Search Results

Search found 3481 results on 140 pages for 'chris massey'.

Page 16/140 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • HTG Explains: Why is Printer Ink So Expensive?

    - by Chris Hoffman
    Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

    Read the article

  • 'Photo editor' and 'RAW editor' in Shotwell

    - by Chris Wilson
    The preference menu in Shotwell allows the user to specify both an 'External photo editor' and an 'External RAW editor', but I'm confused as to why two external editors would be required. I'm not a photographer, so this confusion may simply be a result of my ignorance, but I thought RAW images were unprocessed photographs, in which case two editors would be kinda redundant. Am I simply missing one of the finer details of photograph processing?

    Read the article

  • The Beginner’s Guide To Tabbed Browsing

    - by Chris Hoffman
    Tabs allow you to open multiple web pages in a single browser window without cluttering your desktop. Mastering tabbed browsing can speed up your browsing experience and make multiple web pages easier to manage. Tabbed browsing was once the domain of geeks using alternative browsers, but every popular browser now supports tabbed browsing – even mobile browsers on smartphones and tablets. This article is intended for beginners. If you know someone that doesn’t fully understand tabbed browsing and how awesome it is, feel free to send it to them! How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • Missing features from WebGL and OpenGL ES

    - by Chris Smith
    I've started using WebGL and am pleased with how easy it is to leverage my OpenGL (and by extension OpenGL ES) experience. However, my understanding is as follows: OpenGL ES is a subset of OpenGL WebGL is a subset of OpenGL ES Is this correct for both cases? If so, are there resources for detailing which features are missing? For example, one notable missing feature is glPushMatrix and glPopMatrix. I don't see those in WebGL, but in my searches I cannot find them referenced in OpenGL ES material either.

    Read the article

  • Beginner Geek: How To Change the Boot Order in Your Computer’s BIOS

    - by Chris Hoffman
    The boot order in your computer’s BIOS controls which device it loads the operating system from. Modify your boot order to force your computer to boot from a USB drive, CD or DVD drive, or another hard drive. You may need to change this setting when booting from another device, whether you’re running an operating system from a live USB drive or installing a new operating system from a disc. Note: This process will look different on each computer. The instructions here will guide you through the process, but the screenshots won’t look exactly the same. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Exploring the Excel Services REST API

    - by jamiet
    Over the last few years Analysis Services guru Chris Webb and I have been on something of a crusade to enable better access to data that is locked up in countless Excel workbooks that litter the hard drives of enterprise PCs. The most prominent manifestation of that crusade up to now has been a forum thread that Chris began on Microsoft Answers entitled Excel Web App API? Chris began that thread with: I was wondering whether there was an API for the Excel Web App? Specifically, I was wondering if it was possible (or if it will be possible in the future) to expose data in a spreadsheet in the Excel Web App as an OData feed, in the way that it is possible with Excel Services? Up to recently the last 10 words of that paragraph "in the way that it is possible with Excel Services" had completely washed over me however a comment on my recent blog post Thoughts on ExcelMashup.com (and a rant) by Josh Booker in which Josh said: Excel Services is a service application built for sharepoint 2010 which exposes a REST API for excel documents. We're looking forward to pros like you giving it a try now that Office365 makes sharepoint more easily accessible.  Can't wait for your future blog about using REST API to load data from Excel on Offce 365 in SSIS. made me think that perhaps the Excel Services REST API is something I should be looking into and indeed that is what I have been doing over the past few days. And you know what? I'm rather impressed with some of what Excel Services' REST API has to offer. Unfortunately Excel Services' REST API also has one debilitating aspect that renders this blog post much less useful than it otherwise would be; namely that it is not publicly available from the Excel Web App on SkyDrive. Therefore all I can do in this blog post is show you screenshots of what the REST API provides in Sharepoint rather than linking you directly to those REST resources; that's a great shame because one of the benefits of a REST API is that it is easily and ubiquitously demonstrable from a web browser. Instead I am hosting a workbook on Sharepoint in Office 365 because that does include Excel Services' REST API but, again, all I can do is show you screenshots. N.B. If anyone out there knows how to make Office-365-hosted spreadsheets publicly-accessible (i.e. without requiring a username/password) please do let me know (because knowing which forum on which to ask the question is an exercise in futility). In order to demonstrate Excel Services' REST API I needed some decent data and for that I used the World Tourism Organization Statistics Database and Yearbook - United Nations World Tourism Organization dataset hosted on Azure Datamarket (its free, by the way); this dataset "provides comprehensive information on international tourism worldwide and offers a selection of the latest available statistics on international tourist arrivals, tourism receipts and expenditure" and you can explore the data for yourself here. If you want to play along at home by viewing the data as it exists in Excel then it can be viewed here. Let's dive in.   The root of Excel Services' REST API is the model resource which resides at: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model Note that this is true for every workbook hosted in a Sharepoint document library - each Excel workbook is a RESTful resource. (Update: Mark Stacey on Twitter tells me that "It's turned off by default in onpremise Sharepoint (1 tickbox to turn on though)". Thanks Mark!) The data is provided as an ATOM feed but I have Firefox's feed reading ability turned on so you don't see the underlying XML goo. As you can see there are four top level resources, Ranges, Charts, Tables and PivotTables; exploring one of those resources is where things get interesting. Let's take a look at the Tables Resource: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables Our workbook contains only one table, called ‘Table1’ (to reiterate, you can explore this table yourself here). Viewing that table via the REST API is pretty easy, we simply append the name of the table onto our previous URI: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1') As you can see, that quite simply gives us a representation of the data in that table. What you cannot see from this screenshot is that this is pure HTML that is being served up; that is all well and good but actually we can do more interesting things. If we specify that the data should be returned not as HTML but as: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1')?$format=image then that data comes back as a pure image and can be used in any web page where you would ordinarily use images. This is the thing that I really like about Excel Services’ REST API – we can embed an image in any web page but instead of being a copy of the data, that image is actually live – if the underlying data in the workbook were to change then hitting refresh will show a new image. Pretty cool, no? The same is true of any Charts or Pivot Tables in your workbook - those can be embedded as images too and if the underlying data changes, boom, the image in your web page changes too. There is a lot of data in the workbook so the image returned by that previous URI is too large to show here so instead let’s take a look at a different resource, this time a range: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15') That URI returns cells A1 to C15 from a worksheet called “Data”: And if we ask for that as an image again: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15')?$format=image Were this image resource not behind a username/password then this would be a live image of the data in the workbook as opposed to one that I had to copy and upload elsewhere. Nonetheless I hope this little wrinkle doesn't detract from the inate value of what I am trying to articulate here; that an existing image in a web page can be changed on-the-fly simply by inserting some data into an Excel workbook. I for one think that that is very cool indeed! I think that's enough in the way of demo for now as this shows what is possible using Excel Services' REST API. Of course, not all features work quite how I would like and here is a bulleted list of some of my more negative feedback: The URIs are pig-ugly. Are "_vti_bin" & "ExcelRest.aspx" really necessary as part of the URI? Would this not be better: http://server/Documents/TourismExpenditureInMillionsOfUSD.xlsx/Model/Tables(‘Table1’) That URI provides the necessary addressability and is a lot easier to remember. Discoverability of these resources is not easy, we essentially have to handcrank a URI ourselves. Take the example of embedding a chart into a blog post - would it not be better if I could browse first through the document library to an Excel workbook and THEN through the workbook to the chart/range/table that I am interested in? Call it a wizard if you like. That would be really cool and would, I am sure, promote this feature and cut down on the copy-and-paste disease that the REST API is meant to alleviate. The resources that I demonstrated can be returned as feeds as well as images or HTML simply by changing the format parameter to ?$format=atom however for some inexplicable reason they don't return OData and no-one on the Excel Services team can tell me why (believe me, I have asked). $format is an OData parameter however other useful parameters such as $top and $filter are not supported. It would be nice if they were. Although I haven't demonstrated it here Excel Services' REST API does provide a makeshift way of altering the data by changing the value of specific cells however what it does not allow you to do is add new data into the workbook. Google Docs allows this and was one of the motivating factors for Chris Webb's forum post that I linked to above. None of this works for Excel workbooks hosted on SkyDrive This blog post is as long as it needs to be for a short introduction so I'll stop now. If you want to know more than I recommend checking out a few links: Excel Services REST API documentation on MSDNSo what does REST on Excel Services look like??? by Shahar PrishExcel Services in SharePoint 2010 REST API Syntax by Christian Stich. Any thoughts? Let's hear them in the comments section below! @Jamiet 

    Read the article

  • 7 Ways Modern Windows 8 Apps Are Different From Windows Desktop Apps

    - by Chris Hoffman
    Windows 8 apps – originally known as Metro-style apps and now known as Windows 8 style, Modern UI style, or Windows Store style apps, depending on which Microsoft employee you ask — are very different from traditional desktop apps. The Modern interface isn’t just a fresh coat of paint. The new Windows Runtime, or WinRT, application architecture (not to be confused with Windows RT) is very different from the Windows desktop we’re used to. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

    - by Chris Hoffman
    IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled:  Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr     

    Read the article

  • Best SEO practices for mobile URLs: 301, rel=canonical, or something else?

    - by Chris
    I am developing a site with a mobile version and am trying to figure the appropriate way to manage the URLs for search engines. So far I've considered: Having a mobile site with rel="canonical" links to the regular site. Putting both the mobile site and full site on one URL, and doing user agent sniffing. Another opinion: Spencer: "If you have a mobile site at a separate location or URL, you should 301 redirect each and every mobile page to its corresponding page on your main website. Employ user agent detection so that the mobile optimized version is served up if someone's coming in from a hand-held. - http://developer.practicalecommerce.com/articles/1722-Mobile-site-Development-Best-Practices-for-SEO-Usability Both 2 and 3 make it hard for a user who wants to switch to the full site or mobile site manually, but I'm not sure 1 is the best alternative. What's the best way to write URLs for a mobile site?

    Read the article

  • How to Connect Your Android to Your PC’s Internet Connection Over USB

    - by Chris Hoffman
    People often “tether” their computers to their smartphones, sending their computer’s network traffic over the device’s cellular data connection. “Reverse tethering” is the opposite – tethering your Android smartphone or tablet to your PC to use your PC’s Internet connection. This method requires a rooted Android and a Windows PC, but it’s very easy to use. If your computer has Wi-Fi, it may be easier to create a Wi-Fi hotspot using a utility like Connectify instead. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • Adding a website link to the Member Directory in DotNetNuke 6.2

    - by Chris Hammond
    In case you missed it, DotNetNuke 6.2 was released today, check out Will Morgenweck’s blog post for more details on the release . With some of the new features DotNetNuke 6.2 makes it easier to start to customize the listing of members on your site, and also the Profile display for users on the website. I started implementing DotNetNuke 6.2 on one of my racing websites last night (yeah, so I upgraded before the release happened, a benefit of working for the corp ). In doing so I configured the profile...(read more)

    Read the article

  • Windows 8.1 Will Start Encrypting Hard Drives By Default: Everything You Need to Know

    - by Chris Hoffman
    Windows 8.1 will automatically encrypt the storage on modern Windows PCs. This will help protect your files in case someone steals your laptop and tries to get at them, but it has important ramifications for data recovery. Previously, “BitLocker” was available on Professional and Enterprise editions of Windows, while “Device Encryption” was available on Windows RT and Windows Phone. Device encryption is included with all editions of Windows 8.1 — and it’s on by default. When Your Hard Drive Will Be Encrypted Windows 8.1 includes “Pervasive Device Encryption.” This works a bit differently from the standard BitLocker feature that has been included in Professional, Enterprise, and Ultimate editions of Windows for the past few versions. Before Windows 8.1 automatically enables Device Encryption, the following must be true: The Windows device “must support connected standby and meet the Windows Hardware Certification Kit (HCK) requirements for TPM and SecureBoot on ConnectedStandby systems.”  (Source) Older Windows PCs won’t support this feature, while new Windows 8.1 devices you pick up will have this feature enabled by default. When Windows 8.1 installs cleanly and the computer is prepared, device encryption is “initialized” on the system drive and other internal drives. Windows uses a clear key at this point, which is removed later when the recovery key is successfully backed up. The PC’s user must log in with a Microsoft account with administrator privileges or join the PC to a domain. If a Microsoft account is used, a recovery key will be backed up to Microsoft’s servers and encryption will be enabled. If a domain account is used, a recovery key will be backed up to Active Directory Domain Services and encryption will be enabled. If you have an older Windows computer that you’ve upgraded to Windows 8.1, it may not support Device Encryption. If you log in with a local user account, Device Encryption won’t be enabled. If you upgrade your Windows 8 device to Windows 8.1, you’ll need to enable device encryption, as it’s off by default when upgrading. Recovering An Encrypted Hard Drive Device encryption means that a thief can’t just pick up your laptop, insert a Linux live CD or Windows installer disc, and boot the alternate operating system to view your files without knowing your Windows password. It means that no one can just pull the hard drive from your device, connect the hard drive to another computer, and view the files. We’ve previously explained that your Windows password doesn’t actually secure your files. With Windows 8.1, average Windows users will finally be protected with encryption by default. However, there’s a problem — if you forget your password and are unable to log in, you’d also be unable to recover your files. This is likely why encryption is only enabled when a user logs in with a Microsoft account (or connects to a domain). Microsoft holds a recovery key, so you can gain access to your files by going through a recovery process. As long as you’re able to authenticate using your Microsoft account credentials — for example, by receiving an SMS message on the cell phone number connected to your Microsoft account — you’ll be able to recover your encrypted data. With Windows 8.1, it’s more important than ever to configure your Microsoft account’s security settings and recovery methods so you’ll be able to recover your files if you ever get locked out of your Microsoft account. Microsoft does hold the recovery key and would be capable of providing it to law enforcement if it was requested, which is certainly a legitimate concern in the age of PRISM. However, this encryption still provides protection from thieves picking up your hard drive and digging through your personal or business files. If you’re worried about a government or a determined thief who’s capable of gaining access to your Microsoft account, you’ll want to encrypt your hard drive with software that doesn’t upload a copy of your recovery key to the Internet, such as TrueCrypt. How to Disable Device Encryption There should be no real reason to disable device encryption. If nothing else, it’s a useful feature that will hopefully protect sensitive data in the real world where people — and even businesses — don’t enable encryption on their own. As encryption is only enabled on devices with the appropriate hardware and will be enabled by default, Microsoft has hopefully ensured that users won’t see noticeable slow-downs in performance. Encryption adds some overhead, but the overhead can hopefully be handled by dedicated hardware. If you’d like to enable a different encryption solution or just disable encryption entirely, you can control this yourself. To do so, open the PC settings app — swipe in from the right edge of the screen or press Windows Key + C, click the Settings icon, and select Change PC settings. Navigate to PC and devices -> PC info. At the bottom of the PC info pane, you’ll see a Device Encryption section. Select Turn Off if you want to disable device encryption, or select Turn On if you want to enable it — users upgrading from Windows 8 will have to enable it manually in this way. Note that Device Encryption can’t be disabled on Windows RT devices, such as Microsoft’s Surface RT and Surface 2. If you don’t see the Device Encryption section in this window, you’re likely using an older device that doesn’t meet the requirements and thus doesn’t support Device Encryption. For example, our Windows 8.1 virtual machine doesn’t offer Device Encryption configuration options. This is the new normal for Windows PCs, tablets, and devices in general. Where files on typical PCs were once ripe for easy access by thieves, Windows PCs are now encrypted by default and recovery keys are sent to Microsoft’s servers for safe keeping. This last part may be a bit creepy, but it’s easy to imagine average users forgetting their passwords — they’d be very upset if they lost all their files because they had to reset their passwords. It’s also an improvement over Windows PCs being completely unprotected by default.     

    Read the article

  • How to Find Your Computer’s Private & Public IP Addresses

    - by Chris Hoffman
    An IP address (or Internet Protocol address) identifies each networked computer and device on a network. When computers communicate with each other on the Internet or a local network, they send information to each other’s IP addresses. Your computer likely has public and private IP addresses. You’ll need the IP address if you’re hosting server software – the client computers will need your computer’s IP address to connect to it. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • A simple DotNetNuke article module with C# and VB.NET Source

    - by Chris Hammond
    For the DotNetNuke Connections conference last month I provided an advanced DotNetNuke module development course as a pre-conference training session. That training covered details on how to implement some of the newer features in the DotNetNuke platform within custom modules, mainly ContentItem integration and Taxonomy features. For the course I created a very basic Article module for DotNetNuke, ultimately naming it DNNSimpleArticle. For the course I created both a C# and a VB.NET version of the...(read more)

    Read the article

  • Couldn't find package - But package is listed in the Packages file

    - by Chris
    (Quoted items are redacted elements) I am using a private repository and an currently trying to repackage some packages 3rd-party packages. I extract the package, make a few modifications (just the control files to fit with company policy - though sometimes file install locations though not in this case) and repackage (and usually rename). Normally I copy the files into a new blank debhelper project and reconstruct the package, however, with a recent one I attempting to convert and some libraries and stuff aren't linking properly (I did copy the postinst, postrm, and preinst files along with all DEDIAN files exactly), the original package worked, but my repackage doesn't, despite providing the same files in the same locations and the same postinst and preinst. So I was attempting to just modify the current packages control files (as the original package is not very good and will not list in our repository and getting a better one from the 3rd party is not an option). I also renamed the package. I did the following: dpkg-deb -R "directory" Modify DEBIAN/control dpkg-deb -b "directory" "package name I want" I did this and put it in our repository. The package shows up in the "Packages" file on the repository and running apt-get update on the client side shows the package in: /var/lib/apt/lists/"server"_"location"_Packages However when I do an apt-get install on the package name (as listed in the Packages file - I did a copy paste) it says it can't find the package. Same with an apt-cache search The Packages listings is as follow (name redacted): Package: "package name" Priority: extra Section: unknown Maintainer: "maintainer" Architecture: any Version: 1.0-lucid5 Depends: libc Filename: "directory"/"package_filename" Size: 2206292 MD5sum: "md5sum" SHA1: "sha key" SHA256: "sha256 key" Description: "description" I am running as sudo (and tried as root as well). I don't understand why apt-get won't see the package. Can you point out any flaws in what I have done, or perhaps some help on getting apt-get to properly see the package. Or perhaps an alternative. I am not even sure if this is a valid way to repackage something. Thanks.

    Read the article

  • Gnome Do not Launching

    - by PyRulez
    When I try running gnome do, I get this. chris@Chris-Ubuntu-Laptop:~$ gnome-do pgrep: invalid user name: -u and it is not writable Trying sudo: chris@Chris-Ubuntu-Laptop:~$ sudo gnome-do [NetworkService] Could not initialize Network Manager dbus: Unable to open the session message bus. [Error 17:54:30.122] [SystemService] Could not initialize dbus: Unable to open the session message bus. (Do:2401): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (Do:2401): libdo-WARNING **: Binding '<Super>space' failed! [Error 17:54:30.649] [AbstractKeyBindingService] Key "" is already mapped. Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . ^[^\Full thread dump: "<unnamed thread>" tid=0x0xb7570700 this=0x0x56f18 thread handle 0x403 state : not waiting owns () at (wrapper managed-to-native) Mono.Unix.Native.Syscall.read (int,intptr,ulong) <0xffffffff> at Mono.Unix.Native.Syscall.read (int,void*,ulong) <0x00023> at Mono.Unix.UnixStream.Read (byte[],int,int) <0x0008b> at NDesk.DBus.Connection.ReadMessage () <0x0003c> at NDesk.DBus.Connection.Iterate () <0x0001b> at NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0x00033> at (wrapper native-to-managed) NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0xffffffff> at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) <0xffffffff> at Gtk.Clipboard.WaitIsTextAvailable () <0x00017> at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) <0x00027> at Do.Platform.AbstractApplicationService.OnSummoned () <0x00025> at Do.Platform.ApplicationService.<ApplicationService>m__31 (object,System.EventArgs) <0x00013> at Do.Core.Controller.OnSummoned () <0x00025> at Do.Core.Controller.Summon () <0x00027> at Do.Do.Main (string[]) <0x001eb> at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <0xffffffff> "<unnamed thread>" tid=0x0xb2c81b40 this=0x0x194150 thread handle 0x412 state : interrupted state owns () at (wrapper managed-to-native) System.IO.InotifyWatcher.ReadFromFD (intptr,byte[],intptr) <0xffffffff> at System.IO.InotifyWatcher.Monitor () <0x0005f> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> "Universe Update Dispatcher" tid=0x0xb29ffb40 this=0x0x569d8 thread handle 0x41b state : interrupted state owns () at (wrapper managed-to-native) System.Threading.WaitHandle.WaitOne_internal (System.Threading.WaitHandle,intptr,int,bool) <0xffffffff> at System.Threading.WaitHandle.WaitOne (System.TimeSpan,bool) <0x00133> at System.Threading.WaitHandle.WaitOne (System.TimeSpan) <0x00022> at Do.Core.UniverseManager.UniverseUpdateLoop () <0x0007a> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . It stops when I try my key combination, ctrl-alt-. It does not pop up though.

    Read the article

  • 3D Ray Casting / Picking

    - by Chris
    Hi, I am not sure if I should post this link, but I feel this falls into game development just as much as it does math. I have a ray cast's far and near values and I am trying to calculate the end point of the ray so that I can either draw a line to show the ray, or render an object at the end of 3d mouse position. Here is my post on the stack overflow math site, if there is a problem with me doing this just close the thread. Thank you. http://math.stackexchange.com/questions/15918/help-with-matrix-mathematica

    Read the article

  • Macbook Pro wifi won't work

    - by Chris Dudley
    I opened xdiganose and it told me to go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware in order to download and install the wireless driver. I followed the instructions for Ubuntu and it aborted the installation saying something about an unsupported device (I should've saved the output, I'm using a late 2011 13" Macbook Pro.) Now when I trysudo apt-get install firmware-b43-installer I get this: Reading package lists... Done Building dependency tree Reading state information... Done firmware-b43-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 338 not upgraded. What do I do?

    Read the article

  • HTG Explains: How Private Browsing Works and Why It Doesn’t Offer Complete Privacy

    - by Chris Hoffman
    Private Browsing, InPrivate Browsing, Incognito Mode – it has a lot of names, but it’s the same basic feature in every browser. Private browsing offers some improved privacy, but it’s not a silver bullet that makes you completely anonymous online. Private Browsing mode changes the way your browser behaves, whether you’re using Mozilla Firefox, Google Chrome, Internet Explorer, Apple Safari, Opera or any other browser – but it doesn’t change the way anything else behaves. How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

    Read the article

  • HTG Explains: Do Non-Windows Platforms Like Mac, Android, iOS, and Linux Get Viruses?

    - by Chris Hoffman
    Viruses and other types of malware seem largely confined to Windows in the real world. Even on a Windows 8 PC, you can still get infected with malware. But how vulnerable are other operating systems to malware? When we say “viruses,” we’re actually talking about malware in general. There’s more to malware than just viruses, although the word virus is often used to talk about malware in general. Why Are All the Viruses For Windows? Not all of the malware out there is for Windows, but most of it is. We’ve tried to cover why Windows has the most viruses in the past. Windows’ popularity is definitely a big factor, but there are other reasons, too. Historically, Windows was never designed for security in the way that UNIX-like platforms were — and every popular operating system that’s not Windows is based on UNIX. Windows also has a culture of installing software by searching the web and downloading it from websites, whereas other platforms have app stores and Linux has centralized software installation from a secure source in the form of its package managers. Do Macs Get Viruses? The vast majority of malware is designed for Windows systems and Macs don’t get Windows malware. While Mac malware is much more rare, Macs are definitely not immune to malware. They can be infected by malware written specifically for Macs, and such malware does exist. At one point, over 650,000 Macs were infected with the Flashback Trojan. [Source] It infected Macs through the Java browser plugin, which is a security nightmare on every platform. Macs no longer include Java by default. Apple also has locked down Macs in other ways. Three things in particular help: Mac App Store: Rather than getting desktop programs from the web and possibly downloading malware, as inexperienced users might on Windows, they can get their applications from a secure place. It’s similar to a smartphone app store or even a Linux package manager. Gatekeeper: Current releases of Mac OS X use Gatekeeper, which only allows programs to run if they’re signed by an approved developer or if they’re from the Mac App Store. This can be disabled by geeks who need to run unsigned software, but it acts as additional protection for typical users. XProtect: Macs also have a built-in technology known as XProtect, or File Quarantine. This feature acts as a blacklist, preventing known-malicious programs from running. It functions similarly to Windows antivirus programs, but works in the background and checks applications you download. Mac malware isn’t coming out nearly as quick as Windows malware, so it’s easier for Apple to keep up. Macs are certainly not immune to all malware, and someone going out of their way to download pirated applications and disable security features may find themselves infected. But Macs are much less at risk of malware in the real world. Android is Vulnerable to Malware, Right? Android malware does exist and companies that produce Android security software would love to sell you their Android antivirus apps. But that isn’t the full picture. By default, Android devices are configured to only install apps from Google Play. They also benefit from antimalware scanning — Google Play itself scans apps for malware. You could disable this protection and go outside Google Play, getting apps from elsewhere (“sideloading”). Google will still help you if you do this, asking if you want to scan your sideloaded apps for malware when you try to install them. In China, where many, many Android devices are in use, there is no Google Play Store. Chinese Android users don’t benefit from Google’s antimalware scanning and have to get their apps from third-party app stores, which may contain infected copies of apps. The majority of Android malware comes from outside Google Play. The scary malware statistics you see primarily include users who get apps from outside Google Play, whether it’s pirating infected apps or acquiring them from untrustworthy app stores. As long as you get your apps from Google Play — or even another secure source, like the Amazon App Store — your Android phone or tablet should be secure. What About iPads and iPhones? Apple’s iOS operating system, used on its iPads, iPhones, and iPod Touches, is more locked down than even Macs and Android devices. iPad and iPhone users are forced to get their apps from Apple’s App Store. Apple is more demanding of developers than Google is — while anyone can upload an app to Google Play and have it available instantly while Google does some automated scanning, getting an app onto Apple’s App Store involves a manual review of that app by an Apple employee. The locked-down environment makes it much more difficult for malware to exist. Even if a malicious application could be installed, it wouldn’t be able to monitor what you typed into your browser and capture your online-banking information without exploiting a deeper system vulnerability. Of course, iOS devices aren’t perfect either. Researchers have proven it’s possible to create malicious apps and sneak them past the app store review process. [Source] However, if a malicious app was discovered, Apple could pull it from the store and immediately uninstall it from all devices. Google and Microsoft have this same ability with Android’s Google Play and Windows Store for new Windows 8-style apps. Does Linux Get Viruses? Malware authors don’t tend to target Linux desktops, as so few average users use them. Linux desktop users are more likely to be geeks that won’t fall for obvious tricks. As with Macs, Linux users get most of their programs from a single place — the package manager — rather than downloading them from websites. Linux also can’t run Windows software natively, so Windows viruses just can’t run. Linux desktop malware is extremely rare, but it does exist. The recent “Hand of Thief” Trojan supports a variety of Linux distributions and desktop environments, running in the background and stealing online banking information. It doesn’t have a good way if infecting Linux systems, though — you’d have to download it from a website or receive it as an email attachment and run the Trojan. [Source] This just confirms how important it is to only run trusted software on any platform, even supposedly secure ones. What About Chromebooks? Chromebooks are locked down laptops that only run the Chrome web browser and some bits around it. We’re not really aware of any form of Chrome OS malware. A Chromebook’s sandbox helps protect it against malware, but it also helps that Chromebooks aren’t very common yet. It would still be possible to infect a Chromebook, if only by tricking a user into installing a malicious browser extension from outside the Chrome web store. The malicious browser extension could run in the background, steal your passwords and online banking credentials, and send it over the web. Such malware could even run on Windows, Mac, and Linux versions of Chrome, but it would appear in the Extensions list, would require the appropriate permissions, and you’d have to agree to install it manually. And Windows RT? Microsoft’s Windows RT only runs desktop programs written by Microsoft. Users can only install “Windows 8-style apps” from the Windows Store. This means that Windows RT devices are as locked down as an iPad — an attacker would have to get a malicious app into the store and trick users into installing it or possibly find a security vulnerability that allowed them to bypass the protection. Malware is definitely at its worst on Windows. This would probably be true even if Windows had a shining security record and a history of being as secure as other operating systems, but you can definitely avoid a lot of malware just by not using Windows. Of course, no platform is a perfect malware-free environment. You should exercise some basic precautions everywhere. Even if malware was eliminated, we’d have to deal with social-engineering attacks like phishing emails asking for credit card numbers. Image Credit: stuartpilbrow on Flickr, Kansir on Flickr     

    Read the article

  • The Krewe App Post-Mortem

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2014/05/23/the-krewe-app-post-mortem.aspxNow that teched has come and gone, I thought I would use this opportunity to do a little post-mortem on The Krewe app. It is one thing to test the app at home. It is a completely different animal to see how it responds in the environment TechEd creates. At a future time, I will list all the things that I would like to change with the app. At this point, I will find some good way to get community feedback. I want to break all this down screen by screen. We'll start with the screen I got right. The first of these is the events calendar. This is the one screen that, to you guys, just worked. However, there was an issue here. When I wrote v1 for last year, I was lazy and placed everything in CST. This caused problems with the achievements, which I will explain later. Furthermore, the event locations were not check-in locations. This created another problem with the achievements. Next, we get to the Twitter page. For what this page does, it works great. For those that don't know, I have an Azure Worker Role that polls Twitter pretty close to the rate limit. I cache these results in my database, and serve them upon request. This gives me great control over the content. I just have to remember to flush past tweets after a period, to save database growth. The next screen is the check-in screen. This screen has been the bane of my existence since I first created the thing. Last year, I used a background task to check people out of locations after they traveled. This year, I removed the background task in favor of a foursquare model. You are checked out after 3 hours or when you check-in to some other location. This seemed to work well, until those pesky achievements came into the mix. Again, more on this later. Next, I want to address the Connect and Connections screens together. I wanted to use some of the capabilities of the phone, and NFC seemed a natural choice. From this, I came up with the gamification aspects of the app. Since we are, fundamentally, a networking organization, I wanted to encourage people to actually network. Users could make and share a profile, similar to a virtual business card. I just had to figure out how to get people to use the feature. Why not just give someone a business card? Thus, the achievements were born. This was such a good idea. It would have been a great idea, if I have come up with it about two months earlier... When I came up with these ideas, I had about 2 weeks to implement them. Version 1 of the app was, basically, a pure consumption app. We provided data and centralized it. With version 2, the app became a much more interactive experience. The API was not ready for this change in such a short period of time. Most of this became apparent when I started implementing the achievements. The achievements based on count and specific person when fairly easy. The problem came with tying them to locations and events. This took some true SQL kung fu. This also showed me the rookie mistake of putting CST, not UTC, in the database. Once I got all of that cleaned up, I had to find a way to get the achievement system to talk to the phone. I knew I needed to be able to dynamically add achievements. I wouldn't know the precise location of some things until I got to Houston. I wanted the server to approve the achievements. This, unfortunately, required a decent data connection. Some achievements required GPS levels of location accuracy in areas of network triangulation. All of this became a huge nightmare. My flagship feature was based on some silly assumptions. Still, I managed to get 31 people to get the first achievement (Make 1 Connection.) Quite a few of those managed to get to the higher levels. Soon, I will post a list of the feature and changes that need to happen to the API. This includes things like proper objects for communication, geo-fencing, and caching. However, that is for another day.

    Read the article

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • HTG Explains: What Does “Bricking” a Device Mean?

    - by Chris Hoffman
    When someone breaks a device and turns it into an expensive brick, people say they “bricked” it. We’ll cover exactly what causes bricking and why, how you can avoid it, and what to do if you have a bricked device. Bear in mind that many people use the term “bricking” incorrectly and refer to a device that isn’t working properly as “bricked.” if you can easily recover the device through a software process, it’s technically not “bricked.” Image Credit: Esparta Palma on Flickr HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    - by Chris Hoffman
    Safe mode can help you troubleshoot your Android, but sometimes you’ll need to wipe everything and restore your device to its factory state. You can even perform a factory reset when your Android phone or tablet won’t boot normally. Ensure you have any important data backed up before doing a reset. This includes your Google Authenticator credentials, which will be lost during the reset. Disable two-factor authentication on your accounts first or you’ll experience some trouble afterwards. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >