Search Results

Search found 20223 results on 809 pages for 'multiple monitors'.

Page 16/809 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Extended display - nightmare

  - by user206343

  I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• Have 3 Monitors Display the same thing? (WinXP)

  - by Drew Tenenbaum

  I have a setup in which there is a Computer running windows XP, with 3 monitors plugged into it, with a "Matrox Millennium P750" Graphics card. What I want is to enable mirroring of ALL THREE MONITORS, meaning I want all the monitors to display the same image. In Matrox Powerdesk, it does not have an option to do this, and I'm pretty sure that Windows XP does not support it nativley. I really should only need some software/drivers, right? What can i do to display the same thing on 3 screens?

  Read the article

• Is there an elegant way to track multiple domains under separate accounts with google analytics?

  - by J_M_J

  I have a situation where a content management system uses the same template for multiple websites with different domain names and I can't make a separate template for each. However, each website needs to be tracked with Google analytics. Would this be appropriate to track each domain like this by putting in some conditional code? And would this be robust enough not to break? Is there a more elegant way to do this? <script type="text/javascript"> var _gaq = _gaq || []; switch (location.hostname){ case 'www.aaa.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-1']); break; case 'www.bbb.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-2']); break; case 'www.ccc.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-3']); break; } _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(ga); })(); </script> Just to be clear, each website is a separate domain name and must be tracked separately, NOT different domains with same pages on one analytics profile.

  Read the article

• Directing Multiple ccTLD's to 1 gTLD with a country specific subdirectory?

  - by Pascal Van Opzeeland

  We have multiple ccTLDomains and are thinking about how to best combine these into one. We want to do this to focus our link building efforts. We are running a website through which we offer a software-as-a-service. Therefore we could potentially sell to any country in the world. However, Germany is our most important market. We currently have a .com, .de, .nl. and .pl domain. All these domains have a high amount of unique content pages. What we are planning is to change everything to .com with language-based subdirectories, so .com/en/, .com/de/, etc. I have two questions concerning this issue: 1) How much of an advantage does a ccTLD have over a gTLD with country specific subdirectories in search rankings? So let’s say .de versus .com/de/? 2) How could we best redirect the visitors of our old ccTLD’s to our gTLD’s subdirectories? We would like to loose as few search engine rankings as possible. Thank you for your help.

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• How to map a virtual desktop to a monitor in a multiple monitor setup?

  - by t3

  OS: Microsoft Windows Vista SP2, Microsoft Windows 7 My laptop is plugged to a docking station that supports dual monitors, which I use extensively. I have windows placed where I want them. All is well and predictable with this setup until I un-dock. The moment I un-dock all windows that I placed in the secondary monitor piles up in the primary monitor and it is an unholy mess. So, I am looking for a solution where if I use virtual desktops, one of them can be mapped to a monitor and when un-docked what was there in the secondary monitor stays in a virtual desktop. Do you folks know of a tool or workaround that can address my quandary?

  Read the article

• How to limit / throttle bandwidth with *multiple* connections

  - by Led

  I'm writing an app in C# that downloads concurrently (in different threads) using multiple connections to multiple servers, and I'd like to be able to limit the used bandwidth. For a single connection the solution would be simple; I'd use the solution posted here : http://www.codeproject.com/KB/IP/Bandwidth_throttling.aspx which calculates a sleep-time for the single connection. I'd like to know what the best way is to do this for multiple connections. Using the ThrottledStream posted above and dividing the bandwidth (say 2MB/sec) evenly among the connections isn't right, if I'd have 3 very slow connections and 1 very fast one they'd all be capped to 512kb/sec, so the fast one won't go above 512kb/sec and the other 3 wouldn't even make that. The preferred solution I think is to cap only the fastest connection(s) so the slower connections are used optimally. Does anyone have any experience with this, example code or any advice ?

  Read the article

• Storing multiple checkbox values in database

  - by Madjokr

  Hi, I want to store multiple column values in table.Lets take a example .. What are your favourite colors? the choices can be red,blue,green, orange. So lets assume, the user selects atleast 2 values. Is there any way to store the multiple values in table. I have implemented by concatinating choices of users in a column in the table. I later found that it is a bad practise. Currently i can think of using Bitwise operator and habtm. What are the different ways for storing multiple choices values in table? If I am implementing in rails, What is the best way to implement this with OOP concepts? Is there any builtin options in rails?

  Read the article

• mysql LAST_INSERT_ID() used with multiple records INSERT statement

  - by bogdan

  Hello, If i insert multiple records with a loop that executes a single record insert, the last insert id returned is, as expected, the last one... but if i do a multiple records insert statement: INSERT INTO people (name,age) VALUES('William',25),('Bart',15),('Mary',12); let's say the three above are the first records inserted in the table...after the insert statement i expected last insert id to return 3, but it returned 1...the first insert id for the statement in question... So can someone please confirm if this is the normal behavior of LAST_INSERT_ID() in the context of multiple records INSERT statements...so i can base my code on it thanks :)

  Read the article

• Alternatives to multiple inheritance for my architecture (NPCs in a Realtime Strategy game)?

  - by Brettetete

  Coding isn't that hard actually. The hard part is to write code that makes sense, is readable and understandable. So I want to get a better developer and create some solid architecture. So I want to do create an architecture for NPCs in a video-game. It is a Realtime Strategy game like Starcraft, Age of Empires, Command & Conquers, etc etc.. So I'll have different kinds of NPCs. A NPC can have one to many abilities (methods) of these: Build(), Farm() and Attack(). Examples: Worker can Build() and Farm() Warrior can Attack() Citizen can Build(), Farm() and Attack() Fisherman can Farm() and Attack() I hope everything is clear so far. So now I do have my NPC Types and their abilities. But lets come to the technical / programmatical aspect. What would be a good programmatic architecture for my different kinds of NPCs? Okay I could have a base class. Actually I think this is a good way to stick with the DRY principle. So I can have methods like WalkTo(x,y) in my base class since every NPC will be able to move. But now lets come to the real problem. Where do I implement my abilities? (remember: Build(), Farm() and Attack()) Since the abilities will consists of the same logic it would be annoying / break DRY principle to implement them for each NPC (Worker,Warrior, ..). Okay I could implement the abilities within the base class. This would require some kind of logic that verifies if a NPC can use ability X. IsBuilder, CanBuild, .. I think it is clear what I want to express. But I don't feel very well with this idea. This sounds like a bloated base class with too much functionality. I do use C# as programming language. So multiple inheritance isn't an opinion here. Means: Having extra base classes like Fisherman : Farmer, Attacker won't work.

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• Multiheaded X.org with a single workspace-pool

  - by blauwblaatje

  I've got an idea for x.org/$randomwindowmanager in combination with a multiheaded setup, but I haven't figured out how it should work. Also I don't really know where to place the feature request. Now for the idea. I've been working with screen (wikipedia:GNU_Screen) for some years now. One thing I like about it, is the fact that I can get a multi-display mode (screen -x), so you can have multiple terminals all connected to the same screen. The fun thing about it, is that you can get 2 terminals with the same content and switch my onscreen layout, without moving the terminals. I admit, in screen it's not extremely useful, but I think for a wm it can be. Imagine this. You've got two monitors and 4 workdesks. On one workdesk I've got my IDE with code, on the second one I've got the output, on the third one I've got the documentation and on the forth one I've got my e-mail and IM clients. At one moment, I want my IDE and output on my monitors, another moment my code and documentation and Yet another moment my IM to consult a colleague and documentation or code. Finally my colleague comes to help me at my desk. I'd like it if we could both watch the same workdesk without him sitting on my lap, so I turn one monitor so he can see it better. It would be great if we could see the same thing that's on my monitor (exclude mousepointer). The thing with most WMs is that your workspaces on the two monitors are either separated or glued together. If they're separated, you can change workspaces on each monitor autonomous, but you can't exchange applications between monitors because they're different x-clients (iirc). If they're glued together (xinerama), you can exchange the applications, but when changing your workspace, the other monitors change too. So, what I'd like to know is this. Is this already possible or should I submit a feature request somewhere (and if so, where?)

  Read the article

• Second monitor not detected

  - by Gabriel

  Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

  Read the article

• 3 Monitor PCI-e Graphics card on Linux (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• Linux: 3 Monitor PCI-e Graphics card (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. I'll post the exact error message here soon, but it's very useless. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. Thanks, Nick

  Read the article

• 3 Monitor PCI-e Graphics card (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• Set one background to stretch across multi-monitor display?

  - by John Isaacks

  I have two monitors and my coworker has three. We were wondering if there was a way to set a single background image to stretch across all the monitors. Right now it's the same image but repeated, so it looks like the same image three times in a row. I would like it to be so that the three images/screens combine to show one image if that makes sense. If I can't set one image to stretch across the screens like that, is there a way to set a different background for each screen? Edit: I just wanted to clarify: I am not talking about one image stretching from his monitors to mine, just stretching across our own monitors.

  Read the article

• How can I watch full size video on 1 monitor and work on another?

  - by jasondavis

  Here is my situation. I have 3 monitors hooked up to my new PC running off 2 video cards. When I watch a video on one of the monitors and make it go full screen on that monitor it is great, however as soon as I click anywhere on one of the other 2 monitors, it makes me lose the full screen mode of the video and makes it go back to it's original size. This happens when watching a flash or silverlight based video in Google chrome as well as when I watch video from a player such as iTunes. Is it possible to make a video play fullscreen on one of my monitors and still work in the other two screens without loosing my full screen mode on the one monitor?

  Read the article

• What is the exact problem with multiple inheritance?

  - by Totophil

  I can see people asking all the time whether multiple inheritance should be included into the next version of C# or Java and C++ folks, who are fortunate enough to have this ability, say that this is like giving someone a rope to eventually hang themselves. What’s the matter with the multiple inheritance? Are there any concrete samples?

  Read the article

• Using ViewModels in ASP.NET MVC 2 - multiple forms

  - by Rob Ellis

  I couldn't find any documentation around using multiple forms in an ASP.NET MVC 2 ViewModel approach. i.e. In the built in application when you select New MVC2 web app, the register page uses a ViewPage which inherits like this:- Inherits="System.Web.Mvc.ViewPage" I wanted to use that approach on a page with multiple forms, but that RegisterModel only supported one form.

  Read the article

• MySQL query using multiple criteria from checkboxes

  - by jungle_programmer

  I would like to do a multiple search query usig multiple checkboxes which represent particular textboxes. How do i create a mysql query which will be filtering the checked and unchecked checkboxes (probably using if statements)? The query should be able to filter the checked and ucnchecked boxes and query them using the AND condition. Thanks

  Read the article

• jquery expanding menu+show/hide+multiple instances

  - by mark

  Hi, I have 2 scripts working ok separately but can't get them working together - What I'm after is expanding menus where if the items exceed 10 a 'more' link appears that expands the list, which can also then be hidden. http://www.brianfitzer.ie/test2/ expanding menu is file test12.html toggle+limit: toggle is file test13.html (I have these working separately) And then I need this to be able to be applied in multiple instances as I'll have multiple categories. Any code help greatly appreciated! (i'm a jquery newbie so if you have full code that would be xtra handy)

  Read the article

• Returning the nearest multiple value of a number

  - by mouthpiec

  Hi, I need a function by which I will be able to convert a number to a nearest value of a given multiple. Eg i want an array of number to be set to the neareast multiple of 16, so 2 = 0, 5 = 0, 11 = 16, 17 = 16, 30 = 32 etc thanks

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >