Search Results

Search found 8343 results on 334 pages for 'split dns'.

Page 159/334 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• Cisco PIX 8.0.4, static address mapping not working?

  - by Bill

  upgrading a working Pix running 5.3.1 to 8.0.4. The memory/IOS upgrade went fine, but the 8.0.4 configuration is not quite working 100%. The 5.3.1 config on which it was based is working fine. Basically, I have three networks (inside, outside, dmz) with some addresses on the dmz statically mapped to outside addresses. The problem seems to be that those addresses can't send or receive traffic from the outside (Internet.) Stuff on the DMZ that does not have a static mapping seems to work fine. So, basically: Inside - outside: works Inside - DMZ: works DMZ - inside: works, where the rules allow it DMZ (non-static) - outside: works But: DMZ (static) - outside: fails Outside - DMZ: fails (So, say, udp 1194 traffic to .102, http to .104) I suspect there's something I'm missing with the nat/global section of the config, but can't for the life of me figure out what. Help, anyone? The complete configuration is below. Thanks for any thoughts! ! PIX Version 8.0(4) ! hostname firewall domain-name asasdkpaskdspakdpoak.com enable password xxxxxxxx encrypted passwd xxxxxxxx encrypted names ! interface Ethernet0 nameif outside security-level 0 ip address XX.XX.XX.100 255.255.255.224 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.68.1 255.255.255.0 ! interface Ethernet2 nameif dmz security-level 10 ip address 192.168.69.1 255.255.255.0 ! boot system flash:/image.bin ftp mode passive dns server-group DefaultDNS domain-name asasdkpaskdspakdpoak.com access-list acl_out extended permit udp any host XX.XX.XX.102 eq 1194 access-list acl_out extended permit tcp any host XX.XX.XX.104 eq www access-list acl_dmz extended permit tcp host 192.168.69.10 host 192.168.68.17 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq 5901 access-list acl_dmz extended permit udp host 192.168.69.103 any eq ntp access-list acl_dmz extended permit udp host 192.168.69.103 any eq domain access-list acl_dmz extended permit tcp host 192.168.69.103 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8080 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8099 access-list acl_dmz extended permit tcp host 192.168.69.105 any eq www access-list acl_dmz extended permit tcp host 192.168.69.103 any eq smtp access-list acl_dmz extended permit tcp host 192.168.69.105 host 192.168.68.103 eq ssh access-list acl_dmz extended permit tcp host 192.168.69.104 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq https pager lines 24 mtu outside 1500 mtu inside 1500 mtu dmz 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 static (dmz,outside) XX.XX.XX.103 192.168.69.11 netmask 255.255.255.255 static (inside,dmz) 192.168.68.17 192.168.68.17 netmask 255.255.255.255 static (inside,dmz) 192.168.68.100 192.168.68.100 netmask 255.255.255.255 static (inside,dmz) 192.168.68.101 192.168.68.101 netmask 255.255.255.255 static (inside,dmz) 192.168.68.102 192.168.68.102 netmask 255.255.255.255 static (inside,dmz) 192.168.68.103 192.168.68.103 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.104 192.168.69.100 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.105 192.168.69.105 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.102 192.168.69.10 netmask 255.255.255.255 access-group acl_out in interface outside access-group acl_dmz in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.97 1 route dmz 10.71.83.0 255.255.255.0 192.168.69.10 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 192.168.68.17 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context Cryptochecksum:2d1bb2dee2d7a3e45db63a489102d7de

  Read the article

• postfix relaying all mail through office365 problems

  - by amrith

  This is a rather long question with a long list of things tried and travails so please bear with me. The summary is this. I am able to relay email from ubuntu through office365 using postfix; the configuration works. It only works as one of the users; more specifically the user who authenticates against office365 is the only valid "from" More details follow. I have a machine in Amazon's cloud on which I run a bunch of jobs and would like to have statuses mailed over to me. I use office365 at work so I want to relay mail through office365. I'm most familiar with postfix so I used that as the MTA. Configuration is ubuntu 12.04LTS; I've installed postfix and mail-utils. For this example, let me say my company is "company.com" and the machine in question (through an elastic IP and a DNS entry) is called "plaything.company.com". hostname is set to "plaything.company.com", so is /etc/mailname On plaything, I have the following users registered alpha, bravo, and charlie. I have the following configuration files. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = plaything.company.com, localhost.company.com, , localhost myhostname = plaything.company.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = [smtp.office365.com]:587 sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes As the machine is called plaything.company.com I went through the exercise of registering all the appropriate DNS entries to make office365 recognize that I owned plaything.company.com and allowed me to create a user called [email protected] in office365. In office365, I setup [email protected] as having another email address of [email protected]. Then, I made the following sender_canonical [email protected] [email protected] I created a sasl_passwd file that reads: smtp.office365.com [email protected]:123456password123456 let's just say that the password for [email protected] is 1234...456 With all this setup, login as alpha and mail [email protected] Cc: Subject: test test and the whole thing works wonderfully. email gets sent off by postfix, TLS works like a champ, authenticates as daemon@... and [email protected] in Office365 gets an email message. The issue comes up when logged in as bravo to the machine. sender is [email protected] and office365 says: status=bounced (host smtp.office365.com[132.245.12.25] said: 550 5.7.1 Client does not have permissions to send as this sender (in reply to end of DATA command)) this is because I'm trying to send mail as bravo@... and authenticating with office365 as daemon@.... The reason it works with alpha@... is because in office365, I setup [email protected] as having another email address of [email protected]. In Postfix Relay to Office365, Miles Erickson answers the question thusly: Don't send mail to Office365 as a user from your Office365-hosted e-mail domain. Use a subdomain instead, e.g. [email protected] instead of [email protected]. It wouldn't hurt to set up an SPF record for services.mydomain.com or whatever you decide to use. Don't authenticate against mail.messaging.microsoft.com as an Office365 user. Just connect on port 25 and deliver the mail to your domain as any foreign SMTP agent would do. OK, I've done #1, I have those records on DNS but for the most part they are not relevant once Office365 recognizes that I own the domain. Here are those records: CNAME records: - msoid.plaything.company.com - autodiscover.plaything.company.com MX record: - plaything.company.com (plaything-company-com.mail.protection.outlook.com) TXT record: - plaything.company.com (v=spf1 include:spf.protection.outlook.com -all) I've tried #2 but no matter what I do, office365 just blows away the connection with "not authenticated". I can try even a simple telnet to port 25 and attempt to send and it doesn't work. 250 BY2PR01CA007.outlook.office365.com Hello [54.221.245.236] 530 5.7.1 Client was not authenticated Connection closed by foreign host. Is there someone out there who has this kind of a configuration working where multiple users on a linux machine are able to relay mail using postfix through office365? There has to be someone out there doing this who can tell me what is wrong with my setup ...

  Read the article

• Cyrus on CentOS with sasl / pam / ldap

  - by Oscar

  SASL/PAM/LDAP is driving me crazy... that's what I read a lot when googling for problems in this area, and what I experience myself :-S I'm trying to get Cyrus imap working for virtual hosting on CentOS with this authorisation backend and really don't know what's happening. In saslauthd I configured the LDAP search filter to use, but it looks like pam completely ignores it. Here's what I do for testing (done more tests but all with similar results): [root@testserv ~]# imtest -u [email protected] -a [email protected] WARNING: no hostname supplied, assuming localhost S: * OK [CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS] testserv. Cyrus IMAP4 v2.3.7-Invoca-RPM-2.3.7-7.el5_6.4 server ready C: C01 CAPABILITY S: * CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS ACL RIGHTS=kxte QUOTA MAILBOX-REFERRALS NAMESPACE UIDPLUS NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND BINARY SORT SORT=MODSEQ THREAD=ORDEREDSUBJECT THREAD=REFERENCES ANNOTATEMORE CATENATE CONDSTORE IDLE LISTEXT LIST-SUBSCRIBED X-NETSCAPE URLAUTH S: C01 OK Completed Please enter your password: C: L01 LOGIN [email protected] {6} S: + go ahead C: <omitted> S: L01 NO Login failed: authentication failure Authentication failed. generic failure Security strength factor: 0 C: Q01 LOGOUT * BYE LOGOUT received Q01 OK Completed Connection closed. The LDAP entry does exist (and so does the mailbox in Cyrus): [root@testserv ~]# ldapsearch -WxD cn=Manager,o=mydomain,c=com [email protected] Enter LDAP Password: # extended LDIF # # LDAPv3 # base <> with scope subtree # filter: [email protected] # requesting: ALL # # myuser, accounts, testserv.mydomain.com, mydomain, com dn: uid=myuser,ou=accounts,dc=testserv.mydomain.com,o=mydomain,c=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uidNumber: 16 uid: myuser gidNumber: 5 givenName: My sn: Name mail: [email protected] cn: My Name userPassword:: dYN5ebB0fXhNRn1pZllhRnJX7Uk= shadowLastChange: 15176 homeDirectory: /dev/null # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 This is what I get in /var/log/messages Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] ... /var/adm/auth.log Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:11 testserv cyrus/imap[12514]: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: ldapdb Aug 2 04:00:19 testserv saslauthd[5926]: DEBUG: auth_pam: pam_authenticate failed: User not known to the underlying authentication module Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] (AFAIK I can ignore the auxprop msg) ... and /var/log/slapd.log: Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 ACCEPT from IP=127.0.0.1:51403 (IP=0.0.0.0:389) Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 BIND dn="" method=128 Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 RESULT tag=97 err=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SRCH base="o=mydomain,c=com" scope=2 deref=0 filter="([email protected])" Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=2 UNBIND Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 closed These are the settings in In /etc/imapd.conf: sasl_mech_list: PLAIN LOGIN sasl_pwcheck_method: saslauthd ## sasl_auxprop_plugin: sasldb sasl_auto_transition: no and my sasl config: [root@testserv ~]# cat /etc/sysconfig/saslauthd # Directory in which to place saslauthd's listening socket, pid file, and so # on. This directory must already exist. SOCKETDIR=/var/run/saslauthd # Mechanism to use when checking passwords. Run "saslauthd -v" to get a list # of which mechanism your installation was compiled with the ablity to use. MECH=pam # Additional flags to pass to saslauthd on the command line. See saslauthd(8) # for the list of accepted flags. FLAGS="-c -r -O /etc/saslauthd.conf" [root@testserv ~]# cat /etc/saslauthd.conf ldap_servers: ldap://127.0.0.1/ ldap_search_base: dc=%d,o=mydomain,c=com ldap_auth_method: bind #ldap_filter: (|(uid=%u)((&(mail=%u@%d)(accountStatus=active))) ldap_filter: (&(mail=%u@%d)(accountStatus=active)) ldap_debug: 1 ldap_version: 3 The accountStatus=active is not in ldap yet, but that doesn't make a difference since I don't see it in the filter... that's not the reason for the failure. The weird thing is, I do get an error when I rename or remove /etc/saslauthd.conf, but when the file exists it seems happily ignored... The filter in slapd.log seems to be taken from /etc/ldap.conf. Apart from some timers, that only contains: host 127.0.0.1 base o=mydomain,c=com pam_login_attribute mail Outcommenting the pam_login_attribute results in this filter in slapd.log: filter="([email protected])" Pam-imap looks like this: [root@testserv ~]# cat /etc/pam.d/imap auth required pam_ldap.so debug account required pam_ldap.so debug #auth sufficient pam_unix.so likeauth nullok #auth sufficient pam_ldap.so use_first_pass #auth required pam_deny.so #account sufficient pam_unix.so #account sufficient pam_ldap.so The outcommented stuff is because I don't have the cyrus admin user in Ldap; that's a Linux user. That works fine when uncommented, but I still need to play around with that a little and first I wanna get imap working. Finally nsswitch: [root@testserv ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: compat ldap group: compat ldap shadow: compat ldap hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: nisplus publickey: nisplus automount: files nisplus aliases: files nisplus Any info where to start looking will be greatly appreciated! Thnx in advance

  Read the article

• How to optimize this JSON/JQuery/Javascript function in IE7/IE8?

  - by melaos

  hi guys, i'm using this function to parse this json data but i find the function to be really slow in IE7 and slightly slow in IE8. basically the first listbox generate the main product list, and upon selection of the main list, it will populate the second list. this is my data: [{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":15913,"ProductName":"Creative Xmod","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":15913,"ProductName":"Creative Xmod","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":18094,"ProductName":"Sound Blaster Wireless Receiver","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":16185,"ProductName":"Xdock Wireless","ProductServiceLifeId":1},{"ProductCategoryId":209,"ProductCategoryName":"X-Fi","ProductSubCategoryId":668,"ProductSubCategoryName":"External Solutions","ProductId":16186,"ProductName":"Xmod Wireless","ProductServiceLifeId":1}] and these are the functions that i'm using: //Three Product Panes function function populateMainPane() { $.getJSON('/Home/ThreePaneProductData/', function(data) { products = data; alert(JSON.stringify(products)); var prodCategory = {}; for (i = 0; i < products.length; i++) { prodCategory[products[i].ProductCategoryId] = products[i].ProductCategoryName; } //end for //take only unique product category to be used var id = 0; for (id in prodCategory) { if (prodCategory.hasOwnProperty(id)) { $(".LBox1").append("<option value='" + id + "'>" + prodCategory[id] + "</option>"); //alert(prodCategory[id]); } } var url = document.location.href; var parms = url.substring(url.indexOf("?") + 1).split("&"); for (var i = 0; i < parms.length; i++) { var parm = parms[i].split("="); if (parm[0].toLowerCase() == "pid") { $(".PanelProductReg").show(); var nProductIds = parm[1].split(","); for (var k = 0; k < nProductIds.length; k++) { var nProductId = parseInt(nProductIds[k], 10); for (var j = 0; j < products.length; j++) { if (nProductId == parseInt(products[j].ProductId, 10)) { addProductRow(nProductId, products[j].ProductName); j = products.length; } } //end for } } } }); } //end function function populateSubCategoryPane() { var subCategory = {}; for (var i = 0; i < products.length; i++) { if (products[i].ProductCategoryId == $('.LBox1').val()) subCategory[products[i].ProductSubCategoryId] = products[i].ProductSubCategoryName; } //end for //clear off the list box first $(".LBox2").html(""); var id = 0; for (id in subCategory) { if (subCategory.hasOwnProperty(id)) { $(".LBox2").append("<option value='" + id + "'>" + subCategory[id] + "</option>"); //alert(prodCategory[id]); } } } //end function is there anything i can do to optimize this or is this a known browser issue?

  Read the article

• Show/hide glossary page in YUI

  - by QLiu

  Hello All, I am trying to develop a toggle function like http://www.lutsr.nl/yui/toggle/ But it works a little different as them. When user enters the glossary page, he sees a full list of Alphabet with all the techical terms explaination All — A | B | C | E | G | H | M | P | Q | R | S | T | U | Z | ActiveSync® Microsoft® ActiveSync est l’ application permettant à un pocket pc d’ échanger des informations avec un ordinateur . Le Pocket PC doit utiliser Microsoft Windows Mobile™ ou Windows CE. Bluetooth® Le Bluetooth permet aux informations d’ être transmises entre les appareils électroniques qui ont le Bluetooth. Si vous utilisez le Bluetooth, vous n'avez pas besoin de connecter les périphériques à l'aide de câbles. ............................. If the user clicks B Alphabet, the rest of content will hide, except B. and B will be move to top of the section. If the user clicks All aplphabet, the whole list will be reset. What I have now, it is able to show/hide and listen to click event. Here is my source code: <a href="#A" class ="toggle" rel="A_section,fade,20"> A</a> | <a href="#B" class ="toggle" rel="B_section,fade,20"> B</a> | Script: //Load JavaScript Ready event. this.toggleLinks=YAHOO.util.Dom.getElementsByClassName("toggle"); for(var i=0; i<this.toggleLinks.length; i++) { YAHOO.util.Event.addListener(this.toggleLinks[i], "click", this.animateElements,this); } toggleElements : function(e,controlNode,refEl) { if(controlNode && refEl) { if(YAHOO.util.Dom.hasClass(refEl,"show")) { YAHOO.util.Dom.removeClass(controlNode,"selected"); YAHOO.util.Dom.removeClass(refEl,"show"); } else { YAHOO.util.Dom.addClass(controlNode,"selected"); YAHOO.util.Dom.addClass(refEl,"show"); } } // to disable control node's default behaviour return false; }, animateElements : function(e,obj) { // obj = javascript toggle object // this = link clicked YAHOO.util.Event.preventDefault(e); if(this.rel) { controlNode = this; } if(typeof(controlNode) == "string") { controlNode = YAHOO.util.Dom.get(controlNode); } // objParameters // [0] = object id // [1] = animation type (fade, slide) // [2] = animation duration (seconds) var linkClicked = this; var objParameters = controlNode.rel.split(","); var refEl = YAHOO.util.Dom.get(objParameters[0]); var objStatus = YAHOO.util.Dom.hasClass(refEl,"show"); // if true, object is shown switchClasses = function() { obj.toggleOtherElements(e,linkClicked,refEl); obj.toggleElements(e,linkClicked,refEl); } if(objParameters[1] == "fade") { if(objStatus == true) { var attributes = { opacity: {from: .999, to: 0} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.onComplete.subscribe(switchClasses); objAnim.animate(); } else { YAHOO.util.Dom.setStyle(objParameters[0],"opacity",0); switchClasses(); var attributes = { opacity: {from: 0, to: .999} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.animate(); } } else if (objParameters[1] == "slide") { // not implemented yet } else { // NO ANIMATION - switch classes switchClasses(); } }, toggleOtherElements : function(e,linkClicked,refEl) { // toggle selected state of other elements pointing to the same source for(var i=0; i<this.toggleLinks.length; i++) { var objParameters = this.toggleLinks[i].rel.split(","); var linkClickedParameters = linkClicked.rel.split(","); if(objParameters[0] == linkClickedParameters[0]) { if(YAHOO.util.Dom.hasClass(this.toggleLinks[i],"selected")) { YAHOO.util.Dom.removeClass(this.toggleLinks[i],"selected"); } else { YAHOO.util.Dom.addClass(this.toggleLinks[i],"selected"); } } } }

  Read the article

• Improving the performance of XSL

  - by Rachel

  In the below XSL for the variable "insert-data", I have an input param with the structure, <insert-data> <data compareIndex="4" nodeName="d1e1"> <a/> </data> <data compareIndex="5" nodeName="d1e1"> <b/> </data> <data compareIndex="7" nodeName="d1e2"> <a/> </data> <data compareIndex="9" nodeName="d1e2"> <b/> </data> </insert-data> where "nodeName" is the id of a node and "compareIndex" is the position of the text content relative to the node having id "$nodeName". I am using the below XSL to select all the text nodes(generate-id) that satisfy the above condition and construct a data xml. The below implementation works perfectly but the time taken for the execution is in min. Is there a better way of implementing or is there any in-efficient operation being used. From my observation the code where the preceding text length is calculated consumes the major time. Please share your thoughts to improve the performance of the XSL. I am using Java SAXON XSL transformer. <xsl:variable name="insert-data" as="element()*"> <xsl:for-each select="$insert-file/insert-data/data"> <xsl:sort select="xsd:integer(@index)"/> <xsl:variable name="compareIndex" select="xsd:integer(@compareIndex)" /> <xsl:variable name="nodeName" select="@nodeName" /> <xsl:variable name="nodeContent" as="node()"> <xsl:copy-of select="node()"/> </xsl:variable> <xsl:for-each select="$main-root/*//text()[ancestor::*[@id = $nodeName]]"> <xsl:variable name="preTextLength" as="xsd:integer" select="sum((preceding::text())[. ancestor::*[@id = $nodeName]]/string-length(.))" /> <xsl:variable name="currentTextLength" as="xsd:integer" select="string-length(.)" /> <xsl:variable name="sum" select="$preTextLength + $currentTextLength" as="xsd:integer"></xsl:variable> <xsl:variable name="split-index" select="$compareIndex - $preTextLength" as="xsd:integer"></xsl:variable> <xsl:if test="($sum ge $compareIndex) and ($compareIndex gt $preTextLength)"> <data split-index="{$split-index}" text-id="{generate-id(.)}"> <xsl:copy-of select="$nodeContent"/> </data> </xsl:if> </xsl:for-each> </xsl:for-each> </xsl:variable>

  Read the article

• Gateway setting is empty

  - by Dodi Jones

  This laptop hasn't been used in almost a year. It connected to the internet just fine last time used. Now it can't get on line. ipconfig:The Gateway setting for this computer is empty. Make sure your access point is working properly. Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Dodi>IPCONFIG /ALL Windows IP Configuration Host Name . . . . . . . . . . . . : 8A287A4ADEF0487 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LAN-Express AS IEEE 802.11g miniPCI Adapter Physical Address. . . . . . . . . : 00-14-A4-72-37-E1 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.1 Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection Physical Address. . . . . . . . . : 00-01-4A-EF-A8-7D How do I fix this?

  Read the article

• skips nines in counter object, AS3

  - by VideoDnd

  It's not that noticeable at first, but my counter skips over to zero and ignores the nines. How can I get my counter to not skip over the nines? my FLA import flash.display.Sprite; import flash.events.Event; import flash.utils.Timer; import flash.events.TimerEvent; var timer:Timer; var count:int = 0; var fcount:int = 0; var numbers:NumbersView; trace("-----new NumberDocument created"); timer = new Timer(10); timer.addEventListener(TimerEvent.TIMER, incrementCounter); timer.start(); numbers = new NumbersView(); addChild(numbers); addEventListener(Event.ENTER_FRAME, enterFrameHandler); //addEventListener(Event.ADDED_TO_STAGE, traceMeOut); function incrementCounter(event:TimerEvent) { count++; fcount=int(count*count/1000); } function formatCount(i:int):String { return ("000000000" + i).substr(-9, 9); } function enterFrameHandler(e:Event):void { numbers.setTime(formatCount(fcount)); } function traceMeOut() { trace("-----Im here on stage!"); } NumbersView.as //NumbersView.as - Your Document Class package { import flash.display.MovieClip; public class NumbersView extends MovieClip { private var _listItems:Array; private const numHeight:int = 120; public function NumbersView() { _listItems = new Array(); var item:NumberImage; for (var i:Number = 0; i < 9; i++) { item = new NumberImage(); addChild(item); item.x = i * item.width; _listItems.push(item); } setTime('123456789'); } public function setTime($number:String):void { var nums:Array = $number.split(""); trace(nums); for (var i:Number = 0; i < nums.length; i++) { _listItems[i].start( int(nums[i]) ); } } } } Variation of NumbersView.as with Tweener //...SNIPPET public function setTime($number:String):void { var nums:Array = $number.split(""); for (var i:Number = 0; i < nums.length; i++) { if (nums[i] == previousNums[i]) continue; Tweener.removeTweens(_listItems[i]); var nuNum:int = int(nums[i]); var nuY:int = nuNum == 0 ? 0 : (nuNum - 1) * -numHeight; trace("nuY = " + nuY); trace("cY = " + _listItems[i].y); Tweener.addTween(_listItems[i], { y:nuY, time:0 } ); } previousNums = nums; } Variation of NumbersView.as that doesn't skip 9, but resets from bottom every count //...SNIPPET public function setTime($number:String):void { var nums:Array = $number.split(""); for (var i:Number = 0; i < nums.length; i++) { if (nums[i] == previousNums[i]) continue; Tweener.removeTweens(_listItems[i]); var newY:int = int(nums[i]) * -numHeight; if (_listItems[i].y < 0) _listItems[i].y = numHeight; Tweener.addTween(_listItems[i], { y:newY, time:3 } ); } previousNums = nums; } PUBLIC CLASS extends MovieClip place 'NumbersView.as' in same directory CLASS Library/'right-click' Properties/Class:NumberImage SYMBOL number column 70x1080 numbers 70x120 TWEENER caurina folder in local directory

  Read the article

• Update MySQL table using data from a text file through Java

  - by Karthi Karthi

  I have a text file with four lines, each line contains comma separated values like below file My file is: Raj,[email protected],123455 kumar,[email protected],23453 shilpa,[email protected],765468 suraj,[email protected],876567 and I have a MySQL table which contains four fields firstname lastname email phno ---------- ---------- --------- -------- Raj babu [email protected] 2343245 kumar selva [email protected] 23453 shilpa murali [email protected] 765468 suraj abd [email protected] 876567 Now I want to update my table using the data in the above text file through Java. I have tried using bufferedReader to read from the file and used split method using comma as delimiter and stored it in array. But it is not working. Any help appreciated. This is what I have tried so far void readingFile() { try { File f1 = new File("TestFile.txt"); FileReader fr = new FileReader(f1); BufferedReader br = new BufferedReader(fr); String strln = null; strln = br.readLine(); while((strln=br.readLine())!=null) { // System.out.println(strln); arr = strln.split(","); strfirstname = arr[0]; strlastname = arr[1]; stremail = arr[2]; strphno = arr[3]; System.out.println(strfirstname + " " + strlastname + " " + stremail +" "+ strphno); } // for(String i : arr) // { // } br.close(); fr.close(); } catch(IOException e) { System.out.println("Cannot read from File." + e); } try { st = conn.createStatement(); String query = "update sampledb set email = stremail,phno =strphno where firstname = strfirstname "; st.executeUpdate(query); st.close(); System.out.println("sampledb Table successfully updated."); } catch(Exception e3) { System.out.println("Unable to Update sampledb table. " + e3); } } and the output i got is: Ganesh Pandiyan [email protected] 9591982389 Dass Jeyan [email protected] 9689523645 Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 1 Gowtham Selvan [email protected] 9894189423 at TemporaryPackages.FileReadAndUpdateTable.readingFile(FileReadAndUpdateTable.java:35) at TemporaryPackages.FileReadAndUpdateTable.main(FileReadAndUpdateTable.java:72) Java Result: 1 @varadaraj: This is the code of yours.... String stremail,strphno,strfirstname,strlastname; // String[] arr; Connection conn; Statement st; void readingFile() { try { BufferedReader bReader= new BufferedReader(new FileReader("TestFile.txt")); String fileValues; while ((fileValues = bReader.readLine()) != null) { String[] values=fileValues .split(","); strfirstname = values[0]; // strlastname = values[1]; stremail = values[1]; strphno = values[2]; System.out.println(strfirstname + " " + strlastname + " " + stremail +" "+ strphno); } bReader.close(); } catch (IOException e) { System.out.println("File Read Error"); } // for(String i : arr) // { // } try { st = conn.createStatement(); String query = "update sampledb set email = stremail,phno =strphno where firstname = strfirstname "; st.executeUpdate(query); st.close(); System.out.println("sampledb Table successfully updated."); } catch(Exception e3) { System.out.println("Unable to Update sampledb table. " + e3); } }

  Read the article

• Windows XP periodically disconnects, reconnects; Windows 7 doesn't

  - by einpoklum

  My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it doesn't happen. The connection is smooth (OS is sluggish though, but never mind that). Like I said, I updated the NIC driver. I tried reducing the MTU (used something called Dr. TCP), thinking maybe that would help, but it didn't. (I'm a bit but not super-knowledgeable about TCP parameters.) I'm guessing it's either a problem with the driver or some settings which are different between the two OSes. ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM

  Read the article

• android get duration from maps.google.com directions

  - by urobo

  At the moment I am using this code to inquire google maps for directions from an address to another one, then I simply draw it on a mapview from its GeometryCollection. But yet this isn't enough I need also to extract the total expected duration from the kml. can someone give a little sample code to help me? thanks StringBuilder urlString = new StringBuilder(); urlString.append("http://maps.google.com/maps?f=d&hl=en"); urlString.append("&saddr=");//from urlString.append( Double.toString((double)src.getLatitudeE6()/1.0E6 )); urlString.append(","); urlString.append( Double.toString((double)src.getLongitudeE6()/1.0E6 )); urlString.append("&daddr=");//to urlString.append( Double.toString((double)dest.getLatitudeE6()/1.0E6 )); urlString.append(","); urlString.append( Double.toString((double)dest.getLongitudeE6()/1.0E6 )); urlString.append("&ie=UTF8&0&om=0&output=kml"); //Log.d("xxx","URL="+urlString.toString()); // get the kml (XML) doc. And parse it to get the coordinates(direction route). Document doc = null; HttpURLConnection urlConnection= null; URL url = null; try { url = new URL(urlString.toString()); urlConnection=(HttpURLConnection)url.openConnection(); urlConnection.setRequestMethod("GET"); urlConnection.setDoOutput(true); urlConnection.setDoInput(true); urlConnection.connect(); dbf = DocumentBuilderFactory.newInstance(); db = dbf.newDocumentBuilder(); doc = db.parse(urlConnection.getInputStream()); if(doc.getElementsByTagName("GeometryCollection").getLength()>0) { //String path = doc.getElementsByTagName("GeometryCollection").item(0).getFirstChild().getFirstChild().getNodeName(); String path = doc.getElementsByTagName("GeometryCollection").item(0).getFirstChild().getFirstChild().getFirstChild().getNodeValue() ; //Log.d("xxx","path="+ path); String[] pairs = path.split(" "); String[] lngLat = pairs[0].split(","); // lngLat[0]=longitude lngLat[1]=latitude lngLat[2]=height // src GeoPoint startGP = new GeoPoint((int)(Double.parseDouble(lngLat[1])*1E6),(int)(Double.parseDouble(lngLat[0])*1E6)); mMapView01.getOverlays().add(new MyOverLay(startGP,startGP,1)); GeoPoint gp1; GeoPoint gp2 = startGP; for(int i=1;i<pairs.length;i++) // the last one would be crash { lngLat = pairs[i].split(","); gp1 = gp2; // watch out! For GeoPoint, first:latitude, second:longitude gp2 = new GeoPoint((int)(Double.parseDouble(lngLat[1])*1E6),(int)(Double.parseDouble(lngLat[0])*1E6)); mMapView01.getOverlays().add(new MyOverLay(gp1,gp2,2,color)); //Log.d("xxx","pair:" + pairs[i]); } mMapView01.getOverlays().add(new MyOverLay(dest,dest, 3)); // use the default color } }catch (MalformedURLException e){ e.printStackTrace(); }catch (IOException e){ e.printStackTrace(); }catch (SAXException e){ e.printStackTrace(); } catch (ParserConfigurationException e) { e.printStackTrace(); } }

  Read the article

• How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• Mac won't boot into safe mode

  - by Stephen

  Mac boots fine normally, except when in safe mode. Holding down shift when booting gets me to the progress bar on the grey screen. Progress bar gets about half way before mac reboots. I modified nvram boot-args to get a better look: sudo nvram boot-args="-x -v" It definitely gets through fsck, skips loading kernel extensions (since it's in safe mode), does something with the network interfaces, then this is the last thing it wips through... Aug 22 11:56:21 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client '/usr/libexec/UserEventAgent' [10] for authorization created by '/usr/libexec/UserEventAgent' [10] (100012,0) Aug 22 11:56:22 Crockpot fseventsd[37]: event logs in /.fseventsd out of sync with volume. destroying old logs. (1 174 330) Aug 22 11:56:22 Crockpot fseventsd[37]: log dir: /.fseventsd getting new uuid: 5C379650-26FA-428F-B81F-4FE4349D50B3 Aug 22 11:56:23 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12 Aug 22 11:56:23 Crockpot systemkeychain[35]: done file: /var/run/systemkeychaincheck.done Aug 22 11:56:23 Crockpot configd[17]: network changed: DNS* Aug 22 11:56:24 --- last message repeated 1 time --- Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2D_IPC: Loaded Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2DInitialize succeeded Aug 22 11:56:24 Crockpot mDNSResponder[39]: Adding registration domain 273025955.members.btmm.icloud.com. Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe MAC AUTH succeeded Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe Unsolicited Auth Aug 22 11:56:24 Crockpot kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0 Aug 22 11:56:24 Crockpot kernel[0]: AirPort: Link Up on en1 Aug 22 11:56:24 Crockpot kernel[0]: en1: BSSID changed to 00:23:69:35:dc:fe Aug 22 11:56:24 Crockpot kernel[0]: en1::IO80211Interface::postMessage bssid changed Aug 22 11:56:24 Crockpot kernel[0]: AirPort: RSN handshake complete on en1 Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences failed to read preferences data. Errno was 21 Aug 22 11:56:25 --- last message repeated 1 time --- Aug 22 11:56:25 Crockpot airportd[30]: _doAutoJoin: Already associated to “burnum”. Bailing on auto-join. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel. Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences: error renaming file blued.plist.HXuEmQn to blued.plist. Aug 22 11:56:27 Crockpot awacsd[52]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49) Aug 22 11:56:27 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'system.services.systemconfiguration.network' by client '/System/Library/Frameworks/SystemConfiguration.framework/Versions/A/Resources/SCHelper' [54] for authorization created by '/usr/sbin/awacsd' [52] (100003,0) Aug 22 11:56:27 --- last message repeated 1 time --- Aug 22 11:56:27 Crockpot awacsd[52]: Configuring lazy AWACS client: 273025955.p04.members.btmm.icloud.com. Aug 22 11:56:28 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:32 --- last message repeated 1 time --- Aug 22 11:56:32 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:38 --- last message repeated 1 time --- Aug 22 11:56:38 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:47 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:49 Crockpot configd[17]: subnet_route: write routing socket failed, Network is unreachable Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1+:169.254.80.161) DNS* Proxy+ SMB Aug 22 11:56:51 Crockpot UserEventAgent[10]: Captive: en1: Not probing 'burnum' (protected network) Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1:169.254.80.161) DNS Proxy SMB Aug 22 11:57:07 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:57:23 Crockpot fseventsd[37]: Logging disabled completely for device:1: /Volumes/Recovery HD Aug 22 11:57:25 Crockpot kernel[0]: Kext loading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kext unloading now disabled. Aug 22 11:57:25 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) stopping Aug 22 11:57:25 Crockpot com.apple.SecurityServer[15]: Killing auth hosts Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot configd[17]: dnssd_clientstub read_all(26) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: [0x7fb025119ff0] SCNetworkReachability _llq_callback w/error=-65563 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2D_IPC: Terminated Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2DTerminate succeeded Aug 22 11:57:25 Crockpot awacsd[52]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 2 times --- Aug 22 11:57:25 Crockpot apsd[55]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: SCNC: stop, triggered by configd, type PPPSerial, reason Terminated All Aug 22 11:57:25 Crockpot configd[17]: _d2dCallback: D2D connection to mDNSResponder lost Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 4 times --- Aug 22 11:57:25 Crockpot kernel[0]: Kext autounloading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kernel requests now disabled. ... before rebooting in the middle of the safe mode startup sequence. Aug 22 12:01:10 localhost bootlog[0]: BOOT_TIME 1345662070 0 Aug 22 12:01:32 localhost kernel[0]: PMAP: PCID enabled Aug 22 12:01:32 localhost kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 Any ideas what's causing the safe mode boot to fail? System Info MacBook Pro 8,2 2.2 Ghz Core i7 4 GM Ram Mountain Lion 10.8 500GB TOSHIBA MK5065GSXF Serial-ATA rotational disk

  Read the article

• Ladder-like word game in Java

  - by sasquatch90

  I've found this question http://stackoverflow.com/questions/2844190/choosing-design-method-for-ladder-like-word-game and I would also like to do this kind of program. I've written some code but already have two issues. Here's what I already have : GRID : public class Grid { public Grid(){} public Grid( Element e ){} } ELEMENT : public class Element { final int INVISIBLE = 0; final int EMPTY = 1; final int FIRST_LETTER = 2; final int OTHER_LETTER = 3; private int state; private String letter; public Element(){} //empty block public Element(int state){ this("", 0); } //filled block public Element(String s, int state){ this.state = state; this.letter = s; } public static void changeState(int s){ } public int getState(){ return state; } public boolean equalLength(){ return true; } public boolean equalValue(){ return true; } @Override public String toString(){ return "["+letter+"]"; } } MAIN: import java.util.Scanner; public class Main { public static void main(String[] args){ Scanner sc = new Scanner(System.in); System.out.println("Height: "); while (!sc.hasNextInt()) { System.out.println("int, please!"); sc.next(); } final int height = sc.nextInt(); Grid[] game = new Grid[height]; for(int i = 1; i <= height; i++) { String s; do { System.out.println("Length " + i + ", please!"); s = sc.next(); } while (s.length() != i); Element[] line = new Element[s.length()+1]; Element single = null; String[] temp = null; //issue here temp = s.split(""); System.out.println("s.length: "+s.length()); System.out.println("temp.length: "+temp.length); // for(String str : temp){ System.out.println("str:"+str); } for (int k = 0 ; k < temp.length ; k++) { if( k == 0 ){ single = new Element(temp[k], 2); System.out.println("single1: "+single); } else{ single = new Element(temp[k], 3); System.out.println("single2: "+single); } line[k] = single; } for (Element l : line) { System.out.println("line:"+l); } //issue here game[i] = line; } // for (Grid g : game) { System.out.println(g); } } } And sample output for debug : Height: 3 Length 1, please! A s.length: 1 temp.length: 2 str: str:A single1: [] single2: [A] line:[] line:[A] Here's what I think it should work like. I grab a word from user. Next create Grid element for whole game. Then for each line I create Element[] array called line. I split the given text and here's the first problem. Why string.split() adds a whitespace ? You can see clearly in output that it is added for no reason. How can I get rid of it (now I had to add +1 to the length of line just to run the code). Continuing I'm throwing the splitted text into temporary String array and next from each letter I create Element object and throw it to line array. Apart of this empty space output looks fine. But next problem is with Grid. I've created constructor taking Element as an argument, but still I can't throw line as Grid[] elements because of 'incompatible types'. How can I fix that ? Am I even doing it right ? Maybe I should get rid of line as Element[] and just create Grid[][] ?

  Read the article

• HttpClient multithread performance

  - by pepper

  I have an application which downloads more than 4500 html pages from 62 target hosts using HttpClient (4.1.3 or 4.2-beta). It runs on Windows 7 64-bit. Processor - Core i7 2600K. Network bandwidth - 54 Mb/s. At this moment it uses such parameters: DefaultHttpClient and PoolingClientConnectionManager; Also it hasIdleConnectionMonitorThread from http://hc.apache.org/httpcomponents-client-ga/tutorial/html/connmgmt.html; Maximum total connections = 80; Default maximum connections per route = 5; For thread management it uses ForkJoinPool with the parallelism level = 5 (Do I understand correctly that it is a number of working threads?) In this case my network usage (in Windows task manager) does not rise above 2.5%. To download 4500 pages it takes 70 minutes. And in HttpClient logs I have such things: DEBUG ForkJoinPool-2-worker-1 [org.apache.http.impl.conn.PoolingClientConnectionManager]: Connection released: [id: 209][route: {}-http://stackoverflow.com][total kept alive: 6; route allocated: 1 of 5; total allocated: 10 of 80] Total allocated connections do not raise above 10-12, in spite of that I've set it up to 80 connections. If I'll try to rise parallelism level to 20 or 80, network usage remains the same but a lot connection time-outs will be generated. I've read tutorials on hc.apache.org (HttpClient Performance Optimization Guide and HttpClient Threading Guide) but they does not help. Task's code looks like this: public class ContentDownloader extends RecursiveAction { private final HttpClient httpClient; private final HttpContext context; private List<Entry> entries; public ContentDownloader(HttpClient httpClient, List<Entry> entries){ this.httpClient = httpClient; context = new BasicHttpContext(); this.entries = entries; } private void computeDirectly(Entry entry){ final HttpGet get = new HttpGet(entry.getLink()); try { HttpResponse response = httpClient.execute(get, context); int statusCode = response.getStatusLine().getStatusCode(); if ( (statusCode >= 400) && (statusCode <= 600) ) { logger.error("Couldn't get content from " + get.getURI().toString() + "\n" + response.toString()); } else { HttpEntity entity = response.getEntity(); if (entity != null) { String htmlContent = EntityUtils.toString(entity).trim(); entry.setHtml(htmlContent); EntityUtils.consumeQuietly(entity); } } } catch (Exception e) { } finally { get.releaseConnection(); } } @Override protected void compute() { if (entries.size() <= 1){ computeDirectly(entries.get(0)); return; } int split = entries.size() / 2; invokeAll(new ContentDownloader(httpClient, entries.subList(0, split)), new ContentDownloader(httpClient, entries.subList(split, entries.size()))); } } And the question is - what is the best practice to use multi threaded HttpClient, may be there is a some rules for setting up ConnectionManager and HttpClient? How can I use all of 80 connections and raise network usage? If necessary, I will provide more code.

  Read the article

• DDNS Not Creating Journal (Dhcpd and Named)

  - by user130094

  * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

  Read the article

• Perl MiniWebserver

  - by snikolov

  hey guys i have config this miniwebserver, however i require the server to download a file in the local directory i am getting a problem can you please fix my issue thanks !/usr/bin/perl use strict; use Socket; use IO::Socket; my $buffer; my $file; my $length; my $output; Simple web server in Perl Serves out .html files, echos form data sub parse_form { my $data = $_[0]; my %data; foreach (split /&/, $data) { my ($key, $val) = split /=/; $val =~ s/+/ /g; $val =~ s/%(..)/chr(hex($1))/eg; $data{$key} = $val;} return %data; } Setup and create socket my $port = shift; defined($port) or die "Usage: $0 portno\n"; my $DOCUMENT_ROOT = $ENV{'HOME'} . "public"; my $server = new IO::Socket::INET(Proto = 'tcp', LocalPort = $port, Listen = SOMAXCONN, Reuse = 1); $server or die "Unable to create server socket: $!" ; Await requests and handle them as they arrive while (my $client = $server-accept()) { $client-autoflush(1); my %request = (); my %data; { -------- Read Request --------------- local $/ = Socket::CRLF; while (<$client>) { chomp; # Main http request if (/\s*(\w+)\s*([^\s]+)\s*HTTP\/(\d.\d)/) { $request{METHOD} = uc $1; $request{URL} = $2; $request{HTTP_VERSION} = $3; } # Standard headers elsif (/:/) { (my $type, my $val) = split /:/, $_, 2; $type =~ s/^\s+//; foreach ($type, $val) { s/^\s+//; s/\s+$//; } $request{lc $type} = $val; } # POST data elsif (/^$/) { read($client, $request{CONTENT}, $request{'content-length'}) if defined $request{'content-length'}; last; } } } -------- SORT OUT METHOD --------------- if ($request{METHOD} eq 'GET') { if ($request{URL} =~ /(.*)\?(.*)/) { $request{URL} = $1; $request{CONTENT} = $2; %data = parse_form($request{CONTENT}); } else { %data = (); } $data{"_method"} = "GET"; } elsif ($request{METHOD} eq 'POST') { %data = parse_form($request{CONTENT}); $data{"_method"} = "POST"; } else { $data{"_method"} = "ERROR"; } ------- Serve file ---------------------- my $localfile = $DOCUMENT_ROOT.$request{URL}; Send Response if (open(FILE, "<$localfile")) { print $client "HTTP/1.0 200 OK", Socket::CRLF; print $client "Content-type: text/html", Socket::CRLF; print $client Socket::CRLF; my $buffer; while (read(FILE, $buffer, 4096)) { print $client $buffer; } $data{"_status"} = "200"; } else { $file = 'a.pl'; open(INFILE, $file); while (<INFILE>) { $output .= $_; ##output of the file } $length = length($output); print $client "'HTTP/1.0 200 OK", Socket::CRLF; print $client "Content-type: application/octet-stream", Socket::CRLF; print $client "Content-Length:".$length, Socket::CRLF; print $client "Accept-Ranges: bytes", Socket::CRLF; print $client 'Content-Disposition: attachment; filename="test.zip"', Socket::CRLF; print $client $output, Socket::CRLF; print $client 'Content-Transfer-Encoding: binary"', Socket::CRLF; print $client "Connection: Keep-Alive", Socket::CRLF; # #$data{"_status"} = "404"; # } close(FILE); Log Request print ($DOCUMENT_ROOT.$request{URL},"\n"); foreach (keys(%data)) { print (" $_ = $data{$_}\n"); } ----------- Close Connection and loop ------------------ close $client; } END

  Read the article

• How to generate a random unique string with more than 2^30 combination. I also wanted to reverse the process. Is this possible?

  - by Yusuf S

  I have a string which contains 3 elements: a 3 digit code (example: SIN, ABD, SMS, etc) a 1 digit code type (example: 1, 2, 3, etc) a 3 digit number (example: 500, 123, 345) Example string: SIN1500, ABD2123, SMS3345, etc.. I wanted to generate a UNIQUE 10 digit alphanumeric and case sensitive string (only 0-9/a-z/A-Z is allowed), with more than 2^30 (about 1 billion) unique combination per string supplied. The generated code must have a particular algorithm so that I can reverse the process. For example: public static void main(String[] args) { String test = "ABD2123"; String result = generateData(test); System.out.println(generateOutput(test)); //for example, the output of this is: 1jS8g4GDn0 System.out.println(generateOutput(result)); //the output of this will be ABD2123 (the original string supplied) } What I wanted to ask is is there any ideas/examples/libraries in java that can do this? Or at least any hint on what keyword should I put on Google? I tried googling using the keyword java checksum, rng, security, random number, etc and also tried looking at some random number solution (java SecureRandom, xorshift RNG, java.util.zip's checksum, etc) but I can't seem to find one? Thanks! EDIT: My use case for this program is to generate some kind of unique voucher number to be used by specific customers. The string supplied will contains 3 digit code for company ID, 1 digit code for voucher type, and a 3 digit number for the voucher nominal. I also tried adding 3 random alphanumeric (so the final digit is 7 + 3 digit = 10 digit). This is what I've done so far, but the result is not very good (only about 100 thousand combination): public static String in ="somerandomstrings"; public static String out="someotherrandomstrings"; public static String encrypt(String kata) throws Exception { String result=""; String ina=in; String outa=out; Random ran = new Random(); Integer modulus=in.length(); Integer offset= ((Integer.parseInt(Utils.convertDateToString(new Date(), "SS")))+ran.nextInt(60))/2%modulus; result=ina.substring(offset, offset+1); ina=ina+ina; ina=ina.substring(offset, offset+modulus); result=result+translate(kata, ina, outa); return result; } EDIT: I'm sorry I forgot to put the "translate" function : public static String translate(String kata,String seq1, String seq2){ String result=""; if(kata!=null&seq1!=null&seq2!=null){ String[] a=kata.split(""); for (int j = 1; j < a.length; j++) { String b=a[j]; String[]seq1split=seq1.split(""); String[]seq2split=seq2.split(""); int hint=seq1.indexOf(b)+1; String sq=""; if(seq1split.length>hint) sq=seq1split[hint]; String sq1=""; if(seq2split.length>hint) sq1=seq2split[hint]; b=b.replace(sq, sq1); result=result+b; } } return result; }

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• replaceAll() method using parameter from text file

  - by Herman Plani Ginting

  i have a collection of raw text in a table in database, i need to replace some words in this collection using a set of words. i put all the term to be replace and its substitutes in a text file as below min=admin lelet=lambat lemot=lambat nii=nih ntu=itu and so on. i have successfully initiate a variabel of File and Scanner to read the collection of the term and its substitutes. i loop all the dataset and save the raw text in a string in the same loop i loop all the term collection and save its row to a string name 'pattern', and split the pattern into two string named 'term' and 'replacer' in this loop i initiate a new string which its value is the string from the dataset modified by replaceAll(term,replacer) end loop for term collection then i insert the new string to another table in database end loop for dataset i do it manualy as below replaceAll("min","admin") and its works but its really something to code it manually for almost 2000 terms to be replace it. anyone ever face this kind of really something.. i really need a help now desperate :( package sentimenrepo; import javax.swing.*; import java.sql.*; import java.io.*; //import java.util.HashMap; import java.util.Scanner; //import java.util.Map; /** * * @author herman */ public class synonimReplaceV2 extends SwingWorker { protected Object doInBackground() throws Exception { new skripsisentimen.sentimenttwitter().setVisible(true); Integer row = 0; File synonimV2 = new File("synV2/catatan_kata_sinonim.txt"); String newTweet = ""; DB db = new DB(); Connection conn = db.dbConnect("jdbc:mysql://localhost:3306/tweet", "root", ""); try{ Statement select = conn.createStatement(); select.executeQuery("select * from synonimtweet"); ResultSet RS = select.getResultSet(); Scanner scSynV2 = new Scanner(synonimV2); while(RS.next()){ row++; String no = RS.getString("no"); String tweet = " "+ RS.getString("tweet"); String published = RS.getString("published"); String label = RS.getString("label"); clean2 cleanv2 = new clean2(); newTweet = cleanv2.cleanTweet(tweet); try{ Statement insert = conn.createStatement(); insert.executeUpdate("INSERT INTO synonimtweet_v2(no,tweet,published,label) values('" +no+"','"+newTweet+"','"+published+"','"+label+"')"); String current = skripsisentimen.sentimenttwitter.txtAreaResult.getText(); skripsisentimen.sentimenttwitter.txtAreaResult.setText(current+"\n"+row+"original : "+tweet+"\n"+newTweet+"\n______________________\n"); skripsisentimen.sentimenttwitter.lblStat.setText(row+" tweet read"); skripsisentimen.sentimenttwitter.txtAreaResult.setCaretPosition(skripsisentimen.sentimenttwitter.txtAreaResult.getText().length() - 1); }catch(Exception e){ skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } }catch(Exception e){ skripsisentimen.sentimenttwitter.lblStat.setText(e.getMessage()); } return row; } class clean2{ public clean2(){} public String cleanTweet(String tweet){ File synonimV2 = new File("synV2/catatan_kata_sinonim.txt"); String pattern = ""; String term = ""; String replacer = ""; String newTweet=""; try{ Scanner scSynV2 = new Scanner(synonimV2); while(scSynV2.hasNext()){ pattern = scSynV2.next(); term = pattern.split("=")[0]; replacer = pattern.split("=")[1]; newTweet = tweet.replace(term, replacer); } }catch(Exception e){ e.printStackTrace(); } System.out.println(newTweet+"\n"+tweet); return newTweet; } } }

  Read the article

• Day 2 - Game Design Documentation

  - by dapostolov

  So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

  Read the article

• Clustering Basics and Challenges

  - by Karoly Vegh

  For upcoming posts it seemed to be a good idea to dedicate some time for cluster basic concepts and theory. This post misses a lot of details that would explode the articlesize, should you have questions, do not hesitate to ask them in the comments.  The goal here is to get some concepts straight. I can't promise to give you an overall complete definitions of cluster, cluster agent, quorum, voting, fencing, split brain condition, so the following is more of an explanation. Here we go. -------- Cluster, HA, failover, switchover, scalability -------- An attempted definition of a Cluster: A cluster is a set (2+) server nodes dedicated to keep application services alive, communicating through the cluster software/framework with eachother, test and probe health status of servernodes/services and with quorum based decisions and with switchover/failover techniques keep the application services running on them available. That is, should a node that runs a service unexpectedly lose functionality/connection, the other ones would take over the and run the services, so that availability is guaranteed. To provide availability while strictly sticking to a consistent clusterconfiguration is the main goal of a cluster.  At this point we have to add that this defines a HA-cluster, a High-Availability cluster, where the clusternodes are planned to run the services in an active-standby, or failover fashion. An example could be a single instance database. Some applications can be run in a distributed or scalable fashion. In the latter case instances of the application run actively on separate clusternodes serving servicerequests simultaneously. An example for this version could be a webserver that forwards connection requests to many backend servers in a round-robin way. Or a database running in active-active RAC setup.  -------- Cluster arhitecture, interconnect, topologies -------- Now, what is a cluster made of? Servers, right. These servers (the clusternodes) need to communicate. This of course happens over the network, usually over dedicated network interfaces interconnecting all the clusternodes. These connection are called interconnects.How many clusternodes are in a cluster? There are different cluster topologies. The most simple one is a clustered pair topology, involving only two clusternodes:  There are several more topologies, clicking the image above will take you to the relevant documentation. Also, to answer the question Solaris Cluster allows you to run up to 16 servers in a cluster. Where shall these clusternodes be placed? A very important question. The right answer is: It depends on what you plan to achieve with the cluster. Do you plan to avoid only a server outage? Then you can place them right next to eachother in the datacenter. Do you need to avoid DataCenter outage? In that case of course you should place them at least in different fire zones. Or in two geographically distant DataCenters to avoid disasters like floods, large-scale fires or power outages. We call this a stretched- or campus cluster, the clusternodes being several kilometers away from eachother. To cover really large distances, you probably need to move to a GeoCluster, which is a different kind of animal.  What is a geocluster? A Geographic Cluster in Solaris Cluster terms is actually a metacluster between two, separate (locally-HA) clusters.  -------- Cluster resource types, agents, resources, resource groups -------- So how does the cluster manage my applications? The cluster needs to start, stop and probe your applications. If you application runs, the cluster needs to check regularly if the application state is healthy, does it respond over the network, does it have all the processes running, etc. This is called probing. If the cluster deems the application is in a faulty state, then it can try to restart it locally or decide to switch (stop on node A, start on node B) the service. Starting, stopping and probing are the three actions that a cluster agent does. There are many different kinds of agents included in Solaris Cluster, but you can build your own too. Examples are an agent that manages (mounts, moves) ZFS filesystems, or the Oracle DB HA agent that cares about the database, or an agent that moves a floating IP address between nodes. There are lots of other agents included for Apache, Tomcat, MySQL, Oracle DB, Oracle Weblogic, Zones, LDoms, NFS, DNS, etc.We also need to clarify the difference between a cluster resource and the cluster resource group.A cluster resource is something that is managed by a cluster agent. Cluster resource types are included in Solaris cluster (see above, e.g. HAStoragePlus, HA-Oracle, LogicalHost). You can group cluster resources into cluster resourcegroups, and switch these groups together from one node to another. To stick to the example above, to move an Oracle DB service from one node to another, you have to switch the group between nodes, and the agents of the cluster resources in the group will do the following:  On node A Shut down the DB Unconfigure the LogicalHost IP the DB Listener listens on unmount the filesystem   Then, on node B: mount the FS configure the IP  startup the DB -------- Voting, Quorum, Split Brain Condition, Fencing, Amnesia -------- How do the clusternodes agree upon their action? How do they decide which node runs what services? Another important question. Running a cluster is a strictly democratic thing.Every node has votes, and you need the majority of votes to have the deciding power. Now, this is usually no problem, clusternodes think very much all alike. Still, every action needs to be governed upon in a productive system, and has to be agreed upon. Agreeing is easy as long as the clusternodes all behave and talk to eachother over the interconnect. But if the interconnect is gone/down, this all gets tricky and confusing. Clusternodes think like this: "My job is to run these services. The other node does not answer my interconnect communication, it must be down. I'd better take control and run the services!". The problem is, as I have already mentioned, clusternodes very much think alike. If the interconnect is gone, they all assume the other node is down, and they all want to mount the data backend, enable the IP and run the database. Double IPs, double mounts, double DB instances - now that is trouble. Also, in a 2-node cluster they both have only 50% of the votes, that is, they themselves alone are not allowed to run a cluster.  This is where you need a quorum device. According to Wikipedia, the "requirement for a quorum is protection against totally unrepresentative action in the name of the body by an unduly small number of persons.". They need additional votes to run the cluster. For this requirement a 2-node cluster needs a quorum device or a quorum server. If the interconnect is gone, (this is what we call a split brain condition) both nodes start to race and try to reserve the quorum device to themselves. They do this, because the quorum device bears an additional vote, that could ensure majority (50% +1). The one that manages to lock the quorum device (e.g. if it's an FC LUN, it SCSI reserves it) wins the right to build/run a cluster, the other one - realizing he was late - panics/reboots to ensure the cluster config stays consistent.  Losing the interconnect isn't only endangering the availability of services, but it also endangers the cluster configuration consistence. Just imagine node A being down and during that the cluster configuration changes. Now node B goes down, and node A comes up. It isn't uptodate about the cluster configuration's changes so it will refuse to start a cluster, since that would lead to cluster amnesia, that is the cluster had some changes, but now runs with an older cluster configuration repository state, that is it's like it forgot about the changes.  Also, to ensure application data consistence, the clusternode that wins the race makes sure that a server that isn't part of or can't currently join the cluster can access the devices. This procedure is called fencing. This usually happens to storage LUNs via SCSI reservation.  Now, another important question: Where do I place the quorum disk?  Imagine having two sites, two separate datacenters, one in the north of the city and the other one in the south part of it. You run a stretched cluster in the clustered pair topology. Where do you place the quorum disk/server? If you put it into the north DC, and that gets hit by a meteor, you lose one clusternode, which isn't a problem, but you also lose your quorum, and the south clusternode can't keep the cluster running lacking the votes. This problem can't be solved with two sites and a campus cluster. You will need a third site to either place the quorum server to, or a third clusternode. Otherwise, lacking majority, if you lose the site that had your quorum, you lose the cluster. Okay, we covered the very basics. We haven't talked about virtualization support, CCR, ClusterFilesystems, DID devices, affinities, storage-replication, management tools, upgrade procedures - should those be interesting for you, let me know in the comments, along with any other questions. Given enough demand I'd be glad to write a followup post too. Now I really want to move on to the second part in the series: ClusterInstallation.  Oh, as for additional source of information, I recommend the documentation: http://docs.oracle.com/cd/E23623_01/index.html, and the OTN Oracle Solaris Cluster site: http://www.oracle.com/technetwork/server-storage/solaris-cluster/index.html

  Read the article

• Solving Big Problems with Oracle R Enterprise, Part II

  - by dbayard

  Part II – Solving Big Problems with Oracle R Enterprise In the first post in this series (see https://blogs.oracle.com/R/entry/solving_big_problems_with_oracle), we showed how you can use R to perform historical rate of return calculations against investment data sourced from a spreadsheet.  We demonstrated the calculations against sample data for a small set of accounts.  While this worked fine, in the real-world the problem is much bigger because the amount of data is much bigger.  So much bigger that our approach in the previous post won’t scale to meet the real-world needs. From our previous post, here are the challenges we need to conquer: The actual data that needs to be used lives in a database, not in a spreadsheet The actual data is much, much bigger- too big to fit into the normal R memory space and too big to want to move across the network The overall process needs to run fast- much faster than a single processor The actual data needs to be kept secured- another reason to not want to move it from the database and across the network And the process of calculating the IRR needs to be integrated together with other database ETL activities, so that IRR’s can be calculated as part of the data warehouse refresh processes In this post, we will show how we moved from sample data environment to working with full-scale data.  This post is based on actual work we did for a financial services customer during a recent proof-of-concept. Getting started with the Database At this point, we have some sample data and our IRR function.  We were at a similar point in our customer proof-of-concept exercise- we had sample data but we did not have the full customer data yet.  So our database was empty.  But, this was easily rectified by leveraging the transparency features of Oracle R Enterprise (see https://blogs.oracle.com/R/entry/analyzing_big_data_using_the).  The following code shows how we took our sample data SimpleMWRRData and easily turned it into a new Oracle database table called IRR_DATA via ore.create().  The code also shows how we can access the database table IRR_DATA as if it was a normal R data.frame named IRR_DATA. If we go to sql*plus, we can also check out our new IRR_DATA table: At this point, we now have our sample data loaded in the database as a normal Oracle table called IRR_DATA.  So, we now proceeded to test our R function working with database data. As our first test, we retrieved the data from a single account from the IRR_DATA table, pull it into local R memory, then call our IRR function.  This worked.  No SQL coding required! Going from Crawling to Walking Now that we have shown using our R code with database-resident data for a single account, we wanted to experiment with doing this for multiple accounts.  In other words, we wanted to implement the split-apply-combine technique we discussed in our first post in this series.  Fortunately, Oracle R Enterprise provides a very scalable way to do this with a function called ore.groupApply().  You can read more about ore.groupApply() here: https://blogs.oracle.com/R/entry/analyzing_big_data_using_the1 Here is an example of how we ask ORE to take our IRR_DATA table in the database, split it by the ACCOUNT column, apply a function that calls our SimpleMWRR() calculation, and then combine the results. (If you are following along at home, be sure to have installed our myIRR package on your database server via  “R CMD INSTALL myIRR”). The interesting thing about ore.groupApply is that the calculation is not actually performed in my desktop R environment from which I am running.  What actually happens is that ore.groupApply uses the Oracle database to perform the work.  And the Oracle database is what actually splits the IRR_DATA table by ACCOUNT.  Then the Oracle database takes the data for each account and sends it to an embedded R engine running on the database server to apply our R function.  Then the Oracle database combines all the individual results from the calls to the R function. This is significant because now the embedded R engine only needs to deal with the data for a single account at a time.  Regardless of whether we have 20 accounts or 1 million accounts or more, the R engine that performs the calculation does not care.  Given that normal R has a finite amount of memory to hold data, the ore.groupApply approach overcomes the R memory scalability problem since we only need to fit the data from a single account in R memory (not all of the data for all of the accounts). Additionally, the IRR_DATA does not need to be sent from the database to my desktop R program.  Even though I am invoking ore.groupApply from my desktop R program, because the actual SimpleMWRR calculation is run by the embedded R engine on the database server, the IRR_DATA does not need to leave the database server- this is both a performance benefit because network transmission of large amounts of data take time and a security benefit because it is harder to protect private data once you start shipping around your intranet. Another benefit, which we will discuss in a few paragraphs, is the ability to leverage Oracle database parallelism to run these calculations for dozens of accounts at once. From Walking to Running ore.groupApply is rather nice, but it still has the drawback that I run this from a desktop R instance.  This is not ideal for integrating into typical operational processes like nightly data warehouse refreshes or monthly statement generation.  But, this is not an issue for ORE.  Oracle R Enterprise lets us run this from the database using regular SQL, which is easily integrated into standard operations.  That is extremely exciting and the way we actually did these calculations in the customer proof. As part of Oracle R Enterprise, it provides a SQL equivalent to ore.groupApply which it refers to as “rqGroupEval”.  To use rqGroupEval via SQL, there is a bit of simple setup needed.  Basically, the Oracle Database needs to know the structure of the input table and the grouping column, which we are able to define using the database’s pipeline table function mechanisms. Here is the setup script: At this point, our initial setup of rqGroupEval is done for the IRR_DATA table.  The next step is to define our R function to the database.  We do that via a call to ORE’s rqScriptCreate. Now we can test it.  The SQL you use to run rqGroupEval uses the Oracle database pipeline table function syntax.  The first argument to irr_dataGroupEval is a cursor defining our input.  You can add additional where clauses and subqueries to this cursor as appropriate.  The second argument is any additional inputs to the R function.  The third argument is the text of a dummy select statement.  The dummy select statement is used by the database to identify the columns and datatypes to expect the R function to return.  The fourth argument is the column of the input table to split/group by.  The final argument is the name of the R function as you defined it when you called rqScriptCreate(). The Real-World Results In our real customer proof-of-concept, we had more sophisticated calculation requirements than shown in this simplified blog example.  For instance, we had to perform the rate of return calculations for 5 separate time periods, so the R code was enhanced to do so.  In addition, some accounts needed a time-weighted rate of return to be calculated, so we extended our approach and added an R function to do that.  And finally, there were also a few more real-world data irregularities that we needed to account for, so we added logic to our R functions to deal with those exceptions.  For the full-scale customer test, we loaded the customer data onto a Half-Rack Exadata X2-2 Database Machine.  As our half-rack had 48 physical cores (and 96 threads if you consider hyperthreading), we wanted to take advantage of that CPU horsepower to speed up our calculations.  To do so with ORE, it is as simple as leveraging the Oracle Database Parallel Query features.  Let’s look at the SQL used in the customer proof: Notice that we use a parallel hint on the cursor that is the input to our rqGroupEval function.  That is all we need to do to enable Oracle to use parallel R engines. Here are a few screenshots of what this SQL looked like in the Real-Time SQL Monitor when we ran this during the proof of concept (hint: you might need to right-click on these images to be able to view the images full-screen to see the entire image): From the above, you can notice a few things (numbers 1 thru 5 below correspond with highlighted numbers on the images above.  You may need to right click on the above images and view the images full-screen to see the entire image): The SQL completed in 110 seconds (1.8minutes) We calculated rate of returns for 5 time periods for each of 911k accounts (the number of actual rows returned by the IRRSTAGEGROUPEVAL operation) We accessed 103m rows of detailed cash flow/market value data (the number of actual rows returned by the IRR_STAGE2 operation) We ran with 72 degrees of parallelism spread across 4 database servers Most of our 110seconds was spent in the “External Procedure call” event On average, we performed 8,200 executions of our R function per second (110s/911k accounts) On average, each execution was passed 110 rows of data (103m detail rows/911k accounts) On average, we did 41,000 single time period rate of return calculations per second (each of the 8,200 executions of our R function did rate of return calculations for 5 time periods) On average, we processed over 900,000 rows of database data in R per second (103m detail rows/110s) R + Oracle R Enterprise: Best of R + Best of Oracle Database This blog post series started by describing a real customer problem: how to perform a lot of calculations on a lot of data in a short period of time.  While standard R proved to be a very good fit for writing the necessary calculations, the challenge of working with a lot of data in a short period of time remained. This blog post series showed how Oracle R Enterprise enables R to be used in conjunction with the Oracle Database to overcome the data volume and performance issues (as well as simplifying the operations and security issues).  It also showed that we could calculate 5 time periods of rate of returns for almost a million individual accounts in less than 2 minutes. In a future post, we will take the same R function and show how Oracle R Connector for Hadoop can be used in the Hadoop world.  In that next post, instead of having our data in an Oracle database, our data will live in Hadoop and we will how to use the Oracle R Connector for Hadoop and other Oracle Big Data Connectors to move data between Hadoop, R, and the Oracle Database easily.

  Read the article

• HTML Tidy in NetBeans IDE (Part 2)

  - by Geertjan

  This is what I was aiming for in the previous blog entry: What you can see above (especially if you click to enlarge it) is that I have HTML Tidy integrated into the NetBeans analyzer functionality, which is pluggable from 7.2 onwards. Well, if you set an implementation dependency on "Static Analysis Core", since it's not an official API yet. Also, the scopes of the analyzer functionality are not pluggable. That means you can 'only' set the analyzer's scope to one or more projects, one or more packages, or one or more files. Not one or more folders, which means you can't have a bunch off HTML files in a folder that you access via the Favorites window and then run the analyzer on that folder (or on multiple folders). Thus, to try out my new code, I had to put some HTML files into a package inside a Java application. Then I chose that package as the scope of the analyzer. Then I ran all the analyzers (i.e., standard NetBeans Java hints, FindBugs, as well as my HTML Tidy extension) on that package. The screenshot above is the result. Here's all the code for the above, which is a port of the Action code from the previous blog entry into a new Analyzer implementation: import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import java.util.ArrayList; import java.util.Collections; import java.util.List; import javax.swing.JComponent; import javax.swing.text.Document; import org.netbeans.api.fileinfo.NonRecursiveFolder; import org.netbeans.modules.analysis.spi.Analyzer; import org.netbeans.modules.analysis.spi.Analyzer.AnalyzerFactory; import org.netbeans.modules.analysis.spi.Analyzer.Context; import org.netbeans.modules.analysis.spi.Analyzer.CustomizerProvider; import org.netbeans.modules.analysis.spi.Analyzer.WarningDescription; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.ErrorDescriptionFactory; import org.netbeans.spi.editor.hints.Severity; import org.openide.cookies.EditorCookie; import org.openide.filesystems.FileObject; import org.openide.loaders.DataObject; import org.openide.util.Exceptions; import org.openide.util.lookup.ServiceProvider; import org.w3c.tidy.Tidy; public class TidyAnalyzer implements Analyzer {     private final Context ctx;     private TidyAnalyzer(Context cntxt) {         this.ctx = cntxt;     }     @Override     public Iterable<? extends ErrorDescription> analyze() {         List<ErrorDescription> result = new ArrayList<ErrorDescription>();         for (NonRecursiveFolder sr : ctx.getScope().getFolders()) {             FileObject folder = sr.getFolder();             for (FileObject fo : folder.getChildren()) {                 for (ErrorDescription ed : doRunHTMLTidy(fo)) {                     if (fo.getMIMEType().equals("text/html")) {                         result.add(ed);                     }                 }             }         }         return result;     }     private List<ErrorDescription> doRunHTMLTidy(FileObject sr) {         final List<ErrorDescription> result = new ArrayList<ErrorDescription>();         Tidy tidy = new Tidy();         StringWriter stringWriter = new StringWriter();         PrintWriter errorWriter = new PrintWriter(stringWriter);         tidy.setErrout(errorWriter);         try {             Document doc = DataObject.find(sr).getLookup().lookup(EditorCookie.class).openDocument();             tidy.parse(sr.getInputStream(), System.out);             String[] split = stringWriter.toString().split("\n");             for (String string : split) {                 //Bit of ugly string parsing coming up:                 if (string.startsWith("line")) {                     final int end = string.indexOf(" c");                     int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", ""));                     string = string.substring(string.indexOf(": ")).replace(":", "");                     result.add(ErrorDescriptionFactory.createErrorDescription(                             Severity.WARNING,                             string,                             doc,                             lineNumber));                 }             }         } catch (IOException ex) {             Exceptions.printStackTrace(ex);         }         return result;     }     @Override     public boolean cancel() {         return true;     }     @ServiceProvider(service = AnalyzerFactory.class)     public static final class MyAnalyzerFactory extends AnalyzerFactory {         public MyAnalyzerFactory() {             super("htmltidy", "HTML Tidy", "org/jtidy/format_misc.gif");         }         public Iterable<? extends WarningDescription> getWarnings() {             return Collections.EMPTY_LIST;         }         @Override         public <D, C extends JComponent> CustomizerProvider<D, C> getCustomizerProvider() {             return null;         }         @Override         public Analyzer createAnalyzer(Context cntxt) {             return new TidyAnalyzer(cntxt);         }     } } The above only works on packages, not on projects and not on individual files.

  Read the article

• HTML Tidy in NetBeans IDE

  - by Geertjan

  First step in integrating HTML Tidy (via its JTidy implementation) into NetBeans IDE: The reason why I started doing this is because I want to integrate this into the pluggable analyzer functionality of NetBeans IDE that I recently blogged about, i.e., where the FindBugs functionality is found. So a logical first step is to get it working in an Action class, after which I can port it into the analyzer infrastructure: import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionReferences; import org.openide.awt.ActionRegistration; import org.openide.cookies.EditorCookie; import org.openide.cookies.LineCookie; import org.openide.loaders.DataObject; import org.openide.text.Line; import org.openide.text.Line.ShowOpenType; import org.openide.util.Exceptions; import org.openide.util.NbBundle.Messages; import org.openide.windows.IOProvider; import org.openide.windows.InputOutput; import org.openide.windows.OutputEvent; import org.openide.windows.OutputListener; import org.openide.windows.OutputWriter; import org.w3c.tidy.Tidy; @ActionID(     category = "Tools", id = "org.jtidy.TidyAction") @ActionRegistration(     displayName = "#CTL_TidyAction") @ActionReferences({     @ActionReference(path = "Loaders/text/html/Actions", position = 150),     @ActionReference(path = "Editors/text/html/Popup", position = 750) }) @Messages("CTL_TidyAction=Run HTML Tidy") public final class TidyAction implements ActionListener {     private final DataObject context;     private final OutputWriter writer;     private EditorCookie ec = null;     public TidyAction(DataObject context) {         this.context = context;         ec = context.getLookup().lookup(org.openide.cookies.EditorCookie.class);         InputOutput io = IOProvider.getDefault().getIO("HTML Tidy", false);         io.select();         writer = io.getOut();     }     @Override     public void actionPerformed(ActionEvent ev) {         Tidy tidy = new Tidy();         try {             writer.reset();             StringWriter stringWriter = new StringWriter();             PrintWriter errorWriter = new PrintWriter(stringWriter);             tidy.setErrout(errorWriter);             tidy.parse(context.getPrimaryFile().getInputStream(), System.out);             String[] split = stringWriter.toString().split("\n");             for (final String string : split) {                 final int end = string.indexOf(" c");                 if (string.startsWith("line")) {                     writer.println(string, new OutputListener() {                         @Override                         public void outputLineAction(OutputEvent oe) {                             LineCookie lc = context.getLookup().lookup(LineCookie.class);                             int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", ""));                             Line line = lc.getLineSet().getOriginal(lineNumber - 1);                             line.show(ShowOpenType.OPEN, Line.ShowVisibilityType.FOCUS);                         }                         @Override                         public void outputLineSelected(OutputEvent oe) {}                         @Override                         public void outputLineCleared(OutputEvent oe) {}                     });                 }             }         } catch (IOException ex) {             Exceptions.printStackTrace(ex);         }     } } The string parsing above is ugly but gets the job done for now. A problem integrating this into the pluggable analyzer functionality is the limitation of its scope. The analyzer lets you select one or more projects, or individual files, but not a folder. So it doesn't work on folders in the Favorites window, for example, which is where I'd like to apply HTML Tidy, across multiple folders via the analyzer functionality. That's a bit of a bummer that I'm hoping to get around somehow.

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >