Search Results

Search found 1379 results on 56 pages for 'forwarding'.

Page 16/56 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Added autossh in rc.local, but the dynamic port forwarding won't work

    - by rankjie
    I am using Rasbian on my newly arrived Rasp.Pi, and decided to make it my own proxy server. Now I need to set up a ssh tunnel on the Pi to my Linode server, and make it auto start with the system. What did I do: Add this line to /etc/rc.local autossh -f theRemoteServer -N -D 5555 -L 1234:localhost:22 After I reboot, I found out that I can't use the localhost:5555 as a socks proxy. So I type the command ps -A | grep ssh then I can see the autossh and ssh all running: pi@raspberrypi ~ $ ps -A | grep ssh 2018 ? 00:00:00 sshd 2116 ? 00:00:00 autossh 2119 ? 00:00:00 sshd 2195 ? 00:00:00 sshd 3173 ? 00:00:00 ssh (I've installed autossh, and the command works if I type it manually.) (I use the passwordless key auth, so I don't have to enter password.) Much appreciated and sorry for my poor English.

    Read the article

  • Forwarding wifi traffic to wired pc

    - by brydgesk
    I'm trying to play around with Wireshark on my home network, and was wondering if there is a way to create a new connection on my PC that receives all wifi packets on the network. The PC is a wired Windows 7 machine, and I'm using DD-WRT on an Asus RT-N16 router. I'm not trying to hack anything, I have full admin access to the router itself. My searching has led me to articles about client bridges and repeater bridges, but none of them seemed to apply entirely to my situation. I'd like to continue using my standard wifi connection, but make my PC act as a repeater that receives all wifi traffic. Again, the PC has no wireless connection. I've used tcpdump which is installed on the router itself, but I'd be more comfortable analyzing the packets in Windows, as I'm trying to learn Wireshark. Thanks

    Read the article

  • Email forwarding from my domain to gmail - FAIL

    - by pitosalas
    [There are numerous similar questions on ServerFault but I couldn't find one that was exactly on point] Background: I use Gmail for my email client. My email is [email protected]. However the email that people communicate to me with is [email protected]. I run the server that hosts www.example.com and other domains, at ServerBeach. Up to yesterday, I had SENDMAIL painlessly just forward emails to [email protected] to [email protected] and everything was fine, for several years in fact. Suddenly my email stopped working - that is, my gmail account stopped receiving emails via the forward from my server. Looking into it I found a bunch of emails sitting on my server with content like this: ... while talking to gmail-smtp-in.l.google.com.: RCPT To: <<< 450-4.2.1 The user you are trying to contact is receiving mail at a rate that <<< 450-4.2.1 prevents additional messages from being delivered. Please resend your <<< 450-4.2.1 message at a later time. If the user is able to receive mail at that <<< 450-4.2.1 time, your message will be delivered. For more information, please <<< 450 4.2.1 visit xxxxxx://mail.google.com/support/bin/answer.py?answer=6592 u15si37138086qco.76 [email protected]... Deferred: 450-4.2.1 The user you are trying to contact is receiving mail at a rate that DATA <<< 550-5.7.1 [64.34.168.137 1] Our system has detected an unusual rate of <<< 550-5.7.1 unsolicited mail originating from your IP address. To protect our <<< 550-5.7.1 users from spam, mail sent from your IP address has been blocked. <<< 550-5.7.1 Please visit xxxxx://www.google.com/mail/help/bulk_mail.html to review <<< 550 5.7.1 our Bulk Email Senders Guidelines. u15si37138086qco.76 554 5.0.0 Service unavailable ... while talking to alt1.gmail-smtp-in.l.google.com.: From what I've been researching, I think somehow someone has/is hijacking my domain name or something and this somehow has caused gmail's servers to notice and cut me off. But I don't know really what's going on nor do I see whatever emails might be involved. I've read stuff on zoneedit.com that sounds like they might have a solution in their service for what I am trying to do. I also read a lot about admining DNS and SENDMAIL and tried various things, but nothing works. Can you tell from my description what is going on that caused GMail's server to stop accepting email from my server and is there a way to stop it? What is the 'correct' way to configure things so that emails to [email protected] behave as if they were sent to [email protected]? Thanks so much!

    Read the article

  • Problems forwarding zone to another DNS server.

    - by sebastian nielsen
    I have a authorative DNS server at 83.248.21.18 which are authorative for the domain "finahemgoteborg.se". Now my registrar is requiring me to have 2 DNS servers for the domain, so I would now want the machine 85.228.103.141 just forward all incoming queries for "finahemgoteborg.se" to the 83.248.21.18 server. In the 85.228.103.141 BIND server, I have the following config: zone "finahemgoteborg.se" in { type forward; forwarders {83.248.21.18;}; }; But the problem is that 85.228.103.141 is still responding with "REFUSED" when querying it for example www.finahemgoteborg.se A record. How can I fix it. I do NOT want to set up a master/slave situation, just one nameserver that forwards to a another. Edit The Rest of named.conf: options { directory "/var/cache/bind"; version "none"; allow-recursion {"none";}; minimal-responses no; }; zone "sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns1sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns2sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "finahemgoteborg.se" in{ type forward; forwarders {83.248.21.18;}; };

    Read the article

  • DNS Records: Forwarding a port on my public domain

    - by marienbad
    I've set up an MX record for a local mailserver before, but I've never done this... I want to set up my public domain (registered by Dreamhost) to accept IPP (Internet Printing Protocol) jobs and send them to the IPP LaserJet printer on my home LAN. IPP uses port 631. What do I put in my DNS records?

    Read the article

  • Forwarding emails to nonexisting users/aliases to external mail server

    - by Niclas Lindqvist
    I'm in the works of installing a postfix mailserver on a machine currently being used as web server. As of right now, I've got it working as far as that I can send and receive emails using telnet through port 25. However, as my customer is concerned with downtime, I'd like to setup all the accounts one by one over time, and making sure it works, rather than just cutting the cord to the old mail server and start creating new accounts on the new system. How can I add the domain customer.com to my mail server and just add something like [email protected] to the users and aliases-lists without the web server trying to send all emails with the @customer.com domain to the new mail server? I'm running ubuntu, using postfix and postfix-mysql on the new machine, the old mail server is on a hosted environment somewhere else, where I don't have any control.

    Read the article

  • Mechanism behind user forwarding in ScriptAliasMatch

    - by jolivier
    I am following this tutorial to setup gitolite and at some point the following ScriptAliasMatch is used: ScriptAliasMatch \ "(?x)^/(.*/(HEAD | \ info/refs | \ objects/(info/[^/]+ | \ [0-9a-f]{2}/[0-9a-f]{38} | \ pack/pack-[0-9a-f]{40}\.(pack|idx)) | \ git-(upload|receive)-pack))$" \ /var/www/bin/gitolite-suexec-wrapper.sh/$1 And the target script starts with USER=$1 So I am guessing this is used to forward the user name from apache to the suexec script (which indeed requires it). But I cannot see how this is done. The ScriptAliasMatch documentation makes me think that the /$1 will be replaced by the first matching group of the regexp before it. For me it captures from (?x)^/(.* to ))$ so there is nothing about a user here. My underlying problem is that USER is empty in my script so I get no authorizations in gitolite. I give my username to apache via a basic authentication: <Location /> # Crowd auth AuthType Basic AuthName "Git repositories" ... Require valid-user </Location> defined just under the previous ScriptAliasMatch. So I am really wondering how this is supposed to work and what part of the mechanism I missed so that I don't retrieve the user in my script.

    Read the article

  • Forwarding 80 to 443 on Nagios woes

    - by Ethabelle
    I perhaps just need some extra insight because I don't see where I'm going wrong. I used an SSL Cert to secure our nagios server. We want to specifically require all traffic over nagios (like 2 users, lol) to use SSL. So I thought, oh, mod_rewrite + Rewrite Rule in .htaccess, right? So I went into the DocumentRoot and did a vi .htaccess (one didn't already exist) and then I put in the following rule; RewriteEngine On RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://our.server.org/$1 [R,L] This does absolutely nothing. Does nada. Whhhyy.. Note: AllowOverride all in httpd.conf is on. Also, I verified that the module is not uncommented out ... but note, I couldn't find the mod_rewrite module installed so I copied it over from another server and placed it in modules/mod_rewrite.so . It was weird because it was enabled in the httpd.conf file, but then didn't exist in modules ... I'm a baddie :(

    Read the article

  • How to take a call without forwarding it

    - by ageis23
    Hi I have a traditional telephony system at home. I also got an voip ATA device connected to the telephone socket. On a normal phone you can just plug it into the wall socket then multiple people on different phones can speak a the same time. Currently for me to take this call whoever answered the call will forward it onto my internal number. Is there not a way I can make it work like the analogue system so I can just pick up the phone?

    Read the article

  • How do I detect call forwarding in Asterisk?

    - by jibcage
    Basically, I want to do the same thing that Google Voice does. I forward my calls to a DID number that rings my Asterisk server via IAX2, which, if it detects the call has been forwarded, sends it to voicemail. Otherwise, if the call hasn't been forwarded (and somebody has dialed the DID number), it dials my phone number and tries to reach me. tl;dr: how do I detect that a call has been forwarded to my asterisk box?

    Read the article

  • X11 forwarding from one server to other

    - by n3oblit7
    I have a setup where I need to forward X11 from my local machine (laptop) to a Virtual machine. The server hosting this VM cannot be reached directly from my laptop. I need to first login to a gateway and from this gateway, I can access the VM. How can I forward X11 from my laptop to this VM? I have tried following but these do not work: [laptop # ] ssh -X [gateway] [gateway # ] ssh -X [VM] [laptop # ] ssh -tX [gateway] ssh -X [VM] I could forward X11 only till the gateway. (DISPLAY variable gets set on gateway)

    Read the article

  • Squid proxy server not forwarding traffic

    - by DilbertDave
    I'm trying to set up a web filtering system (dans guardian) on my home network but am failing at the first hurdle - configuring the Squid Proxy server. No matter what I do I cannot seem to configure it properly and I just receive the 'Requested URL could not be received' error page. If I remove the proxy setting on the browser everything works normally. Ultimately I want to run this on something like a Raspberry Pi but at the moment I'm testing with a virtual machine (although efforts with a netbook were equally unsuccessful). The VM has a clean installation of Linux Mint 15 and I've installed squid via apt-get. I've followed numerous walkthroughs but this on (https://help.ubuntu.com/lts/serverguide/squid.html) pretty much sums up the process I've been taking. I'm obviously missing something but cannot figure it out - any assistance appreciated.

    Read the article

  • port forwarding using 3 static ip addresses

    - by Danny
    I am new to configuring routers. We have purchased a RV016 Cisco business router that has multiwan capability. What we are attempting to do is take map services from 3 different servers and assign 3 different static IP addresses and then forward port 80 through the router. A short term solution to building a proxy server. Is this possible? Right now we have a consumer grade Cisco router and assign a static IP and it works, we attempted the same settings on the business router and cannot get to the internet. We set it DHCP and it works fine, however we want to to forward the static ports not use DHCP.

    Read the article

  • Domain Forwarding | A Magento Store

    - by WaZ
    I have installed Magento inside a folder called magento. The URL of the site currently looks like this: http://gios.azamdevelopment.co.uk/magento/ We want our domain forwarded to the above URL and moreover, any links relative should work as well. e.g. http://gios.azamdevelopment.co.uk/magento/customer/account/login/ should ideally be www.giosconcept.com/customer/account/login and so forth. Thanks very much.

    Read the article

  • Domain Forwarding | A Magento Store

    - by WaZ
    I have installed Magento inside a folder called magento. The URL of the site currently looks like this: http://gios.azamdevelopment.co.uk/magento/ We want our domain forwarded to the above URL and moreover, any links relative should work as well. e.g. http://gios.azamdevelopment.co.uk/magento/customer/account/login/ should ideally be www.giosconcept.com/customer/account/login and so forth. Thanks very much.

    Read the article

  • Advanced call forwarding in Skype

    - by Ivan
    Hi all, I'd like to forward calls from a Skype account to another Skype account (both online), but so that it calls and then enters a number. E.g., I have two accounts: acc1 and acc2. I want all calls from acc1 to be forwarded to acc2, and when the call is established to enter "#123". Is that possible? Thanks. EDIT: The question is basically how to call a user and add the extension directly, before the call has been established (e.g., to call directly acc2:#123).

    Read the article

  • Apache forwarding to tomcat shows a blank page

    - by MNS
    I have an application running on tomcat at http ://www.example.com:9090/mycontext. The host name in server.xml points to www .example.com. I do not have localhost anymore. I am using apache to forward requests to tomcat using mod_proxy. Things work fine as long as the ProxyPath is /mycontext. The server name setup in virtual host is www .abc.com and http ://www.abc.com/mycontext works fine. However I would like to ignore the context path and simply use http://www.abc.com/ to forward requests to http://www.example.com:9090/mycontext. When I do this, apache shows me a blank page. What am I missing here? I have not changed anything in server.xml except the default host to www .example.com. <VirtualHost *:80> ServerName www.abc.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://www.example.com:9090/mycontext ProxyPassReverse / http://www.example.com:9090/mycontext </VirtualHost> Thanks

    Read the article

  • Preventing endless forwarding with two routers

    - by jarmund
    The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device explaination H1: Host with IP 192.168.111.47 GW1: Linux box with IPs 192.168.111.1 and 192.168.99.2, as well as its own route to the internet. GW2: Generic wireless router with IP 192.168.99.1 and its own route to the internet. Inet1 & Inet2: Two possible routes to the internet In short: H has more than one possible route to the internet. H is supposed to only access the internet via GW2 when that link is up, so GW1 has some policy based routing special just for H1: ip rule add from 192.168.111.47 table 991 ip route add default via 192.168.99.1 table 991 While this works as long as GW2 has a direct link to the internet, the problem occurs when that link is down. What then happens is that GW2 forwards the packet back to GW1, which again forwards back to GW2, creating an endless loop of TCP-pingpong. The preferred result would be that the packet was just dropped. Is there something that can be done with iptables on GW1 to prevent this? Basically, an iptables-friendly version of "If packet comes from GW2, but originated from H1, drop it" Note1: It is preferable not to change anything on GW2. Note2: H1 needs to be able to talk to both GW1 and GW2, and vice versa, but only GW2 should lead to the internet TLDR; H1 should only be allowed internet access via GW2, but still needs to be able to talk to both GW1 and GW2. EDIT: The interfaces for GW1 are br0.105 for the '99' network, and br0.111 for the '111' network. The sollution may or may not be obnoxiously simple, but i have not been able to produce the proper iptables syntax myself, so help would be most appreciated. PS: This is a follow-up question from this question

    Read the article

  • iptables rule for forwarding outbound traffic

    - by Claudiu
    I am trying to forward the outbound traffic to another server. Current rule is: /sbin/iptables -A OUTPUT -p tcp -s localhost -o 91.xxx.xxx.xxx --dport 65000:65010 -j ACCEPT but when I do a iptables -L, the rule its showed like this: ACCEPT tcp -- localhost.localdomain anywhere tcp dpts:65000:65010 So I guess my rule is bad written since the "destination" column shows "anywhere" Can you help me with this?

    Read the article

  • Forwarding subdomain to different port on Windows IIS 7

    - by Ralph
    I have a IIS 7 server with Plesk setup on a Windows 2008 R2 server and I have created a subdomain sub1.domain.com, which by default leads to my webserver on port 80, but I don't want that. I want the subdomain to lead to my port 25566 instead (for a Minecraft server), how can I accomplish this? I tried this with host headers / bindings but that resulted in a port already in use warning. How can I do this? How can I make my sub1.domain.com lead to IP.IP.IP.IP:25566? Any help would be greatly appreciated.

    Read the article

  • BIND9 Forwarding by view

    - by Triztian
    Hi I think this is a simple issue, I'd like to forward only to certain IPs in the LAN network, for example I have 2 acl lists: acl "office1" { 192.168.1.15; // With internet access }; acl "production" { 192.168.1.101; // No internet access }; I know that there probably should be more efficient ways to restrict internet access, but at the moment this is what I'd like to try.Here's what I've tried in named.conf.local // Inlcude my acl definitions include "/etc/bind/acls.conf"; view "no-internet" { match-clients { production; }; include "/etc/bind/named.conf.default-zones"; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; } view "internet" { match-clients { office1; }; include "/etc/bind/named.conf.default-zones"; forwarders { 201.56.59.14; // Made Up 201.56.59.15; // Made Up }; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; }; As you can see I want a localdomain.com defined for every computer in my network and forward internet access to the computers in the office but not to the ones on the production floor. I've modified my conf file, however the IP in the "no-internet" acl is able to resolve the domains, even though I've rebooted the computer, flushed the DNS using ipconfig /flushdns and set my DNS Server as the only one, why is this still happening? Thanks in advance.

    Read the article

  • X11 forwarding from one server to other

    - by n3oblit7
    I have a setup where I need to forward X11 from my local machine (laptop) to a Virtual machine. The server hosting this VM cannot be reached directly from my laptop. I need to first login to a gateway and from this gateway, I can access the VM. How can I forward X11 from my laptop to this VM? I have tried following but these do not work: [laptop # ] ssh -X [gateway] [gateway # ] ssh -X [VM] [laptop # ] ssh -tX [gateway] ssh -X [VM] I could forward X11 only till the gateway. (DISPLAY variable gets set on gateway)

    Read the article

  • Forwarding requests throught Apache to openVPN

    - by Ency
    I am wondering if it is possible to redirect requests through Apache to eg. OpenVPN. As long as I need to bypass firewall, I need to use port 80/443 for openVPN, but there is Apache server which has both port for itself. Client ---> Firewall (allows 80/443 only) --->| ---> Apache (80/443) ---> OpenVPN (1194) | -------------------------------------------- My Server I was thinking about mod_proxy, but I am not sure if it is good idea, have you got any ideas? I hope possible solution will be applicable on virtual host as well.

    Read the article

  • nginx root directory not forwarding correctly

    - by user66700
    The server files are store in /var/www/ Everything was working perfectly, then I've been getting the following errors 2011/01/28 17:20:05 [error] 15415#0: *1117703 "/var/www/https:/secure.domain.com/index.html" is not found (2: No such file or directory), client: 119.110.28.211, server: secure.domain.com, request: "HEAD /https://secure.domain.com/ HTTP/1.1", host: "secure.domain.com" Heres my config: server { server_name secure.domain.com; listen 443; listen [::]:443 default ipv6only=on; gzip on; gzip_comp_level 1; gzip_types text/plain text/html text/css application/x-javascript text/xml text/javascript; error_log logs/ssl.error.log; gzip_static on; gzip_http_version 1.1; gzip_proxied any; gzip_disable "msie6"; gzip_vary on; ssl on; ssl_ciphers RC4:ALL:-LOW:-EXPORT:!ADH:!MD5; keepalive_timeout 0; ssl_certificate /root/server.pem; ssl_certificate_key /root/ssl.key; location / { root /var/www; index index.html index.htm index.php; } }

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >