventilation)" or "priority to silence". The current behavior looks like a "priority to silence", but I can't get the stamina-speed switch to work and so I don't see similar oprions in the Vaio Control Center. I don't know if the problem is related to this.

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >