Search Results

Search found 413 results on 17 pages for 'mov'.

Page 16/17 | < Previous Page | 12 13 14 15 16 17  | Next Page >

• How to Convert Videos to 3GP for Mobile Phones

  - by DigitalGeekery

  Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• Ti Launchpad

  - by raysmithequip

  Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now.  Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself.  That would of been the web expressions 4 I bought a few weeks back.  With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd.  No cd.  I had already downloaded IAR  another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit.  Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity.  But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box.  The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI.  It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit.  Assembly.  I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore.  Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future.  I may document the code here.  Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob.  For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat.  Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored.  If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

  Read the article

• Google Analytics recording event based on <a> title attribute

  - by rlsaj

  I am declaring: var title = (typeof(el.attr('title')) != 'undefined' ) ? el.attr('title') :""; and then have the following: else if (title.match(/^"Matching Content"\:/i)) { elEv.category = "Matching Content Click"; elEv.action = "click-Matching-Content"; elEv.label = href.replace(/^https?\:\/\//i, ''); elEv.non_i = true; elEv.loc = href; } However, using Google Analytics debugger this is not being recorded. Any suggestions? The complete function is: if (typeof jQuery != 'undefined') { jQuery(document).ready(function gLinkTracking($) { var filetypes = /\.(avi|csv|dat|dmg|doc.*|exe|flv|gif|jpg|mov|mp3|mp4|msi|pdf|png|ppt.*|rar|swf|txt|wav|wma|wmv|xls.*|zip)$/i; var baseHref = ''; if (jQuery('base').attr('href') != undefined) baseHref = jQuery('base').attr('href'); jQuery('a').on('click', function (event) { var el = jQuery(this); var track = true; var href = (typeof(el.attr('href')) != 'undefined' ) ? el.attr('href') :""; var title = (typeof(el.attr('title')) != 'undefined' ) ? el.attr('title') :""; var isThisDomain = href.match(document.domain.split('.').reverse()[1] + '.' + document.domain.split('.').reverse()[0]); if (!href.match(/^javascript:/i)) { var elEv = []; elEv.value=0, elEv.non_i=false; if (href.match(/^mailto\:/i)) { elEv.category = "Email link"; elEv.action = "click-email"; elEv.label = href.replace(/^mailto\:/i, ''); elEv.loc = href; } else if (title.match(/^"Matching Content"\:/i)) { elEv.category = "Matching Content Click"; elEv.action = "click-Matching-Content"; elEv.label = href.replace(/^https?\:\/\//i, ''); elEv.non_i = true; elEv.loc = href; } else if (href.match(filetypes)) { var extension = (/[.]/.exec(href)) ? /[^.]+$/.exec(href) : undefined; elEv.category = "File Downloaded"; elEv.action = "click-" + extension[0]; elEv.label = href.replace(/ /g,"-"); elEv.loc = baseHref + href; } else if (href.match(/^https?\:/i) && !isThisDomain) { elEv.category = "External link"; elEv.action = "click-external"; elEv.label = href.replace(/^https?\:\/\//i, ''); elEv.non_i = true; elEv.loc = href; } else if (href.match(/^tel\:/i)) { elEv.category = "Telephone link"; elEv.action = "click-telephone"; elEv.label = href.replace(/^tel\:/i, ''); elEv.loc = href; } else track = false; if (track) { _gaq.push(['_trackEvent', elEv.category.toLowerCase(), elEv.action.toLowerCase(), elEv.label.toLowerCase(), elEv.value, elEv.non_i]); if ( el.attr('target') == undefined || el.attr('target').toLowerCase() != '_blank') { setTimeout(function() { location.href = elEv.loc; }, 400); return false; } } } }); }); }

  Read the article

• ffmpeg hangs when creating a video

  - by FearUs

  I am trying to insert an audio channel with a video: first of all I extract the audio from the original video for processing: ffmpeg -i lotr.mp4 lotr.wav I then extract all frames for later processing too: ffmpeg -i lotr.mp4 -f image2 %d.jpg When done processing audio and video streams, I try to create the video ffmpeg -f image2 -r 15 -i %d.jpg new.mp4 then merge with the audio: ffmpeg -i new.mp4 -i lotr.wav -map 0:0 -map 1:0 new_w_audio.mp4 Result: CPU activity = 100%, the process hangs and never returns. PS: I even tried it without modifying the images or the audio (so just trying to unpack then repack the video) but still the same output FFmpeg version SVN-r26400, Copyright (c) 2000-2011 the FFmpeg developers built on Jan 18 2011 04:07:05 with gcc 4.4.2 configuration: --enable-gpl --enable-version3 --enable-libgsm --enable-libvorb is --enable-libtheora --enable-libspeex --enable-libmp3lame --enable-libopenjpeg --enable-libschroedinger --enable-libopencore_amrwb --enable-libopencore_amrnb --enable-libvpx --disable-decoder=libvpx --arch=x86 --enable-runtime-cpudetect - -enable-libxvid --enable-libx264 --enable-librtmp --extra-libs='-lrtmp -lpolarss l -lws2_32 -lwinmm' --target-os=mingw32 --enable-avisynth --enable-w32threads -- cross-prefix=i686-mingw32- --cc='ccache i686-mingw32-gcc' --enable-memalign-hack libavutil 50.36. 0 / 50.36. 0 libavcore 0.16. 1 / 0.16. 1 libavcodec 52.108. 0 / 52.108. 0 libavformat 52.93. 0 / 52.93. 0 libavdevice 52. 2. 3 / 52. 2. 3 libavfilter 1.74. 0 / 1.74. 0 libswscale 0.12. 0 / 0.12. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'new.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf52.93.0 Duration: 00:00:29.66, start: 0.000000, bitrate: 193 kb/s Stream #0.0(und): Video: mpeg4, yuv420p, 200x134 [PAR 1:1 DAR 100:67], 192 k b/s, 15 fps, 15 tbr, 15 tbn, 15 tbc Metadata: creation_time : 1970-01-01 00:00:00 [wav @ 01fed010] max_analyze_duration reached Input #1, wav, from 'lotr.wav': Duration: 00:00:29.90, bitrate: 176 kb/s Stream #1.0: Audio: pcm_s16le, 11025 Hz, 1 channels, s16, 176 kb/s File 'new_w_audio.mp4' already exists. Overwrite ? [y/N] y [buffer @ 01b03820] w:200 h:134 pixfmt:yuv420p Output #0, mp4, to 'new_w_audio.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf52.93.0 Stream #0.0(und): Video: mpeg4, yuv420p, 200x134 [PAR 1:1 DAR 100:67], q=2-3 1, 200 kb/s, 15 tbn, 15 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1: Audio: aac, 11025 Hz, 1 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding

  Read the article

• nginx+django serving static files

  - by avalore

  I have followed instruction for setting up django with nginx from the django wiki (https://code.djangoproject.com/wiki/DjangoAndNginx) and have nginx setup as follows (a few name changes to fit my setup). user nginx nginx; worker_processes 2; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /static/ { root /srv/static/; } location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js|mov) { access_log off; expires 30d; } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_param REMOTE_ADDR $remote_addr; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } } Static files aren't being served (nginx 404). If I look in the access log it seems nginx is looking in /etc/nginx/html/static... rather than /srv/static/ as specified in the config. I've no clue why it's doing this, any help would be hugely appreciated.

  Read the article

• Efficiency of data structures in C99 (possibly affected by endianness)

  - by Ninefingers

  Hi All, I have a couple of questions that are all inter-related. Basically, in the algorithm I am implementing a word w is defined as four bytes, so it can be contained whole in a uint32_t. However, during the operation of the algorithm I often need to access the various parts of the word. Now, I can do this in two ways: uint32_t w = 0x11223344; uint8_t a = (w & 0xff000000) >> 24; uint8_t b = (w & 0x00ff0000) >> 16; uint8_t b = (w & 0x0000ff00) >> 8; uint8_t d = (w & 0x000000ff); However, part of me thinks that isn't particularly efficient. I thought a better way would be to use union representation like so: typedef union { struct { uint8_t d; uint8_t c; uint8_t b; uint8_t a; }; uint32_t n; } word32; Using this method I can assign word32 w = 0x11223344; then I can access the various parts as I require (w.a=11 in little endian). However, at this stage I come up against endianness issues, namely, in big endian systems my struct is defined incorrectly so I need to re-order the word prior to it being passed in. This I can do without too much difficulty. My question is, then, is the first part (various bitwise ands and shifts) efficient compared to the implementation using a union? Is there any difference between the two generally? Which way should I go on a modern, x86_64 processor? Is endianness just a red herring here? I could inspect the assembly output of course, but my knowledge of compilers is not brilliant. I would have thought a union would be more efficient as it would essentially convert to memory offsets, like so: mov eax, [r9+8] Would a compiler realise that is what happening in the bit-shift case above? If it matters, I'm using C99, specifically my compiler is clang (llvm). Thanks in advance.

  Read the article

• How to remove music/videos DRM protection and convert to Mobile Devices such as iPod, iPhone, PSP, Z

  - by tonywesley

  The music/video files you purchased from online music stores like iTunes, Yahoo Music or Wal-Mart are under DRM protection. So you can't convert them to the formats supported by your own mobile devices such as Nokia phone, Creative Zen palyer, iPod, PSP, Walkman, Zune… You also can't share your purchased music/videos with your friends. The following step by step tutorial is dedicated to instructing music lovers to how to convert your DRM protected music/videos to mobile devices. Method 1: If you only want to remove DRM protection from your protected music, this method will not spend your money. Step 1: Burn your protected music files to CD-R/RW disc to make an audio CD Step 2: Find a free CD Ripper software to convert the audio CD track back to MP3, WAV, WMA, M4A, AAC, RA… Method 2: This guide will show you how to crack drm from protected wmv, wma, m4p, m4v, m4a, aac files and convert to unprotected WMV, MP4, MP3, WMA or any video and audio formats you like, such as AVI, MP4, Flv, MPEG, MOV, 3GP, m4a, aac, wmv, ogg, wav... I have been using Media Converter software, it is the quickest and easiest solution to remove drm from WMV, M4V, M4P, WMA, M4A, AAC, M4B, AA files by quick recording. It gets audio and video stream at the bottom of operating system, so the output quality is lossless and the conversion speed is fast . The process is as follows. Step 1: Download and install the software Step 2: Run the software and click "Add…" button to load WMA or M4A, M4B, AAC, WMV, M4P, M4V, ASF files Step 3: Choose output formats. If you want to convert protected audio files, please select "Convert audio to" list; If you want to convert protected video files, please select "Convert video to" list. Step 4: You can click "Settings" button to custom preference for output files. Click "Settings" button bellow "Convert audio to" list for protected audio files Click "Settings" button bellow "Convert video to" list for protected video files Step 5: Start remove DRM and convert your DRM protected music and videos by click on "Start" button. What is DRM? DRM, which is most commonly found in movies and music files, doesn't mean just basic copy-protection of video, audio and ebooks, but it basically means full protection for digital content, ranging from delivery to end user's ways to use the content. We can remove the Drm from video and audio files legally by quick recording.

  Read the article

• Where are the function literals in c++?

  - by academicRobot

  First of all, maybe literals is not the right term for this concept, but its the closest I could think of (not literals in the sense of functions as first class citizens). The idea is that when you make a conventional function call, it compiles to something like this: callq <immediate address> But if you make a function call using a function pointer, it compiles to something like this: mov <memory location>,%rax callq *%rax Which is all well and good. However, what if I'm writing a template library that requires a callback of some sort with a specified argument list and the user of the library is expected to know what function they want to call at compile time? Then I would like to write my template to accept a function literal as a template parameter. So, similar to template <int int_literal> struct my_template {...};` I'd like to write template <func_literal_t func_literal> struct my_template {...}; and have calls to func_literal within my_template compile to callq <immediate address>. Is there a facility in C++ for this, or a work around to achieve the same effect? If not, why not (e.g. some cataclysmic side effects)? How about C++0x or another language? Solutions that are not portable are fine. Solutions that include the use of member function pointers would be ideal. I'm not particularly interested in being told "You are a <socially unacceptable term for a person of low IQ>, just use function pointers/functors." This is a curiosity based question, and it seems that it might be useful in some (albeit limited) applications. It seems like this should be possible since function names are just placeholders for a (relative) memory address, so why not allow more liberal use (e.g. aliasing) of this placeholder. p.s. I use function pointers and functions objects all the the time and they are great. But this post got me thinking about the don't pay for what you don't use principle in relation to function calls, and it seems like forcing the use of function pointers or similar facility when the function is known at compile time is a violation of this principle, though a small one.

  Read the article

• Where are the function literals c++?

  - by academicRobot

  First of all, maybe literals is not the right term for this concept, but its the closest I could think of (not literals in the sense of functions as first class citizens). The idea is that when you make a conventional function call, it compiles to something like this: callq <immediate address> But if you make a function call using a function pointer, it compiles to something like this: mov <memory location>,%rax callq *%rax Which is all well and good. However, what if I'm writing a template library that requires a callback of some sort with a specified argument list and the user of the library is expected to know what function they want to call at compile time? Then I would like to write my template to accept a function literal as a template parameter. So, similar to template <int int_literal> struct my_template {...};` I'd like to write template <func_literal_t func_literal> struct my_template {...}; and have calls to func_literal within my_template compile to callq <immediate address>. Is there a facility in C++ for this, or a work around to achieve the same effect? If not, why not (e.g. some cataclysmic side effects)? How about C++0x or another language? Solutions that are not portable are fine. Solutions that include the use of member function pointers would be ideal. I'm not particularly interested in being told "You are a <socially unacceptable term for a person of low IQ>, just use function pointers/functors." This is a curiosity based question, and it seems that it might be useful in some (albeit limited) applications. It seems like this should be possible since function names are just placeholders for a (relative) memory address, so why not allow more liberal use (e.g. aliasing) of this placeholder. p.s. I use function pointers and functions objects all the the time and they are great. But this post got me thinking about the don't pay for what you don't use principle in relation to function calls, and it seems like forcing the use of function pointers or similar facility when the function is known at compile time is a violation of this principle, though a small one.

  Read the article

• FFmpeg extract clip - stream frame rate differs from container frame rate (x264, aac)

  - by fideli

  Summary H.264 video seems to have a really high frame rate that requires a scaling factor to the applied to the duration of video that I'm trying to extract (900x lower). Body I'm trying to extract a clip from a movie that I have in MP4 format (created using Handbrake). After trying mencoder and VLC, I decided to give FFmpeg a shot since it was the least troublesome when it came to copying the codecs. That is, compared to mencoder and VLC, the resulting file was still playable in QuickTime (I know about Perian, etc, I'm just trying to learn how all this works). Anyway, my command was as follows: ffmpeg -ss 01:15:51 -t 00:05:59 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 During the copy, The following comes up: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from outofsight.mp4': Duration: 01:57:42.10, start: 0.000000, bitrate: 830 kb/s Stream #0.0(und): Video: h264, yuv420p, 720x384, 25 tbr, 22500 tbn, 45k tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16 Output #0, mp4, to 'out.mp4': Stream #0.0(und): Video: libx264, yuv420p, 720x384, q=2-31, 90k tbn, 22500 tbc Stream #0.1(eng): Audio: libfaac, 48000 Hz, stereo, s16 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 2591 fps=2349 q=-1.0 size= 8144kB time=101.60 bitrate= 656.7kbits/s … Instead of a 5:59 duration clip, I get the entire rest of the movie. So, to test this, I ran the ffmpeg command with -t 00:00:01. What I got was exactly a 15:00 minute clip. So I did some black box engineering and decided to scale my -t option by calculating what value to enter given that 1 second was interpreted as 900 s. For my desired 359 s clip, I calculated 0.399 s and so my ffmpeg command became: ffmpeg -ss 01:15.51 -t 00:00:00.399 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 This works, but I have no idea why the duration is scaled by 900. Investigating further, each ffmpeg run has the line: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) 45000/25 = 1800. Must be a relation somewhere. Somehow, the obscenely high frame rate is causing issues with the timing. How is that frame rate so high? The best part about this is that the resulting clip.mp4 has the exact same feature (due to the copied video codec), and taking further clips from this needs the same scaling for the -t duration option. Therefore, I've made it available for anyone willing to check this out. Appendix The preamble for ffmpeg on my system (built using MacPorts ffmpeg port): FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/opt/local --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-avfilter --enable-avfilter-lavf --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libdirac --enable-libschroedinger --enable-libfaac --enable-libfaad --enable-libxvid --enable-libx264 --mandir=/opt/local/share/man --enable-shared --enable-pthreads --cc=/usr/bin/gcc-4.2 --arch=x86_64 libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 1. 4. 0 / 1. 4. 0 libswscale 1. 7. 1 / 1. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jan 4 2010 21:51:51, gcc: 4.2.1 (Apple Inc. build 5646) (dot 1)

  Read the article

• FFmpeg extract clip - stream frame rate differs from container frame rate (x264, aac)

  - by fideli

  Summary H.264 video seems to have a really high frame rate that requires a scaling factor to the applied to the duration of video that I'm trying to extract (900x lower). Body I'm trying to extract a clip from a movie that I have in MP4 format (created using Handbrake). After trying mencoder and VLC, I decided to give FFmpeg a shot since it was the least troublesome when it came to copying the codecs. That is, compared to mencoder and VLC, the resulting file was still playable in QuickTime (I know about Perian, etc, I'm just trying to learn how all this works). Anyway, my command was as follows: ffmpeg -ss 01:15:51 -t 00:05:59 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 During the copy, The following comes up: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from outofsight.mp4': Duration: 01:57:42.10, start: 0.000000, bitrate: 830 kb/s Stream #0.0(und): Video: h264, yuv420p, 720x384, 25 tbr, 22500 tbn, 45k tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16 Output #0, mp4, to 'out.mp4': Stream #0.0(und): Video: libx264, yuv420p, 720x384, q=2-31, 90k tbn, 22500 tbc Stream #0.1(eng): Audio: libfaac, 48000 Hz, stereo, s16 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 2591 fps=2349 q=-1.0 size= 8144kB time=101.60 bitrate= 656.7kbits/s … Instead of a 5:59 duration clip, I get the entire rest of the movie. So, to test this, I ran the ffmpeg command with -t 00:00:01. What I got was exactly a 15:00 minute clip. So I did some black box engineering and decided to scale my -t option by calculating what value to enter given that 1 second was interpreted as 900 s. For my desired 359 s clip, I calculated 0.399 s and so my ffmpeg command became: ffmpeg -ss 01:15.51 -t 00:00:00.399 -i outofsight.mp4 \ -acodec copy -vcodec copy clip.mp4 This works, but I have no idea why the duration is scaled by 900. Investigating further, each ffmpeg run has the line: Seems stream 0 codec frame rate differs from container frame rate: 45000.00 (45000/1) -> 25.00 (25/1) 45000/25 = 1800. Must be a relation somewhere. Somehow, the obscenely high frame rate is causing issues with the timing. How is that frame rate so high? The best part about this is that the resulting clip.mp4 has the exact same feature (due to the copied video codec), and taking further clips from this needs the same scaling for the -t duration option. Therefore, I've made it available for anyone willing to check this out. Appendix The preamble for ffmpeg on my system (built using MacPorts ffmpeg port): FFmpeg version 0.5, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --prefix=/opt/local --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-avfilter --enable-avfilter-lavf --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libdirac --enable-libschroedinger --enable-libfaac --enable-libfaad --enable-libxvid --enable-libx264 --mandir=/opt/local/share/man --enable-shared --enable-pthreads --cc=/usr/bin/gcc-4.2 --arch=x86_64 libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 0 / 52.20. 0 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 1. 4. 0 / 1. 4. 0 libswscale 1. 7. 1 / 1. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jan 4 2010 21:51:51, gcc: 4.2.1 (Apple Inc. build 5646) (dot 1) EDIT Not sure whether it was a bug or not, but it seems to be fixed now in my current version of ffmpeg, at least for this video (version 0.6.1 from MacPorts).

  Read the article

• Windows 7 BSOD - ntoskrnl?

  - by Ken Mason

  2 new HP Pavilion notebooks with 7 Home Premium pre-loaded with Norton. My first act was to use the Norton Removal Tool and load ZoneAlarm free and AVG Free. Frequent random BSOD's ever since...I found my way into Debug and have had various reports regarding ntoskrnl, depending on the status of symbols. It's been many years since I played with (DOS 3.x) debug, so this has been a considerable fumble. Excerpts follow and any insights would be greatly appreciated, as I am not a developer: ADDITIONAL_DEBUG_TEXT: Use '!findthebuild' command to search for the target build information. If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols. MODULE_NAME: nt FAULTING_MODULE: fffff8000305d000 nt DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from fffff800030ccb69 to fffff800030cd600 STACK_TEXT: fffff80004d6fd28 fffff800030ccb69 : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt+0x70600 fffff80004d6fd30 000000000000007f : 0000000000000008 0000000080050033 00000000000006f8 fffff80003095e58 : nt+0x6fb69 fffff80004d6fd38 0000000000000008 : 0000000080050033 00000000000006f8 fffff80003095e58 0000000000000000 : 0x7f fffff80004d6fd40 0000000080050033 : 00000000000006f8 fffff80003095e58 0000000000000000 0000000000000000 : 0x8 fffff80004d6fd48 00000000000006f8 : fffff80003095e58 0000000000000000 0000000000000000 0000000000000000 : 0x80050033 fffff80004d6fd50 fffff80003095e58 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : 0x6f8 fffff80004d6fd58 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt+0x38e58 STACK_COMMAND: kb FOLLOWUP_IP: nt+70600 fffff800`030cd600 48894c2408 mov qword ptr [rsp+8],rcx SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt+70600 FOLLOWUP_NAME: MachineOwner IMAGE_NAME: ntoskrnl.exe BUCKET_ID: WRONG_SYMBOLS Followup: MachineOwner ...................................................................... 0: kd !lmi nt Loaded Module Info: [nt] Module: ntkrnlmp Base Address: fffff8000305d000 Image Name: ntkrnlmp.exe Machine Type: 34404 (X64) Time Stamp: 4b88cfeb Sat Feb 27 00:55:23 2010 Size: 5dc000 CheckSum: 545094 Characteristics: 22 perf Debug Data Dirs: Type Size VA Pointer CODEVIEW 25, 19c65c, 19bc5c RSDS - GUID: {7E9A3CAB-6268-45DE-8E10-816E3080A3B7} Age: 2, Pdb: ntkrnlmp.pdb CLSID 4, 19c658, 19bc58 [Data not mapped] Image Type: FILE - Image read successfully from debugger. ntkrnlmp.exe Symbol Type: PDB - Symbols loaded successfully from symbol server. d:\debugsymbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb Load Report: public symbols , not source indexed d:\debugsymbols\ntkrnlmp.pdb\7E9A3CAB626845DE8E10816E3080A3B72\ntkrnlmp.pdb 0: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff80003095e58 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: 2 LAST_CONTROL_TRANSFER: from fffff800030ccb69 to fffff800030cd600 STACK_TEXT: fffff80004d6fd28 fffff800030ccb69 : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffff80004d6fd30 fffff800030cb032 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x69 fffff80004d6fe70 fffff80003095e58 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb2 fffff880089efc60 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!SeAccessCheckFromState+0x58 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b2 fffff800`030cb032 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b2 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2 Followup: MachineOwner I tried running Rootkit Revealer but I don't think it works on x64 systems. Similarly Blacklight seems to have aged off. I'm running Sophos Anti-Rootkit now. So far so good...

  Read the article

• How to Manage Your Movies in Boxee

  - by DigitalGeekery

  Boxee is a free cross platform HTPC application that plays media locally and via the Internet. Today we’ll take a look at how to manage your local movie collection in Boxee. Note: We are using the most recent version of Boxee running on Windows 7. Your experience on an earlier version or a Mac or Linux build may vary slightly. If you are using an earlier version of Boxee, we recommend you update to the current version (0.9.21.11487). The latest update features significant improvements in file and media identification. Naming your Movie Files Proper file naming is important for Boxee to correctly identify your movie files. Before you get started you may want to take some time to name your files properly. Boxee supports the following naming conventions: Lawrence of Arabia.avi Lawrence.of.Arabia.avi Lawrence of Arabia (1962).avi Lawrence.of.Arabia(1962).avi For multi-part movies, you can use .part or .cd to identify first and second parts of the movie. Gettysburg.part1.avi Gettysburg.part2.avi If you are unsure of the correct title of the movie, check with IMDB.com. Supported File Types Boxee supports the following video file types and codecs: AVI, MPEG, WMV, ASF, FLV, MKV, MOV, MP4, M4A, AAC, NUT, Ogg, OGM, RealMedia RAM/RM/RV/RA/RMVB, 3gp, VIVO, PVA, NUV, NSV, NSA, FLI, FLC, and DVR-MS (beta support) CDs, DVDs, VCD/SVCD MPEG-1, MPEG-2, MPEG-4 (SP and ASP, including DivX, XviD, 3ivx, DV, H.263), MPEG-4 AVC (aka H.264), HuffYUV, Indeo, MJPEG, RealVideo, QuickTime, Sorenson, WMV, Cinepak Adding Movie Files to Boxee Boxee will automatically scan your default media folders and add any movie files to My Movies. Boxee will attempt to identify the media and check sources on the web to get data like cover art and other metadata. You can add as many sources to Boxee as you like from your local hard drive, external hard drives or from your network. You will need to make sure you have access to shared folders on the networked computer hosting the media you want to share. You can browse for other folders to scan by selecting Scan Media Folders.   You can also add media files by selecting Settings from the Home screen… Then select Media… and then selecting Add Sources. Browse for your directory and select Add source. Next, you’ll need to select the media type and the type of scanning. You can also change the share name if you’d like. When finished, select Add. You should see a quick notification at the top of the screen that the source was added.   Select Scan source to have Boxee to begin scanning your media files and attempt to properly identify them. Your movies may not show up instantly in My Movies. It will take Boxee some time to fully scan your sources, especially if you have a large collection. Eventually you should see My Movies begin to populate with cover art and metadata.   You can see the progress and find unidentified files by clicking on the yellow arrow to the left, or navigating to the left with your keyboard or remote and selecting Manage Sources.   Here you can see how many files (if any) Boxee failed to identify. To see which titles are unresolved, select Unidentified Files.   Here you’ll find your unresolved files. Select one of the unidentified files to search for the proper movie information. Next, select the Indentify Video icon. Boxee will fill in the title of the file or you edit the title yourself in the text box. Click Search. The results of your search will be displayed. Scroll through and select the title that fits your movie. Check the details of the film to make sure you have the correct title and select Done.   Fixing Incorrectly Indentified Files If you find a movie has been incorrectly identified you can correct it manually. Select the movie. Then search for the correct movie title from the list and select it. When you’re sure you found the correct movie, click Done. Filtering your Movies You can filter your movie collection by genre, or by whether it has been marked as watched or unwatched. When you’ve finished watching a movie, Boxee will mark it as watched.   You can also manually mark a title as watched.   Boxee also features a wide variety of genres by which you can filter the titles in your library. Playing your Movie When you’re ready to start watching a movie, simply select your title.   From here, you can select the “i” icon to read more information about the movie, add it to your queue, or add a shortcut. Click Local File to begin playing.   Now you’re ready to enjoy your movie. If you don’t have a large movie collection or just need more selection, you may want to check out the Netflix App for Boxee. Looking for a Boxee remote? Check out the iPhone App for Boxee. Links Download Boxee IMDB.com Similar Articles Productive Geek Tips Watch Netflix Instant Movies in BoxeeIntegrate Boxee with Media Center in Windows 7Customize the Background in BoxeeUse your iPhone or iPod Touch as a Boxee RemoteGetting Started with Boxee TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free

  Read the article

• CodePlex Daily Summary for Wednesday, May 19, 2010

  CodePlex Daily Summary for Wednesday, May 19, 2010New Projects3FD - Framework For Fast Development: This is a C++ framework that provides a solid error handling structure, garbage collection, multi-threading and portability between compilers. The ...ali test project: test projectAttribute Builder: The Attribute Builder builds an attribute from a lambda expression because it can.BDK0008: it is a food lovers websitecgdigest: cg digest template for non-profit orgCokmez: Bilmuh cokmez duyuru sistemiDot Game: It is a dot game that our Bangladeshi people used to play at their childhood time and their last time when they are poor for working.ESRI Javascript .NET Integration: Visual Studio project that shows how to integrate the Esri Javascript API with .NET Exchange 2010 RBAC Editor (RBAC GUI): Exchange 2010 RBAC Editor (RBAC GUI) Developed in C# and using Powershell behind the scenes RBAC tool to simplfy RBAC administrationFile Validator (Validador de Archivos): Componente que permite realizar la validación de archivos (txt, imagenes, PDF, etc) actualmente solo tiene implementado la parte de los txt, permit...Grip 09 Lab4: GripjPageFlipper: This is a wonderful implementation of page flipper entirely based on HTML 5 <canvas> tag. It means that it can work in any browser that supports HT...Main project: Index bird families and associated species. Malware Analysis and Can Handler: MACH is a tool to organize and catalog your malware analysis canned responses, and to track the topic response lifecycle for forum experts.Perf Web: Performance team web sitePiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统。 PiPiBugNet代码基于ASP.NET 2.0平台开发，编程语言为C#。 PiPiBugNet界面基于Ext JS设计，提供了极佳的用户体验。RemoteDesktop: integrated remote console, desktop and chat utilityRuneScape emulation done right.: RuneScape emulator.Sandkasten: SandkastenSilverlight Metro Theme: Metro Theme for Silverlight.Silverlight Stereoscopy: Stereoscopy with Silverlight.Twitivia: Twitivia is an online trivia service that runs through twitter and is being used as an example set of projects. C#, MVC, Windows Services, Linq ...XPool: A simple school project.New ReleasesDot Game: 'Dot Game' first release: Dot Game first release This is the 'Dot Game' first release.DotNetNuke® Store: 02.01.35: What's New in this release? Bugs corrected: - Fixed a resource for the header in the Category list of the Store Admin module. - Added several test...ESRI Javascript .NET Integration: Map search results in a DataView: Visual Studio 2010 example showing how to pass Map results back to ASP.NET for use in a DataView.Exchange 2010 RBAC Editor (RBAC GUI): RBAC Editor: This binary is still beta (0.0.9.1) but in most case it's very stableExtending C# editor - Outlining, classification: first revision: a couple of bug has been eliminated, performance improvementFloe IRC Client: Floe IRC Client 2010-05 R6: Corrected bug where text would be unexpectedly copied to the clipboard.Floe IRC Client: Floe IRC Client 2010-05 R7: - Fixed bug where text would show up in a query window with someone if they said something on a channel that you are both present on.Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.0.9 GA released: Hi, Today we have released the final version of Visifire v3.0.9 which contains the following enhancements: * Two new properties ActualAxisMin...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.2 GA Released: Hi, Today we have released the final version of Visifire v3.5.2 which contains the following enhancements: Two new properties ActualAxisMinimum a...HB Batch Encoder Mk 2: HB Batch Encoder Mk2 v1.02: Added .mov support.jPageFlipper: jPageFlipper 0.9: This is an initial community preview of jPageFlipper. It's not ready for production usage but has almost all functionality implemented.linq.js - LINQ for JavaScript: ver 2.1.0.0: Add Class Dictionary Lookup Grouping OrderedEnumerable Add Method ToDictionary MemoizeAll Share Let Add Overload ...Microsoft Research Biology Extension for Excel: MSR Biology Extension for Excel - M9: M9 Release includes the following updates to the previous release: > Import / Export support from Excel for multiple file formats > Bug fixes and ...Nifty CSharp Tools: Event Watcher: Event Watcher!Paint.NET Bulk Image Processor: Paint.NET Bulk Image Processor v1.0: This is the initial release of the Paint.NET Bulk Image processor plugin. All feedback is welcome.PiPiBugNet: PiPiBugNet架构设计: PiPiBugNet架构设计，未包含功能实现RuneScape emulation done right.: rc0: Release cantidate 0.Rx Contrib: V1.6: Adding CCR queue as adapter for the ReactiveQueue credits goes to Yuval Mazor http://blogs.microsoft.co.il/blogs/yuvmaz/Silverlight Metro Theme: Silverlight Metro Theme Alpha 1: Silverlight Metro Theme Alpha 1Silverlight Stereoscopy: Silverlight Stereoscopy Alpha 1: Silverlight Stereoscopy Alpha 20100518Stratosphere: Stratosphere 1.0.6.0: Introduced support for batch put Introduced Support for conditional updates and consistent read Added support for select conditions Brought t...VCC: Latest build, v2.1.30518.0: Automatic drop of latest buildVideo Downloader: Example Program - 1.1: Example Program showing the features of the DLL and what can be achieved using it. For DLL Version 1.1.Video Downloader: Version 1.1: Version 1.1 See Home Page for usage and more information regarding new features. Please remember changes at You-Tube can prevent this software from...WatchersNET.TagCloud: WatchersNET.TagCloud 01.06.00: Whats New New Tag Mode: Show Tags from Ventrian.com NewsArticles Module New Tag Mode: Show Tags from Ventrian.com SimpleGallery Module Hyperlin...Windows Double Explorer: WDE v0.4: -optimization -switch to new vst2010 -viewer close now by pressing escape -reorder tabs -send selected fullname or shortnames via email (eye button...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrPHPExcelGMap.NET - Great Maps for Windows Forms & PresentationCustomer Portal Accelerator for Microsoft Dynamics CRMBlogEngine.NETWindows Azure Command-line Tools for PHP DevelopersCassiniDev - Cassini 3.5/4.0 Developers EditionSQL Server PowerShell ExtensionsFluent Ribbon Control Suite

  Read the article

• Not attending the LUGM mini-meetup - 05. Oct 2013

  Not attending a meeting of the LUGM can be fun, too. It's getting a bit of a habit that Ish is organising small gatherings, aka mini-meetups, of the Linux User Group Mauritius/Meta (LUGM) almost every Saturday. There they mainly discuss and talk about various elements of using Linux as ones main operating systems and the possibilities you are going to have. On top of course, some tips & tricks about mastering the command line and initial steps in scripting or even writing HTML. In general, sounds like a good portion of fun and great spirit of community. Unfortunately, I'm usually quite busy with private and family matters during the weekend and so I already signalised that I wouldn't be around. Well, at least not physically... But this Saturday a couple of things worked out faster than expected and so I was hanging out on my machine. I made virtual contact with one of Pawan's messages over on Facebook... And somehow that kicked off some kind of an online game fun on basic configuration of Apache HTTPd 2.2.x, PHP 5.x and how to improve the overall performance of a newly installed blog based on WordPress. Default configuration files Nitin's website finally came alive and despite the dark theme and the hidden Apple 'fanboy' advertisement I was more interested in the technical situation. As with any new installation there is usually quite some adjustment to be done. And Nitin's page was no exception. Unfortunately, out of the box installations of Apache httpd and PHP are too verbose and expose too much information under the hood. You might think that this isn't really a problem at all, well, think about it again after completely reading this article. First, I checked the HTTP response headers - using either Chrome Developer Tools or Firefox Web Developer extension - of Nitin's page and based on that I advised him to lower the noise levels a little bit. It's not really necessary that detailed information about web server software and scripting language has to be published in every response made. Quite a number of script kiddies and exploits actually check for version specifics prior to an attack. So, removing at least version details hardens the system a little bit. In particular, I'm talking about these response values: Server X-Powered-By How to achieve that? By tweaking the configuration files... Namely, we are going to look into the following ones: apache2.conf httpd.conf .htaccess php.ini The above list contains some additional files, I'm talking about in the next paragraphs. Anyway, those are the ones involved. Tweaking Apache Open your favourite text editor and start to modify the apache2.conf. Eventually, you might like to have a quick peak at the file to see whether it is necessary to adjust it or not. Following is a handy combination of commands to get an overview of your active directives: # sudo grep -v '#' /etc/apache2/apache2.conf | grep -v '^$' | less There you keep an eye on those two Apache directives: ServerSignature Off ServerTokens Prod If that's not the case, change them as highlighted above. In order to activate your modifications you have to restart Apache httpd server. On Debian and Ubuntu you might use apache2ctl for that, on other distributions you might have to use service or run the init-scripts again: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Refresh your website and check the HTTP response header. Tweaking PHP5 (a little bit) Next, check your php.ini file with the following statement: # sudo grep -v ';' /etc/php5/apache2/php.ini | grep -v '^$' | less And check the value of expose_php = Off Again, if it's not as highlighted, change it... Some more Apache love Okay, back to Apache it might also be interesting to improve the situation about browser caching and removing more obsolete information. When you run your website against the usual performance checks like Google Page Speed and Yahoo YSlow you might see those check points with bad grades on a standard, default configuration. Well, this can be done easily. Configure entity tags (ETags) ETags are only interesting when you run your websites on a farm of multiple web servers. Removing this data for your static resources is very simple in Apache. As we are going to deal with the HTTP response header information you have to ensure that Apache is capable to manipulate them. First, check your enabled modules: # sudo ls -al /etc/apache2/mods-enabled/ | grep headers And in case that the 'headers' module is not listed, you have to enable it from the available ones: # sudo a2enmod headers Second, check your httpd.conf file (in case it exists): # sudo grep -v '#' /etc/apache2/httpd.conf | grep -v '^$' | less In newer (better said fresh) installations you might have to create a new configuration file below your conf.d folder with your favourite text editor like so: # sudo nano /etc/apache2/conf.d/headers.conf Then, in order to tweak your HTTP responses either check for those lines or add them: Header unset ETagFileETag None In case that your file doesn't exist or those lines are missing, feel free to create/add them. Afterwards, check your Apache configuration syntax and restart your running instances as already shown above: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Add Expires headers To improve the loading performance of your website, you should take some care into the proper configuration of how to leverage the browser's ability to cache certain resources and files. This is done by adding an Expires: value to the HTTP response header. Generally speaking it is advised that you specify a near-future, read: 1 week or a little bit more, for your static content like JavaScript files or Cascading Style Sheets. One solution to adjust this is to put some instructions into the .htaccess file in the root folder of your web site. Of course, this could also be placed into a more generic location of your Apache installation but honestly, I'd like to keep this at the web site level. Following some adjustments I'm currently using on this blog site: # Turn on Expires and set default to 0ExpiresActive OnExpiresDefault A0 # Set up caching on media files for 1 year (forever?)<FilesMatch "\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav)$">ExpiresDefault A29030400Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 1 week<FilesMatch "\.(js|css)$">ExpiresDefault A604800Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 31 days<FilesMatch "\.(gif|jpg|jpeg|png|swf)$">ExpiresDefault A2678400Header append Cache-Control "public"</FilesMatch> As we are editing the .htaccess files, it is not necessary to restart Apache. In case that your web site doesn't load anymore or you're experiencing an error while trying to restart your httpd, check that the 'expires' module is actually an enabled module: # ls -al /etc/apache2/mods-enabled/ | grep expires# sudo a2enmod expires Of course, the instructions above a re not feature complete but I hope that they might provide a better default configuration for your LAMP stack. Resume of the day Within a couple of hours, and while being occupied with an eLearning course on SQL Server 2012, I had some good fun in helping and assisting other LUGM members while they were some kilometers away at Bagatelle. According to other blog articles it seems that Nitin had quite some moments of desperation. Just for the records: At no time it was my intention to either kick his butt or pull a leg on him. Simply, providing some input based on the lessons I've learned over the last couple of years configuring Apache HTTPd and PHP. Check out the other blogs, too: LUGM mini-meetup... Epic! Superb Saturday Linux Meetup And last but not least, the man himself: The end of a new beginning Cheers, and happy community'ing! Updates Due to our weekly Code & Coffee sessions in the MSCC community, I had a chance to talk to Nitin directly and he showed me the problems directly on his machine. This led to update this article hence the paragraphs on enabling the modules 'headers' and 'expires'.

  Read the article

• CodePlex Daily Summary for Wednesday, January 12, 2011

  CodePlex Daily Summary for Wednesday, January 12, 2011Popular ReleasesGoogle URL Shortener API for .NET: Google URL Shortener API v1: According follow specification: http://code.google.com/apis/urlshortener/v1/reference.htmljGestures: a jQuery plugin for gesture events: 0.81: added event substitution for IE updated index.htmlStyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...SQL Monitor - tracking sql server activities: SQL Monitor 3.1 beta 1: 1. support alert message template 2. dynamic toolbar commands depending on functionality 3. fixed some bugs 4. refactored part of the code, now more stable and more clean upFacebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcUmbraco CMS: Umbraco 4.6: The Umbraco 4.6 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login timeout ...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OpenStreetMap 1.1 beta2: This is the beta2 release for the ArcGIS Editor for OpenStreetMap version 1.1. Changes from version 1.0: Multi-part geometries are now supported. Homogeneous relations (consisting of only lines or only polygons) are converted into the appropriate multi-part geometry. Mixed relations and super relations are maintained and tracked in a stand-alone relation table. The underlying editing logic has changed. As opposed to tracking the editing changes upon "Save edit" or "Stop edit" the changes a...Hawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.5: In the case you are running an x86 Windows and you installed Release 1.2.4, you should consider upgrading to this release (1.2.5) as it appears Hawkeye is broken on x86 OS. I apologize for the inconvenience, but it appears Hawkeye 1.2.4 (and probably previous versions) doesn't run on x86 Windows (See issue http://hawkeye.codeplex.com/workitem/7791). This maintenance release fixes this broken behavior. This release comes in two flavors: Hawkeye.125.N2 is the standard .NET 2 build, was compile...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (January 2011): Another release build for daily use; it contains many new features, enhanced compatibility with latest PHP opensource applications and several issue fixes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger. Changes made within this release include following: New features available only in Phalanger. Full support of Multi-Script-Assemblies was implemented; you can build your application into several DLLs now. Deploy them separately t...EnhSim: EnhSim 2.3.0: 2.3.0This release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Changed how flame shoc...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlTweetSharp: TweetSharp v2.0.0.0 - Preview 7: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 7 ChangesFixes the regression issue in OAuth from Preview 6 Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Third Party Library VersionsHammock v1.0.6: http://hammock.codeplex.com Json.NET 3.5 Release 8: http://json.codeplex.comExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.UltimateJB: Ultimate JB 2.03 PL3 KAKAROTO + HERMES + Spoof 3.5: Voici une version attendu avec impatience pour beaucoup : - La version PL3 KAKAROTO intégre ses dernières modification et intégre maintenant le firmware 2.43 !!! Conclusion : - UltimateJB203PSXXXDEFAULTKAKAROTO=> Pas de spoof mais disponible pour les PS3 suivantes : 3.41_kiosk 3.41 3.40 3.30 3.21 3.15 3.10 3.01 2.76 2.70 2.60 2.53 2.43 - UltimateJB203PS341_HERMES => Pas de spoof mais version hermes 4b - UltimateJB203PS341HERMESSPOOF35X => hermes 4b + spoof des firmwares 3.50 et 3.55 au li....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch...New ProjectsASP.NET MVC Scaffolding: Scaffolding package for ASP.NETAstor: OData Explorer: OData ExplorerBasic Users Community: A simple user community with threads and posts.Bukkit Server Manager: BSM makes server managing easy we have multiple type and database support including: MySql, SQLite types: VPS, Dedicated, Home PCCh4CP: Chamber 4 control programDotNetNuke Telerik Library: A set of Telerik wrappers for DotNetNuke module developers to utilize which aren't yet included as of 5.6.1. Eventually this will be offloaded to the core. Enjoy Life: our fypFolderSizeChecker: It suppose to check the size of big folders in specific partition and help user to find the most disk usage location. (It's simple project so please don't expect big and complex algorithms)HomeTeamOnline: This is project of HomeTeamOnlineICSWorld: This is project of ICSWorldIMAP Client for .NET 4.0 using LumiSoft: Develop an IMAP client using this sample project based on the LumiSoft .NET open source project. This project compiles in .NET 4.0 and demonstrates how to pull email using IMAP. The purpose of the project is for email auto processing.MUIExt (Multilingual User Interface Extender): MUIExt makes it easier for SharePoint 2010 users to create multilingual sites. You'll no longer have to live with the MUI limitations or have to manage variations. It's developed in csharp.Phoenix Service Bus: The goal of this pServiceBus is to provide an API and Service Components that would make implementing an ESB Infrastructure in your environment. It's developed in C#, and also have API written for Javascript Clients PhotoSnapper: Home project just to rename photos or .mov files in a folder starting from from a user defined number.redditfier: A windows application to notify redditors with new posts.SharePoint Field Updater: Automatically update sub fields according to a lookup field. For example: Updating field "Contact" will automatically put "Contact Email" and "Address" in the appropriate text fields.TXLCMS: emptyUmbraco Spark engine: Spark macro engine for UmbracoUrdu Translation: Urdu Translation Project WFTestDesign: BizUnit WF is based on BizUnit solution that allows user to define a test using WorkFlow UI, custom activities designed in this extension and general Workflow activities.It's enable also to use breakpoint in test. It's developed in C#.WPF Date Range Slider: A WPF Date Range Slider user control written with C# to allow your users to choose a range of dates using a double thumbed slider control.WPMind Framework for WP7: This project is used to provide some Windows Phone 7 controls for Windows Phone 7 Silverlight developer. Please join us if you are interested in this project.

  Read the article

• Bypass cache for mobile user agents, VARNISH+NGINX+W3CACHE

  - by Mike McGhee

  Right now I'm running Wordpress w/ W3 Cache on nginx with varnish front end. I'm trying to use the WP Touch Pro plugin for wordpress to display mobile sites, but it is not working. Shows the desktop theme still. I've put the mobile user agents in the rejected user agents box in w3 cache. Here is the nginx config w3 cache spit out: BEGIN W3TC Page Cache cache location ~ /wp-content/w3tc/pgcache.*html$ { expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; } location ~ /wp-content/w3tc/pgcache.*gzip$ { gzip off; types {} default_type text/html; expires modified 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; add_header Vary "Accept-Encoding, Cookie"; add_header Content-Encoding gzip; } # END W3TC Page Cache cache # BEGIN W3TC Browser Cache gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } location ~ \.(asf|asx|wax|wmv|wmx|avi|bmp|class|divx|doc|docx|eot|exe|gif|gz|gzip|ico|jpg|jpeg|jpe|mdb|mid|midi|mov|qt|mp3|m4a|mp4|m4v|mpeg|mpg|mpe|mpp|otf|odb|odc|odf|odg|odp|ods|odt|ogg|pdf|png|pot|pps|ppt|pptx|ra|ram|svg|svgz|swf|tar|tif|tiff|ttf|ttc|wav|wma|wri|xla|xls|xlsx|xlt|xlw|zip)$ { expires 31536000s; add_header X-Powered-By "W3 Total Cache/0.9.2.4"; } # END W3TC Browser Cache # BEGIN W3TC Minify core rewrite ^/wp-content/w3tc/min/w3tc_rewrite_test$ /wp-content/w3tc/min/index.php?w3tc_rewrite_test=1 last; rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; # END W3TC Minify core # BEGIN W3TC Page Cache core rewrite ^(.*\/)?w3tc_rewrite_test$ $1?w3tc_rewrite_test=1 last; set $w3tc_rewrite 1; if ($request_method = POST) { set $w3tc_rewrite 0; } if ($query_string != "") { set $w3tc_rewrite 0; } if ($http_host != "mysite.com") { set $w3tc_rewrite 0; } set $w3tc_rewrite2 1; if ($request_uri !~ \/$) { set $w3tc_rewrite2 0; } if ($request_uri ~* "(sitemap(_index)?\.xml(\.gz)?|[a-z0-9_\-]+-sitemap([0-9]+)?\.xml(\.gz)?)") { set $w3tc_rewrite2 1; } if ($w3tc_rewrite2 != 1) { set $w3tc_rewrite 0; } set $w3tc_rewrite3 1; if ($request_uri ~* "(\/wp-admin\/|\/xmlrpc.php|\/wp-(app|cron|login|register|mail)\.php|\/feed\/|wp-.*\.php|index\.php)") { set $w3tc_rewrite3 0; } if ($request_uri ~* "(wp\-comments\-popup\.php|wp\-links\-opml\.php|wp\-locations\.php)") { set $w3tc_rewrite3 1; } if ($w3tc_rewrite3 != 1) { set $w3tc_rewrite 0; } if ($http_cookie ~* "(comment_author|wp\-postpass|wordpress_\[a\-f0\-9\]\+|wordpress_logged_in)") { set $w3tc_rewrite 0; } if ($http_user_agent ~* "(W3\ Total\ Cache/0\.9\.2\.4|iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry9500|blackberry9520|blackberry9530|blackberry9550|blackberry\ 9800|blackberry\ 9780|webos|s8000|bada)") { set $w3tc_rewrite 0; } set $w3tc_ua ""; if ($http_user_agent ~* "(acer\ s100|android|archos5|blackberry9500|blackberry9530|blackberry9550|blackberry\ 9800|cupcake|docomo\ ht\-03a|dream|htc\ hero|htc\ magic|htc_dream|htc_magic|incognito|ipad|iphone|ipod|kindle|lg\-gw620|liquid\ build|maemo|mot\-mb200|mot\-mb300|nexus\ one|opera\ mini|samsung\-s8000|series60.*webkit|series60/5\.0|sonyericssone10|sonyericssonu20|sonyericssonx10|t\-mobile\ mytouch\ 3g|t\-mobile\ opal|tattoo|webmate|webos)") { set $w3tc_ua _high; } set $w3tc_ref ""; set $w3tc_ssl ""; set $w3tc_enc ""; if ($http_accept_encoding ~ gzip) { set $w3tc_enc _gzip; } set $w3tc_ext ""; if (-f "$document_root/wp-content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl.html$w3tc_enc") { set $w3tc_ext .html; } if ($w3tc_ext = "") { set $w3tc_rewrite 0; } if ($w3tc_rewrite = 1) { rewrite .* "/wp- content/w3tc/pgcache/$request_uri/_index$w3tc_ua$w3tc_ref$w3tc_ssl$w3tc_ext$w3tc_enc" last; } # END W3TC Page Cache core And here is what I have in my varnish vcl.. sub vcl_recv { # Add a unique header containing the client address remove req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; # Device detection set req.http.X-Device = "desktop"; if ( req.http.User-Agent ~ "iP(hone|od|ad)" || req.http.User-Agent ~ "Android" ) { set req.http.X-Device = "smart"; } elseif ( req.http.User-Agent ~ "(SymbianOS|BlackBerry|SonyEricsson|Nokia|SAMSUNG|^LG)" ) { set req.http.X-Device = "cell"; } Any help is greatly appreciated, I've been banging my head against this for 2 days..

  Read the article

• Google maps api v3 refreshing away markers

  - by Paul Peelen

  Hi, I am having problems with the google maps API V3. It seems that every time I load my page the maps load (including the markers) and then it does a quick reload and removes all the markers. Am I missing somehting? What am I doing wrong? Here is an example: http://www.PaulPeelen.com/wp-content/uploads/2010/04/SafariScreenSnapz001.mov this is my code: <script type="text/javascript"> <!-- var hash = "{{$sHashLocal}}"; var webroot = "{{$webroot}}"; var map; function initialize() { var latlng = new google.maps.LatLng(59.32045, 18.066902); var myOptions = { zoom: 13, center: latlng, mapTypeId: google.maps.MapTypeId.ROADMAP }; map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); return map; } function getMarkerInfo (infowindow, rack_id) { // Get all the racks $.ajax({ type: "GET", url: webroot+"ajax/getRack/"+hash+"/"+rack_id, cache: false, dataType: "html", success: function(html) { $("#rack_"+rack_id).html(); infowindow.setContent(html); } }); } $(document).ready(function () { map = initialize(); function attachSecretMessage(marker, rack_id) { var infowindow = new google.maps.InfoWindow({ size: new google.maps.Size(50,50) }); google.maps.event.addListener(marker, 'click', function(){ var ret = '<div id="rack_'+rack_id+'" class="rackDiv"><div class="rackDivLoading"><img src="theme/images/loader-small.gif" border="0"/><span>Hämtar data</span></div></div>'; infowindow.setContent(ret); infowindow.open(map,marker); getMarkerInfo(infowindow,rack_id); }); } function addPlacemark (lat,lng,title, rack_id) { var image = new google.maps.MarkerImage('http://www.google.com/intl/en_us/mapfiles/ms/micons/blue-dot.png', new google.maps.Size(32, 32), new google.maps.Point(0,0), new google.maps.Point(0, 32)); var shadow = new google.maps.MarkerImage('http://maps.google.com/mapfiles/shadow50.png', new google.maps.Size(37, 34), new google.maps.Point(0,0), new google.maps.Point(-4, 34)); var location = new google.maps.LatLng(lat,lng); var marker = new google.maps.Marker({ position: location, map: map, icon: image, shadow: shadow}); marker.setTitle(title); attachSecretMessage(marker, rack_id); } // Get all the racks $.ajax({ type: "GET", url: webroot+"ajax/getRacks/"+hash, cache: false, dataType: "xml", success: function(xml) { // Add the results $(xml).find("station").each(function () { rack_id = $(this).find("rack_id").text(); title = $(this).find("description").text(); longitute = parseFloat($(this).find("longitute").text()); latitude = parseFloat($(this).find("latitude").text()); addPlacemark(latitude, longitute, title, rack_id); }); } }); $("#addMark").click(function () { addPlacemark (59.32045, 18.066902); }); // Set size setPageSize(); }); //--> </script> I hope somebody can help me. Best regards, Paul Peelen

  Read the article

• Access violation when accessing a COM object from .Net

  - by Groo

  Dear Sirs, I am sorry if the post is too long, but I would be happy if someone would at least point read the bolded titles, and point me in the right direction. I am having this problem for couple of days, but was unable to found the answer on the net. These are the things I have found out so far. 1. "Access violation" exception crushes my managed application My C# WinForms app sometimes closes with an "Access violation" exception ("Attempted to read or write protected memory"), right in the moment when selecting a TabPage in a windows form TabControl. From the stack trace (try/catch around Application.Run) I can see that the exception happens at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg), called inside UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData). -- Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. -- Stack trace: at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager .System.Windows.Forms.UnsafeNativeMethods .IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext .RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext .RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.Run(ApplicationContext context) at MyApp.Program.Main() 2. The faulting module seems to be a COM object (ChartFX Client Server 6.2) Using WinDbg (with SoS loaded), I caught it on the unmanaged side, inside ChartFX.ClientServer.Core.dll (that's a COM charting component we are using): (ca84.c98c): Access violation - code c0000005 (first chance) First chance exceptions are reported before any exception handling. This exception may be expected and handled. eax=00000000 ebx=06e67c38 ecx=06e67c38 edx=000018c6 esi=06e7df30 edi=317a9e80 eip=31666110 esp=0015e040 ebp=0015e08c iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010246 ChartFX_ClientServer_Core!Ordinal5507+0x97b7: 31666110 8a404d mov al,byte ptr [eax+4Dh] ds:0023:0000004d=?? [edit:] I also wasn't able to get the unmamanged stack details from WinDbg (it said "Stack unwind info not available"): 0:000 kP ChildEBP RetAddr WARNING: Stack unwind information not available. Following frames may be wrong. 0015e08c 3166288b ChartFX_ClientServer_Core!Ordinal5507+0x97b7 0015e394 3165a921 ChartFX_ClientServer_Core!Ordinal5507+0x5f32 0015e480 31678685 ChartFX_ClientServer_Core!Ordinal5496+0x26a 0015e568 3167bef4 ChartFX_ClientServer_Core!Ordinal5492+0x975 0015e668 316a356b ChartFX_ClientServer_Core!Ordinal5492+0x41e4 0015e77c 31709496 ChartFX_ClientServer_Core!Ordinal443+0x5745 0015e7d0 31707f70 ChartFX_ClientServer_Core!Ordinal2584+0x3cdc 0015e7f8 3170817d ChartFX_ClientServer_Core!Ordinal2584+0x27b6 0015e81c 3162fd76 ChartFX_ClientServer_Core!Ordinal2584+0x29c3 0015e86c 7719f8d2 ChartFX_ClientServer_Core!Ordinal899+0x6b6 0015e898 7719f794 USER32!GetMessageW+0x93 0015e910 771a06f6 USER32!GetWindowLongW+0x115 0015e940 771a069c USER32!CallWindowProcW+0x75 0015e960 747fcef4 USER32!CallWindowProcW+0x1b 0015e97c 747fd073 comctl32!Ordinal377+0x5c 0015e9e0 747fd027 comctl32!DefSubclassProc+0x92 0015ea04 747fd4e6 comctl32!DefSubclassProc+0x46 0015ea20 747fd073 comctl32!DefSubclassProc+0x505 0015ea84 747fd118 comctl32!DefSubclassProc+0x92 0015eae4 7719f8d2 comctl32!DefSubclassProc+0x137 3. Bug is not easy to reproduce (although it can be provoked usually in less than 5 min.) I have several Chart instances in several TabPages, and this usually happens while I am switching the tabs. I still don't know how to reproduce it, besides switching those tabs for several minutes before it happens, so I cannot use our source control to reliably find the build which didn't have this problem. I am accessing the charts through the managed AxChart wrapper class (derived from AxHost), which was created by VS designer automatically. 4. What should be my next step? If someone could point me to the next step I should do to find the actual cause, I would be very grateful. Experimenting (removing and returning code) does not do much good, because I don't know how to reproduce it, so it would take large amounts of time on each iteration just to convince myself that the bug is still there. I have found that people often suggest something like "switching compiler optimizations", but since the exception is not thrown deterministically, I don't want to simply rearrange some bytes and hope that it never returns. Thanks a lot in advance! Best regards, Groo

  Read the article

• Cocoa QuickLook initiated by NSTableView Cell

  - by Tristan Seifert

  I have an NSTableView that contains 2 different Columns - one is an NSImageCell that shows a file icon, and the second is a custom subclass of NSTextFieldCell that contains a quick look button on the right of the text. When I click the Quick Look button, the following code is invoked: [[QLPreviewPanel sharedPreviewPanel] makeKeyAndOrderFront:nil]; This does it's job and shows the blank Quick Look panel saying "No Items Selected." After I did a bit of research on the internet, I implemented a custom NSTableView subclass to be the Delegate and Data Source for the Quick Look panel. I get the notification that Quick Look asks if I want to be the delegate, and I respond with return YES. Even though I implement all methods in both QLPreviewPanelDataSource and QLPreviewPanelDelegate, at runtime I get this error on the console: 2010-12-24 15:32:17.235 BackMeUp[4763:80f] clicked: ~/Desktop/HUDTape.mov 2010-12-24 15:32:17.489 BackMeUp[4763:80f] [QL] QLError(): -[QLPreviewPanel setDelegate:] called while the panel has no controller - Fix this or this will raise soon. See comments in QLPreviewPanel.h for -acceptsPreviewPanelControl:/-beginPreviewPanelControl:/-endPreviewPanelControl:. 2010-12-24 15:32:17.490 BackMeUp[4763:80f] [QL] QLError(): -[QLPreviewPanel setDataSource:] called while the panel has no controller - Fix this or this will raise soon. See comments in QLPreviewPanel.h for -acceptsPreviewPanelControl:/-beginPreviewPanelControl:/-endPreviewPanelControl:. 2010-12-24 15:32:17.491 BackMeUp[4763:80f] We can now receive QL Events. 2010-12-24 15:32:18.291 BackMeUp[4763:80f] -[NSPathStore2 stringValue]: unrecognized selector sent to instance 0x5ecb10 2010-12-24 15:32:18.292 BackMeUp[4763:80f] -[NSPathStore2 stringValue]: unrecognized selector sent to instance 0x5ecb10 And the Quick Look panel does not show up, which I find rather odd. The first line above is just that I know the cell has been clicked. Anyways, here is the .m file of the custom table view subclass: // // BackupListTableView.m // BackMeUp // // Created by Tristan Seifert on 12/24/10. // Copyright 2010 24/7 Server. All rights reserved. // #import "BackupListTableView.h" @implementation BackupListTableView - (void) awakeFromNib { } // Quick Look Delegates - (BOOL)acceptsPreviewPanelControl:(QLPreviewPanel *)panel; { [QLPreviewPanel sharedPreviewPanel].delegate = self; [QLPreviewPanel sharedPreviewPanel].dataSource = self; NSLog(@"We can now receive QL Events."); return YES; } - (void)beginPreviewPanelControl:(QLPreviewPanel *)panel { // This document is now responsible of the preview panel // It is allowed to set the delegate, data source and refresh panel. [QLPreviewPanel sharedPreviewPanel].delegate = self; [QLPreviewPanel sharedPreviewPanel].dataSource = self; } - (void)endPreviewPanelControl:(QLPreviewPanel *)panel { // This document loses its responsisibility on the preview panel // Until the next call to -beginPreviewPanelControl: it must not // change the panel's delegate, data source or refresh it. return; } // Quick Look panel data source - (NSInteger)numberOfPreviewItemsInPreviewPanel:(QLPreviewPanel *)panel { return 1; } - (id <QLPreviewItem>)previewPanel:(QLPreviewPanel *)panel previewItemAtIndex:(NSInteger)index { int selectedRow = [self selectedRow]; return [NSURL URLWithString:[[[self dataSource] tableView:self objectValueForTableColumn:fileColumn row:selectedRow] stringValue]]; } // Quick Look panel delegate - (BOOL)previewPanel:(QLPreviewPanel *)panel handleEvent:(NSEvent *)event { // redirect all key down events to the table view return NO; } // This delegate method provides the rect on screen from which the panel will zoom. - (NSRect)previewPanel:(QLPreviewPanel *)panel sourceFrameOnScreenForPreviewItem:(id <QLPreviewItem>)item { NSRect iconRect = [self rectOfColumn:1]; /* // check that the icon rect is visible on screen NSRect visibleRect = [self visibleRect]; // convert icon rect to screen coordinates iconRect = [self convertRectToBase:iconRect]; iconRect.origin = [[self window] convertBaseToScreen:iconRect.origin]; */ return iconRect; } // This delegate method provides a transition image between the table view and the preview panel - (id)previewPanel:(QLPreviewPanel *)panel transitionImageForPreviewItem:(id <QLPreviewItem>)item contentRect:(NSRect *)contentRect { int selectedRow = [self selectedRow]; NSImage *fileIcon = [[NSWorkspace sharedWorkspace] iconForFile:[[[self dataSource] tableView:self objectValueForTableColumn:fileColumn row:selectedRow] stringValue]]; return fileIcon; } @end Thanks for any help.

  Read the article

• Thread Synchronisation 101

  - by taspeotis

  Previously I've written some very simple multithreaded code, and I've always been aware that at any time there could be a context switch right in the middle of what I'm doing, so I've always guarded access the shared variables through a CCriticalSection class that enters the critical section on construction and leaves it on destruction. I know this is fairly aggressive and I enter and leave critical sections quite frequently and sometimes egregiously (e.g. at the start of a function when I could put the CCriticalSection inside a tighter code block) but my code doesn't crash and it runs fast enough. At work my multithreaded code needs to be a tighter, only locking/synchronising at the lowest level needed. At work I was trying to debug some multithreaded code, and I came across this: EnterCriticalSection(&m_Crit4); m_bSomeVariable = true; LeaveCriticalSection(&m_Crit4); Now, m_bSomeVariable is a Win32 BOOL (not volatile), which as far as I know is defined to be an int, and on x86 reading and writing these values is a single instruction, and since context switches occur on an instruction boundary then there's no need for synchronising this operation with a critical section. I did some more research online to see whether this operation did not need synchronisation, and I came up with two scenarios it did: The CPU implements out of order execution or the second thread is running on a different core and the updated value is not written into RAM for the other core to see; and The int is not 4-byte aligned. I believe number 1 can be solved using the "volatile" keyword. In VS2005 and later the C++ compiler surrounds access to this variable using memory barriers, ensuring that the variable is always completely written/read to the main system memory before using it. Number 2 I cannot verify, I don't know why the byte alignment would make a difference. I don't know the x86 instruction set, but does mov need to be given a 4-byte aligned address? If not do you need to use a combination of instructions? That would introduce the problem. So... QUESTION 1: Does using the "volatile" keyword (implicity using memory barriers and hinting to the compiler not to optimise this code) absolve a programmer from the need to synchronise a 4-byte/8-byte on x86/x64 variable between read/write operations? QUESTION 2: Is there the explicit requirement that the variable be 4-byte/8-byte aligned? I did some more digging into our code and the variables defined in the class: class CExample { private: CRITICAL_SECTION m_Crit1; // Protects variable a CRITICAL_SECTION m_Crit2; // Protects variable b CRITICAL_SECTION m_Crit3; // Protects variable c CRITICAL_SECTION m_Crit4; // Protects variable d // ... }; Now, to me this seems excessive. I thought critical sections synchronised threads between a process, so if you've got one you can enter it and no other thread in that process can execute. There is no need for a critical section for each variable you want to protect, if you're in a critical section then nothing else can interrupt you. I think the only thing that can change the variables from outside a critical section is if the process shares a memory page with another process (can you do that?) and the other process starts to change the values. Mutexes would also help here, named mutexes are shared across processes, or only processes of the same name? QUESTION 3: Is my analysis of critical sections correct, and should this code be rewritten to use mutexes? I have had a look at other synchronisation objects (semaphores and spinlocks), are they better suited here? QUESTION 4: Where are critical sections/mutexes/semaphores/spinlocks best suited? That is, which synchronisation problem should they be applied to. Is there a vast performance penalty for choosing one over the other? And while we're on it, I read that spinlocks should not be used in a single-core multithreaded environment, only a multi-core multithreaded environment. So, QUESTION 5: Is this wrong, or if not, why is it right? Thanks in advance for any responses :)

  Read the article

• Add note model in Rails

  - by dannymcc

  Hi Everyone, I am following the 15 minute blog tutorial on Ruby on Rails .com: http://media.rubyonrails.org/video/rails_blog_2.mov and am stumbling into some issues. I am using the following alterations to the names in the tutorial: posts = kases comments = notes I have setup the models as follows: class Kase < ActiveRecord::Base validates_presence_of :jobno has_many :notes belongs_to :company # foreign key: company_id belongs_to :person # foreign key in join table belongs_to :surveyor, :class_name => "Company", :foreign_key => "appointedsurveyor_id" belongs_to :surveyorperson, :class_name => "Person", :foreign_key => "surveyorperson_id" def to_param jobno end and... class Note < ActiveRecord::Base belongs_to :kase end The Notes controller look like this: # POST /notes # POST /notes.xml def create @kase = Kase.find(params[:kase_id]) @note = @kase.notes.build(params[:note]) redirect_to @kase end and the database scheme for Kases looks like this: create_table "notes", :force => true do |t| t.integer "kase_id" t.text "body" t.datetime "created_at" t.datetime "updated_at" end and for kases... create_table "kases", :force => true do |t| t.string "jobno" t.date "dateinstructed" t.string "clientref" t.string "clientcompanyname" t.text "clientcompanyaddress" t.string "clientcompanyfax" t.string "casehandlername" t.string "casehandlertel" t.string "casehandleremail" t.text "casesubject" t.string "transport" t.string "goods" t.string "claimantname" t.string "claimantaddressline1" t.string "claimantaddressline2" t.string "claimantaddressline3" t.string "claimantaddresscity" t.string "claimantaddresspostcode" t.string "claimantcontact" t.string "claimanttel" t.string "claimantmob" t.string "claimantemail" t.string "claimanturl" t.string "lyingatlocationname" t.string "lyingatlocationaddressline1" t.string "lyingatlocationaddressline2" t.string "lyingatlocationaddressline3" t.string "lyingatlocationaddresscity" t.string "lyingatlocationaddresspostcode" t.string "lyingatlocationcontactname" t.string "lyingattel" t.string "lyingatmobile" t.string "lyingatlocationurl" t.text "comments" t.string "invoicenumber" t.string "netamount" t.string "vat" t.string "grossamount" t.date "dateclosed" t.date "datepaid" t.datetime "filecreated" t.string "avatar_file_name" t.string "avatar_content_type" t.integer "avatar_file_size" t.datetime "avatar_updated_at" t.datetime "created_at" t.datetime "updated_at" t.string "kase_status" t.string "invoice_date" t.integer "surveyorperson_id" t.integer "appointedsurveyor_id" t.integer "person_id" t.string "company_id" t.string "dischargeamount" t.string "dishchargeheader" t.text "highrisesubject" end Whenever I enter a note into the kase show view's note entry form: <h2>Notes</h2> <div id="sub-notes"> <%= render :partial => @kase.notes %> </div> <% form_for [@kase, Note.new] do |f| %> <p> <%= f.label :body, "New Note" %><br /> <%= f.text_area :body %> </p> <p><%= f.submit "Add Note" %></p> <% end %> partial: <% div_for note do %> <p> <strong>Created <%= time_ago_in_words(note.created_at) %> ago</strong><br /> <%= h(note.body) %> </p> <% end %> I get the following error: ActiveRecord::RecordNotFound in NotesController#create Couldn't find Kase with ID=Test Case I have tried removing the def to_param jobno end from the kase model, but the same error shows. Any ideas what I'm missing? Thanks, Danny

  Read the article

• Throwing a C++ exception from inside a Linux Signal handler

  - by SoapBox

  As a thought experiment more than anything I am trying to get a C++ exception thrown "from" a linux signal handler for SIGSEGV. (I'm aware this is not a solution to any real world SIGSEGV and should never actually be done, but I thought I would try it out after being asked about it, and now I can't get it out of my head until I figure out how to do it.) Below is the closest I have come, but instead of the signal being caught properly, terminate() is being called as if no try/catch block is available. Anyone know why? Or know a way I can actually get a C++ exception from a signal handler? The code (beware, the self modifying asm limits this to running on x86_64 if you're trying to test it): #include <iostream> #include <stdexcept> #include <signal.h> #include <stdint.h> #include <errno.h> #include <string.h> #include <sys/mman.h> using namespace std; uint64_t oldaddr = 0; void thrower() { cout << "Inside thrower" << endl; throw std::runtime_error("SIGSEGV"); } void segv_handler(int sig, siginfo_t *info, void *pctx) { ucontext_t *context = (ucontext_t *)pctx; cout << "Inside SIGSEGV handler" << endl; oldaddr = context->uc_mcontext.gregs[REG_RIP]; uint32_t pageSize = (uint32_t)sysconf(_SC_PAGESIZE); uint64_t bottomOfOldPage = (oldaddr/pageSize) * pageSize; mprotect((void*)bottomOfOldPage, pageSize*2, PROT_READ|PROT_WRITE|PROT_EXEC); // 48 B8 xx xx xx xx xx xx xx xx = mov rax, xxxx *((uint8_t*)(oldaddr+0)) = 0x48; *((uint8_t*)(oldaddr+1)) = 0xB8; *((int64_t*)(oldaddr+2)) = (int64_t)thrower; // FF E0 = jmp rax *((uint8_t*)(oldaddr+10)) = 0xFF; *((uint8_t*)(oldaddr+11)) = 0xE0; } void func() { try { *(uint32_t*)0x1234 = 123456789; } catch (...) { cout << "caught inside func" << endl; throw; } } int main() { cout << "Top of main" << endl; struct sigaction action, old_action; action.sa_sigaction = segv_handler; sigemptyset(&action.sa_mask); action.sa_flags = SA_SIGINFO | SA_RESTART | SA_NODEFER; if (sigaction(SIGSEGV, &action, &old_action)<0) cerr << "Error setting handler : " << strerror(errno) << endl; try { func(); } catch (std::exception &e) { cout << "Caught : " << e.what() << endl; } cout << "Bottom of main" << endl << endl; } The actual output: Top of main Inside SIGSEGV handler Inside thrower terminate called after throwing an instance of 'std::runtime_error' what(): SIGSEGV Aborted Expected output: Top of main Inside thrower caught inside func Caught : SIGSEGV Bottom of main

  Read the article

• Test whether pixel is inside the blobs for ofxOpenCV

  - by mia

  I am doing an application of the concept of the dodgeball and need to test of the pixel of the ball is in the blobs capture(which is the image of the player) I am stucked and ran out of idea of how to implement it. I manage to do a little progress which have the blobs but I not sure how to test it. Please help. I am a newbie who in a desperate condition. Thank you. This is some of my code. void testApp::setup(){ #ifdef _USE_LIVE_VIDEO vidGrabber.setVerbose(true); vidGrabber.initGrabber(widthS,heightS); #else vidPlayer.loadMovie("fingers.mov"); vidPlayer.play(); #endif widthS = 320; heightS = 240; colorImg.allocate(widthS,heightS); grayImage.allocate(widthS,heightS); grayBg.allocate(widthS,heightS); grayDiff.allocate(widthS,heightS); ////<---what I want bLearnBakground = true; threshold = 80; //////////circle////////////// counter = 0; radius = 0; circlePosX = 100; circlePosY=200; } void testApp::update(){ ofBackground(100,100,100); bool bNewFrame = false; #ifdef _USE_LIVE_VIDEO vidGrabber.grabFrame(); bNewFrame = vidGrabber.isFrameNew(); #else vidPlayer.idleMovie(); bNewFrame = vidPlayer.isFrameNew(); #endif if (bNewFrame){ if (bLearnBakground == true){ grayBg = grayImage; // the = sign copys the pixels from grayImage into grayBg (operator overloading) bLearnBakground = false; } #ifdef _USE_LIVE_VIDEO colorImg.setFromPixels(vidGrabber.getPixels(),widthS,heightS); #else colorImg.setFromPixels(vidPlayer.getPixels(),widthS,heightS); #endif grayImage = colorImg; grayDiff.absDiff(grayBg, grayImage); grayDiff.threshold(threshold); contourFinder.findContours(grayDiff, 20, (340*240)/3, 10, true); // find holes } ////////////circle//////////////////// counter = counter + 0.05f; if(radius>=50){ circlePosX = ofRandom(10,300); circlePosY = ofRandom(10,230); } radius = 5 + 3*(counter); } void testApp::draw(){ // draw the incoming, the grayscale, the bg and the thresholded difference ofSetColor(0xffffff); //white colour grayDiff.draw(10,10);// draw start from point (0,0); // we could draw the whole contour finder // or, instead we can draw each blob individually, // this is how to get access to them: for (int i = 0; i < contourFinder.nBlobs; i++){ contourFinder.blobs[i].draw(10,10); } ///////////////circle////////////////////////// //let's draw a circle: ofSetColor(0,0,255); char buffer[255]; float a = radius; sprintf(buffer,"radius = %i",a); ofDrawBitmapString(buffer, 120, 300); if(radius>=50) { ofSetColor(255,255,255); counter = 0; } else{ ofSetColor(255,0,0); } ofFill(); ofCircle(circlePosX,circlePosY,radius); }

  Read the article

• Where are the function address literals in c++?

  - by academicRobot

  First of all, maybe literals is not the right term for this concept, but its the closest I could think of (not literals in the sense of functions as first class citizens). <UPDATE> After some reading with help from answer by Chris Dodd, what I'm looking for is literal function addresses as template parameters. Chris' answer indicates how to do this for standard functions, but how can the addresses of member functions be used as template parameters? Since the standard prohibits non-static member function addresses as template parameters (c++03 14.3.2.3), I suspect the work around is quite complicated. Any ideas for a workaround? Below the original form of the question is left as is for context. </UPDATE> The idea is that when you make a conventional function call, it compiles to something like this: callq <immediate address> But if you make a function call using a function pointer, it compiles to something like this: mov <memory location>,%rax callq *%rax Which is all well and good. However, what if I'm writing a template library that requires a callback of some sort with a specified argument list and the user of the library is expected to know what function they want to call at compile time? Then I would like to write my template to accept a function literal as a template parameter. So, similar to template <int int_literal> struct my_template {...};` I'd like to write template <func_literal_t func_literal> struct my_template {...}; and have calls to func_literal within my_template compile to callq <immediate address>. Is there a facility in C++ for this, or a work around to achieve the same effect? If not, why not (e.g. some cataclysmic side effects)? How about C++0x or another language? Solutions that are not portable are fine. Solutions that include the use of member function pointers would be ideal. I'm not particularly interested in being told "You are a <socially unacceptable term for a person of low IQ>, just use function pointers/functors." This is a curiosity based question, and it seems that it might be useful in some (albeit limited) applications. It seems like this should be possible since function names are just placeholders for a (relative) memory address, so why not allow more liberal use (e.g. aliasing) of this placeholder. p.s. I use function pointers and functions objects all the the time and they are great. But this post got me thinking about the don't pay for what you don't use principle in relation to function calls, and it seems like forcing the use of function pointers or similar facility when the function is known at compile time is a violation of this principle, though a small one. Edit The intent of this question is not to implement delegates, rather to identify a pattern that will embed a conventional function call, (in immediate mode) directly into third party code, possibly a template.

  Read the article

< Previous Page | 12 13 14 15 16 17  | Next Page >