Search Results

Search found 49486 results on 1980 pages for 'remote working'.

Page 159/1980 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• How to get AMD Catalyst working on Arch x86_64

  - by gh403

  I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

  Read the article

• Site stopped working after adding NIC card

  - by Sachin Kainth

  My boss made a bit of blunder yesterday, he added a secondary NIC card to the a machine hosting a website so that it could be part of the local network. He also added it to the <blah>.local domain (which all our servers are being added too). The website failed following this. He thought this was because the machine was now called <blahblah>.<blah>.local, so he removed it from the domain and restarted. Same problem a asp.net error, something to do with a binding error. Sorry he didn’t make a note of it. He traced it back to the WCF services that are running on the site. Anyway, it looks like ASP.NET gets confused connecting to the database when there’s multiple network cards. The 173.x.x.x IP address (which is internal), doesn’t route to the internet.. Therefore it’s trying to connect via the wrong network. Any ideas about how to resolve it?

  Read the article

• custom route not working on windows

  - by Michael Closson

  My windows laptop is directly connected to 192.168.1.0/24 (wireless lan). I access 10.21.0.0/16 though a router that is connected to both networks. The routing works fine with this configuration. I have a VPN, that connects to 10.0.0.0/8. The VPN network doesn't actually use any IPs in the 10.21.0.0/16 range. So I should be able to configure my routing table to route all the 10.21.0.0/16 IPs through the wireless lan, and all other 10.0.0.0/8 through the VPN. My understanding is that I can do this if the metric for the 10.21.0.0 is lower than that of the 10.0.0.0. The VPN (10.0.0.0) is automatically assigned metric 20. I have manually assigned the WLAN a metric of 1. I manually add an entry to the routing table with this command: route add 10.21.0.0 mask 255.255.0.0 192.168.1.201 metric 1 The route is then assigned a metric of 2 (which is expected). The problem is that it doesn't work. I can't ping any machine on the 10.21.0.0 network. But I can access other stuff on the 10.0.0.0. I can also access stuff on the 192.168.1.0. To debug this i've done the following. Run tcpdump on the router (192.168.1.201). I can verify that no packets for 10.21.0.0 arrive on that interface. Disable iptables on the router. Disable the windows firewall. Run wireshark on my laptop, to try and see which interface the ping requests go to. But I can't see them go anywhere!! The ping command doesn't receive any 'destination unreachable' messages. Here is the relevant section of the routing table. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.18 2 10.0.0.0 255.0.0.0 On-link 10.55.44.203 20 10.21.0.0 255.255.0.0 192.168.1.201 192.168.1.18 2

  Read the article

• iPhone in App purchase : Working but Not

  - by Vimal Jain

  Hi, I have added in App purchase functionality within my application. We have tested it successfully on iPhone (in sandbox mode). After successfully testing, we sent the application for final testing to tester situated at other country. In strange case, the tester is not able to test in App purchase functionality. He is getting "Invalid Product Id" error. We are giving same build to tester which is working perfectly at our side. The whole application is working perfectly except in app purchase functionality. If any guesses. Thanks, Vimal Jain.

  Read the article

• remote database connection with my iphone application using cocos2d

  - by Rana

  MCPResult *theResult; MCPConnection *mySQLConnection; //initialize connection string vars NSString *dbURL = @"192.168.0.16"; NSString *userName = @""; NSString *pass = @""; int port = 3306; //open connection to database mySQLConnection = [[MCPConnection alloc] initToHost: dbURL withLogin:userName password:pass usingPort:port]; if ([mySQLConnection isConnected]) { NSLog(@"The connection to database was successfull"); } else { NSLog(@"The connection to database was failed"); } //selection to database if([mySQLConnection selectDB:@"blackjack_DB"]) { NSLog(@"Database found"); } else { NSLog(@"Database not found"); } //selection to Table theResult = [mySQLConnection queryString:@"select * from test"]; //theResult = [mySQLConnection queryString:@"select * from test where id='1'"]; //theResult = [mySQLConnection queryString:@"select id from test"]; //theResult = [mySQLConnection queryString:@"select name from test where pass='main_pass'"]; NSArray *m= [theResult fetchRowAsArray]; NSLog(@"%@", m); NSLog(@"%@", [m objectAtIndex:2]); Use this code for connecting & receive information from remotedatabase. And also use some framework. AppKit.framework, Cocoa.framework, Carbon.framework, MCPKit_bundled.framework. But stile i didn't connect my application with remort database.

  Read the article

• Apache2 on Raspbian: Multiviews is enabled but not working [closed]

  - by Christian L

  I recently moved webserver, from a ubuntuserver set up by my brother (I have sudo) to a rasbianserver set up by my self. On the other server multiviews worked out of the box, but on the raspbian it does not seem to work althoug it seems to be enabled out of the box there as well. What I am trying to do is to get it to find my.doma.in/mobile.php when I enter my.doma.in/mobile in the adress field. I am using the same available-site-file as I did before, the file looks as this: <VirtualHost *:80> ServerName my.doma.in ServerAdmin [email protected] DocumentRoot /home/christian/www/do <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/christian/www/do> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> From what I have read various places while googling this issue I found that the negotiation module had to be enabled so I tried to enable it. sudo a2enmod negotiation Giving me this result Module negotiation already enabled I have read through the /etc/apache2/apache2.conf and I did not find anything in particular that seemed to be helping me there, but please do ask if you think I should post it. Any ideas on how to solve this through getting Multiviews to work?

  Read the article

• pure-ftpd debian, can't get www-data user working

  - by lynks

  I'm trying to add FTP access to the apache web files, in the past I have done this with an ftpuser and group arrangement. This time I would like to make it possible to login directly as www-data (the default apache user on debian) to make things a bit cleaner. I have checked and re-checked all the common issues; MinUID is set to 1 (www-data has uid 33) www-data has shell set to /bin/bash in /etc/passwd PAMAuthentication is off UnixAuthentication is on I have restarted pure-ftpd using /etc/init.d/pure-ftpd restart My resulting pure-ftpd run is; /usr/sbin/pure-ftpd -l unix -A -Y 1 -u 1 -E -O clf:/var/log/pure-ftpd/transfer.log -8 UTF-8 -B My syslog contains; Oct 7 19:46:40 Debian-60-squeeze-64 pure-ftpd: ([email protected]) [WARNING] Can't login as [www-data]: account disabled And my ftp client is giving me; 530 Sorry, but I can't trust you Am I missing something obvious?

  Read the article

• MacBook's Airport not working from menu bar

  - by not22

  All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

  Read the article

• WOL not working with two NIC's

  - by amazinghorse24

  We have recently moved from a windows 2003 server to an 08 R2. Running the program from the command line says that the magic packet has successfully been sent but it never actually reached the destination computer. We have two NIC's on the server. If I disable the NIC that isn't (currently) in use, WOL will work fine, but in the future we will need to use both NIC's. Also, we use MAC Addresses for WOL.

  Read the article

• KVM/Libvirt bridged/routed networking not working on newer guest kernels

  - by SharkWipf

  I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

  Read the article

• 2Wire USB Network Adapter Not Working With Windows 7

  - by Andrew

  I installed Windows 7 on a separate drive, and everything works fine, but I can't get the above network adapter to work properly. It's displayed in Device Manager as a USB device, and I have the driver that makes it function in Vista, but when I run the Driver Wizard and direct it to directory where I have the Vista driver, it almost immediately says "Can't install driver." Is there any work around to this?

  Read the article

• pam_filter usage prevent passwd from working

  - by Henry-Nicolas Tourneur

  Hello everybody, I have PAM+LDAP SSL running on Debian Lenny, it works well. I always want to restrict who's able to connect, in the past I used pam_groupdn for that but I recently got a situation where I has to accept 2 different groups. So I used pam_filter like this : pam_filter |(groupattribute=server)(groupattribute=restricted_server) The problem is that with this statement, passwd doesn't work anymore with LDAP accounts. Any idea why ? Please find hereby some links to my config files : Since serverfault.com only allow me to post 1 link, please find hereunder the link to other conf files : http://pastebin.org/447148 Many thanks in advance :)

  Read the article

• CIFS(Samba) + ACL = not working

  - by tst

  I have two servers with Debian 5.0. server1: samba 2:3.2.5-4lenny9 smbfs 2:3.2.5-4lenny9 smb.conf: [test] comment = test path = /var/www/_test/ browseable = no only guest = yes writable = yes printable = no create mask = 0644 directory mask = 0755 server1:~# mount | grep sda3 /dev/sda3 on /var/www type ext3 (rw,acl,user_xattr) # getfacl /var/www/_test/ # file: var/www/_test/ # owner: www-data # group: www-data user::rwx group::rwx other::r-x default:user::rwx default:user:www-data:rw- default:user:testuser:rw- default:group::rwx default:mask::rwx default:other::r-x server2: samba-common 2:3.2.5-4lenny9 smbfs 2:3.2.5-4lenny9 server2:~# mount.cifs //server1/test /media/smb/test -o rw,user_xattr,acl server2:~# mount | grep test //server1/test on /media/smb/test type cifs (rw,mand) server2:~# getfacl /media/smb/test/ # file: media/smb/test/ # owner: www-data # group: www-data user::rwx group::rwx other::r-x default:user::rwx default:user:www-data:rw- default:user:testuser:rw- default:group::rwx default:mask::rwx default:other::r-x And there is the problem: server2:~# su - testuser (reverse-i-search)`touch': touch 123 testuser@server2:~$ touch /media/smb/ testuser@server2:~$ touch /media/smb/test/123 touch: cannot touch `/media/smb/test/123': Permission denied Whats wrong?!

  Read the article

• TAB completion not working in ubuntu hardy heron

  - by Tutul

  I have recently installed ubuntu hardy and found that shell command completion with TAB doesn't work, the package 'bash-completion' is installed in my system. I guess it is related to dash being the default shell? Is there a way to use tab completion in dash? If there isn't a way then how can i change my default shell to bash?

  Read the article

• Rsyslog mail module not working

  - by Henry-Nicolas Tourneur

  Hi *, I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

  Read the article

• Apache KeepAlive in child location not working

  - by Mark Beaton

  I'm trying to turn keep-alive connections off for a requests to a child folder in Apache, but when I reload the config I get the following error: KeepAlive not allowed here Here's my vhost config: <VirtualHost *:80> ServerAdmin [email protected] ServerName example.com DocumentRoot /srv/www/mysite DirectoryIndex index.html <Location /subfolder> KeepAlive Off </Location> </VirtualHost> I've tried using <Directory> as well, but no go there either. Any ideas? I'd rather not turn keep-alive off for the whole site...

  Read the article

• why did preview stop working from firefox?

  - by kloop

  I just installed adobe reader, and now when I click on a PDF in the browser, it is not opened in preview. Adobe doesn't work either, and I am stuck without having the PDF viewed at all. I right clicked on a PDF, and preview is still my default viewer. So this: http://www.ehow.com/how_6764524_make-preview-default-pdf-viewer.html is not helping. Any ideas? I want to be able to use Preview in Firefox.

  Read the article

• SElinux stopping LVS from working with https

  - by J Hoskins

  LVS/piranha is setup and trying to get it to balance https instead of http. Setup https testing with wget - idea from this link. Works when I do it at the command prompt. With SELinux enforcing, the wget fails to run due to the lack of access to /dev/random. (Error - Could not seed PRNG; consider using --random-file. Disabling SSL due to encountered errors.) wget runs as system_u:system_r:piranha_lvs_t:s0 but the file/device /dev/random has system_u:object_r:random_device_t:s0 Also, wget is trying to getattr and read. How do you allow wget to use /dev/random so it will do ssl?

  Read the article

• IIS7 Default Document not working

  - by TooFat

  I have a website running on IIS 7 that has the default document on the Web Site Level set to only index.php. If I right click on the Web Site in IIS Manager and select Explore I see that the index.php file is there. If I just browse to the web site like http://my.site.com I get the default IIS 7 logo with "Welcome" in a bunch of diff languages. If I go to http://my.site.com/index.php it brings up the site just fine. I have stopped and started the Web Site and ran iisreset but still no luck. The Default Document Section of Web.config looks like this <defaultDocument> <files> <clear /> <add value="index.php" /> </files> </defaultDocument> What am I missing?

  Read the article

• ADMIN$ and other shares not working remotely on XP machines

  - by makerofthings7

  I'm trying to use ADMT to migrate several XP machines to a new domain and the utility (nor command line) is able to access the admin$ share or any drive share. I've added the required registry key (HKCurrent\Services\LanMan\Param) for both servers and workstation admin sharing, rebooted the PC and still am unable to access it. How can I access the admin share on these PCs? If it helps, this machine used to have McAfee installed, and the Windows firewall enabled. I stoppped both of them and the machine is still not allowing me to access it remotely by a drive$ share.

  Read the article

• Adduser not working on kde ubuntu

  - by c0mrade

  When I use adduser or useradd from console to add users I can't login when using KDE, how do I add the to be able to use KDE as well, for now I have KDE access with only one user which I used to install kubuntu with sudo. What can I do so that users can login in KDE?

  Read the article

• Windows 8 auto-hibernate from sleep not working on Retina MacBook Pro

  - by frenchglen

  I have a similar question to this one. Only my context is the 15" Retina MacBook Pro - and Windows 8. I have just the original Mac OS X Mountain Lion on there, then Windows 8 via Bootcamp. no rEFIt installed. (I just press ALT every time I restart windows, actually as a security measure to stop tech-unsavvy thugs, who, if the laptop is stolen, think it's only a mac and don't discover my Windows as quickly as they would've, and by that time I remotely activate various anti-theft mac apps and nab them that way). SO: like the related question asks, why isn't it behaving like it should? The Windows 7 FAQ states: Will sleep eventually drain my laptop battery? If your laptop battery charge gets critically low while the computer is asleep, Windows automatically puts the laptop into hibernation mode. But this is just not happening - on my rMBP Windows 8. It seems EVERY time I set the laptop to sleep (when it reaches 10%), then arriving home and plugging it in and hoping to simply resume my work, it does NOT save the session to disk and I lose ALL my work. Who's fault is it? Win 8's (a bug, grr)? Or Apple's EFI system (maybe fixable via editing EFI options/do I have to install refit to make it work perhaps?) Or maybe changing windows power options can somehow fix the problem? Thanks for your help.

  Read the article

• How can I bridge a VM to a remote network?

  - by asciiphil

  I have a system running QEMU/KVM (via libvirt). One of its VMs needs to have a presence on a subnet that is not local to the VM host. I have a Linux system on the remote subnet. Is there a way to set up some sort of tunneled bridge to cause the VM to appear present on the remote system? This will be a temporary situation (hopefully just until the VM owner can configure their system) and network performance and long-term maintainability aren't really issues. To give some more concrete information: My VM host has IP address 192.168.54.155/24. The VM has IP address 192.168.65.71/24. I have a remote system at 192.168.65.254/24. Both the VM host and remote system are running Scientific Linux 6.5. I do not control the network or routing in between the VM host and remote system. I do not have access to the guest OS on the VM. I would like traffic to the VM's IP address to end up at the VM even though its host isn't directly connected to the appropriate network. I've tried using iproute2's tunnelling, but Linux won't let me add a tunnel to a bridge. I've considered using some sort of iptables mangling to route traffic over the tunnel and make the VM think it's on the right network, but I'm not sure whether there are better approaches. What's the best way to accomplish this hack?

  Read the article

• Remote access to Sharepoint's userprofileservice

  - by v0id

  Is there any way to use Sarepoint's userprofileservice webservice from computer which is not on the sharepoint's domain? I'v tried to use admin login, but failed with: Server was unable to process request. --- Attempted to perform an unauthorized operation.

  Read the article

• Ubuntu 11.10 Virtual-box Unity 3D not working

  - by naveen

  After struggling for four hours, I still cannot get Unity 3D of Gnome 3 to work on my VirtualBox - I have been pouring through Internet and forum posts but to no avail. Here's what I've done so far: VirtualBox 4.1.4r74921 on Windows 7 Installed Ubuntu Desktop 11.10 ( 32 bit ) Enabled 3D acceleration Allocated 1.5GB of RAM Allocated 50MB video memory (hope this is not the culprit) Installed Guest edition 4.1.4 Did apt-get update and apt-get upgrade Booted back in to Ubuntu - falls back to Unity 2D Shared folder, mouse integration all works, so guest edition is properly installed Tried the command and below is the output /usr/lib/nux/unity_support_test –p OpenGL vendor string: Mesa Project OpenGL renderer string: Software Rasterizer OpenGL version string: 2.1 Mesa 7.11 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I am trying to find what the "no" means but cannot find any good answers. Inter Core i5 processor 4GB of RAM on the host Display adapter: NVIDIA GeForce 8400GS Is anyone else facing the same problem? If so, can you point me to a solution or any reference where I can find a solution?

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >