Search Results

Search found 1554 results on 63 pages for 'guylabbe ca'.

Page 16/63 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • All traffic is passed through OpenVPN although not requested

    - by BFH
    I have a bash script on a Ubuntu box which searches for the fastest openvpn server, connects, and binds one program to the tun0 interface. Unfortunately, all traffic is being passed through the VPN. Does anybody know what's going on? The relevant line follows: openvpn --daemon --config $cfile --auth-user-pass ipvanish.pass --status openvpn-status.log There don't seem to be any entries in iptables when I enter sudo iptables --list. The config files look like this: client dev tun proto tcp remote nyc-a04.ipvanish.com 443 resolv-retry infinite nobind persist-key persist-tun persist-remote-ip ca ca.ipvanish.com.crt tls-remote nyc-a04.ipvanish.com auth-user-pass comp-lzo verb 3 auth SHA256 cipher AES-256-CBC keysize 256 tls-cipher DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA

    Read the article

  • Trimestre financier record pour Adobe qui franchit la barre du milliard de dollars de chiffre d'affaires trimestriel

    Trimestre financier record pour Adobe qui franchit la barre du milliard De dollars de chiffre d'affaires trimestriel Adobe vient d'annoncer un bilan financier resplendissant en ce quatrième et dernier trimestre financier de l'année 2010. L'entreprise se réjouit surtout de rejoindre le club des entreprises IT enregistrant plus d'un milliard de dollars de chiffre d'affaire (CA) trimestriel. Soit une croissance de 33% par rapport au même trimestre de l'année passée où l'entreprise n'avait enregistré "que" 757.3 millions de dollars de revenus. Pour l'ensemble de l'année 2010, l'entreprise a réalisé 3.8 milliards de dollars de CA (+29%). Des perf...

    Read the article

  • Windows 8 : combien coûtent les différentes éditions et les mises à jour ? Quelles sont les conditions matérielles requises ?

    Windows 8 : Combien coûtent les différentes éditions Et les mises à jour ? Quelles conditions matérielles requises ? Windows 8, combien ça coûte ? Réponse de Normand : ça dépend. Les versions Plus sérieusement, Windows 8 (hors version RT qui n'est de toute façon pas disponible à l'achat) se présente commercialement sous deux options : la mise à jour, et la boite complète. Chacune étant disponible en deux déclinaisons pour le grand public (développeur compris) : la « normale », et la « Pro ». Auquelles s'ajoute une version « Entreprise » uniquement disponible en licence de volume. Comme tout système d'exploitation, ch...

    Read the article

  • openSSL tutorial not fully working - Can sign but cannot restore original file

    - by djechelon
    I'm writing, and testing, a little tutorial for my groupmates involved in an openSSL homework. We have a bunch of PDF files, I'm the CA and each one should send me a signed PDF for me to be verified. I've told them to do the following (and tried to do it by myself) Request and obtain a certificate (I'll skip this part) Create a MIME message with the PDF file in it makemime -c "text/pdf" -a "Content-Disposition: attachment; filename=”Elaborato.pdf" Elaborato.pdf > Elaborato.pdf.msg Sign with openSSL openssl smime -sign -in Elaborato.pdf.msg -out Elaborato.pdf.p7m -certfile ca.pem -certfile nomegruppo.crt -inkey nomegruppo.key -signer nomegruppo.crt Verify with openssl smime -verify -in Elaborato.pdf.p7m -out Elaborato-verified.msg -CAfile ca.pem -signer nomegruppo.crt Extract attachment with munpack Elaborato-verified.msg View with Acrobat Reader The problem is that even if I get a file that (from its binary content) resembles a PDF file my current Ubuntu PDF viewer doesn't read it. The XXXElaborato.pdf extracted by munpack is a little bit smaller than the original. What's the problem with this procedure? In theory, they should send me the signed S/MIME message and I should be able to read the PDF within it. Why can't I restore the original content of the PDF file?

    Read the article

  • Certificate revocation check fails for non-domain guest in spite of accessible CRL

    - by 0xFE
    When we try to use certificates on computers that are not part of the domain, Windows complains that The revocation function was unable to check revocation because the revocation server was offline. However, if I manually open the certificate and check the CRL Distribution Point property, I see an ldap:/// URL and an http:// URL that points to externally-accessible IIS site that hosts the CRLs. Of course, the non-domain-joined client cannot access the ldap:/// URL, but it can download the CRL from the http:// link (at least in a browser). I enabled CAPI logging and I see the event that corresponds to this failed revocation check. The RevocationInfo section is: RevocationInfo [ freshnessTime] PT11H27M4S RevocationResult The revocation function was unable to check revocation because the revocation server was offline. [ value] 80092013 CertificateRevocationList [ location] UrlCache [ url] http://the correct URL [fileRef] 6E463C2583E17C63EF9EAC4EFBF2AEAFA04794EB.crl [issuerName] the name of the CA Furthermore, I can see the HTTP request to the correct URL and the server's response (HTTP 304 Not Modified) with Microsoft Network Monitor. I ran certutil -verify -urlfetch, and it seems to show the same thing: the computer recognizes both URLs, tries both, and even though the http:// link succeeds, returns the same error. Is there a way to have non-domain-joined clients skip the ldap:/// link and only check the http:// one? Edit: The ldap:/// URL is ldap:///CN=<name of CA>,CN=<name of server that is running the CA>,CN=CDP,CN=Public Key Services,CN=Services,CN=Configuration,DC=<domain name>?certificateRevocationList?base?objectClass=cRLDistributionPoint The non-domain-joined clients may be on the domain network or on an external network. The http:// CDP is accessible from the public internet.

    Read the article

  • Referer is passed from HTTPS to HTTP in some cases... How?

    - by ravisorg
    In theory browsers do not pass on referer information from HTTPS to HTTP sites. And in my experience this has always been true. But I just found an exception, and I want to understand why it works so I can use it as well. Search for "what is my referer" on https://www.google.ca/ eg: https://www.google.ca/search?q=what+is+my+referer There are a few sites that will show referer. They all seem to "work" when they shouldn't. For example, click the www.whatismyreferer.com one. I get: Your referer: https://www.google.ca/ Note that sometimes, rarely, I get "no referer" as the result. Go back and click the link again and it'll "work" the next time. This should not happen. www.whatismyreferer.com is a non-HTTPS site. The referer header should not be being passed, but it is. What's going on here, and how can I do the same from my HTTPS site to the HTTP sites I'm linking to?

    Read the article

  • Populating a combobox on selectedindex change of another combobox

    - by Riju K K
    Hi, I have created a custom dialog UI, which contains two combobox with SQL server instance & on selection of one of SQLServer instance, another combobox has to be filled with name of Databases on that server instance. I am able to find filling combo with SQL server Instances I had written a similar CustomAction to fill the combobox with database names [CustomAction] public static ActionResult FillDatabases(Session xiSession) { xiSession.Log("Begin CustomAction"); xiSession.Log("Opening view"); View lView = xiSession.Database.OpenView("DELETE FROM ComboBox WHERE ComboBox.Property='DBNAME'"); lView.Execute(); lView = xiSession.Database.OpenView("SELECT * FROM ComboBox"); lView.Execute(); int Index = 1; //bool flag = false; try { Microsoft.SqlServer.Management.Smo.Server svr = new Microsoft.SqlServer.Management.Smo.Server(xiSession["DBSRVR"]); foreach (Microsoft.SqlServer.Management.Smo.Database db in svr.Databases ) { String dbName = db.Name; Record lRecord = xiSession.Database.CreateRecord(3); xiSession.Log("Setting record details"); lRecord.SetString(1, "DBNAME"); lRecord.SetInteger(2, Index); lRecord.SetString(3, db.Name); xiSession.Log("Adding record"); lView.Modify(ViewModifyMode.InsertTemporary, lRecord); ++Index; } } catch (Exception ex) { //logException(xiSession, ex); xiSession.Log(ex.Message ); } lView.Close(); xiSession.Log("Closing view"); lView.Close(); return ActionResult.Success; } I want to call these custom actions somewhat like shown below, <Binary Id="CustomActions.CA.dll" SourceFile="CustomActions.CA.dll" /> <CustomAction Id="FillServerInstances" BinaryKey="CustomActions.CA.dll" DllEntry="FillServerInstances" Execute="immediate" Return="check" /> <CustomAction Id="FillDatabases" BinaryKey="CustomActions.CA.dll" DllEntry="FillDatabases" Execute="immediate" Return="check" /> <InstallUISequence> <Custom Action="FillServerInstances" After="CostFinalize" /> <Custom Action="FillDatabases" After="FillServerInstances" /> </InstallUISequence> I need to show this Sqlserver selection custom dialog from another custom UI, in case user clicked on a pushbutton. Am I doing the right thing in the WiX code? Is there a better way in which combobox custom action fire only when user click on a pushbutton? "FillDatabases" custom action have to be fire whenever user select a new SQLServer instance. How do i do that? Thanks

    Read the article

  • How to stop UITableView moveRowAtIndexPath from leaving blank rows upon reordering

    - by coneybeare
    I am having an issue where in reordering my UITableViewCells, the tableView is not scrolling with the cell. Only a blank row appears and any subsequent scrolling gets an Array out of bounds error without any of my code in the Stack Trace. Here is a quick video of the problem. Here is the relevant code: - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { return indexPath.section == 1; } - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { BOOL ret = indexPath.section == 1 && indexPath.row < self.count; DebugLog(@"canMoveRowAtIndexPath: %d:%d %@", indexPath.section, indexPath.row, (ret ? @"YES" : @"NO")); return ret; } - (void)delayedUpdateCellBackgroundPositionsForTableView:(UITableView *)tableView { [self performSelectorOnMainThread:@selector(updateCellBackgroundPositionsForTableView:) withObject:tableView waitUntilDone:NO]; } - (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { if (fromIndexPath.row == toIndexPath.row) return; DebugLog(@"Moved audio from %d:%d to %d:%d", fromIndexPath.section, fromIndexPath.row, toIndexPath.section, toIndexPath.row); NSMutableArray *audio = [self.items objectAtIndex:fromIndexPath.section]; [audio exchangeObjectAtIndex:fromIndexPath.row withObjectAtIndex:toIndexPath.row]; [self performSelector:@selector(delayedUpdateCellBackgroundPositionsForTableView:) withObject:tableView afterDelay:kDefaultAnimationDuration/3]; } And here is the generated Stack Trace of the crash: Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: iPhone Simulator 3.2 (193.3), iPhone OS 3.0 (7A341) *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSCFArray removeObjectsInRange:]: index (6) beyond bounds (6)' Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 CoreFoundation 0x302ac924 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 4 1 libobjc.A.dylib 0x93cb2509 objc_exception_throw + 56 2 CoreFoundation 0x3028e5fb +[NSException raise:format:arguments:] + 155 3 CoreFoundation 0x3028e55a +[NSException raise:format:] + 58 4 Foundation 0x305684e9 _NSArrayRaiseBoundException + 121 5 Foundation 0x30553a6e -[NSCFArray removeObjectsInRange:] + 142 6 UIKit 0x30950105 -[UITableView(_UITableViewPrivate) _updateVisibleCellsNow] + 862 7 UIKit 0x30947715 -[UITableView layoutSubviews] + 250 8 QuartzCore 0x0090bd94 -[CALayer layoutSublayers] + 78 9 QuartzCore 0x0090bb55 CALayerLayoutIfNeeded + 229 10 QuartzCore 0x0090b3ae CA::Context::commit_transaction(CA::Transaction*) + 302 11 QuartzCore 0x0090b022 CA::Transaction::commit() + 292 12 QuartzCore 0x009132e0 CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) + 84 13 CoreFoundation 0x30245c32 __CFRunLoopDoObservers + 594 14 CoreFoundation 0x3024503f CFRunLoopRunSpecific + 2575 15 CoreFoundation 0x30244628 CFRunLoopRunInMode + 88 16 GraphicsServices 0x32044c31 GSEventRunModal + 217 17 GraphicsServices 0x32044cf6 GSEventRun + 115 18 UIKit 0x309021ee UIApplicationMain + 1157 19 XXXXXXXX 0x0000278a main + 104 (main.m:12) 20 XXXXXXXX 0x000026f6 start + 54 NOte that the array out of bounds length is not the length of my elements (I have 9), but always something smaller. I have been trying to solve this for many hours days without avail… any ideas? UPDATE: More code as requested In my delegate: - (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath { return UITableViewCellEditingStyleNone; } - (NSIndexPath *)tableView:(UITableView *)tableView targetIndexPathForMoveFromRowAtIndexPath:(NSIndexPath *)sourceIndexPath toProposedIndexPath:(NSIndexPath *)proposedDestinationIndexPath { int count = [(UAPlaylistEditDataSource *)self.dataSource count]; if (proposedDestinationIndexPath.section == 0) { return [NSIndexPath indexPathForRow:0 inSection:sourceIndexPath.section]; }else if (proposedDestinationIndexPath.row >= count) { return [NSIndexPath indexPathForRow:count-1 inSection:sourceIndexPath.section]; } return proposedDestinationIndexPath; } …thats about it. I am using the three20 framework and I have not had any issues with reordering till now. The problem is also not in the updateCellBackgroundPositionsForTableView: method as it still crashes when this is commented out.

    Read the article

  • how to create registry key through java program?

    - by Arivu2020
    I want to create registry key through java program to add the jar file in the start up. RegistryKey r=new RegistryKey(RootKey.HKEY_CURRENT_USER,"Software/Microsoft/Windows/CurrentVersion/Run"); r.createSubkey("sample"); But i got the error: Exception in thread "main" java.lang.UnsatisfiedLinkError: ca.beq.util.win32.registry.RegistryKey.testInitialized()V at ca.beq.util.win32.registry.RegistryKey.testInitialized(Native Method) How can i do that? Thanks

    Read the article

  • Using open-uri how can I get the contents of a redirecting page?

    - by Shpigford
    I ultimately want to get data from this page: http://www.canadapost.ca/cpotools/apps/track/personal/findByTrackNumber?trackingNumber=0656887000494793 But that page forwards to: http://www.canadapost.ca/cpotools/apps/track/personal/findByTrackNumber?execution=eXs1 So when I use open (open-uri) to try and fetch the data, it throws a RuntimeError error saying HTTP redirection loop: So I'm not really sure how to get that data after it redirects and throws that error.

    Read the article

  • JNDI InvalidnameException for CN 'LastName, FirstName'

    - by user321524
    Hi: I am writing to active directory using JNDI, it is successful for "CN=Yuri Gagarin,OU=Admins,DC=ead,DC=ubc,DC=ca"; but fails for "CN=Gagarin, Yuri,OU=Admins,DC=ead,DC=ubc,DC=ca". I need to store displayName, cn, name in the format 'lastName, FirstName'. What do I need to do to get this going? Thanks very much.

    Read the article

  • Scraping a page from a secure URL which is possibly using a session ID

    - by VN44CA
    How to scrape a page like this. https://www.procom.ca/JobList.aspx?keywords=&Cities=&reference=&JobType=0 It is secure, and requires a referrer? I can't get anything using wget or httplib2. If you go through this page, you get a list and it works on a browser but not the command line. https://www.procom.ca/jobsearch.aspx I am interested in command line fetching. thx

    Read the article

  • What do I need to distribute (keys, certs) for Python w/ SSL-socket connection?

    - by fandingo
    I'm trying to write a generic server-client application that will be able to exchange data amongst servers. I've read over quite a few OpenSSL documents, and I have successfully setup my own CA and created a cert (and private key) for testing purposes. I'm stuck with Python 2.3, so I can't use the standard "ssl" library. Instead, I'm stuck with PyOpenSSL, which doesn't seem bad, but there aren't many documents out there about it. My question isn't really about getting it working. I'm more confused about the certificates and where they need to go. Here are my two programs that do work: Server: #!/bin/env python from OpenSSL import SSL import socket import pickle def verify_cb(conn, cert, errnum, depth, ok): print('Got cert: %s' % cert.get_subject()) return ok ctx = SSL.Context(SSL.TLSv1_METHOD) ctx.set_verify(SSL.VERIFY_PEER|SSL.VERIFY_FAIL_IF_NO_PEER_CERT, verify_cb) # ?????? ctx.use_privatekey_file('./Dmgr-key.pem') ctx.use_certificate_file('Dmgr-cert.pem') # ?????? ctx.load_verify_locations('./CAcert.pem') server = SSL.Connection(ctx, socket.socket(socket.AF_INET, socket.SOCK_STREAM)) server.bind(('', 50000)) server.listen(3) a, b = server.accept() c = a.recv(1024) print(c) Client: from OpenSSL import SSL import socket import pickle def verify_cb(conn, cert, errnum, depth, ok): print('Got cert: %s' % cert.get_subject()) return ok ctx = SSL.Context(SSL.TLSv1_METHOD) ctx.set_verify(SSL.VERIFY_PEER, verify_cb) # ?????????? ctx.use_privatekey_file('/home/justin/code/work/CA/private/Dmgr-key.pem') ctx.use_certificate_file('/home/justin/code/work/CA/Dmgr-cert.pem') # ????????? ctx.load_verify_locations('/home/justin/code/work/CA/CAcert.pem') sock = SSL.Connection(ctx, socket.socket(socket.AF_INET, socket.SOCK_STREAM)) sock.connect(('10.0.0.3', 50000)) a = Tester(2, 2) b = pickle.dumps(a) sock.send("Hello, world") sock.flush() sock.send(b) sock.shutdown() sock.close() I found this information from ftp://ftp.pbone.net/mirror/ftp.pld-linux.org/dists/2.0/PLD/i586/PLD/RPMS/python-pyOpenSSL-examples-0.6-2.i586.rpm which contains some example scripts. As you might gather, I don't fully understand the sections between the " # ????????." I don't get why the certificate and private key are needed on both the client and server. I'm not sure where each should go, but shouldn't I only need to distribute one part of the key (probably the public part)? It undermines the purpose of having asymmetric keys if you still need both on each server, right? I tried alternating removing either the pkey or cert on either box, and I get the following error no matter which I remove: OpenSSL.SSL.Error: [('SSL routines', 'SSL3_READ_BYTES', 'sslv3 alert handshake failure'), ('SSL routines', 'SSL3_WRITE_BYTES', 'ssl handshake failure')] Could someone explain if this is the expected behavior for SSL. Do I really need to distribute the private key and public cert to all my clients? I'm trying to avoid any huge security problems, and leaking private keys would tend to be a big one... Thanks for the help!

    Read the article

  • Special character into querystring .NET

    - by user353089
    I need to send the follow querystring: http://prod.intranet.siemens.com.br/drvs/index.aspx?page=2&pag=4&varpatch=%20C:\Documents%20and%20Settings\OPE253\My%20Documents\Ca$@#! Then i try to assing this to a string,but .NET break string at http://prod.intranet.siemens.com.br/drvs/index.aspx?page=2&pag=4&varpatch=%20C:\Documents%20and%20Settings\OPE253\My%20Documents\Ca$@ '#" do not appears in querystring Any ideas?

    Read the article

  • OpenVPN: Connection established but can’t connect to server

    - by Maik
    I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

    Read the article

  • how does openvpn decide which interface to get IP addrs from

    - by bkrupa
    Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

    Read the article

  • Trouble with site-to-site OpenVPN & pfSense not passing traffic

    - by JohnCC
    I'm trying to get an OpenVPN tunnel going on pfSense 1.2.3-RELEASE running on embedded routers. I have a local LAN 10.34.43.0/254. The remote LAN is 10.200.1.0/24. The local pfSense is configured as the client, and the remote is configured as the server. My OpenVPN tunnel is using the IP range 10.99.89.0/24 internally. There are also some additional LANs on the remote side routed through the tunnel, but the issue is not with those since my connectivity fails before that point in the chain. The tunnel comes up fine and the logs look healthy. What I find is this:- I can ping and telnet to the remote LAN and the additional remote LANs from the local pfSense box's shell. I cannot ping or telnet to any remote LANs from the local network. I cannot ping or telnet to the local network from the remote LAN or the remote pfSense box's shell. If I tcpdump the tun interfaces on both sides and ping from the local LAN, I see the packets hit the tunnel locally, but they do not appear on the remote side (nor do they appear on the remote LAN interface if I tcpdump that). If I tcpdump the tun interfaces on both sides and ping from the local pfSense shell, I see the packets hit the tunnel locally, and exit the remote side. I can also tcpdump the remote LAN interface and see them pass there too. If I tcpdump the tun interfaces on both sides and ping from the remote pfSense shell, I see the packets hit the remote tun but they do not emerge from the local one. Here is the config file the remote side is using:- #user nobody #group nobody daemon keepalive 10 60 ping-timer-rem persist-tun persist-key dev tun proto udp cipher BF-CBC up /etc/rc.filter_configure down /etc/rc.filter_configure server 10.99.89.0 255.255.255.0 client-config-dir /var/etc/openvpn_csc push "route 10.200.1.0 255.255.255.0" lport <port> route 10.34.43.0 255.255.255.0 ca /var/etc/openvpn_server0.ca cert /var/etc/openvpn_server0.cert key /var/etc/openvpn_server0.key dh /var/etc/openvpn_server0.dh comp-lzo push "route 205.217.5.128 255.255.255.224" push "route 205.217.5.64 255.255.255.224" push "route 165.193.147.128 255.255.255.224" push "route 165.193.147.32 255.255.255.240" push "route 192.168.1.16 255.255.255.240" push "route 192.168.2.16 255.255.255.240" Here is the local config:- writepid /var/run/openvpn_client0.pid #user nobody #group nobody daemon keepalive 10 60 ping-timer-rem persist-tun persist-key dev tun proto udp cipher BF-CBC up /etc/rc.filter_configure down /etc/rc.filter_configure remote <host> <port> client lport 1194 ifconfig 10.99.89.2 10.99.89.1 ca /var/etc/openvpn_client0.ca cert /var/etc/openvpn_client0.cert key /var/etc/openvpn_client0.key comp-lzo You can see the relevant parts of the routing tables extracted from pfSense here http://pastie.org/5365800 The local firewall permits all ICMP from the LAN, and my PC is allowed everything to anywhere. The remote firewall treats its LAN as trusted and permits all traffic on that interface. Can anyone suggest why this is not working, and what I could try next?

    Read the article

  • What is the RSA SecurID packet format?

    - by bmatthews68
    I am testing a client application that authenticates using RSA SecurID hardware tokens. The authentication is failing and I am not finding any useful information in the log files. I am using Authentication Manager 8.0 and the Java SDK. I have a traffic capture which I would like to analyze with Wireshark to and from port 5500 on the authentication agent. But I can't find the packet format searching the internet or on the the RSA SecurCare knowledge base. Can anybody direct me to the packet format? Here is an extract from the rsa_api_debug.log file which dumps the UDP payload of the request and the response: [2013-11-06 15:11:08,602] main - b.a():? - Sending 508 bytes to 192.168.10.121; contents: 5c 5 0 3 3 5 0 0 2 0 0 0 0 0 1 ea 71 ee 50 6e 45 83 95 8 39 4 72 e 55 cf cc 62 6d d5 a4 10 79 89 13 d5 23 6a c1 ab 33 8 c3 a1 91 92 93 4f 1e 4 8d 2a 22 2c d0 c3 7 fc 96 5f ba bf 0 80 60 60 9d 1d 9c b9 f3 58 4b 43 18 5f e0 6d 5e f5 f4 5d df bf 41 b9 9 ae 46 a0 a9 66 2d c7 6 f6 d7 66 f1 4 f8 ad 8a 9f 4d 7e e5 9c 45 67 16 15 33 70 f0 1 d5 c0 38 39 f5 fd 5e 15 4f e3 fe ea 70 fa 30 c9 e0 18 ab 64 a9 fe 2c 89 78 a2 96 b6 76 3e 2e a2 ae 2e e0 69 80 8d 51 9 56 80 f4 1a 73 9a 70 f3 e7 c1 49 49 c3 41 3 c6 ce 3e a8 68 71 3f 2 b2 9b 27 8e 63 ce 59 38 64 d1 75 b7 b7 1f 62 eb 4d 1d de c7 21 e0 67 85 b e6 c3 80 0 60 54 47 e ef 3 f9 33 7b 78 e2 3e db e4 8e 76 73 45 3 38 34 1e dd 43 3e 72 a7 37 72 5 34 8e f4 ba 9d 71 6c e 45 49 fa 92 a f6 b bf 5 b 4f dc bd 19 0 7e d2 ef 94 d 3b 78 17 37 d9 ae 19 3a 7e 46 7d ea e4 3a 8c e1 e5 9 50 a2 eb df f2 57 97 bc f2 c3 a7 6f 19 7f 2c 1a 3f 94 25 19 4b b2 37 ed ce 97 f ae f ec c9 f5 be f0 8f 72 1c 34 84 1b 11 25 dd 44 8b 99 75 a4 77 3d e1 1d 26 41 58 55 5f d5 27 82 c d3 2a f8 4 aa 8d 5e e4 79 0 49 43 59 27 5e 15 87 a f4 c4 57 b6 e1 f8 79 3b d3 20 69 5e d0 80 6a 6b 9f 43 79 84 94 d0 77 b6 fc f 3 22 ca b9 35 c0 e8 7b e9 25 26 7f c9 fb e4 a7 fc bb b7 75 ac 7b bc f4 bb 4f a8 80 9b 73 da 3 94 da 87 e7 94 4c 80 b3 f1 2e 5b d8 2 65 25 bb 92 f4 92 e3 de 8 ee 2 30 df 84 a4 69 a6 a1 d0 9c e7 8e f 8 71 4b d0 1c 14 ac 7c c6 e3 2a 2e 2a c2 32 bc 21 c4 2f 4d df 9a f3 10 3e e5 c5 7f ad e4 fb ae 99 bf 58 0 20 0 0 0 0 0 0 0 0 0 0 [2013-11-06 15:11:08,602] main - b.b():? - Enterring getResponse [2013-11-06 15:11:08,618] main - b.a():? - Enterring getTimeoutValue(AceRequest AceAuthV4Request[AbstractAceRequest[ hdr=AcePacketHeader[Type=92 Ver=5 AppID=3 Enc=ENCRYPT Hi-Proto=5 Opt=0 CirID=0] created=1383750668571 trailer=AcePackeTrailer[nonce=39e7a607b517c4dd crc=722833884]] user=bmatthews node-sec-req=0 wpcodes=null resp-mac=0 m-resp-mac=0 client=192.168.10.3 passcode==ZTmY|? sec-sgmt=AceSecondarySegments[ cnt=3] response=none]) [2013-11-06 15:11:08,618] main - b.a():? - acm base timeout: 5 [2013-11-06 15:11:08,618] main - b.b():? - Timeout is 5000 [2013-11-06 15:11:08,618] main - b.b():? - Current retries: 0 [2013-11-06 15:11:10,618] main - b.b():? - Received 508 bytes from 192.168.10.121; contents: 6c 5 0 3 3 6 0 0 0 0 0 1 4d 18 55 ca 18 df 84 49 70 ee 24 4a a5 c3 1c 4e 36 d8 51 ad c7 ef 49 89 6e 2e 23 b4 7e 49 73 4 15 d f4 d5 c0 bf fc 72 5b be d1 62 be e0 de 23 56 bf 26 36 7f b f0 ba 42 61 9b 6f 4b 96 88 9c e9 86 df c6 82 e5 4c 36 ee dc 1e d8 a1 0 71 65 89 dc ca ee 87 ae d6 60 c 86 1c e8 ef 9f d9 b9 4c ed 7 55 77 f3 fc 92 61 f9 32 70 6f 32 67 4d fc 17 4e 7b eb c3 c7 8c 64 3f d0 d0 c7 86 ad 4e 21 41 a2 80 dd 35 ba 31 51 e2 a0 ef df 82 52 d0 a8 43 cb 7c 51 c 85 4 c5 b2 ec 8f db e1 21 90 f5 d7 1b d7 14 ca c0 40 c5 41 4e 92 ee 3 ec 57 7 10 45 f3 54 d7 e4 e6 6e 79 89 9a 21 70 7a 3f 20 ab af 68 34 21 b7 1b 25 e1 ab d 9f cd 25 58 5a 59 b1 b8 98 58 2f 79 aa 8a 69 b9 4c c1 7d 36 28 a3 23 f5 cc 2b ab 9e f a1 79 ab 90 fd 5f 76 9f d9 86 d1 fc 4c 7a 4 24 6d de 64 f1 53 22 b0 b7 91 9a 7c a2 67 2a 35 68 83 74 6a 21 ac eb f8 a2 29 53 21 2f 5a 42 d6 26 b8 f6 7f 79 96 5 3b c2 15 3a b d0 46 42 b7 74 4e 1f 6a ad f5 73 70 46 d3 f8 e a3 83 a3 15 29 6e 68 2 df 56 5c 88 8d 6c 2f ab 11 f1 5 73 58 ec 4 5f 80 e3 ca 56 ce 8 b9 73 7c 79 fc 3 ff f1 40 97 bb e3 fb 35 d1 8d ba 23 fc 2d 27 5b f7 be 15 de 72 30 b e d6 5c 98 e8 44 bd ed a4 3d 87 b8 9b 35 e9 64 80 9a 2a 3c a2 cf 3e 39 cb f6 a2 f4 46 c7 92 99 bc f7 4a de 7e 79 9d 9b d9 34 7f df 27 62 4f 5b ef 3a 4c 8d 2e 66 11 f7 8 c3 84 6e 57 ba 2a 76 59 58 78 41 18 66 76 fd 9d cb a2 14 49 e1 59 4a 6e f5 c3 94 ae 1a ba 51 fc 29 54 ba 6c 95 57 6b 20 87 cc b8 dc 5f 48 72 9c c0 2c dd 60 56 4e 4c 6c 1d 40 bd 4 a1 10 4e a4 b1 87 83 dd 1c f2 df 4c [2013-11-06 15:11:10,618] main - a.a():? - Response status is: 1 [2013-11-06 15:11:10,618] main - a.a():? - Authenticaton failed for bmatthews ! [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown invoked [2013-11-06 15:11:10,618] main - AuthSessionFactory.shutdown():? - RSA Authentication API shutdown successful

    Read the article

  • Reasoner Conversion Problems:

    - by Annalyne
    I have this code right here in Java and I wanted to translate it in C++, but I had some problems going: this is the java code: import java.io.*; import java.util.*; public class ClueReasoner { private int numPlayers; private int playerNum; private int numCards; private SATSolver solver; private String caseFile = "cf"; private String[] players = {"sc", "mu", "wh", "gr", "pe", "pl"}; private String[] suspects = {"mu", "pl", "gr", "pe", "sc", "wh"}; private String[] weapons = {"kn", "ca", "re", "ro", "pi", "wr"}; private String[] rooms = {"ha", "lo", "di", "ki", "ba", "co", "bi", "li", "st"}; private String[] cards; public ClueReasoner() { numPlayers = players.length; // Initialize card info cards = new String[suspects.length + weapons.length + rooms.length]; int i = 0; for (String card : suspects) cards[i++] = card; for (String card : weapons) cards[i++] = card; for (String card : rooms) cards[i++] = card; numCards = i; // Initialize solver solver = new SATSolver(); addInitialClauses(); } private int getPlayerNum(String player) { if (player.equals(caseFile)) return numPlayers; for (int i = 0; i < numPlayers; i++) if (player.equals(players[i])) return i; System.out.println("Illegal player: " + player); return -1; } private int getCardNum(String card) { for (int i = 0; i < numCards; i++) if (card.equals(cards[i])) return i; System.out.println("Illegal card: " + card); return -1; } private int getPairNum(String player, String card) { return getPairNum(getPlayerNum(player), getCardNum(card)); } private int getPairNum(int playerNum, int cardNum) { return playerNum * numCards + cardNum + 1; } public void addInitialClauses() { // TO BE IMPLEMENTED AS AN EXERCISE // Each card is in at least one place (including case file). for (int c = 0; c < numCards; c++) { int[] clause = new int[numPlayers + 1]; for (int p = 0; p <= numPlayers; p++) clause[p] = getPairNum(p, c); solver.addClause(clause); } // If a card is one place, it cannot be in another place. // At least one card of each category is in the case file. // No two cards in each category can both be in the case file. } public void hand(String player, String[] cards) { playerNum = getPlayerNum(player); // TO BE IMPLEMENTED AS AN EXERCISE } public void suggest(String suggester, String card1, String card2, String card3, String refuter, String cardShown) { // TO BE IMPLEMENTED AS AN EXERCISE } public void accuse(String accuser, String card1, String card2, String card3, boolean isCorrect) { // TO BE IMPLEMENTED AS AN EXERCISE } public int query(String player, String card) { return solver.testLiteral(getPairNum(player, card)); } public String queryString(int returnCode) { if (returnCode == SATSolver.TRUE) return "Y"; else if (returnCode == SATSolver.FALSE) return "n"; else return "-"; } public void printNotepad() { PrintStream out = System.out; for (String player : players) out.print("\t" + player); out.println("\t" + caseFile); for (String card : cards) { out.print(card + "\t"); for (String player : players) out.print(queryString(query(player, card)) + "\t"); out.println(queryString(query(caseFile, card))); } } public static void main(String[] args) { ClueReasoner cr = new ClueReasoner(); String[] myCards = {"wh", "li", "st"}; cr.hand("sc", myCards); cr.suggest("sc", "sc", "ro", "lo", "mu", "sc"); cr.suggest("mu", "pe", "pi", "di", "pe", null); cr.suggest("wh", "mu", "re", "ba", "pe", null); cr.suggest("gr", "wh", "kn", "ba", "pl", null); cr.suggest("pe", "gr", "ca", "di", "wh", null); cr.suggest("pl", "wh", "wr", "st", "sc", "wh"); cr.suggest("sc", "pl", "ro", "co", "mu", "pl"); cr.suggest("mu", "pe", "ro", "ba", "wh", null); cr.suggest("wh", "mu", "ca", "st", "gr", null); cr.suggest("gr", "pe", "kn", "di", "pe", null); cr.suggest("pe", "mu", "pi", "di", "pl", null); cr.suggest("pl", "gr", "kn", "co", "wh", null); cr.suggest("sc", "pe", "kn", "lo", "mu", "lo"); cr.suggest("mu", "pe", "kn", "di", "wh", null); cr.suggest("wh", "pe", "wr", "ha", "gr", null); cr.suggest("gr", "wh", "pi", "co", "pl", null); cr.suggest("pe", "sc", "pi", "ha", "mu", null); cr.suggest("pl", "pe", "pi", "ba", null, null); cr.suggest("sc", "wh", "pi", "ha", "pe", "ha"); cr.suggest("wh", "pe", "pi", "ha", "pe", null); cr.suggest("pe", "pe", "pi", "ha", null, null); cr.suggest("sc", "gr", "pi", "st", "wh", "gr"); cr.suggest("mu", "pe", "pi", "ba", "pl", null); cr.suggest("wh", "pe", "pi", "st", "sc", "st"); cr.suggest("gr", "wh", "pi", "st", "sc", "wh"); cr.suggest("pe", "wh", "pi", "st", "sc", "wh"); cr.suggest("pl", "pe", "pi", "ki", "gr", null); cr.printNotepad(); cr.accuse("sc", "pe", "pi", "bi", true); } } how can I convert this? there are too many errors I get. for my C++ code (as a commentor asked for) #include <iostream> #include <cstdlib> #include <string> using namespace std; void Scene_Reasoner() { int numPlayer; int playerNum; int cardNum; string filecase = "Case: "; string players [] = {"sc", "mu", "wh", "gr", "pe", "pl"}; string suspects [] = {"mu", "pl", "gr", "pe", "sc", "wh"}; string weapons [] = {"kn", "ca", "re", "ro", "pi", "wr"}; string rooms[] = {"ha", "lo", "di", "ki", "ba", "co", "bi", "li", "st"}; string cards [0]; }; void Scene_Reason_Base () { numPlayer = players.length; // Initialize card info cards = new String[suspects.length + weapons.length + rooms.length]; int i = 0; for (String card : suspects) cards[i++] = card; for (String card : weapons) cards[i++] = card; for (String card : rooms) cards[i++] = card; cardNum = i; }; private int getCardNum (string card) { for (int i = 0; i < numCards; i++) if (card.equals(cards[i])) return i; cout << "Illegal card: " + card <<endl; return -1; }; private int getPairNum(String player, String card) { return getPairNum(getPlayerNum(player), getCardNum(card)); }; private int getPairNum(int playerNum, int cardNum) { return playerNum * numCards + cardNum + 1; }; int main () { return 0; }

    Read the article

  • Trouble on setting SSL certificates for Virtual Hosts using Apache\Phusion Passenger in localhost

    - by user502052
    I am using Ruby on Rails 3 and I would like to make to work HTTPS connections on localhost. I am using: Apache v2 + Phusion Passenger Mac OS + Snow Leopard v10.6.6 My Ruby on Rails installation use the Typhoeus gem (it is possible to use the Ruby net\http library but the result doesn't change) to make HTTP requests over HTTPS. I created self-signed ca.key, pjtname.crt and pjtname.key as detailed on the Apple website. Notice: Following instruction from the Apple website, on running the openssl req -new -key server.key -out server.csr command (see the link) at this point Common Name (eg, YOUR name) []: (this is the important one) I entered *pjtname.com so that is valid for all sub_domain of that site. In my Apache httpd.conf I have two virtual hosts configured in this way: # Secure (SSL/TLS) connections #Include /private/etc/apache2/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include /private/etc/apache2/other/*.conf # Passenger configuration LoadModule passenger_module /Users/<my_user_name>/.rvm/gems/ruby-1.9.2-p136/gems/passenger-3.0.2/ext/apache2/mod_passenger.so PassengerRoot /Users/<my_user_name>/.rvm/gems/ruby-1.9.2-p136/gems/passenger-3.0.2 PassengerRuby /Users/<my_user_name>/.rvm/wrappers/ruby-1.9.2-p136/ruby # Go ahead and accept connections for these vhosts # from non-SNI clients SSLStrictSNIVHostCheck off # Ensure that Apache listens on port 443 Listen 443 # Listen for virtual host requests on all IP addresses NameVirtualHost *:80 NameVirtualHost *:443 # # PJTNAME.COM and subdomains SETTING # <VirtualHost *:443> # Because this virtual host is defined first, it will # be used as the default if the hostname is not received # in the SSL handshake, e.g. if the browser doesn't support # SNI. ServerName pjtname.com:443 DocumentRoot "/Users/<my_user_name>/Sites/pjtname.com/pjtname.com/public" ServerAdmin [email protected] ErrorLog "/private/var/log/apache2/error_log" TransferLog "/private/var/log/apache2/access_log" RackEnv development <Directory "/Users/<my_user_name>/Sites/pjtname.com/pjtname.com/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on # Self Signed certificates # Server Certificate SSLCertificateFile /private/etc/apache2/ssl/wildcard.certificate/pjtname.crt # Server Private Key SSLCertificateKeyFile /private/etc/apache2/ssl/wildcard.certificate/pjtname.key # Server Intermediate Bundle SSLCertificateChainFile /private/etc/apache2/ssl/wildcard.certificate/ca.crt </VirtualHost> # HTTP Setting <VirtualHost *:80> ServerName pjtname.com DocumentRoot "/Users/<my_user_name>/Sites/pjtname.com/pjtname.com/public" RackEnv development <Directory "/Users/<my_user_name>/Sites/pjtname.com/pjtname.com/public"> Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *:443> ServerName users.pjtname.com:443 DocumentRoot "/Users/<my_user_name>/Sites/pjtname.com/users.pjtname.com/public" ServerAdmin [email protected] ErrorLog "/private/var/log/apache2/error_log" TransferLog "/private/var/log/apache2/access_log" RackEnv development <Directory "/Users/<my_user_name>/Sites/pjtname.com/users.pjtname.com/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on # Self Signed certificates # Server Certificate SSLCertificateFile /private/etc/apache2/ssl/wildcard.certificate/pjtname.crt # Server Private Key SSLCertificateKeyFile /private/etc/apache2/ssl/wildcard.certificate/pjtname.key # Server Intermediate Bundle SSLCertificateChainFile /private/etc/apache2/ssl/wildcard.certificate/ca.crt </VirtualHost> # HTTP Setting <VirtualHost *:80> ServerName users.pjtname.com DocumentRoot "/Users/<my_user_name>/Sites/pjtname.com/users.pjtname.com/public" RackEnv development <Directory "/Users/<my_user_name>/Sites/pjtname.com/users.pjtname.com/public"> Order allow,deny Allow from all </Directory> </VirtualHost> In the host file I have: ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost # PJTNAME.COM SETTING 127.0.0.1 pjtname.com 127.0.0.1 users.pjtname.com All seems to work properly because I have already set everything (I think correctly): I generated a wildcard certificate for my domains and sub-domains (in this example: *.pjtname.com) I have set base-named virtualhosts in the http.conf file listening on port :433 and :80 My browser accept certificates also if it alerts me that those aren't safe (notice: I must accept certificates for each domain\sub-domain; that is, [only] at the first time I access a domain or sub-domain over HTTPS I must do the same procedure for acceptance) and I can have access to pages using HTTPS After all this work, when I make a request using Typhoeus (I can use also the Ruby Net::Http library and the result doesn't change) from the pjtname.com RoR application: # Typhoeus request Typhoeus::Request.get("https://users.pjtname.com/") I get something like a warning about the certificate: --- &id001 !ruby/object:Typhoeus::Response app_connect_time: 0.0 body: "" code: 0 connect_time: 0.000625 # Here is the warning curl_error_message: Peer certificate cannot be authenticated with known CA certificates curl_return_code: 60 effective_url: https://users.pjtname.com/ headers: "" http_version: mock: false name_lookup_time: 0.000513 pretransfer_time: 0.0 request: !ruby/object:Typhoeus::Request after_complete: auth_method: body: ... All this means that something is wrong. So, what I have to do to avoid the "Peer certificate cannot be authenticated with known CA certificates" warning and make the HTTPS request to work? Where is\are the error\errors (I think in the Apache configuration, but where?!)? P.S.: if you need some more info, let me know.

    Read the article

  • Get Oracle Linux Certified at Much Reduced Price

    - by Antoinette O'Sullivan
    You have already heard the great news that you can now prove your knowledge on Oracle Linux 5 and 6 with the new Oracle Certified Associate, Oracle Linux 5 and 6 System Administrator exam. Until December 21th 2013, this exam is in beta phase so you can get a fully-fledged certification at a much reduced price; for example $50 in the United States or 39 euros in the euro zone. Establishing What You Need to Know Your first step is to click on the Exam Topics tab on the certification page. You will see a list of topics that you will be tested on during the certification exam. These are the areas that you need to improve your knowledge on, if you are not already expert. Registering For a Certification Exam On the certification page, click on Register for this Exam. The Pearson VUE site guides you through signing up for an event at a date and location to suit you. Preparing to Take an Exam On the certification page, click on the Exam Preparation tab. This indicates the recommended training that can help you prepare to sit the exam. The recommended training for this certification is the Oracle Linux System Administration course. You can take this very popular 5-day live instructor-led course as a: Live Virtual Event: Take the training from your own desk, no travel required. Choose from a selection of events already on the schedule to suit different timezones. In-Class: Travel to an education center to take this class. Below is a selection of events already on the schedule.  Location  Date  Delivery Language  Brussels, Belgium  18 November 2013  English  London, England  16 December 2013  English   Manchester, England  27 January 2014  English  Reading, England  12 May 2014  English  Milan, Italy  31 March 2014  Italian   Rome, Italy  10 February 2014  Italian  Utrecht, Netherlands  18 November 2013  Dutch Warsaw, Poland   9 December 2013  Polish  Bucharest, Romania  20 January 2014  Romanian  Ankara, Turkey  12 January 2014  Turkish  Istanbul, Turkey  16 December 2013  Turkish  Panjim, India  4 November 2013  English  Jakarta, Indonesia  9 December 2013  English  Kuala Lumpur, Malaysia  25 November 2013  English  Makati City, Philippines  11 November 2013  English  Singapore  25 November 2013  English  Bangkok, Thailand  11 November 2013  English  Casablanca, Morocco  16 December 2013  English  Muscat, Oman  2 March 2014  English  Johannesburg, South Africa  17 February 2014  English  Tunis, Tunisia  31 March 2014  French  Canberra, Australia 25 November 2013   English  Melbourne, Australia  19 May 2014  English  Sydney, Australia  20 January 2014  English  Mississauga, Canada  24 February 2014  English Ottawa, Canada   28 April 2014  English  Belmont, CA, United States  10 February 2014  English  Irvine, CA, United States  12 May 2014  English  San Francisco, CA, United States  18 November 2013  English  Chicago, IL, United States  14 April 2014  English  Cambridge, MA, United States  18 November 2013  English  Roseville, MA, United States  2 December 2013  English  Edison, NJ, United States  10 March 2014  English   Pittsburg, PA, United States  9 December 2013  English   Reston, VA, United States 13 January 2014   English For more information on the Oracle Linux curriculum, go to http://oracle.com/education/linux.

    Read the article

  • Oracle Database Upcoming Event dates to know

    - by mandy.ho
    February may be a short month, but it's not short of exciting Oracle events. From information packed "Real Performance Days" to participation in one of the biggest IT Security events - look out for Oracle Database and let us know if you are there with us! Feb 13-18, 2011 - Las Vegas, NV TDWI World Conference Series Join Oracle in highlighting Exadata x2-2 and x2-8, along with Oracle Business Intelligence, Enterprise Performance management and Data Warehousing solutions. Oracle will be presenting a workshop - Oracle Data Integration: Best-of-Breed Solutions for the Enterprise Wednesday, February 16, 2011 7p.m - 9p.m Glen Goodrich, Director of Product Management Christophe Dupupet, Director of Product Management, Data Integration http://events.tdwi.org/events/las-vegas-world-conference-2011/sessions/session-list.aspx Feb 14-17, 2011 - Barcelona, Spain Mobile World Congress MWC is an event where Oracle showcases the near complete breadth and depth of value that our Communications Industry strategy and Hardware and Software Solutions can deliver. Oracle supports Communications Service Providers today and delivers platforms and flexibility primed for the future. Oracle will have a two story Pavilion, along with an Oracle Java and Embedded Solutions Center - App Planet. The Exhibition times are Monday, 14th February 09.00 - 19.00 Tuesday, 15th February 09.00 - 19.00 Wednesday, 16th February 09.00 - 19.00 Thursday, 17th February 09.00 - 16.00 Have questions? Meet with Oracle Sales representatives at the Oracle Café. Open every day from 9am to 17:00pm. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=109912&src=6973382&src=6973382&Act=4 Feb 14-18, 2011 - San Francisco, CA RSA Conference As the world's most complete, open, integrated business software and hardware systems provider, Oracle can uniquely safeguard your information throughout its entire lifecycle. Learn more by attending these sessions: Cloud Computing: A Brave New World for Security and Privacy (CLD-201) Wednesday, February 16 at 8:30 a.m. Databases Under Attack - Securing Heterogeneous Database Infrastructures (DAS-301) Thursday, February 17, 2011 at 8:30 a.m. Seven Steps to Protecting Databases (DAS-402) Friday, February 18 at 10:10 a.m. RSA Conference Attendees will also have the opportunity to meet with Oracle Security Solution experts, see live product demos and more by visiting booth # 1559. Hours: Monday, February 14, 6:00 p.m. - 8:00 p.m., Tuesday, February 15, 11:00 a.m. - 6:00 p.m. and 4:30 p.m. - 6:00p.m., Wednesday, February 16, 11:00 a.m. - 6:00 p.m., and Thursday, February 17, 11:00 a.m. - 3:00 p.m. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=127657&src=6967733&src=6967733&Act=12 Feb 21-25, 2011 - Various Locations IOUG Presents - A Day of Real World Performance with Tom Kyte, Andrew Holdsworth and Graham Wood These Oracle experts will debate, discuss and delineate the best practices for designing hardware architectures, deploying Oracle databases, and developing applications that deliver the fastest possible performance for your business.Topics are covered in a conversational format - with all three chiming in where appropriate. Each presenter has their own screen projector to demonstrate their individual points to the participants. Customers will have the opportunity to get their specific performance/tuning questions answered and learn how to balance all the different environmental requirements for their applications to improve performance. Register today for the following dates and locations • February 21 in San Diego, CA • February 22 in Los Angeles, CA • February 23 in Seattle, WA • February 25 in Phoenix, AZ http://www.ioug.org/tabid/194/Default.aspx Feb 8-24 - Various Oracle Enterprise Cloud Summit This series of full-day events with cloud experts, sharing real-world best practices, reference architectures and more continues during the month of February. Attend the Oracle Enterprise Cloud Summit to learn how to: • Build a state-of-the-art cloud architecture • Leverage your existing IT investments • Optimize your IT management processes Whether you are considering a move to cloud computing or have already adopted a cloud model, this event offers you the insights you need to take full advantage of cloud computing. Check below to see if the event is coming to a city near you. http://www.oracle.com/us/corporate/events/cloud-events-214342.html

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >