Search Results

Search found 388 results on 16 pages for 'clarity'.

Page 16/16 | < Previous Page | 12 13 14 15 16 

  • PASS: Bylaw Change 2013

    - by Bill Graziano
    PASS launched a Global Growth Initiative in the Summer of 2011 with the appointment of three international Board advisors.  Since then we’ve thought and talked extensively about how we make PASS more relevant to our members outside the US and Canada.  We’ve collected much of that discussion in our Global Growth site.  You can find vision documents, plans, governance proposals, feedback sites, and transcripts of Twitter chats and town hall meetings.  We also address these plans at the Board Q&A during the 2012 Summit. One of the biggest changes coming out of this process is around how we elect Board members.  And that requires a change to the bylaws.  We published the proposed bylaw changes as a red-lined document so you can clearly see the changes.  Our goal in these bylaw changes was to address the changes required by the global growth initiatives, conduct a legal review of the document and address other minor issues in the document.  There are numerous small wording changes throughout the document.  For example, we replaced every reference of “The Corporation” with the word “PASS” so it now reads “PASS is organized…”. Board Composition The biggest change in these bylaw changes is how the Board is composed and elected.  This discussion starts in section VI.2.  This section now says that some elected directors will come from geographic regions.  I think this is the best way to make sure we give all of our members a voice in the leadership of the organization.  The key parts of this section are: The remaining Directors (i.e. the non-Officer Directors and non-Vendor Appointed Directors) shall be elected by the voting membership (“Elected Directors”). Elected Directors shall include representatives of defined PASS regions (“Regions”) as set forth below (“Regional Directors”) and at minimum one (1) additional Director-at-Large whose selection is not limited by region. Regional Directors shall include, but are not limited to, two (2) seats for the Region covering Canada and the United States of America. Additional Regions for the purpose of electing additional Regional Directors and additional Director-at-Large seats for the purpose of expanding the Board shall be defined by a majority vote of the current Board of Directors and must be established prior to the public call for nominations in the general election. Previously defined Regions and seats approved by the Board of Directors shall remain in effect and can only be modified by a 2/3 majority vote by the then current Board of Directors. Currently PASS has six At-Large Directors elected by the members.  These changes allow for a Regional Director position that is elected by the members but must come from a particular region.  It also stipulates that there must always be at least one Director-at-Large who can come from any region. We also understand that PASS is currently a very US-centric organization.  Our Summit is held in America, roughly half our chapters are in the US and Canada and most of the Board members over the last ten years have come from America.  We wanted to reflect that by making sure that our US and Canadian volunteers would continue to play a significant role by ensuring that two Regional seats are reserved specifically for Canada and the US. Other than that, the bylaws don’t create any specific regional seats.  These rules allow us to create Regional Director seats but don’t require it.  We haven’t fully discussed what the criteria will be in order for a region to have a seat designated for it or how many regions there will be.  In our discussions we’ve broadly discussed regions for United States and Canada Europe, Middle East, and Africa (EMEA) Australia, New Zealand and Asia (also known as Asia Pacific or APAC) Mexico, South America, and Central America (LATAM) As you can see, our thinking is that there will be a few large regions.  I’ve also considered a non-North America region that we can gradually split into the regions above as our membership grows in those areas.  The regions will be defined by a policy document that will be published prior to the elections. I’m hoping that over the next year we can begin to publish more of what we do as Board-approved policy documents. While the bylaws only require a single non-region specific At-large Director, I would expect we would always have two.  That way we can have one in each election.  I think it’s important that we always have one seat open that anyone who is eligible to run for the Board can contest.  The Board is required to have any regions defined prior to the start of the election process. Board Elections – Regional Seats We spent a lot of time discussing how the elections would work for these Regional Director seats.  Ultimately we decided that the simplest solution is that every PASS member should vote for every open seat.  Section VIII.3 reads: Candidates who are eligible (i.e. eligible to serve in such capacity subject to the criteria set forth herein or adopted by the Board of Directors) shall be designated to fill open Board seats in the following order of priority on the basis of total votes received: (i) full term Regional Director seats, (ii) full term Director-at-Large seats, (iii) not full term (vacated) Regional Director seats, (iv) not full term (vacated) Director-at-Large seats. For the purposes of clarity, because of eligibility requirements, it is contemplated that the candidates designated to the open Board seats may not receive more votes than certain other candidates who are not selected to the Board. We debated whether to have multiple ballots or one single ballot.  Multiple ballot elections get complicated quickly.  Let’s say we have a ballot for US/Canada and one for Region 2.  After that we’d need a mechanism to merge those two together and come up with the winner of the at-large seat or have another election for the at-large position.  We think the best way to do this is a single ballot and putting the highest vote getters into the most restrictive seats.  Let’s look at an example: There are seats open for Region 1, Region 2 and at-large.  The election results are as follows: Candidate A (eligible for Region 1) – 550 votes Candidate B (eligible for Region 1) – 525 votes Candidate C (eligible for Region 1) – 475 votes Candidate D (eligible for Region 2) – 125 votes Candidate E (eligible for Region 2) – 75 votes In this case, Candidate A is the winner for Region 1 and is assigned that seat.  Candidate D is the winner for Region 2 and is assigned that seat.  The at-large seat is filled by the high remaining vote getter which is Candidate B. The key point to understand is that we may have a situation where a person with a lower vote total is elected to a regional seat and a person with a higher vote total is excluded.  This will be true whether we had multiple ballots or a single ballot.  Board Elections – Vacant Seats The other change to the election process is for vacant Board seats.  The actual changes are sprinkled throughout the document. Previously we didn’t have a mechanism that allowed for an election of a Board seat that we knew would be vacant in the future.  The most common case is when a Board members moves to an Officer role in the middle of their term.  One of the key changes is to allow the number of votes members have to match the number of open seats.  This allows each voter to express their preference on all open seats.  This only applies when we know about the opening prior to the call for nominations.  This all means that if there’s a seat will be open at the start of the next Board term, and we know about it prior to the call for nominations, we can include that seat in the elections.  Ultimately, the aim is to have PASS members decide who sits on the Board in as many situations as possible. We discussed the option of changing the bylaws to just take next highest vote-getter in all other cases.  I think that’s wrong for the following reasons: All voters aren’t able to express an opinion on all candidates.  If there are five people running for three seats, you can only vote for three.  You have no way to express your preference between #4 and #5. Different candidates may have different information about the number of seats available.  A person may learn that a Board member plans to resign at the end of the year prior to that information being made public. They may understand that the top four vote getters will end up on the Board while the rest of the members believe there are only three openings.  This may affect someone’s decision to run.  I don’t think this creates a transparent, fair election. Board members may use their knowledge of the election results to decide whether to remain on the Board or not.  Admittedly this one is unlikely but I don’t want to create a situation where this accusation can be leveled. I think the majority of vacancies in the future will be handled through elections.  The bylaw section quoted above also indicates that partial term vacancies will be filled after the full term seats are filled. Removing Directors Section VI.7 on removing directors has always had a clause that allowed members to remove an elected director.  We also had a clause that allowed appointed directors to be removed.  We added a clause that allows the Board to remove for cause any director with a 2/3 majority vote.  The updated text reads: Any Director may be removed for cause by a 2/3 majority vote of the Board of Directors whenever in its judgment the best interests of PASS would be served thereby. Notwithstanding the foregoing, the authority of any Director to act as in an official capacity as a Director or Officer of PASS may be suspended by the Board of Directors for cause. Cause for suspension or removal of a Director shall include but not be limited to failure to meet any Board-approved performance expectations or the presence of a reason for suspension or dismissal as listed in Addendum B of these Bylaws. The first paragraph is updated and the second and third are unchanged (except cleaning up language).  If you scroll down and look at Addendum B of these bylaws you find the following: Cause for suspension or dismissal of a member of the Board of Directors may include: Inability to attend Board meetings on a regular basis. Inability or unwillingness to act in a capacity designated by the Board of Directors. Failure to fulfill the responsibilities of the office. Inability to represent the Region elected to represent Failure to act in a manner consistent with PASS's Bylaws and/or policies. Misrepresentation of responsibility and/or authority. Misrepresentation of PASS. Unresolved conflict of interests with Board responsibilities. Breach of confidentiality. The bold line about your inability to represent your region is what we added to the bylaws in this revision.  We also added a clause to section VII.3 allowing the Board to remove an officer.  That clause is much less restrictive.  It doesn’t require cause and only requires a simple majority. The Board of Directors may remove any Officer whenever in their judgment the best interests of PASS shall be served by such removal. Other There are numerous other small changes throughout the document. Proxy voting.  The laws around how members and Board members proxy votes are specific in Illinois law.  PASS is an Illinois corporation and is subject to Illinois laws.  We changed section IV.5 to come into compliance with those laws.  Specifically this says you can only vote through a proxy if you have a written proxy through your authorized attorney.  English language proficiency.  As we increase our global footprint we come across more members that aren’t native English speakers.  The business of PASS is conducted in English and it’s important that our Board members speak English.  If we get big enough to afford translators, we may be able to relax this but right now we need English language skills for effective Board members. Committees.  The language around committees in section IX is old and dated.  Our lawyers advised us to clean it up.  This section specifically applies to any committees that the Board may form outside of portfolios.  We removed the term limits, quorum and vacancies clause.  We don’t currently have any committees that this would apply to.  The Nominating Committee is covered elsewhere in the bylaws. Electronic Votes.  The change allows the Board to vote via email but the results must be unanimous.  This is to conform with Illinois state law. Immediate Past President.  There was no mechanism to fill the IPP role if an outgoing President chose not to participate.  We changed section VII.8 to allow the Board to invite any previous President to fill the role by majority vote. Nominations Committee.  We’ve opened the language to allow for the transparent election of the Nominations Committee as outlined by the 2011 Election Review Committee. Revocation of Charters. The language surrounding the revocation of charters for local groups was flagged by the lawyers. We have allowed for the local user group to make all necessary payment before considering returning of items to PASS if required. Bylaw notification. We’ve spent countless meetings working on these bylaws with the intent to not open them again any time in the near future. Should the bylaws be opened again, we have included a clause ensuring that the PASS membership is involved. I’m proud that the Board has remained committed to transparency and accountability to members. This clause will require that same level of commitment in the future even when all the current Board members have rolled off. I think that covers everything.  I’d encourage you to look through the red-line document and see the changes.  It’s helpful to look at the language that’s being removed and the language that’s being added.  I’m happy to answer any questions here or you can email them to [email protected].

    Read the article

  • migrating webclient to WCF; WCF client serializes parametername of method

    - by Wouter
    I'm struggling with migrating from webservice/webclient architecture to WCF architecture. The object are very complex, with lots of nested xsd's and different namespaces. Proxy classes are generated by adding a Web Reference to an original wsdl with 30+ webmethods and using xsd.exe for generating the missing SOAPFault objects. My pilot WCF Service consists of only 1 webmethod which matches the exact syntax of one of the original methods: 1 object as parameter, returning 1 other object as result value. I greated a WCF Interface using those proxy classes, using attributes: XMLSerializerFormat and ServiceContract on the interface, OperationContract on one method from original wsdl specifying Action, ReplyAction, all with the proper namespaces. I create incoming client messages using SoapUI; I generated a project from the original WSDL files (causing the SoapUI project to have 30+ methods) and created one new Request at the one implemented WebMethod, changed the url to my wcf webservice and send the message. Because of the specified (Reply-)Action in the OperationContractAttribute, the message is actually received and properly deserialized into an object. To get this far (40 hours of googling), a lot of frustration led me to using a custom endpoint in which the WCF 'wrapped tags' are removed, the namespaces for nested types are corrected, and the generated wsdl get's flattened (for better compatibility with other tools then MS VisualStudio). Interface code is this: [XmlSerializerFormat(Use = OperationFormatUse.Literal, Style = OperationFormatStyle.Document, SupportFaults = true)] [ServiceContract(Namespace = Constants.NamespaceStufZKN)] public interface IOntvangAsynchroon { [OperationContract(Action = Constants.NamespaceStufZKN + "/zakLk01", ReplyAction = Constants.NamespaceStufZKN + "/zakLk01", Name = "zakLk01")] [FaultContract(typeof(Fo03Bericht), Namespace = Constants.NamespaceStuf)] Bv03Bericht zakLk01([XmlElement("zakLk01", Namespace = Constants.NamespaceStufZKN)] ZAKLk01 zakLk011); When I use a Webclient in code to send a message, everything works. My problem is, when I use a WCF client. I use ChannelFactory< IOntvangAsynchroon to send a message. But the generated xml looks different: it includes the parametername of the method! It took me a lot of time to figure this one out, but here's what happens: Correct xml (stripped soap envelope): <soap:Body> <zakLk01 xmlns="http://www.egem.nl/StUF/sector/zkn/0310"> <stuurgegevens> <berichtcode xmlns="http://www.egem.nl/StUF/StUF0301">Bv01</berichtcode> <zender xmlns="http://www.egem.nl/StUF/StUF0301"> <applicatie>ONBEKEND</applicatie> </zender> </stuurgegevens> <parameters> </parameters> </zakLk01> </soap:Body> Bad xml: <soap:Body> <zakLk01 xmlns="http://www.egem.nl/StUF/sector/zkn/0310"> <zakLk011> <stuurgegevens> <berichtcode xmlns="http://www.egem.nl/StUF/StUF0301">Bv01</berichtcode> <zender xmlns="http://www.egem.nl/StUF/StUF0301"> <applicatie>ONBEKEND</applicatie> </zender> </stuurgegevens> <parameters> </parameters> </zakLk011> </zakLk01> </soap:Body> Notice the 'zakLk011' element? It is the name of the parameter of the method in my interface! So NOW it is zakLk011, but it when my parameter name was 'zakLk01', the xml seemed to contain some magical duplicate of the tag above, but without namespace. Of course, you can imagine me going crazy over what was happening before finding out it was the parametername! I know have actually created a WCF Service, at which I cannot send messages using a WCF Client anymore. For clarity: The method does get invoked using the WCF Client on my webservice, but the parameter object is empty. Because I'm using a custom endpoint to log the incoming xml, I can see the message is received fine, but just with the wrong syntax! WCF client code: ZAKLk01 stufbericht = MessageFactory.CreateZAKLk01(); ChannelFactory<IOntvangAsynchroon> factory = new ChannelFactory<IOntvangAsynchroon>(new BasicHttpBinding(), new EndpointAddress("http://localhost:8193/Roxit/Link/zkn0310")); factory.Endpoint.Behaviors.Add(new LinkEndpointBehavior()); IOntvangAsynchroon client = factory.CreateChannel(); client.zakLk01(stufbericht); I am not using a generated client, i just reference the webservice like i am lot's of times. Can anyone please help me? I can't google anything on this...

    Read the article

  • Drupal: Create custom search

    - by Dr. Hfuhruhurr
    I'm trying to create a custom search but getting stuck. What I want is to have a dropdownbox so the user can choose where to search in. These options can mean 1 or more content types. So if he chooses options A, then the search will look in node-type P,Q,R. But he may not give those results, but only the uid's which will be then themed to gather specific data for that user. To make it a little bit clearer, Suppose I want to llok for people. The what I'm searching in is 2 content profile types. But ofcourse you dont want to display those as a result, but a nice picture of the user and some data. I started with creating a form with a textfield and the dropdown box. Then, in the submit handler, i created the keys and redirected to another pages with those keys as a tail. This page has been defined in the menu hook, just like how search does it. After that I want to call hook_view to do the actual search by calling node_search, and give back the results. Unfortunately, it goes wrong. When i click the Search button, it gives me a 404. But am I on the right track? Is this the way to create a custom search? Thx for your help. Here's the code for some clarity: <?php // $Id$ /* * @file * Searches on Project, Person, Portfolio or Group. */ /** * returns an array of menu items * @return array of menu items */ function vm_search_menu() { $subjects = _vm_search_get_subjects(); foreach ($subjects as $name => $description) { $items['zoek/'. $name .'/%menu_tail'] = array( 'page callback' => 'vm_search_view', 'page arguments' => array($name), 'type' => MENU_LOCAL_TASK, ); } return $items; } /** * create a block to put the form into. * @param $op * @param $delta * @param $edit * @return mixed */ function vm_search_block($op = 'list', $delta = 0, $edit = array()) { switch ($op) { case 'list': $blocks[0]['info'] = t('Algemene zoek'); return $blocks; case 'view': if (0 == $delta) { $block['subject'] = t(''); $block['content'] = drupal_get_form('vm_search_general_form'); } return $block; } } /** * Define the form. */ function vm_search_general_form() { $subjects = _vm_search_get_subjects(); foreach ($subjects as $key => $subject) { $options[$key] = $subject['desc']; } $form['subjects'] = array( '#type' => 'select', '#options' => $options, '#required' => TRUE, ); $form['keys'] = array( '#type' => 'textfield', '#required' => TRUE, ); $form['submit'] = array( '#type' => 'submit', '#value' => t('Zoek'), ); return $form; } function vm_search_general_form_submit($form, &$form_state) { $subjects = _vm_search_get_subjects(); $keys = $form_state['values']['keys']; //the search keys //the content types to search in $keys .= ' type:' . implode(',', $subjects[$form_state['values']['subjects']]['types']); //redirect to the page, where vm_search_view will handle the actual search $form_state['redirect'] = 'zoek/'. $form_state['values']['subjects'] .'/'. $keys; } /** * Menu callback; presents the search results. */ function vm_search_view($type = 'node') { // Search form submits with POST but redirects to GET. This way we can keep // the search query URL clean as a whistle: // search/type/keyword+keyword if (!isset($_POST['form_id'])) { if ($type == '') { // Note: search/node can not be a default tab because it would take on the // path of its parent (search). It would prevent remembering keywords when // switching tabs. This is why we drupal_goto to it from the parent instead. drupal_goto($front_page); } $keys = search_get_keys(); // Only perform search if there is non-whitespace search term: $results = ''; if (trim($keys)) { // Log the search keys: watchdog('vm_search', '%keys (@type).', array('%keys' => $keys, '@type' => $type)); // Collect the search results: $results = node_search('search', $type); if ($results) { $results = theme('box', t('Zoek resultaten'), $results); } else { $results = theme('box', t('Je zoek heeft geen resultaten opgeleverd.')); } } } return $results; } /** * returns array where to look for * @return array */ function _vm_search_get_subjects() { $subjects['opdracht'] = array('desc' => t('Opdracht'), 'types' => array('project') ); $subjects['persoon'] = array('desc' => t('Persoon'), 'types' => array('types_specialisatie', 'smaak_en_interesses') ); $subjects['groep'] = array('desc' => t('Groep'), 'types' => array('Villamedia_groep') ); $subjects['portfolio'] = array('desc' => t('Portfolio'), 'types' => array('artikel') ); return $subjects; }

    Read the article

  • Drawing lines between views in a TableLayout

    - by RiThBo
    Firstly - sorry if you saw my other question which I deleted. My question was flawed. Here is a better version If I have two views, how do I draw a (straight) line between them when one of them is touched? The line needs to be dynamic so it can follow the finger until it reaches the second view where it "locks on". So, when view1 is touched a straight line is drawn which then follows the finger until it reaches view2. I created a LineView class that extends view, but I don't how to proceed. I read some tutorials but none show how to do this. I think I need to get the coordinates of both view, and then create a path which "updates" on MotionEvent. I can get the coordinates and the ids of the views I want to draw a line between, but the line that I try to draw between them either goes above it, or the line does not reach past the width and height of the view. Any advice/code/clarity would be much appreciated! Here is some code: My layout. I want to draw a line between two views contained in theTableLayout.# <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/activity_game_relative_layout" android:layout_width="match_parent" android:layout_height="match_parent" android:orientation="vertical" > <TableLayout android:layout_marginTop="35dp" android:layout_marginBottom="35dp" android:id="@+id/tableLayout1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerInParent="true" > <TableRow android:id="@+id/table_row_1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:padding="5dip" > <com.example.view.DotView android:id="@+id/game_dot_1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:layout_marginLeft="10dp" android:layout_marginRight="10dp" android:layout_marginTop="10dp" /> <com.example.view.DotView android:id="@+id/game_dot_2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:layout_marginLeft="10dp" android:layout_marginRight="10dp" android:layout_marginTop="10dp" /> <com.example.view.DotView android:id="@+id/game_dot_3" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:layout_marginLeft="10dp" android:layout_marginRight="10dp" android:layout_marginTop="10dp" /> </TableRow> <TableRow android:id="@+id/table_row_2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:padding="5dip" > <com.example.view.DotView android:id="@+id/game_dot_7" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:layout_marginLeft="10dp" android:layout_marginRight="10dp" android:layout_marginTop="10dp" /> <com.example.view.DotView android:id="@+id/game_dot_8" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:layout_marginLeft="10dp" android:layout_marginRight="10dp" android:layout_marginTop="10dp" /> <com.example.dotte.DotView android:id="@+id/game_dot_9" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginBottom="10dp" android:layout_marginLeft="10dp" android:layout_marginRight="10dp" android:layout_marginTop="10dp" /> </TableRow> </TableLayout> </RelativeLayout> This is my LineView class. I use this to try and draw the actual line between the points. public class LineView extends View { Paint paint = new Paint(); float startingX, startingY, endingX, endingY; public LineView(Context context) { super(context); // TODO Auto-generated constructor stub paint.setColor(Color.BLACK); paint.setStrokeWidth(10); } public void setPoints(float startX, float startY, float endX, float endY) { startingX = startX; startingY = startY; endingX = endX; endingY = endY; invalidate(); } @Override public void onDraw(Canvas canvas) { canvas.drawLine(startingX, startingY, endingX, endingY, paint); } } And this is my Activity. public class Game extends Activity { DotView dv1, dv2, dv3, dv4, dv5, dv6, dv7; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_game); getWindow().getDecorView().setSystemUiVisibility( View.SYSTEM_UI_FLAG_LOW_PROFILE); findDotIds(); RelativeLayout rl = (RelativeLayout) findViewById(R.id.activity_game_relative_layout); LineView lv = new LineView(this); lv.setPoints(dv1.getLeft(), dv1.getTop(), dv7.getLeft(), dv7.getTop()); rl.addView(lv); // TODO: Get the coordinates of all the dots in the TableLayout. Use view tree observer. } private void findDotIds() { // TODO Auto-generated method stub dv1 = (DotView) findViewById(R.id.game_dot_1); dv2 = (DotView) findViewById(R.id.game_dot_2); dv3 = (DotView) findViewById(R.id.game_dot_3); dv4 = (DotView) findViewById(R.id.game_dot_4); dv5 = (DotView) findViewById(R.id.game_dot_5); dv6 = (DotView) findViewById(R.id.game_dot_6); dv7 = (DotView) findViewById(R.id.game_dot_7); } } The views I want to draw lines between are in the TableLayout.

    Read the article

  • MVVM - implementing 'IsDirty' functionality to a ModelView in order to save data

    - by Brendan
    Hi, Being new to WPF & MVVM I struggling with some basic functionality. Let me first explain what I am after, and then attach some example code... I have a screen showing a list of users, and I display the details of the selected user on the right-hand side with editable textboxes. I then have a Save button which is DataBound, but I would only like this button to display when data has actually changed. ie - I need to check for "dirty data". I have a fully MVVM example in which I have a Model called User: namespace Test.Model { class User { public string UserName { get; set; } public string Surname { get; set; } public string Firstname { get; set; } } } Then, the ViewModel looks like this: using System.Collections.ObjectModel; using System.Collections.Specialized; using System.Windows.Input; using Test.Model; namespace Test.ViewModel { class UserViewModel : ViewModelBase { //Private variables private ObservableCollection<User> _users; RelayCommand _userSave; //Properties public ObservableCollection<User> User { get { if (_users == null) { _users = new ObservableCollection<User>(); //I assume I need this Handler, but I am stuggling to implement it successfully //_users.CollectionChanged += HandleChange; //Populate with users _users.Add(new User {UserName = "Bob", Firstname="Bob", Surname="Smith"}); _users.Add(new User {UserName = "Smob", Firstname="John", Surname="Davy"}); } return _users; } } //Not sure what to do with this?!?! //private void HandleChange(object sender, NotifyCollectionChangedEventArgs e) //{ // if (e.Action == NotifyCollectionChangedAction.Remove) // { // foreach (TestViewModel item in e.NewItems) // { // //Removed items // } // } // else if (e.Action == NotifyCollectionChangedAction.Add) // { // foreach (TestViewModel item in e.NewItems) // { // //Added items // } // } //} //Commands public ICommand UserSave { get { if (_userSave == null) { _userSave = new RelayCommand(param => this.UserSaveExecute(), param => this.UserSaveCanExecute); } return _userSave; } } void UserSaveExecute() { //Here I will call my DataAccess to actually save the data } bool UserSaveCanExecute { get { //This is where I would like to know whether the currently selected item has been edited and is thus "dirty" return false; } } //constructor public UserViewModel() { } } } The "RelayCommand" is just a simple wrapper class, as is the "ViewModelBase". (I'll attach the latter though just for clarity) using System; using System.ComponentModel; namespace Test.ViewModel { public abstract class ViewModelBase : INotifyPropertyChanged, IDisposable { protected ViewModelBase() { } public event PropertyChangedEventHandler PropertyChanged; protected virtual void OnPropertyChanged(string propertyName) { PropertyChangedEventHandler handler = this.PropertyChanged; if (handler != null) { var e = new PropertyChangedEventArgs(propertyName); handler(this, e); } } public void Dispose() { this.OnDispose(); } protected virtual void OnDispose() { } } } Finally - the XAML <Window x:Class="Test.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:Test.ViewModel" Title="MainWindow" Height="350" Width="525"> <Window.DataContext> <vm:UserViewModel/> </Window.DataContext> <Grid> <ListBox Height="238" HorizontalAlignment="Left" Margin="12,12,0,0" Name="listBox1" VerticalAlignment="Top" Width="197" ItemsSource="{Binding Path=User}" IsSynchronizedWithCurrentItem="True"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel> <TextBlock Text="{Binding Path=Firstname}"/> <TextBlock Text="{Binding Path=Surname}"/> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> <Label Content="Username" Height="28" HorizontalAlignment="Left" Margin="232,16,0,0" Name="label1" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,21,0,0" Name="textBox1" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/UserName}" /> <Label Content="Surname" Height="28" HorizontalAlignment="Left" Margin="232,50,0,0" Name="label2" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,52,0,0" Name="textBox2" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/Surname}" /> <Label Content="Firstname" Height="28" HorizontalAlignment="Left" Margin="232,84,0,0" Name="label3" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,86,0,0" Name="textBox3" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/Firstname}" /> <Button Content="Button" Height="23" HorizontalAlignment="Left" Margin="368,159,0,0" Name="button1" VerticalAlignment="Top" Width="75" Command="{Binding Path=UserSave}" /> </Grid> </Window> So basically, when I edit a surname, the Save button should be enabled; and if I undo my edit - well then it should be Disabled again as nothing has changed. I have seen this in many examples, but have not yet found out how to do it. Any help would be much appreciated! Brendan

    Read the article

  • Repeating Group Messages in Quickfix C++

    - by Mark Jackson
    We cannot seem to process some group messages with QuickFix. I am trying to set up a connection with the ICE exchange using QuickFix (C++). I have created a custom data dictionary to handle ICE's non-standard messages. The first message to handle is a SecurityDefinition. The message contains about 13000 entries broken into blocks of 100. I attached the message below (the first two entries with CR/LF added for clarity). My question is in the data dictionary, I defined a group as part of the entry with all the fields they specify in the group. Yet the message is rejected before it gets to the cracker as having an invalid tag (tag = 305). Message 2 Rejected: Tag not defined for this message type:305 Does this dictionary entry look correct. Is there any documentation anywhere on how to handle group messages? Dictionary entry <message name='SecurityDefinition' msgcat='app' msgtype='d'> <field name='SecurityResponseID' required='Y' /> <field name='SecurityResponseType' required='Y' /> <field name='SecurityReqID' required='Y' /> <field name='TotNoRelatedSym' required='N' /> <field name='NoRpts' required='N' /> <field name='ListSeqNo' required='N' /> <group name='NoUnderlyings' required='N'> <field name='UnderlyingSymbol' required='N' /> <field name='UnderlyingSecurityID' required='N' /> <field name='UnderlyingSecurityIDSource' required='N' /> <field name='UnderlyingCFICode' required='N' /> <field name='UnderlyingSecurityDesc' required='N' /> <field name='UnderlyingMaturityDate' required='N' /> <field name='UnderlyingContractMultiplier' required='N' /> <field name='IncrementPrice' required='N' /> <field name='IncrementQty' required='N' /> <field name='LotSize' required='N' /> <field name='NumofCycles' required='N' /> <field name='LotSizeMultiplier' required='N' /> <field name='Clearable' required='N' /> <field name='StripId' required='N' /> <field name='StripType' required='N' /> <field name='StripName' required='N' /> <field name='HubId' required='N' /> <field name='HubName' required='N' /> <field name='HubAlias' required='N' /> <field name='UnderlyingUnitOfMeasure' required='N' /> <field name='PriceDenomination' required='N' /> <field name='PriceUnit' required='N' /> <field name='Granularity' required='N' /> <field name='NumOfDecimalPrice' required='N' /> <field name='NumOfDecimalQty' required='N' /> <field name='ProductId' required='N' /> <field name='ProductName' required='N' /> <field name='ProductDescription' required='N' /> <field name='TickValue' required='N' /> <field name='ImpliedType' required='N' /> <field name='PrimaryLegSymbol' required='N' /> <field name='SecondaryLegSymbol' required='N' /> <field name='IncrementStrike' required='N' /> <field name='MinStrike' required='N' /> <field name='MaxStrike' required='N' /> </group> </message> The actual message is 8=FIX.4.49=5004335=d49=ICE34=252=20121017-00:39:41.38556=600357=23322=3924323=4320=1393=1310382=13267=1711=100 311=1705282309=TEB SMG0013-TFL SMG0013305=8463=FXXXXX307=NG Basis Futures Spr - TETCO-ELA/TGP-500L - Feb13542=20130131436=1.09013=0.00059014=2500.09017=25009022=289024=19025=Y916=20130201917=201302289201=11969200=129202=Feb139300=60589301=Texas Eastern Transmission Corp. - East Louisiana Zone/Tennessee Gas Pipeline Co. - Zone L, 500 Leg Pool9302=TETCO-ELA/TGP-500L998=MMBtus9100=USD9101=USD / MMBtu9085=daily9083=49084=09061=4909062=NG Basis Futures Spr9063=Natural Gas Basis Futures Spread9032=1.259004=17051939005=1353778 311=1714677309=PGE SQF0014.H0014-SCB SQF0014.H0014305=8463=FXXXXX307=NG Basis Futures Spr - PG&E-Citygate/Socal-Citygate - Q1 14542=20131231436=1.09013=0.00059014=2500.09017=25009022=909024=19025=Y916=20140101917=201403319201=12339200=159202=Q1 149300=59979301=PG&E - Citygate/Socal - Citygate9302=PG&E-Citygate/Socal-Citygate998=MMBtus9100=USD9101=USD / MMBtu9085=daily9083=49084=09061=4909062=NG Basis Futures Spr9063=Natural Gas Basis Futures Spread9032=1.259004=13430529005=1344660

    Read the article

  • How to determine whether a class has a particular templated member function?

    - by Aozine
    I was wondering if it's possible to extend the SFINAE approach to detecting whether a class has a certain member function (as discussed here: "Is there a Technique in C++ to know if a class has a member function of a given signature?" http://stackoverflow.com/questions/87372/is-there-a-technique-in-c-to-know-if-a-class-has-a-member-function-of-a-given-s ) to support templated member functions? E.g. to be able to detect the function foo in the following class: struct some_class { template < int _n > void foo() { } }; I thought it might be possible to do this for a particular instantiation of foo, (e.g. check to see if void foo< 5 >() is a member) as follows: template < typename _class, int _n > class foo_int_checker { template < typename _t, void (_t::*)() > struct sfinae { }; template < typename _t > static big test( sfinae< _t, &_t::foo< _n > > * ); template < typename _t > static small test( ... ); public: enum { value = sizeof( test< _class >( 0 ) ) == sizeof( big ) }; }; Then do foo_int_checker< some_class, 5 >::value to check whether some_class has the member void foo< 5 >(). However on MSVC++ 2008 this always returns false while g++ gives the following syntax errors at the line test( sfinae< _t, &_t::foo< _n > > ); test.cpp:24: error: missing `>' to terminate the template argument list test.cpp:24: error: template argument 2 is invalid test.cpp:24: error: expected unqualified-id before '<' token test.cpp:24: error: expected `,' or `...' before '<' token test.cpp:24: error: ISO C++ forbids declaration of `parameter' with no type Both seem to fail because I'm trying to get the address of a template function instantiation from a type that is itself a template parameter. Does anyone know whether this is possible or if it's disallowed by the standard for some reason? EDIT: It seems that I missed out the ::template syntax to get g++ to compile the above code correctly. If I change the bit where I get the address of the function to &_t::template foo< _n > then the program compiles, but I get the same behaviour as MSVC++ (value is always set to false). If I comment out the ... overload of test to force the compiler to pick the other one, I get the following compiler error in g++: test.cpp: In instantiation of `foo_int_checker<A, 5>': test.cpp:40: instantiated from here test.cpp:32: error: invalid use of undefined type `class foo_int_checker<A, 5>' test.cpp:17: error: declaration of `class foo_int_checker<A, 5>' test.cpp:32: error: enumerator value for `value' not integer constant where line 32 is the enum { value = sizeof( test< _class >( 0 ) ) == sizeof( big ) }; line. Unfortunately this doesn't seem to help me diagnose the problem :(. MSVC++ gives a similar nondescript error: error C2770: invalid explicit template argument(s) for 'clarity::meta::big checker<_checked_type>::test(checker<_checked_type>::sfinae<_t,&_t::template foo<5>> *)' on the same line. What's strange is that if I get the address from a specific class and not a template parameter (i.e. rather than &_t::template foo< _n > I do &some_class::template foo< _n >) then I get the correct result, but then my checker class is limited to checking a single class (some_class) for the function. Also, if I do the following: template < typename _t, void (_t::*_f)() > void f0() { } template < typename _t > void f1() { f0< _t, &_t::template foo< 5 > >(); } and call f1< some_class >() then I DON'T get a compile error on &_t::template foo< 5 >. This suggests that the problem only arises when getting the address of a templated member function from a type that is itself a template parameter while in a SFINAE context. Argh!

    Read the article

  • Inconsistent results in R with RNetCDF - why?

    - by sarcozona
    I am having trouble extracting data from NetCDF data files using RNetCDF. The data files each have 3 dimensions (longitude, latitude, and a date) and 3 variables (latitude, longitude, and a climate variable). There are four datasets, each with a different climate variable. Here is some of the output from print.nc(p8m.tmax) for clarity. The other datasets are identical except for the specific climate variable. dimensions: month = UNLIMITED ; // (1368 currently) lat = 3105 ; lon = 7025 ; variables: float lat(lat) ; lat:long_name = "latitude" ; lat:standard_name = "latitude" ; lat:units = "degrees_north" ; float lon(lon) ; lon:long_name = "longitude" ; lon:standard_name = "longitude" ; lon:units = "degrees_east" ; short tmax(lon, lat, month) ; tmax:missing_value = -9999 ; tmax:_FillValue = -9999 ; tmax:units = "degree_celsius" ; tmax:scale_factor = 0.01 ; tmax:valid_min = -5000 ; tmax:valid_max = 6000 ; I am getting behavior I don't understand when I use the var.get.nc function from the RNetCDF package. For example, when I attempt to extract 82 values beginning at stval from the maximum temperature data (p8m.tmax <- open.nc(tmaxdataset.nc)) with > var.get.nc(p8m.tmax,'tmax', start=c(lon_val, lat_val, stval),count=c(1,1,82)) (where lon_val and lat_val specify the location in the dataset of the coordinates I'm interested in and stval is stval is set to which(time_vec==200201), which in this case equaled 1285.) I get Error: Invalid argument But after successfully extracting 80 and 81 values > var.get.nc(p8m.tmax,'tmax', start=c(lon_val, lat_val, stval),count=c(1,1,80)) > var.get.nc(p8m.tmax,'tmax', start=c(lon_val, lat_val, stval),count=c(1,1,81)) the command with 82 works: > var.get.nc(p8m.tmax,'tmax', start=c(lon_val, lat_val, stval),count=c(1,1,82)) [1] 444 866 1063 ... [output snipped] The same problem occurs in the identically structured tmin file, but at 36 instead of 82: > var.get.nc(p8m.tmin,'tmin', start=c(lon_val, lat_val, stval),count=c(1,1,36)) produces Error: Invalid argument But after repeating with counts of 30, 31, etc > var.get.nc(p8m.tmin,'tmin', start=c(lon_val, lat_val, stval), count=c(1,1,36)) works. These examples make it seem like the function is failing at the last count, but that actually isn't the case. In the first example, var.get.nc gave Error: Invalid argument after I asked for 84 values. I then narrowed the failure down to the 82nd count by varying the starting point in the dataset and asking for only 1 value at a time. The particular number the problem occurs at also varies. I can close and reopen the dataset and have the problem occur at a different location. In the particular examples above, lon_val and lat_val are 1595 and 1751, respectively, identifying the location in the dataset along the lat and lon dimensions for the latitude and longitude I'm interested in. The 1595th latitude and 1751th longitude are not the problem, however. The problem occurs with all other latitude and longitudes I've tried. Varying the starting location in the dataset along the climate variable dimension (stval) and/or specifying it different (as a number in the command instead of the object stval) also does not fix the problem. This problem doesn't always occur. I can run identical code three times in a row (clearing all objects in between runs) and get a different outcome each time. The first run may choke on the 7th entry I'm trying to get, the second might work fine, and the third run might choke on the 83rd entry. I'm absolutely baffled by such inconsistent behavior. The open.nc function has also started to fail with the same Error: Invalid argument. Like the var.get.nc problems, it also occurs inconsistently. Does anyone know what causes the initial failure to extract the variable? And how I might prevent it? Could have to do with the size of the data files (~60GB each) and/or the fact that I'm accessing them through networked drives? This was also asked here: https://stat.ethz.ch/pipermail/r-help/2011-June/281233.html > sessionInfo() R version 2.13.0 (2011-04-13) Platform: i386-pc-mingw32/i386 (32-bit) locale: [1] LC_COLLATE=English_United States.1252 LC_CTYPE=English_United States.1252 [3] LC_MONETARY=English_United States.1252 LC_NUMERIC=C [5] LC_TIME=English_United States.1252 attached base packages: [1] stats graphics grDevices utils datasets methods base other attached packages: [1] reshape_0.8.4 plyr_1.5.2 RNetCDF_1.5.2-2 loaded via a namespace (and not attached): [1] tools_2.13.0

    Read the article

  • Creating a dynamic, extensible C# Expando Object

    - by Rick Strahl
    I love dynamic functionality in a strongly typed language because it offers us the best of both worlds. In C# (or any of the main .NET languages) we now have the dynamic type that provides a host of dynamic features for the static C# language. One place where I've found dynamic to be incredibly useful is in building extensible types or types that expose traditionally non-object data (like dictionaries) in easier to use and more readable syntax. I wrote about a couple of these for accessing old school ADO.NET DataRows and DataReaders more easily for example. These classes are dynamic wrappers that provide easier syntax and auto-type conversions which greatly simplifies code clutter and increases clarity in existing code. ExpandoObject in .NET 4.0 Another great use case for dynamic objects is the ability to create extensible objects - objects that start out with a set of static members and then can add additional properties and even methods dynamically. The .NET 4.0 framework actually includes an ExpandoObject class which provides a very dynamic object that allows you to add properties and methods on the fly and then access them again. For example with ExpandoObject you can do stuff like this:dynamic expand = new ExpandoObject(); expand.Name = "Rick"; expand.HelloWorld = (Func<string, string>) ((string name) => { return "Hello " + name; }); Console.WriteLine(expand.Name); Console.WriteLine(expand.HelloWorld("Dufus")); Internally ExpandoObject uses a Dictionary like structure and interface to store properties and methods and then allows you to add and access properties and methods easily. As cool as ExpandoObject is it has a few shortcomings too: It's a sealed type so you can't use it as a base class It only works off 'properties' in the internal Dictionary - you can't expose existing type data It doesn't serialize to XML or with DataContractSerializer/DataContractJsonSerializer Expando - A truly extensible Object ExpandoObject is nice if you just need a dynamic container for a dictionary like structure. However, if you want to build an extensible object that starts out with a set of strongly typed properties and then allows you to extend it, ExpandoObject does not work because it's a sealed class that can't be inherited. I started thinking about this very scenario for one of my applications I'm building for a customer. In this system we are connecting to various different user stores. Each user store has the same basic requirements for username, password, name etc. But then each store also has a number of extended properties that is available to each application. In the real world scenario the data is loaded from the database in a data reader and the known properties are assigned from the known fields in the database. All unknown fields are then 'added' to the expando object dynamically. In the past I've done this very thing with a separate property - Properties - just like I do for this class. But the property and dictionary syntax is not ideal and tedious to work with. I started thinking about how to represent these extra property structures. One way certainly would be to add a Dictionary, or an ExpandoObject to hold all those extra properties. But wouldn't it be nice if the application could actually extend an existing object that looks something like this as you can with the Expando object:public class User : Westwind.Utilities.Dynamic.Expando { public string Email { get; set; } public string Password { get; set; } public string Name { get; set; } public bool Active { get; set; } public DateTime? ExpiresOn { get; set; } } and then simply start extending the properties of this object dynamically? Using the Expando object I describe later you can now do the following:[TestMethod] public void UserExampleTest() { var user = new User(); // Set strongly typed properties user.Email = "[email protected]"; user.Password = "nonya123"; user.Name = "Rickochet"; user.Active = true; // Now add dynamic properties dynamic duser = user; duser.Entered = DateTime.Now; duser.Accesses = 1; // you can also add dynamic props via indexer user["NickName"] = "AntiSocialX"; duser["WebSite"] = "http://www.west-wind.com/weblog"; // Access strong type through dynamic ref Assert.AreEqual(user.Name,duser.Name); // Access strong type through indexer Assert.AreEqual(user.Password,user["Password"]); // access dyanmically added value through indexer Assert.AreEqual(duser.Entered,user["Entered"]); // access index added value through dynamic Assert.AreEqual(user["NickName"],duser.NickName); // loop through all properties dynamic AND strong type properties (true) foreach (var prop in user.GetProperties(true)) { object val = prop.Value; if (val == null) val = "null"; Console.WriteLine(prop.Key + ": " + val.ToString()); } } As you can see this code somewhat blurs the line between a static and dynamic type. You start with a strongly typed object that has a fixed set of properties. You can then cast the object to dynamic (as I discussed in my last post) and add additional properties to the object. You can also use an indexer to add dynamic properties to the object. To access the strongly typed properties you can use either the strongly typed instance, the indexer or the dynamic cast of the object. Personally I think it's kinda cool to have an easy way to access strongly typed properties by string which can make some data scenarios much easier. To access the 'dynamically added' properties you can use either the indexer on the strongly typed object, or property syntax on the dynamic cast. Using the dynamic type allows all three modes to work on both strongly typed and dynamic properties. Finally you can iterate over all properties, both dynamic and strongly typed if you chose. Lots of flexibility. Note also that by default the Expando object works against the (this) instance meaning it extends the current object. You can also pass in a separate instance to the constructor in which case that object will be used to iterate over to find properties rather than this. Using this approach provides some really interesting functionality when use the dynamic type. To use this we have to add an explicit constructor to the Expando subclass:public class User : Westwind.Utilities.Dynamic.Expando { public string Email { get; set; } public string Password { get; set; } public string Name { get; set; } public bool Active { get; set; } public DateTime? ExpiresOn { get; set; } public User() : base() { } // only required if you want to mix in seperate instance public User(object instance) : base(instance) { } } to allow the instance to be passed. When you do you can now do:[TestMethod] public void ExpandoMixinTest() { // have Expando work on Addresses var user = new User( new Address() ); // cast to dynamicAccessToPropertyTest dynamic duser = user; // Set strongly typed properties duser.Email = "[email protected]"; user.Password = "nonya123"; // Set properties on address object duser.Address = "32 Kaiea"; //duser.Phone = "808-123-2131"; // set dynamic properties duser.NonExistantProperty = "This works too"; // shows default value Address.Phone value Console.WriteLine(duser.Phone); } Using the dynamic cast in this case allows you to access *three* different 'objects': The strong type properties, the dynamically added properties in the dictionary and the properties of the instance passed in! Effectively this gives you a way to simulate multiple inheritance (which is scary - so be very careful with this, but you can do it). How Expando works Behind the scenes Expando is a DynamicObject subclass as I discussed in my last post. By implementing a few of DynamicObject's methods you can basically create a type that can trap 'property missing' and 'method missing' operations. When you access a non-existant property a known method is fired that our code can intercept and provide a value for. Internally Expando uses a custom dictionary implementation to hold the dynamic properties you might add to your expandable object. Let's look at code first. The code for the Expando type is straight forward and given what it provides relatively short. Here it is.using System; using System.Collections.Generic; using System.Linq; using System.Dynamic; using System.Reflection; namespace Westwind.Utilities.Dynamic { /// <summary> /// Class that provides extensible properties and methods. This /// dynamic object stores 'extra' properties in a dictionary or /// checks the actual properties of the instance. /// /// This means you can subclass this expando and retrieve either /// native properties or properties from values in the dictionary. /// /// This type allows you three ways to access its properties: /// /// Directly: any explicitly declared properties are accessible /// Dynamic: dynamic cast allows access to dictionary and native properties/methods /// Dictionary: Any of the extended properties are accessible via IDictionary interface /// </summary> [Serializable] public class Expando : DynamicObject, IDynamicMetaObjectProvider { /// <summary> /// Instance of object passed in /// </summary> object Instance; /// <summary> /// Cached type of the instance /// </summary> Type InstanceType; PropertyInfo[] InstancePropertyInfo { get { if (_InstancePropertyInfo == null && Instance != null) _InstancePropertyInfo = Instance.GetType().GetProperties(BindingFlags.Instance | BindingFlags.Public | BindingFlags.DeclaredOnly); return _InstancePropertyInfo; } } PropertyInfo[] _InstancePropertyInfo; /// <summary> /// String Dictionary that contains the extra dynamic values /// stored on this object/instance /// </summary> /// <remarks>Using PropertyBag to support XML Serialization of the dictionary</remarks> public PropertyBag Properties = new PropertyBag(); //public Dictionary<string,object> Properties = new Dictionary<string, object>(); /// <summary> /// This constructor just works off the internal dictionary and any /// public properties of this object. /// /// Note you can subclass Expando. /// </summary> public Expando() { Initialize(this); } /// <summary> /// Allows passing in an existing instance variable to 'extend'. /// </summary> /// <remarks> /// You can pass in null here if you don't want to /// check native properties and only check the Dictionary! /// </remarks> /// <param name="instance"></param> public Expando(object instance) { Initialize(instance); } protected virtual void Initialize(object instance) { Instance = instance; if (instance != null) InstanceType = instance.GetType(); } /// <summary> /// Try to retrieve a member by name first from instance properties /// followed by the collection entries. /// </summary> /// <param name="binder"></param> /// <param name="result"></param> /// <returns></returns> public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; // first check the Properties collection for member if (Properties.Keys.Contains(binder.Name)) { result = Properties[binder.Name]; return true; } // Next check for Public properties via Reflection if (Instance != null) { try { return GetProperty(Instance, binder.Name, out result); } catch { } } // failed to retrieve a property result = null; return false; } /// <summary> /// Property setter implementation tries to retrieve value from instance /// first then into this object /// </summary> /// <param name="binder"></param> /// <param name="value"></param> /// <returns></returns> public override bool TrySetMember(SetMemberBinder binder, object value) { // first check to see if there's a native property to set if (Instance != null) { try { bool result = SetProperty(Instance, binder.Name, value); if (result) return true; } catch { } } // no match - set or add to dictionary Properties[binder.Name] = value; return true; } /// <summary> /// Dynamic invocation method. Currently allows only for Reflection based /// operation (no ability to add methods dynamically). /// </summary> /// <param name="binder"></param> /// <param name="args"></param> /// <param name="result"></param> /// <returns></returns> public override bool TryInvokeMember(InvokeMemberBinder binder, object[] args, out object result) { if (Instance != null) { try { // check instance passed in for methods to invoke if (InvokeMethod(Instance, binder.Name, args, out result)) return true; } catch { } } result = null; return false; } /// <summary> /// Reflection Helper method to retrieve a property /// </summary> /// <param name="instance"></param> /// <param name="name"></param> /// <param name="result"></param> /// <returns></returns> protected bool GetProperty(object instance, string name, out object result) { if (instance == null) instance = this; var miArray = InstanceType.GetMember(name, BindingFlags.Public | BindingFlags.GetProperty | BindingFlags.Instance); if (miArray != null && miArray.Length > 0) { var mi = miArray[0]; if (mi.MemberType == MemberTypes.Property) { result = ((PropertyInfo)mi).GetValue(instance,null); return true; } } result = null; return false; } /// <summary> /// Reflection helper method to set a property value /// </summary> /// <param name="instance"></param> /// <param name="name"></param> /// <param name="value"></param> /// <returns></returns> protected bool SetProperty(object instance, string name, object value) { if (instance == null) instance = this; var miArray = InstanceType.GetMember(name, BindingFlags.Public | BindingFlags.SetProperty | BindingFlags.Instance); if (miArray != null && miArray.Length > 0) { var mi = miArray[0]; if (mi.MemberType == MemberTypes.Property) { ((PropertyInfo)mi).SetValue(Instance, value, null); return true; } } return false; } /// <summary> /// Reflection helper method to invoke a method /// </summary> /// <param name="instance"></param> /// <param name="name"></param> /// <param name="args"></param> /// <param name="result"></param> /// <returns></returns> protected bool InvokeMethod(object instance, string name, object[] args, out object result) { if (instance == null) instance = this; // Look at the instanceType var miArray = InstanceType.GetMember(name, BindingFlags.InvokeMethod | BindingFlags.Public | BindingFlags.Instance); if (miArray != null && miArray.Length > 0) { var mi = miArray[0] as MethodInfo; result = mi.Invoke(Instance, args); return true; } result = null; return false; } /// <summary> /// Convenience method that provides a string Indexer /// to the Properties collection AND the strongly typed /// properties of the object by name. /// /// // dynamic /// exp["Address"] = "112 nowhere lane"; /// // strong /// var name = exp["StronglyTypedProperty"] as string; /// </summary> /// <remarks> /// The getter checks the Properties dictionary first /// then looks in PropertyInfo for properties. /// The setter checks the instance properties before /// checking the Properties dictionary. /// </remarks> /// <param name="key"></param> /// /// <returns></returns> public object this[string key] { get { try { // try to get from properties collection first return Properties[key]; } catch (KeyNotFoundException ex) { // try reflection on instanceType object result = null; if (GetProperty(Instance, key, out result)) return result; // nope doesn't exist throw; } } set { if (Properties.ContainsKey(key)) { Properties[key] = value; return; } // check instance for existance of type first var miArray = InstanceType.GetMember(key, BindingFlags.Public | BindingFlags.GetProperty); if (miArray != null && miArray.Length > 0) SetProperty(Instance, key, value); else Properties[key] = value; } } /// <summary> /// Returns and the properties of /// </summary> /// <param name="includeProperties"></param> /// <returns></returns> public IEnumerable<KeyValuePair<string,object>> GetProperties(bool includeInstanceProperties = false) { if (includeInstanceProperties && Instance != null) { foreach (var prop in this.InstancePropertyInfo) yield return new KeyValuePair<string, object>(prop.Name, prop.GetValue(Instance, null)); } foreach (var key in this.Properties.Keys) yield return new KeyValuePair<string, object>(key, this.Properties[key]); } /// <summary> /// Checks whether a property exists in the Property collection /// or as a property on the instance /// </summary> /// <param name="item"></param> /// <returns></returns> public bool Contains(KeyValuePair<string, object> item, bool includeInstanceProperties = false) { bool res = Properties.ContainsKey(item.Key); if (res) return true; if (includeInstanceProperties && Instance != null) { foreach (var prop in this.InstancePropertyInfo) { if (prop.Name == item.Key) return true; } } return false; } } } Although the Expando class supports an indexer, it doesn't actually implement IDictionary or even IEnumerable. It only provides the indexer and Contains() and GetProperties() methods, that work against the Properties dictionary AND the internal instance. The reason for not implementing IDictionary is that a) it doesn't add much value since you can access the Properties dictionary directly and that b) I wanted to keep the interface to class very lean so that it can serve as an entity type if desired. Implementing these IDictionary (or even IEnumerable) causes LINQ extension methods to pop up on the type which obscures the property interface and would only confuse the purpose of the type. IDictionary and IEnumerable are also problematic for XML and JSON Serialization - the XML Serializer doesn't serialize IDictionary<string,object>, nor does the DataContractSerializer. The JavaScriptSerializer does serialize, but it treats the entire object like a dictionary and doesn't serialize the strongly typed properties of the type, only the dictionary values which is also not desirable. Hence the decision to stick with only implementing the indexer to support the user["CustomProperty"] functionality and leaving iteration functions to the publicly exposed Properties dictionary. Note that the Dictionary used here is a custom PropertyBag class I created to allow for serialization to work. One important aspect for my apps is that whatever custom properties get added they have to be accessible to AJAX clients since the particular app I'm working on is a SIngle Page Web app where most of the Web access is through JSON AJAX calls. PropertyBag can serialize to XML and one way serialize to JSON using the JavaScript serializer (not the DCS serializers though). The key components that make Expando work in this code are the Properties Dictionary and the TryGetMember() and TrySetMember() methods. The Properties collection is public so if you choose you can explicitly access the collection to get better performance or to manipulate the members in internal code (like loading up dynamic values form a database). Notice that TryGetMember() and TrySetMember() both work against the dictionary AND the internal instance to retrieve and set properties. This means that user["Name"] works against native properties of the object as does user["Name"] = "RogaDugDog". What's your Use Case? This is still an early prototype but I've plugged it into one of my customer's applications and so far it's working very well. The key features for me were the ability to easily extend the type with values coming from a database and exposing those values in a nice and easy to use manner. I'm also finding that using this type of object for ViewModels works very well to add custom properties to view models. I suspect there will be lots of uses for this - I've been using the extra dictionary approach to extensibility for years - using a dynamic type to make the syntax cleaner is just a bonus here. What can you think of to use this for? Resources Source Code and Tests (GitHub) Also integrated in Westwind.Utilities of the West Wind Web Toolkit West Wind Utilities NuGet© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  .NET  Dynamic Types   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Camera for 2.5D Game

    - by me--
    I'm hoping someone can explain this to me like I'm 5, because I've been struggling with this for hours and simply cannot understand what I'm doing wrong. I've written a Camera class for my 2.5D game. The intention is to support world and screen spaces like this: The camera is the black thing on the right. The +Z axis is upwards in that image, with -Z heading downwards. As you can see, both world space and screen space have (0, 0) at their top-left. I started writing some unit tests to prove that my camera was working as expected, and that's where things started getting...strange. My tests plot coordinates in world, view, and screen spaces. Eventually I will use image comparison to assert that they are correct, but for now my test just displays the result. The render logic uses Camera.ViewMatrix to transform world space to view space, and Camera.WorldPointToScreen to transform world space to screen space. Here is an example test: [Fact] public void foo() { var camera = new Camera(new Viewport(0, 0, 250, 100)); DrawingVisual worldRender; DrawingVisual viewRender; DrawingVisual screenRender; this.Render(camera, out worldRender, out viewRender, out screenRender, new Vector3(30, 0, 0), new Vector3(30, 40, 0)); this.ShowRenders(camera, worldRender, viewRender, screenRender); } And here's what pops up when I run this test: World space looks OK, although I suspect the z axis is going into the screen instead of towards the viewer. View space has me completely baffled. I was expecting the camera to be sitting above (0, 0) and looking towards the center of the scene. Instead, the z axis seems to be the wrong way around, and the camera is positioned in the opposite corner to what I expect! I suspect screen space will be another thing altogether, but can anyone explain what I'm doing wrong in my Camera class? UPDATE I made some progress in terms of getting things to look visually as I expect, but only through intuition: not an actual understanding of what I'm doing. Any enlightenment would be greatly appreciated. I realized that my view space was flipped both vertically and horizontally compared to what I expected, so I changed my view matrix to scale accordingly: this.viewMatrix = Matrix.CreateLookAt(this.location, this.target, this.up) * Matrix.CreateScale(this.zoom, this.zoom, 1) * Matrix.CreateScale(-1, -1, 1); I could combine the two CreateScale calls, but have left them separate for clarity. Again, I have no idea why this is necessary, but it fixed my view space: But now my screen space needs to be flipped vertically, so I modified my projection matrix accordingly: this.projectionMatrix = Matrix.CreatePerspectiveFieldOfView(0.7853982f, viewport.AspectRatio, 1, 2) * Matrix.CreateScale(1, -1, 1); And this results in what I was expecting from my first attempt: I have also just tried using Camera to render sprites via a SpriteBatch to make sure everything works there too, and it does. But the question remains: why do I need to do all this flipping of axes to get the space coordinates the way I expect? UPDATE 2 I've since improved my rendering logic in my test suite so that it supports geometries and so that lines get lighter the further away they are from the camera. I wanted to do this to avoid optical illusions and to further prove to myself that I'm looking at what I think I am. Here is an example: In this case, I have 3 geometries: a cube, a sphere, and a polyline on the top face of the cube. Notice how the darkening and lightening of the lines correctly identifies those portions of the geometries closer to the camera. If I remove the negative scaling I had to put in, I see: So you can see I'm still in the same boat - I still need those vertical and horizontal flips in my matrices to get things to appear correctly. In the interests of giving people a repro to play with, here is the complete code needed to generate the above. If you want to run via the test harness, just install the xunit package: Camera.cs: using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using System.Diagnostics; public sealed class Camera { private readonly Viewport viewport; private readonly Matrix projectionMatrix; private Matrix? viewMatrix; private Vector3 location; private Vector3 target; private Vector3 up; private float zoom; public Camera(Viewport viewport) { this.viewport = viewport; // for an explanation of the negative scaling, see: http://gamedev.stackexchange.com/questions/63409/ this.projectionMatrix = Matrix.CreatePerspectiveFieldOfView(0.7853982f, viewport.AspectRatio, 1, 2) * Matrix.CreateScale(1, -1, 1); // defaults this.location = new Vector3(this.viewport.Width / 2, this.viewport.Height, 100); this.target = new Vector3(this.viewport.Width / 2, this.viewport.Height / 2, 0); this.up = new Vector3(0, 0, 1); this.zoom = 1; } public Viewport Viewport { get { return this.viewport; } } public Vector3 Location { get { return this.location; } set { this.location = value; this.viewMatrix = null; } } public Vector3 Target { get { return this.target; } set { this.target = value; this.viewMatrix = null; } } public Vector3 Up { get { return this.up; } set { this.up = value; this.viewMatrix = null; } } public float Zoom { get { return this.zoom; } set { this.zoom = value; this.viewMatrix = null; } } public Matrix ProjectionMatrix { get { return this.projectionMatrix; } } public Matrix ViewMatrix { get { if (this.viewMatrix == null) { // for an explanation of the negative scaling, see: http://gamedev.stackexchange.com/questions/63409/ this.viewMatrix = Matrix.CreateLookAt(this.location, this.target, this.up) * Matrix.CreateScale(this.zoom) * Matrix.CreateScale(-1, -1, 1); } return this.viewMatrix.Value; } } public Vector2 WorldPointToScreen(Vector3 point) { var result = viewport.Project(point, this.ProjectionMatrix, this.ViewMatrix, Matrix.Identity); return new Vector2(result.X, result.Y); } public void WorldPointsToScreen(Vector3[] points, Vector2[] destination) { Debug.Assert(points != null); Debug.Assert(destination != null); Debug.Assert(points.Length == destination.Length); for (var i = 0; i < points.Length; ++i) { destination[i] = this.WorldPointToScreen(points[i]); } } } CameraFixture.cs: using Microsoft.Xna.Framework.Graphics; using System; using System.Collections.Generic; using System.Linq; using System.Windows; using System.Windows.Controls; using System.Windows.Media; using Xunit; using XNA = Microsoft.Xna.Framework; public sealed class CameraFixture { [Fact] public void foo() { var camera = new Camera(new Viewport(0, 0, 250, 100)); DrawingVisual worldRender; DrawingVisual viewRender; DrawingVisual screenRender; this.Render( camera, out worldRender, out viewRender, out screenRender, new Sphere(30, 15) { WorldMatrix = XNA.Matrix.CreateTranslation(155, 50, 0) }, new Cube(30) { WorldMatrix = XNA.Matrix.CreateTranslation(75, 60, 15) }, new PolyLine(new XNA.Vector3(0, 0, 0), new XNA.Vector3(10, 10, 0), new XNA.Vector3(20, 0, 0), new XNA.Vector3(0, 0, 0)) { WorldMatrix = XNA.Matrix.CreateTranslation(65, 55, 30) }); this.ShowRenders(worldRender, viewRender, screenRender); } #region Supporting Fields private static readonly Pen xAxisPen = new Pen(Brushes.Red, 2); private static readonly Pen yAxisPen = new Pen(Brushes.Green, 2); private static readonly Pen zAxisPen = new Pen(Brushes.Blue, 2); private static readonly Pen viewportPen = new Pen(Brushes.Gray, 1); private static readonly Pen nonScreenSpacePen = new Pen(Brushes.Black, 0.5); private static readonly Color geometryBaseColor = Colors.Black; #endregion #region Supporting Methods private void Render(Camera camera, out DrawingVisual worldRender, out DrawingVisual viewRender, out DrawingVisual screenRender, params Geometry[] geometries) { var worldDrawingVisual = new DrawingVisual(); var viewDrawingVisual = new DrawingVisual(); var screenDrawingVisual = new DrawingVisual(); const int axisLength = 15; using (var worldDrawingContext = worldDrawingVisual.RenderOpen()) using (var viewDrawingContext = viewDrawingVisual.RenderOpen()) using (var screenDrawingContext = screenDrawingVisual.RenderOpen()) { // draw lines around the camera's viewport var viewportBounds = camera.Viewport.Bounds; var viewportLines = new Tuple<int, int, int, int>[] { Tuple.Create(viewportBounds.Left, viewportBounds.Bottom, viewportBounds.Left, viewportBounds.Top), Tuple.Create(viewportBounds.Left, viewportBounds.Top, viewportBounds.Right, viewportBounds.Top), Tuple.Create(viewportBounds.Right, viewportBounds.Top, viewportBounds.Right, viewportBounds.Bottom), Tuple.Create(viewportBounds.Right, viewportBounds.Bottom, viewportBounds.Left, viewportBounds.Bottom) }; foreach (var viewportLine in viewportLines) { var viewStart = XNA.Vector3.Transform(new XNA.Vector3(viewportLine.Item1, viewportLine.Item2, 0), camera.ViewMatrix); var viewEnd = XNA.Vector3.Transform(new XNA.Vector3(viewportLine.Item3, viewportLine.Item4, 0), camera.ViewMatrix); var screenStart = camera.WorldPointToScreen(new XNA.Vector3(viewportLine.Item1, viewportLine.Item2, 0)); var screenEnd = camera.WorldPointToScreen(new XNA.Vector3(viewportLine.Item3, viewportLine.Item4, 0)); worldDrawingContext.DrawLine(viewportPen, new Point(viewportLine.Item1, viewportLine.Item2), new Point(viewportLine.Item3, viewportLine.Item4)); viewDrawingContext.DrawLine(viewportPen, new Point(viewStart.X, viewStart.Y), new Point(viewEnd.X, viewEnd.Y)); screenDrawingContext.DrawLine(viewportPen, new Point(screenStart.X, screenStart.Y), new Point(screenEnd.X, screenEnd.Y)); } // draw axes var axisLines = new Tuple<int, int, int, int, int, int, Pen>[] { Tuple.Create(0, 0, 0, axisLength, 0, 0, xAxisPen), Tuple.Create(0, 0, 0, 0, axisLength, 0, yAxisPen), Tuple.Create(0, 0, 0, 0, 0, axisLength, zAxisPen) }; foreach (var axisLine in axisLines) { var viewStart = XNA.Vector3.Transform(new XNA.Vector3(axisLine.Item1, axisLine.Item2, axisLine.Item3), camera.ViewMatrix); var viewEnd = XNA.Vector3.Transform(new XNA.Vector3(axisLine.Item4, axisLine.Item5, axisLine.Item6), camera.ViewMatrix); var screenStart = camera.WorldPointToScreen(new XNA.Vector3(axisLine.Item1, axisLine.Item2, axisLine.Item3)); var screenEnd = camera.WorldPointToScreen(new XNA.Vector3(axisLine.Item4, axisLine.Item5, axisLine.Item6)); worldDrawingContext.DrawLine(axisLine.Item7, new Point(axisLine.Item1, axisLine.Item2), new Point(axisLine.Item4, axisLine.Item5)); viewDrawingContext.DrawLine(axisLine.Item7, new Point(viewStart.X, viewStart.Y), new Point(viewEnd.X, viewEnd.Y)); screenDrawingContext.DrawLine(axisLine.Item7, new Point(screenStart.X, screenStart.Y), new Point(screenEnd.X, screenEnd.Y)); } // for all points in all geometries to be rendered, find the closest and furthest away from the camera so we can lighten lines that are further away var distancesToAllGeometrySections = from geometry in geometries let geometryViewMatrix = geometry.WorldMatrix * camera.ViewMatrix from section in geometry.Sections from point in new XNA.Vector3[] { section.Item1, section.Item2 } let viewPoint = XNA.Vector3.Transform(point, geometryViewMatrix) select viewPoint.Length(); var furthestDistance = distancesToAllGeometrySections.Max(); var closestDistance = distancesToAllGeometrySections.Min(); var deltaDistance = Math.Max(0.000001f, furthestDistance - closestDistance); // draw each geometry for (var i = 0; i < geometries.Length; ++i) { var geometry = geometries[i]; // there's probably a more correct name for this, but basically this gets the geometry relative to the camera so we can check how far away each point is from the camera var geometryViewMatrix = geometry.WorldMatrix * camera.ViewMatrix; // we order roughly by those sections furthest from the camera to those closest, so that the closer ones "overwrite" the ones further away var orderedSections = from section in geometry.Sections let startPointRelativeToCamera = XNA.Vector3.Transform(section.Item1, geometryViewMatrix) let endPointRelativeToCamera = XNA.Vector3.Transform(section.Item2, geometryViewMatrix) let startPointDistance = startPointRelativeToCamera.Length() let endPointDistance = endPointRelativeToCamera.Length() orderby (startPointDistance + endPointDistance) descending select new { Section = section, DistanceToStart = startPointDistance, DistanceToEnd = endPointDistance }; foreach (var orderedSection in orderedSections) { var start = XNA.Vector3.Transform(orderedSection.Section.Item1, geometry.WorldMatrix); var end = XNA.Vector3.Transform(orderedSection.Section.Item2, geometry.WorldMatrix); var viewStart = XNA.Vector3.Transform(start, camera.ViewMatrix); var viewEnd = XNA.Vector3.Transform(end, camera.ViewMatrix); worldDrawingContext.DrawLine(nonScreenSpacePen, new Point(start.X, start.Y), new Point(end.X, end.Y)); viewDrawingContext.DrawLine(nonScreenSpacePen, new Point(viewStart.X, viewStart.Y), new Point(viewEnd.X, viewEnd.Y)); // screen rendering is more complicated purely because I wanted geometry to fade the further away it is from the camera // otherwise, it's very hard to tell whether the rendering is actually correct or not var startDistanceRatio = (orderedSection.DistanceToStart - closestDistance) / deltaDistance; var endDistanceRatio = (orderedSection.DistanceToEnd - closestDistance) / deltaDistance; // lerp towards white based on distance from camera, but only to a maximum of 90% var startColor = Lerp(geometryBaseColor, Colors.White, startDistanceRatio * 0.9f); var endColor = Lerp(geometryBaseColor, Colors.White, endDistanceRatio * 0.9f); var screenStart = camera.WorldPointToScreen(start); var screenEnd = camera.WorldPointToScreen(end); var brush = new LinearGradientBrush { StartPoint = new Point(screenStart.X, screenStart.Y), EndPoint = new Point(screenEnd.X, screenEnd.Y), MappingMode = BrushMappingMode.Absolute }; brush.GradientStops.Add(new GradientStop(startColor, 0)); brush.GradientStops.Add(new GradientStop(endColor, 1)); var pen = new Pen(brush, 1); brush.Freeze(); pen.Freeze(); screenDrawingContext.DrawLine(pen, new Point(screenStart.X, screenStart.Y), new Point(screenEnd.X, screenEnd.Y)); } } } worldRender = worldDrawingVisual; viewRender = viewDrawingVisual; screenRender = screenDrawingVisual; } private static float Lerp(float start, float end, float amount) { var difference = end - start; var adjusted = difference * amount; return start + adjusted; } private static Color Lerp(Color color, Color to, float amount) { var sr = color.R; var sg = color.G; var sb = color.B; var er = to.R; var eg = to.G; var eb = to.B; var r = (byte)Lerp(sr, er, amount); var g = (byte)Lerp(sg, eg, amount); var b = (byte)Lerp(sb, eb, amount); return Color.FromArgb(255, r, g, b); } private void ShowRenders(DrawingVisual worldRender, DrawingVisual viewRender, DrawingVisual screenRender) { var itemsControl = new ItemsControl(); itemsControl.Items.Add(new HeaderedContentControl { Header = "World", Content = new DrawingVisualHost(worldRender)}); itemsControl.Items.Add(new HeaderedContentControl { Header = "View", Content = new DrawingVisualHost(viewRender) }); itemsControl.Items.Add(new HeaderedContentControl { Header = "Screen", Content = new DrawingVisualHost(screenRender) }); var window = new Window { Title = "Renders", Content = itemsControl, ShowInTaskbar = true, SizeToContent = SizeToContent.WidthAndHeight }; window.ShowDialog(); } #endregion #region Supporting Types // stupidly simple 3D geometry class, consisting of a series of sections that will be connected by lines private abstract class Geometry { public abstract IEnumerable<Tuple<XNA.Vector3, XNA.Vector3>> Sections { get; } public XNA.Matrix WorldMatrix { get; set; } } private sealed class Line : Geometry { private readonly XNA.Vector3 magnitude; public Line(XNA.Vector3 magnitude) { this.magnitude = magnitude; } public override IEnumerable<Tuple<XNA.Vector3, XNA.Vector3>> Sections { get { yield return Tuple.Create(XNA.Vector3.Zero, this.magnitude); } } } private sealed class PolyLine : Geometry { private readonly XNA.Vector3[] points; public PolyLine(params XNA.Vector3[] points) { this.points = points; } public override IEnumerable<Tuple<XNA.Vector3, XNA.Vector3>> Sections { get { if (this.points.Length < 2) { yield break; } var end = this.points[0]; for (var i = 1; i < this.points.Length; ++i) { var start = end; end = this.points[i]; yield return Tuple.Create(start, end); } } } } private sealed class Cube : Geometry { private readonly float size; public Cube(float size) { this.size = size; } public override IEnumerable<Tuple<XNA.Vector3, XNA.Vector3>> Sections { get { var halfSize = this.size / 2; var frontBottomLeft = new XNA.Vector3(-halfSize, halfSize, -halfSize); var frontBottomRight = new XNA.Vector3(halfSize, halfSize, -halfSize); var frontTopLeft = new XNA.Vector3(-halfSize, halfSize, halfSize); var frontTopRight = new XNA.Vector3(halfSize, halfSize, halfSize); var backBottomLeft = new XNA.Vector3(-halfSize, -halfSize, -halfSize); var backBottomRight = new XNA.Vector3(halfSize, -halfSize, -halfSize); var backTopLeft = new XNA.Vector3(-halfSize, -halfSize, halfSize); var backTopRight = new XNA.Vector3(halfSize, -halfSize, halfSize); // front face yield return Tuple.Create(frontBottomLeft, frontBottomRight); yield return Tuple.Create(frontBottomLeft, frontTopLeft); yield return Tuple.Create(frontTopLeft, frontTopRight); yield return Tuple.Create(frontTopRight, frontBottomRight); // left face yield return Tuple.Create(frontTopLeft, backTopLeft); yield return Tuple.Create(backTopLeft, backBottomLeft); yield return Tuple.Create(backBottomLeft, frontBottomLeft); // right face yield return Tuple.Create(frontTopRight, backTopRight); yield return Tuple.Create(backTopRight, backBottomRight); yield return Tuple.Create(backBottomRight, frontBottomRight); // back face yield return Tuple.Create(backBottomLeft, backBottomRight); yield return Tuple.Create(backTopLeft, backTopRight); } } } private sealed class Sphere : Geometry { private readonly float radius; private readonly int subsections; public Sphere(float radius, int subsections) { this.radius = radius; this.subsections = subsections; } public override IEnumerable<Tuple<XNA.Vector3, XNA.Vector3>> Sections { get { var latitudeLines = this.subsections; var longitudeLines = this.subsections; // see http://stackoverflow.com/a/4082020/5380 var results = from latitudeLine in Enumerable.Range(0, latitudeLines) from longitudeLine in Enumerable.Range(0, longitudeLines) let latitudeRatio = latitudeLine / (float)latitudeLines let longitudeRatio = longitudeLine / (float)longitudeLines let nextLatitudeRatio = (latitudeLine + 1) / (float)latitudeLines let nextLongitudeRatio = (longitudeLine + 1) / (float)longitudeLines let z1 = Math.Cos(Math.PI * latitudeRatio) let z2 = Math.Cos(Math.PI * nextLatitudeRatio) let x1 = Math.Sin(Math.PI * latitudeRatio) * Math.Cos(Math.PI * 2 * longitudeRatio) let y1 = Math.Sin(Math.PI * latitudeRatio) * Math.Sin(Math.PI * 2 * longitudeRatio) let x2 = Math.Sin(Math.PI * nextLatitudeRatio) * Math.Cos(Math.PI * 2 * longitudeRatio) let y2 = Math.Sin(Math.PI * nextLatitudeRatio) * Math.Sin(Math.PI * 2 * longitudeRatio) let x3 = Math.Sin(Math.PI * latitudeRatio) * Math.Cos(Math.PI * 2 * nextLongitudeRatio) let y3 = Math.Sin(Math.PI * latitudeRatio) * Math.Sin(Math.PI * 2 * nextLongitudeRatio) let start = new XNA.Vector3((float)x1 * radius, (float)y1 * radius, (float)z1 * radius) let firstEnd = new XNA.Vector3((float)x2 * radius, (float)y2 * radius, (float)z2 * radius) let secondEnd = new XNA.Vector3((float)x3 * radius, (float)y3 * radius, (float)z1 * radius) select new { First = Tuple.Create(start, firstEnd), Second = Tuple.Create(start, secondEnd) }; foreach (var result in results) { yield return result.First; yield return result.Second; } } } } #endregion }

    Read the article

  • Strange (Undefined?) Behavior of Free in C

    - by Chris Cirefice
    This is really strange... and I can't debug it (tried for about two hours, debugger starts going haywire after a while...). Anyway, I'm trying to do something really simple: Free an array of strings. The array is in the form: char **myStrings. The array elements are initialized as: myString[index] = malloc(strlen(word)); myString[index] = word; and I'm calling a function like this: free_memory(myStrings, size); where size is the length of the array (I know this is not the problem, I tested it extensively and everything except this function is working). free_memory looks like this: void free_memory(char **list, int size) { for (int i = 0; i < size; i ++) { free(list[i]); } free(list); } Now here comes the weird part. if (size> strlen(list[i])) then the program crashes. For example, imagine that I have a list of strings that looks something like this: myStrings[0] = "Some"; myStrings[1] = "random"; myStrings[2] = "strings"; And thus the length of this array is 3. If I pass this to my free_memory function, strlen(myStrings[0]) > 3 (4 3), and the program crashes. However, if I change myStrings[0] to be "So" instead, then strlen(myStrings[0]) < 3 (2 < 3) and the program does not crash. So it seems to me that free(list[i]) is actually going through the char[] that is at that location and trying to free each character, which I imagine is undefined behavior. The only reason I say this is because I can play around with the size of the first element of myStrings and make the program crash whenever I feel like it, so I'm assuming that this is the problem area. Note: I did try to debug this by stepping through the function that calls free_memory, noting any weird values and such, but the moment I step into the free_memory function, the debugger crashes, so I'm not really sure what is going on. Nothing is out of the ordinary until I enter the function, then the world explodes. Another note: I also posted the shortened version of the source for this program (not too long; Pastebin) here. I am compiling on MinGW with the c99 flag on. PS - I just thought of this. I am indeed passing numUniqueWords to the free function, and I know that this does not actually free the entire piece of memory that I allocated. I've called it both ways, that's not the issue. And I left it how I did because that is the way that I will be calling it after I get it to work in the first place, I need to revise some of my logic in that function. Source, as per request (on-site): #include <stdio.h> #include <string.h> #include <ctype.h> #include <stdlib.h> #include "words.h" int getNumUniqueWords(char text[], int size); int main(int argc, char* argv[]) { setvbuf(stdout, NULL, 4, _IONBF); // For Eclipse... stupid bug. --> does NOT affect the program, just the output to console! int nbr_words; char text[] = "Some - \"text, a stdin\". We'll have! also repeat? We'll also have a repeat!"; int length = sizeof(text); nbr_words = getNumUniqueWords(text, length); return 0; } void free_memory(char **list, int size) { for (int i = 0; i < size; i ++) { // You can see that printing the values is fine, as long as free is not called. // When free is called, the program will crash if (size > strlen(list[i])) //printf("Wanna free value %d w/len of %d: %s\n", i, strlen(list[i]), list[i]); free(list[i]); } free(list); } int getNumUniqueWords(char text[], int length) { int numTotalWords = 0; char *word; printf("Length: %d characters\n", length); char totalWords[length]; strcpy(totalWords, text); word = strtok(totalWords, " ,.-!?()\"0123456789"); while (word != NULL) { numTotalWords ++; printf("%s\n", word); word = strtok(NULL, " ,.-!?()\"0123456789"); } printf("Looks like we counted %d total words\n\n", numTotalWords); char *uniqueWords[numTotalWords]; char *tempWord; int wordAlreadyExists = 0; int numUniqueWords = 0; char totalWordsCopy[length]; strcpy(totalWordsCopy, text); for (int i = 0; i < numTotalWords; i++) { uniqueWords[i] = NULL; } // Tokenize until all the text is consumed. word = strtok(totalWordsCopy, " ,.-!?()\"0123456789"); while (word != NULL) { // Look through the word list for the current token. for (int j = 0; j < numTotalWords; j ++) { // Just for clarity, no real meaning. tempWord = uniqueWords[j]; // The word list is either empty or the current token is not in the list. if (tempWord == NULL) { break; } //printf("Comparing (%s) with (%s)\n", tempWord, word); // If the current token is the same as the current element in the word list, mark and break if (strcmp(tempWord, word) == 0) { printf("\nDuplicate: (%s)\n\n", word); wordAlreadyExists = 1; break; } } // Word does not exist, add it to the array. if (!wordAlreadyExists) { uniqueWords[numUniqueWords] = malloc(strlen(word)); uniqueWords[numUniqueWords] = word; numUniqueWords ++; printf("Unique: %s\n", word); } // Reset flags and continue. wordAlreadyExists = 0; word = strtok(NULL, " ,.-!?()\"0123456789"); } // Print out the array just for funsies - make sure it's working properly. for (int x = 0; x <numUniqueWords; x++) { printf("Unique list %d: %s\n", x, uniqueWords[x]); } printf("\nNumber of unique words: %d\n\n", numUniqueWords); // Right below is where things start to suck. free_memory(uniqueWords, numUniqueWords); return numUniqueWords; }

    Read the article

  • The Incremental Architect&rsquo;s Napkin - #5 - Design functions for extensibility and readability

    - by Ralf Westphal
    Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/08/24/the-incremental-architectrsquos-napkin---5---design-functions-for.aspx The functionality of programs is entered via Entry Points. So what we´re talking about when designing software is a bunch of functions handling the requests represented by and flowing in through those Entry Points. Designing software thus consists of at least three phases: Analyzing the requirements to find the Entry Points and their signatures Designing the functionality to be executed when those Entry Points get triggered Implementing the functionality according to the design aka coding I presume, you´re familiar with phase 1 in some way. And I guess you´re proficient in implementing functionality in some programming language. But in my experience developers in general are not experienced in going through an explicit phase 2. “Designing functionality? What´s that supposed to mean?” you might already have thought. Here´s my definition: To design functionality (or functional design for short) means thinking about… well, functions. You find a solution for what´s supposed to happen when an Entry Point gets triggered in terms of functions. A conceptual solution that is, because those functions only exist in your head (or on paper) during this phase. But you may have guess that, because it´s “design” not “coding”. And here is, what functional design is not: It´s not about logic. Logic is expressions (e.g. +, -, && etc.) and control statements (e.g. if, switch, for, while etc.). Also I consider calling external APIs as logic. It´s equally basic. It´s what code needs to do in order to deliver some functionality or quality. Logic is what´s doing that needs to be done by software. Transformations are either done through expressions or API-calls. And then there is alternative control flow depending on the result of some expression. Basically it´s just jumps in Assembler, sometimes to go forward (if, switch), sometimes to go backward (for, while, do). But calling your own function is not logic. It´s not necessary to produce any outcome. Functionality is not enhanced by adding functions (subroutine calls) to your code. Nor is quality increased by adding functions. No performance gain, no higher scalability etc. through functions. Functions are not relevant to functionality. Strange, isn´t it. What they are important for is security of investment. By introducing functions into our code we can become more productive (re-use) and can increase evolvability (higher unterstandability, easier to keep code consistent). That´s no small feat, however. Evolvable code can hardly be overestimated. That´s why to me functional design is so important. It´s at the core of software development. To sum this up: Functional design is on a level of abstraction above (!) logical design or algorithmic design. Functional design is only done until you get to a point where each function is so simple you are very confident you can easily code it. Functional design an logical design (which mostly is coding, but can also be done using pseudo code or flow charts) are complementary. Software needs both. If you start coding right away you end up in a tangled mess very quickly. Then you need back out through refactoring. Functional design on the other hand is bloodless without actual code. It´s just a theory with no experiments to prove it. But how to do functional design? An example of functional design Let´s assume a program to de-duplicate strings. The user enters a number of strings separated by commas, e.g. a, b, a, c, d, b, e, c, a. And the program is supposed to clear this list of all doubles, e.g. a, b, c, d, e. There is only one Entry Point to this program: the user triggers the de-duplication by starting the program with the string list on the command line C:\>deduplicate "a, b, a, c, d, b, e, c, a" a, b, c, d, e …or by clicking on a GUI button. This leads to the Entry Point function to get called. It´s the program´s main function in case of the batch version or a button click event handler in the GUI version. That´s the physical Entry Point so to speak. It´s inevitable. What then happens is a three step process: Transform the input data from the user into a request. Call the request handler. Transform the output of the request handler into a tangible result for the user. Or to phrase it a bit more generally: Accept input. Transform input into output. Present output. This does not mean any of these steps requires a lot of effort. Maybe it´s just one line of code to accomplish it. Nevertheless it´s a distinct step in doing the processing behind an Entry Point. Call it an aspect or a responsibility - and you will realize it most likely deserves a function of its own to satisfy the Single Responsibility Principle (SRP). Interestingly the above list of steps is already functional design. There is no logic, but nevertheless the solution is described - albeit on a higher level of abstraction than you might have done yourself. But it´s still on a meta-level. The application to the domain at hand is easy, though: Accept string list from command line De-duplicate Present de-duplicated strings on standard output And this concrete list of processing steps can easily be transformed into code:static void Main(string[] args) { var input = Accept_string_list(args); var output = Deduplicate(input); Present_deduplicated_string_list(output); } Instead of a big problem there are three much smaller problems now. If you think each of those is trivial to implement, then go for it. You can stop the functional design at this point. But maybe, just maybe, you´re not so sure how to go about with the de-duplication for example. Then just implement what´s easy right now, e.g.private static string Accept_string_list(string[] args) { return args[0]; } private static void Present_deduplicated_string_list( string[] output) { var line = string.Join(", ", output); Console.WriteLine(line); } Accept_string_list() contains logic in the form of an API-call. Present_deduplicated_string_list() contains logic in the form of an expression and an API-call. And then repeat the functional design for the remaining processing step. What´s left is the domain logic: de-duplicating a list of strings. How should that be done? Without any logic at our disposal during functional design you´re left with just functions. So which functions could make up the de-duplication? Here´s a suggestion: De-duplicate Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Processing step 2 obviously was the core of the solution. That´s where real creativity was needed. That´s the core of the domain. But now after this refinement the implementation of each step is easy again:private static string[] Parse_string_list(string input) { return input.Split(',') .Select(s => s.Trim()) .ToArray(); } private static Dictionary<string,object> Compile_unique_strings(string[] strings) { return strings.Aggregate( new Dictionary<string, object>(), (agg, s) => { agg[s] = null; return agg; }); } private static string[] Serialize_unique_strings( Dictionary<string,object> dict) { return dict.Keys.ToArray(); } With these three additional functions Main() now looks like this:static void Main(string[] args) { var input = Accept_string_list(args); var strings = Parse_string_list(input); var dict = Compile_unique_strings(strings); var output = Serialize_unique_strings(dict); Present_deduplicated_string_list(output); } I think that´s very understandable code: just read it from top to bottom and you know how the solution to the problem works. It´s a mirror image of the initial design: Accept string list from command line Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Present de-duplicated strings on standard output You can even re-generate the design by just looking at the code. Code and functional design thus are always in sync - if you follow some simple rules. But about that later. And as a bonus: all the functions making up the process are small - which means easy to understand, too. So much for an initial concrete example. Now it´s time for some theory. Because there is method to this madness ;-) The above has only scratched the surface. Introducing Flow Design Functional design starts with a given function, the Entry Point. Its goal is to describe the behavior of the program when the Entry Point is triggered using a process, not an algorithm. An algorithm consists of logic, a process on the other hand consists just of steps or stages. Each processing step transforms input into output or a side effect. Also it might access resources, e.g. a printer, a database, or just memory. Processing steps thus can rely on state of some sort. This is different from Functional Programming, where functions are supposed to not be stateful and not cause side effects.[1] In its simplest form a process can be written as a bullet point list of steps, e.g. Get data from user Output result to user Transform data Parse data Map result for output Such a compilation of steps - possibly on different levels of abstraction - often is the first artifact of functional design. It can be generated by a team in an initial design brainstorming. Next comes ordering the steps. What should happen first, what next etc.? Get data from user Parse data Transform data Map result for output Output result to user That´s great for a start into functional design. It´s better than starting to code right away on a given function using TDD. Please get me right: TDD is a valuable practice. But it can be unnecessarily hard if the scope of a functionn is too large. But how do you know beforehand without investing some thinking? And how to do this thinking in a systematic fashion? My recommendation: For any given function you´re supposed to implement first do a functional design. Then, once you´re confident you know the processing steps - which are pretty small - refine and code them using TDD. You´ll see that´s much, much easier - and leads to cleaner code right away. For more information on this approach I call “Informed TDD” read my book of the same title. Thinking before coding is smart. And writing down the solution as a bunch of functions possibly is the simplest thing you can do, I´d say. It´s more according to the KISS (Keep It Simple, Stupid) principle than returning constants or other trivial stuff TDD development often is started with. So far so good. A simple ordered list of processing steps will do to start with functional design. As shown in the above example such steps can easily be translated into functions. Moving from design to coding thus is simple. However, such a list does not scale. Processing is not always that simple to be captured in a list. And then the list is just text. Again. Like code. That means the design is lacking visuality. Textual representations need more parsing by your brain than visual representations. Plus they are limited in their “dimensionality”: text just has one dimension, it´s sequential. Alternatives and parallelism are hard to encode in text. In addition the functional design using numbered lists lacks data. It´s not visible what´s the input, output, and state of the processing steps. That´s why functional design should be done using a lightweight visual notation. No tool is necessary to draw such designs. Use pen and paper; a flipchart, a whiteboard, or even a napkin is sufficient. Visualizing processes The building block of the functional design notation is a functional unit. I mostly draw it like this: Something is done, it´s clear what goes in, it´s clear what comes out, and it´s clear what the processing step requires in terms of state or hardware. Whenever input flows into a functional unit it gets processed and output is produced and/or a side effect occurs. Flowing data is the driver of something happening. That´s why I call this approach to functional design Flow Design. It´s about data flow instead of control flow. Control flow like in algorithms is of no concern to functional design. Thinking about control flow simply is too low level. Once you start with control flow you easily get bogged down by tons of details. That´s what you want to avoid during design. Design is supposed to be quick, broad brush, abstract. It should give overview. But what about all the details? As Robert C. Martin rightly said: “Programming is abot detail”. Detail is a matter of code. Once you start coding the processing steps you designed you can worry about all the detail you want. Functional design does not eliminate all the nitty gritty. It just postpones tackling them. To me that´s also an example of the SRP. Function design has the responsibility to come up with a solution to a problem posed by a single function (Entry Point). And later coding has the responsibility to implement the solution down to the last detail (i.e. statement, API-call). TDD unfortunately mixes both responsibilities. It´s just coding - and thereby trying to find detailed implementations (green phase) plus getting the design right (refactoring). To me that´s one reason why TDD has failed to deliver on its promise for many developers. Using functional units as building blocks of functional design processes can be depicted very easily. Here´s the initial process for the example problem: For each processing step draw a functional unit and label it. Choose a verb or an “action phrase” as a label, not a noun. Functional design is about activities, not state or structure. Then make the output of an upstream step the input of a downstream step. Finally think about the data that should flow between the functional units. Write the data above the arrows connecting the functional units in the direction of the data flow. Enclose the data description in brackets. That way you can clearly see if all flows have already been specified. Empty brackets mean “no data is flowing”, but nevertheless a signal is sent. A name like “list” or “strings” in brackets describes the data content. Use lower case labels for that purpose. A name starting with an upper case letter like “String” or “Customer” on the other hand signifies a data type. If you like, you also can combine descriptions with data types by separating them with a colon, e.g. (list:string) or (strings:string[]). But these are just suggestions from my practice with Flow Design. You can do it differently, if you like. Just be sure to be consistent. Flows wired-up in this manner I call one-dimensional (1D). Each functional unit just has one input and/or one output. A functional unit without an output is possible. It´s like a black hole sucking up input without producing any output. Instead it produces side effects. A functional unit without an input, though, does make much sense. When should it start to work? What´s the trigger? That´s why in the above process even the first processing step has an input. If you like, view such 1D-flows as pipelines. Data is flowing through them from left to right. But as you can see, it´s not always the same data. It get´s transformed along its passage: (args) becomes a (list) which is turned into (strings). The Principle of Mutual Oblivion A very characteristic trait of flows put together from function units is: no functional units knows another one. They are all completely independent of each other. Functional units don´t know where their input is coming from (or even when it´s gonna arrive). They just specify a range of values they can process. And they promise a certain behavior upon input arriving. Also they don´t know where their output is going. They just produce it in their own time independent of other functional units. That means at least conceptually all functional units work in parallel. Functional units don´t know their “deployment context”. They now nothing about the overall flow they are place in. They are just consuming input from some upstream, and producing output for some downstream. That makes functional units very easy to test. At least as long as they don´t depend on state or resources. I call this the Principle of Mutual Oblivion (PoMO). Functional units are oblivious of others as well as an overall context/purpose. They are just parts of a whole focused on a single responsibility. How the whole is built, how a larger goal is achieved, is of no concern to the single functional units. By building software in such a manner, functional design interestingly follows nature. Nature´s building blocks for organisms also follow the PoMO. The cells forming your body do not know each other. Take a nerve cell “controlling” a muscle cell for example:[2] The nerve cell does not know anything about muscle cells, let alone the specific muscel cell it is “attached to”. Likewise the muscle cell does not know anything about nerve cells, let a lone a specific nerve cell “attached to” it. Saying “the nerve cell is controlling the muscle cell” thus only makes sense when viewing both from the outside. “Control” is a concept of the whole, not of its parts. Control is created by wiring-up parts in a certain way. Both cells are mutually oblivious. Both just follow a contract. One produces Acetylcholine (ACh) as output, the other consumes ACh as input. Where the ACh is going, where it´s coming from neither cell cares about. Million years of evolution have led to this kind of division of labor. And million years of evolution have produced organism designs (DNA) which lead to the production of these different cell types (and many others) and also to their co-location. The result: the overall behavior of an organism. How and why this happened in nature is a mystery. For our software, though, it´s clear: functional and quality requirements needs to be fulfilled. So we as developers have to become “intelligent designers” of “software cells” which we put together to form a “software organism” which responds in satisfying ways to triggers from it´s environment. My bet is: If nature gets complex organisms working by following the PoMO, who are we to not apply this recipe for success to our much simpler “machines”? So my rule is: Wherever there is functionality to be delivered, because there is a clear Entry Point into software, design the functionality like nature would do it. Build it from mutually oblivious functional units. That´s what Flow Design is about. In that way it´s even universal, I´d say. Its notation can also be applied to biology: Never mind labeling the functional units with nouns. That´s ok in Flow Design. You´ll do that occassionally for functional units on a higher level of abstraction or when their purpose is close to hardware. Getting a cockroach to roam your bedroom takes 1,000,000 nerve cells (neurons). Getting the de-duplication program to do its job just takes 5 “software cells” (functional units). Both, though, follow the same basic principle. Translating functional units into code Moving from functional design to code is no rocket science. In fact it´s straightforward. There are two simple rules: Translate an input port to a function. Translate an output port either to a return statement in that function or to a function pointer visible to that function. The simplest translation of a functional unit is a function. That´s what you saw in the above example. Functions are mutually oblivious. That why Functional Programming likes them so much. It makes them composable. Which is the reason, nature works according to the PoMO. Let´s be clear about one thing: There is no dependency injection in nature. For all of an organism´s complexity no DI container is used. Behavior is the result of smooth cooperation between mutually oblivious building blocks. Functions will often be the adequate translation for the functional units in your designs. But not always. Take for example the case, where a processing step should not always produce an output. Maybe the purpose is to filter input. Here the functional unit consumes words and produces words. But it does not pass along every word flowing in. Some words are swallowed. Think of a spell checker. It probably should not check acronyms for correctness. There are too many of them. Or words with no more than two letters. Such words are called “stop words”. In the above picture the optionality of the output is signified by the astrisk outside the brackets. It means: Any number of (word) data items can flow from the functional unit for each input data item. It might be none or one or even more. This I call a stream of data. Such behavior cannot be translated into a function where output is generated with return. Because a function always needs to return a value. So the output port is translated into a function pointer or continuation which gets passed to the subroutine when called:[3]void filter_stop_words( string word, Action<string> onNoStopWord) { if (...check if not a stop word...) onNoStopWord(word); } If you want to be nitpicky you might call such a function pointer parameter an injection. And technically you´re right. Conceptually, though, it´s not an injection. Because the subroutine is not functionally dependent on the continuation. Firstly continuations are procedures, i.e. subroutines without a return type. Remember: Flow Design is about unidirectional data flow. Secondly the name of the formal parameter is chosen in a way as to not assume anything about downstream processing steps. onNoStopWord describes a situation (or event) within the functional unit only. Translating output ports into function pointers helps keeping functional units mutually oblivious in cases where output is optional or produced asynchronically. Either pass the function pointer to the function upon call. Or make it global by putting it on the encompassing class. Then it´s called an event. In C# that´s even an explicit feature.class Filter { public void filter_stop_words( string word) { if (...check if not a stop word...) onNoStopWord(word); } public event Action<string> onNoStopWord; } When to use a continuation and when to use an event dependens on how a functional unit is used in flows and how it´s packed together with others into classes. You´ll see examples further down the Flow Design road. Another example of 1D functional design Let´s see Flow Design once more in action using the visual notation. How about the famous word wrap kata? Robert C. Martin has posted a much cited solution including an extensive reasoning behind his TDD approach. So maybe you want to compare it to Flow Design. The function signature given is:string WordWrap(string text, int maxLineLength) {...} That´s not an Entry Point since we don´t see an application with an environment and users. Nevertheless it´s a function which is supposed to provide a certain functionality. The text passed in has to be reformatted. The input is a single line of arbitrary length consisting of words separated by spaces. The output should consist of one or more lines of a maximum length specified. If a word is longer than a the maximum line length it can be split in multiple parts each fitting in a line. Flow Design Let´s start by brainstorming the process to accomplish the feat of reformatting the text. What´s needed? Words need to be assembled into lines Words need to be extracted from the input text The resulting lines need to be assembled into the output text Words too long to fit in a line need to be split Does sound about right? I guess so. And it shows a kind of priority. Long words are a special case. So maybe there is a hint for an incremental design here. First let´s tackle “average words” (words not longer than a line). Here´s the Flow Design for this increment: The the first three bullet points turned into functional units with explicit data added. As the signature requires a text is transformed into another text. See the input of the first functional unit and the output of the last functional unit. In between no text flows, but words and lines. That´s good to see because thereby the domain is clearly represented in the design. The requirements are talking about words and lines and here they are. But note the asterisk! It´s not outside the brackets but inside. That means it´s not a stream of words or lines, but lists or sequences. For each text a sequence of words is output. For each sequence of words a sequence of lines is produced. The asterisk is used to abstract from the concrete implementation. Like with streams. Whether the list of words gets implemented as an array or an IEnumerable is not important during design. It´s an implementation detail. Does any processing step require further refinement? I don´t think so. They all look pretty “atomic” to me. And if not… I can always backtrack and refine a process step using functional design later once I´ve gained more insight into a sub-problem. Implementation The implementation is straightforward as you can imagine. The processing steps can all be translated into functions. Each can be tested easily and separately. Each has a focused responsibility. And the process flow becomes just a sequence of function calls: Easy to understand. It clearly states how word wrapping works - on a high level of abstraction. And it´s easy to evolve as you´ll see. Flow Design - Increment 2 So far only texts consisting of “average words” are wrapped correctly. Words not fitting in a line will result in lines too long. Wrapping long words is a feature of the requested functionality. Whether it´s there or not makes a difference to the user. To quickly get feedback I decided to first implement a solution without this feature. But now it´s time to add it to deliver the full scope. Fortunately Flow Design automatically leads to code following the Open Closed Principle (OCP). It´s easy to extend it - instead of changing well tested code. How´s that possible? Flow Design allows for extension of functionality by inserting functional units into the flow. That way existing functional units need not be changed. The data flow arrow between functional units is a natural extension point. No need to resort to the Strategy Pattern. No need to think ahead where extions might need to be made in the future. I just “phase in” the remaining processing step: Since neither Extract words nor Reformat know of their environment neither needs to be touched due to the “detour”. The new processing step accepts the output of the existing upstream step and produces data compatible with the existing downstream step. Implementation - Increment 2 A trivial implementation checking the assumption if this works does not do anything to split long words. The input is just passed on: Note how clean WordWrap() stays. The solution is easy to understand. A developer looking at this code sometime in the future, when a new feature needs to be build in, quickly sees how long words are dealt with. Compare this to Robert C. Martin´s solution:[4] How does this solution handle long words? Long words are not even part of the domain language present in the code. At least I need considerable time to understand the approach. Admittedly the Flow Design solution with the full implementation of long word splitting is longer than Robert C. Martin´s. At least it seems. Because his solution does not cover all the “word wrap situations” the Flow Design solution handles. Some lines would need to be added to be on par, I guess. But even then… Is a difference in LOC that important as long as it´s in the same ball park? I value understandability and openness for extension higher than saving on the last line of code. Simplicity is not just less code, it´s also clarity in design. But don´t take my word for it. Try Flow Design on larger problems and compare for yourself. What´s the easier, more straightforward way to clean code? And keep in mind: You ain´t seen all yet ;-) There´s more to Flow Design than described in this chapter. In closing I hope I was able to give you a impression of functional design that makes you hungry for more. To me it´s an inevitable step in software development. Jumping from requirements to code does not scale. And it leads to dirty code all to quickly. Some thought should be invested first. Where there is a clear Entry Point visible, it´s functionality should be designed using data flows. Because with data flows abstraction is possible. For more background on why that´s necessary read my blog article here. For now let me point out to you - if you haven´t already noticed - that Flow Design is a general purpose declarative language. It´s “programming by intention” (Shalloway et al.). Just write down how you think the solution should work on a high level of abstraction. This breaks down a large problem in smaller problems. And by following the PoMO the solutions to those smaller problems are independent of each other. So they are easy to test. Or you could even think about getting them implemented in parallel by different team members. Flow Design not only increases evolvability, but also helps becoming more productive. All team members can participate in functional design. This goes beyon collective code ownership. We´re talking collective design/architecture ownership. Because with Flow Design there is a common visual language to talk about functional design - which is the foundation for all other design activities.   PS: If you like what you read, consider getting my ebook “The Incremental Architekt´s Napkin”. It´s where I compile all the articles in this series for easier reading. I like the strictness of Function Programming - but I also find it quite hard to live by. And it certainly is not what millions of programmers are used to. Also to me it seems, the real world is full of state and side effects. So why give them such a bad image? That´s why functional design takes a more pragmatic approach. State and side effects are ok for processing steps - but be sure to follow the SRP. Don´t put too much of it into a single processing step. ? Image taken from www.physioweb.org ? My code samples are written in C#. C# sports typed function pointers called delegates. Action is such a function pointer type matching functions with signature void someName(T t). Other languages provide similar ways to work with functions as first class citizens - even Java now in version 8. I trust you find a way to map this detail of my translation to your favorite programming language. I know it works for Java, C++, Ruby, JavaScript, Python, Go. And if you´re using a Functional Programming language it´s of course a no brainer. ? Taken from his blog post “The Craftsman 62, The Dark Path”. ?

    Read the article

  • Help debugging c fifos code - stack smashing detected - open call not functioning - removing pipes

    - by nunos
    I have three bugs/questions regarding the source code pasted below: stack smashing deteced: In order to compile and not have that error I have addedd the gcc compile flag -fno-stack-protector. However, this should be just a temporary solution, since I would like to find where the cause for this is and correct it. However, I haven't been able to do so. Any clues? For some reason, the last open function call doesn't work and the programs just stops there, without an error, even though the fifo already exists. I want to delete the pipes from the filesystem after before terminating the processes. I have added close and unlink statements at the end, but the fifos are not removed. What am I doing wrong? Thanks very much in advance. P.S.: I am pasting here the whole source file for additional clarity. Just ignore the comments, since they are in my own native language. server.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define FIFO_NAME_MAX_LEN 20 #define FIFO_DIR "/tmp/" #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" typedef enum { false, true } bool; bool background = false; char* logfile = NULL; void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); read(fd, *var, n_bytes); printf("read %d bytes '%s'\n", n_bytes, *var); } void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } int main(int argc, char* argv[]) { //CRIA FIFO CMD_CLI_TO_SRV, se ainda nao existir char* fifo_name_cmd_cli_to_srv; fifo_name_cmd_cli_to_srv = (char*) malloc ( (strlen(FIFO_NAME_CMD_CLI_TO_SRV) + strlen(FIFO_DIR) + 1) * sizeof(char) ); strcpy(fifo_name_cmd_cli_to_srv, FIFO_DIR); strcat(fifo_name_cmd_cli_to_srv, FIFO_NAME_CMD_CLI_TO_SRV); int n = mkfifo(fifo_name_cmd_cli_to_srv, 0660); //TODO ver permissoes if (n < 0 && errno != EEXIST) //se houver erro, e nao for por causa de ja haver um com o mesmo nome, termina o programa { fprintf(stderr, "erro ao criar o fifo\n"); fprintf(stderr, "errno: %d\n", errno); exit(4); } //se por acaso já existir, nao cria o fifo e continua o programa normalmente //le informacao enviada pelo cliente, nesta ordem: //1. pid (em formato char*) do processo cliente //2. comando /CONNECT //3. nome de fifo INFO_SRV_TO_CLIXXX //4. nome de fifo MSG_SRV_TO_CLIXXX char* command; char* fifo_name_info_srv_to_cli; char* fifo_name_msg_srv_to_cli; char* client_pid_string; int client_pid; int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open(fifo_name_cmd_cli_to_srv, O_RDONLY); read_from_fifo(fd_cmd_cli_to_srv, &client_pid_string); client_pid = atoi(client_pid_string); read_from_fifo(fd_cmd_cli_to_srv, &command); //recebe commando /CONNECT read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_info_srv_to_cli); //recebe nome de fifo INFO_SRV_TO_CLIXXX read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_msg_srv_to_cli); //recebe nome de fifo MSG_TO_SRV_TO_CLIXXX //CIRA FIFO MSG_CLIXXX_TO_SRV char fifo_name_msg_cli_to_srv[FIFO_NAME_MAX_LEN]; strcpy(fifo_name_msg_cli_to_srv, FIFO_DIR); strcat(fifo_name_msg_cli_to_srv, "lrc_msg_cli"); strcat(fifo_name_msg_cli_to_srv, client_pid_string); strcat(fifo_name_msg_cli_to_srv, "_to_srv"); n = mkfifo(fifo_name_msg_cli_to_srv, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_msg_cli_to_srv); fprintf(stderr, "errno: %d\n", errno); exit(5); } //envia ao cliente a resposta ao commando /CONNECT fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_WRONLY); write_to_fifo(fd_info_srv_to_cli, fifo_name_msg_cli_to_srv); free(logfile); free(fifo_name_cmd_cli_to_srv); close(fd_cmd_cli_to_srv); unlink(fifo_name_cmd_cli_to_srv); unlink(fifo_name_msg_cli_to_srv); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } client.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define PID_BUFFER_LEN 10 #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" #define FIFO_NAME_INFO_SRV_TO_CLI "lrc_info_srv_to_cli" #define FIFO_NAME_MSG_SRV_TO_CLI "lrc_msg_srv_to_cli" #define COMMAND_MAX_LEN 100 #define FIFO_DIR "/tmp/" typedef enum { false, true } bool; char* nickname; char* name; char* email; void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); printf("read '%s'\n", *var); read(fd, *var, n_bytes); } int main(int argc, char* argv[]) { pid_t pid = getpid(); //CRIA FIFO INFO_SRV_TO_CLIXXX char pid_string[PID_BUFFER_LEN]; sprintf(pid_string, "%d", pid); char* fifo_name_info_srv_to_cli; fifo_name_info_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_INFO_SRV_TO_CLI) + strlen(pid_string) + 1 ) * sizeof(char) ); strcpy(fifo_name_info_srv_to_cli, FIFO_DIR); strcat(fifo_name_info_srv_to_cli, FIFO_NAME_INFO_SRV_TO_CLI); strcat(fifo_name_info_srv_to_cli, pid_string); int n = mkfifo(fifo_name_info_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(6); } int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open("/tmp/lrc_cmd_cli_to_srv", O_WRONLY); char command[COMMAND_MAX_LEN]; printf("> "); scanf("%s", command); while (strcmp(command, "/CONNECT")) { printf("O primeiro comando deverá ser \"/CONNECT\"\n"); printf("> "); scanf("%s", command); } //CRIA FIFO MSG_SRV_TO_CLIXXX char* fifo_name_msg_srv_to_cli; fifo_name_msg_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_MSG_SRV_TO_CLI) + strlen(pid_string) + 1) * sizeof(char) ); strcpy(fifo_name_msg_srv_to_cli, FIFO_DIR); strcat(fifo_name_msg_srv_to_cli, FIFO_NAME_MSG_SRV_TO_CLI); strcat(fifo_name_msg_srv_to_cli, pid_string); n = mkfifo(fifo_name_msg_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(7); } // ENVIA COMANDO /CONNECT write_to_fifo(fd_cmd_cli_to_srv, pid_string); //envia pid do processo cliente write_to_fifo(fd_cmd_cli_to_srv, command); //envia commando /CONNECT write_to_fifo(fd_cmd_cli_to_srv, fifo_name_info_srv_to_cli); //envia nome de fifo INFO_SRV_TO_CLIXXX write_to_fifo(fd_cmd_cli_to_srv, fifo_name_msg_srv_to_cli); //envia nome de fifo MSG_TO_SRV_TO_CLIXXX // recebe do servidor a resposta ao comanddo /CONNECT printf("msg1\n"); printf("vamos tentar abrir %s\n", fifo_name_info_srv_to_cli); fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_RDONLY); printf("%s aberto", fifo_name_info_srv_to_cli); if (fd_info_srv_to_cli < 0) { fprintf(stderr, "erro ao criar %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); } printf("msg2\n"); char* fifo_name_msg_cli_to_srv; printf("msg3\n"); read_from_fifo(fd_info_srv_to_cli, &fifo_name_msg_cli_to_srv); printf("msg4\n"); free(nickname); free(name); free(email); free(fifo_name_info_srv_to_cli); free(fifo_name_msg_srv_to_cli); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } makefile: CC = gcc CFLAGS = -Wall -lpthread -fno-stack-protector all: client server client: client.c $(CC) $(CFLAGS) client.c -o client server: server.c $(CC) $(CFLAGS) server.c -o server clean: rm -f client server *~

    Read the article

< Previous Page | 12 13 14 15 16