Search Results

Search found 530 results on 22 pages for 'kleigh heart garcia'.

Page 16/22 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • When OneTug Just Isn&rsquo;t Enough&hellip;

    - by onefloridacoder
    I stole that from the back of a T-shirt I saw at the Orlando Code Camp 2010.  This was my first code camp and my first time volunteering for an event like this as well.  It was an awesome day.  I cannot begin to count the “aaahh”, “I did-not-know I could do that”, in the crowds and for myself.  I think it was a great day of learning for everyone at all levels.  All of the presenters were different and provided great insights into the topics they were presenting.  Here’s a list of the ones that I attended. KodeFuGuru, “Pirates vs. Ninjas” He touched on many good topics to relax some of the ways we think when we are writing out code, and still looks good, readable, etc.  As he pointed out in all of his examples, we might not always realize everything that’s going on under the covers.  He exposed a bug in his own code, and verbalized the mental gymnastics he went through when he knew there was something wrong with one of his IEnumerable implementations.  For me, it was great to hear that someone else labors over these gut reactions to code quickly snapped together, to the point that we rush to the refactor stage to fix what’s bothering us – and learn.  He has some content on extension methods that was very interesting.  My “that is so cool” moment was when he swapped out AddEntity method on an entity class and used a With extension method instead.  Some of the LINQ scales fell off my eyes at that moment, and I realized my own code could be a lot more powerful (and readable) if incorporate a few of these examples at the appropriate times.  And he cautioned as well… “don’t go crazy with this stuff”, there’s a place and time for everything.  One of his examples demo’d toward the end of the talk is on his sight where he’s chaining methods together, cool stuff. Quotes I liked: “Extension Methods - Extension methods to put features back on the model type, without impacting the type.” “Favor Declarative Code” – Check out the ? and ?? operators if you’re not already using them. “Favor Fluent Code” “Avoid Pirate Ninja Zombies!  If you see one run!” I’m definitely going to be looking at “Extract Projection” when I get into VS2010. BDD 101 – Sean Chambers http://github.com/schambers This guy had a whole host of gremlins against him, final score Sean 5, Gremlins 1.  He ran the code samples from his github repo  in the code github code viewer since the PC they school gave him to use didn’t have VS installed. He did a great job of converting the grammar between BDD and TDD, and how this style of development can be used in integration tests as well as the different types of gated builds on a CI box – he didn’t go into a discussion around CI, but we could infer that it could work. Like when we use WSSF, it does cause a class explosion to happen however the amount of code per class it limit to just covering the concern at hand – no more, no less.  As in “When I as a <Role>, expect {something} to happen, because {}”  This keeps us (the developer) from gold plating our solutions and creating less waste.  He basically keeps the code that prove out the requirement to two lines of code.  Nice. He uses SpecUnit to merge this grammar into his .NET projects and gave an overview on how this ties into writing his own BDD tests.  Some folks were familiar with Given / When / Then as story acceptance criteria and here’s how he mapped it: “Given <Context>  When <Something Happens> Then <I expect...>”  There are a few base classes and overrides in the SpecUnit framework that help with setting up the context for each test which looked very handy. Successfully Running Your Own Coding Business The speaker ran through a list of items that sounded like common sense stuff LLC, banking, separating expenses, etc.  Then moved into role playing with business owners and an ISV.  That was pretty good stuff, it pays to be a good listener all of the time even if your client is sitting on the other side of the phone tearing you head off for you – but that’s all it is, and get used to it its par for the course.  Oh, yeah always answer the phone was one simple thing that you can do to move  your business forward.  But like Cory Foy tweeted this week, “If you owe me a lot of money, don’t have a message that says your away for five weeks skiing in Colorado.”  Lots of food for thought that’s on my list of “todo’s and to-don’ts”. Speaker Idol Next, I had the pleasure of helping Russ Fustino tape this part of Code Camp as my primary volunteer opportunity that day.  You remember Russ, “know the code” from the awesome Russ’ Tool Shed series.  He did a great job orchestrating and capturing the Speaker Idol finals.   So I didn’t actually miss any sessions, but was able to see three back to back in one setting.  The idol finalists gave a 10 minute talk and very deep subjects, but different styles of talks.  No one walked away empty handed for jobs very well done.  Russ has details on his site.  The pictures and  video captured is supposed to be published on Channel 9 at a later date.  It was also a valuable experience to see what makes technical speakers effective in their talks.  I picked up quite a few speaking tips from what I heard from the judges and contestants. Design For Developers – Diane Leeper If you are a great developer, you’re probably a lousy designer.  Diane didn’t come to poke holes in what we think we can do with UI layout and design, but she provided some tools we can use to figure out metaphors for visualizing data.  If you need help with that check out Silverlight Pivot – that’s what she was getting at.  I was first introduced to her at one of John Papa’s talks last year at a Lakeland User Group meeting and she’s very passionate about design.  She was able to discuss different elements of Pivot, while to a developer is just looked cool. I believe she was providing the deck from her talk to folks after her talk, so send her an email if you’re interested.   She says she can talk about design for hours and hours – we all left that session believing her.   Rinse and Repeat Orlando Code Camp 2010 was awesome, and would totally do it again.  There were lots of folks from my shop there, and some that have left my shop to go elsewhere.  So it was a reunion of sorts and a great celebration for the simple fact that its great to be a developer and there’s a community that supports and recognizes it as well.  The sponsors were generous and the organizers were very tired, namely Esteban Garcia and Will Strohl who were responsible for making a lot of this magic happen.  And if you don’t believe me, check out the chatter on Twitter.

    Read the article

  • Threading 101: What is a Dispatcher?

    - by Water Cooler v2
    Once upon a time, I remembered this stuff by heart. Over time, my understanding has diluted and I mean to refresh it. As I recall, any so called single threaded application has two threads: a) the primary thread that has a pointer to the main or DllMain entry points; and b) For applications that have some UI, a UI thread, a.k.a the secondary thread, on which the WndProc runs, i.e. the thread that executes the WndProc that recieves messages that Windows posts to it. In short, the thread that executes the Windows message loop. For UI apps, the primary thread is in a blocking state waiting for messages from Windows. When it recieves them, it queues them up and dispatches them to the message loop (WndProc) and the UI thread gets kick started. As per my understanding, the primary thread, which is in a blocking state, is this: C++ while(getmessage(/* args &msg, etc. */)) { translatemessage(&msg, 0, 0); dispatchmessage(&msg, 0, 0); } C# or VB.NET WinForms apps: Application.Run( new System.Windows.Forms() ); Is this what they call the Dispatcher? My questions are: a) Is my above understanding correct? b) What in the name of hell is the Dispatcher? c) Point me to a resource where I can get a better understanding of threads from a Windows/Win32 perspective and then tie it up with high level languages like C#. Petzold is sparing in his discussion on the subject in his epic work. Although I believe I have it somewhat right, a confirmation will be relieving.

    Read the article

  • Did you love the game Mouse Trap as a kid, or something similar? (Programmer Psychology) [closed]

    - by Robert Oschler
    When I was a kid I absolutely fell in love with games that had as a core feature, the need to understand interconnecting structures. My favorite of all time was Mouse Trap. For the younger crowd out there, this was a very cool board game where you built the mouse trap out of the included plastic pieces as you played, with the end goal to trigger the mouse trap. The fully assembled mouse trap was a Rube Goldberg style invention where one operation triggered the next and the next and so on, until the last step dropped a cage on a little plastic mouse. Sometimes when I'm programming and I'm reviewing a particularly complex interaction between components and objects, while tracking the flow path mentally, I say to myself "It's a Mouse Trap!" and I wonder if my early addiction to that game and others like it was portent to my becoming a programmer. Another realization I have sometimes when looking at my code is how daunted I feel at the share complexity involved, followed by a darker comedic amazement at my expectation that it will all come together and work. How about you? Did you find yourself drawn to games that at their heart featured interacting control paths when growing up? Robert.

    Read the article

  • Reset.css and then a Set.css

    - by Sixfoot Studio
    I have, for a while now been using a reset.css file to reset everything before I start laying out my html designs. The reset is great in that it allows one to better control attributes such as margins, padding, line-height etc for all browsers. In essence the flatliner of css files. Now to get the heart beating again, I need a "set.css" file. So what I have done is created an Html file with all the possible elements on the page to then go and set the padding, margins etc of the h1, h2, p, td etc. I need some help with this as I am not sure what the defaults normally are. I had a look at the Firefox default css file that's used to generate all these attributes on a raw html file but it doesn't cover all the scenarios I could come up with when developing a site. Here's an example of the set.html file (a work in progress) which can be used as a lorem ipsum filler to add to your first page in a cms and then to style with a "set.css" file http://www.sixfoot.co.za/labs/Html-Css/set.html I'd appreciate it if someone knows if something like a set.css file exists or if someone could tell me what the general padding and margins are in cases like this when you have reset the css. Cheers, James

    Read the article

  • Why do people hate SQL cursors so much?

    - by Steven A. Lowe
    I can understand wanting to avoid having to use a cursor due to the overhead and inconvenience, but it looks like there's some serious cursor-phobia-mania going on where people are going to great lengths to avoid having to use one for example, one question asked how to do something obviously trivial with a cursor and the accepted answer proposed using a common table expression (CTE) recursive query with a recursive custom function, even though this limits the number of rows that could be processed to 32 (due to recursive call limit in sql server). This strikes me as a terrible solution for system longevity, not to mention a tremendous effort just to avoid using a simple cursor. what is the reason for this level of insane hatred? has some 'noted authority' issued a fatwa against cursors? does some unspeakable evil lurk in the heart of cursors that corrupts the morals of the children or something? wiki question, more interested in the answer than the rep thanks in advance! Related Info: http://stackoverflow.com/questions/37029/sql-server-fast-forward-cursors EDIT: let me be more precise: I understand that cursors should not be used instead of normal relational operations, that is a no-brainer. What I don't understand is people going waaaaay out of their way to avoid cursors like they have cooties or something, even when a cursor is a simpler and/or more efficient solution. It's the irrational hatred that baffles me, not the obvious technical efficiencies.

    Read the article

  • How can I place validating constraints on my method input parameters?

    - by rcampbell
    Here is the typical way of accomplishing this goal: public void myContractualMethod(final String x, final Set<String> y) { if ((x == null) || (x.isEmpty())) { throw new IllegalArgumentException("x cannot be null or empty"); } if (y == null) { throw new IllegalArgumentException("y cannot be null"); } // Now I can actually start writing purposeful // code to accomplish the goal of this method I think this solution is ugly. Your methods quickly fill up with boilerplate code checking the valid input parameters contract, obscuring the heart of the method. Here's what I'd like to have: public void myContractualMethod(@NotNull @NotEmpty final String x, @NotNull final Set<String> y) { // Now I have a clean method body that isn't obscured by // contract checking If those annotations look like JSR 303/Bean Validation Spec, it's because I borrowed them. Unfortunitely they don't seem to work this way; they are intended for annotating instance variables, then running the object through a validator. Which of the many Java design-by-contract frameworks provide the closest functionality to my "like to have" example? The exceptions that get thrown should be runtime exceptions (like IllegalArgumentExceptions) so encapsulation isn't broken.

    Read the article

  • Printing an invisible NSView

    - by Rodger Wilson
    Initially I created a simple program with a custom NSView. I drew a picture (certificate) and printed it! beautiful! Everything worked great! I them moved my custom NSView to an existing application. My hope was that when a user hit print it would print this certificate. Simple enough. I figured a could have a NSView pointer in my controller code. Then at initialization I would populate the pointer. Then when someone wanted to print the certificate it would print. The problem is that all of my drawing code is in the "drawRect" method. This method doesn't get called because this view is never displayed in a window. I have heart that others use non-visible NSView objects just for printing. What do I need to do. I really don't want to show this view to the screen. Rodger

    Read the article

  • Should I release NSString before assigning a new value to it?

    - by Elliot Chen
    Hi, Please give me some suggestions about how to change a NSString variable. At my class, I set a member var: NSString *m_movieName; ... @property(nonatomic, retain) NSString *m_movieName; At viewDidLoad method, I assign a default name to this var: -(void)viewDidLoad{ NSString *s1 = [[NSString alloc] initWithFormat:@"Forrest Gump"]; self.m_movieName = s1; ... [s1 release]; [super viewDidLoad] } At some function, I want to give a new name to this var, so I did like: -(void)SomeFunc{ NSString *s2 = [[NSString alloc] initWithFormat:@"Brave Heart"]; //[self.movieName release]; // ??????? Should perform here? self.m_moiveName = s2; [s2 release]; } I know, NSString* var is just a pointer to an allocated memory block, and 'assign' operation will increment this memory block's using count. For my situation, should I release m_movieName before assigning a value to it? If I do not release it (via [self.movieName release]), when and where will the previous block be released? Thanks for your help very much!

    Read the article

  • Neural Network with softmax activation

    - by Cambium
    This is more or less a research project for a course, and my understanding of NN is very/fairly limited, so please be patient :) ============== I am currently in the process of building a neural network that attempts to examine an input dataset and output the probability/likelihood of each classification (there are 5 different classifications). Naturally, the sum of all output nodes should add up to 1. Currently, I have two layers, and I set the hidden layer to contain 10 nodes. I came up with two different types of implementations 1) Logistic sigmoid for hidden layer activation, softmax for output activation 2) Softmax for both hidden layer and output activation I am using gradient descent to find local maximums in order to adjust the hidden nodes' weights and the output nodes' weights. I am certain in that I have this correct for sigmoid. I am less certain with softmax (or whether I can use gradient descent at all), after a bit of researching, I couldn't find the answer and decided to compute the derivative myself and obtained softmax'(x) = softmax(x) - softmax(x)^2 (this returns an column vector of size n). I have also looked into the MATLAB NN toolkit, the derivative of softmax provided by the toolkit returned a square matrix of size nxn, where the diagonal coincides with the softmax'(x) that I calculated by hand; and I am not sure how to interpret the output matrix. I ran each implementation with a learning rate of 0.001 and 1000 iterations of back propagation. However, my NN returns 0.2 (an even distribution) for all five output nodes, for any subset of the input dataset. My conclusions: o I am fairly certain that my gradient of descent is incorrectly done, but I have no idea how to fix this. o Perhaps I am not using enough hidden nodes o Perhaps I should increase the number of layers Any help would be greatly appreciated! The dataset I am working with can be found here (processed Cleveland): http://archive.ics.uci.edu/ml/datasets/Heart+Disease

    Read the article

  • Usability for content editors: Drupal or PHP framework?

    - by Jim
    Greetings: I am going to develop a basic Web site that supports some custom content types, is multilingual, and has content moderation workflow for a restricted group of content editors. This seems like an obvious choice for Drupal, except... the content editors will have little computer experience. In my opinion, that is a show-stopper for Drupal. For example, placing arbitrary inline images in content is a task that WordPress does well. I find Drupal's alternatives (IMCE, img_assist, etc.) clunky and not well integrated, and that will be a problem for this group of content editors. Also, none of the Drupal content workflow modules I tried seemed well-integrated; they all had a "tacked on" feel to them. As an admin I can understand why an "Accessible content" menu item (via Module Grants module) is necessary to view draft content (fixed in D7 but I can't wait for all the modules to be ported), but I'm pretty sure it'll confuse the content editors. An alternative is to use a PHP framework. I've read a few threads suggesting that it will take roughly the same amount of time using a good framework as it will to bend Drupal to my willing... maybe wishful thinking? I'm looking at Symfony, which gives me a basic auto-generated back-end, but which I believe I can customize to my heart's content. How do you make Drupal accessible to non-savvy content editors? If you recommend a PHP framework, which one? TIA!

    Read the article

  • Should I go vor Arrays or Objects in PHP in a CouchDB/Ajax app?

    - by karlthorwald
    I find myself converting between array and object all the time in PHP application that uses couchDB and Ajax. Of course I am also converting objects to JSON and back (for sometimes couchdb but mostly Ajax), but this is not so much disturbing my workflow. At the present I have php objects that are returned by the CouchDB modules I use and on the other hand I have the old habbit to return arrays like array("error"="not found","data"=$dataObj) from my functions. This leads to a mixed occurence of real php objects and nested arrays and I cast with (object) or (array) if necessary. The worst thing is that I know more or less by heart what a function returns, but not what type (array or object), so I often run into type errors. My plan is now to always cast arrays to objects before returning from a function. Of course this implies a lot of refactoring. Is this the right way to go? What about the conversion overhead? Other ideas or tips? Edit: Kenaniah's answer suggests I should go the other way, this would mean I'd cast everything to arrays. And for all the Ajax / JSON stuff and also for CouchDB I would use $myarray = json_decode($json_data,$assoc = false) Even more work to change all the CouchDB and Ajax functions but in the end I have better code.

    Read the article

  • Debug NAudio MP3 reading difference?

    - by Conrad Albrecht
    My code using NAudio to read one particular MP3 gets different results than several other commercial apps. Specifically: My NAudio-based code finds ~1.4 sec of silence at the beginning of this MP3 before "audible audio" (a drum pickup) starts, whereas other apps (Windows Media Player, RealPlayer, WavePad) show ~2.5 sec of silence before that same drum pickup. The particular MP3 is "Like A Rolling Stone" downloaded from Amazon.com. Tested several other MP3s and none show any similar difference between my code and other apps. Most MP3s don't start with such a long silence so I suspect that's the source of the difference. Debugging problems: I can't actually find a way to even prove that the other apps are right and NAudio/me is wrong, i.e. to compare block-by-block my code's results to a "known good reference implementation"; therefore I can't even precisely define the "error" I need to debug. Since my code reads thousands of samples during those 1.4 sec with no obvious errors, I can't think how to narrow down where/when in the input stream to look for a bug. The heart of the NAudio code is a P/Invoke call to acmStreamConvert(), which is a Windows "black box" call which I can't think how to error-check. Can anyone think of any tricks/techniques to debug this?

    Read the article

  • What is the proper way to URL encode Unicode characters?

    - by Josh Gibson
    I know of the non-standard %uxxxx scheme but that doesn't seem like a wise choice since the scheme has been rejected by the W3C. Some interesting examples: The heart character. If I type this into my browser: http://www.google.com/search?q=? Then copy and paste it, I see this URL http://www.google.com/search?q=%E2%99%A5 which makes it seem like Firefox (or Safari) is doing this. urllib.quote_plus(x.encode("latin-1")) '%E2%99%A5' which makes sense, except for things that can't be encoded in Latin-1, like the triple dot character. … If I type the URL http://www.google.com/search?q=… into my browser then copy and paste, I get http://www.google.com/search?q=%E2%80%A6 back. Which seems to be the result of doing urllib.quote_plus(x.encode("utf-8")) which makes sense since … can't be encoded with Latin-1. But then its not clear to me how the browser knows whether to decode with UTF-8 or Latin-1. Since this seems to be ambiguous: In [67]: u"…".encode('utf-8').decode('latin-1') Out[67]: u'\xc3\xa2\xc2\x80\xc2\xa6' works, so I don't know how the browser figures out whether to decode that with UTF-8 or Latin-1. What's the right thing to be doing with the special characters I need to deal with?

    Read the article

  • javascript scope problem when lambda function refers to a variable in enclosing loop

    - by Stefan Blixt
    First question on stackoverflow :) Hope I won't embarrass myself... I have a javascript function that loads a list of albums and then it creates a list item for each album. The list item should be clickable, so I call jQuery's click() with a function that does stuff. I do this in a loop. My problem is that all items seem to get the same click function, even though I try to make a new one that does different stuff in each iteration. Another possibility is that the iteration variable is global somehow, and the function refers to it. Code below. debug() is just an encapsulation of Firebug's console.debug(). function processAlbumList(data, c) { for (var album in data) { var newAlbum = $('<li class="albumLoader">' + data[album].title + '</li>').clone(); var clickAlbum = function() { debug("contents: " + album); }; debug("Album: " + album + "/" + data[album].title); $('.albumlist').append(newAlbum); $(newAlbum).click(clickAlbum); } } Here is a transcript of what it prints when the above function runs, after that are some debug lines caused by me clicking on different items. It always prints "10", which is the last value that the album variable takes (there are 10 albums). Album: 0/Live on radio.electro-music.com Album: 1/Doodles Album: 2/Misc Stuff Album: 3/Drawer Collection Album: 4/Misc Electronic Stuff Album: 5/Odds & Ends Album: 6/Tumbler Album: 7/Bakelit 32 Album: 8/Film Album: 9/Bakelit Album: 10/Slow Zoom/Atomic Heart contents: 10 contents: 10 contents: 10 contents: 10 contents: 10 Any ideas? Driving me up the wall, this is. :) /Stefan

    Read the article

  • Java: how to tell if a line in a text file was supposed to be blank?

    - by defn
    I'm working on a project in which I have to read in a Grammar file (breaking it up into my data structure), with the goal of being able to generate a random "DearJohnLetter". My problem is that when reading in the .txt file, I don't know how find out whether the file was supposed to be a completely blank line or not, which is detrimental to the program. Here is an example of part of the file, How do i tell if the next line was supposed to be a blank line? (btw I'm just using a buffered reader) Thanks! <start> I have to break up with you because <reason> . But let's still <disclaimer> . <reason> <dubious-excuse> <dubious-excuse> , and also because <reason> <dubious-excuse> my <person> doesn't like you I'm in love with <another> I haven't told you this before but <harsh> I didn't have the heart to tell you this when we were going out, but <harsh> you never <romantic-with-me> with me any more you don't <romantic> any more my <someone> said you were bad news

    Read the article

  • Update a tableView with a plist took from another table

    - by Pheel
    Background: I have a tab bar application, which has a tableView as the "heart" of the app. It loads data from a plist and, through a button that checks if there are any updates on the remote plist file, updates the local plist with the remote contents. Then, i have another tableView, that should display only those plist items that have a bool value set to YES. Now i want to add a button to the second table that reloads the plist took from the first table. Expected: When i update the local plist from the first table and when i press the button on the second table, the 2nd table is supposed to update and show the cells with that bool value set to YES. (Note: I set YES as default to some items on plist). What happens: The first table updates its content from remote. The second table shows the old items with the value set to YES. When i press the button to refresh data, it reads the plist fine (by logging it, it has the same contents of the first table -only those set to YES-),but it doesn't update data even if i have [self.tableView reloadData];. When i close the app and open it again, the second table is filled with the right items. :\ Code i'm using: //Reading Plist { NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSCachesDirectory, NSUserDomainMask, YES); NSString *plistPath = [[documentPaths lastObject] stringByAppendingPathComponent:@"myPlist.plist"]; NSFileManager *fMgr = [NSFileManager defaultManager]; if (![fMgr fileExistsAtPath:plistPath]) { plistPath = [[NSBundle mainBundle] pathForResource:@"myPlist" ofType:@"plist"]; } NSMutableArray *returnArr = [NSMutableArray arrayWithContentsOfFile:plistPath]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"isFav == YES"]; for (NSDictionary *sect in returnArr) { NSArray *arr = [sect objectForKey:@"Rows"]; [sect setValue:[arr filteredArrayUsingPredicate:predicate] forKey:@"Rows"]; } [self.tableView reloadData]; } //Refresh data button - (void) refreshTable:(id)sender { NSLog(@"plist read"); [self readPlist]; NSLog(@"refreshed plist:%@",[self readPlist]); [self.tableView reloadData]; } Does anyone know why the table is not updating?

    Read the article

  • Should I go for Arrays or Objects in PHP in a CouchDB/Ajax app?

    - by karlthorwald
    I find myself converting between array and object all the time in PHP application that uses couchDB and Ajax. Of course I am also converting objects to JSON and back (for sometimes couchdb but mostly Ajax), but this is not so much disturbing my workflow. At the present I have php objects that are returned by the CouchDB modules I use and on the other hand I have the old habbit to return arrays like array("error"="not found","data"=$dataObj) from my functions. This leads to a mixed occurence of real php objects and nested arrays and I cast with (object) or (array) if necessary. The worst thing is that I know more or less by heart what a function returns, but not what type (array or object), so I often run into type errors. My plan is now to always cast arrays to objects before returning from a function. Of course this implies a lot of refactoring. Is this the right way to go? What about the conversion overhead? Other ideas or tips? Edit: Kenaniah's answer suggests I should go the other way, this would mean I'd cast everything to arrays. And for all the Ajax / JSON stuff and also for CouchDB I would use $myarray = json_decode($json_data,$assoc = true); //EDIT: changed to true, whcih is what I really meant Even more work to change all the CouchDB and Ajax functions but in the end I have better code.

    Read the article

  • Deep Zoom in Ajax - Possible? Any examples out there?

    - by Phil
    I have an idea to implement a deep zoom type interface hosted in a browser for sports training data (speed, distance, heart rate etc.) However, rather than images I actually want to zoom into a hierarchy of information. For example, the initial display would contain a grid of years - hover over 2008, for example, and spin the mouse wheel (or click) will zoom into that year but during the zoom I want 2008 to fade out and be replaced with a calendar of months. Again zoom into a month and the months are replaced with the months calendar, zoom into a day and you finally see a chart with the training data plotted on it. All the time only dates with actual data would be highlighted in some fashion. My question is whether this would even be possible and whether anyone has seen examples of this already. I'm imagining that most of the time the next level of information could be cached in the browser (in fact, because this is calendar-based, I can calculate most of that and cache the dates to be highlighted.) I could also zoom into an empty chart whilst an Ajax thread is fetching the data to display. I've never tried anything like this before and I'm especially interested in whether DHTML would be capable of this sort of zoom (I suspect not and I would have to resort to Silverlight) and whether the Ajax execution would be uninterrupted whilst the browser rendering thread is kept busy zooming.

    Read the article

  • PDO using singleton stored as class properity

    - by Misiur
    Hi again. OOP drives me crazy. I can't move PDO to work. Here's my DB class: class DB extends PDO { public function &instance($dsn, $username = null, $password = null, $driver_options = array()) { static $instance = null; if($instance === null) { try { $instance = new self($dsn, $username, $password, $driver_options); } catch(PDOException $e) { throw new DBException($e->getMessage()); } } return $instance; } } It's okay when i do something like this: try { $db = new DB(DB_TYPE.':host='.DB_HOST.';dbname='.DB_NAME, DB_USER, DB_PASS); } catch(DBException $e) { echo $e->getMessage(); } But this: try { $db = DB::instance(DB_TYPE.':host='.DB_HOST.';dbname='.DB_NAME, DB_USER, DB_PASS); } catch(DBException $e) { echo $e->getMessage(); } Does nothing. I mean, even when I use wrong password/username, I don't get any exception. Second thing - I have class which is "heart" of my site: class Core { static private $instance; public $db; public function __construct() { if(!self::$instance) { $this->db = DB::instance(DB_TYPE.':hpost='.DB_HOST.';dbname='.DB_NAME, DB_USER, DB_PASS); } return self::$instance; } private function __clone() { } } I've tried to use "new DB" inside class, but this: $r = $core->db->query("SELECT * FROM me_config"); print_r($r->fetch()); Return nothing. $sql = "SELECT * FROM me_config"; print_r($core->db->query($sql)); I get: PDOStatement Object ( [queryString] => SELECT * FROM me_config ) I'm really confused, what am I doing wrong?

    Read the article

  • Can someone confirm how Microsoft Excel 2007 internally represents numbers?

    - by Jon
    I know the IEEE 754 floating point standard by heart as I had to learn it for an exam. I know exactly how floating point numbers are used and the problems that they can have. I can manually do any operation on the binary representation of floating point numbers. However, I have not found a single source which unambiguously states that excel uses 64 bit floating point numbers to internally represent every single cell "type" in excel except for text. I have no idea whether some of the types use signed or unsigned integers and some use 64 bit floating point. I have found literally trillions of articles which 1) describe floating point numbers and then 2) talk about being careful with excel because of floating point numbers. I have not found a single statement saying "all types are 64 bit floating point numbers except text". I have not found a single statement which says "changing the type of a cell only changes its visual representation and not its internal representation, unless you change the type from text to some other type which is not text or you change some other type which is not text to text". This is literally all I want to know, and it's so simple and axiomatic that I am amazed that I can find trillions of articles and pages which talk around these statements but do not state them directly.

    Read the article

  • What is the Pythonic way to implement a simple FSM?

    - by Vicky
    Yesterday I had to parse a very simple binary data file - the rule is, look for two bytes in a row that are both 0xAA, then the next byte will be a length byte, then skip 9 bytes and output the given amount of data from there. Repeat to the end of the file. My solution did work, and was very quick to put together (even though I am a C programmer at heart, I still think it was quicker for me to write this in Python than it would have been in C) - BUT, it is clearly not at all Pythonic and it reads like a C program (and not a very good one at that!) What would be a better / more Pythonic approach to this? Is a simple FSM like this even still the right choice in Python? My solution: #! /usr/bin/python import sys f = open(sys.argv[1], "rb") state = 0 if f: for byte in f.read(): a = ord(byte) if state == 0: if a == 0xAA: state = 1 elif state == 1: if a == 0xAA: state = 2 else: state = 0 elif state == 2: count = a; skip = 9 state = 3 elif state == 3: skip = skip -1 if skip == 0: state = 4 elif state == 4: print "%02x" %a count = count -1 if count == 0: state = 0 print "\r\n"

    Read the article

  • Are Java developers really paid more than .Net developers? Also, should I just try and work with C?(

    - by Jon
    Ok, so I graduated about a year and a half ago. In college days I used to be really good (and keen) on C/C++. I've even done some multithreading and socket programming in C. Created networked GUI apps for linux using GTK etc.Now,I've been working since I graduated and well, let's say, I've been stereotyped with .net. That's all I have experience with in these years (Vb.net,asp.net,javascript). I'm pretty comfortable with all of the above and also SQL server.a)Cutting to the chase, I've begun to notice how .net jobs don't seem to pay all that well as Java. Jobs seeking similar number of yrs of experience offer almost twice for java developers. Does it mean I should consider switching?b)My heart still goes out for C. As a surrogate I've tried working with VC++ 6.0 (I know they aren't the same!). I've tried my hand with DDK,SDK,COM etc. Should I try finding jobs there or am I too inexperienced. Somehow, I can't find any openings for C. Where are they? Sometimes I get frustrated and feel that maybe I should just go for MS or something. Possibly that'll help me in landing with 'fatter paying jobs' in the field that I wish to work.

    Read the article

  • Where to start when doing a Domain Model?

    - by devoured elysium
    Let's say I've made a list of concepts I'll use to draw my Domain Model. Furthermore, I have a couple of Use Cases from which I did a couple of System Sequence Diagrams. When drawing the Domain Model, I never know where to start from: Designing the model as I believe the system to be. This is, if I am modelling a the human body, I start by adding the class concepts of Heart, Brain, Bowels, Stomach, Eyes, Head, etc. Start by designing what the Use Cases need to get done. This is, if I have a Use Case which is about making the human body swallow something, I'd first draw the class concepts for Mouth, Throat, Stomatch, Bowels, etc. The order in which I do things is irrelevant? I'd say probably it'd be best to try to design from the Use Case concepts, as they are generally what you want to work with, not other kind of concepts that although help describe the whole system well, much of the time might not even be needed for the current project. Is there any other approach that I am not taking in consideration here? How do you usually approach this? Thanks

    Read the article

  • Do I need to write a trigger for such a simple constraint?

    - by Paul Hanbury
    I really had a hard time knowing what words to put into the title of my question, as I am not especially sure if there is a database pattern related to my problem. I will try to simplify matters as much as possible to get directly to the heart of the issue. Suppose I have some tables. The first one is a list of widget types: create table widget_types ( widget_type_id number(7,0) primary key, description varchar2(50) ); The next one contains icons: create table icons ( icon_id number(7,0) primary key, picture blob ); Even though the users get to select their preferred widget, there is a predefined subset of widgets that they can choose from for each widget type. create table icon_associations ( widget_type_id number(7,0) references widget_types, icon_id number(7,0) references icons, primary key (widget_type_id, icon_id) ); create table icon_prefs ( user_id number(7,0) references users, widget_type_id number(7,0), icon_id number(7,0), primary key (user_id, widget_type_id), foreign key (widget_type_id, icon_id) references icon_associations ); Pretty simple so far. Let us now assume that if we are displaying an icon to a user who has not set up his preferences, we choose one of the appropriate images associated with the current widget. I'd like to specify the preferred icon to display in such a case, and here's where I run into my problem: alter table icon_associations add ( is_preferred char(1) check( is_preferred in ('y','n') ) ) ; I do not see how I can enforce that for each widget_type there is one, and only one, row having is_preferred set to 'y'. I know that in MySQL, I am able to write a subquery in my check constraint to quickly resolve this issue. This is not possible with Oracle. Is my mistake that this column has no business being in the icon_associations table? If not where should it go? Is this a case where, in Oracle, the constraint can only be handled with a trigger? I ask only because I'd like to go the constraint route if at all possible. Thanks so much for your help, Paul

    Read the article

  • Simple HTML interface to XSD?

    - by Visage
    I'm writing an app that, at its heart, uses a hierarchical tree of nodes in XML, it looks like this: <node> <name>Node1</name> <Attribute1>Something</Attribute1> <Attribute2>SomethingElse</Attribute2> <child>Node2</child> <child>Node4</child> <child>Node7</child> </node> And so on (all child elements must refer to an existing node, though the node inquestion doesnt have to precede the first reference to it) For a simple structure like this is there a simple tool to generate a html page that will allow a user to enter Nodes and dynamically update a server-side xml file? Im basically writing a tool that will use such a file, but the people who's job it is to create the file arent especially techno-literate, so creating the XML by hand is a no-no. I could hand-crank one fairly quickly, but if I can get a tool to do it, even better (especially as the format may change in future)....

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22  | Next Page >