Search Results

Search found 415 results on 17 pages for 'corwin joy'.

Page 16/17 | < Previous Page | 12 13 14 15 16 17  | Next Page >

• Windows 8/Surface Lunch Event Summary

  - by Tim Murphy

  Today was a big day for Microsoft with two separate launch event.  The first for Windows 8 and all of it’s hardware partners.  The second was specifically to introduce the Microsoft Windows 8 Surface tablet.  Below are some of the take-aways I got from the webcasts. Windows 8 Launch The three general area that Microsoft focused on were the release of the OS itself, the public unveiling of the Windows Store and the new devices available from its hardware partners. The release of the OS focused on the fact that it will be available at mid-night tonight for both new PCs and for upgrades.  I can’t say that this interested me that much since it was already known to most people.  I think what they did show well was how easy the OS really is to use. The Windows Store is also not a new feature to those of us who have been running the pre-release versions of Windows 8 or have owned Windows Phone 7 for the past 2 years.  What was interesting is that the Windows Store launches with more apps available than any other platforms store at their respective launch.  I think this says a lot about how Microsoft focuses on the ability of developers to create software and make it available.  The of course were sure to emphasize that the Windows Store has better monetary terms for developers than its competitors. The also showed off the fact that XBox Music streaming is available for to all Windows 8 user for free.  Couple this with the Bing suite of apps that give you news, weather, sports and finance right out of the box and I think most people will find the environment a joy to use. I think the hardware demo, while quick and furious, really show where Windows shine: CHOICE!  They made a statement that over 1000 devices have been certified for Windows 8.  They showed tablets, laptops, desktops, all-in-ones and convertibles.  Since these devices have industry standard connectors they give a much wider variety of accessories and devices that you can use with them. Steve Balmer then came on stage and tried to see how many times he could use the “magical”.  He focused on how the Windows 8 OS is designed to integrate with SkyDrive, Skype and Outlook.com.  He also enforced that they think Windows 8 is the best choice for the Enterprise when it comes to protecting data and integrating across devices including Windows Phone 8. With that we were left to wait for the second event of the day. Surface Launch The second event of the day started with kids with magnets.  Ok, they were adults, but who doesn’t like playing with magnets.  Steven Sinofsky detached and reattached the Surface keyboard repeatedly, clearly enjoying himself.  It turns out that there are 4 magnets in the cover, 2 for alignment and 2 as connectors. They then went to giving us the details on the display.  The 10.6” display is optically bonded to the case and is optimized to reduce glare.  I think this came through very well in the demonstrations. The properties of the case were also a great selling point.  The VaporMg allowed them to drop the device on stage, on purpose, and continue working.  Of course they had to bring out the skate boards made from Surface devices. “It just has to feel right” was the reason they gave for many of their design decisions from the weight and size of the device to the way the kickstand and camera work together.  While this gave you the feeling that the whole process was trial and error you could tell that a lot of science went into the specs.  This included making sure that the magnets were strong enough to hold the cover on and still have a 3 year old remove the cover without effort. I am glad that they also decided the a USB port would be part of the spec since it give so many options.  They made the point that this allows Surface to leverage over 420 million existing devices.  That works for me. The last feature that I really thought was important was the microSD port.  Begin stuck with the onboard memory has been an aggravation of mine with many of the devices in the market today. I think they did job of really getting the audience to understand why you want this platform and this particular device.  Using personal examples like creating a video of a birthday party and being in it or the fact that the device was being used to live blog the event and control the lights and presentation.  They showed very well that it was not only fun but very capable of getting real work done.  Handing out tablets to the crowd didn’t hurt either.  In the end I really wanted a Surface even though I really have no need for one on a daily basis.  Great job Microsoft! del.icio.us Tags: Windows 8,Win8,Windows 8 Luanch

  Read the article

• JSF Navigation issue Facelets and Beans

  - by ortho

  Hi, I have an issue with navigation in my simple jsf system. I have MainBean that has two methods: public String register() and public String login(). I have played with faces-config.xml for several hours and I feel like I miss something very important because I think like I have tried all simple solutions so far :). I have added the mysql connector (jdbc) to Tomcat's lib folder and I am able to register the table to mySQL databse. It even allows my users to log in to the page. The only problem is that I can't use navigation in any other page than login.xhtml. Seems like navigation is only active on this one. I tried to use * but is no joy. I am sure that there is a simple fix for that and someone will come up with correct solution soon. Let's skip all the mysql part and try to fix the navigation issue please. faces-config.xml: http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd" version="1.2" com.sun.facelets.FaceletViewHandler mainBean dk.itu.beans.MainBean session registerBean dk.itu.beans.RegisterBean session /login.xhtml success /welcome.xhtml failure /login_failed.xhtml sign /register.xhtml /login_failed.xhtml back /login.xhtml Here the last navigation-rule from login_failed.xhtml does not work at all. login.xhtml (which is the main - starting view): login_failed.xhtml: Here I tried many options. I used action="#{mainBean.register})" method that returns "sign" string and none of these worked. There is one more file (not specified in faces-config.xml file, because did not work either - but going from login.xhtml by button works fine. I tried to manage navigation from login_failed.xhtml first, then I will apply the same rool for registration to come back to login page when customer registers his nick name). register.xhtml: Basicaly mainBean.register now calls the database and returns string, but obviously it doesn't navigate to any view (but gives an entry to database). I believe it is simple fix for most of the experienced web developers and any help will be greately appreciated. I use eclipse, tomcat 6 and Widows Vista if that helps :) Thank you in advance. Kindest regards.

  Read the article

• Dumb IE6 resize behaviour - hope it rings some bells with someone

  - by Ollie2893

  Hi, I'm having no end of fun (sic) with jQuery.tabs. The widget is quite crafty in that it turns basic HTML like so <div> <ul> <li>Tab #1</li> ... </ul> <div for panel #1> </div> <div for panel #2> </div> ... </div> into a cute tabbed dialogue. (It does so by restyling the UL and then toggling the "display" attribute for the panel DIVs to show/not show whatever panel is selected.) Now I found that I can spare myself a lot of trouble in my JS project if I insert a scrollable IFRAME into each panel. One usability problem I'm trying to ameliorate is that when the tabbed panel becomes larger than the browser's window, then the user ends up with too many scrollbars. I am trying to avoid this situation by linking the size of the tabbed panel to that of $(window). That is, I trap and process the resize event on $(window). To make my life bearable, all components are relatively sized. This is also true, in particular, of the IFRAMEs (100% width, 100% height). The only exception are the panel DIVs, which are of fixed height (in px). And this is the only dimension css attribute that I manipulate during my resize action. All of this works a treat in FF and Chrome, but IE6 is doing something rather cute: So long as I do not affect the width of the browser window (but only change its height), only the panel DIV changes in height; the IFRAME contained will not change. As a result of this behaviour, it is not possible to shorten the tabbed panel below the height of the IFRAME. I can lengthen the DIV, yes. But the IFRAME will not fill the panel in that case. All becomes good the moment I make the slightest change to the width of the browser window. In that moment, the IFRAME expands to catch up with the extended DIV or DIV and IFRAME contract in tandem. Bizarre. I inserted useless CSS instructions like "position: relative" and "zoom: 1". Also nudged the display with "display: block". No joy so far. Any ideas? Thanks.

  Read the article

• RSpec mocking a nested model in Rails - ActionController problem

  - by emson

  Hi All I am having a problem in RSpec when my mock object is asked for a URL by the ActionController. The URL is a Mock one and not a correct resource URL. I am running RSpec 1.3.0 and Rails 2.3.5 Basically I have two models. Where a subject has many notes. class Subject < ActiveRecord::Base validates_presence_of :title has_many :notes end class Note < ActiveRecord::Base validates_presence_of :title belongs_to :subject end My routes.rb file nests these two resources as such: ActionController::Routing::Routes.draw do |map| map.resources :subjects, :has_many => :notes end The NotesController.rb file looks like this: class NotesController < ApplicationController # POST /notes # POST /notes.xml def create @subject = Subject.find(params[:subject_id]) @note = @subject.notes.create!(params[:note]) respond_to do |format| format.html { redirect_to(@subject) } end end end Finally this is my RSpec spec which should simply post my mocked objects to the NotesController and be executed... which it does: it "should create note and redirect to subject without javascript" do # usual rails controller test setup here subject = mock(Subject) Subject.stub(:find).and_return(subject) notes_proxy = mock('association proxy', { "create!" => Note.new }) subject.stub(:notes).and_return(notes_proxy) post :create, :subject_id => subject, :note => { :title => 'note title', :body => 'note body' } end The problem is that when the RSpec post method is called. The NotesController correctly handles the Mock Subject object, and create! the new Note object. However when the NoteController#Create method tries to redirect_to I get the following error: NoMethodError in 'NotesController should create note and redirect to subject without javascript' undefined method `spec_mocks_mock_url' for #<NotesController:0x1034495b8> Now this is caused by a bit of Rails trickery that passes an ActiveRecord object (@subject, in our case, which isn't ActiveRecord but a Mock object), eventually to url_for who passes all the options to the Rails' Routing, which then determines the URL. My question is how can I mock Subject so that the correct options are passed so that I my test passes. I've tried passing in :controller = 'subjects' options but no joy. Is there some other way of doing this? Thanks...

  Read the article

• Save File to Sharepoint Server using JAX-WS

  - by Evan Porter

  I'm trying to save a file to a Sharepoint server using JAX-WS. The web service call is reporting a success, but the file doesn't show up. I used this command (from a WinXP) to generate the Java code to make the JAX-WS call: wsimport -keep -extension -Xnocompile http://hostname/sites/teamname/_vti_bin/Copy.asmx?WSDL I get a handle on the web service which I called port using the following: CopySoap port = null; if (userName != null && password != null) { Copy service = new Copy(); port = service.getCopySoap(); ((BindingProvider) port).getRequestContext().put(BindingProvider.USERNAME_PROPERTY, userName); ((BindingProvider) port).getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, password); } else { throw new Exception("Holy Frijolé! Null userName and/or password!"); } I called the web service using the following: port.copyIntoItems(sourceUrl, destUrlCollection, fields , "Contents of the file".getBytes(), copyIntoItemsResult, copyResultCollection) The sourceUrl and the only url in destUrlCollection equals "hostname/sites/teamname/Tech Docs/Sub Folder". The FieldInformationCollection object named fields contains only one FieldInformation. The FieldInformation object has "HelloWorld.txt" as the value for displayName, internalName and value. The type property is set to FieldType.FILE. The id property is set to (java.util.UUID.randomUUID()).toString(). The call to copyIntoItems returns successfuly; copyIntoItemsResult contains a value of 0 and the only CopyResult object set in copyResultCollection has an error code of "SUCCESS" with a null error message. When I look into the "Tech Docs" library on Sharepoint, in the "Sub Folder" there's no file there. Why wouldn't it tell me what I did wrong? Did I just miss a step? Update (Feb 26th, 2011) I've changed my FieldInformation object's displayName and internalName properties to be "Title" as suggested. Still no joy, but a step in the right direction. After playing around with the urls for a bit, I got these results: With both the sourceUrl and the only destination URL equivalent, with no protocol, I get the SUCCESS response but no actual document appears in the document library. With both of the URLs equivalent but with an "http://" protocol specified, I get an UNKNOWN error with "Object reference not set to an instance of an object." as the message. With the source URL an empty string or null, I get an UNKNOWN error with " Value does not fall within the expected range." as the error message.

  Read the article

• Is it possible to reliably auto-decode user files to Unicode? [C#]

  - by NVRAM

  I have a web application that allows users to upload their content for processing. The processing engine expects UTF8 (and I'm composing XML from multiple users' files), so I need to ensure that I can properly decode the uploaded files. Since I'd be surprised if any of my users knew their files even were encoded, I have very little hope they'd be able to correctly specify the encoding (decoder) to use. And so, my application is left with task of detecting before decoding. This seems like such a universal problem, I'm surprised not to find either a framework capability or general recipe for the solution. Can it be I'm not searching with meaningful search terms? I've implemented BOM-aware detection (http://en.wikipedia.org/wiki/Byte_order_mark) but I'm not sure how often files will be uploaded w/o a BOM to indicate encoding, and this isn't useful for most non-UTF files. My questions boil down to: Is BOM-aware detection sufficient for the vast majority of files? In the case where BOM-detection fails, is it possible to try different decoders and determine if they are "valid"? (My attempts indicate the answer is "no.") Under what circumstances will a "valid" file fail with the C# encoder/decoder framework? Is there a repository anywhere that has a multitude of files with various encodings to use for testing? While I'm specifically asking about C#/.NET, I'd like to know the answer for Java, Python and other languages for the next time I have to do this. So far I've found: A "valid" UTF-16 file with Ctrl-S characters has caused encoding to UTF-8 to throw an exception (Illegal character?) (That was an XML encoding exception.) Decoding a valid UTF-16 file with UTF-8 succeeds but gives text with null characters. Huh? Currently, I only expect UTF-8, UTF-16 and probably ISO-8859-1 files, but I want the solution to be extensible if possible. My existing set of input files isn't nearly broad enough to uncover all the problems that will occur with live files. Although the files I'm trying to decode are "text" I think they are often created w/methods that leave garbage characters in the files. Hence "valid" files may not be "pure". Oh joy. Thanks.

  Read the article

• Using XmlDiffPatch when writing to stream

  - by Mark Smith

  I am trying to use xmldiffpatch when comparing two Xmls(one from a stream, the other from a file) and writing the diff patch to a stream. The first method is to write my xml to a memory stream. The second method loads an xml from a file and creates a stream for the patched file to be written into. The third method actually compares the two files and writes the third. The xmldiff.Compare(originalFile, finalFile, dgw); method takes (XmlReader, XmlReader, XmlWriter). I'm always getting that both files are identical, even though they are not, so I know that I am missing something. Any help is appreciated! public MemoryStream FirstXml() { string[] names = { "John", "Mohammed", "Marc", "Tamara", "joy" }; MemoryStream ms = new MemoryStream(); XmlTextWriter xtw= new XmlTextWriter(ms, Encoding.UTF8); xtw.WriteStartDocument(); xtw.WriteStartElement("root"); foreach (string s in names) { xtw.WriteStartElement(s); xtw.WriteEndElement(); } xtw.WriteEndElement(); xtw.WriteEndDocument(); return ms; } public Stream SecondXml() { XmlReader finalFile =XmlReader.Create(@"c:\......\something.xml"); MemoryStream ms = FirstXml(); XmlReader originalFile = XmlReader.Create(ms); MemoryStream ms2 = new MemoryStream(); XmlTextWriter dgw = new XmlTextWriter(ms2, Encoding.UTF8); GenerateDiffGram(originalFile, finalFile, dgw); return ms2; } public void GenerateDiffGram(XmlReader originalFile, XmlReader finalFile, XmlWriter dgw) { XmlDiff xmldiff = new XmlDiff(); bool bIdentical = xmldiff.Compare(originalFile, finalFile, dgw); dgw.Close(); StreamReader sr = new StreamReader(SecondXml()); string xmlOutput = sr.ReadToEnd(); if(xmlOutput.Contains("</xd:xmldiff>")) {Console.WriteLine("Xml files are not identical"); Console.Read();} else {Console.WriteLine("Xml files are identical");Console.Read();} }

  Read the article

• sed - trying to replace first occurrence after a match

  - by wakkaluba

  I am facing a situation that drives me nuts. I am setting up an update server which uses a json file. Don't ask why or how, it sucks and is my only possibility to achieve it. I have been trying and researching for HOURS (many) because I went ballistic and wanted to crack this on my own. But I have to realize I got stuck and need help. So sorry for this chunk but I think it is somewhat important to see... The file is a one liner and repeating the following sequence with changing values (of course). "plugin_name_foo_bar": {"buildDate": "bla", "dependencies": [{"name": "bla", "optional": true, "version": "1.00"}], "developers": [{"developerId": "bla", "email": "[email protected]", "name": "Bla bla2nd"}], "excerpt": "some text {excerpt} !bla.png|thumbnail,border=1! ", "gav": "bla", "labels": ["report", "scm-related"], "name": "plugin_name_foo_bar", "previousTimestamp": "bla", "previousVersion": "1.0", "releaseTimestamp": "bla", "requiredCore": "1", "scm": "github.com", "sha1": "ynnBM2jWo25ZLDdP3ybBOnV/Pio=", "title": "bla", "url": "http://bla.org", "version": "1.0", "wiki": "https://bla.org"}, "Exclusion": {"buildDate": "bla", "dependencies": [], and the next plugin block is glued straight afterwards. What I now want to do is to search for "plugin_foo_bar": {" as this is the unique identifier for a new plugin description block. I want to replace the first sha1 value occuring afterwards. That's where I keep failing. I always grab the first,last or any occurrence in the entire file and not the block :( "title" is the unique identifier after the sha1 value. So I tried to make the .* less greedy but it ain't working out. last attempt was heading towards: sed -i 's/("name": "plugin_name_foo_bar.*sha1": ")([a-zA-Z0-9!@#\$%^&*()\[\]]*)(", "title"\)/\1blablabla\2/1' default.json to find the sha1 value of that plugin but still no joy. I hope someone knows - preferably a simpler approach - before I now continue with trial and error until I have to puke and freakout. I am working with SED on Windows, so Unix approach might help me to figure out how to achieve this in batch but please make it as one-liner if possible. Scripts are a real pain to convert. And I just need SED and no other solution with other tools like AWK. That is absolutely out of discussion. Any help is appreciated :) Cheers Jan

  Read the article

• How to resolve high CPU + excessive stat("/etc/localtime") and clock_gettime(CLOCK_REALTIME) calls

  - by Yemster

  I've been experiencing really high CPU on a ruby on rails app (see stack below) and have been trying to diagnose the possible causes to no avail. Stack: ruby 1.9.3 rails 3.2.6 Apache/2.2.21 (Debian) Phusion Passenger 3.0.11 Whenever I run strace against the spiking Rack process PID (see Top excerpt below), I am seeing a tonne of stat("/etc/localtime") and clock_gettime(CLOCK_REALTIME) calls and have no idea how to stop these. Excerpt from Top showin running PID: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11674 www-user 20 0 313m 182m 5076 R 99 2.3 63:04.60 Rack: /var/www/my_rails_app/current 11634 www-user 20 0 411m 216m 5144 S 10 2.7 197:55.63 Rack: /var/www/my_rails_app/current Strace snippet below: [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 141474018}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 141577456}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 143073982}) = 0 [pid 11674] poll([{fd=15, events=POLLIN|POLLPRI}], 1, 0) = 0 (Timeout) [pid 11674] write(15, "b\0\0\0\3SELECT `images`.* FROM `ima"..., 102) = 102 [pid 11674] read(15, "\1\0\0\1\0229\0\0\2\3def\23myappy_productio"..., 16384) = 2063 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 144138035}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 ... [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 154076443}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 154189429}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 157185700}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 157298770}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 165076003}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 165212572}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 167542679}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354058955, 167683436}) = 0 .... [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 62052248}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 62182486}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 62919948}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 63057266}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 63751707}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 73730686}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 75874687}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 76077133}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 78205019}) = 0 ... [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 89370879}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 89583247}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 91637614}) = 0 [pid 11674] clock_gettime(CLOCK_REALTIME, {1354060036, 91782149}) = 0 Have Google'd around and came across a number of suggestions which I've tried with no success. Things tried so far: Have tried setting time zone as recommended here Made no difference and issue still persists. Content of my /etc/localtime: TZif2UTCTZif2UTC UTC0 Have tried the recommended fix for the leapsecond bug: date -s 'date' No joy so far. I'm fresh out of ideas so any help/advice on how to diagnose or resolve would be greatly appreciated.

  Read the article

• Backup, Migrate or Clone Failing CentOS 4 (LVM)

  - by Hegelworm

  I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks. Update: Thanks for your responses so far - it's much appreciated and makes me feel a little more confident when I can double-check things here. I had the idea of doing a fresh install of CentOS (from the original disk) on the new drive so the partitions and LVM were all set up correctly (after disconnecting my source drive to prevent painful mistakes). I then booted into rescue mode from the same CD, and, to avoid a conflicting label, changed the /boot partition's label using e2label to /bootnew. I then changed the VolGroup name using lvm vgrename from VolGroup00 to VolGroup001. I could then boot with both drives in. After mounting the new drive (via its VolGroup001 alias) into /newhd, I rsync-ed over everything I could to the new drive, using -avr switches and backslashes. Like mentioned here. I then disconnected my original source drive again, booted from the liveCD again, changed back the boot partition label from /bootnew to /boot using e2label and then renamed the VolGroup back to VolGroup00. I then rebooted and it went through the familiar start-up routine only to not find a host of files in proc, usr, lib, var etc. The boot did complete but there were lots of red 'FAILS'. I could log in with my existing creds, but the network was kaput, I couldn't startX (desktop GUI) and there were also a few (a lot) of error messages pertaining to iptables. Back to square one. I naively thought I'd nailed it. Shall I just buy a bigger hard drive and attempt the dd route? I've read that this can mess with LVM setups and there's the added risk of working on two unmounted drives at once with a low-level tool. Thanks again.

  Read the article

• Upgrading Windows 8 boot to VHD to Windows 8.1&ndash;Step by step guide

  - by Liam Westley

  Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/19/upgrading-windows-8-boot-to-vhd-to-windows-8.1ndashstep-by.aspxBoot to VHD – dual booting Windows 7 and Windows 8 became easy When Windows 8 arrived, quite a few people decided that they would still dual boot their machines, and instead of mucking about with resizing disk partitions to free up space for Windows 8 they decided to use the boot from VHD feature to create a huge hard disc image into which Windows 8 could be installed.  Scott Hanselman wrote this installation guide, while I myself used the installation guide from Ed Bott of ZD net fame. Boot to VHD is a great solution, it achieves a dual boot, can be backed up easily and had virtually no effect on the original Windows 7 partition. As a developer who has dual booted Windows operating systems for years, hacking boot.ini files, the boot to VHD was a much easier solution. Upgrade to Windows 8.1 – ah, you can’t do that on a virtual disk installation (boot to VHD) Last week the final version of Windows 8.1 arrived, and I went into the Windows Store to upgrade.  Luckily I’m on a fast download service, and use an SSD, because once the upgrade was downloaded and prepared Windows informed that This PC can’t run Windows 8.1, and provided the reason, You can’t install Windows on a virtual drive.  You can see an image of the message and discussion that sparked my search for a solution in this Microsoft Technet forum post. I was determined not to have to resize partitions yet again and fiddle with VHD to disk utilities and back again, and in the end I did succeed in upgrading to a Windows 8.1 boot to VHD partition.  It takes quite a bit of effort though … tldr; Simple steps of how you upgrade Boot into Windows 7 – make a copy of your Windows 8 VHD, to become Windows 8.1 Enable Hyper-V in your Windows 8 (the original boot to VHD partition) Create a new virtual machine, attaching the copy of your Windows 8 VHD Start the virtual machine, upgrade it via the Windows Store to Windows 8.1 Shutdown the virtual machine Boot into Windows 7 – use the bcedit tool to create a new Windows 8.1 boot to VHD option (pointing at the copy) Boot into the new Windows 8.1 option Reactivate Windows 8.1 (it will have become deactivated by running under Hyper-V) Remove the original Windows 8 VHD, and in Windows 7 use bcedit to remove it from the boot menu Things you’ll need A system that can run Hyper-V under Windows 8 (Intel i5, i7 class CPU) Enough space to have your original Windows 8 boot to VHD and a copy at the same time An ISO or DVD for Windows 8 to create a bootable Windows 8 partition Step by step guide Boot to your base o/s, the real one, Windows 7. Make a copy of the Windows 8 VHD file that you use to boot Windows 8 (via boot from VHD) – I copied it from a folder on C: called VHD-Win8 to VHD-Win8.1 on my N: drive. Reboot your system into Windows 8, and enable Hyper-V if not already present (this may require reboot) Use the Hyper-V manager , create a new Hyper-V machine, using half your system memory, and use the option to attach an existing VHD on the main IDE controller – this will be the new copy you made in Step 2. Start the virtual machine, use Connect to view it, and you’ll probably discover it cannot boot as there is no boot record If this is the case, go to Hyper-V manager, edit the Settings for the virtual machine to attach an ISO of a Windows 8 DVD to the second IDE controller. Start the virtual machine, use Connect to view it, and it should now attempt a fresh installation of Windows 8.  You should select Advanced Options and choose Repair - this will make VHD bootable When the setup reboots your virtual machine, turn off the virtual machine, and remove the ISO of the Windows 8 DVD from the virtual machine settings. Start virtual machine, use Connect to view it.  You will see the devices to be re-discovered (including your quad CPU becoming single CPU).  Eventually you should see the Windows Login screen. You may notice that your desktop background (Win+D) will have turned black as your Windows installation has become deactivate due to the hardware changes between your real PC and Hyper-V. Fortunately becoming deactivated, does not stop you using the Windows Store, where you can select the update to Windows 8.1. You can now watch the progress joy of the Windows 8 update; downloading, preparing to update, checking compatibility, gathering info, preparing to restart, and finally, confirm restart - remember that you are restarting your virtual machine sitting on the copy of the VHD, not the Windows 8 boot to VHD you are currently using to run Hyper-V (confused yet?) After the reboot you get the real upgrade messages; setting up x%, xx%, (quite slow) After a while, Getting ready Applying PC Settings x%, xx% (really slow) Updating your system (fast) Setting up a few more things x%, (quite slow) Getting ready, again Accept license terms Express settings Confirmed previous password Next, I had to set up a Microsoft account – which is possibly now required, and not optional Using the Microsoft account required a 2 factor authorization, via text message, a 7 digit code for me Finalising settings Blank screen, HI .. We're setting up things for you (similar to original Windows 8 install) 'You can get new apps from the Store', below which is ’Installing your apps’ - I had Windows Media Center which is counts as an app from the Store ‘Taking care of a few things’, below which is ‘Installing your apps’ ‘Taking care of a few things’, below ‘Don't turn off your PC’ ‘Getting your apps ready’, below ‘Don't turn off your PC’ ‘Almost ready’, below ‘Don't turn off your PC’ … finally, we get the Windows 8.1 start menu, and a quick Win+D to check the desktop confirmed all the application icons I expected, pinned items on the taskbar, and one app moaning about a missing drive At this point the upgrade is complete – you can shutdown the virtual machine Reboot from the original Windows 8 and return to Windows 7 to configure booting to the Windows 8.1 copy of the VHD In an administrator command prompt do following use the bcdedit tool (from an MSDN blog about configuring VHD to boot in Windows 7) Type bcedit to list the current boot options, so you can copy the GUID (complete with brackets/braces) for the original Windows 8 boot to VHD Create a new menu option, copy of the Windows 8 option; bcdedit /copy {originalguid} /d "Windows 8.1" Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} device vhd=[D:]\Image.vhd Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} osdevice vhd=[D:]\Image.vhd Set autodetection of the HAL (may already be set); bcdedit /set {newguid} detecthal on Reboot from Windows 7 and select the new option 'Windows 8.1' on the boot menu, and you’ll have some messages to look at, as your hardware is redetected (as you are back from 1 CPU to 4 CPUs) ‘Getting devices ready, blank then %xx, with occasional blank screen, for the graphics driver, (fast-ish) Getting Ready message (fast) You will have to suffer one final reboots, choose 'Windows 8.1' and you can now login to a lovely Windows 8.1 start screen running on non virtualized hardware via boot to VHD After checking everything is running fine, you can now choose to Activate Windows, which for me was a toll free phone call to the automated system where you type in lots of numbers to be given a whole bunch of new activation codes. Once you’re happy with your new Windows 8.1 boot to VHD, and no longer need the Windows 8 boot to VHD, feel free to delete the old one.  I do believe once you upgrade, you are no longer licensed to use it anyway. There, that was simple wasn’t it? Looking at the huge list of steps it took to perform this upgrade, you may wonder whether I think this is worth it.  Well, I think it is worth booting to VHD.  It makes backups a snap (go to Windows 7, copy the VHD, you backed up the o/s) and helps with disk management – want to move the o/s, you can move the VHD and repoint the boot menu to the new location. The downside is that Microsoft has complete neglected to support boot to VHD as an upgradable option.  Quite a poor decision in my opinion, and if you read twitter and the forums quite a few people agree with that view.  It’s a shame this got missed in the work on creating the upgrade packages for Windows 8.1.

  Read the article

• SQLAuthority News – Memories at Anniversary of SQL Wait Stats Book

  - by pinaldave

  SQL Wait Stats About a year ago, I had very proud moment. I had published my second book SQL Server Wait Stats with me as a primary author. It has been a long journey since then. The book got great response and it was widely accepted in the community. It was first of its kind of book written specifically on Wait Stats and Performance. The book was based on my earlier month long series written on the same subject SQL Server Wait Stats. Today, on the anniversary of the book, lots of things come to my mind let me share a few here. Idea behind Blog Series A very common question I often receive is why I wrote a 30 day series on Wait Stats. There were two reasons for it. 1) I have been working with SQL Server for a long time and have troubleshoot more than hundreds of SQL Server which are related to performance tuning. It was a great experience and it taught me a lot of new things. I always documented my experience. After a while I found that I was able to completely rely on my own notes when I was troubleshooting any servers. It is right then I decided to document my experience for the community. 2) While working with wait stats there were a few things, which I thought I knew it well as they were working. However, there was always a fear in the back of mind that what happens if what I believed was incorrect and I was on the wrong path all the time. There was only one way to get it validated. Put it out in front community with my understanding and request further help to improve my understanding. It worked, it worked beautifully. I received plenty of conversations, emails and comments. I refined my content based on various conversations and make it more relevant and near accurate. I guess above two are the major reasons for beginning my journey on writing Wait Stats blog series. Idea behind Book After writing a blog series there was a good amount of request I keep on receiving that I should convert it to eBook or proper book as reading blog posts is great but it goes not give a comprehensive understanding of the subject. The very common feedback from users who were beginning the subject that they will prefer to read it in a structured method. After hearing the feedback for more than 4 months, I decided to write a book based on the blog posts. When I envisioned book, I wanted to make sure this book addresses the wait stats concepts from the fundamentals and fill the gaps of blogs I wrote earlier. Rick Morelan and Joes 2 Pros Team I must acknowledge my co-author Rick Morelan for his unconditional support in writing this book. I had already authored one book before I published this book. The experience to write the book was out of the world. Writing blog posts are much much easier than writing books. The efforts it takes to write a book is 100 times more even though the content is ready. I could have not done it myself if there was not tremendous support of my co-author and editor’s team. We spend days and days researching and discussing various concepts covered in the book. When we were in doubt we reached out to experts as well did a practical reproduction of the scenarios to validate the concepts and claims. After continuous 3 months of hard work we were able to get this book out in the community. September 1st – the lucky day Well, we had to select any day to publish the books. When book was completed in August last week we felt very glad. We all had worked hard and having a sample draft book in hand was feeling like having a newborn baby in our hand. Every time my books are published I feel the same joy which I had when my daughter was born. The feeling of holding a new book in hand is the (almost) same feeling as holding newborn baby. I am excited. For me September 1st has been the luckiest day in mind life. My daughter Shaivi was born on September 1st. Since then every September first has been excellent day and have taken me to the next step in life. I believe anything and everything I do on September 1st it is turning out to be successful and blessed. Rick and I had finished a book in the last week of August. We sent it to the publisher (printer) and asked him to take the book live as soon as possible. We did not decide on any date as we wanted the book to get out as fast as it can. Interesting enough, the publisher/printer selected September 1st for publishing the book. He published the book on 1st September and I knew it at the same time that this book will go next level. Book Model – The Most Beautiful Girl We were done with book. We had no budget left for marketing. Rick and I had a long conversation regarding how to spread the words for the book so it can reach to many people. While we were talking about marketing Rick come up with the idea that we should hire a most beautiful girl around who acknowledge our book and genuinely care for book. It was a difficult task and Rick asked me to find a more beautiful girl. I am a father and the most beautiful girl for me my daughter. This was not a difficult task for me. Rick had given me task to find the most beautiful girl and I just could not think of anyone else than my own daughter. I still do not know what Rick thought about this idea but I had already made up my mind. You can see the detailed blog post here. The Fun Experiments Book Signing Event We had lots of fun moments along this book. We have given away more books to people for free than we have sold them actually. We had done book signing events, contests, and just plain give away when we found people can be benefited from this book. There was never an intention to make money and get rich. We just wanted that more and more people know about this new concept and learn from it. Today when I look back to the earnings there is nothing much we have earned if you talk about dollars. However the best reward which we have received is the satisfaction and love of community. The amount of emails, conversations we have so far received for this book is over thousands. We had fun writing this book, it was indeed a very satisfying journey. I have earned lots of friends while learning and exploring. Availability The book is one year old but still very relevant when it is about performance tuning. It is available at various online book stores. If you have read the book, do let me know what you think of it. Amazon | Kindle | Flipkart | Indiaplaza Reference:  Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority, SQLAuthority Book Review, T SQL, Technology

  Read the article

• .NET 4.5 is an in-place replacement for .NET 4.0

  - by Rick Strahl

  With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• The hidden cost of interrupting knowledge workers

  - by Piet

  The November issue of pragpub has an interesting article on interruptions. The article is written by Brian Tarbox, who also mentions the article on his blog. I like the subtitle: ‘Simple Strategies for Avoiding Dumping Your Mental Stack’. Brian talks about the effective cost of interrupting a ‘knowledge worker’, often with trivial questions or distractions. In the eyes of the interruptor, the interruption only costs the time the interrupted had to listen to the question and give an answer. However, depending on what the interrupted was doing at the time, getting fully immersed in their task again might take up to 15-20 minutes. Enough interruptions might even cause a knowledge worker to mentally call it a day. According to this article interruptions can consume about 28% of a knowledge worker’s time, translating in a $588 billion loss for US companies each year. Looking for a new developer to join your team? Ever thought about optimizing your team’s environment and the way they work instead? Making non knowledge workers aware You can’t. Well, I haven’t succeeded yet. And believe me: I’ve tried. When you’ve got a simple way to really increase your productivity (’give me 2 hours of uninterrupted time a day’) it wouldn’t be right not to tell your boss or team-leader about it. The problem is: only productive knowledge workers seem to understand this. People who don’t fall into this category just seem to think you’re joking, being arrogant or anti-social when you tell them the interruptions can really have an impact on your productivity. Also, knowledge workers often work in a very concentrated mental state which is described here as: It is the same mindfulness as ecstatic lovemaking, the merging of two into a fluidly harmonious one. The hallmark of flow is a feeling of spontaneous joy, even rapture, while performing a task. Yes, coding can be addictive and if you’re interrupting a programmer at the wrong moment, you’re effectively bringing down a junkie from his high in just a few seconds. This can result in seemingly arrogant, almost aggressive reactions. How to make people aware of the production-cost they’re inflicting: I’ve been often pondering that question myself. The article suggests that solutions based on that question never seem to work. To be honest: I’ve never even been able to find a half decent solution for this question. People who are not in this situations just don’t understand the issue, no matter how you try to explain it. Fun (?) thing I’ve noticed: Programmers or IT people in general who don’t get this are often the kind of people who just don’t get anything done. Interrupt handling (interruption management?) IRL Have non-urgent questions handled in a non-interruptive way It helps a bit to educate people into using non-interruptive ways to ask questions: “duh, I have no idea, but I’m a bit busy here now could you put it in an email so I don’t forget?”. Eventually, a considerable amount of people will skip interrupting you and just send an email right away. Some stubborn-headed people however will continue to just interrupt you, saying “you’re 10 meters from my desk, why can’t we just talk?”. Just remember to disable your email notifications, it can be hard to resist opening your email client when you know a new email just arrived. Use Do Not Disturb signals When working in a group of programmers, often the unofficial sign you can only be interrupted for something important is to put on headphones. And when the environment is quiet enough, often people aren’t even listening to music. Otherwise music can help to block the indirect distractions (someone else talking on the phone or tapping their feet). You might get a “they’re all just surfing and listening to music”-reaction from outsiders though. Peopleware talks about a team where the no-interruption sign was placing a shawl on the desk. If I remember correctly, I am unable to locate my copy of this really excellent must-read book. If you have all standardized on the same IM tool, maybe that tool has a ‘do not disturb’ setting. Also some phone-systems have a ‘DND’ (do not disturb) setting. Hide Brian offers a number of good suggestions, some obvious like: hide away somewhere they can’t find you. Not sure how long it’ll be till someone thinks you’re just taking a nap somewhere though. Also, this often isn’t possible or your boss might not understand this. And if you really get caught taking a nap, make sure to explain that your were powernapping. Counter-act interruptions Another suggestion he offers is when you’re being interrupted to just hold up your hand, blocking the interruption, and at least giving you time to finish your sentence or your block/line of code. The last suggestion works more as a way to make it obvious to the interruptor that they really are interrupting your work and to offload some of the cost on the interruptor. In practice, this can also helps you cool down a bit so you don’t start saying nasty things to the interruptor. Unfortunately I’ve sometimes been confronted with people who just ignore this signal and keep talking, as if they’re sure that whatever they’ve got to say is really worth listening to and without a doubt more important than anything you might be doing. This behaviour usually leaves me speechless (not good when someone just asked a question). I’ve noticed that these people are usually also the first to complain when being interrupted themselves. They’re generally not very liked as colleagues, so try not to imitate their behaviour. TDD as a way to minimize recovery time I don’t like Test Driven Development. Mainly for only one reason: It interrupts flow. At least, that’s what it does for me, but maybe I’m just not grown used to TDD yet. BUT a positive effect TDD has on me when I have to work in an interruptive environment and can’t really get into the ‘flow’ (also supposedly called ‘the zone’ by software developers, although I’ve never heard it 1st hand), TDD helps me to concentrate on the tasks at hand and helps me to get back at work after an interruption. I feel when using TDD, I can get by without the need for being totally ‘in’ the project and I can be reasonably productive without obtaining ‘flow’. Do you have a suggestion on how to make people aware of the concept of ‘flow’ and the cost of interruptions? (without looking like an arrogant ass or a weirdo)

  Read the article

• Personal Development : Time, Planning , Repairs & Maintenance

  - by Rajesh Pillai

  Personal Development : Time, Planning, Repairs & Maintenance These are just my thoughts, but some you may find something interesting in it. Please think over it. We may know many things, but still we always keeps procrastinating it. I have written this as I have heard many people coming back and saying they don’t have time to do things they like. These are my thoughts buy may be useful to someone else too. Certain things in life needs periodic repairs and maintenance. To cite some examples , your CAR, your HOUSE, your personal laptop/desktop, your health etc. Likewise there are certain other things in professional life that requires repair/ maintenance /or some kind of polishing, so that you always stay on top of it. But they are not always obvious. Some of them are - Improving your communication skills - Increasing your vocabulary - Upgrading your technical skills - Pursuing your hobby - Increasing your knowledge/awareness etc… etc… And then there are certain things that we are always short of…. one is TIME. We all know TIME is one of the most precious things in life and yet we all are very miserable at managing it. Remember you can only manage it and not control it. You can only control which you own or which you create. In theory time is infinite. So, there should be abundant of it. But remember one thing, you know this, it’s not reversible. Once it has elapsed you cannot live it again. Think over it. So, how do find that golden 25th hour every day. To find the 25th hour you need to reflect back on your current daily activities. Analyze them and see where you are spending most of your time and is it really important. Even the 8 hours that you spent in the office, is it spent fruitfully. At the end of the day is the 8 precious hour that you spent was worth it. Just reflect back on your activities. Did you learn something? If yes did you make a point to NOTE IT. If you didn’t NOTED it then was the time you spent really worth it. Just ponder over it. Some calculations of your daily activities where most of the time is spent. Let’s start (in no particular order though) - Sleep (6.5 hours) [Remember you only require 6 good hours of sleep every day]. Some may thing it is 8, but it’s a myth.   o To achive 6 hours of sleep and be in good health you can practice 15 minutes of daily meditation. So effectively you can    round it to 6.5 hours. - Morning chores(2 hours) : Some may need to prepare breakfast and all other things. - Office commuting (avg. to and fro 3 hours) - Office Work (avg 9.5 hours) Total Hours: 21 hours effective time which is spent irrespective of what you do. There may be some variations here and there. Still you have 3 hours EXTRA. Where do these 3 hours go? If you can find it, then you may get that golden 25th hour out of these 3 hours. Let’s discount 2 hours for contingencies, still you have 1 hour with you. If you can’t find it then you are living a direction less life. As you can see, the 25th Hour lies within the 24 hours of the day. It’s upto each one of us to find and make use of it. Now what can you do with that 25th hour i.e. 1 hour extra of your life. Imagine the possibility. Again some calculations 1 hour daily * 30 days = 30 hours every month 30 hours pm * 12 month = 360 hours every year. 360 hours every year seems very promising. Let’s add some contingencies, say, let’s be optimistic and say 50 % contingency. Still you have 180 hours every year. That leaves with 30 minutes every day of extra time. That’s hell a lot of time, if you could manage it. These may sound like a high talk [yes, it is, unless you apply these simple rules and rationalize your everyday living and stop procrastinating]. NOTE: I haven’t taken weekend, holidays and leaves into account. So, that leaves us with a lot of buffer time. You can meet family friends, relatives, other tasks, and yet have these 180 pure hours of joy every year. Do whatever you want to do with it. So, how important is this 180 hours per year to you? Just think over it. You may use it the way you like - 50 hours [pursue your hobby like drawing, crafting, learn dance, learn juggling, learn swimming, travelling hmm.. anything you like doing and you didn’t had time to do it.] - 30 hours you can learn a new programming language or technology (i.e. you can get comfortable with it) - 50 hours [improve existing skills] - 20 hours [improve you communication skill]. Do some light reading. - 30 hours [YOU DECIDE WHAT TO DO]? So, if you had done this for one year you would have learnt a new programming language, upgraded existing skills, improved you communication etc.. If you had done this for two years.. imagine the level of personal development or growth which you may have attained….. If you had done this for three years….. NOW I think I don’t need to mention this… So, you still have TIME, as they say TIME is infinite. So, make judicious use of this precious thing. And never ever comeback saying “I don’t have time”. So, if you are RICH in TIME, everything else will be automatically taken care of, as those things may just be a byproduct of how you spend your time… So, happy TIMING your TIME everyday.

  Read the article

• Feedback on meeting of the Linux User Group of Mauritius

  Once upon a time in a country far far away... Okay, actually it's not that bad but it has been a while since the last meeting of the Linux User Group of Mauritius (LUGM). There have been plans in the past but it never really happened. Finally, Selven took the opportunity and organised a new meetup with low administrative overhead, proper scheduling on alternative dates and a small attendee's survey on the preferred option. All the pre-work was nicely executed. First, I wasn't sure whether it would be possible to attend. Luckily I got some additional information, like children should come, too, and I was sold to this community gathering. According to other long-term members of the LUGM it was the first time 'ever' that a gathering was organised outside of Quatre Bornes, and I have to admit it was great! LUGM - user group meeting on the 15.06.2013 in L'Escalier Quick overview of Linux & the LUGM With a little bit of delay the LUGM meeting officially started with a quick overview and introduction to Linux presented by Avinash. During the session he told the audience that there had been quite some activity over the island some years ago but unfortunately it had been quiet during recent times. Of course, we also spoke about the acknowledged world dominance of Linux - thanks to Android - and the interesting possibilities for countries like Mauritius. It is known that a couple of public institutions have there back-end infrastructure running on Red Hat Linux systems but the presence on the desktop is still very low. Users are simply hanging on to Windows XP and older versions of Microsoft Office. Following the introduction of the LUGM Ajay joined into the session and it quickly changed into a panel discussion with lots of interesting questions and answers, sharing of first-hand experience either on the job or in private use of Linux, and a couple of ideas about how the LUGM could promote Linux a bit more in Mauritius. It was great to get an insight into other attendee's opinion and activities. Especially taking into consideration that I'm already using Linux since around 1996/97. Frankly speaking, I bought a SuSE 4.x distribution back in those days because I couldn't achieve certain tasks on Windows NT 4.0 without spending a fortune. OpenELEC Mediacenter Next, Selven gave us decent introduction on OpenELEC: Open Embedded Linux Entertainment Center (OpenELEC) is a small Linux distribution built from scratch as a platform to turn your computer into an XBMC media center. OpenELEC is designed to make your system boot fast, and the install is so easy that anyone can turn a blank PC into a media machine in less than 15 minutes. I didn't know about it until this presentation. In the past, I was mainly attached to Video Disk Recorder (VDR) as it allows the use of satellite receiver cards very easily. Hm, somehow I'm still missing my precious HTPC that I had to leave back in Germany years ago. It was great piece of hardware and software; self-built PC in a standard HiFi-sized (43cm) black desktop casing with 2 full-featured Hauppauge DVB-s cards, an old-fashioned Voodoo graphics card, WiFi card, Pioneer slot-in DVD drive, and fully remote controlled via infra-red thanks to Debian, VDR and LIRC. With EP Guide, scheduled recordings and general multimedia centre it offered all the necessary comfort in the living room, besides a Nintendo game console; actually a GameCube at that time... But I have to admit that putting OpenELEC on a Raspberry Pi would be a cool DIY project in the near future. LUGM - our next generation of linux users (15.06.2013) Project Evil Genius (PEG) Don't be scared of the paragraph header. Ish gave us a cool explanation why he named it PEG - Project Evil Genius; it's because of the time of the day when he was scripting down his ideas to be able to build, package and provide software applications to various Linux distributions. The main influence came from openSuSE but the platform didn't cater for his needs and ideas, so he started to work out something on his own. During his passionate session he also talked about the amazing experience he had due to other Linux users from all over the world. During the next couple of days Ish promised to put his script to GitHub... Looking forward to that. Check out Ish's personal blog over at hacklog.in. Highly recommended to read. Why India? Simply because the registration fees per year for an Indian domain are approximately 20 times less than for a Mauritian domain (.mu). Exploring the beach of L'Escalier af the meeting 'After-party' at the beach of L'Escalier Puh, after such interesting sessions, ideas around Linux and good conversation during the breaks and over lunch it was time for a little break-out. Selven suggested that we all should head down to the beach of L'Escalier and get some impressions of nature down here in the south of the island. Talking about 'beach' ;-) - absolutely not comparable to the white-sanded ones here in Flic en Flac... There are no lagoons down at the south coast of Mauriitus, and watching the breaking waves is a different experience and joy after all. Unfortunately, I was a little bit worried about the thoughtless littering at such a remote location. You have to drive on natural paths through the sugar cane fields and I was really shocked by the amount of rubbish lying around almost everywhere. Sad, really sad and it concurs with Yasir's recent article on the same topic. Resumé & outlook It was a great event. I met with new people, had some good conversations, and even my children enjoyed themselves the whole day. The location was well-chosen, enough space for each and everyone, parking spaces and even a playground for the children. Also, a big "Thank You" to Selven and his helpers for the organisation and preparation of lunch. I'm kind of sure that this was an exceptional meeting of LUGM and I'm really looking forward to the next gathering of Linux geeks. Hopefully, soon. All images are courtesy of Avinash Meetoo. More pictures are available on Flickr.

  Read the article

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• System Center 2012 Service Manager change request status stuck at new

  - by Chuck Herrington

  The guy that built and setup this system left rather abruptly and I've taken over. My current issues are I have several change requests that are stuck at New. They do not move to Pending or In Progress. The system is not sending emails when incidents are getting assigned to people. This used to work on this system. I have done a lot of searching and the usual solution to this of stopping and restarting the system center services does not help. Can anyone give me any ideas of where else to look? Update: From all the searching I have done it seemed like I was at the point of re-installing. My initial installation of SCSM 2012 was on a machine that was upgraded from SCSM 2010 and also hosted SCCM 2007 and WSUS. We decided to give it a fresh start on a new server by installing a second instance of the SCSM server on a brand new 2008 R2 server then promoting the new server to the workflow master using the procedures outlined in this article - Dealing with Multiple management Servers. I've gotten to the point where we have both the old and the new server up and the new server has been promoted. I had hopped to get spammed by emails all the sudden due to the workflow taking off, but no such luck. Once all the clients are reconfigured to point to the new server we still plan to decommission the old server but at this point it seems to be that the problem is in the database. Short of any other input from the community, my next plan is to install a 180 day trial on a test server, complete with a separate database so that I can do a side by side comparison between a completely fresh install and what I have now and see if I can find any differences. While that install is running I also plan on investigating the event logs to see if there is anything in there that can shed some light on what is happening on the new server. Update 2: So I've now got a test SCSM server up with a completely fresh install including Database and it seems to be able to transition Change Requests from New to In Progress. I'm attempting to find differences between the two. Stay Tuned! Update 3: In looking through the event log on the new SCSM machine i discovered: Log Name: Operations Manager Source: OpsMgr Root Connector Date: 10/9/2013 3:48:18 PM Event ID: 28000 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: scsm02 Description: The Root connector received an exception from the SDK Service while submitting task status: Cannot set availability on a health service that doesn't exist. This lead me to Event ID 2800 logged after installing secondary server for System Center 2012 Service Manager SP1. I contacted MS to obtain the hotfix, BIG warning here, turns out the hotfix is not so "hot". In order to apply this hotfix, you have to uninstall then reinstall using the files they supply. :( This is where I am at now ... Update 4: Not much luck after the re-install. The errors in the event log have gone away on the new server but the workflows still aren't running and neither the event log nor the workflow status screen seem to indicate why. I've done a comparison of the Activity and the Change Request Event Workflows and I've removed everything from the production system that is not in my fresh test system (which is everything), shut down the services, cleared out the cache folders and restarted the services and still no joy. At the moment the only thing I can think to do is either a)nuke the entire system including the database and start over, losing all of our data in the process or b)contact MS (which is probably going to cost us a butt load of money and time in the end to only advise us to do the same thing. Maybe more idea's will come after coffee ... No answers came after coffee. Attempting to contact MS. Managed to get to their first line of defense, gave them our SA number and someone is supposed to call me back. I am trying to log into my incident on their site to update my ticket with the link to this thread but when i click on the link in the email they sent me it goes to a "Sorry, the page you requested is not available" page ... Linux is looking better and better all the time.

  Read the article

• Android RatingBar weirdness: Whenever I add a RatingBar to my layout, a bunch of the generated tags,

  - by Rben

  Whenever I use a RatingBar view in my layout, I suddenly get all kinds of compile errors. I'm using Android 2.0, but I've also tried 2.0.1, and 2.1, without joy. I also get a message: Shader 'android.graphics.BitmapShader' is not supported in Layout Editor, and an odd warning which may or maynot be related: warning: Ignoring InnerClasses attribute for an anonymous inner class that doesn't come with an associated EnclosingMethod attribute. I've tried using the RatingBar both within a tablelayout and outside it, but it behaves the same way. This is very puzzling and frustrating. Please help if you can. Sincerely, Ray Here's the XML: <!-- Created By --> <TableRow android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:text="Created by: " android:id="@+id/gi_created_label" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="right" /> <TextView android:text="Slartibartfast" android:id="@+id/gi_created" android:layout_width="fill_parent" android:layout_height="wrap_content" /> </TableRow> <!-- Verification --> <TableRow android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:id="@+id/gi_verification_label" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="right" android:text="@string/GameInfoVerificationLabelText" /> <TextView android:id="@+id/gi_verification" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="HonorSystem" /> </TableRow> <!-- Player Rating Label --> <TableRow android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="right" android:text="@string/GameInfoPlayerRatingLabel" /> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text=" " /> </TableRow> -- <!-- Times played --> <TableRow android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:id="@+id/gi_times_played_label" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="right" android:text="@string/GameInfoTimesPlayedLabel" /> <TextView android:id="@+id/gi_times_played" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="999" /> </TableRow> <!-- Total Players --> <TableRow android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:id="@+id/gi_total_players_label" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="right" android:text="@string/GameInfoTotalPlayerCountLabel" /> <TextView android:id="@+id/gi_total_players" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="999" /> </TableRow> <!-- Total Cancelations --> <TableRow android:layout_height="wrap_content" android:layout_width="fill_parent" > <TextView android:id="@+id/gi_total_cancelations_label" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="right" android:text="@string/GameInfoTotalCancelsLabel" /> <TextView android:id="@+id/gi_total_cancels" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="999" /> </TableRow> <RatingBar android:id="@+/gi_player_rating" style="?android:attr/ratingBarStyleSmall" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_span="2" android:isIndicator="true" android:numStars="5" android:rating="3" android:stepSize="1" android:layout_gravity="center_vertical" /> </TableRow>

  Read the article

• Windows CE Programming Serial Port - Getting Garbled Output

  - by user576639

  I am programming a Windows CE 6 device (Motorola MC3100 scanner Terminal). Using Lazarus FPC to compile it. After 3 weeks work I reluctantly post here in the hope someone can suggest why I am getting garbled output from the serial port. The code I am using is posted below. This is the standard code I have found from several places. The OpenPort works OK. When I send the string using SendString('ABCDEF') I get garbled input to the PC Serial port such as: 4[#131][#26][#0][#0][#0][#0] (the bracketed data indicates that it is a non-printable character ASCII Code) Obviously it is connecting to the port OK AND it is sending the correct no of characters (7). I have tried all combinations of Baud Rate, Data Bits, Parity and Stop Bits without any joy. Also tried changing cable, on a different PC etc. Could it be I need to set something else in the DCB? Any help or suggestions would be GREATLY appreciated. unit Unit1; {$mode objfpc}{$H+} interface uses Classes, SysUtils, FileUtil, Forms, Controls, Graphics, Dialogs, StdCtrls, ExtCtrls, Windows, LResources; type { TForm1 } TForm1 = class(TForm) Button1: TButton; Button2: TButton; Label1: TLabel; procedure Button1Click(Sender: TObject); procedure Button2Click(Sender: TObject); function OpenPort(ComPort:String;BaudRate,ByteSize,Parity,StopBits:integer):String; procedure SendString(str:String); private { private declarations } public { public declarations } end; var Form1: TForm1; cc:TCOMMCONFIG; Connected:Boolean; implementation {$R *.lfm} var F: TextFile; var hComm: THandle; str: String; lrc: LongWord; { TForm1 } function OpenPort(ComPort:String;BaudRate,ByteSize,Parity,StopBits:integer):String; var cc:TCOMMCONFIG; SWide:WideString; Port:LPCWSTR; begin SWide:=ComPort; Port:=PWideChar(SWide); result:=''; if (1=1) then begin Connected:=False; hComm:=CreateFile(Port, GENERIC_READ or GENERIC_WRITE,0, nil,OPEN_EXISTING,0,0); if (hComm = INVALID_HANDLE_VALUE) then begin ShowMessage('Fail to Open'); exit; end; GetCommState(hComm,cc.dcb); cc.dcb.BaudRate:=BaudRate; cc.dcb.ByteSize:=ByteSize; cc.dcb.Parity:=Parity; cc.dcb.StopBits:=StopBits; if not SetCommState(hComm, cc.dcb) then begin result:='SetCommState Error!'; CloseHandle(hComm); exit; end; Connected:=True; end; end; procedure TForm1.Button1Click(Sender: TObject); begin OpenPort('COM1:',9600,8,0,0); end; procedure TForm1.Button2Click(Sender: TObject); begin SendString('ABCDEFG'); end; procedure TForm1.SendString(str:String); var lrc:LongWord; begin if (hComm=0) then exit; try if not PurgeComm(hComm, PURGE_TXABORT or PURGE_TXCLEAR) then raise Exception.Create('Unable to purge com: '); except Exit; end; WriteFile(hComm,str,Length(str), lrc, nil); end; end.

  Read the article

• Jquery getJSON cross domain problems

  - by Charlie

  I cant seem to get my JSON file to work when pulling it in from another domain using JQuerys getJSON. I have placed the callback part at the end of the url but still have no joy. Firebug tells me its a cross domain issue, which seems to make sense as if I place the json file locally the below code (excluding the ?jsoncallback=? works fine) Heres the Jquery part $.getJSON("http://anotherdomain/js/morearticles.js?jsoncallback=?", function(json){ if (show5More.nextSetCount ' + this.titletext + '' + this.paratext + '').appendTo("#lineupswitch"); } else { $('' + this.titletext + '' + this.paratext + '').appendTo("#lineupswitch"); } }); return false; } }); } }); } And the JSON, which I have validated. { "items": [ [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "Cannabis plants found in house with neglected children", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "Multi-million pound revamp for Waverley Station", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "SANDS Lothian are hoping to highlight their", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "" }, { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "lastlineup" } ], [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "2", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "3", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "4", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "lastlineup" } ] ] } { "items": [ [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "Cannabis plants found in house with neglected children", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "Multi-million pound revamp for Waverley Station", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "SANDS Lothian are hoping to highlight their", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "" }, { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "lastlineup" } ], [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "2", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "3", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "4", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "lastlineup" } ] ] }

  Read the article

• ASP.NET - Call required field validator before AJAX modalpopup, client side

  - by odinel

  I have an ASP.NET/C# application. The user fills out a form with required fields, then clicks a submit button. An AJAX popup message is then displayed, and if they confirm, their information is posted back to the server. The problem is that the AJAX popup is fired BEFORE the req validator. I need to interrupt this and run the req validator, and then if successful show the popup. I know the req validator is working, because if you cancel the popup message, the req text is shown next to the fields. Textbox and AJAX control code is here: <table> <tr> <td>Name</td> <td> <asp:TextBox ID="txtName" runat="server" CssClass="textBox" AutoPostBack="true"></asp:TextBox> <asp:RequiredFieldValidator ID="reqName" runat="server" Text="*" ControlToValidate="txtName" ValidationGroup="trade" ForeColor="White"></asp:RequiredFieldValidator> </td> </tr> <tr> <td>Address</td> <td> <asp:TextBox ID="txtAdd1" runat="server" CssClass="textBox"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" Text="*" ControlToValidate="txtAdd1" ValidationGroup="trade" ForeColor="White"></asp:RequiredFieldValidator> </td> </tr> <tr> <td></td> <td> <asp:Button ID="btnSubmitEnquiry" runat="server" CssClass="buttonText" Text="Submit Enquiry" ValidationGroup="trade" /> </td> </tr> </table> <ajax:ModalPopupExtender ID="ModalPopupExtender1" runat="server" okcontrolid="lnkCancel" targetcontrolid="btnSubmitEnquiry" popupcontrolid="pnlConfirm" popupdraghandlecontrolid="PopupHeader" drag="true" ></ajax:ModalPopupExtender> <asp:Button Text="targetbutton" ID="btnConfTgt" runat="server" Style="display: none" /> <asp:Panel ID="pnlConfirm" style="display:none" runat="server"> <div class="PopupContainer"> <div class="PopupBody"> <br /> <div align="center"> <asp:label ID="Label1" runat="server" CssClass="lblConfirmpopup"> Message goes here </asp:label> </div> <br /><br /><br /> <div align="center"> <asp:LinkButton ID="lnkCancel" runat="server" visible="true" Text="Cancel" CommandName="Update" BorderColor="#FFFFFF" BackColor="#000000" BorderWidth="3" BorderStyle="Double" ForeColor="White" Font-Size="13pt" Font-Underline="False"></asp:LinkButton> <asp:LinkButton ID="lnkConfirm" runat="server" visible="true" Text="Submit Enquiry" CommandName="Update" BorderColor="#FFFFFF" BackColor="#000000" BorderWidth="3" BorderStyle="Double" ForeColor="White" Font-Size="13pt" Font-Underline="False" OnClick="btnSubmitEnquiry_Click"></asp:LinkButton> </div> </div> </div> </asp:Panel> I've tried coding the first submit button to call the client-side req validator method, but no joy; it still shows the popup before the req validator. If there's no simple solution, I was thinking of perhaps an 'outside the box' solution, maybe hiding the initial Submit button after the req validation has passed, then showing an additional button with the popup control attached to it. Not sure how I'd be able to achieve this though. Thanks

  Read the article

• many-to-many-to-many, incl alignment of data from diff sources

  - by JefeCoon

  Re-factoring dbase to support many:many:many. At the second and third levels we need to preserve end-user 'mapping' or aligning of data from different sources, e.g. Order 17 FirstpartyOrderID => aha LineItem_for_BigShinyThingy => AA-1 # maps to 77-a LineItem_for_BigShinyThingy => AA-2 # maps to 77-b, 77-c LineItem_for_LittleWidget => AA-x # maps to 77-zulu, 77-alpha, 99-foxtrot LineItem_for_LittleWidget => AA-y # maps to 77-zulu, 99-foxtrot LineItem_for_LittleWidget => AA-z # maps to 77-alpha ThirdpartyOrderID => foo LineItem_for_BigShinyThingy => 77-a LineItem_for_BigShinyThingy => 77-b LineItem_for_BigShinyThingy => 77-c LineItem_for_LittleWidget => 77-zulu LineItem_for_LittleWidget => 77-alpha ThirdpartyOrderID => bar LineItem_for_LittleWidget => 99-foxtrot Each LineItem has daily datapoints reported from its own source (Firstparty|Thirdparty). In our UI & app we provide tools to align these, then we'd like to save them into the cleanest possible schema for querying, enabling us to diff the reported daily datapoints, and perform other daily calculations (which we'll store in the dbase also, fortunately that should be cake once we've nailed this). We need to map related [firstparty|thirdparty]line_items which have their own respective datapoints. We'll be using the association to pull each line_items collection of datapoints for summary and discrepancy calculations. I'm considering two options, std has_many,through x2 --or-- possibly (scary) ubermasterjoin table OptionA: order<<-->> order_join_table[id,order_id,firstparty_order_id,thirdparty_order_id] <<-->>line_item order_join_table[firstparty_order_id]-->raw_order[id] order_join_table[thirdparty_order_id]-->raw_order[id] raw_order-->raw_line_items[raw_order_id] line_item<<-->> line_item_join[id,LI_join_id,firstparty_LI,thirdparty_LI <<-->>raw_line_items line_item_join[firstparty_LI]-->raw_line_item[id] line_item_join[thirdparty_LI]-->raw_line_item[id] raw_line_item<<-->>datapoints = we rely upon join to store all mappings of first|third orders & line_items = keys to raw_* enable lookup of these order & line_item details = concerns about circular references and/or lack of correct mapping logic, e.g order--line_item--raw_line_items vs. order--raw_order--raw_line_items OptionB: order<<-->> join_master[id,order_id,FP_order_id,TP_order_id,FP_line_item_id,TP_line_item_id] join_master[FP_order_id & TP_order_id]-->raw_order[id] join_master[FP_line_item_id & TP_line_item_id]-->raw_line_item[id] = every combo of FP_line_item + TP_line_item writes a record into the join_master table = "theoretically" queries easy/fast/flexible/sexy At long last, my questions: a) any learnings from painful firsthand experience about how best to implement/tune/optimize many-to-many-to-many relationships b) in rails? c) any painful gotchas (circular references, slow queries, spaghetti-monsters) to watch out for? d) any joy & goodness in Rails3 that makes this magically easy & joyful? e) anyone written the "how to do many-to-many-to-many schema in Rails and make it fast & sexy?" tutorial that I somehow haven't found? If not, I'll follow up with our learnings in the hope it's helpful.. Thanks in advance- --Jeff

  Read the article

• onDraw() triggered but results don't show

  - by Don

  I have the following routine in a subclass of view: It calculates an array of points that make up a line, then erases the previous lines, then draws the new lines (impact refers to the width in pixels drawn with multiple lines). The line is your basic bell curve, squeezed or stretched by variance and x-factor. Unfortunately, nothing shows on the screen. A previous version with drawPoint() and no array worked, and I've verified the array contents are being loaded correctly, and I can see that my onDraw() is being triggered. Any ideas why it might not be drawn? Thanks in advance! protected void drawNewLine( int maxx, int maxy, Canvas canvas, int impact, double variance, double xFactor, int color) { // impact = 2 to 8; xFactor between 4 and 20; variance between 0.2 and 5 double x = 0; double y = 0; int cx = maxx / 2; int cy = maxy / 2; int mu = cx; int index = 0; points[maxx<<1][1] = points[maxx<<1][0]; for (x = 0; x < maxx; x++) { points[index][1] = points[index][0]; points[index][0] = (float) x; Log.i(DEBUG_TAG, "x: " + x); index++; double root = 1.0 / (Math.sqrt(2 * Math.PI * variance)); double exponent = -1.0 * (Math.pow(((x - mu)/maxx*xFactor), 2) / (2 * variance)); double ePow = Math.exp(exponent); y = Math.round(cy * root * ePow); points[index][1] = points[index][0]; points[index][0] = (float) (maxy - y - OFFSET); index++; } points[maxx<<1][0] = (float) impact; for (int line = 0; line < points[maxx<<1][1]; line++) { for (int pt = 0; pt < (maxx<<1); pt++) { pointsToPaint[pt] = points[pt][1]; } for (int skip = 1; skip < (maxx<<1); skip = skip + 2) pointsToPaint[skip] = pointsToPaint[skip] + line; myLinePaint.setColor(Color.BLACK); canvas.drawLines(pointsToPaint, bLinePaint); // draw over old lines w/blk } for (int line = 0; line < points[maxx<<1][0]; line++) { for (int pt = 0; pt < maxx<<1; pt++) { pointsToPaint[pt] = points[pt][0]; } for (int skip = 1; skip < maxx<<1; skip = skip + 2) pointsToPaint[skip] = pointsToPaint[skip] + line; myLinePaint.setColor(color); canvas.drawLines(pointsToPaint, myLinePaint); / new color } } update: Replaced the drawLines() with drawPoint() in loop, still no joy for (int p = 0; p<pointsToPaint.length; p = p + 2) { Log.i(DEBUG_TAG, "x " + pointsToPaint[p] + " y " + pointsToPaint[p+1]); canvas.drawPoint(pointsToPaint[p], pointsToPaint[p+1], myLinePaint); } /// canvas.drawLines(pointsToPaint, myLinePaint);

  Read the article

• Letter to Ballmer: Making Better Consumer Devices

  - by andrewbrust

  Last year, I wrote Steve Ballmer an email, and he was kind enough to write me back.  The email contained a scan of a column I wrote praising Microsoft’s BI strategy.  His reply contained three simple words: “Super nice  thanks.” Well, now I’d like to write to Steve again, in an open letter format, and this time the love may be a bit tougher.  But I’m still super earnest. The past two days have been eventful ones for Microsoft: The company announced the departure of company veterans Robbie Bach and J Allard and the market announced Apple is now besting Microsoft in market capitalization. Plus, announcements were made that make it plain that Ballmer will, in effect, be running Microsoft’s Entertainment & Devices division himself. With that in mind, I’d like to offer my list of a dozen things I think Microsoft’s CEO should do to improve that division’s offerings and, hopefully, its bottom line. So here goes:   1. On Windows Phone 7, Stay the Course The press is teeming with headlines and reader comments proclaiming the death-before-arrival of Windows Phone 7.  That’s plain silly.  You’ve got the makings of a great and unique SmartPhone platform, and you’re the only company (even considering RIM) that can offer full fidelity Exchange integration, not to mention implementing Office on the device.  Let the existing team finish this puppy and ship it. And then have them pump out a few updates, over-the-air, quickly.  Show them that Google Android’s not the only product that can do good, rapid dot releases. And another thing: make sure your OEMs’ devices have flawless touch screens.  If they don’t, then you shouldn’t certify them for delivery to customers.  Period. Oh, and kill the Kin, quietly.  It was DOA, and you know it.   2. Move Media Center to the Xbox Platform Media Center is, at its core, a good product.  But delivering a media distribution and DVR platform on a sophisticated PC operating system like Windows 7 just creates too many moving parts.  Xbox already functions as the best Media Center extender device – it should actually be the hub as well. Media Center is mostly based on .NET code – and XNA is a .NET environment for Xbox – find a way to bridge that small gap and make Media Center a joy to work with instead of a frustration.  Beating Apple TV out of this sub-market is the lowest hanging fruit on the tree (goofy pun, but it’s true).   3. Integrate Media Center with Mediaroom, or Kill the Latter You have two media products with almost identical names.  One is for standalone DVRs and the other is for IPTV cable set tops with DVR capabilities.  Can we merge these please?  My previous request of putting Media Center on Xbox would seem to tie into this nicely, since you’ve announced plans to do that with Mediaroom already.   4. Fix the Red Ring of Death People love the Xbox, but they really don’t love sending their consoles back every 18-24 months, when they get a bunch of red lights flashing on power up.  You’ve handled this defect about as gracefully as possible, but it’s been around for a long time now and it doesn’t seem to be fixed yet.  You can do better.  In fact, you must do better, or you insult your customers.   5. Add Blu Ray to Xbox I know, streaming movies are the future; physical media is legacy technology.  So if that’s true, why did you back HD DVD so hard?  You know why: for now, the film studios won’t allow a large selection of new release, HD, surround sound content be distributed on any medium other than Blu Ray or cable pay per view/on-demand.  Don’t you want home theater buffs to see the Xbox as a fantastic device for their rigs?  Don’t you want to put PlayStation 3 out of its misery?  And if you follow my suggestions above (move Media Center to the Xbox and fix the Red Ring problem), you’d have it all sewn up.  Do I think Blu Ray functionality will move a lot of units?  No.  Do I think that it would move more units with desperately needed influential home theater consumers?  You bet.  And you might sell more ZunePass subscriptions in the process. But while you’re at it, make the fan quieter, please.   6. Make More of Windows Home Server Home Server is a fantastic product.  And for reasons unknown to me, it seems like you’re letting it languish.  Development of the add-in ecosystem seems underfunded.  WHS’ unparalleled ease of use and reliability for home PC backup (and emergency restores) goes unsung.  Product cycles are slow.  Support for your OEMs, who are doing great work, especially in the green space with Atom CPUs, seems lacking.  You’ve married a trophy girl and you keep her cloistered at home!  That’s cruel, unusual and, um, incredibly ill-advised.  Make use of this ace card, and while you’re at it, give it real integration with Media Center.  The integration thus far proof-of-concept quality.  You should go way past that – both products will benefit immeasurably.   7. Set Up a Partner Platform for Custom Installers There’s a whole sub-industry of companies that install, integrate and configure home theater, security and connected home products.  They have an industry group. They are influential in the high-end of the consumer electronics industry, and so are their customers.  They love Media Center and they love Windows Home Server.  But I have talked to several of them at the Consumer Electronics Show and they tell me you don’t love them.  They find it very difficult to do business with Microsoft, even though they want nothing more than to sell and evangelize your platform.  This is a travesty.  Please fix it.  Get Allison Watson and the Microsoft Partner Network on board and have her hire someone who knows how to run a channel program for consumer electronics companies.  Problem solved.  Markets expanded.   8. Make Your Own Hardware In other areas, I know you love your partners.  I help run one, so I appreciate that.  But when it came to Xbox and Zune you built them it yourself (albeit on a contract basis, which is fine).  Windows Phone 7 has a chance to work as an OEM play, but it would work better if you produced the devices.  At least consider building a reference device that sells alongside your OEMs’ offerings.  That’s what Google did with the Nexxus One.  And while that phone was not itself a big seller, it catalyzed two wonderful things : (1) a quality bar was set and (2) partners exceeded it.  Before the Nexxus One, the best Android handset out there was the Motorola Droid. The Nexxus One was better, and the HTC Droid Incredible and Evo 4G are now even better than Google’s phone, which is why Verizon and Sprint decided not to carry it.  Imagine if all Windows Phone 6.x devices were on par with the HTC HD2.  I tend to believe you’d have a lot bigger market share than you do now.   9. Continue with Your Retail Initiative From what I hear, it sounds like it’s going well.  And this goes right along with making your own hardware.  When you build it, they will come.  And then it makes the likes of Best Buy and Staples do better.   10. Make an Acquisition (or Two) TiVo and/or Moxi look ripe for the picking.  With their ability to build stuff people love and your ability to run a business, you might just have something.  But do a better job than you did when you bought Danger.  Buy the ideas, not just the customers, eh?   11. Make Beautiful Stuff You’ve heard this one before, I know.  But I have some head-shrinking advice on this one.  You know that Apple obsesses over its industrial design.  You know that appeals to consumers.  But it seems you think doing so is Apple’s game exclusively and so you shouldn’t even try.  Bull dinky.  Come to New York and visit the Museum of Modern Art’s Architecture and Design gallery.  You’ll see that lots of companies and product categories have had very high design value well before Apple existed.  You can do this, and the Zune HD was a great start.  Now run with that.  Find those negative voices in your head that are telling you that you can’t and shut them up.  For good.   12. Burst the Bubble Some of the products you’ve built seem like they were conceived in a bizarro world.  That would appear to be the result of groupthink.  You must do better.  And there’s lots of people willing to advise you.  This includes just about everyone in the Regional Director program, and probably a bunch of MVPs.  Heck, I bet the guys at Engadget could help out too.  Imagine if you let them see the Kin before it shipped.  Talk to high-end gear consumers.  Talk to Best Buy and CostCo customers too.   Signing Off I hope this was of value to you.  As I wrote this I kept telling myself how obvious, even trite, some of these pieces of advice were and then, because of that, doubting they’d really help.  But I decided that they must not be obvious to Microsoft.  Sometimes when you get wrapped up in stuff, it’s hard to clear your head.  I think my head’s pretty clear here though (I’m wrapped up in other stuff), so maybe my perspective can help.  If not, well, then, I guess they all can’t be super nice.

  Read the article

< Previous Page | 12 13 14 15 16 17  | Next Page >