Search Results

Search found 9989 results on 400 pages for 'grails controller'.

Page 159/400 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• Logon Failure: the target account name is incorrect after making a ghost image of a server

  - by cop1152

  I recently replaced a failing SCSI drive in a Windows 2000 server with an IDE drive. I made an image of the SCSI drive and Ghosted it. The purpose of the machine was to give out DHCP at one location and host a couple of files. When I restarted the machine with the new drive, DHCP appears to be working fine, but I cannot get to any of the shares. Instead, I get the following message when attempting to navigate using Explorer. Logon Failure: the target account name is incorrect It appears that this machine is not communicating with the main domain controller. Changes to user accounts (performed on the domain controller) are not replicated on this machine.

  Read the article

• Older raid controllers in raid 5 vs. Jbod and SW raid

  - by TEB

  Hi. Im in the fortunate position to have 6 Supermicro older VOD servers with the following config: Supermicro 3U case, 3xPSU Dual Xeon 3ghz P4 class cpu (5 years old.. havnt checked the exact type) 4GB Ram 3ware 9500-8 SATA controller 8 SATA SLOTS and alot of free drives. 2GB FLASH Bootdrive What im curious about is the RAID5 performance on these old beasts in HW mode vs. SW on Linux with the controller set in JBOD mode. Im thinking on using Centos 5.5 or Ubuntu or ZFS RaidZ on Opensolaris. Any tips? or reccomendations ? best regards TEB

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by razass

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks.

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• High disk time on sql-server

  - by Patrik

  Hi We have a dedicated sql-server 2008 r2 enterprise edition. The setup is: D: (data files) - stored on local ssd disks (not the same disks as log files) (raid 10) E: (log files) - stored on local ssd disks (not the same disks as data files) (raid 1) F: (transaction log backup) - stored remote on a SAN Today we moved our log files to new disks (from F: to E:). From a shared volume ( F:(SAN)) to dedicated local disks (E:). What then happend was that the "disk time", "avg. transfer time" and "avg disk write queue length" increased on the volume where we have the data files (D:) (not on the volume where the log files are located). The data volume and log volume does not share disks, however they share the same controller card. "Disk idle time" is low for all volumes. One thought is ofcourse that the controller card might be overloaded. But, we need more ideas on where the problem might be.

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• Does mdadm allow to mix sata drives and USB -> sata drives ?

  - by marc

  Welcome, I have question, i have working array md5 of 5 drives. We are running out of space. Server don't have big usage but it have to be online. We can't add another controller. I got idea to buy a USB drive case ? Does mdadm allow to mix array created on sata drives by controller and virtual usb ? (we don't boot from mdadm) But im not sure is this will work ? Is usb drives are configurated before mdadm demon start ? Regards

  Read the article

• Where can I find a link to download the SP2 of OES2?

  - by Philippe

  Hi, I have a Netware Novell server with an eDirectory and different objects configured. I implemented an OEServer2 SP1 to emulate a DSfW to manage the eDirectory with AD. I join the domain with the Administrator login and I am logged as the Administrator domain. So far, there are no problems. When I open the MMC window on Windows Server 08 and snap in the "Active Directory Users and Computers" I can see all the OUs and objects presented in the Netware N. server. But, when I select some OUs I can have an error, and when I select other I don’t have this error. Error: “Data from XXXXX is not available from Domain Controller OES2.yyyy.local because: The server is unwilling to process the request. Try again later, or choose another DC by selecting Connect to Domain Controller on the Domain context menu.” With XXXX= OU’s name and yyyy.local= domain name and OES2 server name If somebody can upload this SP or post a link to download it... Thank you for your help!

  Read the article

• Best technique for reusing a Windows system image across configurations

  - by Martin Wiboe

  We are a small company that provides solutions for ventilation systems. Part of the solution is a "controller" which communicates with the ventilation equipment. These controllers are simply Dell computers that come with our Windows 7 system image on them and sometimes some special hardware. We typically do a batch of 10 controllers at a time. We have been using Norton Ghost to apply the system image, but this process breaks because Dell changes the system configuration often, and our Windows image now does not contain the correct drivers. This is especially a problem when they change the RAID controller. To improve this, I see 2 options: use some kind of virtualization and install a hypervisor on each PC. This would solve the driver problem, but probably cause trouble with our special hardware. use some method of adding the proper drivers to our Windows image in offline mode. I haven't got much experience in either of these approaches. How would you solve our problem?

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• Can I get redundancy with a JBOD storage subsystem

  - by Dat Chu

  I have a Promise Technology J610S. This is a JBOD subsystem. Is it possible for me to buy a SAS hardware RAID controller and provide some type of redundancy for these drives? I am unsure whether I will use Linux or Windows yet so an answer with enumeration for both would be highly appreciated. One solution that I thought of was: if my J610s can export each drive as a target, my server will simply see 16 drives. The RAID controller can then perform the RAID5/RAID6 if I want.

  Read the article

• Windows Filtering Platform not turning off until admin logon. Win2008R2sp1

  - by rjt

  Just installed Windows Server 2008R2 SP1 to see if it would fix this problem, but it didn't. Until an administrator logs onto the domain controller, there are many events that WFP blocked a connection from Server60 to Server60 or Server60 to Server70. Both server60 and server70 are the domain controllers. One the admin logs on, the WFP events stop. The firewall is off by default GPO. Yes, i know that the WFP kicks in during the boot up sequence until the firewall takes over or in my case does not take over (since Vista), but i clearly should not have to autologon to a domain controller and call autolock or something. Example event LEVEL = Information Source = Microsoft Windows Security Auditing EventID = 5152 "Filtering Platform Packet Drop" and its evil twin id = 5157 "Filtering Platform Connection" "The Windows Filtering platform has blocked a connection." Direction %%14593 SourceAddress 192.168.10.60 SourcePort 49677 DestAddress 192.168.10.60 DestPort 389 Protocol 6 FilterRTID 65667 LayerName %%14611 LayerRTID 48 RemoteUserID S-1-0-0 RemoteMachineID S-1-0-0 windows-server-2008-r2 WFP BFE WindowsFilteringPlatform BaseFilteringEngine

  Read the article

• Cannot access shares via \\servername but \\ip works

  - by Jeff

  To set up the scenario: One of our techs set one of the domain controllers to use Microsoft time. The time IS correct (including Time Zone) and DOES match the other domain controller's time; it was previously incorrect, however. Since the change, no users can connect via \\servername\share or \\servername.domainname.com but \\ip\share works fine. I cannot even access it from the other domain controller with which I know both have the same time. The servername DOES resolve to the correct IP address. Also, strangely enough, \\domainname.com works as well which resolves to the same server. Finally Everything that I have tried does resolve to the same, correct IP address. The error is: login failure: The target account name is incorrect. I believe it is time related but since the times are correct and match I'm not sure. Anyone know what might cause this?

  Read the article

• How is it possible for SSD's drives to have such a good latency?

  - by tigrou

  First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives have such a low latency, whereas they are using NAND chips? (or at least lot better than what a typical single NAND chip would do) EDIT: I think under-estimate NAND chip capabilities. USB drives, while powered by NAND's are mostly limited by USB protocol (which have a pretty high latency) and the USB controller. That explain their poor performance in some cases.

  Read the article

• DNS record reappears after having been deleted

  - by palmbardier

  I've got a Microsoft Windows Server 2003 R2 acting as a domain controller for a small network. It provides DHCP and DNS among a few other services. It's only got a single NIC, but it's configured with two IP addresses. I want it's name to resolve to one of the two IP addresses assigned to its NIC. I've unchecked "Register this connection's addresses in DNS" under the "Advanced TCP/IP Settings". Currently we've got two distinct DNS Host (A) records for this domain controller: dc-001 - 10.0.0.1 dc-001 - 10.0.100.1 I've deleted the first entry but it continues to reappear in my dnsmgmt snap-in. Unfortunately I'm not a Microsoft systems administrator by trade. Does anyone familiar with Microsoft server environments know why a deleted Host (A) record would reappear? Is there another check-box I need to toggle? Thanks in advance to all of you Microsoft experts out there.

  Read the article

• Remote Desktop Problem on Windows Server 2008 R2

  - by lukiffer

  Revised this question to be more concise, consolidating several revisions. Symptoms: From a domain-member Windows 7 Client: Domain credentials to a domain controller = success Domain credentials to a member server (by hostname or FQDN) = success Domain credentials to a member server (by IP) = fail Local credentials to a member server (by either) = success From a non-domain-member Windows 7 Client: Domain credentials to a domain controller = success Domain credentials to a member server = fail Local credentials to a member server = success (Identical behavior from a Mac RDC 2.1 client) Server Configuration Details: Windows 2008 R2 Datacenter w/ SP1 The domain in question is a subdomain of a Windows 2008 domain (forest root). Root has DCs in both Site A and Site B, subdomain only has DCs in Site B. RDP is operating normally on all root member-servers and DCs. No remote desktop settings are defined by GPOs. Network level authentication is enabled; all clients are compatible and the certificate exchange/SSL handshake completes successfully. Not catching any errors in netlogon log.

  Read the article

• How could all of my hard drives fail at once?

  - by Taylor

  I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

  Read the article

• How SSD's drives reduce their latency?

  - by tigrou

  First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives managed to reduce latency? (or at least lot better than what a single NAND chip without any controller can do)

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

• Starting VMs with an executable with as low overhead as possible

  - by Robert Koritnik

  Is there a solution to create a virtual machine and start it by having an executable file, that will start the machine? If possible to start as quickly as possible. Strange situation? Not at all. Read on... Real life scenario Since we can't have domain controller on a non-server OS it would be nice to have domain controller in an as thin as possible machine (possibly Samba or similar because we'd like to make it startup as quickly as possible - in a matter of a few seconds) packed in a single executable. We could then configure our non-server OS to run the executable when it starts and before user logs in. This would make it possible to login into a domain.

  Read the article

• Time Synch Architecture in Windows Domain Environment

  - by Param

  I just read the following article -- "In a domain, time synchronization takes place when Windows Time Service turns on during system startup and periodically while the system is running." ( http://technet.microsoft.com/en-us/library/cc779145%28v=ws.10%29.aspx ) From the above article i get to know that the first sync it take as soon as i start my system, but after that in how many minutes or second or in how many periodic interval my windows client ( Window XP, window7 or window server 2008 member ) synch with my Domain controller (PDC emulator )??? Do you have any idea, and how should i verify my synch time interval? My Domain Controller is Window server 2008 R2 Standard

  Read the article

• Starting VM as an executable with as low overhead as possible

  - by Robert Koritnik

  Is there a solution to create a virtual machine and start it by having an executable file, that will start the machine? If possible to start as quickly as possible. Strange situation? Not at all. Read on... Real life scenario Since we can't have domain controller on a non-server OS it would be nice to have domain controller in an as thin as possible machine (possibly Samba or similar because we'd like to make it startup as quickly as possible - in a matter of a few seconds) packed in a single executable. We could then configure our non-server OS to run the executable when it starts and before user logs in. This would make it possible to login into a domain.

  Read the article

• Is there any trick to join and use Windows 8/8.1 with Samba 4 (4.1.6)?

  - by tenshimsm

  It seems that Samba doesn't like at all. I've followed various tutorials and I can't get Windows 8 to work properly with a Ubuntu Server as domain controller. This week i've downloaded ubuntu 14.04 lts and set a fast domain configuration. As usual all other Windows version (XP and 7) work but the newest M$ nightmare doesn't. In this try it doesn't even join the domain, keeps saying the my username or password are wrong. My /etc/samba/smb.conf # Global parameters [global] workgroup = DOMAIN realm = DOMAIN.LAN netbios name = DOM server role = active directory domain controller dns forwarder = 8.8.8.8 idmap_ldb:use rfc2307 = yes [netlogon] path = /var/lib/samba/sysvol/domain.lan/scripts read only = No [sysvol] path = /var/lib/samba/sysvol read only = No [test] directory mode = 0750 path = /SHARES/test read only = no Does anyone have a tutorial that really works? Because I've tried many, each one with different configurations that works only with the people that made them. And is there a way to import my old AD users, computers and ID in a way that I won't need to rejoin all computers?

  Read the article

• How to expand Raid 5 on ICH10 - Gigabyte ex58-ds4?

  - by NeverEatAlone

  I was wondering if there is a relatively simple way to expand my HD space. My setup is 4 x 640 GB drives. Motherboard has 4 ports on 1 controller and 2 ports on another controller, however they cant be joined. I would like to somehow get more store space in raid configuration. One scenario that I can see working is replacing one 640 drive for a 2TB drive. Waiting for Raid to rebuild. Rinse and repeat. However, I have no idea if I would be able to even see/access the new space. All alternatives / ideas are welcome. Thank you

  Read the article

• Can I mix drive types in an HP server?

  - by Generic Error

  I currently have the following setup: HP DL380 G4 Server 6 x 73GB, Ultra160, 10k, SCSI 80 Pin Drives Smart Array 6i Controller RAID 5 One of the drives is failing and needs to be replaced. I have on hand drives that are the same size and type, but are Ultra320, 15k instead. I have verified that these drives work in another system with the same type of drive controller. When I plug one of these in the system simply reports the drive as being offline and has nothing further to do with it. From what I have read these drives should be compatable. Should this work at all and if so, what might be preventing it?

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >