Search Results

Search found 1607 results on 65 pages for 'loud fan'.

Page 16/65 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Looking for comprehensive computer monitoring software

    - by cornjuliox
    Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

    Read the article

  • Windows 7 hangs after going into sleep a second time

    - by Brian Stephenson
    I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

    Read the article

  • Linux Mint Constantly freezing on Dell XPS L502X

    - by Josh
    I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

    Read the article

  • Troubleshooting an overheating CPU

    - by Jeff Fry
    I & my father just recently put together a new PC. Specs below. From the very beginning, on boot it will often complain that the CPU is too hot. If I sit in BIOS and watch the CPU, it'll drop back down from red to blue (<72C), at which point I've tended to just boot into Windows...and haven't had any problems. In fact, I've played a couple hours straight of Skyrim at max settings, and not had any visible issues. That said, I've occasionally walked away & come back to find that it's crashed. Yesterday, it crashed (while idle) twice in 12 hours, which shifted the balance from busy-with-life to nervous-I'm-about-to-melt-something. I just installed Core Temp which is showing my 4 cores fluxuating between 70-98C. I'm guessing at this point that the CPU fan may be incorrectly installed or defective. My first thought is to either (a) add water cooling (which the case supports) and / or (b) replace the CPU fan with an after-market one. That said, I'm very open to suggestions. A note, while I certainly don't want to burn money here, I have a baby coming any day now and am still unpacking from a recent move so if I have a choice between an option that costs money and another that takes a while...I'll happily spend a bit extra. Side question: Should I be nervous to even have this on at this point? Let me know if there's something useful I could add to my report. Otherwise, I'm looking forward to your suggestions! Thanks. CPU Intel i7-2600 CPU w/ stock fan Other HW ASUS P8Z68-V Pro motherboard 64G SSD boot drive 4 older SATA HDs GIGABYTE ATI Radeon HD6950 1 GB DDR5 8G Kingston T1 Series RAM Corsair 650W Gold Certified power supply Antec P280 case

    Read the article

  • Content for fans and non fans fbml?

    - by Jamie redmond
    I know that using fb:visible-to-conection allows you to display content to fans but how do I hide content from fans? Example if I have "you must be fan to view this" how do I remove that text when they are a fan? I'm using static fbml app btw. Any help appreciated.

    Read the article

  • How to design a command line program and keep it open for a future GUI?

    - by systempuntoout
    What are some best practices to keep in mind when developing a script program that could be integrated with a GUI, probably by somebody else, in the future? Example scenario: i develop a fancy python CLI program that scrapes every unicorn images from the web i decide to publish it on github a unicorn fan programmer decide to take the sources and build a GUI on them. he gives up because my code is a mess How do i avoid step 4 and let unicorn fan programmer build his GUI without hassle?

    Read the article

  • Facebook Graph API - likes returns me an empty set...

    - by Vinch
    When I try to get all my "likes" (formerly fan pages) on Facebook Graph API, sometimes it returns me an empty set: { "data": [ ] } I tried with https://graph.facebook.com/me/likes?access_token=MY_ACCESS_TOKEN and with graph.facebook.com/vinch/likes?access_token=MY_ACCESS_TOKEN but the result is exactly the same (empty). Any idea of what it can be? I need it to know if a user likes (is fan of) a specific page.

    Read the article

  • How to design a command line program reusable for a future development of a GUI?

    - by systempuntoout
    What are some best practices to keep in mind when developing a script program that could be integrated with a GUI, probably by somebody else, in the future? Possible scenario: i develop a fancy python CLI program that scrapes every unicorn images from the web i decide to publish it on github a unicorn fan programmer decides to take the sources and build a GUI on them. he\she gives up because my code is not reusable How do i avoid step four and let unicorn fan programmer build his\her GUI without hassle?

    Read the article

  • Is there a way to make PHP's SplHeap recalculate? (aka: add up-heap to SplHeap?)

    - by md2k7
    I am using an SplHeap to hold graph nodes of a tree with directed edges that will be traversed from the leaves to the root. For this, I precalculate the "fan-in" of nodes and put them into the heap so that I can always retrieve the node with the smallest fan-in (0) from it. After visiting a node, I reduce the fan-in of its successor by 1. Then obviously, the heap needs to be recalculated because the successor is now in the wrong place there. I have tried recoverFromCorruption(), but it doesn't do anything and keeps the heap in the wrong order (node with larger fanIn stays in front of smaller fanIn). As a workaround, I'm now creating a new heap after each visit, amounting to a full O(N*log(N)) sort each time. It should be possible, however, to make up-heap operations on the changed heap entry until it's in the right position in O(log(N)). The API for SplHeap doesn't mention an up-heap (or deletion of an arbitrary element - it could then be re-added). Can I somehow derive a class from SplHeap to do this or do I have to create a pure PHP heap from scratch? EDIT: Code example: class VoteGraph { private $nodes = array(); private function calculateFanIn() { /* ... */ } // ... private function calculateWeights() { $this->calculateFanIn(); $fnodes = new GraphNodeHeap(); // heap by fan-in ascending (leaves are first) foreach($this->nodes as $n) { // omitted: filter loops $fnodes->insert($n); } // traversal from leaves to root while($fnodes->valid()) { $node = $fnodes->extract(); // fetch a leaf from the heap $successor = $this->nodes[$node->successor]; // omitted: actual job of traversal $successor->fanIn--; // will need to fix heap (sift up successor) because of this //$fnodes->recoverFromCorruption(); // doesn't work for what I want // workaround: rebuild $fnodes from scratch $fixedHeap = new GraphNodeHeap(); foreach($fnodes as $e) $fixedHeap->insert($e); $fnodes = $fixedHeap; } } } class GraphNodeHeap extends SplHeap { public function compare($a, $b) { if($a->fanIn === $b->fanIn) return 0; else return $a->fanIn < $b->fanIn ? 1 : -1; } }

    Read the article

  • Social Business Forum Milano: Day 2

    - by me
    @YourService. The business world has flipped and small business can capitalize  by Frank Eliason (twitter: @FrankEliason ) Technology and social media tools have made it easier than ever for companies to communicate with consumers. They can listen and join in on conversations, solve problems, get instant feedback about their products and services, and more. So why, then, are most companies not doing this? Instead, it seems as if customer service is at an all time low, and that the few companies who are choosing to focus on their customers are experiencing a great competitive advantage. At Your Service explains the importance of refocusing your business on your customers and your employees, and just how to do it. Explains how to create a culture of empowered employees who understand the value of a great customer experience Advises on the need to communicate that experience to their customers and potential customers Frank Eliason, recognized by BusinessWeek as the 'most famous customer service manager in the US, possibly in the world,' has built a reputation for helping large businesses improve the way they connect with customers and enhance their relationships Quotes from the Audience: Bertrand Duperrin ?@bduperrin social service is not about shutting up the loudest cutsomers ! #sbf12 @frankeliason Paolo Pelloni ?@paolopelloniGautam Ghosh ?@GautamGhosh RT @cecildijoux: #sbf12 @frankeliason you need to change things and fix the approach it's not about social media it's about driving change  Peter H. Reiser ?@peterreiser #sbf12 Company Experience = Product Experience + Customer Interactions + Employee Experience @yourservice Engage or lose! Socialize, mobilize, conversify: engage your employees to improve business performance Christian Finn (twitter: @cfinn) First Christian was presenting the flying monkey   Then he outlined the four principals to fix the Intranet: 1. Socalize the Intranet 2. Get Thee to a Single Repository 3. Mobilize the Intranet 4. Conversationalize Your Processes Quotes from the Audience: Oscar Berg ?@oscarberg Engaged employees think their work bring out the best of their ideas @cfinn #sbf12 http://pic.twitter.com/68eddp48 John Stepper ?@johnstepper I like @cfinn's "conversify your processes" A nice related concept to "narrating your work", part of working out loud. http://johnstepper.com/2012/05/26/working-out-loud-your-personal-content-strategy/ Oscar Berg ?@oscarberg Organizations are talent markets - socializing your intranet makes this market function better @cfinn #sbf12 For profit, productivity, and personal benefit: creating a collaborative culture at Deutsche Bank John Stepper (twitter:@johnstepper) Driving adoption of collaboration + social media platforms at Deutsche Bank. John shared some great best practices on how to deploy an enterprise wide  community model  in a large company. He started with the most important question What is the commercial value of adding social ? Then he talked about the success of Community of Practices deployment and outlined some key use cases including the relevant measures to proof the ROI of the investment. Examples:  Community of practice -> measure: systematic collection of value stories  Self-service website  -> measure: based on representative models Optimizing asset inventory - > measure: Actual counts  This use case was particular interesting.  It is a crowd sourced spending/saving of infrastructure model.  User can cancel IT services they don't need (as example Software xx).  5% of the saving goes to social responsibility projects. The John outlined some  best practices on how to address the WIIFM (What's In It For Me) question of the individual users:  - change from hierarchy to graph -  working out loud = observable work + narrating  your work  - add social skills to career objectives - example: building a purposeful social network course/training as part of the job development curriculum And last but not least John gave some important tips on how to get senior management buy-in by establishing management sponsored division level collaboration boards which defines clear uses cases and measures. This divisional use cases are then implemented using a common social platform.  Thanks John - I learned a lot from your presentation!   Quotes from the Audience: Ana Silva ?@AnaDataGirl #sbf12 what's in it for individuals at Deutsche Bank? Shapping their reputations in a big org says @johnstepper #e20Ana Silva ?@AnaDataGirl Any reason why not? MT @magatorlibero #sbf12 is Deutsche B. experience on applying social inside company applicable to Italian people? Oscar Berg ?@oscarberg Your career is not a ladder, it is a network that opens up opportunities - @johnstepper #sbf12 Oscar Berg ?@oscarberg @johnstepper: Institutionalizing collaboration is next - collaboration woven into the fabric of daily work #sbf12 Ana Silva ?@AnaDataGirl #sbf12 @johnstepper talking about how Deutsche Bank is using #socbiz to build purposeful CoP & save money

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • JavaFX Threading issue - GUI freezing while method call ran.

    - by David Meadows
    Hi everyone, I hoped someone might be able to help as I'm a little stumped. I have a javafx class which runs a user interface, which includes a button to read some text out loud. When you press it, it invokes a Java object which uses the FreeTTS java speech synth to read out loud a String, which all works fine. The problem is, when the speech is being read out, the program stops completely until its completed. I'm not an expert on threaded applications, but I understand that usually if I extend the Thread class, and provided my implementation of the speech synth code inside an overridden run method, when I call start on the class it "should" create a new Thread, and run this code there, allowing the main thread which has the JavaFX GUI on to continue as normal. Any idea why this isn't the case? Thanks a lot in advance!

    Read the article

  • Experience the iPad UI On Your PC

    - by Matthew Guay
    Want to test drive iPad without heading over to an Apple store?  Here’s a way you can experience some of the iPad UI straight from your browser! The iPad is the latest gadget from Apple to wow the tech world, and people even waited in line all night to be one of the first to get their hands on one.  Thanks to a simple JavaScript trick, however, you can get a feel for some of its new features without leaving your computer.  This won’t let you try out everything on the iPad, but it will let you see how the new lists and pop-over menus work just like they do in the new apps. Test drive the iPad’s UI from your browser Normally, the Apple iPhone developer library online looks like a standard webpage. But, on the iPad, it looks and feels like a full-blown native iPad app.  With a nifty JavaScript trick from boredzo.org you can use this same interface on your PC.  Since the iPad uses the Safari browser, we ran this test in Safari for Windows.  If you don’t already have it installed, you can download it from Apple (link below) and setup as normal. Now, open Safari and browse to Apple’s developer page at: http://www.developer.apple.com   Now, enter the following in the address bar, and press Enter. javascript:localStorage.setItem('debugSawtooth', 'true')   Finally, click this link to go to the iPhone OS documentation. http://developer.apple.com/iphone/library/iPad/ After a short delay, it should open in full iPad style! The left menu works just like the menus on the iPad, complete with transitions.  It feels entirely like a native application, instead of a webpage.  To scroll through text, click and pull up or down similar to the way you would use it on a touch screen. Some pages even include a pop-over menu like many of the new iPad apps use. Note that the page will be rendered for the size of your browser, and if you resize your window the page will not resize with it.  Simply press F5 to reload the page, and it will resize to fit the new window size.  If you resize your window to be tall and narrow, like the iPad in horizontal mode, the webpage will change and the left menu will disappear in lieu of a drop-down menu just like it would if you rotated the iPad. This works in Chrome as well, since it, like Safari, is based on Webkit.  However, it didn’t seem to work in our test on Firefox or other browsers. We’ve previously covered how you can experience some of the iPhone’s UI with the online iPhone user guide.  Check it out if you haven’t yet: View Mobile Websites in Windows with Safari 4 Developer Tools Conclusion Although this doesn’t let you really try out all of the iPad’s interface, it at least gives you a taste of how it works.  It’s exciting to see how much functionality can be packed into webapps today.  And don’t forget, How-to Geek is giving away an iPad to a random fan!  Head over to our Facebook page and fan How-to Geek if you haven’t already done so. Win an iPad on the How-To Geek Facebook Fan Page Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]The Complete List of iPad Tips, Tricks, and TutorialsShare Your Windows Vista Experience Index ScoreAnother Blog You Should Subscribe To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

    Read the article

  • Mobile Deals: the Consumer Wants You in Their Pocket

    - by Mike Stiles
    Mobile deals offer something we talk about a lot in social marketing, relevant content. If a consumer is already predisposed to liking your product and gets a timely deal for it that’s easy and convenient to use, not only do you score on the marketing side, it clearly generates some of that precious ROI that’s being demanded of social. First, a quick gut-check on the public’s adoption of mobile. Nielsen figures have 55.5% of US mobile owners using smartphones. If young people are indeed the future, you can count on the move to mobile exploding exponentially. Teens are the fastest growing segment of smartphone users, and 58% of them have one. But the largest demographic of smartphone users is 25-34 at 74%. That tells you a focus on mobile will yield great results now, and even better results straight ahead. So we can tell both from statistics and from all the faces around you that are buried in their smartphones this is where consumers are. But are they looking at you? Do you have a valid reason why they should? Everybody likes a good deal. BIA/Kelsey says US consumers will spend $3.6 billion this year for daily deals (the Groupons and LivingSocials of the world), up 87% from 2011. The report goes on to say over 26% of small businesses are either "very likely" or "extremely likely" to offer up a deal in the next 6 months. Retail Gazette reports 58% of consumers shop with coupons, a 40% increase in 4 years. When you consider that a deal can be the impetus for a real-world transaction, a first-time visit to a store, an online purchase, entry into a loyalty program, a social referral, a new fan or follower, etc., that 26% figure shows us there’s a lot of opportunity being left on the table by brands. The existing and emerging technologies behind mobile devices make the benefits of offering deals listed above possible. Take how mobile payment systems are being tied into deal delivery and loyalty programs. If it’s really easy to use a coupon or deal, it’ll get used. If it’s complicated, it’ll be passed over as “not worth it.” When you can pay with your mobile via technologies that connects store and user, you get the deal, you get the loyalty credit, you pay, and your receipt is uploaded, all in one easy swipe. Nothing to keep track of, nothing to lose or forget about. And the store “knows” you, so future offers will be based on your tastes. Consider the endgame. A customer who’s a fan of your belt buckle store’s Facebook Page is in one of your physical retail locations. They pull up your app, because they’ve gotten used to a loyalty deal being offered when they go to your store. Voila. A 10% discount active for the next 30 minutes. Maybe the app also surfaces social references to your brand made by friends so they can check out a buckle someone’s raving about. If they aren’t a fan of your Page or don’t have your app, perhaps they’ve opted into location-based deal services so you can still get them that 10% deal while they’re in the store. Or maybe they’ve walked in with a pre-purchased Groupon or Living Social voucher. They pay with one swipe, and you’ve learned about their buying preferences, credited their loyalty account and can encourage them to share a pic of their new buckle on social. Happy customer. Happy belt buckle company. All because the brand was willing to use the tech that’s available to meet consumers where they are, incentivize them, and show them how much they’re valued through rewards.

    Read the article

  • Facebook: Social Widgets versus Share

    - by just_wes
    Hello all, I am interested in people's thoughts on Facebook's new social widgets thing. Most notably the new "Like" button. The concept I am struggling with is the difference between "Like" and "Share". I have an existing Connect application. This application has its own fan page on Facebook. People can become "Fans" of the page and register to receive email updates and the like. The application is currently programmed to update its own fan page any time content is added to the site. Enter Social Widgets and "Like". People who visit our site can currently "share" our content on Facebook. With "Share" they can post a full item to their wall with a comment or send the content item as a message to another Facebook user. "Like" seems to do the same thing minus the message part. However "Like" automatically subscribes people to the fan page. My question is simply, should I add "Like" to my existing Connect site? Is "Like" different than what I already have? Are Social Widgets the future of Connect? Thanks!

    Read the article

  • Now Customers Can Actually Locate Your Resources with URL Rewriter 2.0 RTW

    - by The Official Microsoft IIS Site
    Today, Microsoft announced the final release of IIS URL Rewriter 2.0 RTW . Now the first reason might be obvious why you would want to rewrite a URL – when you are at a cocktail party with loud music and tasty appetizers and a potential customer asks you where they can get more info on your snazzy new idea. And you proudly blurt out next to their ear over the roar of the bass, “Just go to h-t-t-p colon slash slash w-w-w dot my new idea dot com slash items dot a-s-p-x question mark cat ID equals new...(read more)

    Read the article

  • Macbook won't read disk

    - by Gracie
    I have a macbook that I erased the original iOS on to restart with Ubuntu but when I put in my home burned disk it doesn't read it correctly and makes loud clicking noises. I burned it on a TDK CD-R80 700 MB CD from Windows 7 and even did the confirm to make sure it burned correctly. It has never read CDs like that before, so it's weird. Should I just make another CD? Or is there something wrong with the Macbook.

    Read the article

  • Most Unprofessional Workplace

    - by TehGrumpyCoder
    I've worked lots of places in lots of roles: Delivery truck driver, Boilermaker, antenna rigger, Professional Musician, Electronic Technician, Electrical Engineer, and for most of my career: Software Turkey. I want to say this large company is the most unprofessional place I've ever worked, but then I think about other jobs such as TTI that stiffed us all for 10 months salary -- or had us work 2-1/2 years at 66% however you want to look at it, or maybe NeoPlanet with a cast from a bad sitcom running the show, I could go on, but I digress (as usual). So maybe this place isn't the *most* unprofessional, but the personnel rank up there. I'm in a small room off a factory. There are 3 managerial offices, and 36 common-folk of various skill-sets in a variety of single to quad cubicles. No matter where you sit though, because of the layout and location, you've got a hard wall as one wall of your cubicle. Because of that hard wall, everything echoes. I get off the phone, and the guy in the next cubicle makes a comment in response to my phone conversation... I hate that it can be heard and I hate that they do that! These people have no problem yelling from cube to cube to carry on running conversations some of which are actually work-related. There's a lady two cubes away that talks so loud I can clearly hear every phone conversation she has... all work-related but still... Then the one in the next cubicle must have been raised on a farm because there's only one volume setting: LOUD... "HEY MARGE, CAN I GET IN FOR A QUICK APPOINTMENT AFTER WORK TONIGHT?" ... sigh Also that cube is the 'party cube' so that's where all the candy, cake, donuts, and leftovers sits. Anything MzLoud brings in has to have a verbal recipe associated with it at least 10 times during the day, and of course at volume. I've had running conversations over the top of my cube from people in the next one on each side. The weird thing is... the boss sits with an open door closer to this whole fiasco than me. So I wear a pair of Bose noise-cancelling headphones, and crank up Kenny Burrell, Herb Ellis, Wes Montgomery, or Jimmy Smith to the point I can't hear the racket... what the heck, I already have a hearing loss from playing guitar.

    Read the article

  • Microsoft Plays the Open Source Software Game

    OS Roundup: Microsoft appears to have woken up to the fact that free open-source Office clones may be the thin end of a very slippery wedge. Its response is loud and clear, as it tells the world, when it comes to operating systems Microsoft intends to be a formidable competitor for some time to come.

    Read the article

  • Microsoft Plays the Open Source Software Game

    OS Roundup: Microsoft appears to have woken up to the fact that free open-source Office clones may be the thin end of a very slippery wedge. Its response is loud and clear, as it tells the world, when it comes to operating systems Microsoft intends to be a formidable competitor for some time to come.

    Read the article

  • Automatically adjust the volume based on content?

    - by megas
    In different audio sources the level of sounds are different. It's very annoying to set the level of sound on almost every media content. Sometimes, when before you had something quiet, you had to adjust it more louder and after some time you want to play another media - bang! it unexpectedly breaks your headphones, the sound is so loud! So, is there some plugin/feature which can automatically adjust the level of sound on every media content?

    Read the article

  • What is the laptop that FULLY compatible with Ubuntu?

    - by user63187
    i have met alot of problems with all ubuntu releases on my current laptop (DELL inspiron N4030), such as: out loud fan low battery life screen brightness returns to maximum after every startup weak support for my VGA (Mobility Radeon HD 5430 Series ATI card) ubuntu is probably not scaling my processors correctly sometimes ubuntu hangs after return from suspend sometimes ubuntu doesn't shutdown correctly Now, it's time to change my laptop for good, Can you HELP me to choose a laptop that FULLY compatible with ubuntu releases, please notice that Not every laptop are available in libyan markets.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >