Search Results

Search found 4835 results on 194 pages for 'svn dump'.

Page 159/194 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• Computer Freezes with "Bugcheck 0" on Windows 7. How do I figure out why?

  - by George Stocker

  After about 10 minutes of running, my computer will hang, exhibiting the following symptoms: Both monitors act as if there is no image being sent to them (on, but blacked out) The CAPS Lock key on the keyboard will not respond. The computer appears to still be running: CPU Fan is whirring. When I reboot, Windows says "The previous shutdown was unexpected." I've enabled the 'don't automatically restart' on an error, and asked the computer to make a memory dump whenever it crashes, but it hasn't done either. The problem is that there's no bugcheck for me to go off of, so there's no way for me to determine what the cause is (I think). Here are my system specs: Intel Core 2 Duo E6750 Gigabyte P35C-DS3R w/ 4.00 GB (DDR2 Ram) Nvidia 8800 GT Windows 7 I've tried running the Windows Memory checker, but the system also freezes when using that after about 10 minutes as well. How can I diagnose the problem with no bugcheck and no ability to run a memory checker? Update Running Memtest86 also causes the computer to crash (looks like it doesn't make it through a full pass - it was only running for about 10 minutes when the PC stopped responding).

  Read the article

• How to clone MySQL DB? Errors with CREATE VIEW/SHOW VIEW privileges

  - by user38071

  Running MySQL 5.0.32 on Debian 4.0 (Etch). I'm trying to clone a WordPress MySQL database completely (structure and data) on the same server. I tried doing a dump to a .sql file and an import into a new empty database from the command line, but the import fails with errors saying the user does not have the "SHOW VIEW" or "CREATE VIEW" privilege. Trying it with PHPMyAdmin doesn't work either. I also tried doing this with the MySQL root user (not named "root" though) and it shows an "Access Denied" error. I'm terribly confused as to where the problem is. Any pointers on cloning a MySQL DB and granting all privileges to a user account would be great (specifically for MySQL 5.0.32). The SHOW GRANTS command for the existing user works (the one who has privileges over the source database). It shows that the user has all privileges granted. I created a new user and database. Here's what I see with the grant commands. $ mysql -A -umyrootaccount --password=myrootaccountpassword mysql> grant all privileges on `newtarget_db`.* to 'newtestuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db' mysql> grant all privileges on `newtarget_db`.* to 'existingsourcedbuser'@'localhost'; ERROR 1044 (42000): Access denied for user 'myrootaccount'@'localhost' to database 'newtarget_db'

  Read the article

• How to create hash or yml from top level attributes values of node?

  - by Sarah Haskins

  I have a chef recipe where I want to take all of the attributes under node['cfn']['environment'] and write them to a yml file. I could do something like this (it works fine): content = { "environment_class" => node['cfn']['environment']['environment_class'], "node_id" => node['cfn']['environment']['node_id'], "reporting_prefix" => node['cfn']['environment']['reporting_prefix'], "cfn_signal_url" => node['cfn']['environment']['signal_url'] } yml_string = YAML::dump(content) file "/etc/configuration/environment/platform.yml" do mode 0644 action :create content "#{yml_string}" end But I don't like that I have to explicitly list out the names of the attributes. If later I add a new attributes it would be nice if it automatically was included in the written out yml file. So I tried something like this: yml_string = node['cfn']['environment'].to_yaml But because the node is actually a Mash, I get a platform.yml file like this (it contains a lot of unexpected nesting that I don't want): --- !ruby/object:Chef::Node::Attribute normal: tags: [] cfn: environment: &25793640 reporting_prefix: Platform2 signal_url: https://cloudformation-waitcondition-us-east-1.s3.amazonaws.com/... environment_class: Dev node_id: i-908adf9 ... But what I want is this: ---- reporting_prefix: Platform2 signal_url: https://cloudformation-waitcondition-us-east-1.s3.amazonaws.com/... environment_class: Dev node_id: i-908adf9 How can I achieve the desired yml output w/o explicitly listing the attributes by name?

  Read the article

• Fix bad superblock on logical partition

  - by Chris

  I was following http://www.howtoforge.com/linux_resi...xt3_partitions and when i reboot and run: root@Microknoppix:/home/knoppix# fsck -n /dev/sda7 fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda7 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> so i ran e2fsck with all the block numbers that you need (forget exactly what tool i used to find where the superblocks are hidden) no dice then i ran testdisk and had it look for the superblock, no results anyone have any ideas? fdisk -l for reference: root@Microknoppix:/home/knoppix# fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x97646c29 Device Boot Start End Blocks Id System /dev/sda1 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 38912 312046593 f W95 Ext'd (LBA) /dev/sda5 64 326 2104320 82 Linux swap / Solaris /dev/sda6 * 327 2938 20972544 83 Linux /dev/sda7 2938 38912 288968672+ 83 Linux To be honest it looks like I lost it... Next step if that happens is to dump the partition to an image file and hope i can find or write some software to parse through the data looking for known file headers, i think.

  Read the article

• Most cost efficient way to backup Subversion data to S3?

  - by sludge

  I'm looking at using S3 as an offsite backup repo for my Subversion database. When I dump my SVN database, it's about 10 gigabytes. I would like to avoid the charge of uploading that data repeatedly. The anatomy of this large file such that new changes to Subversion modify the tail of the file, with everything else staying the same. Because Amazon S3 does not allow you to "patch" files with changes, I will have to upload ten gigs every time I instantiate a backup after doing a simple submit to Subversion. Here are the options as I see them: Option 1 I am looking at duplicity which has --volsize which splits data over an amount of megs. Is it possible to split the Subversion dumps using this so further incremental backups are measured in megabytes? Option 2 Can I just backup the hot subversion repository? This seems like a bad idea if it is in the middle of writing a submit. However, I have the option of taking the repo offline between the hours of midnight and 4am. Each revision in my Berkeley DB uses a file as its record.

  Read the article

• IIS 7.5 returning 404 for unknown host names

  - by WaldenL

  This just doesn't seem correct to me, so I'm looking for someone to tell me how I've misconfigured IIS... Configuration is IIS7.5 (2008R2), without SP1. I have IIS 7.5 configured w/several sites. ALL sites have hostnames defined in the bindings, there is NO site w/out a hostname. However, if I request an unknown hostname from the server IIS (technically Microsoft-HTTPAPI/2.0) return a 404 error, not a 400 error. I would expect a 400 (or some other major error) rather than a lowly 404. This causes a problem when I have nginx in front of multiple IISs and want to stop a site so nginx takes it out of rotation. Since IIS still returns a 404 for the request even when there is no active site for that name, nginx doesn't know the server is dead. NB: IIS returns the 404 regardless of whether there is a server, but it's stopped, or there is no server. Thoughts? Solutions? -- Additional info: OK, I added a site on a port other than 80 (5000) and then on a connection to that port asked for a site that doesn't exist, and I get the expected error 400 (Invalid hostname). So, while IIS isn't listening for generic (no host name) connections on port 80 it would seem that something is. Any ideas how to get HTTPSys to dump the list of what it's listening for?

  Read the article

• Errors generating gpg keypair

  - by Evan Lynch

  I posted this originally on stackoverflow, but was told that it was offtopic and this would be the better place to post it, so I am reposting it here and deleting my original topic. I have a rather old PGP key, but I've long ago lost the private key for it, so I'm trying to generate a new key with GPG on Windows 7. While it technically generates the key, GPA crashes every time I generate the keypair. I've tried this four times now and just downloaded what appears to be the latest version of Gpg4Win and am still receiving this problem. A comment on my original post informed me that GPA crashes is not a very good description of the problem, but unfortunately I can't do much better than that: all it tells me is "gpa.exe has crashed and will close now", I don't get an error dump or anything. Is there anything I can do to fix this, or is this just a bug in the latest version of Gpg4Win? Here are the specs of GPG that I'm using: GPA 0.9.4. GnuPG 2.0.22. My operating system is Windows 7 64 Bit, and I have 5 GB of RAM. Also, I was told to try generating the keypair on the command line but can't find any documentation for how to do this in Windows 7. If anyone could link me to current documentation for this, that would be a good workaround for solving this problem.

  Read the article

• Is there a tool that can test what SSL/TLS cipher suites a particular website offers?

  - by Jeremy Powell

  Is there a tool that can test what SSL/TLS cipher suites a particular website offers? I've tried openssl, but if you examine the output: $ echo -n | openssl s_client -connect www.google.com:443 CONNECTED(00000003) depth=1 /C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA verify error:num=20:unable to get local issuer certificate verify return:0 --- Certificate chain 0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com i:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA 1 s:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- MIIDITCCAoqgAwIBAgIQL9+89q6RUm0PmqPfQDQ+mjANBgkqhkiG9w0BAQUFADBM MQswCQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg THRkLjEWMBQGA1UEAxMNVGhhd3RlIFNHQyBDQTAeFw0wOTEyMTgwMDAwMDBaFw0x MTEyMTgyMzU5NTlaMGgxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlh MRYwFAYDVQQHFA1Nb3VudGFpbiBWaWV3MRMwEQYDVQQKFApHb29nbGUgSW5jMRcw FQYDVQQDFA53d3cuZ29vZ2xlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC gYEA6PmGD5D6htffvXImttdEAoN4c9kCKO+IRTn7EOh8rqk41XXGOOsKFQebg+jN gtXj9xVoRaELGYW84u+E593y17iYwqG7tcFR39SDAqc9BkJb4SLD3muFXxzW2k6L 05vuuWciKh0R73mkszeK9P4Y/bz5RiNQl/Os/CRGK1w7t0UCAwEAAaOB5zCB5DAM BgNVHRMBAf8EAjAAMDYGA1UdHwQvMC0wK6ApoCeGJWh0dHA6Ly9jcmwudGhhd3Rl LmNvbS9UaGF3dGVTR0NDQS5jcmwwKAYDVR0lBCEwHwYIKwYBBQUHAwEGCCsGAQUF BwMCBglghkgBhvhCBAEwcgYIKwYBBQUHAQEEZjBkMCIGCCsGAQUFBzABhhZodHRw Oi8vb2NzcC50aGF3dGUuY29tMD4GCCsGAQUFBzAChjJodHRwOi8vd3d3LnRoYXd0 ZS5jb20vcmVwb3NpdG9yeS9UaGF3dGVfU0dDX0NBLmNydDANBgkqhkiG9w0BAQUF AAOBgQCfQ89bxFApsb/isJr/aiEdLRLDLE5a+RLizrmCUi3nHX4adpaQedEkUjh5 u2ONgJd8IyAPkU0Wueru9G2Jysa9zCRo1kNbzipYvzwY4OA8Ys+WAi0oR1A04Se6 z5nRUP8pJcA2NhUzUnC+MY+f6H/nEQyNv4SgQhqAibAxWEEHXw== -----END CERTIFICATE----- subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com issuer=/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA --- No client certificate CA names sent --- SSL handshake has read 1777 bytes and written 316 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 748E2B5FEFF9EA065DA2F04A06FBF456502F3E64DF1B4FF054F54817C473270C Session-ID-ctx: Master-Key: C4284AE7D76421F782A822B3780FA9677A726A25E1258160CA30D346D65C5F4049DA3D10A41F3FA4816DD9606197FAE5 Key-Arg : None Start Time: 1266259321 Timeout : 300 (sec) Verify return code: 20 (unable to get local issuer certificate) --- it just shows that the cipher suite is something with AES256-SHA. I know I could grep through the hex dump of the conversation, but I was hoping for something a little more elegant. I would prefer Linux tools, but Windows (or other) would be fine. This question is motivated by the security testing I do for PCI and general penetration testing. Update: GregS points out below that the SSL server picks from the cipher suites of the client. So it seems I would need to test all cipher suites one at a time. I think I can hack something together, but is there a tool that does particularly this?

  Read the article

• Would like to change audio codec, but keep video settings with ffmpeg

  - by Craig Tataryn

  I have a video for which I'd like to convert the audio codec to AAC 320 kbps / 44.100 kHz. What would I use for ffmpeg switches such that all the video settings and codec remain the same, but only the audio codec and settings change? Here's my video: $ ffmpeg -i Winnipeg.rb\ Scala-Talk.mov FFmpeg version SVN-r25375, Copyright (c) 2000-2010 the FFmpeg developers built on Oct 6 2010 13:02:41 with gcc 4.2.1 (Apple Inc. build 5664) configuration: --enable-libmp3lame --enable-shared --disable-mmx --arch=x86_64 libavutil 50.32. 2 / 50.32. 2 libavcore 0. 9. 1 / 0. 9. 1 libavcodec 52.92. 0 / 52.92. 0 libavformat 52.80. 0 / 52.80. 0 libavdevice 52. 2. 2 / 52. 2. 2 libavfilter 1.48. 0 / 1.48. 0 libswscale 0.12. 0 / 0.12. 0 Seems stream 0 codec frame rate differs from container frame rate: 2000.00 (2000/1) -> 10.00 (10/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Winnipeg.rb Scala-Talk.mov': Metadata: major_brand : qt minor_version : 537199360 compatible_brands: qt Duration: 01:10:53.00, start: 0.000000, bitrate: 283 kb/s Stream #0.0(eng): Video: h264, yuv420p, 800x598, 94 kb/s, 10 fps, 10 tbr, 1k tbn, 2k tbc Stream #0.1(eng): Audio: adpcm_ima_qt, 22050 Hz, 1 channels, s16 Stream #0.2(eng): Audio: adpcm_ima_qt, 22050 Hz, 1 channels, s16 At least one output file must be specified Many thanks in advance! One with with ffmpeg I've never been able to grok is how to just "tweak" files without having to regurgitate every little setting for things you don't want changes.

  Read the article

• Time Machine vs Source Control?

  - by Blub

  Finally got convinced to start using some kind of version control for my code instead of zipping down a copy of the project at the end of each day. Downloaded Tortoise SVN and used it to create a repository localy on my hdd. I've been using it for 2 days now but I have to say that using it is actually more hassle than just copying the project manually in explorer. Sure, you only store incremental changes but with the cheap disks of today I can't really say that's an argument when you only have small projects. I haven't realy found a quick way to browse the older versions of my files eighter. What I want is an infinite undo that is completely transparent while I code, if I save the file I want a backup. I don't want to check out, check in and don't even get me started on moving files. I haven't tried Time Machine for OS X but it looks like it's exactly what I'm looking for. Does such a program exist for windows? Preferably free and with some kind of tagging-system so I can tag a timestamp when the project is working etc. Maybe should add that I mostly work alone on a single computer. Update: Some of you asked why I want backup. Since I work alone it's mostly to allow me to quickly hack up a solution without worrying that something will screw up.

  Read the article

• Apache reverse proxy with VirtualHost not serving a page

  - by Mr Aleph

  I have an Apache reverse proxy set to move requests to a Tomcat Applet. The config is similar to: <VirtualHost 100.100.100.100:80> ProxyPass /AppName/App http://1.1.1.1/AppName/App ProxyPassReverse /AppName/App http://1.1.1.1/AppName/App </VirtualHost> I also have a page called summary.html that exists on 1.1.1.1 as: http://1.1.1.1/AppName/summary.html When I browse directly to it I have no problem viewing it, however if I try to get there via the reverse proxy I get a blank page. Wireshark shows me a 503, but this one is coming from the Apache reverse proxy (IP 100.100.100.100) and not the Tomcat (IP 1.1.1.1). Should I add http://1.1.1.1/AppName/ to the config? How? I tried it but I get a blank page, however this one shows on the URL bar of the browser the internal IP of the Tomcat, so, no go. Help is appreciated. Thanks. EDIT: This is the dump from Wireshark: GET /AppName/ HTTP/1.1 Host: 100.100.100.100 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Cache-Control: max-age=0 Accept-Language: en-us Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 404 Not Found Date: Tue, 30 Jan 2012 09:08:51 GMT Server: Apache Content-Length: 1 Connection: close Content-Type: text/html; charset=iso-8859-1

  Read the article

• Mac Mavericks, ngircd localhost works, private IP doesn't

  - by user221945

  I have configured ngircd to listen on my private ip address. It doesn't. Localhost works fine. Configuration test: ngIRCd 21-IDENT+IPv6+IRCPLUS+SSL+SYSLOG+TCPWRAP+ZLIB-x86_64/apple/darwin13.2.0 Copyright (c)2001-2013 Alexander Barton () and Contributors. Homepage: http://ngircd.barton.de/ This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Reading configuration from "/opt/local/etc/ngircd.conf" ... OK, press enter to see a dump of your server configuration ... [GLOBAL] Name = irc.bellbookandpistol.com AdminInfo1 = Jaedreth AdminInfo2 = San Diego County CA, US AdminEMail = [email protected] HelpFile = /opt/local/share/doc/ngircd/Commands.txt Info = Server Info Text Listen = 10.0.1.5,127.0.0.1 MotdFile = MotdPhrase = "Welcome to irc.bellbookandpistol.com" Password = PidFile = Ports = 6667 ServerGID = wheel ServerUID = root [LIMITS] ConnectRetry = 60 IdleTimeout = 0 MaxConnections = 0 MaxConnectionsIP = 6 MaxJoins = -1 MaxNickLength = 9 MaxListSize = 0 PingTimeout = 120 PongTimeout = 20 [OPTIONS] AllowedChannelTypes = #&+ AllowRemoteOper = no ChrootDir = CloakHost = CloakHostModeX = CloakHostSalt = kBih5mu\kVI!DC6eifT(hd4m/0'zb/=: CloakUserToNick = no ConnectIPv4 = yes ConnectIPv6 = no DefaultUserModes = DNS = yes IncludeDir = /opt/local/etc/ngircd.conf.d MorePrivacy = no NoticeAuth = no OperCanUseMode = no OperChanPAutoOp = yes OperServerMode = no RequireAuthPing = no ScrubCTCP = no SyslogFacility = local5 WebircPassword = [SSL] CertFile = CipherList = HIGH:!aNULL:@STRENGTH DHFile = KeyFile = KeyFilePassword = Ports = [OPERATOR] Name = [REDACTED] Password = [REDACTED] Mask = [CHANNEL] Name = #BBP Modes = tnk Key = MaxUsers = 0 Topic = Welcome to the Bell, Book and Pistol IRC Server! KeyFile = As you can see, it should be listening on 10.0.1.5, but it isn't. After turning on Apache manually, port 80 works on 10.0.1.5, but port 6667 doesn't. It only works on localhost. Is there some terminal command I could use or some config file I could edit to get this to work?

  Read the article

• How to embed/hardcode SRT subtitles into mp4 videos with VLC?

  - by Jens Bannmann

  I'm looking for a way to "burn in" or render/rembed/hardcode subtitles (from an SRT file) into an MP4 video with VLC. But no matter what options I use, it never works properly. I get a file that plays video way too fast (audio is normal), or one that plays normally, but actually does not have embedded subtitles. Also, with some options (like the one below) it does not play in QuickTime, only in VLC. So the main question is: how can I make this work in VLC? Secondary questions are: How do I decide which options I should set? Which settings are best if I want to leave the file bitrate etc. the same as much as possible, only embed subtitles? It seems I cannot leave the field empty or Video/Audio unchecked, so I guess I would first need to figure out the original audio and video bitrate. What do the "Scale" and "Channels" options mean? ... none of which are answered within the VLC documentation. For example, this is one set of options I used in the "Advanced Open File…" dialog: Advanced Open File… myFileName.mp4 [ ] Treat as a pipe rather than as a file [x] Load subtitles file: mySubtitleFileName.srt [ ] Play another media synchronously [x] Streaming/Saving Streaming and Transcoding Options [ ] Display the stream locally (o) File [outputFileName.mp4 ] [ ] Dump raw input Encapsulation Method: (MPEG 4 ) Transcoding options [x] Video (mp4v ) Bitrate (kb/s) [256 ] Scale [1 ] [x] Audio (mp3 ) Bitrate (kb/s) [128 ] Channels [1 ]

  Read the article

• Which Revision Control Software to use for Personal Dropbox?

  - by wag2639

  I want to set up a sync repositiory that would be similar to Dropbox. Goals/Requirements: Free (Open Source very preferable) Linux host (probably Ubuntu) Windows/Mac/Linux clients Potential for multiple users with limited access (optional) Preferable easy, doesn't necessarily need to be automatic Revision control very preferable Basically, I want to be able to use multiple computers, possible with different OS's, and be able to access, use, and sync files across all of them. I also want to have a local copy of the repository for when I'm not connected to the network (as if I'm working on a laptop, I want to keep a local repository to keep revision and merge later with "master" repository). For example, I'm editing a few pictures on my laptop during the day outside of my network, but when I get home, I would like to sync the changes, including incremental changes, with my desktop at home. I would also like my roommates to be able to access and use this repository too but limit access to certain files. For example, I may want to use this to backup financial records but wouldn't want them to have access to those files. I'm a programmer and familiar with SVN but I know that wouldn't be the most appropriate since it doesn't handle binaries well and doesn't keep a local repository. I know better choices exist but I don't really know them well enough to choose the best one.

  Read the article

• Small office network setups

  - by user39822

  I work at a small office and we're overhauling our network setup there. We're a web dev company and at the moment we have 50+ production sites running on the same machine that runs our internal email, which is just plain stupid. We're moving all our client hosting off site and are now looking for something to run our internal office requirement. Below is a brain dump: Equal amount of Mac & PC, about 25 machines in total. We need a central "server" to host files that should be accessible everyone as a "network drive". If possible we'd like to use low cost hardware for this (Mac or Win based). Disk space should be upward of 1TB. Ideally we should also be able to run a small web server on this machine (LAMP stack) to run some planning and billing applications we wrote ourselves. We need some sort of MS Exchange alternative for things like a shared calendar and especially being able to set Out of Office replies. We have one printer that is connected to the network Setup should be something can preferably be managed easily via a graphical interface and NOT require command line skills. Users want to keep using Apple Mail or MS Outlook After a quick google I came across the Zimbra collaboration suite, can anyone recommend this or any other solution for our office?

  Read the article

• How to avoid index.php in Zend Framework route using Nginx rewrite

  - by Adam Benayoun

  I am trying to get rid of index.php from the default Zend Framework route. I think it should be corrected at the server level and not on the application. (Correct me if I am wrong, but I think doing it on the server side is more efficient). I run Nginx 0.7.1 and php-fpm 5.3.3 This is my nginx configuration server { listen *:80; server_name domain; root /path/to/http; index index.php; client_max_body_size 30m; location / { try_files $uri $uri/ /index.php?$args; } location /min { try_files $uri $uri/ /min/index.php?q=; } location /blog { try_files $uri $uri/ /blog/index.php; } location /apc { try_files $uri $uri/ /apc.php$args; } location ~ \.php { include /usr/local/etc/nginx/conf.d/params/fastcgi_params_local; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param SERVER_NAME $http_host; fastcgi_pass 127.0.0.1:9000; } location ~* ^.+\.(ht|svn)$ { deny all; } # Static files location location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { expires max; } } Basically www.domain.com/index.php/path/to/url and www.domain.com/path/to/url serves the same content. I'd like to fix this using nginx rewrite. Any help will be appreciated.

  Read the article

• Using udev to create a character device based on a driver being loaded

  - by SteveCB

  I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

  Read the article

• How To Investigate/Restore MySQL Permissions? MySQL ERROR 1045 (28000): Access denied for user

  - by Recc

  ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) Debian. mysqld is listening on 3306 supposedly Telnet to 3306 works Also tried binding it specifically yo localhost and then 127.0.0.1 which made no difference However: # netstat -ln | grep mysql unix 2 [ ACC ] STREAM LISTENING 78993 /var/run/mysqld/mysqld.sock # mysql -P3306 -ptest ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) Things I've tried: dpkg-reconfigure mysql-server-5.1 Doesn't help http://www.debian-administration.org/articles/442 Doesn't help This command (source): UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root'; FLUSH PRIVILEGES; Doesn't help, in fact: Query OK, 0 rows affected (0.00 sec) Rows matched: 0 Changed: 0 Warnings: 0 So might the user be deleted? Extremely unlikely as all this started after packages update a colleague did and some separate services started screwing around but my colleague said he removed the offenders. Theres more: while # mysqld_safe --skip-grant-tables is running one can access the data tables, only with the valid passwords! So there's users and some authentication takes place hence the 0 rows affected above. Can the privileges tables be damaged somehow and how can I recreate/restore them when my only way of getting a mysql console is to skip them? Can I spare my reinstall of MySQL? Either way I did get a dump of the DBs now that I could get in with the above mode.

  Read the article

• Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

  - by chriv

  I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

  Read the article

• Converting flv and mp4 video format to '.ogg' using FFmpeg

  - by user163906

  I have HostGator VPS server with FFmpeg installed. It allows me to convert .wmv to .flv as well as .mp4 files successfully using the following commands for flv and mp4: ffmpeg -i WantsABath.wmv -b 600k -r 24 -ar 22050 -ab 96k WantsABath.flv ffmpeg -i WantsABath.wmv WantsABath.mp4 but it won't allow me to convert any file format to .ogg. I tried using the command: ffmpeg -i input.mp4 -acodec libvorbis -vcodec libtheora -f ogv output.ogv by mondain but no luck with it. I am doubting that my VPS doesn't have libtheora installed. I tried configuring it by using SSH but I don't know how to make sure if it is installed or not. I tried checking with php_info but can't find anything regarding libtheora. Here's my FFmpeg version: FFmpeg version SVN-r19795, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-libmp3lame --enable-libvorbis --disable-mmx --enable-shared --prefix=/usr/ --enable-gpl libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.35. 0 / 52.35. 0 libavformat 52.38. 0 / 52.38. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 This details doean't show libtheor Can anyone please suggest me something?

  Read the article

• iTunes copy just metadata (song and album ratings, playlists) from iPod

  - by Jared Updike

  I have an iPod touch that I synched with my Windows computer (iTunes 9.0 I think) until my harddrive failed and I lost my entire library. I rebuilt the library (songs) from a year old backup (and various other source for songs) but my playlists and ratings are of course a year old. My iPod itself has most of the playlists and ratings I care most about (favorite songs and albums, rated 4 and 5, for example). I have a catch 22 situation where I feel nervous that I haven't backed up my iPod in around 4 months (when my drive failed) so I'd like to back it up as soon as possible... but if I back it up I have to clear all the songs and playlists and copy them back, which I can't really do since I need to rebuild my playlists on my computer first (using the data only available on my iPod!) The question: is there a better way to READ the information off my iPod than doing it manually, song by song and album by album and playlist by playlist (XML, text dump, database, spreadsheet, anything). In other words, mostly I want the information (metadata like ratings and playlists, not songs) copied off the iPod so I can more quickly get my iTunes library ratings and playlists re-built (manually) so I can finally wipe the music and back up my apps, etc. Then I'd like to copy the music back immediately. The part I'd like to avoid is manually navigating everything on my iPod to read through all the playlists and ratings (50 GB, 6,000+ songs) as I re-enter all of that data by hand. I've done a few dozen albums and it's pretty time consuming having to tap around on the iPod. Reading from a spreadsheet (for example, or XML which I could write a script to get into spreadsheet form) would probably help tremendously, plus then I'd have a backup of that information somewhere besides just my iPod.

  Read the article

• Can MySQL use multiple data directories on different physical storage devices

  - by sirlark

  I am running MySQL with its data dir on a 128Gb SSD. I am dealing with large datasets (~20Gb) that are loaded and processed weekly, each stored in a separate DB for the purposes of time point comparisons. Putting all the data into a single database in unfeasible because the performance on such large databases is already a problem. However, I cannot keep more than 6 datasets on the SSD at a time. Right now I am manually dumping the oldest to much larger 2Tb spinning disk every week, and dropping the database to make space for the new one. But if I need one of the 'archived' databases (a semi regular occurrence) I have to drop a current one (after dumping), reload it, do what I need to, then reverse the results. Is there a way to configure MySQL to use multiple data directories, say one on the SSD and one on the 2Tb spinning disk, and 'merge' them transparently? If I could do this, then archiving would no longer mean "moved out of the database entirely", but instead would mean "moved onto the slow physical device". The time taken to do my queries on a spinning disk would be less than that taken to completely dump, drop, load, drop, reload two entire databases, so this is a win. I thought of using something like unionfs but I can't think of a way to control which database gets stored on which physical drive, because it works by merging on a directory level (from what I understand) so I'm still stuck with using multiple directories. Any help appreciated, thanks in advance

  Read the article

• Are these three brand new sticks of RAM really dead?

  - by David Brown

  I'm working on a Dell Dimension 4700 desktop for a friend. It came with 512MB of DDR2 RAM (two sticks of 256MB). One morning, it started blue screening on startup with no helpful error messages. It refused to boot into any form of Windows installation, including Safe Mode, original recovery disk, and my custom Windows PE disk. It did boot into the Ultimate Boot CD, so I ran memtest86, which reported errors everywhere. I removed one stick of RAM and the system booted up just fine. I moved the remaining stick into each slot and the system continued to operate normally, so I came to the conclusion that the stick that I removed was dead. I ordered an exact replacement, along with 2 more sticks of 256MB DDR2 (again, exactly the same as the original), bringing the total system memory to 1GB. Upon installing the three brand new sticks, the system blue screened again, this time stating that win32k.sys attempted to write to read-only memory. I inserted my custom Windows PE disk in order to get a better look at the memory dump with BlueScreenView, but it refused to boot and produced another blue screen, but without an error message. I removed each new stick one-by-one, restarting each time. It continued to blue screen until I was left with only the original stick. I then tried inserting the new sticks in various different orders, but this only produced more blue screens. I reinserted all three sticks (along with the original) and ran memtest86 again, which reported errors all over the place. So, now I'm right back where I started. I don't think it could be the slots themselves, because I can plug the original stick into any slot and it works just fine. System setup reports each stick correctly and shows the total as 1GB, however. It just seems strange to me that all three brand new sticks of RAM could be dead on arrival. Is there something I missed? Or should I just go ahead and RMA them?

  Read the article

• Nginx fails upon proxying PUT requests

  - by PartlyCloudy

  Hi. I have an arbitrary web server that supports the full range of HTTP methods, including PUT for uploads. The server runs fine in all tests with different clients. I now wanted to set this server behind an nginx reverse proxy. However, each PUT request fails. The entity body is not forwarded to the backend web server. The header fields are sent, but not body. I searched the nginx proxy documentation and find several hints that PUT might not be supported. But I also found people running svn/ web dav stuff behind nginx, so it should work. Any ideas? Here is my config: server { listen 80; server_name my.domain.name; location / { proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://127.0.0.1:8000; } } Client == HTTP PUT ==> Nginx == HTTP Proxy ==> Backend Server The error.log shows no entries concerning this behaviour. Thanks in advance!

  Read the article

• OpenVPN-based VPN server on same system it's "protecting": feasible?

  - by Johnny Utahh

  Scenario: hosted machine (typically a VPS) serving wiki, svn, git, forums, email lists (eg: GNU mailman), Bugzilla (etc) privately to < 20 people. People not on team not allowed access. Seeking VPN-restricted access to said server. Have good user experience with OpenVPN-based servers/clients, but have yet to server-admin such systems. Otherwise, experienced Linux sysadmin. Target system: Ubuntu, probably 12.04. Seeking to put an OpenVPN process on above server to "protect" all the above-mentioned services, enabling only OpenVPN-authorized clients/processes to access above services. (Can easily acquire additional IP address(es) as needed for this setup.) Option: if absolutely needed, can employ an additional, dedicated, "VPN server" VPS simply to be my VPN server "front end." But prefer to have all server processes (VPN server plus other server apps) all running on same machine, if possible. Will consider further if dedicated-VPN-machine setup enables 1. easier installation/administration, 2. better/easier end-user experience, and/or 3. makes system significantly more secure. Any of above feasible? The main intention: create a VPN from purely-hosted resources, and not spend all the effort to make a non-VPN, secure site--which typically means "SSL wrapping" + all the continual webserver-application-update management. Let the VPN server deal with access security, and spend list time pushing said security "down" in the other apps/Apache.

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >