Search Results

Search found 670 results on 27 pages for 'g wan'.

Page 16/27 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• Connecting Small business network to Azure Site to Site VPN

  - by MarkKGreenway

  Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver is on a different floor)and any public servers can be one-to one NAT-ed to have a public and private IP. What is the best way to get a reliable connection. Between end users and the cloud? I want to know the preferred on site endpoint. Do the azure vm's have to have a local ip in the LAN subnet? (Right now 10.10.0.0/20 or 255.255.240.0 to give room if this is the case). If in purchased an asa550 would I put it behind or in front of the isa550. Would it be ahead or peer with the users switches? What is the best way to get a reliable connection. Between end users and the cloud servers?

  Read the article

• Merge only a one remote branch into a local branch with Mercurial

  - by Pepijn

  I wan to manage some profiles as XML files in Mercurial repos. The setup I'm thinking of: Each user has a repo with a branch where he manages his own profile, and a number of branches where he can pull and merge other profiles from that branch of another user. So for example I have my own profile branch and a branch labeled friends, in which I want to pull the profile branches of a few remote repos, to collect like a collection of profiles. I figured out that since the repos are unrelated I need to use -f, but I can't figure out how to pull and merge only a single branch into another. So I want like me friend someone profile ---> friends <--- profile \-> family friends <--- profile Is this even possible? Should I use separate repos instead? Is there a better solution?

  Read the article

• How to install a wiki server

  - by gvalero87

  I would like to install a wiki on my server so I can let people I know to edit documents. So, I don't wan it to be as open as wikipedia. I would like something as google docs (the thing is google docs doesn't handle images and tables on documents very well), doesn't have to be in real time as google does it. The first thing I noticed looking over internet there are different solutions. Maybe what I'm looking for is the easiest one to install. If a want to use the wiki technology don't have to much time investing on errors. Thanks for your opinions

  Read the article

• Should I install Windows 7 on a 3 years old PC?

  - by Jitendra vyas

  This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

  Read the article

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• monitor http traffic from non-browser

  - by Ananth

  hi, I want to monitor http request generated out of a exe. Is there any tool that can help me? Actually, an exe would call my asp.net web page to register a user. The exe constructs the request with all the data in it. when the request reaches my web page, I don't see any data. I wan to monitor the Request object and the traffic to find the reality. Any help is appreciated. Thanks. Ananth

  Read the article

• Apache (XAMPP 1.8.0) access.log/Intrusion Detection Concern

  - by Andy Holaday

  [I originally posted on SO but it earned me a Tumbleweed badge. This looks like a better venue for the question.] I have Apache (XAMPP 1.8.0) running on Vista Pro x64. A couple times now I have seen a pattern like the example below in access.log. Concerning is the "attack" seems to somehow shift from a public IP to a valid private IP on my network (happens to be the WAN address of one of my routers). Two questions: How is this possible, and what happens if the "attacker" stumbles on a valid request? I've googled this to no avail. 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.4/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.2.6/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc2/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc2/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.5-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:59 -0400] "GET /phpMyAdmin-2.5.7/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:01 -0400] "GET /phpMyAdmin-2.5.7-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:02 -0400] "GET HTTP/1.1" 400 1060 "-" "-"

  Read the article

• Connected 2 routers, but they won't talk

  - by ekolis

  I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

  Read the article

• Running 12.04 as a gateway - resolvconf, dhclient and dnsmasq integration

  - by Adam

  I have a gateway server which is set up originally with Ubuntu desktop 12.04 - perhaps a mistake, I don't know, something to bear in mind. I ripped out network-manager and now want to get resolvconf, dhclient and dnsmasq to play well together. dhclient gets the gateway's eth0 WAN ip address and the ISP DNS name server from the modem. dnsmasq needs to serve dhcp to the rest of the lan on eth1 and acts as a DNS cache both for the lan and for the gateway machine. I also set up iptables as a firewall. Right now, the gateway's /etc/resolv.conf shows only name server = 127.0.0.1 which is correct AFAIK. However I don't think that dhclient is giving dnsmasq the ISP DNS name server nor is dnsmasq picking up the OpenDNS and Google name servers I specified in /etc/network/interfaces - at the moment look-ups, i.e. ping or surfing, don't work unless I manually edit /etc/resolv.conf to put in an upstream name server like 8.8.8.8 So I removed the resolvconf package. Now I'm not getting dhcp on my lan and I'm not able to do DNS look-ups on the host itself - I can surf and ping on the net, but not 127.0.0.1. Where do I go from here? This setup with the config for dhclient and dnsmasq, and the same resolv.conf and hosts files worked on my old debian box.

  Read the article

• Edimax wireless router is not providing DNS services correctly

  - by Nathan Fellman

  I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

  Read the article

• What's constitute an entry on the IPTables and how to find out which client it is originated from

  - by cbd

  I have a Billion BiPac 7700N Modem/Router/Access Point and I connect another router (TP-Link TL-WR1043ND) in wan-bypass mode to extend the wireless coverage. Lately, I noticed that the connection through TP-Link has been dropping out quite regularly. Having read some posts on the Internet, I checked system log on 7700N and found that there are many "nf_conntract: expectation table full" errors, which I suppose the iptables are full. My questions: What does constitute an entry on the iptable? Is it a client or a connection (which means one client can have multiple connections) How could I find out where are those connections originated from? Note: Many reported that the issue is usually related to having torrents running but I don't have any torrents running. Thank you.

  Read the article

• SNMP counter issues with cisco RV082

  - by Chance

  Does anyone else poll this router with SNMP? We are using firmware version: 2.0.0.19-tz We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing problems is that they roll over (at 65,000) to 0 in less than our minute polling cycle, really skewing our metrics. The counter for the Lan (interface 2) seems to be functioning properly, however interfaces 3 and 4 (WAN and DMZ / WAN2) rollover at 65000. Tue May 11 08:38:31 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865677943 IF-MIB::ifInOctets.3 = Counter32: 12450 IF-MIB::ifInOctets.4 = Counter32: 49354 Look at counter IF-MIB::ifInOctets.4 5 seconds later: Tue May 11 08:38:36 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865836207 IF-MIB::ifInOctets.3 = Counter32: 13167 IF-MIB::ifInOctets.4 = Counter32: 12900 Any suggestions? Seems like a bug to me, however I just wanted to make sure I wasn't crazy.. Thanks!

  Read the article

• website not accessible with IIS6 while NAT is configured in Windows 2003

  - by Mohammed Rizwan

  I have Windows2003 server configured with IIS 6. Until now it was working fine, but since I enabled NAT for my users to access the internet via this server, the website becomes unavailable. Note that I have two nics on the server one is WAN and 2nd is for LAN. Both IPs are behind the firewall. If I stop the NAT then the website is available externally. I tried to search the answer in this forum but didn't find appropriate one or maybe didn't properly understand. I'll appreciate if anyone can help me sorting out this issue.

  Read the article

• Asterisk: Forcing a sip peer to connect via ipv6?

  - by growse

  I've got an asterisk server that connects to an upstream provider over a WAN. The upstream provider supports both IPv4 and IPv6 connectivity, and the asterisk server is behind a NAT. When asterisk connects to the upstream sip peer via IPv6, everything works perfectly. The issue I have is that when I configure the asterisk server IPv6 address via DHCPv6, a race condition means that asterisk sometimes ends up attempting to contact the upstream peer via IPv4 (the SIP DNS name has both A and AAAA records). This is because asterisk starts up before the system has a valid IPv6 address. The connection does not work via IPv4 because of the NAT. Is there a way of configuring the peer to specify that it should only be contactable over IPv6? I guess it might be possible to hack together a firewall rule to deny all IPv4 traffic to that IP, but it'd be easier to configure this within asterisk itself.

  Read the article

• How to format HDD with MHDD Tool.

  - by PP

  I have copied MHDD application on a bootable CD and i wan to use it to low level format my HDD which had some bad sectors on it. so how can mark these badsecotrs using MHDD application? Pluse can i partition/format my HDD using MHDD because after low level format i want to setup window xp on that drive. can some one explain me step by step procedure to how to lovel format driven and partition/format it and then setup xp on that. Link to MHDD app. http://hddguru.com/content/en/software/2005.10.02-MHDD/ Thanks, PP.

  Read the article

• Updating Cisco VPN config to add vpnc support

  - by Igor Kuzmitshov

  I have a Cisco 1841 configured for VPN connections of two types: Peer-to-peer for partners' routers (IPsec) — using different crypto isakmp key and crypto map with set peer, set transform-set, match address for every peer (same map name, different priorities). That crypto map name is added to the WAN interface. Client access (PPTP) — using vpdn-group with accept-dialin protocol pptp. Now, a new partner wants to connect using vpnc client. The latter needs IPSec ID (group name) and IPSec secret in addition to username and password. I guess that IPSec secret is pre-shared key that can be specified in crypto isakmp key on Cisco. But I could not find any VPN tutorials involving groups. Hence, my questions: How to add IPSec ID (group name) and IPSec secret on Cisco router for vpnc connections? Should I add a new crypto map matching all addresses as well? Is it possible to add this configuration without breaking the existing setup? Thank you.

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• How to tell Windows 7 to ignore a default gateway

  - by zildjohn01

  I currently have 2 network cards in my PC -- one connected to an internal network on a router with a disconnected WAN port (10.x.x.x), and one connected to the internet through a consumer router (192.168.0.x). Windows seems to recognize them correctly (my "Network and Sharing Center" lists them as "No Internet" and "Internet" respectively), however when I try browsing the internet it always tries the internal network's default gateway, rather than the one with internet access. Trying to ping a website results in "Reply from 10.0.0.1: Destination net unreachable.". A simple "route delete 0.0.0.0 mask 0.0.0.0 10.0.0.1" fixes the problems, but they return upon reboot, or upon renewing my IP. Is there any way to tell Windows to ignore one NIC's default gateway, or to at least give them priorities?

  Read the article

• Setting up a router as a DNS server only

  - by Jacob R

  I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

  Read the article

• Access Other Computer via ADSL Modem and Router

  - by Sohail

  My network configuration is like this ISP - Modem - Router - Computer and the same goes for my friend. We want to share large files or to access each other's computer. The Passwords to login to the web page of each other modems are known. I mean, we can access each other Modem Web GUI easily ( because we know the WAN IP of each other modem ). The question is how do i access his or how do he access my computer? Is there any way to do so. Remote desktop connection is not working :( Please help

  Read the article

• Urgent SSH Local Port Redirection

  - by Salina Odelva

  Hi, everyone. I have a shell account but the admin has restricted ssh access to the server. The server is listening on 0.0.0.0:22 but the firewall blocks any incoming attempts to this port. He says he is doing maintenance but I don't believe him and I need to backup my stuff with ssh. My question is that: Is it possible to do this: Me (Wan IP) <- Hosting Server (tcp/8080) redirects to Hosting Server (tcp/22) I don't want to involve my own linux machine in this and I can only make use of ssh.. Thanks!!

  Read the article

• Installing router - failed to verify router settings

  - by Andi

  I'm trying to install a TP-Link wireless router. I am using a modem an have a PPPoE connection. I connected the router to the computer and the modem, but in the last step of the Easy Setup it says " Failed to verify router settings. 1. Please check the WAN connection type and parameters. 2. Please check your connectivity and retry." The internet works fine if i connect the modem directly to the computer. When I connect the computer to the router, the wireless network is detected by other devices, but cannot be accessed. I accessed the router settings, and everything seems normal, except that it just says "Connecting...". It never manages to connect to the internet. I tried restarting the router and several walkthroughs on the web, but I couldn't get it to work.

  Read the article

• Setting up a router as a DNS server only

  - by Jacob R

  I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >