Search Results

Search found 4450 results on 178 pages for 'bashar kernel'.

Page 16/178 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• What does a linux device need to be seen by Hal?

  - by Jaime Soriano

  I'm trying to learn about device drivers on Linux Kernel, for that I've created three modules with: A bus type A device driver A fake device that does nothing now, only is registered Everything works fine, I can load the bus, the driver and the module that creates the device. Everything appears on sysfs, including the link between the device and the device driver that indicates that they are binded. And when the driver and device are loaded, I can see using udevadm monitor that also some events are provoked: KERNEL[1275564332.144997] add /module/bustest_driver (module) KERNEL[1275564332.145289] add /bus/bustest/drivers/bustest_example (drivers) UDEV [1275564332.157428] add /module/bustest_driver (module) UDEV [1275564332.157483] add /bus/bustest/drivers/bustest_example (drivers) KERNEL[1275564337.656650] add /module/bustest_device (module) KERNEL[1275564337.656817] add /devices/bustest_device (bustest) UDEV [1275564337.658294] add /module/bustest_device (module) UDEV [1275564337.664707] add /devices/bustest_device (bustest) But after everything, the device doesn't appear on hal. What else need a device to be seen by hal?

  Read the article

• Updating Debian kernel

  - by Devator

  I'm trying to update my Debian machine to 2.6.32-46 (which is the new stable). However, after doing apt-get update my apt-cache search linux-image shows me: linux-headers-2.6.32-5-486 - Header files for Linux 2.6.32-5-486 linux-headers-2.6.32-5-686-bigmem - Header files for Linux 2.6.32-5-686-bigmem linux-headers-2.6.32-5-686 - Header files for Linux 2.6.32-5-686 linux-headers-2.6.32-5-amd64 - Header files for Linux 2.6.32-5-amd64 linux-headers-2.6.32-5-openvz-686 - Header files for Linux 2.6.32-5-openvz-686 linux-headers-2.6.32-5-vserver-686-bigmem - Header files for Linux 2.6.32-5-vser ver-686-bigmem linux-headers-2.6.32-5-vserver-686 - Header files for Linux 2.6.32-5-vserver-686 linux-headers-2.6.32-5-xen-686 - Header files for Linux 2.6.32-5-xen-686 linux-image-2.6.32-5-486 - Linux 2.6.32 for old PCs linux-image-2.6.32-5-686-bigmem-dbg - Debugging infos for Linux 2.6.32-5-686-big mem linux-image-2.6.32-5-686-bigmem - Linux 2.6.32 for PCs with 4GB+ RAM linux-image-2.6.32-5-686 - Linux 2.6.32 for modern PCs linux-image-2.6.32-5-amd64 - Linux 2.6.32 for 64-bit PCs linux-image-2.6.32-5-openvz-686-dbg - Debugging infos for Linux 2.6.32-5-openvz- 686 linux-image-2.6.32-5-openvz-686 - Linux 2.6.32 for modern PCs, OpenVZ support linux-image-2.6.32-5-vserver-686-bigmem-dbg - Debugging infos for Linux 2.6.32-5 -vserver-686-bigmem linux-image-2.6.32-5-vserver-686-bigmem - Linux 2.6.32 for PCs with 4GB+ RAM, Li nux-VServer support linux-image-2.6.32-5-vserver-686 - Linux 2.6.32 for modern PCs, Linux-VServer su pport linux-image-2.6.32-5-xen-686-dbg - Debugging infos for Linux 2.6.32-5-xen-686 linux-image-2.6.32-5-xen-686 - Linux 2.6.32 for modern PCs, Xen dom0 support linux-image-2.6-486 - Linux 2.6 for old PCs (meta-package) linux-image-2.6-686-bigmem - Linux 2.6 for PCs with 4GB+ RAM (meta-package) linux-image-2.6-686 - Linux 2.6 for modern PCs (meta-package) linux-image-2.6-amd64 - Linux 2.6 for 64-bit PCs (meta-package) linux-image-2.6-openvz-686 - Linux 2.6 for modern PCs (meta-package), OpenVZ sup port linux-image-2.6-vserver-686-bigmem - Linux 2.6 for PCs with 4GB+ RAM (meta-packa ge), Linux-VServer support linux-image-2.6-vserver-686 - Linux 2.6 for modern PCs (meta-package), Linux-VSe rver support linux-image-2.6-xen-686 - Linux 2.6 for modern PCs (meta-package), Xen dom0 supp ort linux-image-486 - Linux for old PCs (meta-package) linux-image-686-bigmem - Linux for PCs with 4GB+ RAM (meta-package) linux-image-686 - Linux for modern PCs (meta-package) linux-image-amd64 - Linux for 64-bit PCs (meta-package) linux-image-openvz-686 - Linux for modern PCs (meta-package), OpenVZ support linux-image-vserver-686-bigmem - Linux for PCs with 4GB+ RAM (meta-package), Lin ux-VServer support linux-image-vserver-686 - Linux for modern PCs (meta-package), Linux-VServer sup port linux-image-xen-686 - Linux for modern PCs (meta-package), Xen dom0 support So, 2.6.32-46 doesn't seem to be found. How can I update to this kernel? My sources.list: ###### Debian Main Repos deb http://ftp.nl.debian.org/debian/ squeeze main contrib deb-src http://ftp.nl.debian.org/debian/ squeeze main contrib ###### Debian Update Repos deb http://security.debian.org/ squeeze/updates main contrib deb http://ftp.nl.debian.org/debian/ squeeze-proposed-updates main contrib deb-src http://security.debian.org/ squeeze/updates main contrib deb-src http://ftp.nl.debian.org/debian/ squeeze-proposed-updates main contrib

  Read the article

• Announcing Unbreakable Enterprise Kernel Release 3 for Oracle Linux

  - by Lenz Grimmer

  We are excited to announce the general availability of the Unbreakable Enterprise Kernel Release 3 for Oracle Linux 6. The Unbreakable Enterprise Kernel Release 3 (UEK R3) is Oracle's third major supported release of its heavily tested and optimized Linux kernel for Oracle Linux 6 on the x86_64 architecture. UEK R3 is based on mainline Linux version 3.8.13. Some notable highlights of this release include: Inclusion of DTrace for Linux into the kernel (no longer a separate kernel image). DTrace for Linux now supports probes for user-space statically defined tracing (USDT) in programs that have been modified to include embedded static probe points Production support for Linux containers (LXC) which were previously released as a technology preview Btrfs file system improvements (subvolume-aware quota groups, cross-subvolume reflinks, btrfs send/receive to transfer file system snapshots or incremental differences, file hole punching, hot-replacing of failed disk devices, device statistics) Improved support for Control Groups (cgroups)  The ext4 file system can now store the content of a small file inside the inode (inline_data) TCP fast open (TFO) can speed up the opening of successive TCP connections between two endpoints FUSE file system performance improvements on NUMA systems Support for the Intel Ivy Bridge (IVB) processor family Integration of the OpenFabrics Enterprise Distribution (OFED) 2.0 stack, supporting a wide range of Infinband protocols including updates to Oracle's Reliable Datagram Sockets (RDS) Numerous driver updates in close coordination with our hardware partners UEK R3 uses the same versioning model as the mainline Linux kernel version. Unlike in UEK R2 (which identifies itself as version "2.6.39", even though it is based on mainline Linux 3.0.x), "uname" returns the actual version number (3.8.13). For further details on the new features, changes and any known issues, please consult the Release Notes. The Unbreakable Enterprise Kernel Release 3 and related packages can be installed using the yum package management tool on Oracle Linux 6 Update 4 or newer, both from the Unbreakable Linux Network (ULN) and our public yum server. Please follow the installation instructions in the Release Notes for a detailed description of the steps involved. The kernel source tree will also available via the git source code revision control system from https://oss.oracle.com/git/?p=linux-uek3-3.8.git If you would like to discuss your experiences with Oracle Linux and UEK R3, we look forward to your feedback on our public Oracle Linux Forum.

  Read the article

• VMware Kernel Module Updater hangs on Ubuntu 13.04

  VMware Player has a nice auto-detection of kernel changes, and requests the user to compile the required modules in order to load them. This happens from time to time after a regular update of your system. Usually, the dialog of VMware Kernel Module Updater pops up, asks for root access authentication, and completes the compilation. VMware Player or Workstation checks if modules for the active kernel are available. In theory this is supposed to work flawlessly but in reality there are pitfalls occassionally. With the recent upgrade to Ubuntu 13.04 Raring Ringtail and the latest kernel 3.8.0-21 the actual VMware Kernel Module Updater simply disappeared and the application wouldn't start as expected. When you launch VMware Player as super user (root) the dialog would stall like so: VMware Kernel Module Updater stalls while stopping the services Prior to version 5.x of VMware Player or version 7.x of VMware Workstation you would run a command like: $ sudo vmware-config.pl to resolve the module version conflict but this doesn't work anyway. Solution Instead, you have to execute the following line in a terminal or console window: $ sudo vmware-modconfig --console --install-all Those switches are (as of writing this article) not documented in the output of the --help switch. But VMware already documented this procedure in their knowledge base: VMware Workstation stops functioning after updating the kernel on a Linux host (1002411). Update As of today I had the first kernel upgrade to version 3.8.0-22 in Ubuntu 13.04. Don't even try it without vmware-modconfig...

  Read the article

• Suspended Laptop Cannot Wake Up - Ubuntu

  - by Zack

  I've got an ASUS G73JH, and whenever I suspend it or hibernate it, it will not wake up. The screen stays backlight but is black. The fan remains running, however the HDD does not, not disk activity is noticeable (audibly (It's not a SSD)). I can't: Awaken it with the keyboard Awaken it with the mouse Soft power-off by pressing the power button Change virtual screens by pressing Ctrl-Alt-# Restart X by pressing Ctrl-Alt-Backspace I have to hold down the power button and shut it down that way, and this seems a little unreasonable. Is there a place I could look for more detail as to what's causing this? Is there a known quick-fix to this issue? Nothing is logged as happening when the system is in "suspend" mode. Here's what happened immediately before and after the suspend "happened," note the time gap: May 4 17:46:13 tofu NetworkManager: <info> (eth0): carrier now OFF (device state 1) May 4 17:48:57 tofu kernel: imklog 4.2.0, log source = /proc/kmsg started. This one's kinda long, here's what happened immediately before the suspend, I'm not sure if it'll help but if you can find a use for it: May 4 17:46:10 tofu anacron[3353]: Anacron 2.3 started on 2010-05-04 May 4 17:46:10 tofu anacron[3353]: Normal exit (0 jobs run) May 4 17:46:10 tofu kernel: [ 2241.775927] CPU0 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.775958] CPU1 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.775987] CPU2 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776138] CPU3 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776168] CPU4 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776197] CPU5 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776200] CPU6 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.776229] CPU7 attaching NULL sched-domain. May 4 17:46:10 tofu kernel: [ 2241.919611] CPU0 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.919668] domain 0: span 0,4 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.919699] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.919733] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.919762] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.919850] CPU1 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.919852] domain 0: span 1,5 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.919881] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.919912] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.919915] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920003] CPU2 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920005] domain 0: span 2,6 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920033] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920065] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920093] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920155] CPU3 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920157] domain 0: span 3,7 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920185] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920217] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920245] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920307] CPU4 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920335] domain 0: span 0,4 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920337] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920368] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920397] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920459] CPU5 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920487] domain 0: span 1,5 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920489] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920520] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920549] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920611] CPU6 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920639] domain 0: span 2,6 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920641] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920699] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920701] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) May 4 17:46:10 tofu kernel: [ 2241.920762] CPU7 attaching sched-domain: May 4 17:46:10 tofu kernel: [ 2241.920791] domain 0: span 3,7 level SIBLING May 4 17:46:10 tofu kernel: [ 2241.920793] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) May 4 17:46:10 tofu kernel: [ 2241.920851] domain 1: span 0-7 level MC May 4 17:46:10 tofu kernel: [ 2241.920853] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) May 4 17:46:12 tofu NetworkManager: <info> Sleeping... May 4 17:46:12 tofu NetworkManager: <info> (wlan0): now unmanaged May 4 17:46:12 tofu NetworkManager: <info> (wlan0): device state change: 8 -> 1 (reason 37) May 4 17:46:12 tofu NetworkManager: <info> (wlan0): deactivating device (reason: 37). May 4 17:46:12 tofu NetworkManager: <info> (wlan0): canceled DHCP transaction, dhcp client pid 1984 May 4 17:46:12 tofu kernel: [ 2244.084515] wlan0: deauthenticating from 68:7f:74:23:02:ae by local choice (reason=3) May 4 17:46:12 tofu avahi-daemon[1176]: Withdrawing address record for 192.168.1.2 on wlan0. May 4 17:46:12 tofu avahi-daemon[1176]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.2. May 4 17:46:12 tofu avahi-daemon[1176]: Interface wlan0.IPv4 no longer relevant for mDNS. May 4 17:46:12 tofu NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. May 4 17:46:12 tofu NetworkManager: <info> (wlan0): cleaning up... May 4 17:46:12 tofu NetworkManager: <info> (wlan0): taking down device. May 4 17:46:12 tofu avahi-daemon[1176]: Withdrawing address record for 2002:4c6e:638a:0:1e4b:d6ff:fe78:951d on wlan0. May 4 17:46:12 tofu wpa_supplicant[1212]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys May 4 17:46:13 tofu NetworkManager: <info> (eth0): now unmanaged May 4 17:46:13 tofu NetworkManager: <info> (eth0): device state change: 8 -> 1 (reason 37) May 4 17:46:13 tofu NetworkManager: <info> (eth0): deactivating device (reason: 37). May 4 17:46:13 tofu NetworkManager: <info> (eth0): canceled DHCP transaction, dhcp client pid 1559 May 4 17:46:13 tofu NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess#012 May 4 17:46:13 tofu avahi-daemon[1176]: Withdrawing address record for 192.168.1.3 on eth0. May 4 17:46:13 tofu avahi-daemon[1176]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.3. May 4 17:46:13 tofu avahi-daemon[1176]: Interface eth0.IPv4 no longer relevant for mDNS. May 4 17:46:13 tofu NetworkManager: <info> (eth0): cleaning up... May 4 17:46:13 tofu NetworkManager: <info> (eth0): taking down device. May 4 17:46:13 tofu avahi-daemon[1176]: Withdrawing address record for 2002:4c6e:638a:0:4a5b:39ff:fe0b:325d on eth0. May 4 17:46:13 tofu NetworkManager: <info> (eth0): carrier now OFF (device state 1)

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• Setting up Netbeans/Eclipse for Linux Kernel Development

  - by red.october

  Hi: I'm doing some Linux kernel development, and I'm trying to use Netbeans. Despite declared support for Make-based C projects, I cannot create a fully functional Netbeans project. This is despite compiling having Netbeans analyze a kernel binary that was compiled with full debugging information. Problems include: files are wrongly excluded: Some files are incorrectly greyed out in the project, which means Netbeans does not believe they should be included in the project, when in fact they are compiled into the kernel. The main problem is that Netbeans will miss any definitions that exist in these files, such as data structures and functions, but also miss macro definitions. cannot find definitions: Pretty self-explanatory - often times, Netbeans cannot find the definition of something. This is partly a result of the above problem. can't find header files: self-explanatory I'm wondering if anyone has had success with setting up Netbeans for Linux kernel development, and if so, what settings they used. Ultimately, I'm looking for Netbeans to be able to either parse the Makefile (preferred) or extract the debug information from the binary (less desirable, since this can significantly slow down compilation), and automatically determine which files are actually compiled and which macros are actually defined. Then, based on this, I would like to be able to find the definitions of any data structure, variable, function, etc. and have complete auto-completion. Let me preface this question with some points: I'm not interested in solutions involving Vim/Emacs. I know some people like them, but I'm not one of them. As the title suggest, I would be also happy to know how to set-up Eclipse to do what I need While I would prefer perfect coverage, something that only misses one in a million definitions is obviously fine SO's useful "Related Questions" feature has informed me that the following question is related: http://stackoverflow.com/questions/149321/what-ide-would-be-good-for-linux-kernel-driver-development. Upon reading it, the question is more of a comparison between IDE's, whereas I'm looking for how to set-up a particular IDE. Even so, the user Wade Mealing seems to have some expertise in working with Eclipse on this kind of development, so I would certainly appreciate his (and of course all of your) answers. Cheers

  Read the article

• System locking up with suspicious messages about hard disk

  - by Chris Conway

  My system has started behaving strangely, intermittently locking up. I see messages like the following in syslog: Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY } Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY } And then this: Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY } Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16) Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16) Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133 Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4 Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0 Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1) Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012) Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) There are no messages marked after 23:39. When I next tried to use the machine, it would not return from the screensaver (blank screen), nor switch to another terminal, and I had to hard reboot it. [UPDATE] The output of smartctl is here. I had trouble getting this, because / is being mounted read-only (?!), which prevents most applications from running. Also, it may not be related, but I have the following worrying messages in dmesg: [ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30] [ 10.098486] ACPI: This conflict may cause random problems and system instability [ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.112570] Linux agpgart interface v0.103 [ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 10.161506] it87: Found IT8712F chip at 0x290, revision 8 [ 10.161517] it87: VID is disabled (pins used for GPIO) [ 10.161527] it87: in3 is VCC (+5V) [ 10.161528] it87: in7 is VCCH (+5V Stand-By) [ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45] [ 10.161562] ACPI: This conflict may cause random problems and system instability [ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [UPDATE 2] I swapped in a new SATA cable, per Phil's suggestion. The current output of smartctl is here, if it helps. [UPDATE 3] I don't think the cable fixed it. The system hasn't locked up yet, but my media player crashed a few minutes ago and I have the following in the syslog: Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0) Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16) Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link I get the following response from smartctl: $ sudo smartctl -a /dev/sda [sudo] password for chris: sudo: Can't open /var/lib/sudo/chris/0: Read-only file system smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: /0:0:0:0 Version: scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

  Read the article

• Virtualbox on Ubuntu 12.04 and 3.5 kernel

  - by kas

  I have installed the 3.5 kernel under Ubuntu 12.04. When I install virtualbox I recieve the following error. Setting up virtualbox (4.1.12-dfsg-2ubuntu0.2) ... * Stopping VirtualBox kernel modules [ OK ] * Starting VirtualBox kernel modules * No suitable module for running kernel found [fail] invoke-rc.d: initscript virtualbox, action "restart" failed. Processing triggers for python-central ... Setting up virtualbox-dkms (4.1.12-dfsg-2ubuntu0.2) ... Loading new virtualbox-4.1.12 DKMS files... First Installation: checking all kernels... Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. * Stopping VirtualBox kernel modules [ OK ] * Starting VirtualBox kernel modules * No suitable module for running kernel found [fail] invoke-rc.d: initscript virtualbox, action "restart" failed. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Does anyone know how I might be able to resolve this? Edit -- Here is the make.log DKMS make.log for virtualbox-4.1.12 for kernel 3.5.0-18-generic (x86_64) Mon Nov 19 12:12:23 EST 2012 make: Entering directory `/usr/src/linux-headers-3.5.0-18-generic' LD /var/lib/dkms/virtualbox/4.1.12/build/built-in.o LD /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/built-in.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/linux/SUPDrv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/SUPDrv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/SUPDrvSem.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/alloc-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/initterm-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/memobj-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/mpnotification-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/powernotification-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/assert-r0drv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/alloc-r0drv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/initterm-r0drv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.o /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.c: In function ‘rtR0MemObjLinuxDoMmap’: /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.c:1150:9: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [/var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.o] Error 1 make[1]: *** [/var/lib/dkms/virtualbox/4.1.12/build/vboxdrv] Error 2 make: *** [_module_/var/lib/dkms/virtualbox/4.1.12/build] Error 2 make: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic'

  Read the article

• User to kernel mode big picture?

  - by fsdfa

  I've to implement a char device, a LKM. I know some basics about OS, but I feel I don't have the big picture. In a C programm, when I call a syscall what I think it happens is that the CPU is changed to ring0, then goes to the syscall vector and jumps to a kernel memmory space function that handle it. (I think that it does int 0x80 and in eax is the offset of the syscall vector, not sure). Then, I'm in the syscall itself, but I guess that for the kernel is the same process that was before, only that it is in kernel mode, I mean the current PCB is the process that called the syscall. So far... so good?, correct me if something is wrong. Others questions... how can I write/read in process memory?. If in the syscall handler I refer to address, say, 0xbfffffff. What it means that address? physical one? Some virtual kernel one?

  Read the article

• How can I remove old kernels/install new ones when /boot is full?

  - by Marcel

  I know this question is asked many times before, however with me it is just a bit different I guess. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 224G 5.2G 208G 3% / udev 1.9G 4.0K 1.9G 1% /dev tmpfs 777M 260K 777M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/sda2 90M 88M 0 100% /boot /dev/sda6 1.9G 514M 1.3G 29% /tmp My boot partition is full. Current Kernel: # uname -r 3.2.0-35-generic All Kernels: # dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-34-generic 3.2.0-34.53 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-35-generic 3.2.0-35.55 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-37-generic 3.2.0-37.58 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-38-generic 3.2.0-38.60 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iU linux-image-generic 3.2.0.37.45 Generic Linux kernel image So I thought of removing the 3.2.0.32-generic kernel with: # sudo apt-get purge linux-image-3.2.0-32-generic Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.37.45) but 3.2.0.38.46 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). No success. When I try apt-get -f install it also fails: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-34 linux-headers-3.2.0-35 linux-headers-3.2.0-34-generic linux-headers-3.2.0-35-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-generic linux-image-generic The following packages will be upgraded: linux-generic linux-image-generic 2 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 5 not fully installed or removed. Need to get 0 B/4,334 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.99ubuntu13.1) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-37-generic (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-38-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic /boot/vmlinuz-3.2.0-37-generic update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-37-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-38-generic (3.2.0-38.60) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-38-generic /boot/vmlinuz-3.2.0-38-generic update-initramfs: Generating /boot/initrd.img-3.2.0-38-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-38-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-38-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-38-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-37-generic; however: Package linux-image-3.2.0-37-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Package linux-image-generic is not configured yet. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already update-initramfs: Generating /boot/initrd.img-3.2.0-35-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-35-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-37-generic linux-image-3.2.0-38-generic linux-image-generic linux-generic initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) Any help would really be appreciated. Update: I did: sudo rm /boot/*-3.2.0-32-generic /boot/*-3.2.0-34-generic After that the following problem with apt-get -f install: root@localhost:/# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-generic The following packages will be upgraded: linux-generic 1 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,722 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Version of linux-image-generic on system is 3.2.0.38.46. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• FreeBSD 8 Kernel Configuration Error Using the VESA Option

  - by gvkv

  I'm trying to reconfigure FreeBSD 8 (amd64) to allow for a high resolution terminal by following these instructions. The problem is that when I add the two lines: options VESA options SC_PIXEL_MODE and try to build: make buildkernel KERNCONF=VESAKERN I get the following error: /usr/src/sys/amd64/conf/VESAKERN: unknown option "VESA" and I have no idea why.

  Read the article

• Linux Kernel Messages: ata1.00: status: { DRDY ERR }

  - by PM

  I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

  Read the article

• Kernel Panic - Not Syncing: Fatal exception

  - by user3513346

  Server (HP Proliant D320e G8 v2) froze at this screen during boot today (running CentOS 6.5): I was able to get the server to boot after a 'press and hold'. I've been having many problems with the server lately - mainly related to the iLO and being unable to install CentOS 7. Could someone please help me decode this screen? Does it suggest there could be a serious problem? Or does this just happen sometimes? It is possible that the OS wasn't 'shutdown' properly before the failed boot.

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• What is a kernel panic?

  - by RCIX

  I know that this sounds like a LMGTFY question but i thought i'd ask it so that google actually turns up (more) good results. What is it?

  Read the article

• Kernel config file generator

  - by lisak

  Hey guys, could please anybody recommend some kind of kconfig generator that would trim modules and built-in stuff that is not needed according to current hardware ? The best I have found is this : http://lkml.org/lkml/2008/9/16/290 I don't care about compilation time and the amount of modules that are not built-in. I'm concerned about performance. I don't know how much memory and runtime is wasted on huge kernels with almost everything possible. I'm a java developer and I don't know what most of the modules and drivers are for. So there is not much I can disable and be sure that I don't screw it up. Thanks in advance

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• Magic key in Linux Kernel

  - by Masi

  What is the purpose of the following command? sudo echo t > /proc/sysrq-trigger I run it, but I can see no difference in the magic key and its output at dmesg. Trigger suggests me that the databases of sysrq are involved in the process.

  Read the article

• Kernel Compiling from Vanilla to several machines

  - by Linux Pwns Mac

  When compiling kernels for machines is there a safe or correct way to create a template for say servers? I work with a lot of RHEL servers and want to compile them with GRSEC. However, I do not wish to always rebuild off of the .config for each machine and go in and remove a bunch of unrelated modules like wireless, bluetooth, ect... which you typically do not need in servers. I want to create a template .config that can be used on any machine, but is there a safe way to do that when hardware changes? I know with Linux, at least from my experience, you can cross jump hardware way easier then Windows/OSX. I assume that as long as I leave MOST of all the main hardware modules/CPU in that this could create a .config that would work for all or just about any machine?

  Read the article

• How to check linux kernel version number?

  - by apache

  Is there such a command out there?

  Read the article

• Update linux kernel image, How can I do it in safe? (how to revert)?

  - by Kit Ho

  based on this post , i am trying to update my kernel from 2.6.32 to 2.6.35 as my intel video card doesn't work. However, I am very afraid that my update would cause my computer crash and lost all the thing.(does not function , esp for video) I am using ubuntu 10.04, currently version is 2.6.32-40-generic. Does anyone try to update to 2.6.35-32??? If in case it make crash? how can i revert back to 2.6.32??? Thanks Kit

  Read the article

• Maximum Possible File Name Length in Windows Kernel

  - by Lambert

  I was wondering, what is the longest possible name length allowed by the Windows kernel? E.g.: I know the kernel uses UNICODE_STRING structures to hold all object paths, and since the byte length of a wide-character string is stored inside a USHORT, that allows for a maximum path length of 2^15 - 1 characters. Is there a similar, hard restriction on a file name (rather than path)? (I don't care if NTFS or FAT32 imposes a particular restriction; I'm looking for the longest possible theoretically allowed name in the kernel, assuming no additional file system or shell restrictions.) (Edit: For those wondering why this even matters, consider that normally, traversing a directory is achieved by FindFirstFile/FindNextFile calls, one call per file. Given the function named NtQueryDirectoryFile, which is the underlying system call and which returns multiple file names per call, it's actually possible to take advantage of this maximum-length restriction on the path to make an extremely-fast directory traverser that uses solely the stack as a buffer. Now I'm trying to extend that concept, and I need to know the maximum size of a file name.)

  Read the article

• 2.6.9 Kernel on virtual server (non upgradable) - any expected problems?

  - by chris_l

  Hi, I'm considering to rent a virtual server (for me personally). The product I'm currently looking at offers IMO fair pricing, very good hardware etc. The only problem is, that I won't be able to do an upgrade to a newer kernel than 2.6.9 (running Debian Etch). Also, I can't install my own kernel modules. (The server runs with Virtuozzo, so as far as I understand it, it just does some chroot instead of a real virtualization (?)) I want to run GlassFish, Postgres, Subversion, Trac and maybe some other things on it. It will also have to employ a firewall, and provide OpenSSL for https. Ideally, it would also be able to do AIO (asynchronous IO), which could speed up some server I/O. Should I expect problems with that old kernel version, in conjunction with the software I want to install (I'd like to use current versions of the software)? One thing I already found out, is that you can't do everything with iptables, since some kernel modules are missing/things are not build into the kernel. GlassFish v3 appears to run fine at first glance. I was able to test the server for a few hours. Installing my whole setup wasn't feasible in that time, but what I can say is, that it's amazingly fast for an entry-level vserver, especially hard disk and network performance (averaging at ca. 400MBit/s). So if the kernel won't be a problem, I'd really like to take it. Thanks, Chris PS Exact kernel version: 2.6.9-023stab051.3-smp

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >