ben karel - Page 16 - Developer IT

New 3TB HDD, can see full 2.7TB in Linux and Windows, but shows up as 801.6GB in BIOS

- by Ben Lee

I recently purchased a Seagate Barracuda 3TB drive (ST3000DM001). After installing it, my BIOS recognized it but reported the size as 801.6gb. I went ahead and booted into Linux anyway (Ubuntu 11.10 64-bit). Linux saw it as a 2.7TB. Following some online instructions (don't have the link handy, unfortunately), it looks liked converting this drive to GPT was recommended. So I used gparted to do that, then formatted it to NTFS also using gparted. (I'm using NTFS because my machine is daul-boot and I want to have access to the drive in Windows too). I rebooted to Windows (Windows 7 64-bit), and Windows also sees the drive with 2.7TB free. Everything seems to be working fine. The only issue is that my BIOS is still reporting the drive as 801.6GB. My motherboard is an ASRock 770 Extreme3 and BIOS is the latest version. Since everything seems to be working with the new drive anyway, I'm hoping that the fact that the BIOS is reporting the wrong size is not an actual problem. But honestly, I don't really know. Anyone out there more familiar with this know if this could potentially cause any problems in the future? Any way to get the BIOS to report the correct size?

Read the article

Migrating Email to new hosting.

- by Ben C

I've made a site for a charity, and now have to move hosting for them. They have 5 or so email addresses on their current hosting account, which will of course need to move too. What's the best way to migrate their email addresses to the new server without too much hassle for them? They use POP3, so should I just create the account on the new server and then get them to update their settings? That won't remove their old emails from Outlook Express, will it?

Read the article

TicTac Photo and Windows 7

- by Ben

Hello, My wife has been creating a tictac photo album. I had to upgrade to windows 7 as i had enough of Vista so i backed up the tic tac photo file and the photos to an external hard disk and performed a fresh install of win7. Now here is the problem. TicTacPhoto says it can find the photos in the album. The locations were as follows: Vista: C:\Users\Kelly\Pictures Win 7 C:\Users\Kelly\My Pictures When i try to create a Pictures folder under Kelly it popups a message about merging the two folders and simply moves the pictures to the My Pictures folder. Does anyone know a way to make a foler called pictures so i can eliminate the file path problem and then try again with tic tac photo support to get them to fix my file. My wife is going to kill me as its our wedding album and she has spent upwards of 30hrs designing it and me upgrading to win 7 means its all my fault. She does not understand file paths etc. Im going to try and open the album file in a text editor and see if i can see anything but thought i would ask here as well. Any help appreciated.

Read the article

Diagnosing laptop charging issues

- by Ben

My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

Read the article

Task Sequence boots to logon screen instead of task sequence mode

- by Ben M.

I'm running a task sequence, and so that users don't accidentally interfere, I have the task sequence reboot to currently installed operating system, which as I understand, is supposed to boot to a sort of single user mode and all that shows is task sequence progress. However, this does not happen, it boots up like normal and comes to the logon screen and the task sequence runs in background. How can I adjust this behavior to the desired result?

Read the article

MacBookPro running Windows 7: accidental trackpad input is driving me mad

- by Ben Hammond

I am running Windows7 Professional 64bit on a 2010 MacBookPro using BootCamp 3.1. I am using an external trackball. When I am typing, I accidently brushing the trackpad and accidently overtyping randomly selected pieces of text. Which is driving me mad. I have tried to install TrackPad++, but I could not get the Trackpad++ control panel to recognise that the driver software was installed. I tried TrackPad Magic, but although it gives me a system tray icon telling me it is working, but it does not appear to disable the track pad. A quick Google implies that there should be an option in the BootCamp Control Panel 'Ignore accidental Input while typing'. But I can't see one of those in my BootCamp Control Panel. Am I looking in the wrong place? Is this feature 32bit only? Is there anything else I should try?

Read the article

High load average, low CPU and IO (Centos 5.7)

- by Ben

A Drupal 7 site with CiviCRM, after running smoothly for a year on a 1&1 VPS suddenly became unresponsive. Now pages eventually load, but can take more than a minute. Looking at resource use in Virtuozzo, the load average carries a warning, and has remained above 1. While I understand this isn't particularly high, this is a change from when the site was working. Here is a typical snapshot of top: top - 03:10:32 up 3:21, 1 user, load average: 1.16, 1.22, 1.30 Tasks: 43 total, 1 running, 42 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.1%sy, 0.1%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097152k total, 1015112k used, 1082040k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached CPU idle level never seems to go much below 70%. wa is virtually always at 0. There appears to be lots of free memory. And here is some vmstat output, again showign wa at 0, plenty of free memory, and an idle CPU: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 1100872 0 0 0 0 2783 23672 0 538 1 0 99 0 0 1 0 0 1100872 0 0 0 0 0 16 0 101754 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 17 0 103133 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 102080 0 0 100 0 0 1 0 0 1100872 0 0 0 0 0 6 0 99881 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 105187 0 0 100 0 0 I've spoken to 1&1 but they don't have any ideas as to what could be causing the high load average. Instead they suggested an upgrade :) I've looked for processes that might be causing this, examined MySQL showprocesslist, and restarted the container with no result. Does anyone have more troubleshooting suggestions or insights?

Read the article

Any ideas out there as to how the data can be recovered from an SSD?

- by ben

A friend had some form of catastrophic failure on an HP mini 1000, unbootable. Of course there was data that wasn't backed up. I've removed the SSD and hooked it up to a ZIF 40 enclosure but can not seem to get the drive to be recognized in Windows 7. In Disk Management it displays as present, but uninitialized. Attempting to initialize it presents an error Virtual Disk Manager - "The device is not ready". There is scant information on MIE (the custom OS), so I'm not even sure what kind of file system I'm dealing with. In any case, if the filesystem is indeed some flavor other than FAT or NTFS, is this error consistent with that? Are there any creative ideas out there as to how the data can be recovered? Update: Thanks for all the suggestions! I hadn't even considered running a live cd. Unfortunately no luck with Ubuntu (live cd) or explore2fs. The zif connection seems ok (color coded green led for proper connect, orange for not). The drive can't be initialized and therefore can't be formatted, so I guess there may be some real damage. Probably needs to head to a specialist. Thanks again for the feedback, much appreciated.

Read the article

How can Bonjour be setup to function over a VPN connection using Mac OS X — Mountain Lion Server?

- by Ben Coppock

I purchased Mountain Lion Server for our office thinking that Bonjour would automatically enable any computers connected via VPN to see all computers and applications (such as Bento) running on the office network. The hope was that those of us working at home would feel just like we were in the office, with all network services working transparently over the VPN connection. However, I see that Bonjour (aka mDNS) is not enabled to work over the VPN by default. Can I configure Mountain Lion Server to automatically pass Bonjour traffic over the VPN? Is there any reason not to do this?

Read the article

Windows somehow got convinced that a file is a folder. How do I change it back?

- by Ben Collins

I recently moved an external drive from my usb-enabled router to my desktop machine, and ran into some permissions-related issues. A number of files were giving me errors when I tried to take ownership or set permissions, and in all my fiddling on a particular file, it somehow got switched to a folder. Anyone have any idea how this might have happened, and how to flip it back? Here's a screenshot:

Read the article

Do i need a dedicated server for load balancing?

- by Ben

I'm completely new to the concept of load balancing so i hope this question isn't a "stupid question" because i've been searching around and im having a hard time understanding this. So to my understanding, in order to load balance, i need a separate machine with an ip address i can direct all traffic to. I initially thought i needed to rent 3 dedicated servers, one for load balancing and the other two as backend servers. Would a dedicated server be too much for a load balancer or do hosting companies have special types of computers for that process? Then i read somewhere else that i can install a load balance software in both of the two servers and configure it in a way that doesn't require me to rent another machine/dedicated server for load balancing. So im a bit confuse on how to actually implement a load balancer and whether or not i need a dedicated server for the sole purpose of acting as a load balancing machine. Also, i was recommended to use HAproxy so i'll be heading that direction for load balancing.

Read the article

Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

- by Ben

I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

Read the article

Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

- by Ben Campbell

Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

Read the article

After Switching from Apache to Nginx, HTML Truncated

- by Ben Buras

Our site was running fine with Apache, but I am switching us over to Nginx (with php-fastcgi) to be more scalable. Everything is working fine except our HTML gets truncated sometimes (usually on large pages). Live server running Apache: http://bros4bros.com/index.php?action=browse_members&members_page=50 (WARNING: half naked guys!) New server running Nginx: http://50.56.238.208/index.php?action=browse_members&members_page=50 I have tried modifying these settings with no avail: max_execution_time fastcgi_send_timeout

Read the article

Ubuntu only boots with USB plugged in

- by Ben

Read the article

Postfix send remotely for X account

- by Ben Scobie

I setup Postfix a few days ago to deliver email bound for my host name remotely instead of locally as I want email sent to my remote [email protected] account without trying to be sent locally. However, this causes a problem as it tries to send local bound mail(root) to my remote server as well ([email protected]). I would like E-mail bound for [email protected] to be sent to the remote server(GMail Apps in this case) and everything else sent locally(using the alias file perhaps), is this possible? My current configuration: http://pastebin.com/htwSQB61

Read the article

Need to increase nginx throughput to an upstream unix socket -- linux kernel tuning?

- by Ben Lee

I am running an nginx server that acts as a proxy to an upstream unix socket, like this: upstream app_server { server unix:/tmp/app.sock fail_timeout=0; } server { listen ###.###.###.###; server_name whatever.server; root /web/root; try_files $uri @app; location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } Some app server processes, in turn, pull requests off /tmp/app.sock as they become available. The particular app server in use here is Unicorn, but I don't think that's relevant to this question. The issue is, it just seems that past a certain amount of load, nginx can't get requests through the socket at a fast enough rate. It doesn't matter how many app server processes I set up, it doesn't even matter what the app is (tried it with a dummy app with just a single endpoint that returned an empty page with status 404). The bottleneck seems to be the socket, not the app. I'm getting a flood of these messages in the nginx error log: connect() to unix:/tmp/app.sock failed (11: Resource temporarily unavailable) while connecting to upstream Many requests result in status code 502, and those that don't take a long time to complete. The nginx write queue stat hovers around 1000. Anyway, I feel like I'm missing something obvious here, because this particular configuration of nginx and app server is pretty common, especially with Unicorn (it's the recommended method in fact). Are there any linux kernel options that needs to be set, or something in nginx? Any ideas about how to increase the throughput to the upstream socket? Something that I'm clearly doing wrong? Additional information on the environment: $ uname -a Linux app1 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ ruby -v ruby 1.9.3p194 (2012-04-20 revision 35410) [x86_64-linux] $ unicorn -v unicorn v4.3.1 $ nginx -V nginx version: nginx/1.2.1 built by gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) TLS SNI support enabled Current kernel tweaks: net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.ipv4.tcp_mem = 16777216 16777216 16777216 net.ipv4.tcp_window_scaling = 1 net.ipv4.route.flush = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 net.core.somaxconn = 8192 net.netfilter.nf_conntrack_max = 131072

Read the article

Is there a reason to use library backups if I'm backup up full disks?

- by Ben Brocka

In Windows Backup I can backup libraries or whole drives (or specific folders). I want a complete backup of all relevant drives. After selecting the drives, there's still the option to backup libraries: Is the backup going to do anything different if I include libraries as well as drives? Should I just backup the whole drive instead? Space used by the backup shouldn't be an issue, since I know the incremental backup is pretty smart..

Read the article

Windows 8 Task Manager without elevating?

- by Ben Voigt

In Windows Vista and Windows 7, the task manager ran non-elevated, and you didn't face a UAC prompt unless you chose "View Processes of All Users". In Windows 8 Preview, out of the box the Task Manager starts elevated every time. How can I configure it to start non-elevated so I don't get hit with a UAC prompt every time I check CPU usage or view the list of running processes to see if an application closed completely? (I am not looking for answers which involve weakening UAC, and I ask the community's help in downvoting any such suggestions.)

Read the article

Can't install Windows Desktop Search 4.0

- by Ben Baril

On a windows XP system, I try to download and install Windows Desktop Search 4.0 and it fails. The error I get: Windows Search 4.0 could not be installed on this system. For more details, check the log file. (C:\Windows\KB940157.log) The contents of that file: http://pastebin.com/MW37NXCy No idea how to resolve this. Any help is extremely appreciated!

Read the article

MacPorts, Fink, etc.

- by Ben Alpert

On my Mac OS X (10.5, soon to be 10.6) machine, how would you recommend I install various software that's been ported from Linux? I don't install such software very frequently, but I've been using MacPorts and it always seems quite slow, presumably because it has to compile the packages on-the-fly. I'd much prefer a package management system that has binary packages, saving me the need to compile things every time I want to download something new. I think Fink has binaries for some of the packages, but I usually see MacPorts recommended as the system to use. Which do you think works better and why? (Or is there another system that I haven't heard of?)

Read the article

What does the "Enable Advanced Printing Features" option do?

- by Ben McCormack

When I go to look at a printer's properties in Windows XP, I see a checkbox for "Enable Advanced Printing Features." What does this option do? (Specifically, I'm using a Zebra S4M label printer, but I believe this option is available for printers throuh the "printer properties" dialog in Windows).

Read the article

Logitech webcam device only recognised by one software, without drivers

- by Ben Franchuk

A couple weeks ago I purchased a Logitech webcam at a garage sale; It did not come with any driver DVDs or anything like that. I plugged it in, turned on my computer, and continued work as usual. I did not at the time (and still have not) gotten any drivers for the device. Recently, though, I started up an audio software named as Cubase, only to find that it was picking up audio reads off of... something. I checked my sound card, and everything else plugged into my computer, but couldn't find where in the world this audio was being picked up from. There were no microphones listed in the device managers, and no "unknown devices" or whatever. Everything seemed as it always was. Running out of ideas, i blew an air-horn directly into the general area of the webcam, located directly in front of me. Sure enough, the audio peaked, indicating that the microphone was definitely in the webcam and that Cubase was somehow picking up this audio, even without drivers. The software lists the device as a "Universal USB Microphone". Adobe Audition, Soundbooth, and other audio applications cannot find the device either. Why is it that this one software (Cubase) can use this device without a driver, while every other piece of software on the computer can't? Not even the operating system can recognize it. Windows 7 Professional x64 bit

Read the article

Remove Applications page on MDT 2012 Deployment Summary

- by Ben M.

I am using SCCM 2012 and MDT 2012 for OSD and app deployment. Because of the nature of how some of the apps need to be detected (and which changes as apps get updated) they show up with a warning sign on the Applications tab of the Deployment Summary. There is pretty much no way to get them all green check marked (not realistically in our setup anyway) so I would like to get rid of that page so that I don't have to hear about it from my teams as they deploy. Any help would be appreciated. MDT Summary screen: Applications Installed (the tab I want to remove)

Read the article

snort analysis of wireshark capture

- by Ben Voigt

I'm trying to identify trouble users on our network. ntop identifies high traffic and high connection users, but malware doesn't always need high bandwidth to really mess things up. So I am trying to do offline analysis with snort (don't want to burden the router with inline analysis of 20 Mbps traffic). Apparently snort provides a -r option for this purpose, but I can't get the analysis to run. The analysis system is gentoo, amd64, in case that makes any difference. I've already used oinkmaster to download the latest IDS signatures. But when I try to run snort, I keep getting the following error: % snort -V ,,_ -*> Snort! <*- o" )~ Version 2.9.0.3 IPv6 GRE (Build 98) x86_64-linux '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 1998-2010 Sourcefire, Inc., et al. Using libpcap version 1.1.1 Using PCRE version: 8.11 2010-12-10 Using ZLIB version: 1.2.5 %> snort -v -r jan21-for-snort.cap -c /etc/snort/snort.conf -l ~/snortlog/ (snip) 273 out of 1024 flowbits in use. [ Port Based Pattern Matching Memory ] +- [ Aho-Corasick Summary ] ------------------------------------- | Storage Format : Full-Q | Finite Automaton : DFA | Alphabet Size : 256 Chars | Sizeof State : Variable (1,2,4 bytes) | Instances : 314 | 1 byte states : 304 | 2 byte states : 10 | 4 byte states : 0 | Characters : 69371 | States : 58631 | Transitions : 3471623 | State Density : 23.1% | Patterns : 3020 | Match States : 2934 | Memory (MB) : 29.66 | Patterns : 0.36 | Match Lists : 0.77 | DFA | 1 byte states : 1.37 | 2 byte states : 26.59 | 4 byte states : 0.00 +---------------------------------------------------------------- [ Number of patterns truncated to 20 bytes: 563 ] ERROR: Can't find pcap DAQ! Fatal Error, Quitting.. net-libs/daq is installed, but I don't even want to capture traffic, I just want to process the capture file. What configuration options should I be setting/unsetting in order to do offline analysis instead of real-time capture?

Search Results

Search found 1524 results on 61 pages for 'ben karel'.

Page 16/61 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23 | Next Page >

- by Ben Lee

- by Ben C

- by Ben

- by Ben

- by Ben M.

- by Ben Hammond

- by Ben

- by ben

- by Ben Coppock

- by Ben Collins

- by Ben

- by Ben

- by Ben Campbell

- by Ben Buras

- by Ben

- by Ben Scobie

- by Ben Lee

- by Ben Brocka

- by Ben Voigt

- by Ben Baril

- by Ben Alpert

- by Ben McCormack

- by Ben Franchuk

- by Ben M.

- by Ben Voigt

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23 | Next Page >