Search Results

Search found 6898 results on 276 pages for 'messages'.

Page 159/276 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• X won't start, root filesystem mounted read only

  - by TK Kocheran

  I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• How to Enable Priority Inbox on Android (and Setup Important-Only Notifications)

  - by The Geek

  Yesterday Google released an updated Gmail application for Android 2.2 phones that supports the Priority Inbox feature—and more importantly, allows you to change your notifications to only alert you for important email. Let’s take a look. Note: If you’ve never used Priority Inbox, you should really give it a try—it rearranges your email into what is and isn’t important, and you can customize how it classifies messages easily. The idea is that it learns over time, so if you send a lot of emails back and forth with somebody, it will know that they are probably important—you can manually adjust the settings as well. To update the Gmail application, you’ll want to head into the Market and access Menu –> Downloads, where you should see Gmail in the list, and it should let you update from there. If you don’t see an update, you’re either not running Android 2.2, or it has already updated automatically Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• How do you avoid name similarities between your classes and the native ones?

  - by Oscar

  I just ran into an "interesting problem", which I would like your opinion about: I am developing a system and for many reasons (meaning: abstraction, technology independence, etc) we create our own types for exchanging information. For instance: if there is a method which is called SendEmail and is invoked by the business logic, it way have a parameter of type OurCompany.EMailMessage, which is an object which is completely technology independent and contains only "business relevant data" (for instance, no information abut head encoding). Inside the SendEmail function, we get this information from our EMailMEssage object and create a MailMessage (this one is technolgy specific) object so it can be sent over the network. As you can already notice, our class has a very similar name to the "native" language class. The problem is: this is exactly what they are, email messages, so it is hard to find another meaningful name for them. Do you have this problem often? How do you manage it? Edit: @mgkrebbs just commented about using fully qualified names. This is our current approach, but a little bit too verbose, IMHO. I would like something cleaner, if possible.

  Read the article

• Calling a model from a controller from the 404 route [migrated]

  - by IrishRob

  Got a problem here where I can’t seem to load a method from a model after the page has been redirected after encountering a 404. Model name: Category_Model Method name: get_category_menu() In my routes, I’ve updated the 404 over-ride to: $route[‘404_override’] = ‘whoops’; I’ve also got my controller Whoops that reads… <?php class Whoops extends CI_Controller { function index() { $this->load->model('Category_Model'); $data['Categories'] = $this->Category_Model->get_category_menu(); $data['main_content'] = $this->load->view('messages/whoops', null, true); $this->load->view('includes/template', $data); } } So when I navigate to a page that doesn’t exist, I get the following error… Message: Undefined property: Whoops::$Category_Model Filename: controllers/whoops.php I’ve hard coded the loading of the model into the controller here, even though I have it in my autoload, but no luck. Everything else with the site so far works, just this 404 problem. Any pointers would be great, kinda new to CI so go easy on me. Cheers.

  Read the article

• Messaging with KnockoutJs

  - by Aligned

  MVVM Light has Messaging that helps keep View Models decoupled, isolated, and keep the separation of concerns, while allowing them to communicate with each other. This is a very helpful feature. One View Model can send off a message and if anyone is listening for it, they will react, otherwise nothing will happen. I now want to do the same with KnockoutJs View Models. Here are some links on how to do this: http://stackoverflow.com/questions/9892124/whats-the-best-way-of-linking-synchronising-view-models-in-knockout http://www.knockmeout.net/2012/05/using-ko-native-pubsub.html ~ this is a great article describing the ko.subscribable type. http://jsfiddle.net/rniemeyer/z7KgM/ ~ shows how to do the subscription https://github.com/rniemeyer/knockout-postbox will be used to help with the PubSub (described in the blog post above) through the Nuget package. http://jsfiddle.net/rniemeyer/mg3hj/ of knockout-postbox   Implementation: Use syncWith for two-way synchronization. MainVM: self.selectedElement= ko.observable().syncWith (“selectedElement”); ElementListComponentVM example: self.selectedElement= ko.observable().syncWith(“selectedElement”); ko.selectedElement.subscribe(function(){ // do something with the seletion change }); ElementVMTwo: self.selectedElement= ko.observable().syncWith (“selectedElement”); // subscribe example ko.postbox.subscribe(“changeMessage”, function(newValue){ }); // or use subscribeTo this.visible = ko.observable().subscribeTo("section", function(newValue) { // do something here }); · Use ko.toJS to avoid both sides having the same reference (see the blog post). · unsubscribeFrom should be called when the dialog is hidden or closed · Use publishOn to automatically send out messages when an observable changes o ko.observable().publishOn(“section”);

  Read the article

• Is my gedit-latex-plugin working properly?

  - by arroy_0209

  I have installed gedit-latex-plugin(0.2 rc3) to be used with gedit(2.30.3) in ubuntu 10.04. If I use the command gedit file.tex& in terminal the file is opened and it seems everything works fine but in the terminal, lots of comments appear, some of which are: 2012-03-31 22:14:27,263 DEBUG resources - Initializing resource locating 2012-03-31 22:14:27,361 DEBUG Preferences - not found 2012-03-31 22:14:27,373 DEBUG JobManager - Created JobManager instance 147209196 2012-03-31 22:14:27,379 DEBUG GeditLaTeXPlugin - activate 2012-03-31 22:14:27,379 DEBUG WindowContext - init 2012-03-31 22:14:27,444 DEBUG GeditWindowDecorator - _init_tab_decorators: initialized 0 decorators 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - active_tab_changed 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - ---------- ADJUST: None 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - No window-scope views for this extension 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:27,514 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 2012-03-31 22:14:27,539 DEBUG GeditWindowDecorator - tab_added 2012-03-31 22:14:27,952 DEBUG GeditTabDecorator - loaded 2012-03-31 22:14:27,964 DEBUG GeditTabDecorator - _adjust_editor: URI has changed 2012-03-31 22:14:27,965 DEBUG LaTeXCompletionHandler - init 2012-03-31 22:14:27,966 DEBUG LanguageModelFactory - Pickled object found: /home/abcd/.gnome2/gedit/plugins/GeditLaTeXPlugin/latex.pkl 2012-03-31 22:14:28,075 DEBUG CompletionDistributor - init 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view LaTeXOutlineView 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view IssueView 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - init(file:///home/abcd/dir1/file1.tex) 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - Parsing document... 2012-03-31 22:14:28,080 DEBUG IssueView - init 2012-03-31 22:14:28,082 DEBUG IssueView - init finished 2012-03-31 22:14:28,092 INFO LaTeXEditor - LaTeXParser.parse: 0.010000 2012-03-31 22:14:28,092 DEBUG LaTeXEditor - Parsed 1599 bytes of content 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - set_outline 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - init 2012-03-31 22:14:28,097 DEBUG LaTeXValidator - validate 2012-03-31 22:14:28,098 DEBUG LanguageModel - set_newcommands: 2012-03-31 22:14:28,102 DEBUG LaTeXEditor - Parsing finished 2012-03-31 22:14:28,105 DEBUG GeditWindowDecorator - ---------- ADJUST: .tex 2012-03-31 22:14:28,119 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:28,120 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 I am not sure if the gedit-latex-plugin is working properly or is it facing some problem. Why are there so many debug messages? Can anybody please suggest what I should do?

  Read the article

• Couldn't pass the signin screen on ubuntu

  - by Amokrane

  I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

  Read the article

• Necessary Infrastructure for large project with many components communicating through IPCs

  - by jluzwick

  I have a fairly in depth question which probably doesn't have an exact answer. As a software engineer, I am usually tasked with working on a program or project with minimal understanding of how other components or programs in the project interact with each other. When one program fails in a sea of multiple components and processes, what infrastructure elements are necessary to ensure that the problem can be accurately tracked to the violating application? More specifically, what infrastructure elements should be necessary for this large project and which are optional but very helpful. One such example I can think of is some form of a common logging infrastructure that allows for a developer or tester to easily browse through a log that contains numerous components for messages that might allude to the culprit program along with a "trail" of what happened before the issue occurred. I'm thinking of something similar to Androids alogcat tool. These necessary infrastructure elements should be language-agnostic. While these elements should be understood by all engineers on the team in question, which elements should be understood at great detail by the technical system engineers and what should the individual software engineers be responsible for adding to their tools to allow for such infrastructures to take hold? Please feel free to ask for clarification if something does not make sense as I understand this question is very broad and needs some refinement. I will refine as necessary from the answers and comments I receive. Thanks for any help!

  Read the article

• JDeveloper News &ndash; Did You Know

  - by shay.shmeltzer

  There have been a few issues lately with access to blogs.oracle.com to write new messages – and as a result I’m a little behind on reporting the latest and greatest in JDeveloper. (I’m also unable to approve comments :-( ) But just in case you missed it here are a few note worthy things you should know: ADF Mobile Client went production – this is a solution that let you use ADF to develop on-device applications for mobile devices. You develop once and run on various devices (right now Blackberry and Windows Mobile with other platforms coming soon). For more information check out the ADF Mobile page on OTN. ADF Developer Certification goes production – you can now take the official test and get an official certification that you can include in your resume.Should be a must for any consultant looking to get ADF related gigs. Learn more about the ADF Certification Exam. ADF Vision Stencils Released – If you are looking for a quick way to draw prototypes of ADF screens you probably can’t get any faster and more accurate results than this. This is a set of Vision components that you can drag over and design a page visually. You can also set properties for components and do other advance things. You do need a license for Visio to use this, but the ADF stencils are free. We’ve been using these internally at Oracle for some time now and we thought the ADF community would enjoy these too. Download the ADF Visio Stencils here (and watch a youtube demo of how they work).

  Read the article

• AI agents with FSM: a question regarding this

  - by Prog

  Finite State Machines implemented with the State design pattern are a common way to design AI agents. I am familiar with the State design pattern and know how to implement it. However I have a question regarding how this is used in games to design AI agents. Please consider a class Monster that represents an AI agent. Simplified it looks like this: class Monster{ State state; // other fields omitted public void update(){ // called every game-loop cycle state.execute(this); } public void setState(State state){ this.state = state; } // irrelevant stuff omitted } There are several State subclasses that implement execute() differently. So far classic State pattern. Here's my question: AI agents are subject to environmental effects and other objects communicating with them. For example an AI agent might tell another AI agent to attack (i.e. agent.attack()). Or a fireball might tell an AI agent to fall down. This means that the agent must have methods such as attack() and fallDown(), or commonly some message receiving mechanism to understand such messages. My question is divided to two parts: 1- Please say if this is correct: With an FSM, the current State of the agent should be the one taking care of such method calls - i.e. the agent delegates to the current state upon every event. Correct? Or wrong? 2- If correct, than how is this done? Are all states obligated by their superclass) to implement methods such as attack(), fallDown() etc., so the agent can always delegate to them on almost every event? Or is it done in some other way?

  Read the article

• Eliminating zero-length files

  - by RhZ

  I have been having multiple crashes recently. 4-5 last night within a few hours. I posted about it before, and got an answer but not sure how to proceed. The messages in my logs right before the crash are multiple complaints about valid eCryptfs headers. But the chron might not be related, I don't think I saw that in previous crashes: xxx-desktop kernel: [ 1112.274474] Valid eCryptfs headers not found in file header region or xattr region, inode 32376924 xxx-desktop CRON[4212]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) So I was sent to an answer providing this script: for i in find $(mount | grep " on $HOME type ecryptfs" | awk '{print $1}') -size 0c; do if ! fuser -v $i; then rm -f $i fi done I did find some zero byte files, not in the exactly right place (a folder called .private as I remember), but I need to fix this, its too bad right now. So I need to delete any of them that are not in use. I am a little too clueless, can someone walk me through executing this script? I don't know how.

  Read the article

• Allow non-sudo group to control Upstart job

  - by Angle O'Saxon

  I'm trying to set up an Upstart job to run on system startup, and that can also be started/stopped by members of a group other than sudo. With a previous version, I usedupdate-rc.d and scripts stored in /etc/init.d/ to get this working by adding %Group ALL = NOPASSWD: /etc/init.d/scriptname to my sudoers file, but I can't seem to get an equivalent working for Upstart. I tried adding %Group ALL = NOPASSWD: /sbin/initctl start jobname to the sudoers file, but trying to run the command start jobname produces this error: start: Rejected send message, 1 matched rules; type="method_call", sender=":1.21" (uid=1000 pid=5148 comm="start jobname " interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") As near as I can tell, that's a complaint about how my user account isn't given the power to send 'Start' messages in the D-Bus config file for Upstart. I haven't been able to actually find any information on how to edit that file to give a group permission to access a specific service--does such an option exist? Is there a way to edit the Sudoers file so I can run the job without editing the config file? Am I better off just sticking with the previous version?

  Read the article

• Cannot establish ssh connection to computer on local network

  - by ovangle

  I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

  Read the article

• HTML Tidy in NetBeans IDE

  - by Geertjan

  First step in integrating HTML Tidy (via its JTidy implementation) into NetBeans IDE: The reason why I started doing this is because I want to integrate this into the pluggable analyzer functionality of NetBeans IDE that I recently blogged about, i.e., where the FindBugs functionality is found. So a logical first step is to get it working in an Action class, after which I can port it into the analyzer infrastructure: import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionReferences; import org.openide.awt.ActionRegistration; import org.openide.cookies.EditorCookie; import org.openide.cookies.LineCookie; import org.openide.loaders.DataObject; import org.openide.text.Line; import org.openide.text.Line.ShowOpenType; import org.openide.util.Exceptions; import org.openide.util.NbBundle.Messages; import org.openide.windows.IOProvider; import org.openide.windows.InputOutput; import org.openide.windows.OutputEvent; import org.openide.windows.OutputListener; import org.openide.windows.OutputWriter; import org.w3c.tidy.Tidy; @ActionID(     category = "Tools", id = "org.jtidy.TidyAction") @ActionRegistration(     displayName = "#CTL_TidyAction") @ActionReferences({     @ActionReference(path = "Loaders/text/html/Actions", position = 150),     @ActionReference(path = "Editors/text/html/Popup", position = 750) }) @Messages("CTL_TidyAction=Run HTML Tidy") public final class TidyAction implements ActionListener {     private final DataObject context;     private final OutputWriter writer;     private EditorCookie ec = null;     public TidyAction(DataObject context) {         this.context = context;         ec = context.getLookup().lookup(org.openide.cookies.EditorCookie.class);         InputOutput io = IOProvider.getDefault().getIO("HTML Tidy", false);         io.select();         writer = io.getOut();     }     @Override     public void actionPerformed(ActionEvent ev) {         Tidy tidy = new Tidy();         try {             writer.reset();             StringWriter stringWriter = new StringWriter();             PrintWriter errorWriter = new PrintWriter(stringWriter);             tidy.setErrout(errorWriter);             tidy.parse(context.getPrimaryFile().getInputStream(), System.out);             String[] split = stringWriter.toString().split("\n");             for (final String string : split) {                 final int end = string.indexOf(" c");                 if (string.startsWith("line")) {                     writer.println(string, new OutputListener() {                         @Override                         public void outputLineAction(OutputEvent oe) {                             LineCookie lc = context.getLookup().lookup(LineCookie.class);                             int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", ""));                             Line line = lc.getLineSet().getOriginal(lineNumber - 1);                             line.show(ShowOpenType.OPEN, Line.ShowVisibilityType.FOCUS);                         }                         @Override                         public void outputLineSelected(OutputEvent oe) {}                         @Override                         public void outputLineCleared(OutputEvent oe) {}                     });                 }             }         } catch (IOException ex) {             Exceptions.printStackTrace(ex);         }     } } The string parsing above is ugly but gets the job done for now. A problem integrating this into the pluggable analyzer functionality is the limitation of its scope. The analyzer lets you select one or more projects, or individual files, but not a folder. So it doesn't work on folders in the Favorites window, for example, which is where I'd like to apply HTML Tidy, across multiple folders via the analyzer functionality. That's a bit of a bummer that I'm hoping to get around somehow.

  Read the article

• Client Side Prediction for a Look Vector

  - by Mike Sawayda

  So I am making a first person networked shooter. I am working on client-side prediction where I am predicting player position and look vectors client-side based on input messages received from the server. Right now I am only worried about the look vectors though. I am receiving the correct look vector from the server about 20 times per second and I am checking that against the look vector that I have client side. I want to interpolate the clients look vector towards the correct one that is server side over a period of time. Therefore no matter how far you are away from the servers look vector you will interpolate to it over the same amount of time. Ex. if you were 10 degrees off it would take the same amount of time as if you were 2 degrees off to be correctly lined up with the server copy. My code looks something like this but the problem is that the amount that you are changing the clients copy gets infinitesimally small so you will actually never reach the servers copy. This is because I am always calculating the difference and only moving by a percentage of that every frame. Does anyone have any suggestions on how to interpolate towards the servers copy correctly? if(rotationDiffY > ClientSideAttributes::minRotation) { if(serverRotY > clientRotY) { playerObjects[i]->collisionObject->rotation.y += (rotationDiffY * deltaTime); } else { playerObjects[i]->collisionObject->rotation.y -= (rotationDiffY deltaTime); } }

  Read the article

• Update get's stuck unpacking bad package, won't continue without it

  - by Shazzner

  Removing the package from cache, and disabling Recommended Updates in Software Sources gives me an error saying I need to install this package. I've tried to update several times, but it keeps hanging on unpacking the ubuntu-sso-client package. Which forces me to hard-reset to unlock the package manager. I've tried: sudo dpkg --configure -a No errors sudo apt-get upgrade --fix-broken Wants me to reinstall said package, resulting in it hanging Removing the package: sudo rm -f /var/cache/apt/archives/ubuntu-sso-client_1.0.8-0ubuntu1_all.deb Results in the same effect, it re-downloads then hangs I can de-select Recommended Updates but I get error messages when I try to update again: E: The package ubuntu-sso-client needs to be reinstalled, but I can't find an archive for it. Which won't let me continue Finally re-enabling the source, I try to remove ubuntu-sso sudo apt-get remove ubuntu-sso-client It removes a bunch of other packages but complains about the package: dpkg: error processing ubuntu-sso-client (--remove): Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. Reinstalling ubuntu-sso-client hangs :( I'm at my wits end, any ideas? I would be nice to install all the other updates but this one is preventing it.

  Read the article

• Need help: jBPM installation issue

  - by Kouky

  This is Ms Kahina, I’m getting started with jBPM & Java EE, I tried to install the jBPM 5.4 version by following all the steps stated in the iBPM user guide as below: 1- I’ve installed Java (JDK 1.7) and ant ( Apache-ant-1.9.4). 2- I’ve set both JAVA_HOME and ANT_HOME environement variables. 3- I’ve downloaded the jBPM 5.4 full installer and run the installation script “ant install.demo” and after that the start script “ant start.demo”. But unfortunately jBPM 5.4 is not working. When running the installation Script I’m getting successful message but with the following warnings : [copy] Warning: Could not find file C:\jbpm-installer\db\task-persistence.xml to copy. [copy] Warning: Could not find file C:\jbpm-installer\db\Taskorm.xml to copy. The start demo was successful. Actually when I try to open any tool provided with the jBPM such us the jBPM-console for example I’m getting the following messages: Address not found or sometimes the http status 404 occurred even if the Welcome page of jBoss AS was opened at http://localhost:8080/. Please need your assistance to sort out this issue in order to move forward in my project as I'm blocked in the installation stage since more than a week now, I don’t know if this is related to the jBoss AS7 or to any other thing that I didn’t find out. Looking forward to hearing from you. Thanks Kahina

  Read the article

• What could have caused a large traffic drop from Google in early May?

  - by Scott Schluer

  I have a website (www.equispot.com) that has been indexed for almost 2 years in Google. I managed to get myself on the first page (average position 6-8) on Google for my target keyword of "horses for sale" and held there pretty solidly for months. Suddenly, with no changes to the site, traffic from Google dropped like a rock in early May. I slowly fell in position until now I'm sitting at the bottom of page 4. I have never hired an SEO firm, have not used any "black hat" techniques that Google would have penalized me for in their May update, etc. I'm not familiar enough with SEO to know how to look at link profiles, etc. to tell if there's something wrong. I've run my site through a DNS checker and it came back with no errors. Google Webmaster Tools shows no messages or notices of any kind, just a drop in traffic. GWT also shows only 2 server errors and 1 404. Is there anyone who can tell me by quickly checking my domain if there's an obvious reason that my traffic would have fallen so far, something that I can fix?

  Read the article

• SharePoint 2007 Enabling Incoming Email Error

  - by Cherie Riesberg

  Symptom: When configuring incoming e-mail, the e-mails come through just fine if the server name is in the e-mail address: [email protected] but when you change it to a vanity name [email protected], the message is bounced back and you get this error: Delivery has failed to these recipients or distribution lists: [email protected] Your message wasn't delivered because of security policies. Microsoft Exchange will not try to redeliver this  message for you.    Please provide the following diagnostic text to your system administrator. The following organization rejected your message: servername01.fqdn.com.   Problem: The SharePoint server relay rejects the message because it doesn't recognize the name.  You have set it up in Exchange, but you need to set up an alias in the SMTP service on the SharePoint server;   Solution: Configure an Alias Domain An alias domain is an alias of the default domain. You can set up alias domains that use the same settings as the default domain. Messages that are received by the SMTP Service for an alias domain are placed in the Drop folder that is designated for the default domain. To configure an alias domain, follow these steps: Start IIS Manager or open the IIS snap-in. Expand Server_name, where Server_name is the name of the server, and then expand the SMTP virtual server that you want (for example, Default SMTP Virtual Server). Right-click Domains, point to New, and then click Domain. The New SMTP Domain Wizard starts. Click Alias, and then click Next. Type a name for the alias domain in the Name box, and then click Finish. Quit IIS Manager or close the IIS snap-in.

  Read the article

• Getting error message when trying to start a virtual machine

  - by Sunil J

  I have been using VMWare on Windows for a long time. But after a long wait, I moved to VirtualBox on Ubuntu 11.10. I installed Ubuntu, 32 Bit, installed all available updates and installed Virtual Box. When I try to create a new Windows installation inside VirtualBox, I got the following error messages. 1st error dialogue VirtualBox - Error Failed to open a session for the virtual machine Windows XP.<br> The virtual machine '**Windows XP**' has terminated unexpectedly during startup with exit code 1.<p> Details<p> Result Code: <br> NS_ERROR_FAILURE (0x80004005)<br> Component: <br> Machine<br> Interface: <br> IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}<p> 2nd error dialogue **Virtualbox - Error in suplibOsinit**<br> **Kernal driver not installed (rc--1908)**<br> Please install the virtualbox-dkmbs package and execute 'modprobe vboxdrv' as root.<p> Steps I tried I have already tried reinstalling VirtualBox. Google result seem to indicate the the problem happens due to Kernel updates. Is there anyway I can get this working? I need this for malware analysis and if VirtualBox is going to crash on me all the time, then I won't be able to use Ubuntu for work. Output to dpkg -l | grep virtual server rc virtualbox 4.1.2-dfsg-1ubuntu1 x86 virtualization solution - base binaries rc virtualbox-qt 4.1.2-dfsg-1ubuntu1 x86 virtualization solution - Qt based user interface cute 'modprobe vboxdrv' as root.<p>

  Read the article

• How to Install Broadcom Wireless Drivers (BCM43xx)

  - by Fer1805

  I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

  Read the article

• Upgraded from 11.4 to 11.10, There was an error, now the system won't initiialize

  - by Eric

  This morning the system gave me a message that my Version (11.4) was no longer supported, and I took the 'upgrade' option (- 11.10). While installing the various components I encountered a message to the effect that the there was an error and the system may have become unusable. Among the messges: E:Sup-process /usr/bin/dpkg received a segmentation fault...returned an error code (1). I was given an option to do several things, one of which seemed to mean that it would attempt to roll back to the previous version (the default), which I took. After the process ran it said the upgrade process had finished, but there were errors. I attempted to initialize a console so I could enter ubuntu-bug update-manager /var/log/dist-upgrade, per the instructions I received when I received the error message, but the console failed during initialization. I restarted the machine, and the screen has stopped with the following contents: * Starting bluetooth * Stopping save kernel messages * Starting CUPS printing spooler/server * PulseAudio configured per-user sessions saned disabled: edit /etc/default/saned $starting up Cisco VPN daemon *Starting anac(h)ronistic cron *Stopping anac(h)ronistic cron Each of these steps followed by [ OK ] What are my options? Any help appreciated!

  Read the article

• Must all AI states be able to react to any event?

  - by Prog

  FSMs implemented with the State design pattern are a common way to design AI agents. I am familiar with the State design pattern and know how to implement it. How is this used in games to design AI agents? Consider a simplified class Monster, representing an AI agent: class Monster { State state; // other fields omitted public void update(){ // called every game-loop cycle state.execute(this); } public void setState(State state){ this.state = state; } // irrelevant stuff omitted } There are several State subclasses implementing execute() differently. So far, classic State pattern. AI agents are subject to environmental effects and other objects communicating with them. For example, an AI agent might tell another AI agent to attack (i.e. agent.attack()). Or a fireball might tell an AI agent to fall down. This means that the agent must have methods such as attack() and fallDown(), or commonly some message receiving mechanism to understand such messages. With an FSM, the current State of the agent should be the one taking care of such method calls - i.e. the agent delegates to the current state upon every event. Is this correct? If correct, how is this done? Are all states obligated by their superclass to implement methods such as attack(), fallDown() etc., so the agent can always delegate to them on almost every event? Or is it done in some other way?

  Read the article

• Is IDirectInput8::FindDevice totally broken on Windows 7?

  - by Noora

  I'm developing on Windows 7, and using DirectInput8 for my input needs. I'm tracking gamepad additions and removals (that is, GUID_DEVINTERFACE_HID devices) using the DBT_DEVICEARRIVAL and DBT_DEVICEREMOVECOMPLETE messages, which works fine. However, what I've come to find out is that no matter what I do, passing the received values from DBT_DEVICEARRIVAL to IDirectInput8's FindDevice method, it will always fail to identify the device, returning DIERR_DEVICENOTREG. DirectInput still clearly knows about the device, because I can enumerate and create it just fine. I've tried with three different gamepads, and the error persists, so it's not about that either. I also tried passing some alternative interface GUIDs for the RegisterDeviceNotification call, didn't help. So, has anyone else faced the same problem, and have you found a usable workaround? I'm afraid I'll soon have to stoop down to re-enumerating all devices when something is added or removed, but I'll first give this question one last shot here. EDIT: For the record, I've also tried pretty much every single HID API & SetupAPI function for alternative ways of figuring out the needed GUIDs, with zero success. So if you're facing the same problem as me, don't bother with that route. I'm pretty sure those GUIDs are made up by DirectInput itself somehow. Short of reverse engineering dinput8.dll, I'm truly out of ideas now.

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >