Search Results

Search found 10798 results on 432 pages for 'port scanning'.

Page 159/432 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• 3G USB Modem Not Working in 12.04

  - by Seyed Mohammad

  When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

  Read the article

• URL Parts available to URL Rewrite Rules

  - by OWScott

  URL Rewrite is a powerful URL rewriting tool available for IIS7 and newer.  Your rewriting options are almost unlimited, giving you the ability to optimize URLs for search engine optimization (SEO), support multiple domain names on a single site, hiding complex paths and much more. URL Rewrite allows you to use any Server Variable as conditions, and with URL Rewrite 2.0, you can also update them on the fly.  To see all variables available to your site, see this post. An understanding of the parts of a complete URL are essential to working with URL Rewrite, so I’ll include the basics here.  Ruslan Yakushev’s configuration reference was my authoritative source for this. Take this URL for example: The URL is http://www.bing.com/search?q=IIS+url+rewrite The parts of the URL are: http(s)://<host>:<port>/<path>?<querystring> Part Example Server Variable http(s) http SERVER_PORT_SECURE or HTTPS = on/off <host> www.bing.com HTTP_HOST <port> Default is 80 SERVER_PORT <path> search The rule pattern in URL Rewrite <path> /search PATH_INFO <querystring> q=IIS+url+rewrite QUERY_STRING entire URL path with querystring /search?q=IIS+url+rewrite REQUEST_URI It’s important to note that /, : and ? aren’t included in some of the server variables. Understanding which slashes are included is important to creating successful rules.

  Read the article

• Recreating OMS instances in a HA environment when instances on all nodes are lost

  - by rnigam

  Oracle highly recommends deploying EM in a HA environment. The best practices for HA deployments, backup and housekeeping of your Enterprise Manager environment are documented in the Oracle Enterprise Manager Advanced Configuration Guide. It is imperative that there is a good disaster recovery plan in place for your EM deployment. In this post I want to talk about a customer who failed to do the correct planning and housekeeping for EM and landed in a situation where we the all the OMSes were nearly blown away had we not jumped to help. We recently hit an issue at a customer site where we had a two node OMS setup of the Enterprise Manager and a RAC Database being used as the EM repository. An accidental delete of the OMS oracle home left us with a single node deployment. While we were trying to figure out a possible path to recover the first node, the second node was rebooted under a maintenance window. What followed was a complete site outage as the Admin and managed servers would not start on either of the nodes. In my situation there were - No backups of the Oracle Homes from any node - No OMS Configuration snapshots (created using the “emctl exportconfig oms” command) and the instance home was completely lost on node 1 which also had the Admin Server  We did however have: - A copy of the emkey.ora that I found under the OMS_ORACLE_HOME/ of the second node (NOTE: it is a bad practice to have your emkey present under the OMS Oracle home directory on the same server as the OMS. The backup of the emkey should be maintained on some other server. In this case however it was a savior in my situation since there were no backups - The oms oracle home on the second node but missing a number of files and had a number of changes done to the files in the home. There were a number of attempts to start the server by modifying various files based on the Weblogic server logs to have atleast node up and running but all of them failed. Here is how you can recover from this scenario: Follow these steps: STEP 1: Check status of emkey.ora Check whether the emkey exists is present in the EM repository or not. Run the following command: $OMS_ORACLE_HOME/bin/emctl status emkey If the output is something like this below then you are good to go and the key is present in the repository ./emctl status emkey Oracle Enterprise Manager 11g Release 1 Grid Control Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. Enter Enterprise Manager Root (SYSMAN) Password : The EMKey is configured properly. Here are the messages that you might see as the emctl status emkey output depending upon whether the EM Admin Server is up and if the key is configured properly: Case1:  AdminServer is up, emkey is proper in CredStore & not in repos. This is same as the output of the command shown above:The EMKey is configured properly Case 2: AdminServer is up, emkey is proper in CredStore & exists in repos:The EMKey is configured properly, but is not secure. Secure the EMKey by running "emctl config emkey -remove_from_repos".Case 3: AdminServer is down or emkey is corrupted in CredStore) & (emkey exists in repos): The EMKey exists in the Management Repository, but is not configured properly or is corrupted in the credential store.Configure the EMKey by running "emctl config emkey -copy_to_credstore".Case 4: (AdminServer is down or emkey is corrupted in CredStore) & (emkey does not exist in repos): The EMKey is not configured properly or is corrupted in the credential store and does not exist in the Management Repository. To correct the problem:1) Get the backed up emkey.ora file.2) Configure the emkey by running "emctl config emkey -copy_to_credstore_from_file". If not the key was not secured properly, we will have to be put in the repository before proceeding. Look at the next step 2 for doing this There may be cases (like mine) where running emctl may give errors like the following: $OMS_ORACLE_HOME/bin/emctl status emkey Exception in thread “Main Thread” java.lang.NoClassDefFoundError: oracle/security/pki/OracleWallet At oracle.sysman.emctl.config.oms.EMKeyCmds.main (EMKeyCmds.java:658) Just move to the next step to put the key back in the repository STEP 2: Put emkey.ora back in the repository Skip this step if your emkey.ora is present in the repository. If not, you need to put the key back in the repository See if you can run the following command (with sample output): $OMS_ORACLE_HOME/bin/emctl config emkey –copy_to_repos Oracle Enterprise Manager 11g Release 1 Grid Control Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. The EMKey has been copied to the Management Repository. This operation will cause the EMKey to become unsecure. After the required operation has been completed, secure the EMKey by running "emctl config emkey -remove_from_repos". Typically the key is present under $OMS_ORACLE_HOME/sysman/config directory before being removed after the install as a best practice. If you hit any errors while running emctl commands like the one mentioned in step 1, jump to step 3 and we will take care of the emkey.ora in Step 5 STEP 3: Get the port information Check for the existing port information in the emd.properties file under EM_INSTANCE_DIRECTORY (typically gc_inst directory right above the Middleware home where you have deployed em. For eg. /u01/app/oracle/product/gc_inst in case your oms home is /u01/app/oracle/product/Middleware/oms11g) In my case I got the information from the emgc.properties present in the gc_inst on the second node. If you can run emctl you may want to try the following command as well $OMS_ORACLE_HOME/bin/emctl status oms –details Note this information as this will be used in the next step STEP 4: Perform cleanup on Node 1 Note the oracle home of the Weblogic and OMS, get the list of applied patches in the homes (using opatch lsinventory command), take a backup copy of the home just in case we need it and then de-install/remove oracle homes, update inventory and cleanup processes on the first node STEP 5: Perform Software Only Installation of OMS on Node 1 Perform Weblogic 10.3.2 installation exactly under the same location as present in the earlier installation. Perform software only installation of the OMS using the following command. This will not run any configuration assistants and bypass all user interface validations runInstaller –noconfig -validationaswarnings Select the “Additional OMS” option while performing the installation. Provide the same path for OMS and Instance directories like the previous installation Use the port information collected in Step 3 while performing the installation. Once the installation is complete run the allroot.sh script to complete the binary deployment STEP 6: Apply one-off patches At this point you can apply any patches to the OMS Oracle Home previously. You only need to run opatch to install the patch in the home and not required to run the SQLs STEP 7: Copy EM key This step is only required if you were not able to use emctl command to put the emkey back into the EM repository in STEP 2 Copy the emkey.ora file of the old installation you have under $OMS_ORACLE_HOME/sysman/config directory of the newly installed OMS STEP 8: Configure Grid Control Domain Run the following command to configure the EM domain and OMS. Note that you need to use a different GC Domain name than what you used earlier. For example I have used GCDOMAIN11 as the new domain name when my previous domain name was GCDOMAIN $OMS_ORACLE_HOME/bin/omsca new –AS_USERNAME weblogic –EM_DOMAIN_NAME GCDOMAIN11 –NM_USER nodemanager -nostart This command as shown below will prompt for a number of inputs like Admin Server hostname, port, password, etc. Verify if the defaults shown are correct by pressing enter or provide a new value STEP 9: Run Add-ON Configuration Assistant After this step run the following add-on configuration assistant. This was used in my case to configure the virtualization add-on $OMS_ORACLE_HOME/addonca -oui -omsonly -name vt -install gc STEP 10: Start the OMS Now start the OMS using $OMS_ORACLE_HOME/bin/emctl start oms In a multi-node setup like mine you would either have a software load balancer or DNS round robin (using a virtual host name that resolves to one of multiple OMS hostnames) being used for load balancing. Secure the OMS against the SLB or DNS virtual hostname using the following $ OMS_HOME/bin/emctl secure oms -host slb.example.com -secure_port 1159 -slb_port 1159 -slb_console_port 443 STEP 11: Configure the Agent From the $AGENT_ORACLE_HOME/bin run the ./agentca –f At this point you should have your OMS on node 1 fully re-covered. Clean up node 2 and use the normal Additional OMS installation process documented in the official installation guide to add the additional OMS on node 2 Summary It took us nearly a little over two days to completely recover the environment with some other non-EM related issues that hit us along the way as well. In the end a situation like this could have been completely avoided had the proper housekeeping and backup of the Enterprise Manager Deployment been done in the first place. This is going to a topic that we cover in the next post. In the meantime please do refer to the Oracle Enterprise Manager Advanced Configuration Guide for planning your EM installation, backup and housekeeping procedures. This can be found here: http://download.oracle.com/docs/cd/E11857_01/index.htm Thanks This post would not have been possible without Raj Aggarwal, Prasad Chebrolu and Ravikumar Basa who helped to recover the environment and provided all the support we needed

  Read the article

• Java Spotlight Episode 97: Shaun Smith on JPA and EclipseLink

  - by Roger Brinkley

  Interview with Java Champion Shaun Smith on JPA and EclipseLink. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Project Jigsaw: Late for the train: The Q&A JDK 8 Milestone schedule The Coming M2M Revolution: Critical Issues for End-to-End Software and Systems Development JSR 355 passed the JCP EC Final Approval Ballot on 13 August 2012 Vote for GlassFish t-shirt design GlassFish on Openshift JFokus 2012 Call for Papers is open Who do you want to hear in the 100 JavaSpotlight feature interview Events Sep 3-6, Herbstcampus, Nuremberg, Germany Sep 10-15, IMTS 2012 Conference,  Chicago Sep 12,  The Coming M2M Revolution: Critical Issues for End-to-End Software and Systems Development,  Webinar Sep 30-Oct 4, JavaONE, San Francisco Oct 3-4, Java Embedded @ JavaONE, San Francisco Oct 15-17, JAX London Oct 30-Nov 1, Arm TechCon, Santa Clara Oct 22-23, Freescale Technology Forum - Japan, Tokyo Nov 2-3, JMagreb, Morocco Nov 13-17, Devoxx, Belgium Feature InterviewShaun Smith is a Principal Product Manager for Oracle TopLink and an active member of the Eclipse community. He's Ecosystem Development Lead for the Eclipse Persistence Services Project (EclipseLink) and a committer on the Eclipse EMF Teneo and Dali Java Persistence Tools projects. He’s currently involved with the development of JPA persistence for OSGi and Oracle TopLink Grid, which integrates Oracle Coherence with Oracle TopLink to provide JPA on the grid. Mail Bag What’s Cool James Gosling and GlassFish (youtube video) Every time I see a piece of C code I need to port, my heart dies a little. Then I port it to 1/4 as much Java, and feel better. Tweet by Charles Nutter #JavaFX 2.2 is really looking like a great alternative to Flex. SceneBuilder + NetBeans 7.2 = Flash Builder replacement. Tweet by Danny Kopping

  Read the article

• Changing Endpoint URL for a Web Service Data Control

  - by vishal.s.jain(at)oracle.com

  When you move your application from Development to Production, there is more often then not, a need to change the web service endpoint URL in your ADF application. If you are using a Web Service Data Control(WSDC), you can do this in more than one ways. The following example illustrates how this can be done.At Design TimeIf the application workspace is in your control, you can quickly do this by updating the definition in DataControl.dcx file:Along with this, you will also need to change the endpoint in connections.xml. So invoke the Edit Connections dialog: Then, change the endpoint URL.At DeploymentAnother way to change is changing the endpoint at the ear level, at deployment. So when you select Deploy -> Application Server at the Application level, it will bring up a Deployment Configuration dialog, in which you can edit the WSDL URL:Also, change the Port URL:At Post DeploymentIf your need to change this post deployment, you can do it through Oracle Enterprise Manager. But for this, your application needs to be configured with a writable MDS repository. It is recommended you use a Database MDS store during deployment. So have your application configured (by having an entry in adf-config.xml) and server configured (by having a MDS store registered). Once done, you can configure the ADF Connection in EM for this application:Change the WSDL location here on 'Edit':Also, change the Port using Advance Connection Configuration:Change the Endpoint Address here:Apply Changes and you are done!

  Read the article

• 550 “Overwrite permission denied” when editing a file via FTP

  - by nodebunny

  DreamHost recently moved my accounts to a new shared box, and now I can't edit files via UltraEdit's built in FTP client, which messes up my work flow! What did they do that this is not working now? It stopped working after they moved me. Here's the output from the FTP console in UltraEdit 10/26/2011 10:42:36 AM: 220 DreamHost FTP Server 10/26/2011 10:42:36 AM: USER nodebunny 10/26/2011 10:42:36 AM: 331 Password required for ninjawww 10/26/2011 10:42:36 AM: PASS xxxxxxxx 10/26/2011 10:42:36 AM: 230 User nodebunny logged in 10/26/2011 10:42:36 AM: FEAT 10/26/2011 10:42:36 AM: 211-Features: LANG ja-JP.UTF-8;ja-JP;zh-TW;fr-FR;zh-CN;en-US*;bg-BG;ko-KR.UTF-8;ko-KR MDTM MFMT TVFS UTF8 MFF modify;UNIX.group;UNIX.mode; MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*; REST STREAM SIZE 211 End 10/26/2011 10:42:36 AM: OPTS UTF8 ON 10/26/2011 10:42:36 AM: 200 UTF8 set to on 10/26/2011 10:42:36 AM: PWD 10/26/2011 10:42:36 AM: 257 "/" is the current directory 10/26/2011 10:42:36 AM: PWD 10/26/2011 10:42:36 AM: 257 "/" is the current directory 10/26/2011 10:42:36 AM: CWD /dev/proj/nodebunny 10/26/2011 10:42:36 AM: 250 CWD command successful 10/26/2011 10:42:36 AM: PWD 10/26/2011 10:42:36 AM: 257 "/dev/proj/nodebunny/lib/Buffer" is the current directory 10/26/2011 10:42:36 AM: PWD 10/26/2011 10:42:37 AM: 257 "/dev/proj/nodebunny/lib/Buffer" is the current directory 10/26/2011 10:42:37 AM: TYPE I 10/26/2011 10:42:37 AM: 200 Type set to I 10/26/2011 10:42:37 AM: PORT 10,15,55,125,226,16 10/26/2011 10:42:37 AM: 200 PORT command successful 10/26/2011 10:42:37 AM: STOR Buffer.pm 10/26/2011 10:42:37 AM: 550 Buffer.pm: Overwrite permission denied

  Read the article

• Is it illegal to rewrite every line of an open source project in a slightly different way, and use it in a closed source project?

  - by Chris Barry

  There is some code which is GPL or LGPL that I am considering using for an iPhone project. If I took that code (JavaScript) and rewrote it in a different language for use on the iPhone would that be a legal issue? In theory the process that has happened is that I have gone through each line of the project, learnt what it is doing, and then reimplemented the ideas in a new language. To me it seems this is like learning how to implement something, but then reimplementing it separately from the original licence. Therefore you have only copied the algorithm, which arguably you could have learnt from somewhere else other than the original project. Does the licence cover the specific implementation or the algorithm as well? EDIT------ Really glad to see this topic create a good conversation. To give a bit more backing to the project, the code involved does some kind of audio analysis. I believe it is non-trivial to learn or implement, although I was prepared to embark on this task (I'm at the level where I can implement an FFT algorithm, and this was going to go beyond that.) It is a fairly low LOC script, so I didn't think it would be too hard to do a straight port. I really like the idea of rereleasing my port as well as using it in the application. I don't see any problem with that, and it would be a great way to give something back to the community. I was going to add a line about not wanting to discuss the moral issues, but I'm quite glad I didn't as it seems to have fired the debate a bit. I still feel a bit odd about using open source code to learn from. Does this mean that anything one learns from an open source project is not allowed to be used in a closed source project? And how long after or different does an implementation have to be to not be considered violation of the licence? Murky! EDIT 2 -------- Follow up question

  Read the article

• CodePlex Daily Summary for Wednesday, June 09, 2010

  CodePlex Daily Summary for Wednesday, June 09, 2010New Projects.NET Transactional File Manager: Transactional File Manager is a .NET API that supports including file system operations such as file copy, move, delete in a transaction. It's an i...3D World Studio Content Pipeline for Windows Phone 7: This is a port of PhotonicGames' project: http://xna3dws.codeplex.com/releases/view/42994 for the Windows Phone 7 tools (XNA 4.0 CTP).Advanced Script Editor for 3D Rad: Advanced Script Editor makes it easier for 3D Rad coders to write scripts. Developed in C#, it features a functions list, a favourites list, object...Ajax ASP.Net Forum: A fast & lightweight open source free forum developed in ASP.Net 3.5, AJAX, CSS, SQL & Javascript Cache (filter-sort-move through table records at ...Axon: Axon is the home automation system that I will be running in my home. It will be a collection of different technologies and projects, often experim...BigBallz: Projeto de site de Bolões para campeonatos diversos. A princípio pensado para copa do mundo de futebol de 2010BigfootMVC: MVC Framework for DotNetNukeBigfootSQL: A StringBuilder for SQL. BigfootSQL was built with simplicity in mind. It assumes that you are comfortable writing SQL but dislike effort required ...Bxf (Basic XAML Framework): Basic Xaml Framework (Bxf) is a simple, streamlined set of UI components designed to demonstrate the minimum framework functionality required to ma...elZerf - elektronische Zeiterfassung: elektronisches Zeiterfassungsystem im Rahmen der Seminararbeit im Modul Web-Anwendungsprogrammierung.IntoFactories.Net - Samples: Project to host samples created by members of the IntoFactories.NET Team blog.Lanchonete: Sistema para controle de lanchonetes. Medieval Dynasties: Medieval Dynasties is a game written in C# 3.5 and XNA 3.1 at the moment. It is inspired by Crusader Kings, Total War and Civilization.PMMsg: A project to replace the standard messaging client on the Windows Mobile platform. Mainly geared towards Windows Mobile 6.5.3 VGA devices. Also an...PunkPong: PunkPong is an open source "Pong" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard or mouse. This cross-platform a...Renegade Legion Fighter Calculator: In working on assigning fighters to squadrons, flights, and groups for a campaign, I was struck by the sheer amount of calculations I had to make. ...Sharpotify - Spotify .Net Library: Sharpotify is a Spotify library in C#. It is based in Jotify and SharPot projects. It is not a libspotify wrapper, It is a full .Net Spotify protoc...Silverlight load on demand with MEF: With MEF, a Silverlight control can be split in several packages(xap files). Each package can contain one or more pages and it will download on dem...SOLID by example: Source code examples to undestood solid design principles. Most of them were taken from http://www.lostechies.com/SQL Server 2008 Reporting Services RS.EXE Supporting Forms Authentication: A version of RS.EXE that you can use with Forms Authentication in Native Mode. Use the following arguments to specify credentials (just like Basic ...Stripper: Stripper Remove Diacritics and other unwanted caracter to fabric a more standardized file naming.study: studyUncoverPIC: UncoverPIC is a Silverlight Game strongly inspired to the famous Arcade Game "GalsPanic" (see http://en.wikipedia.org/wiki/Gals_Panic ). It was dev...Unity3D Untitled MMO: Unity3D Untitled MMO FrameworkUnnamedShop: UnnamedShopXBStudio.asp.net.automation: A Unit Testing Automation library for asp.netXBStudio.Web: XBStudio Web ApplicationNew Releases3D World Studio Content Pipeline for Windows Phone 7: Initial Release (0.1): This is the first release of the project, with plenty of hackery and kludges to go around, but it mostly works! Let me know if you hit any bugs.Acies: Acies - Alpha Build 0.0.10: Alpha release. Requires Microsoft XNA Framework Redistributable 3.1 (http://www.microsoft.com/downloads/details.aspx?FamilyID=53867a2a-e249-4560-...Advanced Script Editor for 3D Rad: Advanced Script Editor - Version 2.6: Despite various previous releases on the 3D Rad forum, this is the first release on CodePlex.Ajax ASP.Net Forum: First Release: First Release prior to CodePlex Publish (send to admins)So, it doesn't all finish VERSION: 0.1.2 FEATURES Main Home Where all the Forums (called ...Artist Follower for Microsoft Access: Artist Follower 0.5.1: Artists Follower changes: Just one form to manage artists and links!!!Artist Follower for Microsoft Access: Artists Follower 0.5.0: This is the first release of Artist Follower.ASP.NET MVC SiteMap provider - MvcSiteMapProvider: MvcSiteMapProvider 2.0.0 CTP1: This is a community technology preview of MvcSiteMapProvider version 2.0. It is not backwards compatible with older MvcSiteMapProvider versions. ...B&W Port Scanner: Black`n`White Port Scanner 4.0: Version 4 includes: - Improved vulnerability detection tools - Report Creation - Improved Stability - Much better port information database - Nume...BaseCalendar: BaseControls 1.1: BaseControls 1.1 contains the BaseCalendar ASP.NET control. Changes: Rendering TH by default inside THEAD. Added option (ShowMinNumWeeks) to r...BigfootSQL: BigfootSQL Source Code: BigfootSQL C# Version 01Commerce Server 2009 Orders using Pipelines in a Console Application: ConsoleApplication To PLace Orders: ConsoleApplication To PLace Orders with Commerce Server 2009 foundationCommunity Forums NNTP bridge: Community Forums NNTP Bridge V33: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V34: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...ContainerOne - C# application server: V0.1.2.0: New minor release containing: Integration test component for runtime testing Refactored and cleaned solution files First unit testsExtend SmallBasic: Teaching Extensions v.020: Moved Tortoise.approve to ProgramWindow.TakeScreenShot()fleet It: v0.06 Alpha: v0.06 Alpha - Features Caching implemented for fleets Various Bug fixes Implemented Settings. Resolved logical issue with Getting fleets U...Frotz.NET: Frotz.NET B2: In addition to B1 changes: - Added ZTools to enable debugging view of zcode files - Added rudimentary scroll back buffer. B1 Changes: - Got Adapt...FsObserver: FsObserver 2.0: This is basically the same as FsObserver 1.0 but the "-help" documentation has been cleaned up somewhat and the code has been refactored so that it...GPdotNET - Genetic Programming Tool: GPdotNETv1.0: GPdotNET v.1.0 - more details on http.bhrnjica.wordpress.com/gpdotnetHERB.IQ: Alpha 0.1 Source code release 8: Alpha 0.1 Source code release 8imdb movie downloader: myImdb 0.9.3: myImdb 0.9.3imdb movie downloader: myImdb 0.9.4: myImdb 0.9.4jccc .NET smart framework: jccc .NET smart framework version 1.2010.06.07: jccc .NET smart framework version 1.2010.06.07 added oracle databases supportLongBar: LongBar 2.1 Build 313: - Fixed library and updates to work with updated live services - Options: You can disable shadow nowMDownloader: MDownloader-0.15.17.59623: Fixed FileFactory provider. Improvied postpone policies. Added network request limiter.MediaCoder.NET: MediaCoder.NET v1.0 beta 1.1: Installer for MediaCoder.NET v1.0 beta1.1. It can now convert files with spaces in the path or filename. I have also created filter for the SaveFil...MediaCoder.NET: MediaCoder.NET v1.0 beta 1.1 Source Code: Source Code for MediaCoder.NET v1.0 beta 1.1.mesoBoard: mesoBoard - 0.9.1 beta: Fixed file download permissions Released under the New BSD License.MPCLI: Alpha Release (0.1.0.0): This release has core functionality and is considered a potential candidate for a feature complete release of this library. However, suggestions fo...N2 CMS: 2.0: N2 is a lightweight CMS framework for ASP.NET. It helps professional developers build great web sites that anyone can update. Major Changes (1.5 -...NHTrace: NHTrace-47571: NHTrace-47571NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.125: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NSoup: NSoup 0.2: NSoup 0.2 corresponds to jsoup version 1.1.1. List of changes can be viewed here.Opalis Community Releases: Integration Pack for Data Manipulation: The Integration Pack for Data Manipulation enables you to perform a wider variety of data manipulation tasks as well as aggregate data into common ...Performance Analysis of Logs (PAL) Tool: PAL v2.0 Beta 1: Fixed Counter Sorting: Fixed a minor bug where duplicate counter expression paths were not being removed. Analysis Added: Added LogicalDisk Read/...RoTwee: RoTwee (12.0.0.0): Trial version. 17925 Make it possible to change window sizeSharpotify - Spotify .Net Library: Sharpotify.Library 1.0: Sharpotify Library: Stable release. You can connect with spotify, search, browse (tracks, albums, artists), get a music stream, create and edit you...Silverlight load on demand with MEF: mal.Web.Silverlight.MEF 1.0.0.0: mal.Web.Silverlight.MEF 1.0.0.0sMAPtool: sMAPtool v0.7e (without Maps): + Added: color value expansion bar for hmap (right click to select color scheme) + Added: more complex hmap editing, uses now 4 point bounding rect...SQL Server 2008 Reporting Services RS.EXE Supporting Forms Authentication: Initial release: Enjoy!Stripper: Stripper 0.1.1 (CLi): Stripper Remove Diacritics and other unwanted caracters to fabric a more standardized file naming. Especially French caracter and maybe other lang...Unity3D Untitled MMO: v1: versionUrzaGatherer: UrzaGatherer 2.01a: New version with some minors bugs corrected.VCC: Latest build, v2.1.30608.0: Automatic drop of latest buildVCC: Latest build, v2.1.30608.1: Automatic drop of latest buildWatermarker.NET: 0.1.3811: A newer version with some improvements. I release this as a .zip archive, because settings are added here, so there will be .exe and .config files.Yet Another GPS: Alfa Release: Alfa working releaseMost Popular ProjectsDozer Enterprise Library for .NETEmployee Management SystemWiiMote PhysicsVisualStudio 2010 JavaScript OutliningSpider CompilerConcurrent CacheOil Slick Live FeedsCSUFVGDC Summer JamWinGetSiteMap Utility for DNN Blog ModuleMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRhyduino - Arduino and Managed CodejQuery Library for SharePoint Web ServicesRawrNB_Store - Free DotNetNuke Ecommerce Catalog ModuleAndrew's XNA HelpersBlogEngine.NETStyleCopCustomer Portal Accelerator for Microsoft Dynamics CRM

  Read the article

• Making Sense of ASP.NET Paths

  - by Renso

  Making Sense of ASP.NET Paths ASP.Net includes quite a plethora of properties to retrieve path information about the current request, control and application. There's a ton of information available about paths on the Request object, some of it appearing to overlap and some of it buried several levels down, and it can be confusing to find just the right path that you are looking for. To keep things straight I thought it a good idea to summarize the path options along with descriptions and example paths. I wrote a post about this a long time ago in 2004 and I find myself frequently going back to that page to quickly figure out which path I’m looking for in processing the current URL. Apparently a lot of people must be doing the same, because the original post is the second most visited even to this date on this blog to the tune of nearly 500 hits per day. So, I decided to update and expand a bit on the original post with a little more information and clarification based on the original comments. Request Object Paths Available Here's a list of the Path related properties on the Request object (and the Page object). Assume a path like http://www.west-wind.com/webstore/admin/paths.aspx for the paths below where webstore is the name of the virtual. Request Property Description and Value ApplicationPath Returns the web root-relative logical path to the virtual root of this app. /webstore/ PhysicalApplicationPath Returns local file system path of the virtual root for this app. c:\inetpub\wwwroot\webstore PhysicalPath Returns the local file system path to the current script or path. c:\inetpub\wwwroot\webstore\admin\paths.aspx Path FilePath CurrentExecutionFilePath All of these return the full root relative logical path to the script page including path and scriptname. CurrentExcecutionFilePath will return the ‘current’ request path after a Transfer/Execute call while FilePath will always return the original request’s path. /webstore/admin/paths.aspx AppRelativeCurrentExecutionFilePath Returns an ASP.NET root relative virtual path to the script or path for the current request. If in  a Transfer/Execute call the transferred Path is returned. ~/admin/paths.aspx PathInfo Returns any extra path following the script name. If no extra path is provided returns the root-relative path (returns text in red below). string.Empty if no PathInfo is available. /webstore/admin/paths.aspx/ExtraPathInfo RawUrl Returns the full root relative URL including querystring and extra path as a string. /webstore/admin/paths.aspx?sku=wwhelp40 Url Returns a fully qualified URL including querystring and extra path. Note this is a Uri instance rather than string. http://www.west-wind.com/webstore/admin/paths.aspx?sku=wwhelp40 UrlReferrer The fully qualified URL of the page that sent the request. This is also a Uri instance and this value is null if the page was directly accessed by typing into the address bar or using an HttpClient based Referrer client Http header. http://www.west-wind.com/webstore/default.aspx?Info Control.TemplateSourceDirectory Returns the logical path to the folder of the page, master or user control on which it is called. This is useful if you need to know the path only to a Page or control from within the control. For non-file controls this returns the Page path. /webstore/admin/ As you can see there’s a ton of information available there for each of the three common path formats: Physical Path is an OS type path that points to a path or file on disk. Logical Path is a Web path that is relative to the Web server’s root. It includes the virtual plus the application relative path. ~/ (Root-relative) Path is an ASP.NET specific path that includes ~/ to indicate the virtual root Web path. ASP.NET can convert virtual paths into either logical paths using Control.ResolveUrl(), or physical paths using Server.MapPath(). Root relative paths are useful for specifying portable URLs that don’t rely on relative directory structures and very useful from within control or component code. You should be able to get any necessary format from ASP.NET from just about any path or script using these mechanisms. ~/ Root Relative Paths and ResolveUrl() and ResolveClientUrl() ASP.NET supports root-relative virtual path syntax in most of its URL properties in Web Forms. So you can easily specify a root relative path in a control rather than a location relative path: <asp:Image runat="server" ID="imgHelp" ImageUrl="~/images/help.gif" /> ASP.NET internally resolves this URL by using ResolveUrl("~/images/help.gif") to arrive at the root-relative URL of /webstore/images/help.gif which uses the Request.ApplicationPath as the basepath to replace the ~. By convention any custom Web controls also should use ResolveUrl() on URL properties to provide the same functionality. In your own code you can use Page.ResolveUrl() or Control.ResolveUrl() to accomplish the same thing: string imgPath = this.ResolveUrl("~/images/help.gif"); imgHelp.ImageUrl = imgPath; Unfortunately ResolveUrl() is limited to WebForm pages, so if you’re in an HttpHandler or Module it’s not available. ASP.NET Mvc also has it’s own more generic version of ResolveUrl in Url.Decode: <script src="<%= Url.Content("~/scripts/new.js") %>" type="text/javascript"></script> which is part of the UrlHelper class. In ASP.NET MVC the above sort of syntax is actually even more crucial than in WebForms due to the fact that views are not referencing specific pages but rather are often path based which can lead to various variations on how a particular view is referenced. In a Module or Handler code Control.ResolveUrl() unfortunately is not available which in retrospect seems like an odd design choice – URL resolution really should happen on a Request basis not as part of the Page framework. Luckily you can also rely on the static VirtualPathUtility class: string path = VirtualPathUtility.ToAbsolute("~/admin/paths.aspx"); VirtualPathUtility also many other quite useful methods for dealing with paths and converting between the various kinds of paths supported. One thing to watch out for is that ToAbsolute() will throw an exception if a query string is provided and doesn’t work on fully qualified URLs. I wrote about this topic with a custom solution that works fully qualified URLs and query strings here (check comments for some interesting discussions too). Similar to ResolveUrl() is ResolveClientUrl() which creates a fully qualified HTTP path that includes the protocol and domain name. It’s rare that this full resolution is needed but can be useful in some scenarios. Mapping Virtual Paths to Physical Paths with Server.MapPath() If you need to map root relative or current folder relative URLs to physical URLs or you can use HttpContext.Current.Server.MapPath(). Inside of a Page you can do the following: string physicalPath = Server.MapPath("~/scripts/ww.jquery.js")); MapPath is pretty flexible and it understands both ASP.NET style virtual paths as well as plain relative paths, so the following also works. string physicalPath = Server.MapPath("scripts/silverlight.js"); as well as dot relative syntax: string physicalPath = Server.MapPath("../scripts/jquery.js"); Once you have the physical path you can perform standard System.IO Path and File operations on the file. Remember with physical paths and IO or copy operations you need to make sure you have permissions to access files and folders based on the Web server user account that is active (NETWORK SERVICE, ASPNET typically). Note the Server.MapPath will not map up beyond the virtual root of the application for security reasons. Server and Host Information Between these settings you can get all the information you may need to figure out where you are at and to build new Url if necessary. If you need to build a URL completely from scratch you can get access to information about the server you are accessing: Server Variable Function and Example SERVER_NAME The of the domain or IP Address wwww.west-wind.com or 127.0.0.1 SERVER_PORT The port that the request runs under. 80 SERVER_PORT_SECURE Determines whether https: was used. 0 or 1 APPL_MD_PATH ADSI DirectoryServices path to the virtual root directory. Note that LM typically doesn’t work for ADSI access so you should replace that with LOCALHOST or the machine’s NetBios name. /LM/W3SVC/1/ROOT/webstore Request.Url and Uri Parsing If you still need more control over the current request URL or  you need to create new URLs from an existing one, the current Request.Url Uri property offers a lot of control. Using the Uri class and UriBuilder makes it easy to retrieve parts of a URL and create new URLs based on existing URL. The UriBuilder class is the preferred way to create URLs – much preferable over creating URIs via string concatenation. Uri Property Function Scheme The URL scheme or protocol prefix. http or https Port The port if specifically specified. DnsSafeHost The domain name or local host NetBios machine name www.west-wind.com or rasnote LocalPath The full path of the URL including script name and extra PathInfo. /webstore/admin/paths.aspx Query The query string if any ?id=1 The Uri class itself is great for retrieving Uri parts, but most of the properties are read only if you need to modify a URL in order to change it you can use the UriBuilder class to load up an existing URL and modify it to create a new one. Here are a few common operations I’ve needed to do to get specific URLs: Convert the Request URL to an SSL/HTTPS link For example to take the current request URL and converted  it to a secure URL can be done like this: UriBuilder build = new UriBuilder(Request.Url); build.Scheme = "https"; build.Port = -1; // don't inject portUri newUri = build.Uri; string newUrl = build.ToString(); Retrieve the fully qualified URL without a QueryString AFAIK, there’s no native routine to retrieve the current request URL without the query string. It’s easy to do with UriBuilder however: UriBuilder builder = newUriBuilder(Request.Url); builder.Query = ""; stringlogicalPathWithoutQuery = builder.ToString();

  Read the article

• Ubuntu One file sync error: SSL Handshake

  - by Jay Ó Broin

  Ubuntu One repeatedly tries to sync my files but keeps disconnecting before anything is uploaded. Here are some of the messages from syncdaemon.log: 2012-01-08 12:12:34,068 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection started to host fs-2.ubuntuone.com, port 443. 2012-01-08 12:12:34,256 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection made. 2012-01-08 12:12:34,257 - ubuntuone.SyncDaemon.StorageClient - INFO - Connection made. 2012-01-08 12:13:08,832 - ubuntuone.SyncDaemon.StorageClient - INFO - Connection lost, reason: [Failure instance: Traceback (failure with no frames): <class 'OpenSSL.SSL.Error'>: [('SSL routines', 'SSL23_READ', 'ssl handshake failure')]]. 2012-01-08 12:13:08,833 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'protocol_version' failed with the error: [('SSL routines', 'SSL23_READ', 'ssl handshake failure')] 2012-01-08 12:13:08,844 - ubuntuone.SyncDaemon.ActionQueue - WARNING - Connection lost: [('SSL routines', 'SSL23_READ', 'ssl handshake failure')] 2012-01-08 12:13:38,550 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'WAITING' (queues WORKING connection 'With User With Network')>; queue: 1378; hash: 0) ---- 2012-01-08 12:15:08,870 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection started to host fs-2.ubuntuone.com, port 443. 2012-01-08 12:15:09,033 - ubuntuone.SyncDaemon.ActionQueue - INFO - Connection made. 2012-01-08 12:15:09,034 - ubuntuone.SyncDaemon.StorageClient - INFO - Connection made. 2012-01-08 12:15:33,676 - ubuntuone.SyncDaemon.StorageClient - INFO - Connection lost, reason: [Failure instance: Traceback (failure with no frames): <class 'OpenSSL.SSL.Error'>: [('SSL routines', 'SSL23_READ', 'ssl handshake failure')]]. 2012-01-08 12:15:33,677 - ubuntuone.SyncDaemon.ActionQueue - INFO - The request 'protocol_version' failed with the error: [('SSL routines', 'SSL23_READ', 'ssl handshake failure')] 2012-01-08 12:15:33,692 - ubuntuone.SyncDaemon.ActionQueue - WARNING - Connection lost: [('SSL routines', 'SSL23_READ', 'ssl handshake failure')] 2012-01-08 12:15:38,551 - ubuntuone.SyncDaemon.Main - NOTE - ---- MARK (state: <State: 'WAITING' (queues WORKING connection 'With User With Network')>; queue: 1378; hash: 0) ---- I'm using Ubuntu 11.10.

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Installation

  - by Stuart Brierley

  I have previsouly detailed the installation of MySQL, the configuration of MySQL and the installation of the ODBC Data Connector for MySQL.  The reason I needed to install and configure these servers was to provide a test environment for a BizTalk Server 2009 solution I am working on where BizTalk will be querying and populating a MySQL database. To do this I then needed to install and add the Community ODBC adapter from Two Connect: "The Community BizTalk Adapter for ODBC is based on the code that was first made available on GotDotNet a few years ago. TwoConnect has refreshed this code, added an installer, and tested it against the latest BizTalk editions. We are releasing the updates back to the BizTalk developer, user and partner community as part of our ongoing community intitiatives. This is the second adapter package that TwoConnect makes available to the community after the very succesful release of the BizTalk WSE 3 adapter a couple of years ago. This adapter is useful in all ODBC based integration scenarios. The following are the new features added and fixes made to the old code base on GotDotNet." Detailed below are the installation instructions for this adapter.  Downloading and running the installer will load up the splash screen. Next you need to select the installation location for the adapter. You then need to confirm the installation following which you will be shown the installation progress. Assuming all has gone well you should see the installation complete screen. Once the installation has completed successfully you will then need to add the adapter to your BizTalk Server.  To do this open the BizTalk Administration console, expand the Platform Settings and right click on Adapters then select New\Adapter. You should then be able to select the ODBC adapter and choose the display name for the adapter. This adapter will then be shown in the BizTalk Administration console. Next I will be looking at using the ODBC Adapter when: Generating schemas Creating a receive port Creating a send port

  Read the article

• Restrict SSL access for some paths on a apache2 server

  - by valmar

  I wanted to allow access to www.mydomain.com/login through ssl only. E.g.: Whenever someone accessed http://www.mydomain.com/login, I wanted him to be redirect to https://www.mydomain.com/login so it's impossible for him/her to access that site without SSL. I accomplished this by adding the following lines to the virtual host for www.mydomain.com on port 80 in /etc/apache2/sites-available/default: RewriteEngine on RewriteCond %{SERVER_PORT} ^80$ RewriteRule ^/login(.*)$ https://%{SERVER_NAME}/login$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" Now, I want to restrict using SSL for www.mydomain.com. That means, whenever someone accessed https://www.mydomain.com, I want him to be redirected to http://www.mydomain.com (for performance reasons). I tried this by adding the following lines to the virtual host of www.mydomain.com on port 443 in /etc/apache2/sites-available/default-ssl: RewriteEngine on RewriteCond %{SERVER_PORT} ^443$ RewriteRule ^/(.*)$ http://%{SERVER_NAME}/$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" But when I now try to access www.mydomain.com/login, I get an error message that the server has caused to many redirects. That does make sense. Obviously, the two RewriteRules are playing ping-pong against each other. How could I work around this?

  Read the article

• ODI - Creating a Repository in a 12c Pluggable Database

  - by David Allan

  To install ODI 11g into an Oracle 12c pluggable database, one way is to connect using a TNS string to the pluggable database service that is executing. For example when I installed my master repository, I used a JDBC URL such as; jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=mydbserver)(PORT=1522)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PDBORA12.US.ORACLE.COM)))   I used the above approach rather than the host:port:sid which is a common mechanism many users use to quickly get up and going. Below you can see the repository creation wizard in action, I used the 11g release and simply installed the master and work repository into my pluggable database. Be wise with your repository IDs, I simply used the default, but you should be aware that these are key in larger deployments. The database in 12c has much more tighter control on users and resources, so just getting the user creating with sufficient resource on tablespaces etc in 12c was a little more work. Once you have the repositories up and running, then the fun starts using the 12c features. More to come.

  Read the article

• Ougoing telnet: Unable to connect to remote host: Connection refused

  - by brendan

  I am trying to telnet from Ubuntu server (running Maverick) on ec2 to another machine I have set up not on ec2 - we'll call it "server-x". The two machines are connected via vpn. I can ping from the ec2 machine to server-x no problem. On another machine also on the vpn but also not on ec2 I can telnet to server-x without issue so it is accepting incoming connections on that port. But when I run telnet from the ubuntu instance to server-x I get : ubuntu@ip-10-111-11-11:~$ telnet 5.1.1.1 9143 Trying 5.1.1.1... telnet: Unable to connect to remote host: Connection refused Other telnets work like this: ubuntu@ip-10-111-11-11:~$ telnet imap.gmail.com 993 Trying 173.194.76.108... Connected to gmail-imap.l.google.com. Escape character is '^]'. I have disabled ufw on the ubuntu machine. Is there anything else that can be blocking this outgoing connection? I tried adding the outgoing port to iptables but I'm not certain I'm doing that right.

  Read the article

• Ubuntu 12.04 Not Recognising Arduino Uno

  - by John Fish

  I recently purchased an arduino uno from sparkfun, and attempted it with a fresh ubuntu 12.04 build. I installed the ide, and it seemed to work fine; I could write the sketches. However, when I plugged the arduino in, it appeared not to recognise it. I should also note that the arduino does draw power from the USB port, as the green "On" light is illuminated. The serial port arduino uno should be "assigned to" is /dev/ttyACM0. However, this did not exist, as upon running ls dev/tty*, I got the following results: /dev/tty /dev/tty23 /dev/tty39 /dev/tty54 /dev/ttyS10 /dev/ttyS26 /dev/tty0 /dev/tty24 /dev/tty4 /dev/tty55 /dev/ttyS11 /dev/ttyS27 /dev/tty1 /dev/tty25 /dev/tty40 /dev/tty56 /dev/ttyS12 /dev/ttyS28 /dev/tty10 /dev/tty26 /dev/tty41 /dev/tty57 /dev/ttyS13 /dev/ttyS29 /dev/tty11 /dev/tty27 /dev/tty42 /dev/tty58 /dev/ttyS14 /dev/ttyS3 /dev/tty12 /dev/tty28 /dev/tty43 /dev/tty59 /dev/ttyS15 /dev/ttyS30 /dev/tty13 /dev/tty29 /dev/tty44 /dev/tty6 /dev/ttyS16 /dev/ttyS31 /dev/tty14 /dev/tty3 /dev/tty45 /dev/tty60 /dev/ttyS17 /dev/ttyS4 /dev/tty15 /dev/tty30 /dev/tty46 /dev/tty61 /dev/ttyS18 /dev/ttyS5 /dev/tty16 /dev/tty31 /dev/tty47 /dev/tty62 /dev/ttyS19 /dev/ttyS6 /dev/tty17 /dev/tty32 /dev/tty48 /dev/tty63 /dev/ttyS2 /dev/ttyS7 /dev/tty18 /dev/tty33 /dev/tty49 /dev/tty7 /dev/ttyS20 /dev/ttyS8 /dev/tty19 /dev/tty34 /dev/tty5 /dev/tty8 /dev/ttyS21 /dev/ttyS9 /dev/tty2 /dev/tty35 /dev/tty50 /dev/tty9 /dev/ttyS22 /dev/tty20 /dev/tty36 /dev/tty51 /dev/ttyprintk /dev/ttyS23 /dev/tty21 /dev/tty37 /dev/tty52 /dev/ttyS0 /dev/ttyS24 /dev/tty22 /dev/tty38 /dev/tty53 /dev/ttyS1 /dev/ttyS25 Any help would be greatly appreciated.

  Read the article

• How do I get a CardScan 60 II working with SANE?

  - by TiuTalk

  I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

  Read the article

• Connecting MS SQL using freetds and unixodbc: isql - no default driver specified

  - by Dejan

  I am trying to connect to the MS SQL database using freetds and unixodbc. I have read various guides how to do it, but no one works fine for me. When I try to connect to the database using isql tool, I get the following error: $ isql -v TS username password [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect Have anybody already successfully established the connection to the MS SQL database using freetds and unixodbc on Ubuntu 12.04? I would really appreciate some help. Below is the procedure I used to configure the freetds and unixodbc. Thanks for your help in advance! Procedure First, I have installed the following packages sudo apt-get unixodbc unixodbc-dev freetds-dev tdsodbc and configured freetds as follows: --- /etc/freetds/freetds.conf --- [TS] host = SERVER port = 1433 tds version = 7.0 client charset = UTF-8 Using tsql tool I can successfully connect to the database by executing tsql -S TS -U username -P password As I need an odbc connection I configured odbcinst.ini as follows: --- /etc/odbcinst.ini --- [FreeTDS] Description = FreeTDS Driver = /usr/lib/x86_64-linux-gnu/odbc/libtdsodbc.so Setup = /usr/lib/x86_64-linux-gnu/odbc/libtdsS.so FileUsage = 1 CPTimeout = CPResuse = client charset = utf-8 and odbc.ini as follows: --- /etc/odbc.ini --- [TS] Description = "test" Driver = FreeTDS Servername = SERVER Server = SERVER Port = 1433 Database = DBNAME Trace = No Trying to connect to the database using isql tool with such a configuration results the following error: $ isql -v TS username password [IM002][unixODBC][Driver Manager]Data source name not found, and no default driver specified [ISQL]ERROR: Could not SQLConnect

  Read the article

• Restrict SSL access for some paths on a apache2 server

  - by valmar

  I wanted to allow access to www.mydomain.com/login through ssl only. E.g.: Whenever someone accessed http://www.mydomain.com/login, I wanted him to be redirect to https://www.mydomain.com/login so it's impossible for him/her to access that site without SSL. I accomplished this by adding the following lines to the virtual host for www.mydomain.com on port 80 in /etc/apache2/sites-available/default: RewriteEngine on RewriteCond %{SERVER_PORT} ^80$ RewriteRule ^/login(.*)$ https://%{SERVER_NAME}/login$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" Now, I want to restrict using SSL for www.mydomain.com. That means, whenever someone accessed https://www.mydomain.com, I want him to be redirected to http://www.mydomain.com (for performance reasons). I tried this by adding the following lines to the virtual host of www.mydomain.com on port 443 in /etc/apache2/sites-available/default-ssl: RewriteEngine on RewriteCond %{SERVER_PORT} ^443$ RewriteRule ^/(.*)$ http://%{SERVER_NAME}/$1 [L,R] RewriteLog "/var/log/apache2/rewrite.log" But when I now try to access www.mydomain.com/login, I get an error message that the server has caused to many redirects. That does make sense. Obviously, the two RewriteRules are playing ping-pong against each other. How could I work around this?

  Read the article

• Website hosted at home pingable from outside, but not browseable from outside

  - by Richard DesLonde

  I have a simple setup. Server at home has local I.P. 192.168.1.3 IIS is running on the server and the website is up. Windows firewall on the server has an exception rule for port 80 TCP Router has static I.P. XX.XXX.XX.XXX Router is forwarding TCP port 80 to 192.168.1.3 My domain registrar is my DNS host and is pointing to the static I.P. XX.XXX.XX.XXX of the router Here's what I can and can't do. I can browse the website from within my home network either by I.P. or domain name. I can ping the domain and the I.P. from outside the network (from a computer at work). I can't browse the website either by domain name or by I.P. Wierd. Why I can't browse my website? Incidentally, I wasn't sure this question was appropriate for SO, but after finding a few others similar to it on SO, and no comments on those questions saying anything about it being innapropriate, I decided I would post this question. Let me know if this is not appropriate for SO, or is more appropriate for another of the SE websites. Thanks!

  Read the article

• Nothing happens when I connect my Iphone 3G to my laptop

  - by Allwar

  Hi, how do i connect my iphone to my laptop (ubuntu 10.04) so that i can sync music and be able to look at it as a usb stick? (this is what I want to do but there is a problem.) When i connect it to my laptop nothing happens, it doesn't show up as an ikon or as a mass storage device. My Iphone runs 4.2.1 it's an Iphone 3G and it's not jailbroken for the moment, is that a problem? My laptop is an Asus 1201n ubuntu 10.04 (64-bits) Bus 002 Device 005: ID 05ac:1292 Apple, Inc. iPhone 3G I connected my Ipod Video (30 gb) and that one doesn't appear as well So I'm kind of stuck now. The problem probably lies in the system, because the usb port is working. Bus 002 Device 006: ID 05ac:1209 Apple, Inc. iPod Video I have added this PPA, I have done all of the sudo update and upgrade. but my computer doesn't realize that my Iphone is connected, whish isn't related to libimobiledevice. The port is working fine, it's my computer it doesn't recognize that I have my Iphone plugged-in! and the phone is working (tested it on my mac). I have the latest versions of these programs: hipo, ipod, gtkpod, ifuse, libusmuxd1 and usbmxd. I try to mount my iphone with fuse but i got this error. ( I connected my iPhone in windows 7 and it worked annoyingly.) alvar@alvars-laptop:~$ ifuse /mnt/iphone/ ERROR: the mount point specified does not exist

  Read the article

• Consistency of an object

  - by Stefano Borini

  I tend to keep my objects consistent during their lifetime. In some cases, setting up an object requires multiple calls to different routines. For example, a connection object may operate in this way: Connection c = new Connection(); c.setHost("http://whatever") c.setPort(8080) c.connect() please note this is just a stupid example to let you understand the point. In between calls to setHost and setPort the object is inconsistent, because the Port has not been specified yet, so this code would crash Connection c = new Connection(); c.setHost("http://whatever") c.connect() Meaning that it's a requisite for connect() to have previous calls to both setHost and setPort, otherwise it won't be able to operate as its state is inconsistent. You may fix the issue with a default value, but there may be cases where no sensible default may be devised. We assume in the later example that there's no default for the port, and therefore a call to c.connect() without first calling both setHost and setPort will be an inconsistent state of the object. This, to me, points at an incorrect interface design, but I may be wrong, so I want to hear your opinion. Do you organize your interface so that the object is always in a consistent (i.e. workable) state both before and after the call ? Edit: Please don't try to solve the problem I gave above. I know how to solve that. My question is much broader in sense. I am looking for a design principle, officially or informally stated, regarding consistency of object state between calls.

  Read the article

• Lenovo Ideapad 205 and Ubuntu 12.04 LTS

  - by Oranges

  I just wanted to report one thing, because I know there are a lot of Ideapad S205 users out there, that had issues running Ubuntu on their Lenovo Ideapad S205 in the past. Lenovo Ideapad with Ubuntu 12.04 LTS: Everything works out of the box. I just installed it and everything, including the microphone, the webcam, the WLAN, the AMD E-350 CPU/GPU and the sound worked right away. In other words: Everything works. Even the AMD E-350 GPU works very well with the Open Source drivers and with the prop. drivers. The prop. drivers were automatically offered to me via Ubuntu itself. It works great. A long idea, written short: I love it. It's extremly stable and very fast. I am using the German version of the Idepad S205, combined with the 32bit version of Ubuntu. There is only one, single thing to keep in mind when installing Ubuntu on the S205: Plugin your USB/CD/DVD drive in the left USB-Port. I don't know why, but it only works with the USB-Port on the left side of the Netbook. This is only for installing Ubuntu. After it has been installed and updated successfully, all of the USB ports will work. Oranges - feedback on Lenovo S205 with Ubuntu 12.04 LTS.

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Receive Location

  - by Stuart Brierley

  I have previously talked about the installation of the Community ODBC adapter and also using the ODBC adapter to generate schemas.  But what about creating a receive location? An ODBC receive location will periodically poll the configured database using the stored procedure or SQL string defined in your request schema. If you need to, begin by adding a new receive port to your BizTalk configuration. Create a new receive location and select to use the ODBC adapter and click Address. You will now be shown the ODBC Community Adapter Transport properties window.  Select connection string and you will be shown the Choose data Source window.  If you have already created the Test Database source when generating a schema from ODBC this will be shown (if not go and take a look in my previous post to see how this is done).   You will then need to choose the SQL command that will be run by the recieve port.  In this case I have deployed the Test Mapping schemas that I created previously and selected the Request schema. You should now have populated the appropriate properties for the ODBC Com Adapter. Finally set the standard receive location properties and your ODBC receive location is now ready.

  Read the article

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• How do I get a rt2800usb wireless device working?

  - by Jii

  My brand new desktop running 13.04 has endless problems with wireless. Dozens of others are flooding forums with reports of the same problems. It worked fine for a few days, then there were a few days where it started having problems sometimes and working sometimes. Now it never works at all. I have 5+ devices all able to connect without any trouble at all, including iPhone, Android phone, 3DS, multiple game consoles, a laptop running windows 7, and even a second desktop machine running Ubuntu 12.04 sitting right behind the 13.04 machine. All other devices have full wireless bars displayed (strong signals). At any moment, one of the following is happening, and it changes randomly: Trying to connect forever, but never establishing a connection. Wireless icon constantly animating. Finds no wireless networks at all. (There are 12+ in range according to other devices.) Will not try to connect to the network. If I use the icon to connect, it will display "Disconnected" within a few seconds. Will continuously ask for the network password. Typing it in correctly does not help. Wireless is working fine. This happens sometimes. It can work for days at a time, or only 10 mins at a time. Various things that usually do nothing but sometimes fix the problem: Reboot. This has the best chance of helping, but it usually takes 5+ times. Disable/re-enable Wi-Fi using the wireless icon. Disable/re-enable Networking using the wireless icon. Use the icon to try and connect to a network (if found). Use the icon to open Edit Connections and delete my connection info, causing it to be recreated (once it's actually found again). Various things that seem to make no difference: Changing between using Linux headers in grub at bootup, between 3.10.0, 3.9.0, or 3.8.0. Move the wireless router very close to the desktop. Running sudo rfkill unblock all (I dunno what this is supposed to do.) I've used Ubuntu for 6 years and I've never had a problem with networking. Now I'm spending all my time reading through endless problem reports and trying all the answers. None of them have helped. I am doing this instead of getting work done, which is defeating the whole purpose of using Ubuntu. It's heartbreaking to be honest. In the current state of "no networks are showing up", here are outputs from the random things that other people are usually asked to run: lspic 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) lsmod Module Size Used by e100 41119 0 nls_iso8859_1 12713 1 parport_pc 28284 0 ppdev 17106 0 bnep 18258 2 rfcomm 47863 12 binfmt_misc 17540 1 arc4 12573 2 rt2800usb 27201 0 rt2x00usb 20857 1 rt2800usb rt2800lib 68029 1 rt2800usb rt2x00lib 55764 3 rt2x00usb,rt2800lib,rt2800usb coretemp 13596 0 mac80211 656164 3 rt2x00lib,rt2x00usb,rt2800lib kvm_intel 138733 0 kvm 452835 1 kvm_intel cfg80211 547224 2 mac80211,rt2x00lib crc_ccitt 12707 1 rt2800lib ghash_clmulni_intel 13259 0 aesni_intel 55449 0 usb_storage 61749 1 aes_x86_64 17131 1 aesni_intel joydev 17613 0 xts 12922 1 aesni_intel nouveau 1001310 3 snd_hda_codec_hdmi 37407 1 lrw 13294 1 aesni_intel gf128mul 14951 2 lrw,xts mxm_wmi 13021 1 nouveau snd_hda_codec_realtek 46511 1 ablk_helper 13597 1 aesni_intel wmi 19256 2 mxm_wmi,nouveau snd_hda_intel 44397 5 ttm 88251 1 nouveau drm_kms_helper 49082 1 nouveau drm 295908 5 ttm,drm_kms_helper,nouveau snd_hda_codec 190010 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hwdep 13613 1 snd_hda_codec snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel btusb 18291 0 snd_page_alloc 18798 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 i2c_algo_bit 13564 1 nouveau snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30417 1 snd_seq_midi snd_seq 61930 2 snd_seq_midi_event,snd_seq_midi bluetooth 251354 22 bnep,btusb,rfcomm snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi lpc_ich 17060 0 snd_timer 29989 2 snd_pcm,snd_seq mei 46588 0 snd 69533 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device psmouse 97838 0 microcode 22923 0 soundcore 12680 1 snd video 19467 1 nouveau mac_hid 13253 0 serio_raw 13215 0 lp 17799 0 parport 46562 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 47346 0 hid 101248 2 hid_generic,usbhid ahci 30063 3 libahci 32088 1 ahci e1000e 207005 0 ptp 18668 1 e1000e pps_core 14080 1 ptp sudo lshw -c network 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) sudo iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on sudo iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results NOTE: This dmesg was done after a reboot where the network manager was continuously displaying the "disconnected" message over and over. So it must have been trying to connect at this time. My network was displayed in the list of options, as the only option despite other devices picking up 12+ access points. The router channel is set to auto. dmesg | tail -30 [ 187.418446] wlan0: associated [ 190.405601] wlan0: disassociated from 00:14:d1:a8:c3:44 (Reason: 15) [ 190.443312] cfg80211: Calling CRDA to update world regulatory domain [ 190.443431] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 190.451635] cfg80211: World regulatory domain updated: [ 190.451643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 190.451648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451652] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.824451] wlan0: authenticate with 00:14:d1:a8:c3:44 [ 191.850608] wlan0: send auth to 00:14:d1:a8:c3:44 (try 1/3) [ 191.884604] wlan0: send auth to 00:14:d1:a8:c3:44 (try 2/3) [ 191.886309] wlan0: authenticated [ 191.886579] rt2800usb 3-5.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 191.886588] rt2800usb 3-5.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 191.889556] wlan0: associate with 00:14:d1:a8:c3:44 (try 1/3) [ 192.001493] wlan0: associate with 00:14:d1:a8:c3:44 (try 2/3) [ 192.040274] wlan0: RX AssocResp from 00:14:d1:a8:c3:44 (capab=0x431 status=0 aid=3) [ 192.044235] wlan0: associated [ 193.948188] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 193.981501] cfg80211: Calling CRDA to update world regulatory domain [ 193.984080] cfg80211: World regulatory domain updated: [ 193.984082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 193.984084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) The router uses MAC filtering, and security is WPA PSK with cipher as auto. So, any ideas? Or is the solution just to not use 13.04 unless you have a wired connection? (I don't have this option.) If so, please just tell me straight. I survived 9.04 Jaunty, and I can survive 13.04 Raring. Update #1 Results from trying Wild Man's first answer: jii@conan:~$ echo "options rt2800usb nohwcrypt=y" | sudo tee /etc/modprobe.d/rt2800usb.conf options rt2800usb nohwcrypt=y jii@conan:~$ sudo modprobe -rfv rt2800usb rmmod rt2800usb rmmod rt2800lib rmmod crc_ccitt rmmod rt2x00usb rmmod rt2x00lib rmmod mac80211 rmmod cfg80211 jii@conan:~$ sudo modprobe -v rt2800usb insmod /lib/modules/3.10.0-031000-generic/kernel/lib/crc-ccitt.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko nohwcrypt=y I tried: gksudo gedit /etc/pm/power.d/wireless but I didn't have the package. It said to install gksu. I tried that, but of course, not having Internet, I didn't get the package. So instead I did: sudo gedit /etc/pm/power.d/wireless Which created the file. Here is the body: #!/bin/sh /sbin/iwconfig wlan0 power off I then rebooted. No change. I tried adding exit 0 to the bottom of the wireless file, and rebooted. No change. Please note that this is a desktop machine. I'm assuming power management is primarily for laptops, but the iwconfig does state that power management is on, so who knows. The recommended router changes I did not do, since the current router settings are (I think) required for some of the older devices I have, and because the current settings work on all my modern devices including Ubuntu 12.04 and Windows 7. I do appreciate the advice though, and I'll look into it when I have time. Anything else to try? Update #2 I booted into Ubuntu 12.04.3 from a dvd, and the same problems exist. I have a separate old desktop machine with 12.04 installed that has no wireless problems at all. So obviously the problem is wireless hardware compatibility in both 12.04.03 LTS and 13.04. Update #3 The same problems exist even when using a wired connection. I plugged an ethernet cable directly to the router and the network manager added an "Auto Ethernet" entry, but it cannot establish a connection to it. So the problem is not specific to wireless. Meanwhile, I purchased a Trendnet N300 wireless USB adapter, TEW-664UB. I plugged it in, but I have no idea how to get Ubuntu to try and use it. Can anyone tell me how? Can I download a package on another computer and copy the .deb over to do an install, etc? I'm installing windows 7 to double check that the internet connection works there and it's not just some magically faulty hardware. Thanks for your help.

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >