Search Results

Search found 1219 results on 49 pages for 'bill miller'.

Page 16/49 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • DNSCurve vs DNSSEC

    - by Bill Gray
    Can someone informed, please give a lengthy reply about the differences and advantages/disadvantages of both approaches? I am not a DNS expert, not a programmer. I have a decent basic understanding of DNS, and enough knowledge to understand how things like the kaminsky bug work. From what I understand, DNSCurve has stronger encryption, is far simpler to setup, and an altogether better solution. DNSSEC is needlessly complicated and uses breakable encryption, however it provides end to end security, something DNSCurve does not. However, many of the articles I have read have seemed to indicate that end to end security is of little use or makes no difference. So which is true? Which is the better solution, or what are the disadvantages/advantages of each? edit: I would appreciate if someone could explain what is gained by encrypting the message contents, when the goal is authentication rather than confidentiality. The proof that keys are 1024bit RSA keys is here.

    Read the article

  • Cisco PIX 8.0.4, static address mapping not working?

    - by Bill
    upgrading a working Pix running 5.3.1 to 8.0.4. The memory/IOS upgrade went fine, but the 8.0.4 configuration is not quite working 100%. The 5.3.1 config on which it was based is working fine. Basically, I have three networks (inside, outside, dmz) with some addresses on the dmz statically mapped to outside addresses. The problem seems to be that those addresses can't send or receive traffic from the outside (Internet.) Stuff on the DMZ that does not have a static mapping seems to work fine. So, basically: Inside - outside: works Inside - DMZ: works DMZ - inside: works, where the rules allow it DMZ (non-static) - outside: works But: DMZ (static) - outside: fails Outside - DMZ: fails (So, say, udp 1194 traffic to .102, http to .104) I suspect there's something I'm missing with the nat/global section of the config, but can't for the life of me figure out what. Help, anyone? The complete configuration is below. Thanks for any thoughts! ! PIX Version 8.0(4) ! hostname firewall domain-name asasdkpaskdspakdpoak.com enable password xxxxxxxx encrypted passwd xxxxxxxx encrypted names ! interface Ethernet0 nameif outside security-level 0 ip address XX.XX.XX.100 255.255.255.224 ! interface Ethernet1 nameif inside security-level 100 ip address 192.168.68.1 255.255.255.0 ! interface Ethernet2 nameif dmz security-level 10 ip address 192.168.69.1 255.255.255.0 ! boot system flash:/image.bin ftp mode passive dns server-group DefaultDNS domain-name asasdkpaskdspakdpoak.com access-list acl_out extended permit udp any host XX.XX.XX.102 eq 1194 access-list acl_out extended permit tcp any host XX.XX.XX.104 eq www access-list acl_dmz extended permit tcp host 192.168.69.10 host 192.168.68.17 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq ssh access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 192.168.68.0 255.255.255.0 eq 5901 access-list acl_dmz extended permit udp host 192.168.69.103 any eq ntp access-list acl_dmz extended permit udp host 192.168.69.103 any eq domain access-list acl_dmz extended permit tcp host 192.168.69.103 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.100 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.101 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.101 eq 3306 access-list acl_dmz extended permit tcp host 192.168.69.104 host 192.168.68.102 eq 3306 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8080 access-list acl_dmz extended permit tcp 10.71.83.0 255.255.255.0 host 192.168.69.104 eq 8099 access-list acl_dmz extended permit tcp host 192.168.69.105 any eq www access-list acl_dmz extended permit tcp host 192.168.69.103 any eq smtp access-list acl_dmz extended permit tcp host 192.168.69.105 host 192.168.68.103 eq ssh access-list acl_dmz extended permit tcp host 192.168.69.104 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq www access-list acl_dmz extended permit tcp host 192.168.69.100 any eq https pager lines 24 mtu outside 1500 mtu inside 1500 mtu dmz 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 static (dmz,outside) XX.XX.XX.103 192.168.69.11 netmask 255.255.255.255 static (inside,dmz) 192.168.68.17 192.168.68.17 netmask 255.255.255.255 static (inside,dmz) 192.168.68.100 192.168.68.100 netmask 255.255.255.255 static (inside,dmz) 192.168.68.101 192.168.68.101 netmask 255.255.255.255 static (inside,dmz) 192.168.68.102 192.168.68.102 netmask 255.255.255.255 static (inside,dmz) 192.168.68.103 192.168.68.103 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.104 192.168.69.100 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.105 192.168.69.105 netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.102 192.168.69.10 netmask 255.255.255.255 access-group acl_out in interface outside access-group acl_dmz in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.97 1 route dmz 10.71.83.0 255.255.255.0 192.168.69.10 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 192.168.68.17 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global prompt hostname context Cryptochecksum:2d1bb2dee2d7a3e45db63a489102d7de

    Read the article

  • Silverlight Cream for March 13, 2010 -- #813

    - by Dave Campbell
    In this Issue: András Velvárt, Bobby Diaz, John Papa/Laurent Bugnion, Jesse Liberty, Christopher Bennage, Tim Greenfield, and Cameron Albert. Shoutouts: Svetla Stoycheva of SilverlightShow has an Interview with SilverlightShow Eco Contest Grand Prize Winner Daniel James Svetla Stoycheva of SilverlightShow also has an Interview with SilverlightShow Eco Contest Community Vote Winner Cigdem Patlak File this under #DoesHeEverSleep, Nokola has an EasyPainter Source Pack 1 Refresh And another filing in the same category by Nokola: EasyPainter Source Pack 2: Flickr, ComboCheckBox and more! In my last pre-#MIX10 'Cream post: From SilverlightCream.com: A Designer-friendly Approach to MVVM András Velvárt has an MVVM tutorial up on SilverlightShow from the Designer perspective of wiring up the View and ViewModel... good stuff my friend! Generate Strongly Typed Observable Events for the Reactive Extensions for .NET (Rx) In an effort to get more familiar with Rx, Bobby Diaz built a WhiteBoard app... there's a demo page plus the source... thanks Bobby! Silverlight TV 13: MVVM Light Toolkit My friend Laurent Bugnion is probably in the air flying to MIX10 right now, but at the MVP Summit last month, he recorded with John Papa and they produced an episode of Silverlight TV for Laurent's MVVM Light ... good stuff guys... see you tomorrow :) WCF Ria Services For Real Jesse Liberty has a great tutorial up on what it takes to get real data into your app ... you know... the stuff you have to get after reading a blog post that uses local stuff :) 1 Simple Step for Commanding in Silverlight Christopher Bennage is discussing Commanding and of course is using Caliburn for the example :) Use Silverlight Reactive Extensions (Rx) to build responsive UIs Tim Greenfield is beginning a two-parter on using Rx. In this first he has a comparison of with and without Rx... cool idea. General Purpose Sprite Class On the heels of Bill Reiss' Sprite posts, Cameron Albert has a General Purpose Sprite class post up using Bill's SilverSprite. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    MIX10

    Read the article

  • OpenVPN and TomatoVPN

    - by Bill Johnson
    Wondering if someone can help me with the following. I have updated my Linksys router with TomatoVPN and used the following config: Interface Type:TAP Protocol:UDP Port:1195 Firewall Custom Authorization Mode:Static Key I have then inserted the static key generated in OpenVPN saved and started the service. connect.ovpn. # Use the following to have your client computer send all traffic through your router # (remote gateway) remote (entered my DNS/DHCP servers external IP address here) port 1195 dev tap secret static.key.txt proto udp comp-lzo route-gateway 192.168.1.1 redirect-gateway float I've then placed my static key in a file in the same directory as your connect.ovpn (static.key.txt) Now OpenVPN is installed on a laptop that I use at home. I have plugged in the laptop to my home connection and started connect.ovpn The Local Area Connection is connected as 'Home Network 3' - and when I start OpenVPN it is connected as 'Local Area Connection 2' and this is showing as 'Unidentified Network' and it appears there is no network access. TAP-Win32 Adapter V9 appears to be the adaptors name and the IP and DNS properties are set to automatic. If I open up the OpenVPN GUI it shows an error message saying "Connecting to connect has failed". Looking at the error message behind this pop-up one line says "TCP/UDP Socket bind failed on local address [undef]:1195 Address already in use [WSAEADDRINUSE] Could anyone possibly help me further with this please?

    Read the article

  • Looking Back at MIX10

    - by WeigeltRo
    It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

    Read the article

  • configuring two network interfaces in ubuntu 10.04.1

    - by Bill Smith
    I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

    Read the article

  • Vista ICS issue

    - by Bill Grey
    I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

    Read the article

  • Variable parsing with Bash and wget

    - by Bill Westrup
    I'm attempting to use wget in a simple bash script to grab a jpeg image from an Axis camera. This script outputs a file named JPEGOUT, instead of the desired output, which should be a timestamp jpeg (ex: 201209292040.jpg) . Changing the variable in the wget statement from JPEGOUT to $JPEGOUT makes wget fail with "wget: missing URL" error. The weird thing is wget parses the $IP vairable correctly. No luck on the output file name. I've tried single quotes, double quotes, parenthesis: all to no luck. Here's the script !/bin/bash IP=$1 JPEGOUT= date +%Y%m%d%H%M.jpg wget -O JPEGOUT http://$IP/axis-cgi/jpg/image.cgi?resolution=640x480&compression=25 Any ideas on how to get the output file name to parse correctly?

    Read the article

  • New Demos SOA Suite (11.1.1.6) & SOA Suite Foundation Pack (11.1.1.6)

    - by JuergenKress
    For access to the Oracle demo systems please visit OPN and talk to your Partner Expert GSE: SOA & FP (11.1.1.6) Platforms Portable Version – Available SOA 11g Platform FP 11g Platform All SOA/BPM 11g Solutions OFM Demos Corner GSE Offerings Scheduling Demos on GSE Support GSE is pleased to announce the availability of SOA and Foundation Pack 11g (11.1.1.6) Platform Portable images. Portable images now come as a VBox appliance. SOA 11.1.1.6 Platform Portable Version This portable image comes with latest SOA Suite products installed and configured. Vbox appliance facilitates easy maintenance of the image. Click here to download the portable image. FP 11.1.1.6 Platform Portable Version Foundation Pack installed and configured on SOA image and stands as a base for building cross-application integrations. Click here to download the portable image. In addition to Portable images, Global Sales Engineering would like to inform availability of Hosted version of SOA & BPM 11g (11.1.1.6) Solutions. Click here for more information. SOA Suite Foundation Pack Demo Demo Overview Business Process Artifacts Demo Architecture Bill of Materials Demo Collateral DSS Offerings OFM Demos Corner Scheduling Demos on DSS DSS Support The Foundation Pack(FP) demo showcases various tools and utilities of Foundation Pack like Project Lifecycle Workbench(PLW) JDeveloper - Service Constructor Harvesting services to PLW/ Oracle Enterprise Repository Generation of Bill of Materials (BOM) Creation of Deployment Plans / Harvestor Settings Track Foundation Pack Fusion Order demo flow in Enterprise Manager Console For more information on the demo click here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA DEmo System,DSS,SOA,sales,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • robocopy transfer file and not folder

    - by Bill McKay
    I'm trying to use robocopy to tranfer a single file from one location to another but robocopy seems to think I'm always specifying a folder. Here is an example: robocopy "c:\transfer_this.txt" "z:\transferred.txt" But I get this error instead: 2009/08/11 15:21:57 ERROR 123 (0x0000007B) Accessing Source Directory c:\transfer_this.txt\ (note the '\' at the end of transfer_this.txt) But if I treat it like an entire folder: robocopy "c:\folder" "z:\folder" It works but then I have to transfer everything in the folder. How can I only transfer a single file with robocopy?

    Read the article

  • How to fix network connection dead on startup, but okay after disable/enable?

    - by bill weaver
    on Startup When my system starts up, the internet connection is dead. This causes various problems with startup items such as updates and auto-start programs failing. However, the connection is fine after going into Network and Sharing, Change adapter settings, then disabling and re-enabling the adapter. Any suggestions on why this is happening and how to fix it? System summary: Windows 7, 64 bit, Realtek PCIe GBE Family Controller, Linksys WRT610N router, Sci Atlanta cable modem.

    Read the article

  • How to fix: faulting application w3wp.exe?

    - by Bill Paetzke
    In the Event Viewer: Source: Application Error Category: 100 Event ID: 1000 Faulting application w3wp.exe, version 6.0.3790.3959, faulting module kernel32.dll, version 5.2.3790.4480, fault address 0x000000000000dd50. This error is happening on my background-app server (not web server). It's happening every 3-5 minutes. What's the problem in laymen's terms? And then the solution? :) Or if this isn't enough info, how can I troubleshoot?

    Read the article

  • Iterative Conversion

    - by stuart ramage
    Question Received: I am toying with the idea of migrating the current information first and the remainder of the history at a later date. I have heard that the conversion tool copes with this, but haven't found any information on how it does. Answer: The Toolkit will support iterative conversions as long as the original master data key tables (the CK_* tables) are not cleared down from Staging (the already converted Transactional Data would need to be cleared down) and the Production instance being migrated into is actually Production (we have migrated into a pre-prod instance in the past and then unloaded this and loaded it into the real PROD instance, but this will not work for your situation. You need to be migrating directly into your intended environment). In this case the migration tool will still know all about the original keys and the generated keys for the primary objects (Account, SA, etc.) and as such it will be able to link the data converted as part of a second pass onto these entities. It should be noted that this may result in the original opening balances potentially being displayed with an incorrect value (if we are talking about Financial Transactions) and also that care will have to be taken to ensure that all related objects are aligned (eg. A Bill must have a set to bill segments, meter reads and a financial transactions, and these entities cannot exist independantly). It should also be noted that subsequent runs of the conversion tool would need to be 'trimmed' to ensure that they are only doing work on the objects affected. You would not want to revalidate and migrate all Person, Account, SA, SA/SP, SP and Premise details since this information has already been processed, but you would definitely want to run the affected transactional record validation and keygen processes. There is no real "hard-and-fast" rule around this processing since is it specific to each implmentations needs, but the majority of the effort required should be detailed in the Conversion Tool section of the online help (under Adminstration/ The Conversion Tool). The major rule is to ensure that you only run the steps and validation/keygen steps that you need and do not do a complete rerun for your subsequent conversion.

    Read the article

  • Silverlight Cream for April 23, 2010 -- #845

    - by Dave Campbell
    In this Issue: Jason Allor, Bill Reiss, Mike Snow, Tim Heuer, John Papa, Jeremy Likness, and Dave Campbell. Shoutouts: You saw it at MIX10 and DevConnections... now you can give it a dance, John Papa announced eBay Simple Lister Beta Now Available Mike Snow posted some info about and a link to his new Flickr/Bing/Google High End Image Viewer and he's looking for feedback From SilverlightCream.com: Hierarchical Data Trees With A Custom DataSource Jason Allor is rounding out a series here in his new blog (bookmark it), and he's created his own custom HierarchicalDataSource class for use with the TreeView. Space Rocks game step 11: Start level logic Bill Reiss has Episode 11 up in his Space Rocks game ... working on NewGame and start level logic Silverlight Tip of the Day #3 – Mouse Right Clicks Mike Snow has Tip 3 up ... about handling right-mouse clicks in Silverlight 4 -- oh yeah, we got right mouse now ... grab Mike's project to check it out. Silverlight 4 enables Authorization header modification Tim Heuer talks about the ability to modify the Authorization header in network calls with Silverlight 4. He gives not only the quick-and-dirty of how to use it, but has some good examples, code, and code results for show and tell. WCF RIA Services - Hands On Lab John Papa built a bookstore app in roughly 10 minutes in the keynote at DevConnections. He now has a tutorial on doing just that plus all the code up. Transactions with MVVM Not strictly Silverlight (or WPF), but Jeremy Likness has an interesting article up on MVVM and transaction processing. Read the post then grab his helper class. Your First Windows Phone 7 Application As with the First Silverlight App a couple weeks ago, if you've got any WP7 experience at all, just keep going... this is for folks that have not looked at it yet, have not downloaded anything... oh, and it's by Dave Campbell Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • wrt54gl reboots; troubleshooting steps?

    - by Bill
    I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

    Read the article

  • How can I automate FTP downloads based on date without bi-directional syncing?

    - by Bill
    I have a particular FTP-related situation that I'm having trouble finding a solution for. I need an FTP download/syncing application that can operate within the following parameters: It must run under Windows (installing Python to be able to run a script or some such thing is an acceptable solution). It must be able to ignore files before a certain date (I want to start downloading new files, not all the files that exist in this very large FTP directory). I don't want bi-directional syncing (e.g. I don't want changes I make to the local files and directory structure to change the remote FTP server, the FTP server needs to be left completely alone). Automating it in some fashion would be ideal. What would you guys suggest? The solutions I'm turning up are all missing the mark in some fashion (e.g. they have bi-directional syncing or they have no way of starting the syncing today instead of trying to pull down the entire directory).

    Read the article

  • HaProxy - Http and SSL pass through config

    - by Bill
    I've currently got an HaProxy LB solution in place and everything is working fine however we are having an issue with a very few clients who cannot get to our site via HTTPS (SSL) they can browse our site in Http but as soon as they click on an absolute HTTPS link they are taken to our home page instead. Wondering if anyone can look at our config below and see if there's something awry. I believe we are on HaProxy 1.2.17 global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 6144 #debug #quiet user haproxy group haproxy defaults log global mode http option httplog option dontlognull retries 3 redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 stats auth # admin password stats uri /monitor listen webfarm # bind :80,:443 bind :443 mode tcp balance source #cookie SERVERID insert indirect #option httpclose #option forwardfor #option httpchk HEAD /check.cfm HTTP/1.0 server webA 111.10.10.1 #server webB 111.10.10.2 server webB 111.10.10.3 server webC 111.10.10.4 listen webfarmhttp :80 mode http balance source # option httpclose option forwardfor # option httpchk HEAD /check.cfm HTTP/1.0 option httpchk /check.cfm server webA 111.10.10.1 #server webB 111.10.10.2 server webB 111.10.10.3 server webC 111.10.10.4 listen monitor :8443 mode http balance roundrobin #cookie SERVERID insert indirect option httpclose option forwardfor #option httpchk HEAD /check.txt HTTP/1.0 #option httpchk HEAD /check.cfm HTTP/1.0 server webA 111.10.10.1 server webB 111.10.10.2

    Read the article

  • Make 'volume up' from 'mute' go to volume step one not previous volume on Macbook Pro

    - by Bill Cheatham
    Currently, on my Macbook Pro (OSX 10.6.5), I will often use the 'mute' button to turn the volume off, for example if I'm working at night. I may then watch a video or something, and decide to have the volume on very quietly. So I press the 'volume up' key—but instead of going to volume level one (the logical 'volume step up' from mute), the volume jumps to whatever mega-decibels I was blasting out before I muted in the first place. Is there a way to change the behavior of this? Ideally the 'mute' button would be changed to actually turn the volume to zero, rather than just muting. (And re-pressing mute would turn the volume back up to the original). Thanks!

    Read the article

  • Any tips for designing the invoicing/payment system of a SaaS?

    - by Alexandru Trandafir Catalin
    The SaaS is for real estate companies, and they can pay a monthly fee that will offer them 1000 publications but they can also consume additional publications or other services that will appear on their bill as extras. On registration the user can choose one of the 5 available plans that the only difference will be the quantity of publications their plan allows them to make. But they can pass that limit if they wish, and additional payment will be required on the next bill. A publication means: Publishing a property during one day, for 1 whole month would be: 30 publications. And 5 properties during one day would be 5 publications. So basically the user can: Make publications (already paid in the monthly fee, extra payment only if it passes the limit) Highlight that publication (extra payment) Publish on other websites or printed catalogues (extra payment) Doubts: How to handle modifications in pricing plans? Let's say quantities change, or you want to offer some free stuff. How to handle unpaid invoices? I mean, freeze the service until the payment has been done and then resume it. When to make the invoices? The idea is to make one invoice for the monthly fee and a second invoice for the extra services that were consumed. What payment methods to use? The choosen now is by bank account, and mobile phone validation with a SMS. If user doesn't pay we call that phone and ask for payment. Any examples on billing online services will be welcome! Thanks!

    Read the article

  • Why can't Logman start?

    - by Bill Paetzke
    I'm setting up my first logman counter. But it's not working! There is some file or folder permissions problem. Or maybe I wrote the create-counter statement wrong. Here's my counter commands: logman create counter BillTest -si 30 -v nnnnnn -max 200 -o "C:\Temp" -c "\Processor(*)\*" "\Memory(*)\*" "\LogicalDisk(*)\*" logman start BillTest The first command works. It says counter creation successful. The second command fails: Collection "BillTest" did not start, check the application event log for any errors Here's the error in the Event Viewer: The service was unable to open the log file C:\Temp_000001.blg for log BillTest and will be stopped. Check the log folder for existence, spelling, permissions, and ensure that no other logs or applications are writing to this log file. You can reenter the log file name using the configuration program. This log will not be started. The error returned is: Access is denied. I verified that C:\Temp exists. I'm not a permissions guru, but I did set all the accounts in the security tab of that folder to "full control." Still, the logman start command failed with the same error. I noticed that it was trying to write to C:\Temp_000001.blg instead of C:\Temp\000001.blg. That might be part of the problem. So, I tried to update my counter to "C:\Temp\" instead of "C:\Temp", but that failed with a path-invalid error. Also, all the examples I saw online used did not put a trailing slash. So, no dice there. I tried this on my machine (Windows XP) and my dev server (Windows Server 2003). Both failed with the same error. How can I fix this?

    Read the article

  • What's the difference between Host and HostName in SSH Config?

    - by Bill Jobs
    The man page says this: Host Host Restricts the following declarations (up to the next Host keyword) to be only for those hosts that match one of the patterns given after the keyword. If more than one pattern is provided, they should be separated by whitespace. A single `*' as a pattern can be used to provide global defaults for all hosts. The host is the hostname argument given on the command line (i.e. the name is not converted to a canonicalized host name before matching). A pattern entry may be negated by prefixing it with an exclamation mark (`!'). If a negated entry is matched, then the Host entry is ignored, regardless of whether any other patterns on the line match. Negated matches are therefore useful to provide exceptions for wildcard matches. See PATTERNS for more information on patterns. HostName HostName Specifies the real host name to log into. This can be used to specify nicknames or abbreviations for hosts. If the hostname contains the character sequence `%h', then this will be replaced with the host name specified on the command line (this is useful for manipulating unqualified names). The default is the name given on the com- mand line. Numeric IP addresses are also permitted (both on the command line and in HostName specifications). For example, when I want to create an SSH Config for GitHub, what should Host and HostName be respectively?

    Read the article

  • Server room kit?

    - by Bill Weiss
    I feel like this is a question I've seen on here before, but some searching didn't do me any good. This looks similar, but I'm looking for stuff I leave there, not what's in my go-bag. What would you say is indispensable equipment in your server room? I've inherited one that's a bit light on stuff (except for servers, those are in there). We're in the single digits of racks, if that matters. I'm thinking of things like: Cable labeler Ethernet tester (copper at least, fibre if you need) ... ? Community wiki, because, really. [Edit] I suppose it's important to say that it's a colo facility, kind of far from the office. No food, water, etc. :(

    Read the article

  • How to create full-text catalog as default catalog?

    - by Bill Paetzke
    This would save me the redundant ON MyCatalog phrase when I create full-text indices. For example, CREATE FULLTEXT INDEX ON MyTable ( MyField1, MyField2, MyField3 ) KEY INDEX PK_MyKey ON MyCatalog WITH CHANGE_TRACKING AUTO With MyCatalog set as default catalog, I wouldn't have to specify ON MyCatalog every time I want to create a full-text index. So how can I make MyCatalog default on this database?

    Read the article

  • How to get permission to create full-text index?

    - by Bill Paetzke
    I tried to create a full-text index and got this error: Msg 9967, Level 16, State 1, Line 1 A default full-text catalog does not exist in database 'foo' or user does not have permission to perform this action. FYI--I connected to the target sql server with Windows Authentication. What do I need to do in Sql Server 2005 and/or in Windows Server 2003 to get permissions? Please be thorough (assume I am a n00b). Thank you.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >